51
2
345
JST
B
This, the thinnest, 2.5mm (.098") pitch
connector, is 8.1mm (.319") in height after
mounting and 3.8mm (.150") in width. It is
designed to meet the demand for the high-
density connection of internal wires to
printed circuit boards. It is compact, highly
reliable and low in cost.
Features––––––––––––––––––––––––
• Compact and slim
This connector is designed to be compact and unusually thin.
It measures only 8.1mm (.319") high after mounting and is just
3.8mm (.150") wide.
• Highly reliable contact
The contact has long dimples near the center that ensure
continuity of low voltage and low current circuits at all times,
even under conditions of vibration and abusive prying.
• Polarizing guides
The header and housing have guides to prevent improper
mating.
• Whisker prevention
The contact material is treated with a reflow process, and the
square post is copper-undercoated and tin/lead-plated for
whisker prevention.
• Easy and effective crimping
Although the contact is compact, it has a long wire strip length,
2.6±0.4mm (.102"±.016"). This long length is very useful for
automatic crimping and when crimping shielded wires.
Specifications –––––––––––––––––––
Current rating: 3A AC, DC (AWG#22)
Voltage rating: 250V AC, DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
Contact resistance: Initial value/10m max.
After environmental testing/20m Ω max.
Insulation resistance: 1,000M min.
Withstanding voltage: 800V AC/minute
Applicable wire: AWG #32 to #22
Applicable PC board thickness: 0.8 to 1.6mm(.031" to .063")
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
2R75089
EH CONNECTOR
Disconnectable Crimp style connectors
2.5mm
(.098") pitch
Crimp
Radial Tape
52
EH CONNECTOR
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1.1(.039)
5.7(.224)
2.85(.112) 2.05(.081)
2.0(.079)
1.6(.063)
Model No. Applicable wire
mm2AWG #
Insulation O.D. mm(in.)
Q'ty /
reel
SEH-001T-P0.6
SEH-003T-P0.6L
0.05 to 0.3
0.032 to 0.08
30 to 22
32 to 28
1.0 to 1.9(.039 to .075)
0.5 to 1.1(.020 to .043)
10,000
Material and Finish
Phosphor bronze, tin-plated
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
0.7
6.5(.256)
3.8(.150)
0.6
(.024)
(.028)
A
B
JST
21367
2.25
(.089) 2.5(.098)
Circuit No.1
Model No. Q'ty /
bag
Cir-
cuits Dimensions mm(in.)
AB
Material
2
3
4
5
6
7
8
9
10
11
12
13
14
15
EHR- 2
EHR- 3
EHR- 4
EHR- 5
EHR- 6
EHR- 7
EHR- 8
EHR- 9
EHR-10
EHR-11
EHR-12
EHR-13
EHR-14
EHR-15
2.5( .098)
5.0( .197)
7.5( .295)
10.0( .394)
12.5( .492)
15.0( .591)
17.5( .689)
20.0( .787)
22.5( .866)
25.0( .984)
27.5(1.083)
30.0(1.181)
32.5(1.280)
35.0(1.378)
7.0( .276)
9.5( .374)
12.0( .472)
14.5( .571)
17.0( .669)
19.5( .768)
22.0( .866)
24.5( .965)
27.0(1.063)
29.5(1.161)
32.0(1.260)
34.5(1.358)
37.0(1.457)
39.5(1.555)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Nylon 66, UL94V-0, natural (white)
Note: 1. Contact JST for gold-plated contacts.
2. SEH-003T-P0.6L is not TU
¨V approved.
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. EHR-2-oo-
(blank)…natural (white)
K…black R…red TR…tomato red E…blue Y…yellow
L…lemon yellow M…green O…orange N…brown PL…purple
PK…pink H…gray LE…light blue FY…vivid yellow
53
EH CONNECTOR
Shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––––––––––
A
3.2(.126) 6.0(.236)
B 3.8(.150)
0.64
(.025)
3.3(.130)
2.5(.098) 1.6(.063)
Circuit No.1
3.2(.126) 5.1(.201)
3.8(.150)
B
A
6.0(.236)
3.3(.130)
0.64
(.025) 1.6(.063)
2.5
(.098)
2.5
(.098)
Circuit No.1
A
B
5.2(.205)
6.0(.236)
6.7(.264)
4.2(.165)
4.0(.157)
3.2
(.126)
2.2
(.087)
2.5
(.098)
2.5
(.098) 0.64
(.025)
Circuit No.1
Model No. Q'ty / box
Cir-
cuits
Dimensions mm.(in)
Top entry
type Side entry
type AB
Top entry
type
Material and Finish
2
3
4
5
6
7
8
9
10
11
12
13
14
15
B 2B-EH-A
B 3B-EH-A
B 4B-EH-A
B 5B-EH-A
B 6B-EH-A
B 7B-EH-A
B 8B-EH-A
B 9B-EH-A
B10B-EH-A
B11B-EH-A
B12B-EH-A
B13B-EH-A
B14B-EH-A
B15B-EH-A
2.5( .098)
5.0( .197)
7.5( .295)
10.0( .394)
12.5( .492)
15.0( .591)
17.5( .689)
20.0( .787)
22.5( .866)
25.0( .984)
27.5(1.083)
30.0(1.181)
32.5(1.280)
35.0(1.378)
1,000
1,000
1,000
1,000
1,000
1,000
500
500
500
500
500
250
250
250
S 2B-EH
S 3B-EH
S 4B-EH
S 5B-EH
S 6B-EH
S 7B-EH
S 8B-EH
S 9B-EH
S10B-EH
S11B-EH
S12B-EH
S13B-EH
S14B-EH
S15B-EH
7.5( .295)
10.0( .394)
12.5( .492)
15.0( .591)
17.5( .689)
20.0( .787)
22.5( .886)
25.0( .984)
27.5(1.083)
30.0(1.181)
32.5(1.280)
35.0(1.378)
37.5(1.476)
40.0(1.575)
Post: Brass, copper-undercoated, tin/lead plated
Wafer: Nylon 66, UL94V-0, natural (white)
Side entry
type
1,000
1,000
1,000
1,000
500
500
500
500
500
250
250
250
250
250
The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors.
