24926 Highway 108 Sierra Village, CA 95346 Phone: (800) 545-1022 Fax: (209) 586-1026 E-Mail: sales @olsontech.com LaserLite Model OTOT-1000E-X Economy 1GHz 1310nm Optical Transmitter Rugged and compact CATV fiber optic transmitter. Available enhanced RF bandwidth of 48-1,000MHz supports most analog and QAM digital broadcast transport applications. Wide range of 2mW to 31mW DFB laser options for Tx launch powers from 3dBm to 15dBm. The perfect blend of economy and performance. External RF and optical test points facilitate optical circuit set-up and maintenance. Field-configurable front or rear panel SC/APC optical output connector. (FC/APC optional) Self-contained, low profile, rugged flange mount package. Optional 19" EIA rackmount kit for up to three (3) transmitters on a 1RU chassis panel. Low power consumption, runs cool, integrated 90-240VAC power supply. (24VDC optional) Rev B The Olson Technology, Inc. LaserLite Model OTOT-1000E-X Economy 1GHz 1310nm CATV Broadcast Transmitter is a high quality, full-featured, cost-effective standalone or 1RU 19" EIA optical transmitter. Designed for optical transport of analog and QAM digital broadcast signals, the transmitter is ideal for CATV Hybrid Fiber Coax (HFC) applications, as well as direct transmission of CATV RF signals in Industrial, corporate, government, educational, and other applications.. The Model OTOT-1000E transmitter uses state-of-the-art RF and optical component technology. A comprehensive lineup of DFB laser offerings provides superior performance over a wide range of optical budgets (up to 16dB of loss), allowing unrepeatered spans of over 45km (28 miles) when used in conjunction with high performance, high sensitivity node receivers such as the Olson Technology Model OTPN-2000 or OTMN-II. Less demanding applications can operate to 25dB of loss or 70km (43 miles) distance. The rugged, self-contained OTOT-1000E provides exterior RF input and optical output connections, plus front panel RF and laser test points. The field-configurable SC/APC (or optional FC/APC) optical output connector can be mounted on the front or rear panel of the unit. The OTOT-1000E is cooled with forced air via an external high MTBF fan designed to be fieldreplaceable without interrupting operation. The stand-alone unit can be rack-mounted using the Model OTLL-RMKIT-1 to mount up to three OTOT-1000E's in a 1RU (1.75") 19" space. The Model OTOT-1000E is the perfect companion to Olson Technology's OTPN-2000 and OTMN-II optical nodes. It is also designed to operate with optical receivers from most leading manufacturers. The companion OTOR-300 return receiver works with all RF return path optical transmitters in the 5MHz to 300MHz frequency range. All Specifications Subject to Change Without Notice June 2009 System Specifications RF and System Characteristics Min 48 -1.0 Frequency Range Frequency Response Input Impedance Input Return Loss Input Level (+3 to +6dBm) Input Level (+8 to +15dBm) CSO CTB Input Adjustment Range (1) RF Test Point (2) Electrical and Environmental Characteristics Typ 75 16 +18 +19 60 63 4 +10 Max 1,000 +1.0 Units MHz dB Ohms dB dBmV/ch dBmV/ch dBc dBc dB dBmV/Ch Typ NOTES: 1) To +22dBmV/carrier. 2) Set for 77 analog channels, full QAM digital loading. Min Dimensions (W x H x D) Max Units +240 VAC 60 Hz 10 W -10 +55 C 5 95 % Forced Air Fan Field-replaceable IEC 320 w/ 5x2.0 0.5A Slo-Blo Fuse Power Connector Physical Characteristics Weight Min +90 50 Power Supply Voltage Power Supply Frequency Power Consumption Operating Temp. Range Humidity (RH Non Con.) Cooling Typ Max Units 1.5 lbs. 0.68 kg 5.5 x 1.6 x 7.5 in. 140 x 41 x 191 mm Transmitter Interfaces RF Input Connector Optical Output Connector F-type. SC/APC std, FC/APC opt, front or rear panel. 0.1V/mW 1V/50mA Optical Power Test Jack Laser Current Test Jack Typical CNR Performance Rx Power (dBm) Notes 1) For example, a +8dBm transmitter thru 10dB of passive optical loss with Low Ch. Load would be looked up as "-2dBm" in the first column in this case yielding 53.0dB typical CNR. 2) Loading refers to total modulated analog channels loading. Power levels are per channel peak envelope power. 3) All CNR is measured at +18dBmV/carrier. Low Ch. Load (77 NTSC) CNR (dB) High Ch. Load (110 NTSC) CNR (dB) (Note 1) All Passive Passive +3.5dB Fiber Passive +7dB Fiber All Passive Passive +3.5dB Fiber +2dBm 56.0 55.1 54.3 55.0 54.1 53.3 +1dBm 55.5 54.6 53.8 54.5 53.6 52.8 0dBm 55.0 54.1 53.3 54.0 53.1 52.3 -1dBm 54.0 53.1 52.3 53.0 52.1 51.3 Passive +7dB Fiber -2dBm 53.0 52.1 51.3 52.0 51.1 50.3 -3dBm 52.0 51.1 50.3 51.0 50.1 49.3 -4dBm 51.0 50.1 49.3 50.0 49.1 48.3 Ordering Information OTOT-1000E-3-XX OTOT-1000E-6-XX OTOT-1000E-8-XX OTOT-1000E-9-XX OTOT-1000E-10-XX OTOT-1000E-12-XX OTOT-1000E-13-XX OTOT-1000E-14-XX OTOT-1000E-15-XX Optical Transmitter, 1310nm, +3dBm Optical Output Optical Transmitter, 1310nm, +6dBm Optical Output Optical Transmitter, 1310nm, +8dBm Optical Output Optical Transmitter, 1310nm, +9dBm Optical Output Optical Transmitter, 1310nm, +10dBm Optical Output Optical Transmitter, 1310nm, +12dBm Optical Output Optical Transmitter, 1310nm, +13dBm Optical Output Optical Transmitter, 1310nm, +14dBm Optical Output Optical Transmitter, 1310nm, +15dBm Optical Output Note: : The "XX" in the part numbers specifies the optical connector type. SA = SC/APC; FA = FC/APC. Rev B All Specifications Subject to Change Without Notice June 2009