Open Mode and Tandem capacitors X7R Open Mode capacitors have been designed specifically for use in applications where mechanical cracking is a severe problem and short circuits due to cracking are unacceptable. A range of specialist high reliability MLCC's for use in critical or high reliability environments. All fully tested / approved and available with a range of suitable termination options, including tin/lead plating and Syfer FlexicapTM. Open Mode capacitors use inset electrode margins, which prevent any mechanical cracks which may form during board assembly from connecting to the internal electrodes. Ranges include :1. Range tested and approved in accordance with IECQ-CECC QC32100. When combined with Syfer's FlexiCapTM termination, Syfer Open Mode capacitors provide a robust component with the assurance that if a part becomes cracked, the crack will be unlikely to result in short circuit failure. 2. Range qualified to the requirements of AEC-Q200. 3. Range qualified to the requirements of ESCC 3009 European Space Specification. Open Mode capacitor - Open Mode max capacitance (X7R only) 0603 0805 1206 1210 1812 2220 2225 16V 39nF 150nF 470nF 680nF 1.5F 3.3F 4.7F 25V 33nF 120nF 330nF 560nF 1.2F 2.2F 3.9F 50/63V 22nF 100nF 220nF 470nF 1.0F 1.5F 2.7F 100V 6.8nF 27nF 100nF 220nF 680nF 1.0F 1.8F 200/ 250V 2.7nF 15nF 68nF 100nF 330nF 680nF 1.0F IECQ-CECC - maximum capacitance values Qualification included cracking the components by severe bend tests. Following the bend tests cracked components were subjected to endurance / humidity tests, with no failures evident due to short circuits. Note: Depending on the severity of the crack, capacitance loss was between 0% and 70%. 0603 16V 25V 50/63V Tandem Capacitors have been designed as a fail safe range using a series section internal design, for use in any application where short circuits would be unacceptable. 100V When combined with Syfer's FlexiCapTM termination, Syfer Tandem capacitors provide an ultra robust and reliable component, for use in the most demanding applications. 200V 500V Tandem max capacitance (X7R only) 1kV 0603 0805 1206 1210 1812 2220 2225 16V 12nF 47nF 150nF 270nF 560nF 1.2F 1.5F 25V 10nF 39nF 120nF 220nF 470nF 1.0F 1.2F 50/63V 6.8nF 33nF 100nF 180nF 390nF 680nF 1.0F 100V 2.2nF 10nF 47nF 82nF 220nF 470nF 680nF 200/ 250V 1.0nF 4.7nF 22nF 47nF 100nF 220nF 330nF Chip size 26 0603 0805 1206 1210 1812 2220 2225 Y Qualification included cracking the components by severe bend tests. Following the bend tests cracked components were subjected to endurance / humidity tests, with no failures evident due to short circuits. Note: Depending on the severity of the crack, capacitance loss was between 0% and 50%. 050 0224 K X T ___ Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric codes Packaging Suffix Y = Polymer Termination FlexiCapTM 016 = 16V 025 = 25V 050 = 50V 063 = 63V 100 = 100V 200 = 200V 250 = 250V First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following. K = 10% X = X7R E = X7R (AEC-Q200 product) T = 178mm (7") reel M01 = Syfer Open Mode capacitor Example: 0224 = 220000pF 0805 1206 1210 1808 1812 2220 2225 C0G/NP0 1.5nF 6.8nF 22nF 33nF 33nF 100nF 150nF 220nF X7R 100nF 330nF 1.0F 1.5F 1.5F 3.3F 5.6F 6.8F C0G/NP0 1.0nF 4.7nF 15nF 22nF 27nF 68nF 100nF 150nF X7R 56nF 220nF 820nF 1.2F 1.2F 2.2F 4.7F 5.6F C0G/NP0 470pF 2.7nF 10nF 18nF 18nF 33nF 68nF 100nF X7R 47nF 220nF 470nF 1.0F 680nF 1.5F 2.2F 3.3F C0G/NP0 330pF 1.8nF 6.8nF 12nF 12nF 27nF 47nF 68nF X7R 10nF 47nF 150nF 470nF 330nF 1.0F 1.5F 1.5F C0G/NP0 100pF 680pF 