1/16
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
General-purpose Operational Amplifiers / Comparators
NOW SERIES
Comparators
LM393MX,LM2903MX,LM339MX,LM2901MX
●Description
The Universal Standard family LM393 / LM339 / LM2903 / LM2901 monolithic ICs integrate two / four independent
comparators on a single chip and feature high gain, low power consumption, and an operating voltage range from 2[V] to
36[V] (single power supply).
●Features
1) Operating temperature range Commercial Grade
LM339/393 family: 0[℃] to +70[℃]
Extended Industrial Grade
LM2903/2901 family: -40[℃] to +85[℃]
2) Open collector output
3) Single / dual power supply compatible
4) Low supply current
0.8[mA] typ.(LM2901/339 family)
0.4[mA] typ.(LM2903/393 family)
5) Low input-bias current: 25[nA] typ.
16) Low input-offset current: 5[nA] typ.
7) Input common-mode voltage range, including ground
8) Differential input voltage range equal to maximum rated supply voltage
9) Low output saturation voltage
10) TTL,MOS,CMOS compatible output
●Pin Assignment
No.11094ECT06
NOW
SERIES
LM393 family LM339 family
Quad
LM2903 family LM2901 family
LM393MX
LM339MX
LM2903MX
LM2901MX
Dual
LM393MX LM339MX
LM2901MX
LM2903M
X
S.O package14 S.O package8
OUTPUT A 1
2
3
4
－
INVERTING
INPUT A
NON-INVERTING
INPUT A
GND
V+
OUTPUT B
＋
NON-INVERTING
INPUT B
INVERTING
INPUT B
8
7
6
5
＋－
1
2
3
4
5
6
7
14
13
12
11
10
9
8
OUTPUT2
OUTPUT1
V+
INPUT1 -
INPUT1 +
INPUT2 -
INPUT2 +
－ ＋
－ ＋
－ ＋
－ ＋
OUTPUT3
OUTPUT4
GND
INPUT4 +
INPUT4 -
INPUT3 +
INPUT3 -
Technical Note
2/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
●Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol
Rating
Unit
LM393 family LM339 family LM2903 family LM2901 family
Supply Voltage V+-GND +36 V
Input Differential Voltage Vid ±36 V
Common-mode Input Voltage Vicm -0.3 to +36 V
Operating Temperature Range Topr 0 to +70 -40 to +85 ℃
Storage Temperature Range Tstg -65 to +150 ℃
Maximum Junction Temperature Tjmax +150 ℃
●Electric Characteristics
○LM393/339 Family(Unless otherwise specified, V+=+5[V])
Parameter Symbol Temperature
range
Limits
Unit Condition Fig.No
LM393 family LM339 family
Min. Typ. Max. Min. Typ. Max.
Input Offset Voltage (*1) VIO
25℃ － 1 7 － 2 7
mV
V+=5 to 30[V],VO=1.4[V],
RS=0[Ω]
VCM=0[V] to V+-1.5[V]
88
Full range － － 9 － － 15
Input Bias Voltage (*1) IIB
25℃ － 25 250 － 25 250
nA IIN(+) or IIN(-)
VCM=0[V] 88
Full range － － 400 － － 400
Input Offset Current (*1) IIO
25℃ － 5 50 － 5 50
nA IIN(+)-IIN(-),VCM=0[V] 88
Full range － － 150 － － 150
Input Common-mode
Voltage Range VICR
25℃ 0 － V
+-1.5 － － V
+-1.5
V V+=30[V] 88
Full range 0 － V
+-2.0 － － V
+-2.0
Supply Current ICC 25℃
－ 0.4 1 － 0.8 2.0
mA
RL=∞,V+=5[V]
89
－ 1 2.5 － 1.0 2.5 RL=∞,V+=36[V]
Large Signal Voltage Gain AVD 25℃ 25 200 － 25 100 － V/mV V+=15[V],VO=1[V] to 11[V]
RL≧15[kΩ] 88
Large Signal
Response Time tREL 25℃ － 300 － － 300 － ns
VIN=TTL logic swing,
Vref=1.4[V]
VRL=5[V],RL=5.1[kΩ]
89
Response Time tRE 25℃ 1.5 －
1.3 －
μs
VRL=5[V],RL=5.1[kΩ]
VIN=100[mVp-p]
overdrive=5[mV]
89
Output
Sink Current
ISINK 25℃ 6 16
－ 6 16
－ mA VIN(-)=1[V],VIN(+)=0[V]
VO≦1.5[V] 89
Output Saturation Voltage VOL
25℃ － 250 400 － 250 400
mV VIN(-)=1[V],VIN(+)=0[V]
ISINK≦4[mA] 89
Full range － － 700 － － 700
Output Leakage Current IOH
25℃ － 0.1 －
－ 0.1 － nA
VIN(-)=0[V],VIN(+)=1[V],
VO=5[V] 89
Full range － － 1.0 μA
Differential Input Voltage VID Full range － － 36 － － 36 V ALL VIN≧0[V] －
(*1) Absolute value
Technical Note
3/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
○LM2903/2901 family(Unless otherwise specified, V+=+5[V])
Parameter Symbol Temperature
range
Limit
Unit Condition
Fig.N
o.
