Tandem max capacitance (X7R only)
0603 0805 1206 1210 1812 2220 2225
16V 12nF 47nF 150nF 270nF 560nF 1.2µF 1.5µF
25V
10nF 39nF 120nF 220nF 470nF 1.0µF 1.2µF
50/63V
6.8nF 33nF 100nF 180nF 390nF 680nF 1.0µF
100V 2.2nF 10nF 47nF 82nF 220nF 470nF 680nF
200/
250V 1.0nF 4.7nF 22nF 47nF 100nF 220nF 330nF
Tandem Capacitors have been designed as a fail
safe range using a series section internal design, for
use in any application where short circuits would be
unacceptable.
When combined with Syfer’s FlexiCap™ termination, Syfer
Tandem capacitors provide an ultra robust and reliable
component, for use in the most demanding applications.
Qualication included cracking the components by severe bend tests.
Following the bend tests cracked components were subjected to
endurance / humidity tests, with no f ailur es evident due to short ci rcuits.
Note: Depending on the severity of the crack, capacitance loss was
between 0% and 50%.
Open Mode and Tandem capacitors
Qualication included cracking the components by severe bend tests.
Following the bend tests cracked components were subjected to
endurance / humidity tests, with no f ailur es evident due to short ci rcuits.
Note: Depending on the severity of the crack, capacitance loss was
between 0% and 70%.
Open Mode capacitor -
Open Mode max capacitance (X7R only)
0603 0805 1206 1210 1812 2220 2225
16V 39nF 150nF 470nF 680nF 1.5µF 3.3µF 4.7µF
25V
33nF 120nF 330nF 560nF 1.2µF 2.2µF 3.9µF
50/63V
22nF 100nF 220nF 470nF 1.0µF 1.5µF 2.7µF
100V 6.8nF 27nF 100nF 220nF 680nF 1.0µF 1.8µF
200/
250V 2.7nF 15nF 68nF 100nF 330nF 680nF 1.0µF
Ordering information - Open Mode and Tandem capacitors
1206 Y 050 0224 K X T _ _ _
Chip
size Termination Voltage Capacitance in
picofarads (pF) Capacitance
tolerance Dielectric
codes Packaging Sufx
0603
0805
1206
1210
1812
2220
2225
Y = Polymer
Termination
FlexiCap™
016 = 16V
025 = 25V
050 = 50V
063 = 63V
100 = 100V
200 = 200V
250 = 250V
First digit is 0. Second
and third digits are
signicant gures of
capacitance code.
The fourth digit is
number of zeros
following.
Example:
0224 = 220000pF
K = ±10% X = X7R
E = X7R
(AEC-Q200
product)
T = 178mm
(7”) reel
R = 330mm
(13”) reel
M01 =
Syfer
Open Mode
capacitor
T01 =
Syfer
Tandem
capacitor
X7R
Open Mode capacitors have been designed specically
for use in applications where mechanical cracking is a
severe problem and short circuits due to cracking are
unacceptable.
Open Mode capacitors use inset electrode margins,
which prevent any mechanical cracks which may form
during board assembly from connecting to the internal
electrodes.
When combined with Syfer’s FlexiCap™ termination, Syfer
Open Mode capacitors provide a robust component with the
assurance that if a part becomes cracked, the crack will be
unlikely to result in short circuit failure.
