TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 NPN SILICON DUAL TRANSISTOR Qualified per MIL-PRF-19500 /495 DEVICES LEVELS 2N5793 2N5794 2N5794U JAN JANTX JANTV JANS 2N5794UC ABSOLUTE MAXIMUM RATINGS (TC = +25C unless otherwise noted) Parameters / Test Conditions Symbol Value Unit Collector-Emitter Voltage VCEO 40 Vdc Collector-Base Voltage VCBO 75 Vdc Emitter-Base Voltage VEBO 6.0 Vdc IC 600 mAdc Collector Current Total Power Dissipation @ TA = +25C Operating & Storage Junction Temperature Range PT Top, Tstg One Section 1 Total Device 2 0.5 0.6 -65 to +200 W C TO-78 NOTES: 1. Derate linearly 2.86 mW/C for TA > +25C 2. Derate linearly 3.43 mW/C for TA > +25C ELECTRICAL CHARACTERISTICS (TA = +25C, unless otherwise noted) Parameters / Test Conditions OFF CHARACTERTICS Collector-Emitter Breakdown Current IC = 10mAdc Symbol Min. V(BR)CEO 40 Max. Unit Vdc 6 PIN SURFACE MOUNT Collector-Base Cutoff Current VCB = 75Vdc VCB = 50Vdc Emitter-Base Cutoff Current VEB = 6.0Vdc VEB = 4.0Vdc T4-LDS-0213 Rev. 1 (111181) ICBO 10 10 Adc Adc IEBO 10 10 Adc Adc Page 1 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 ELECTRICAL CHARACTERISTICS (con't) Parameters / Test Conditions ON CHARACTERTICS Forward-Current Transfer Ratio IC = 100Adc, VCE = 10Vdc IC = 1.0mAdc, VCE = 10Vdc IC = 10mAdc, VCE = 10Vdc IC = 150mAdc, VCE = 10Vdc IC = 300mAdc, VCE = 10Vdc IC = 150mAdc, VCE = 1.0Vdc IC = 100Adc, VCE = 10Vdc IC = 1.0mAdc, VCE = 10Vdc IC = 10mAdc, VCE = 10Vdc IC = 150mAdc, VCE = 10Vdc IC = 300mAdc, VCE = 10Vdc IC = 150mAdc, VCE = 1.0Vdc 2N5793 Symbol Min. hFE 20 25 35 40 25 20 2N5794, 2N5794U, 2N5794UC hFE Collector-Emitter Saturation Voltage IC = 150mAdc, IB = 15mAdc IC = 300mAdc, IB = 30mAdc VCE(sat) Base-Emitter Saturation Voltage IC = 150mAdc, IB = 15mAdc IC = 300mAdc, IB = 30mAdc VBE(sat) 35 50 75 100 40 50 Max. Unit 120 300 0.3 0.9 Vdc 0.6 1.2 1.8 Vdc Symbol Min. Max. Unit Forward Current Transfer Ratio, Magnitude IC = 20mAdc, VCE = 20Vdc, f = 100MHz |hfe| 2.0 10 Output Capacitance VCB = 10Vdc, IE = 0, 100kHz f 1.0MHz Cobo 8.0 pF Input Capacitance VEB = 0.5Vdc, IC = 0, 100kHz f 1.0MHz Cibo 33 pF Max. Unit DYNAMIC CHARACTERISTICS Parameters / Test Conditions SWITCHING CHARACTERISTICS Parameters / Test Conditions Symbol Min. Turn-On Time VCC = 30Vdc, IC = 150mAdc, IB1 = 15mAdc, VBE(off) = 0.5Vdc ton 45 s Turn-Off Time VCC = 30Vdc, IC = 150mAdc, IB1 = IB2 =15mAdc toff 310 s T4-LDS-0213 Rev. 1 (111181) Page 2 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS Symbol CD CH H L L LC LC LC T T Inches Min Max .305 .335 .150 .185 .335 .370 .016 .021 .500 .200 BSC .100 BSC .100 BSC .029 .045 .028 .034 45 TP Millimeters Min Max 7.75 8.51 3.81 4.70 8.51 9.40 0.41 0.53 12.7 5.08 BSC 2.54 BSC 2.54 BSC 0.74 1.14 0.71 0.86 45 TP Note 4 3 6 NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Measured from maximum diameter of the product. 4. Leads having maximum diameter .019 inch (.483 mm) measured in gaging plan .054 inch (1.37 mm) + .001 inch (.025 mm) - .000 inch (.000 mm) below the seating plane of the product shall be within .007 inch (.178 mm) of their true position relative to a maximum width tab. 5. The product may be measured by direct methods or by gauge. 6. Tab centerline. 7. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. FIGURE 1. Physical dimensions (2N5793 and 2N5797) (similar to TO-99) T4-LDS-0213 Rev. 1 (111181) Page 3 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Symbol BL BL2 BW BW2 CH L3 LH Dimensions Inches Millimeters Min Max Min Max .240 .250 6.10 6.35 .250 6.35 .165 .175 4.19 4.45 .175 4.45 .058 .100 1.47 2.54 .003 .007 0.08 0.18 .026 .039 0.66 0.99 Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Symbol LL1 LL2 LS1 LS2 LW LW2 Min .060 .082 .095 .045 .022 .006 Inches Dimensions Max .070 .098 .105 .055 .028 .022 Millimeters Min Max 1.52 1.78 2.08 2.49 2.41 2.67 1.14 1.40 0.56 0.71 0.15 0.56 NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Dimension "CH" controls the overall package thickness. 4. The corner shape (square, notch, radius, etc.) may vary at the manufacturer's option from that shown on the drawing. 5. Dimensions "LW2" minimum and "L3" minimum and the appropriate castellation length define an unobstructed threedimensional space traversing all of the ceramic layers in which a castellation was designed. (Castellations are required on bottom two layers, optional on top ceramic layer.) Dimension "LW2" maximum and "L3" maximum define the maximum width and depth of the castellation at any point on its surface. Measurement of these dimensions may be made prior to solder dipping. 6. Lead 4 = collector. 7. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. FIGURE 2. Physical dimensions, 2N5794U. T4-LDS-0213 Rev. 1 (111181) Page 4 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Symbol BL BL2 BW BW2 CH L3 LH Dimensions Inches Millimeters Min Max Min Max .240 .250 6.10 6.35 .250 6.35 .165 .175 4.19 4.45 .175 4.45 .058 .115 1.47 2.92 .003 .007 0.08 0.18 .026 .039 0.66 0.99 Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Symbol LL1 LL2 LS1 LS2 LW LW2 Dimensions Inches Millimeters Min Max Min Max .060 .070 1.52 1.78 .082 .098 2.08 2.49 .095 .105 2.41 2.67 .045 .055 1.14 1.40 .022 .028 0.56 0.71 .006 .022 0.15 0.56 NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Dimension "CH" controls the overall package thickness and is ceramic. 4. The corner shape (square, notch, radius, etc.) may vary at the manufacturer's option from that shown on the drawing. 5. Dimensions "LW2" minimum and "L3" minimum and the appropriate castellation length define an unobstructed three-dimensional space traversing all of the ceramic layers in which a castellation was designed. (Castellations are required on bottom two layers, optional on top ceramic layer.) Dimension "LW2" maximum and "L3" maximum define the maximum width and depth of the castellation at any point on its surface. Measurement of these dimensions may be made prior to solder dipping. 6. Lead 4 = Collector. 7. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. FIGURE 3. Physical dimensions, 2N5794UC. T4-LDS-0213 Rev. 1 (111181) Page 5 of 5