LM2903 family LM2901 family
Min. Typ. Max. Min. Typ. Max.
Input Offset Voltage (*2) VIO
25℃ － 2 7 － 2 7
mV
V+=30[V],VO=1.4[V],
RS=0[Ω]
VCM=0[V] to V+-1.5[V]
88
Full range － 9 15 － 9 15
Input Bias Current (*2) IIB
25℃ － 25 250 － 25 250
nA IIN(+) or IIN(-)
VCM=0[V] 88
Full range － 200 500 － 200 500
Input Offset Current (*2) IIO
25℃ － 5 50 － 5 50
nA IIN(+)-IIN(-),VCM=0[V] 88
Full range － 50 200 － 50 200
Input Common-mode
Voltage Range VICR
25℃ － － V+-1.5 － － V+-1.5
V V+=30[V] 88
Full range － － V+-2.0 － － V+-2.0
Supply Current ICC 25℃
－ 0.4 1 － 0.8 2
mA
RL=∞,V+=5[V]
89
－ 1 2.5 － 1 2.5 RL=∞,V+=36[V]
Voltage Gain AVD 25℃ 25 100 － 25 100 － V/mV
V+=15[V],VO=1[V] to
11[V],
RL≧15[kΩ]
88
Large Signal Response
Time tREL 25℃ － 300 － － 300 － ns
VIN=TTL logic swing,
Vref=1.4[V]
VRL=5[V],RL=5.1[kΩ]
89
Response Time tRE 25℃ － 1.5 － － 1.3 － μs
VRL=5[V],RL=5.1[kΩ]
VIN=100[mVp-p],
overdrive=5[mV]
89
Output Sink Current ISINK 25℃ 6 16
－ 6 16
－ mA VIN(-)=1[V],VIN(+)=0[V]
VO≦1.5[V] 89
Saturation Voltage VOL
25℃ － 250 400 －
250 400
mV VIN(-)=1[V],VIN(+)=0[V]
ISINK≦4[mA] 89
Full range － 400 700 － － 700
Output Leakage Current Ileak
25℃ － 0.1 － － 0.1 － nA
VIN(-)=0[V],VIN(+)=1[V],
VO=5[V] 89
Full range － － 1 － － 1 μA VIN(-)=0[V],VIN(+)=1[V],
VO=30[V]
Differential Input Voltage VID Full range － － 36 － － 36 V ALL VIN≧0[V] －
(*2) Absolute value
Technical Note
4/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
0
200
400
600
800
1000
0 255075100125
AMBIENT TEMPERATURE [℃] .
POWER DISSIPATION [mW] .
●Reference Data LM393 family
(*)The data above is ability value of sample, it is not guaranteed. LM393family: 0[℃]~+70[℃]
Output Sink Current – Ambient Temperature
(VOUT=1.5[V])
Low Level Output Voltage
– Output Sink Current
(VCC=5[V])
Output Saturation Voltage
– Ambient Temperature
(IOL=4[mA])
Output Saturation Voltage
– Supply Voltage
(IOL=4[mA])
Supply Current – Supply Voltage
0
0.2
0.4
0.6
0.8
1
0 1020304050607080
AMBIENT TEMPERATURE [℃]
SUPPLY CURRENT [mA]
0
0.2
0.4
0.6
0.8
1
0 10203040
SUPPLY VOLTAGE [V]
SUPPLY CURRENT [mA]
.