Top entry type
Side entry type
(2 circuits)
(3 to 15 circuits)
Note:
1. Also available and identified as model BxxB-EH is a top entry type having a
post extension length of 4.0mm(.157")
2. Top entry type headers are not TU
¨V approved.
PC board layout (viewed from soldering side) and Assembly layout –––––––––––––––––––
7.5(.295) 0.6(.024)
(.150)
3.8
2.5±0.05
(.098±.002) 2.5
(.098)min.
0.9+0.1
(.035 +.004)dia.
2.2
(.087)min.
0
0
10.3(.406)
8.2(.323)
(.165)
4.2
2.5±0.05
(.098±.002) 1.9
(.074)min.
0.9+0.1
(.035 +.004)dia.
6.7
(.264)min.
0
0
Note:
1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers.
2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material such as FR-4 are used, the hole dimensions
should be larger. The dimensions above should serve as a guideline. Contact JST for details.
Top entry type Side entry type
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
<Top entry type>
ex. B2B-EH-A-oo-
(blank)…natural (white)
K…black R…red E…blue Y…yellow M…green
<Side entry type>
ex. S2B-EH-oo-
(blank)…natural (white)
K…black R…red TR…tomato red E…blue Y…yellow
L…lemon yellow M…green O…orange N…brown P…purple
PK…pink H…gray LE…light blue FY…vivid yellow
54
EH CONNECTOR
7.5(.295) 2.2(.087)
5.4(.213)
2.5(.098)
6.5
(.255)
1.5(.059)
[1.0(.039)]
4.4
(.173)
0.64(.025) dia.
A
B
2.8(.110)
2.5(.098)
2.5(.098)
0.64(.025) dia.
6.5(.256)
1.5(.059)
[1.0(.039)]
2.2(.087)
5.6(.220)
4.4
(.173)
0.64(.025) dia.
TS type
(2 circuits)
(3 to 8 circuits)
A
B
2.8(.110)
2.5(.098)
2.5(.098) 0.64(.025)
6.5(.256)
2.2(.087)
5.6(.220)
4.4
(.173)
[0.7(.028) dia.]
[0.7(.028) dia.]
TV4 type
Shrouded header on radial-tape –––––––––––––––––––––––––––––––––––––––––––––
<Taping specifications conform to EIAJ-RC-1008B and JIS C0805.>
•The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors .
Shrouded headers on radial-tape are not TU
¨V approved.
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2B-EH-TS-oo-
(blank)…natural (white)
K…black R…red E…blue Y…yellow M…green N…brown
5555
Package type
Distance between folds
Box size
Distance between the end of the
tape and the first connector´s
center line (either end)
Flat pack (zigzag folded)
24 indexing holes per fold (304.8mm/12")
(316x45x330mm)12.4"(W)x1.8"(D) x13.0"(H)
19.05mm(.750")
Packaging specifications–––––––––––––––––––––––––––––––––––––––––––––––––––
8.6(.339)
6.5(.256)
(.173)
4.4
2.5±0.05
(.098±.002) 2.5
(.098)min.
0.9+0.1
(.035+.004)dia.
2.2
(.087)min.
0
0
TERMINALS & CONNECTORS
R
D
H
W
Lead tapeTail tape
Distance between the end of the tape and the first connector's center
line (either end)
EH CONNECTOR
PC board layout (viewed from soldering side) and Assembly layout –––––––––––––––––––
Note:
1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers.
2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material such as FR-4 are used, the hole dimensions
should be larger. The dimensions above should serve as a guideline. Contact JST for details.
Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––
12.7(.500)
20.0(.787)
9.0(.354)
18.0(.709)
2 and 3 circuits: 12.7(.500)
4 to 8 circuits: 25.4(1.000)
6.0
(.236)
4.0
(.157)dia.
2circuits: 5.1(.201)
3 to 8 circuits: 3.85(.152) 2circuits: 2.5(.098)
3 to 8 circuits: 5.0(.197)
Note: Conforms to JIS C0825.
56
EH CONNECTOR
Contact Crimp applicator MKS-L(-10) Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC
with safety cover without safety cover with safety cover without safety cover with safety cover
Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––
SEH-001T-P0.6 APLMK SEH001-06 APLNC SEH001-06 APLMKLS SEH001-06 APLLSNC SEH001-06 APLSC SEH001-06
SEH-003T-P0.6L APLMK SEH003-06 APLNC SEH003-06 APLSC SEH003-06