Tandem capacitor -
Speciality High Rel. and approved parts
IECQ-CECC - maximum capacitance values
0603 0805 1206 1210 1808 1812 2220 2225
16V
C0G/NP0
1.5nF 6.8nF 22nF 33nF 33nF 100nF 150nF 220nF
X7R
100nF 330nF 1.0µF 1.5µF 1.5µF 3.3µF 5.6µF 6.8µF
25V
C0G/NP0
1.0nF 4.7nF 15nF 22nF 27nF 68nF 100nF 150nF
X7R
56nF 220nF 820nF 1.2µF 1.2µF 2.2µF 4.7µF 5.6µF
50/63V
C0G/NP0
470pF 2.7nF 10nF 18nF 18nF 33nF 68nF 100nF
X7R
47nF 220nF 470nF 1.0µF 680nF 1.5µF 2.2µF 3.3µF
100V
C0G/NP0
330pF 1.8nF 6.8nF 12nF 12nF 27nF 47nF 68nF
X7R
10nF 47nF 150nF 470nF 330nF 1.0µF 1.5µF 1.5µF
200V
C0G/NP0
100pF 680pF 2.2nF 4.7nF 4.7nF 12nF 22nF 27nF
X7R
5.6nF 27nF 100nF 220nF 180nF 470nF 1.0µF 1.0µF
500V
C0G/NP0
n/a 330pF 1.5nF 3.3nF 3.3nF 10nF 15nF 22nF
X7R
n/a 8.2nF 33nF 100nF 100nF 270nF 560nF 820nF
1kV
C0G/NP0
n/a n/a 470pF 1.0nF 1.2nF 3.3nF 8.2nF 10nF
X7R
n/a n/a 4.7nF 15nF 18nF 56nF 120nF 150nF
Ordering information - IECQ-CECC ranges
1210 Y 100 0103 J D T _ _ _
Chip
size Termination Voltage Capacitance in
picofarads (pF) Capacitance
tolerance Dielectric
Release codes Packaging Sufx
code
Y = FlexiCapTM
termination base with Ni
barrier (100% matte tin
plating). RoHS compliant.
H = FlexiCapTM
termination base with Ni
barrier (Tin/lead plating
with min. 10% lead).
F = Silver Palladium. RoHS
compliant.
J = Silver base with nickel
barrier (100% matte tin
plating). RoHS compliant.
A = Silver base with nickel
barrier (Tin/lead plating
with min. 10% lead).
016 = 16V
025 = 25V
050 = 50V
063 = 63V
100 = 100V
200 = 200V
250 = 250V
500 = 500V
630 = 630V
1K0 = 1kV
First digit is 0.
Second and third
digits are signicant
gures of capacitance
code.
The fourth digit is
number of zeros
following
Example:
0103 = 10nF
<10pF
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
> 10pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
D = X7R
(2R1) with IECQ-
CECC release
F = C0G/NP0
(1B/NP0) with IECQ-
CECC release
B = 2X1/
BX released in
accordance with
IECQ-CECC
R = 2C1/
BZ released in
accordance with
IECQ-CECC
T = 178mm
(7”) reel
R = 330mm
(13”) reel
B = Bulk
pack - tubs
Used for
specic
customer
require-
ments
A range of specialist high reliability MLCC’s for use in
critical or high reliability environments. All fully tested
/ approved and available with a range of suitable
termination options, including tin/lead plating and
Syfer Flexicap™.
Ranges include :-
1. Range tested and approved in accordance with
IECQ-CECC QC32100.
2. Range qualied to the requirements of AEC-Q200.
3. Range qualied to the requirements of ESCC 3009
European Space Specication.