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0 2 4 6 8 101214161820
OUTPUT SINK CURRENT [mA]
LOW LEVEL OUTPUT VOLTAGE [V]
0
10 0
20 0
30 0
40 0
50 0
0 1020304050607080
AMB IENT TEMPERATURE [ ℃]
OUTPUT SATURATION VOLTAGE [mV]
LM 393 famil
y
2V
36V
5V
-50
-40
-30
-20
-10
0
10
20
30
40
50
0 10203040
SUPPLY VOLTAGE [V]
INPUT OFFSET CURRENT [nA]
70℃
25℃
0℃
LM 393 famil
y
Input Offset Current – Supply Voltage
0
20
40
60
80
100
120
140
160
010203040
SUPPLY VOLTAGE [V]
INPUT BIAS CURRENT [nA]
LM 393 famil
y
Input Bias Current – Supply Voltage
0℃ 25℃
70℃
0
20
40
60
80
10 0
12 0
14 0
16 0
0 1020304050607080
AMBIENT TEMPERATURE [℃]
INPUT BIAS CURRENT [nA] .
Input Bias Current – Ambient Temperature
2V
5V
36V
LM 393 family
-8
-6
-4
-2
0
2
4
6
8
0 1020304050607080
AMBIENT TEMPERATURE [℃
]
INPUT OFFS E T VO LTAG E [m V]
Input Offset Voltage – Ambient Temperature
2V
5V
36V
LM 393 famil
y
Supply Current – Ambient Temperature
2V
-8
-6
-4
-2
0
2
4
6
8
0 10203040
SUPPLY VOLTAGE [V]
INPUT OFFSET VOLTAGE [mV]
Input Offset Voltage – Supply Voltage
0℃
25℃
70℃
LM 393 famil
y
LM 393 famil
y
0℃
25℃
70℃
0
10
20
30
40
0 1020304050607080
AMBIENT TEMPERATURE [℃]
OUTPUT SINK CURR ENT [mA]
36V
5V
2V
LM 393 famil
y
Derating Curve
LM 393 famil
y
25℃
70℃
0℃
0
100
200
300
400
500
010203040
SUPPLY VOLTAGE [V]
OUTPUT SATURATION VOLTAGE [mV]
LM 393 famil
y
0℃
25℃
70℃
Fig.1 Fig.2 Fig. 3
Fig.4 Fig. 5 Fig. 6
Fig. 7 Fig. 8 Fig. 9
Fig. 10 Fig. 11 Fig. 12
70
5V
36V
LM 393 family
LM 393 family
LM393MX
Technical Note
5/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
-50
-40
-30
-20
-10
0
10
20
30
40
50
0 1020 304050 607080
AMBIE NT TEM P ERA TUR E [℃]
IN PUT O FFS ET C U RREN T [ nA ]
●Reference Data LM393 family
(*)上記のデータはサンプルの実力値であり、保証するものではありません。BA10393F:-40[℃]～+85[℃]
60
70
80
90
100
110
120
130
140
0 1020304050607080
AMBIENT TEMPERATURE [°C]
POWER SUPPLY REJECTION RATIO [dB] .
0
1
2
3
4
5
0 1020 304050 607080
AMBIENT TEMPERATURE [°C]
RESPONSE TIME (HIGH to LOW) [μｓ] .
40
60
80
100
120
140
160
010203040
SUPPLY VOLTAGE [V]
COMMON MODE REJECTION RATIO[dB]
.
Common Mode Rejection Ratio
– Supply Voltage
LM 393 family
0℃ 25℃
70℃
60
70
80
90
100
110
120
130
140
0 102030 405060 70 80
AMBIENT TEMPERATURE [°C]
POWER SUPPLY REJECTION RAT IO [dB]
LM 393 famil
y
Common Mode Rejection Ratio
– Ambient Temperature
2V
5V
36V
Input Offset Current
– Ambient Temperature
LM 393 famil
y
2V
5V
36V
60
70
80
90
100
110
120
130
140
010203040
SUPPLY VOLTAGE [V]
LARGE SIGNAL VOLTAGE GAIN [dB] .
Large Signal Voltage Gain
– Supply Voltage
LM 393 famil
y
25℃
70℃ 0℃
60
70
80
90
100
110
120
130
140
0 1020304050607080
AMBIENT TEMPERATURE [°C]
LARGE SIGNAL VOLTAGE GAIN [dB] .
Large Signal Voltage Gain
– Ambient Temperature
LM 393 family
2V
5V
36V
0
1
2
3
4
5
0 1020304050607080
AMBIENT TEMPERATURE [°C]
RE SP ONS E T IME (LOW to HIG H) [μs] . .
