a 10 V Precision Voltage Reference REF01 FEATURES 10 V Output, 0.3% Max Adjustment Range, 3% Min Excellent Temperature Stability, 8.5 ppm/C Max Low Noise, 30 V p-p Max Low Supply Current, 1.4 mA Max Wide Input Voltage Range, 12 V to 40 V High Load Driving Capability, 20 mA No External Components Short Circuit Proof PIN CONFIGURATION TO-99 (J-Suffix) Epoxy MINI-DIP (P-Suffix) 8-Lead Hermetic DIP (Z-Suffix) NC 8-Lead SO (S-Suffix) 8 NC 1 7 VIN 2 NC 6 5 NC 3 NC 1 VOUT TRIM 4 The REF01 precision voltage reference provides a stable 10 V output that can be adjusted over a 3% range with minimal effect on temperature stability. Single-supply operation over an input voltage range of 12 V to 40 V, a low current drain of 1 mA, and excellent temperature stability are achieved with an improved band gap design. Low cost, low noise, and low power make the REF01 an excellent choice whenever a stable voltage reference is required. Applications include D/A and A/D converters, portable instrumentation, and digital voltmeters. Full military temperature range devices with screening to MIL-STD-883 are available. For new designs, please refer to ADR01. REF01 GND 4 GROUND (CASE) GENERAL DESCRIPTION 8 NC NC TOP VIEW NC 3 (Not to Scale) 6 VOUT VIN 2 7 5 TRIM NC = NO CONNECT* NC = NO CONNECT* *NC = No Connect. Do not connect anything on these pins as some of them are reserved for factory testing purposes. SIMPLIFIED SCHEMATIC INPUT R7 R8 2 R14 Q15 Q7 Q8 Q14 R15 Q13 Q18 Q9 Q12 Q16 Q11 C1 Q10 R6 R3 Q6 Q19 Q21 Q17 Q5 OUTPUT 6 R13 R4 R12 Q4 R5 Q1 Q2 Q3 Q20 R9 16.7k 50k TRIM 1.23V 5 R1 R10 R11 2k R2 GROUND 4 REV. C Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 www.analog.com Fax: 781/326-8703 (c) Analog Devices, Inc., 2002 REF01-SPECIFICATIONS ELECTRICAL SPECIFICATIONS (@ V IN = 15 V, TA = 25C, unless otherwise noted.) Parameter Symbol Conditions Output Voltage Output Adjustment Range Output Voltage Noise1 Line Regulation2 Load Regulation2 Turn-On Settling Time3 Quiescent Supply Current Load Current Sink Current4 Short Circuit Current VO VTRIM en p-p IL = 0 mA 9.97 RP = 10 k 3.0 0.1 Hz to 10 Hz VIN = 13 V to 33 V IL = 0 mA to 10 mA To 0.1% of Final Value No Load 10 -0.3 VO = 0 tON ISY IL IS ISC Min REF01A/E Typ Max 10.00 3.3 20 0.006 0.005 5 1.0 21 -0.5 30 10.03 Min REF01/H Typ Max 9.95 3.0 10.00 3.3 20 0.006 0.006 5 1.0 21 -0.5 30 30 0.010 0.008 1.4 10 -0.3 10.05 30 0.010 0.010 1.4 Unit V % V p-p %/V %/mA s mA mA mA mA (@ VIN = 15 V, -55C TA +125C for REF01A/E, and 0C TA 70C for REF01H and ELECTRICAL SPECIFICATIONS I = 0 mA, unless otherwise noted.) L Parameter Symbol Output Voltage Change VOT with Temperature 5, 6 Output Voltage TCVO Temperature Coefficient7 Change in VO Temperature Coefficient with Output Adjustment Line Regulation (VIN = 13 V to 33 V)2 Load Regulation (IL = 0 mA to 8 mA)2 Conditions Min 0C TA 70C -55C TA +125C 0.02 0.06 3.0 RP = 10 k 0.7 0C TA 70C -55C TA +125C 0C TA 70C -55C TA +125C 0.007 0.009 0.006 0.007 ELECTRICAL SPECIFICATIONS Min REF01/H Typ Max 0.06 0.15 8.5 0.07 0.18 10.0 0.17 0.45 25.0 0.7 0.012 0.015 0.010 0.012 0.007 0.009 0.007 0.009 Unit % % ppm/C ppm/% 0.012 0.015 0.012 0.015 %/V %/mA (@ VIN = 15 V, TA = 25C, unless otherwise noted.) Parameter Symbol Conditions Output Voltage Output Adjustment Range Output Voltage Noise1 Line Regulation2 Load Regulation2 Turn-On Settling Time3 