|||||||||||||||
AP3S
• Performance comparable to fixed frequency oscillator
• Lowest peak-to-peak jitter
• Low supply current
• Short lead time
• Suitable for mass production
• Alternative to long lead-time XO's
Pb
RoHS
Compliant
3.2 x 2.5 x 1.2mm
SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
FEATURES:
ELECTRICAL SPECIFICATIONS:
For Small
Quantities,
Delivery Time
is 1-5 days
OPTIONS & PART IDENTIFICATION:
(Left blank if standard)
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 |fax 949-546-8001 | www.abracon.com
Revised: 08.06.09
Visit www.abracon.com for Terms & Conditions of Sale
* Inclusive of calibration @25°C,
operating temperature range, input
voltage variation, load variation, aging,
shock, and vibration.
** Jitter performance depends on
programing parameter and output
frequency. Please contact ABRACON
for additional info.
Table 1: Input Current
3.3V 2.5V 1.8V
10 8 6
15 10 8
20 15 12
22 15 -
25 - -
Table 2: Rise and Fall Time
3.3V 2.5V 1.8V
6 8 10
5 5 6
1MHz ≤ F< 10MHz
10MHz ≤ F
166MHz ≤ F < 200MHz
Frequency Rise / Fall Time (ns)
MHz
1MHz ≤ F< 30MHz
30MHz ≤ F< 75MHz
75MHz ≤ F< 133MHz
133MHz ≤ F < 166MHz
MHz
Frequency Input current (mA)
Blank* 3.3 V I 0°C to +50°C J (***) ±20ppm **Blank
1 2.5 V E '-20°C to +70°C R±25ppm **B PDB T Tape and Reel
2 1.8 V F -30°C to +70°C K±30ppm
Ask for Tube Package
*3.3V : Standard N -30°C to +85°C
L-40°C to +85°C
C±50ppm (***) Available for I, or E temp options only
Contact ABRACON for EJ or LR options (Availability is limited)
PackagingPIN 1(Option)Operating Temp. Freq. Stability
AP3S -Frequency*- ---
Supply Voltage
** OE: Tri-state the output buffer
** PDB: Tri-state the output buffer & shut-off the oscillator,
<10μA when PDB enabled
OE Blank Bulk
Characteristics Unit Minimum Typical Maximum
Frequency Range (3.3V) MHz 1 -- 200
(2.5V) MHz 1 -- 166
(1.8V) MHz 1 -- 133
Operating Temp. Range (See Options) °C -10 -- 60
Freq. stability over operating temp.* (See Options)
ppm -100 -- 100
V 2.97 3.3 3.63
V 2.25 2.5 2.75
Input Voltage (Operating Vdd)
V 1.62 1.8 1.98
Input Current mA See Table 1
Output Type CMOS
Output Load pF -- 15 --
Output "0" level (3.3V) V -- -- 0.33
(2.5V) V -- -- 0.25
(1.8V) V -- -- 0.18
Output "1" level (3.3V) V 2.97 -- --
(2.5V) V 2.25 -- --
(1.8V) V 1.62 -- --
Symmetry % 45 50 55
Standby Current uA -- -- 10
Start-up Time mSec • • • • 1 10
Rise Time (10%->90% Vdd) nSec See Table 2
Fall Time (90%->10% Vdd) nSec See Table 2
• • pin 1 : High or Open , pin 3 : Enable
Tri-state Function
(Input to pin 1) • • pin 1 : Low , pin 3 : Disable
Jitter peak-to-peak** psec -- 40 to 200 --
* Frequency in MHz
|||||||||||||||
AP3S
Pb
RoHS
Compliant
3.2 x 2.5 x 1.2mm
SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
Dimensions: inch (mm)
OUTLINE DRAWING: TEST CIRCUIT:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 |fax 949-546-8001 | www.abracon.com
Revised: 08.06.09
Visit www.abracon.com for Terms & Conditions of Sale
PIN
# 1
# 2
# 3
# 4
CONNECTION
STAND-BY / OE
GND/CASE
OUTPUT
VDD
Note: It is recommended
to use an approximately
0.01uF bypass capacitor
between PIN 2 and 4.
Dimension : Inches (mm)
|||||||||||||||
AP3S
Pb
RoHS
Compliant
3.2 x 2.5 x 1.2mm
SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
REFLOW PROFILE:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 |fax 949-546-8001 | www.abracon.com
Revised: 08.06.09
Visit www.abracon.com for Terms & Conditions of Sale
NOTE: Abracon manufactured products are intended for general commercial and industrial use. For applications requiring
high reliability and/or presenting extreme operating environment, written consent & authorization from Abracon is required.
Dimensions: mm
TAPE & REEL: Tape and reel 1,000 pcs/reel