Response Time (Low to High)
– Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
LM 393 famil
y
5mV overdrive
20mV overdrive
100mV overdrive
Response Time (High to Low)
–Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
LM 393 family
Power Supply Rejection Ratio
– Ambient Temperature
5mV overdrive
20mV overdrive
100mV overdrive
LM 393 famil
y
Fig. 13 Fig. 14 Fig. 15
Fig. 16 Fig. 17 Fig. 18
Fig. 19 Fig. 20
(*)The data above is ability value of sample, it is not guaranteed. LM393family:0[℃]~+70[℃]
Technical Note
6/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
0
200
400
600
800
1000
0 25 50 75 100 125
AMBIENT TEMPERATURE [℃] .
POWER DISSIPATION [mW] .
●Reference Data LM339 family
-8
-6
-4
-2
0
2
4
6
8
0 10203040
SUPPLY VOLTAGE [V]
INPUT OFFSET VOLTAGE [mV]
Low Level Output Voltage
– Output Sink Current
(VCC=5[V])
0
0.2
0.4
0.6
0.8
1
0 10203040
SUPPLY VOLTAGE [V]
SUPPLY CURRENT [mA]
.
Output Sink Current – Ambient Temperature
(VOUT=1.5[V])
Output Saturation Voltage
– Ambient Temperature
(IOL=4[mA])
Output Saturation Voltage
– Supply Voltage
(IOL=4[mA])
Supply Current – Supply Voltage
0
10 0
20 0
30 0
40 0
50 0
0 1020304050607080
AMBIENT TEMPERATURE [℃
]
OUTPUT SATU RATIO N VO LT AG E [mV]
0
0.2
0.4
0.6
0.8
1
0 1020304050607080
AMBIENT TEMPER ATURE [℃]
SUPPLY CURRENT [mA]
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0 2 4 6 8 101214161820
OUTPUT SINK CURRENT [mA]
LOW LEVEL OUTPUT VOLTAGE [V]
LM 339 famil
y
2V
36V
5V
-50
-40
-30
-20
-10
0
10
20
30
40
50
010203040
SUPPLY VOLTAGE [V]
INPUT OFFSET CURRENT [nA]
70℃
25℃
0℃
LM 339 famil
y
Input Offset Current – Supply Voltage
0
20
40
60
80
100
120
140
160
010203040
SUPPLY VOLTAGE [V]
INPUT BIAS CURRENT [nA]
LM 339 family
Input Bias Current – Supply Voltage
0℃ 25℃
70℃
0
20
40
60
80
10 0
12 0
14 0
16 0
0 1020304050607080
AMBIENT TEMPERATURE [℃]
INPUT BIAS CURRENT [nA] .
Input Bias Current – Ambient Temperature
2V
5V
36V
LM 339 famil
y
-8
-6
-4
-2
0
2
4
6
8
0 10 2030 40 5060 70 80
AMBIENT TEMPERATURE [℃
]
INPUT OFFS E T VO LTAG E [m V]
Input Offset Voltage – Ambient Temperature
2V
5V
36V
LM 339 famil
y
Supply Current – Ambient Temperature
5V
Input Offset Voltage – Supply Voltage
0℃
25℃
70℃
LM 339 famil
y
LM 339 famil
y
0℃
25℃
70℃
0
10
20
30
40
0 1020304050607080
AMBIENT TEMPERATURE [℃]
OUTPUT SINK CURR ENT [mA]
36V
5V
2V
LM 339 family
LM339MX
Derating Curve
LM 339 famil
y
25℃
70℃
0℃
0
100
200
300
400
500
0 10203040
SUPPLY VOLTAGE [V]
OUTPUT SATURATION VOLTAGE [mV]
LM 339 famil
y
0℃
25℃
70℃
Fig.21 Fig.22 Fig. 23
Fig.24 Fig. 25 Fig. 26
Fig. 27 Fig. 28 Fig. 29
Fig. 30 Fig. 31 Fig. 32
(*)The data above is ability value of sample, it is not guaranteed. LM339family:0[℃]~+70[℃]
70
36V
2V
LM 339 famil
y
LM 339 family
Technical Note
7/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
●Reference Data LM339 family
0
1
2
3
4
5
0 1020 304050 607080
AMBIENT TEMPERATURE [°C]
RESPONSE TIME (HIGH to LOW) [μｓ] .
-50
-40
-30
-20
-10
0
10
20
30
40
50
0 1020 304050 607080
AMBIE NT TEM P ERA TUR E [ ℃]
IN PUT O FFS ET C U RREN T [ nA ]
40
60
80
100
120
140
160
010203040
SUPPLY VOLTAGE [V]
COMMON MODE REJECTION RATIO[dB]
.