Quiescent Supply Current Load Current Sink Current4 Short Circuit Current VO VTRIM en p-p IL = 0 mA 9.90 RP = 10 k 2.7 0.1 Hz to 10 Hz VIN = 13 V to 33 V IL = 0 mA to 8 mA To 0.1% of Final Value No Load 8 -0.3 VO = 0 tON ISY IL IS ISC REF01A/E Typ Max Min -2- REF01C Typ Max Unit 10.00 3.3 25 0.009 0.006 5 1.0 21 -0.5 30 V % V p-p %/V %/mA s mA mA mA mA 10.10 35 0.015 0.015 1.6 REV. C REF01 ELECTRICAL SPECIFICATIONS Parameter Symbol (@ VIN = 15 V, 0C TA 70C for REF01CJ, REF01CZ, and -40C TA +85C for REF01CP and REF01CS, unless otherwise noted.) Conditions Output Voltage Change VOT with Temperature5, 6 Output Voltage TCVO Temperature Coefficient7 Change in VO Temperature Coefficient with Output Adjustment Line Regulation2 Load Regulation2 REF01C Typ Max Min RP = 10 k VIN = 13 V to 30 V IL = 0 to 5 mA Unit 0.14 0.45 % 20 65 ppm/C 0.7 0.011 0.008 0.018 0.018 ppm/% %/V %/mA NOTES 1 Sample tested. 2 Line and load regulation specifications include the effect of self-heating. 3 Guaranteed by design. 4 During sink current test the device meets the output voltage specified. 5 VOT is defined as the absolute difference between the maximum output voltage and the minimum output voltage over the specified temperature range expressed as a percentage of 10 V: VOT = V MAX - V MIN 10 V x 100 6 VOT specification applies trimmed to +10,000 V or untrimmed. 7 TCVO is defined as Var divided by the temperature range, i.e. ( ) TCVO 0o to + 70o C = ( ( VOT 0o to + 70o C o 70 C ) TCVO -55o to + 125o C = ( ) and VOT -55o to + 125o C 180o C ) Specifications are subject to change without notice. 15V 2 VIN VO 6 OUTPUT REF01 TRIM 5 10k GND 4 The REF01 trim terminal can be used to adjust the output voltage over a 10 V 300 mV range. This feature allows the system designer to trim system errors by setting the reference to a voltage other than 10 V. Of course, the output can also be set to exactly 10.000 V or to 10.240 V for binary applications. Adjustment of the output does not significantly affect the temperature performance of the device. The temperature coefficient change is approximately 0.7 ppm/C for 100 mV of output adjustment. 2 6 Figure 1. Output Adjustment 2. INPUT VOLTAGE (VIN) 4. GROUND 5. TRIM 6. OUTPUT VOLTAGE (VOUT) +18V VIN 4 5 REF01 DIE SIZE 0.074 0.048 INCH, 3552 SQUARE MILS (1.88 1.22 mm, 2.29 SQUARE mm) Figure 3. Dice Characteristics (125C Tested Dice Available) GND -18V Figure 2. Burn-In Circuit REV. C -3- REF01 (@ VIN = 15 V, TA = 25C for REF01N and REF01G devices, TA = 125C for REF01NT and REF01GT devices, WAFER TEST LIMITS unless otherwise noted.)* Parameter Symbol Conditions Output Voltage VO IL = 0 Output Adjustment Range Line Regulation V TRIM RP = 10 k VIN = 13 V to 33 V REF01NT Limit REF01N Limit REF01GT Limit REF01G Limit Unit 10.05 9.95 10.03 9.97 10.10 9.90 10.05 9.95 V max V min 0.015 3.0 0.01 0.015 3.0 0.01 % min %/V max *Electrical tests are performed at wafer probe to the limits shown. Due to variations in assembly methods and normal yield loss, yield after packaging is not guaranteed for standard product dice. Consult factory to negotiate specifications based on dice lot qualification through sample lot assembly and testing. TYPICAL ELECTRICAL CHARACTERISTICS (@ V Parameter Symbol Load Regulation Output Voltage Noise Turn-On Settling Time en p-p tON Quiescent Current ISY Load Current Sink Current Short Circuit Current Output Voltage Temperature Coefficient IL IS ISC TCVO IN = 15 V, TA = 25C, unless otherwise noted.)