Frenchtown, NJ USA
TEL: (908) 996-6841
FAX: (908) 996-3891
http://www.arieselec.com • info@arieselec.com
abc
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
FEATURES:
• Allows for breadboarding or substitution of microgate SOT-
23A-6 and SOT-25 IC and transistor packages into .100 [2.54]
pitch proto boards or PC boards.
• Solder masked top-side pads allow user to hand solder
devices directly to topside of adapter with fewer problems of
solder bridging.
• Longer male bottom pins are available at special request for
easy use of probe clips.
• Large topside pads allow for soldering test pins, jumpers, etc.
to top of adapter.
SPECIFICATIONS:
• Board material is .062 [1.58] thick FR-4 manufactured to IPC-
600E, class 2 standards, with 1 ounce. Copper traces, both
sides.
• Pads are HASL.
• Pins are Brass Alloy 360 1/2 hard per UNS C36000 ASTM-
B16-00.
• Pin plating is 200μ[5.08μm] min.
Tin/Lead 93/7 ASTM B 545 over 100μ [2.54μm] Nickel per
SAE-AMS-QQ-N-290.
• Operating Temperature=221°F [105°C].
• All C.A.C’s are manufactured and inspected using IPC -610B
class 2 guidelines.
MOUNTING CONSIDERATIONS:
• Suggested PCB hole size=.028 ±.003 [.71 ± .08] dia.
ALL DIMENSIONS: INCHES [MILLIMETERS]
All tolerances ± .005 [.13]
unless otherwise specified
Part No. 1110748 - Surface Mount to
DIP Adapter for SOT-25, SOT-23A-6
Consult factory for mounting
of consigned chips.
SPECIFY PART NO. 1110748 WHEN
ORDERING
ORDERING INFORMATION
Note: Aries specializes in custom design and production. In addition to
the standard products shown on this page, special materials, platings,
sizes, and configurations can be furnished, depending on quantities.
Aries reserves the right to change product specifications without notice.
18043
Rev. C