IECQ-CECC ranges
26
27
Speciality High Rel. and approved parts
S02A Space ranges
Maximum capacitance values
0603 0805 1206 1210 1812 2220 2225
16V
C0G/
NP0 390pF - 1.5nF 1pF - 6.8nF 1pF - 22nF 10pF - 33nF 220pF - 100nF 470pF - 150nF 560pF - 220nF
X7R 330pF - 100nF 100pF - 330nF 680pF - 1.0µF 1.0nF - 1.5µF 3.9nF - 3.3µF 10nF - 5.6µF 18nF - 6.8µF
25V
C0G/
NP0 390pF - 1.0nF 1pF - 4.7nF 1pF - 15nF 10pF - 22nF 220pF - 68nF 470pF - 100nF 560pF - 150nF
X7R 330pF - 56nF 100pF - 220nF 680pF - 820nF 1.0nF - 1.2µF 3.9nF - 2.2µF 10nF - 4.7µF 18nF - 5.6µF
50/63V
C0G/
NP0 0.5pF - 470pF 1pF - 2.7nF 1pF - 10nF 10pF - 18nF 220pF - 39nF 470pF - 68nF 560pF - 100nF
X7R 330pF - 47nF 100pF - 220nF 680pF - 470nF 1.0nF - 1.0µF 3.9nF - 2.2µF 10nF - 3.3µF 18nF - 3.3µF
100V
C0G/
NP0 1pF - 330pF 1pF - 1.8nF 1pF - 6.8nF 10pF - 12nF 220pF - 27nF 470pF - 47nF 560pF - 68nF
X7R 100pF - 10nF 100pF - 47nF 100pF - 150nF 1.0nF - 470nF 3.9nF - 1.0µF 10nF - 1.5µF 18nF - 1.5µF
200V
C0G/
NP0 1pF - 100pF 1pF - 680pF 1pF - 2.2nF 10pF - 4.7nF 220pF - 12nF 470pF - 22nF 560pF - 27nF
X7R 100pF - 5.6nF 100pF - 27nF 100pF - 100nF 1.0nF - 220nF 3.9nF - 470nF 10nF - 1.0µF 18nF - 1.0µF
500V
C0G/
NP0 - 1pF - 270pF 1pF - 1.2nF 10pF - 2.7nF 180pF - 6.8nF 390pF - 15nF 4.7nF - 18nF
X7R - 10pF - 8.2nF 180pF - 33nF 390pF - 100nF 390pF - 270nF 1nF - 560nF 15nF - 820nF
Note: In accordance with ESCC 3009.
Ordering information - S02A Space ranges product code construction
1210 A 100 0103 J X T _ _ _
Chip
size Termination(1) Voltage Capacitance in
picofarads (pF) Capacitance
tolerance
Dielectric
Rel
Release codes Packaging Sufx code
A = Silver base with
nickel barrier (Tin/
lead plating with min.
10% lead).
F = Silver Palladium.
RoHS compliant.
H = FlexiCapTM
termination base
with Ni barrier (Tin/
lead plating with min.
10% lead).
016 = 16V
025 = 25V
050 = 50V
063 = 63V
100 = 100V
200 = 200V
500 = 500V
First digit is 0.
Second and third digits
are signicant gures of
capacitance code.
The fourth digit is
number of zeros
following
Example:
0103 = 10nF
<10pF
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
> 10pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
C = C0G/NP0
(1B)
X = X7R
(2R1)
T = 178mm
(7”) reel
R = 330mm
(13”) reel
B = Bulk pack
- tubs
Q = Wafe
pack
Used for
specic
customer
requirements
S02A =
S (Space
Grade) High
Rel
Notes:
(1) Termination A, H & F available for Space applications. If another termination type is required then contact Syfer Sales.
(2) Please include Lot Acceptance Test requirement (LAT1, LAT2 or LAT3) on purchase order against each line item.
Tests conducted after 100% Burn-In (2xRV @125ºC for 168 hours):
LAT1: 4 x adhesion, 8 x rapid temp change + LAT2 and LAT3.
LAT2: 20 x 1000 hour life test + LAT3.
LAT3: 6 x TC and 4 x solderability.
AEC-Q200 ranges
AEC-Q200 ranges
0603 0805 1206 1210 1812
50/63V
C0G/NP0 470pF 2.7nF 10nF 18nF 39nF
X7R 33nF 150nF 330nF 680nF 1.5µF
100V C0G/NP0 330pF 1.8nF 6.8nF 12nF 27nF
X7R 10nF 47nF 150nF 470nF 1µF
200V C0G/NP0 100pF 680pF 2.2nF 4.7nF 12nF
X7R 5.6nF 27nF 100nF 220nF 470nF
500V C0G/NP0 n/a 330pF 1.5nF 3.9nF 10nF
X7R n/a 8.2nF 33nF 100nF 270nF
630V C0G/NP0 n/a n/a 1.0nF 1.8nF 5.6nF
X7R n/a n/a 10nF 27nF 150nF
1kV C0G/NP0 n/a n/a 470pF 1nF 3.3nF
X7R n/a n/a 4.7nF 15nF 56nF
3 Terminal EMI Components (E01) - AEC-Q200 ranges
0805 1206 1806
50V C0G/NP0
820pF 1.0nF 2.2nF
X7R 47nF 100nF 200nF
100V C0G/NP0 560pF 1.0nF 2.2nF
X7R 15nF 15nF 68nF
Note: For some lower capacitance parts, higher voltage rated parts may be supplied.