2.2nF 4.7nF 4.7nF 12nF 22nF 27nF X7R 5.6nF 27nF 100nF 220nF 180nF 470nF 1.0F 1.0F C0G/NP0 n/a 330pF 1.5nF 3.3nF 3.3nF 10nF 15nF 22nF X7R n/a 8.2nF 33nF 100nF 100nF 270nF 560nF 820nF C0G/NP0 n/a n/a 470pF 1.0nF 1.2nF 3.3nF 8.2nF 10nF X7R n/a n/a 4.7nF 15nF 18nF 56nF 120nF 150nF Ordering information - IECQ-CECC ranges Tandem capacitor - Ordering information - Open Mode and Tandem capacitors 1206 IECQ-CECC ranges Speciality High Rel. and approved parts R = 330mm (13") reel T01 = Syfer Tandem capacitor 1210 Y 100 0103 J D T ___ Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Release codes Packaging Suffix code Y = FlexiCapTM termination base with Ni barrier (100% matte tin plating). RoHS compliant. 016 = 16V 025 = 25V 050 = 50V 063 = 63V 100 = 100V 200 = 200V 250 = 250V 500 = 500V 630 = 630V 1K0 = 1kV First digit is 0. <10pF B = 0.1pF C = 0.25pF D = 0.5pF D = X7R (2R1) with IECQCECC release H = FlexiCapTM termination base with Ni barrier (Tin/lead plating with min. 10% lead). F = Silver Palladium. RoHS compliant. J = Silver base with nickel barrier (100% matte tin plating). RoHS compliant. A = Silver base with nickel barrier (Tin/lead plating with min. 10% lead). Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following Example: 0103 = 10nF > 10pF F = 1% G = 2% J = 5% K = 10% M = 20% F = C0G/NP0 (1B/NP0) with IECQCECC release B = 2X1/ BX released in accordance with IECQ-CECC T = 178mm (7") reel R = 330mm (13") reel B = Bulk pack - tubs Used for specific customer requirements R = 2C1/ BZ released in accordance with IECQ-CECC 27 AEC-Q200 ranges Speciality High Rel. and approved parts AEC-Q200 ranges S02A Space ranges Maximum capacitance values Maximum capacitance values 50/63V 100V 200V 500V 630V 1kV 0603 0805 1206 1210 1812 C0G/NP0 470pF 2.7nF 10nF 18nF 39nF X7R 33nF 150nF 330nF 680nF 1.5F C0G/NP0 330pF 1.8nF 6.8nF 12nF 27nF X7R 10nF 47nF 150nF 470nF 1F C0G/NP0 100pF 680pF 2.2nF 4.7nF 12nF X7R 5.6nF 27nF 100nF 220nF 470nF C0G/NP0 n/a 330pF 1.5nF 3.9nF 10nF X7R n/a 8.2nF 33nF 100nF 270nF C0G/NP0 n/a n/a 1.0nF 1.8nF 5.6nF X7R n/a n/a 10nF 27nF 150nF C0G/NP0 n/a n/a 470pF 1nF 3.3nF X7R n/a n/a 4.7nF 15nF 56nF 16V 25V 50/63V 100V Ordering information - AEC-Q200 1210 Y 100 0103 J E T ___ Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Release codes Packaging Suffix code Y = FlexiCap termination base with Ni barrier (100% matte tin plating). RoHS compliant. TM H = FlexiCapTM termination base with Ni barrier (Tin/lead plating with min. 10% lead). F = Silver Palladium. RoHS compliant. 016 = 16V 025 = 25V 050 = 50V 063 = 63V 100 = 100V 200 = 200V 250 = 250V 500 = 500V 630 = 630V 1K0 = 1kV First digit is 0. Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following Example: 0103 = 10nF J = Silver base with nickel barrier (100% matte tin plating). RoHS compliant. <10pF B = 0.1pF C = 0.25pF D = 0.5pF E = X7R (2R1) AEC-Q200 T = 178mm (7") reel A = C0G/NP0 (1B/NP0) AEC-Q200 R = 330mm (13") reel B = Bulk pack - tubs > 10pF F = 1% G = 2% J = 5% K = 10% M = 20% Used for specific customer requirements 3 Terminal EMI Components (E01) - AEC-Q200 ranges Maximum capacitance values 100V 200V 500V 0603 0805 1206 1210 C0G/ NP0 390pF - 1.5nF 1pF - 6.8nF 1pF - 22nF 10pF - 33nF X7R 330pF - 100nF 100pF - 330nF 680pF - 1.0F 1.0nF - 1.5F 3.9nF - 3.3F C0G/ NP0 390pF - 1.0nF 220pF - 68nF 470pF - 100nF 560pF - 150nF X7R 330pF - 56nF 100pF - 220nF 680pF - 820nF 1.0nF - 1.2F 3.9nF - 2.2F 10nF - 4.7F C0G/ NP0 0.5pF - 470pF 220pF - 39nF 470pF - 68nF 560pF - 100nF X7R 330pF - 47nF 100pF - 220nF 680pF - 470nF 1.0nF - 1.0F 3.9nF - 2.2F 10nF - 3.3F 18nF - 3.3F C0G/ NP0 1pF - 330pF 220pF - 27nF 470pF - 47nF 560pF - 68nF X7R 100pF - 10nF 100pF - 47nF 100pF - 150nF 1.0nF - 470nF 3.9nF - 1.0F 10nF - 1.5F 18nF - 1.5F C0G/ NP0 1pF - 100pF 1pF - 680pF 220pF - 12nF 470pF - 22nF 560pF - 27nF X7R 100pF - 5.6nF 100pF - 27nF 100pF - 100nF 1.0nF - 220nF 3.9nF - 470nF 10nF - 1.0F 18nF - 1.0F C0G/ NP0 - 1pF - 270pF 180pF - 6.8nF 390pF - 15nF 4.7nF - 18nF X7R - 10pF - 8.2nF 1pF - 4.7nF 1pF - 2.7nF 1pF - 1.8nF 1pF - 15nF 1pF - 10nF 1pF - 6.8nF 1pF - 2.2nF 1pF - 1.2nF 1812 2220 2225 220pF - 100nF 470pF - 150nF 560pF - 220nF 10pF - 22nF 10pF - 18nF 10pF - 12nF 10pF - 4.7nF 10pF - 2.7nF 10nF - 5.6F 180pF - 33nF 390pF - 100nF 390pF - 270nF 1nF - 560nF 18nF - 6.8F 18nF - 5.6F 15nF - 820nF Note: In accordance with ESCC 3009. Ordering information - S02A Space ranges product code construction A = Silver base with nickel barrier (Tin/lead plating with min. 10% lead). 50V S02A Space ranges Speciality High Rel. and approved parts 0805 1206 1806 C0G/NP0 820pF 1.0nF 2.2nF X7R 47nF 100nF 200nF C0G/NP0 560pF 1.0nF 2.2nF X7R 15nF 15nF 68nF Note: For some lower capacitance parts, higher voltage rated parts may be supplied. Refer to page 36. 1210 A 100 0103 J X T ___ Chip size Termination(1) Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Rel Release codes Packaging Suffix code A = Silver base with nickel barrier (Tin/ lead plating with min. 10% lead). F = Silver Palladium. RoHS compliant. 016 = 16V 025 = 25V 050 = 50V 063 = 63V 100 = 100V 200 = 200V 500 = 500V First digit is 0. <10pF B = 0.1pF C = 0.25pF D = 0.5pF C = C0G/NP0 (1B) T = 178mm (7") reel X = X7R (2R1) R = 330mm (13") reel Used for specific customer requirements H = FlexiCapTM termination base with Ni barrier (Tin/ lead plating with min. 10% lead). Second and third digits are significant figures of capacitance code. The fourth digit is number of zeros following Example: 0103 = 10nF > 10pF F = 1% G = 2% J = 5% K = 10% M = 20% B = Bulk pack - tubs Q = Waffle pack S02A = S (Space Grade) High Rel Notes: (1) Termination A, H & F available for Space applications. If another termination type is required then contact Syfer Sales. (2) Please include Lot Acceptance Test requirement (LAT1, LAT2 or LAT3) on purchase order against each line item. Tests conducted after 100% Burn-In (2xRV @125C for 168 hours): LAT1: 4 x adhesion, 8 x rapid temp change + LAT2 and LAT3. LAT2: 20 x 1000 hour life test + LAT3. LAT3: 6 x TC and 4 x solderability. X2Y Integrated Passive Components (E03) - AEC-Q200 ranges Maximum capacitance values 50V 28 100V 0805 1206 1410 1812 C0G/NP0 470pF 1.5nF 5.6nF 10nF X7R 33nF 150nF 330nF 560nF C0G/NP0 330pF 1.0nF 3.9nF 6.8nF X7R 15nF 47nF 150nF 330nF Note: For some lower capacitance parts, higher voltage rated parts may be supplied. Refer to page 38. 29 Safety Certified capacitors Safety Certified capacitors Safety Certified capacitors classification and approval specification. CHIP SIZE Syfer Technology's Safety Certified capacitors comply with international UL and TUV specifications to offer designers the option of using a surface mount ceramic multilayer capacitor to replace leaded film types. Offering the benefits of simple pick-and-place assembly, reduced board space required and lower profile, they are also available in a FlexiCapTM version to reduce the risk of mechanical cracking. 