* Conditions REF01NT Typical REF01N Typical REF01GT Typical REF01G Typical Unit IL = 0 mA to 10 mA IL = 0 mA to 8 mA, NT, GT @ 125C 0.007 0.005 0.009 0.006 %/mA 0.1 Hz to 10 Hz To 0.1% of Final Value NT, GT @ 125C No Load, NT, GT @ 125C 20 20 20 20 7.5 5.0 7.5 5.0 s 1.4 21 -0.5 1.0 21 -0.5 1.4 21 -0.5 1.0 21 -0.5 mA mA mA VO = 0 30 30 30 30 mA 10 10 10 10 ppm/C V p-p *For 25C specifications of REF01NT and REF01GT, see REF01N and REF01G, respectively. -4- REV. C REF01 ABSOLUTE MAXIMUM RATINGS* Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V Output Short Circuit Duration (to Ground or VIN) . . . . . . . . . . . . . . . . . . . . . . . . Indefinite Storage Temperature Range J, RC, and Z Packages . . . . . . . . . . . . . . . -65C to +150C P Package . . . . . . . . . . . . . . . . . . . . . . . . . -65C to +125C Operating Temperature Range REF01A . . . . . . . . . . . . . . . . . . . . . . . . . . -55C to +125C REF01CJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C REF01CP, REF01CS, REF01E, REF01H . . . . . . . . . . . . . . . . . . . . . . . . . -40C to +85C Junction Temperature (TJ) . . . . . . . . . . . . . -65C to +150C Lead Temperature (Soldering @ 60 sec) . . . . . . . . . . . . 300C Package Type JA* JC Unit TO-99 (J) 8-Pin Hermetic DIP (Z) 8-Pin Plastic DIP (P) 8-Pin SO (S) 170 162 110 160 24 26 50 44 C/W C/W C/W C/W *JA is specified for worst-case mounting conditions, i.e., JA is specified for device in socket for TO, CERDIP, and P-DIP packages; JA is specified for device soldered to printed circuit board for SO package. *Absolute maximum ratings apply to both DICE and packaged parts, unless otherwise noted. ORDERING GUIDE1 TA = 25C VOS Max (mV) 30 30 50 100 100 100 TO-99 REF01EJ Package Description CERDIPS PDIP 8-Lead 8-Lead REF01AZ2 REF01EZ REF01HZ SOIC 8-Lead REF01HP REF01HS3 REF01CP REF01CS3 REF01CJ Operating Temperature Range MIL XIND XIND COM XIND XIND NOTES 1 Burn-in is available on commercial and industrial temperature range parts in Cerdip, plastic DIP, and TO-can packages. 2 For devices processed in total compliance to MIL-STD-883, add 883 after part number. Consult factory for 883 data sheet. 3 For availability and burn-in information on SO package, contact your local sales office. CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the REF01 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. REV. C -5- WARNING! ESD SENSITIVE DEVICE 0.0031 0.0100 56 0.0310 46 0.1000 36 0.3100 1.0000 26 0 10 VIN = 15V TA = 25 C 100 1,000 100 3.1000 1k 10k 100k FREQUENCY - Hz 10 10 10.000 1M TPC 1. Line Regulation vs. Frequency 1k 10k 100k FREQUENCY - Hz 0.020 0.015 0.010 0.005 0 -10 LOAD REG - T/LOAD REG - 25 C 30 25 500mW MAXIMUM DISSIPATION 20 15 10 5 15 20 25 INPUT VOLTAGE - V 30 TPC 4. Maximum Load Current vs. Input Voltage 0 10 20 30 TIME - s 40 50 60 TPC 3. Output Change Due to Thermal Shock 1.4 1.3 1.2 1.1 1.0 0.9 0.8 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.7 0.6 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE - C 0.6 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE - C TPC 5. Normalized Load Regulation (IL = 10 mA) vs. Temperature TPC 6. Normalized Line Regulation vs. Temperature 1.3 30 VIN = 15V VIN = 15V QUIESCENT CURRENT - mA 25 20 15 10 5 0 -60 -40 -20 DEVICE IMMERSED IN 75C OIL BATH VIN = 15V TA = 25 C MAXIMUM LOAD CURRENT - mA VIN = 15V 0.025 T = 25C, T = 75C A A 1.4 SHORT CIRCUIT PROTECTION 0 10 0.030 1M TPC 2. Output Wideband Noise vs. Bandwidth (0.1 Hz to Frequency Indicated) 35 MAXIMUM LOAD CURRENT - mA 100 0.035 LINE REG - T/LINE REG - 25 C 16 VIN = 15V TA = 25 C OUTPUT NOISE - V p-p 66 10,000 LINE REGULATION - %/V LINE REGULATION - dB 76 PERCENT CHANGE IN OUTPUT VOLTAGE - % REF01-Typical Performance Characteristics 0 20 40 60 80 100 120 140 TEMPERATURE - C TPC 7. Maximum Load Current vs. Temperature 1.2 1.1 1.0 0.9 0.8 0.7 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE - C TPC 8. Quiescent Current vs. Temperature -6- REV. C REF01 +15V ANALOG INPUT 0 TO +10V -15V +15V 2 VIN 10k +15V LSB MSB 0.1F 5.0k VIN 0.1F 6 VO 4 lO 2 DAC08 REF01 3 13 14 -15V lO 1 SERIAL OUTPUT E POS. FULL SCALE -1LSB 1 1 1 1 1 1 1 1 +4.960 ZERO SCALE 1 0 0 0 0 0 0 0 0.000 NEG. FULL SCALE +1LSB 0 0 0 0 0 0 0 1 -4.960 NEG. FULL SCALE 0 0 0 0 0 0 0 0 -5.000 10 START 2 8 7 CMP01C 4 1 1k 7 AM2592 SUCCESSIVEAPPROXIMATION REGISTER CONNECT START TO CONVERSION COMPLETE FOR CONTINUOUS CONVERSIONS 9 2 CONVERSION COMPLETE Figure 4. D/A Converter Reference 4 -15V 14 13 12 11 6 5 4 3 B1 B2 B3 B4 B5 B6 B7 B8 3 2 5 6 7 8 9 10 1112 1 B1 B2 B3 B4 B5 B6 B7 B8 -15V 5.000k 3.9M lO DAC08 15 EO OP02 5.0k +15V 5 16 5k VLC CC V- V+ GND 4 5k 4 5.0k B1 B2 B3 B4 B5 B6 B7 B8 lO 5 CC REF01 GND TRIM +15V 2 VO +15V 0.01F 6 TTL CLOCK INPUT 2.25MHz Figure 7. A/D Converter Reference +15V 2 VIN +10V VO 6 1.1mA REF01 2 VIN 9V 10k 0.1% 5 TRIM GND VO + 6 0.1F REF01 TRIM GND 4 +15V 0.1F 9V 10k 0.1% -10V 5 100k 10.000V OP02 5k 4 - -15V Figure 8. 10 V Reference Figure 5. Precision Calibration Standard VOLTAGE COMPLIANCE: -25V TO +3V 15V VOLTAGE COMPLIANCE: -3V TO +25V IOUT 2 2 VIN VIN VO 6 VO REF01 REF01 TRIM 6 5 R IOUT = 10V + 1mA R TRIM GND GND 4 4 5 R IOUT = 10V + 1mA R -15V IOUT Figure 6. Current Source REV. C Figure 9. Current Sink -7- REF01 REFERENCE STACK WITH EXCELLENT LINE REGULATION PRECISION CURRENT SOURCE A current source with 25 V output compliance and excellent output impedance can be obtained using this circuit. REF01 keeps the line voltage and power dissipation constant in the device; the only important error consideration at room temperature is the negative supply rejection of the op amp. The typical 3 V/ V PSRR of the OP02E will create an 8 ppm change (3 V/V 25 V/10 V) in output current over a 25 V range. For example, a 10 mA current source can be built (R = 1 k) with 300 M output impedance. RO = Three REF01s can be stacked to yield 10.000 V, 20.000 V, and 30.000 V outputs. An additional advantage is near-perfect line regulation of the 10.0 V and 20.0 V output. A 32 V to 60 V input change produces an output change that is less than the noise voltage of the devices. A load bypass resistor (RB) provides a path for the supply current (ISY) of the 20.000 V regulator. In general, any number of REF01s can be stacked this way. For example, 10 devices will yield outputs of 10, 20, 30 . . . 100 V. The line voltage can change from 105 V to 130 V. However, care must be taken to ensure that the total load currents do not exceed the maximum usable current (typically 21 mA). 