Refer to page 36.
X2Y Integrated Passive Components (E03) - AEC-Q200 ranges
0805 1206 1410 1812
50V C0G/NP0
470pF 1.5nF 5.6nF 10nF
X7R 33nF 150nF 330nF 560nF
100V C0G/NP0 330pF 1.0nF 3.9nF 6.8nF
X7R 15nF 47nF 150nF 330nF
Note: For some lower capacitance parts, higher voltage rated parts may be supplied.
Refer to page 38.
Maximum capacitance values
Ordering information - AEC-Q200
1210 Y 100 0103 J E T _ _ _
Chip
size Termination Voltage Capacitance in
picofarads (pF) Capacitance
tolerance Dielectric
Release codes Packaging Sufx
code
Y = FlexiCapTM
termination base with Ni barrier
(100% matte tin plating). RoHS
compliant.
H = FlexiCapTM
termination base with Ni barrier
(Tin/lead plating with min. 10%
lead).
F = Silver Palladium. RoHS
compliant.
J = Silver base with nickel barrier
(100% matte tin plating). RoHS
compliant.
A = Silver base with nickel barrier
(Tin/lead plating with min. 10%
lead).
016 = 16V
025 = 25V
050 = 50V
063 = 63V
100 = 100V
200 = 200V
250 = 250V
500 = 500V
630 = 630V
1K0 = 1kV
First digit is 0.
Second and third
digits are signicant
gures of
capacitance code.
The fourth digit is
number of zeros
following
Example:
0103 = 10nF
<10pF
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
> 10pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
E = X7R
(2R1) AEC-Q200
A = C0G/NP0
(1B/NP0) AEC-Q200
T = 178mm
(7”) reel
R = 330mm
(13”) reel
B = Bulk
pack - tubs
Used for
specic
customer
require-
ments
Speciality High Rel. and approved parts S02A Space ranges
Maximum capacitance values
Maximum capacitance values
28
29
Safety Certified
capacitors
Syfer Technology’s Safety Certied capacitors comply
with international UL and TÜV specications to
offer designers the option of using a surface mount
ceramic multilayer capacitor to replace leaded lm
types. Offering the benets of simple pick-and-place
assembly, reduced board space required and lower
prole, they are also available in a FlexiCap™ version
to reduce the risk of mechanical cracking.
Syfer’s high voltage capacitor expertise means the
range offers among the highest range available of
capacitance values in certain case sizes. Applications
include: modems, AC-DC power supplies and where
lightning strike or other voltage transients represent a
threat to electronic equipment.
Safety Certied capacitors
Surface mount multilayer ceramic capacitors
Meet Class Y2/X1, Y3/X2 and X2 requirements
Approved for mains ac voltages, up to 250Vac
Approved by UL and TÜV
Sizes 1808, 1812, 2211, 2215 and 2220
Smaller sizes suitable for use in equipment certified to
EN60950
Class Rated voltage Impulse voltage Insulation bridging May be used in primary circuit
Y1 250Vac 8000V Double or reinforced Line to protective earth
Y2 250Vac 5000V Basic or supplementary* Line to protective earth
Y3 250Vac None Basic or supplementary -
Y4 150Vac 2500V Basic or supplementary* Line to protective earth
X1 250Vac 4000V - Line to line
X2 250Vac 2500V - Line to line
X3 250Vac None - Line to line
* 2 x Y2 or Y4 rated may bridge double or reinforced insulation when used in series.
Certification specifications for larger sizes include IEC/
EN60384, UL/CSA60950 and UL1414
Surface mount package
Reduces board area and height restrictions
Reduced assembly costs over conventional through hole
components
FlexiCap™ option available on all sizes.
Safety Certied capacitorsCertication Chart
Safety Certied capacitors classication and approval specication.