Common Mode Rejection Ratio
– Supply Voltage
LM 339 family
0℃ 25℃
70℃
60
70
80
90
100
110
120
130
140
0 102030 405060 70 80
AMBIENT TEMPERATURE [°C]
POWER SUPPLY REJECTION RAT IO [dB]
LM 339 famil
y
Common Mode Rejection Ratio
– Ambient Temperature
2V
5V
36V
Input Offset Current
– Ambient Temperature
LM 339 famil
y
2V
5V
36V
60
70
80
90
100
110
120
130
140
010203040
SUPPLY VOLTAGE [V]
LARGE SIGNAL VOLTAGE GAIN [dB] .
Large Signal Voltage Gain
– Supply Voltage
LM 339 family
25℃
70℃ 0℃
60
70
80
90
100
110
120
130
140
0 1020304050607080
AMBIENT TEMPERATURE [°C]
LARGE SIGNAL VOLT AGE GAIN [dB] .
Large Signal Voltage Gain
– Ambient Temperature
LM 339 family
2V 5V
36V
0
1
2
3
4
5
0 10 20 30 4050607080
AMB IENT TEMPERATURE [°C]
RESPONSE TIME (LOW to HIGH) [ μs] . .
Response Time (Low to High)
– Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
LM 339 famil
y
5mV overdrive
20mV overdrive
100mV overdrive
Response Time (High to Low)
–Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
60
70
80
90
100
110
120
130
140
0 1020304050607080
AMBIENT TEMPERATURE [°C]
POWER SUPPLY REJECTION RATIO [dB] .
LM 339 family
Power Supply Rejection Ratio
– Ambient Temperature
5mV overdrive
20mV overdrive
100mV overdrive
LM 339 famil
y
Fig. 33 Fig. 34 Fig. 35
Fig. 36 Fig. 37 Fig. 38
Fig. 39 Fig. 40
(*)The data above is ability value of sample, it is not guaranteed. LM339family:0[℃]~+70[℃]
Technical Note
8/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
●Reference Data LM2903 family
Input Offset Current – Supply Voltage
Input Bias Current – Supply Voltage Input Bias Current – Ambient Temperature
Input Offset Voltage – Ambient Temperature
Supply Current – Ambient Temperature
Input Offset Voltage – Supply Voltage
Low Level Output Voltage
– Output Sink Current
(VCC=5[V])
Output Saturation Voltage
– Ambient Temperature
(IOL=4[mA])
Output Sink Current – Ambient
Temperature
(VOUT=1.5[V])
Derating Curve
Supply Current – Supply Voltage
Output Saturation Voltage
– Supply Voltage
(IOL=4[mA])
2V
5V 36V
36V
5V
2V
-40℃
25℃
-40℃
85℃
LM 2903 family LM 2903 family
LM 2903 family LM 2903 family LM 2903 family
LM 2903 family LM 2903 family LM 2903 family
LM 2903 family
Fig. 44 Fig. 45 Fig. 46
Fig. 47 Fig. 48 Fig. 49
Fig. 50 Fig. 51 Fig. 52
LM 2903 family
LM 2903 family
(*)The data above is ability value of sample, it is not guaranteed.LM2903family:-40[℃]～+85[℃]
0
200
400
600
800
0 25 50 75 100
AMBIENT TEM PER A TURE [℃]
POW ER DISSIP A TION P d [mW ]
Fig. 41 Fig. 42 Fig. 43
LM 2903 family
85
25℃
85℃
5V
2V
36V
85℃
25℃
-40℃
2V
5V
85℃
36V
25℃
-40℃
-40℃ 25℃
85℃
5V
2V
36V
-40℃ 25℃
85℃
Technical Note
9/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
●Reference Data LM2903 family
Power Supply Rejection Ratio
– Ambient Temperature
Common Mode Rejection Ratio
– Supply Voltage
Common Mode Rejection Ratio
– Ambient Temperature
Input Offset Current – Ambient Temperature
Large Signal Voltage Gain
– Supply Voltage
Large Signal Voltage Gain
– Ambient Temperature
Response Time (Low to High)
– Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
Input Offset Voltage – Input Voltage
(VCC=5V)
Response Time (High to Low)
– Over Drive Voltage
Response Time (High to Low)
– Ambient Temperature
Response Time (Low to High)
– Over Drive Voltage
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
-40℃ 25℃
2V
5V
36V
2V
5V 36V
25℃ -40℃ 15V 5V