1808 1808 Syfer's high voltage capacitor expertise means the range offers among the highest range available of capacitance values in certain case sizes. Applications include: modems, AC-DC power supplies and where lightning strike or other voltage transients represent a threat to electronic equipment. Surface mount multilayer ceramic capacitors 1808 Meet Class Y2/X1, Y3/X2 and X2 requirements Certification specifications for larger sizes include IEC/ EN60384, UL/CSA60950 and UL1414 Approved for mains ac voltages, up to 250Vac Surface mount package Approved by UL and TUV Reduces board area and height restrictions Sizes 1808, 1812, 2211, 2215 and 2220 Reduced assembly costs over conventional through hole components Smaller sizes suitable for use in equipment certified to EN60950 1808 1812 CAP RANGE C0G/NP0 4.7pF to 1.5nF SP X7R 150pF to 2.2nF SP C0G/NP0 4.7pF to 390pF PY2 X7R 150pF to 1nF PY2 C0G/NP0 4.7pF to 390pF PY2 X7R 150pF to 1.0nF PY2 C0G/NP0 4.7pF to 1nF SP X7R 100pF to 2.2nF SP C0G/NP0 820pF to 1.0nF SP X7R 2.7nF to 3.3nF SP X7R 150pF to 4.7nF B16 150pF to 10nF B17 FlexiCapTM option available on all sizes. Class Rated voltage Impulse voltage Insulation bridging May be used in primary circuit Y1 250Vac 8000V Double or reinforced Line to protective earth Y2 250Vac 5000V Basic or supplementary* Line to protective earth Y3 250Vac None Basic or supplementary - Y4 150Vac 2500V Basic or supplementary* Line to protective earth X1 250Vac 4000V - Line to line X2 250Vac 2500V - Line to line X3 250Vac None - Line to line 1812 2211 2211 2215 2215 2220 2220 Notes (1), (2) (1), (2) (2) (2) PY2 SP SYFER FAMILY CODE DIELECTRIC * 2 x Y2 or Y4 rated may bridge double or reinforced insulation when used in series. 30 Safety Certified capacitors Certification Chart X7R (1) CLASSIFICATION APPROVAL SPECIFICATION APPROVAL BODY Y3/X2 IEC60384-14:2005 EN60384-14:2005 TUV UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL IEC60384-14:2005 EN60384-14:2005 TUV UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL IEC60384-14:2005 EN60384-14:2005 TUV UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL IEC60384-14:2005 EN60384-14:2005 TUV UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL IEC60384-14:2005 EN60384-14:2005 TUV UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL IEC60384-14:2005 EN60384-14:2005 TUV UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL IEC60384-14:2005 EN60384-14:2005 TUV UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL IEC60384-14:2005 EN60384-14:2005 TUV UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL IEC60384-14:2005 EN60384-14:2005 TUV UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL IEC60384-14:2005 EN60384-14:2005 TUV UL-60950-1, 2nd Ed CSA 60950-1-07 2nd Ed UL IEC60384-14:2005 EN60384-14:2005 TUV UL1414: 6th Edition UL IEC60384-14:2005 EN60384:2005 TUV NWGQ2, NWGQ8 (1) Y3/X2 NWGQ2, NWGQ8 (1) (1) (1) (1) (2) Y2/X1 NWGQ2, NWGQ8 Y2/X1 NWGQ2, NWGQ8 Y2/X1 NWGQ2, NWGQ8 Y2/X1 NWGQ2, NWGQ8 Y2/X1 NWGQ2, NWGQ8 (2) Y2/X1 NWGQ2, NWGQ8 (2) Y2/X1 NWGQ2, NWGQ8 (2) Y2/X1 NWGQ2, NWGQ8 (2) (2) Y2/X1 (1) Y2/X1, FOWX2 X2 Termination Availability J: Silver base with Nickel Barrier (100% Matte Tin Plating). RoHS compliant. Y: FlexiCapTM termination base with Nickel Barrier (100% Tin Plating). RoHS compliant. H: FlexiCapTM termination base with Nickel Barrier (Tin/ Lead plating with min 10% Lead). A: Silver base with Nickel Barrier (Tin/ Lead Plating with min 10% Lead). Unmarked capacitors also available as released in accordance with approval specifications. Family code SY2 applies. Unmarked capacitors also available as released in accordance with approval specifications. Family code SPU applies. BAUART GEPRUFT Rheinland Product Safety TYPE APPROVED 31