Rheinland
Product Safety
BAUART
GEPRÜFT
TYPE
APPROVED
CHIP SIZE DIELECTRIC CAP RANGE SYFER FAMILY
CODE CLASSIFICATION APPROVAL SPECIFICATION APPROVAL
BODY
1808 C0G/NP0
4.7pF
to
1.5nF
SP(1) Y3/X2
NWGQ2, NWGQ8
IEC60384-14:2005
EN60384-14:2005
UL-60950-1, 2nd Ed
CSA 60950-1-07 2nd Ed
TÜV
UL
1808 X7R
150pF
to
2.2nF
SP(1) Y3/X2
NWGQ2, NWGQ8
IEC60384-14:2005
EN60384-14:2005
UL-60950-1, 2nd Ed
CSA 60950-1-07 2nd Ed
TÜV
UL
1808 C0G/NP0
4.7pF
to
390pF
PY2(1) Y2/X1
NWGQ2, NWGQ8
IEC60384-14:2005
EN60384-14:2005
UL-60950-1, 2nd Ed
CSA 60950-1-07 2nd Ed
TÜV
UL
1808 X7R
150pF
to
1nF
PY2(1) Y2/X1
NWGQ2, NWGQ8
IEC60384-14:2005
EN60384-14:2005
UL-60950-1, 2nd Ed
CSA 60950-1-07 2nd Ed
TÜV
UL
1812 C0G/NP0
4.7pF
to
390pF
PY2(1) Y2/X1
NWGQ2, NWGQ8
IEC60384-14:2005
EN60384-14:2005
UL-60950-1, 2nd Ed
CSA 60950-1-07 2nd Ed
TÜV
UL
1812 X7R
150pF
to
1.0nF
PY2(1) Y2/X1
NWGQ2, NWGQ8
IEC60384-14:2005
EN60384-14:2005
UL-60950-1, 2nd Ed
CSA 60950-1-07 2nd Ed
TÜV
UL
2211 C0G/NP0
4.7pF
to
1nF
SP(2) Y2/X1
NWGQ2, NWGQ8
IEC60384-14:2005
EN60384-14:2005
UL-60950-1, 2nd Ed
CSA 60950-1-07 2nd Ed
TÜV
UL
2211 X7R
100pF
to
2.2nF
SP(2) Y2/X1
NWGQ2, NWGQ8
IEC60384-14:2005
EN60384-14:2005
UL-60950-1, 2nd Ed
CSA 60950-1-07 2nd Ed
TÜV
UL
2215 C0G/NP0
820pF
to
1.0nF
SP(2) Y2/X1
NWGQ2, NWGQ8
IEC60384-14:2005
EN60384-14:2005
UL-60950-1, 2nd Ed
CSA 60950-1-07 2nd Ed
TÜV
UL
2215 X7R
2.7nF
to
3.3nF
SP(2) Y2/X1
NWGQ2, NWGQ8
IEC60384-14:2005
EN60384-14:2005
UL-60950-1, 2nd Ed
CSA 60950-1-07 2nd Ed
TÜV
UL
2220 X7R
150pF
to
4.7nF
B16
Y2/X1(2)
Y2/X1,(1)FOWX2
IEC60384-14:2005
EN60384-14:2005
UL1414: 6th Edition
TÜV
UL
2220 X7R
150pF
to
10nF
B17(2) X2 IEC60384-14:2005
EN60384:2005 TÜV
Notes Termination Availability
(1), (2) J: Silver base with Nickel Barrier (100% Matte Tin Plating). RoHS compliant.
(1), (2) Y: FlexiCap™ termination base with Nickel Barrier (100% Tin Plating). RoHS compliant.
(2) H: FlexiCap™ termination base with Nickel Barrier (Tin/ Lead plating with min 10% Lead).
(2) A: Silver base with Nickel Barrier (Tin/ Lead Plating with min 10% Lead).
PY2 Unmarked capacitors also available as released in accordance with approval specifications. Family code SY2 applies.
SP Unmarked capacitors also available as released in accordance with approval specifications. Family code SPU applies.
30
31