25 V 8 x 10-6 x 10 mA +50V 6 VO 32V TO 60V 2 2 VIN VIN REF01 TRIMMED OUTPUTS REF01 TRIM GND GND 4 4 2 VIN VO 30.000V VO 6 5 10k 2 6 VIN REF01 C R (TRIM FOR CALIBRATION) 6 20.000V REF01 GND 4 VO TRIM GND 2 R VIN C VO 6 5 4 10k 10.000V REF01 7 6 OP02E 2 TRIM VO = 0 TO +25V 3 -5V 10k RB 6.8k 4 4 RC = 10-5 SEC 5 GND IO = +10V R Figure 11. Reference Stack Figure 10. Precision Current Source SUPPLY BYPASSING For best results, it is recommended that the power supply pin is bypassed with a 0.1 F disc ceramic capacitor. -8- REV. C REF01 OUTLINE DIMENSIONS 8-Lead Ceramic Dip-Glass Hermetic Seal [CERDIP] (Q-8) 8-Lead Metal Can [TO-99] (H-08B) Dimensions shown in inches and (millimeters) Dimensions shown in inches and (millimeters) 0.055 (1.40) MAX 0.005 (0.13) MIN 8 REFERENCE PLANE 0.1850 (4.70) 0.1650 (4.19) 5 0.310 (7.87) 0.220 (5.59) PIN 1 1 0.2500 (6.35) MIN 0.1000 (2.54) BSC 4 0.320 (8.13) 0.290 (7.37) 0.060 (1.52) 0.015 (0.38) 0.3700 (9.40) 0.3350 (8.51) 0.3350 (8.51) 0.3050 (7.75) 5 0.405 (10.29) MAX 0.200 (5.08) MAX 0.150 (3.81) MIN 0.200 (5.08) 0.125 (3.18) 0.1600 (4.06) 0.1400 (3.56) 0.0500 (1.27) MAX 0.100 (2.54) BSC SEATING 0.070 (1.78) PLANE 0.030 (0.76) 0.023 (0.58) 0.014 (0.36) 0.5000 (12.70) MIN 0.2000 (5.08) BSC 15 0 3 7 2 0.1000 (2.54) BSC 0.0190 (0.48) 0.0160 (0.41) 0.0400 (1.02) MAX 0.0400 (1.02) 0.0100 (0.25) 0.015 (0.38) 0.008 (0.20) 6 4 0.0210 (0.53) 0.0160 (0.41) 0.0450 (1.14) 0.0270 (0.69) 8 1 0.0340 (0.86) 0.0280 (0.71) 45 BSC BASE & SEATING PLANE CONTROLLING DIMENSIONS ARE IN INCH; MILLIMETERS DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN COMPLIANT TO JEDEC STANDARDS MO-002AK CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN 8-Lead Standard Small Outline Package [SOIC] Narrow Body (R-8) 8-Lead Plastic Dual-in-Line Package [PDIP] (N-8) Dimensions shown in inches and (millimeters) Dimensions shown in millimeters and (inches) 0.375 (9.53) 0.365 (9.27) 0.355 (9.02) 5.00 (0.1968) 4.80 (0.1890) 4.00 (0.1574) 3.80 (0.1497) 8 5 1 4 1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0040) COPLANARITY SEATING 0.10 PLANE 6.20 (0.2440) 5.80 (0.2284) 1.75 (0.0688) 1.35 (0.0532) 0.51 (0.0201) 0.33 (0.0130) 8 5 1 4 0.295 (7.49) 0.285 (7.24) 0.275 (6.98) 0.325 (8.26) 0.310 (7.87) 0.300 (7.62) 0.100 (2.54) BSC 0.50 (0.0196) 45 0.25 (0.0099) 0.180 (4.57) MAX 8 0.25 (0.0098) 0 1.27 (0.0500) 0.41 (0.0160) 0.19 (0.0075) 0.150 (3.81) 0.130 (3.30) 0.110 (2.79) 0.022 (0.56) 0.018 (0.46) 0.014 (0.36) COMPLIANT TO JEDEC STANDARDS MS-012AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN 0.015 (0.38) MIN SEATING PLANE 0.060 (1.52) 0.050 (1.27) 0.045 (1.14) 0.150 (3.81) 0.135 (3.43) 0.120 (3.05) 0.015 (0.38) 0.010 (0.25) 0.008 (0.20) COMPLIANT TO JEDEC STANDARDS MO-095AA CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS (IN PARENTHESES) REV. C -9- REF01 Revision History Location Page 10/02--Data Sheet changed from REV. B to REV. C. Edits to FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Delete RC-SUFFIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Edits to ABSOLUTE MAXIMUM RATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Edits to ORDERING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Edits to Package Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Delete CP-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Updated OUTLINE DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 -10- REV. C -11- -12- PRINTED IN U.S.A. C00373-0-10/02(C)