36V
-40℃
25℃
5mV overdrive
20mV overdrive
100mV
overdrive
25℃ -40℃
25℃ -40℃
5mV overdrive
20mV overdrive
100mV overdrive
LM 2903 family LM 2903 family LM 2903 family
LM 2903 family LM 2903 family LM 2903 family
LM 2903 family LM 2903 family LM 2903 family
LM 2903 family LM 2903 family
Fig. 53 Fig. 54 Fig. 55
Fig. 56 Fig. 57 Fig. 58
Fig. 59 Fig. 60 Fig. 61
Fig. 62 Fig. 63
85℃
85℃
85℃
85℃
85℃
(*)The data above is ability value of sample, it is not guaranteed. LM2903family:-40[℃]～+85[℃]
Technical Note
10/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
0
200
400
600
800
1000
0 25 50 75 100
AM BIENT TEMPERATURE [℃]
POW ER DISSIP A TION P d [mW ]
●Reference Data LM2901 family
Input Offset Current – Supply Voltage
Input Bias Current – Supply Voltage Input Bias Current – Ambient Temperature
Input Offset Voltage – Ambient Temperature
Supply Current – Ambient Temperature
Input Offset Voltage – Supply Voltage
Low Level Output Voltage
– Output Sink Current
(VCC=5[V])
Output Saturation Voltage
– Ambient Temperature
(IOL=4[mA])
Output Sink Current – Ambient
Temperature
(VOUT=1.5[V])
Supply Current – Supply Voltage
Output Saturation Voltage
– Supply Voltage
(IOL=4[mA])
2V
5V 36V
36V
5V
2V
-40℃
25℃
-40℃
85℃
LM 2901 family LM 2901 family
LM 2901 family LM 2901family LM 2901family
LM 2901 family LM 2901 family LM 2901 family
LM 2901 family
Fig. 67 Fig. 68 Fig. 69
Fig. 70 Fig. 71 Fig. 72
Fig. 73 Fig. 74 Fig. 75
LM 2901 family
LM 2901 family
(*)The data above is ability value of sample, it is not guaranteed.LM2903family:-40[℃]～+85[℃]
85
25℃
85℃
5V
2V
36V
85℃
25℃
-40℃
2V
5V
85℃
36V
25℃
-40℃
-40℃ 25℃
85℃
5V
2V
36V
-40℃ 25℃
85℃
LM 2901 family
Derating Curve
Fig. 64 Fig. 65 Fig. 66
Technical Note
11/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
●Reference Data LM2901 family
Power Supply Rejection Ratio
– Ambient Temperature
Common Mode Rejection Ratio
– Supply Voltage
Common Mode Rejection Ratio
– Ambient Temperature
Input Offset Current – Ambient Temperature
Large Signal Voltage Gain
– Supply Voltage
Large Signal Voltage Gain
– Ambient Temperature
Response Time (Low to High)
– Ambient Temperature
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
Input Offset Voltage – Input Voltage
(VCC=5V)
Response Time (High to Low)
– Over Drive Voltage
Response Time (High to Low)
– Ambient Temperature
Response Time (Low to High)
– Over Drive Voltage
(VCC=5[V],VRL=5[V],RL=5.1[kΩ])
-40℃ 25℃
2V
5V
36V
2V
5V 36V
25℃ -40℃ 15V 5V
36V
-40℃
25℃
5mV overdrive
20mV overdrive
100mV
overdrive
25℃ -40℃
25℃ -40℃
5mV overdrive
20mV overdrive
100mV overdrive
LM 2901 family LM 2901 family LM 2901 family
LM 2901 family LM 2901 family LM 2901 family
LM 2901 family LM 2901 family LM 2901 family
LM 2901 family LM 2901 family
Fig. 76 Fig. 77 Fig. 78
Fig. 79 Fig. 80 Fig. 81
Fig. 82 Fig. 83 Fig. 84
Fig. 85 Fig. 86
85℃
85℃
85℃
85℃
85℃
(*)The data above is ability value of sample, it is not guaranteed. LM2903family:-40[℃]～+85[℃]
Technical Note
12/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
●Circuit Diagram
●Measurement circuit 1 NULL Method measurement condition V+,GND,EK,VICR unit：[V]
Parameter VF S1 S2 S3
LM393/LM339 family LM2903/LM2901 family
Calculation
V + GND EK VICR V
+ GND EK VICR
Input Offset Voltage VF1 ON ON ON 5 to 30 0 -1.4 0 5 to 30 0 -1.4 0 1
Input Offset Current VF2 OFF OFF ON 5 0 -1.4 0 5 0
-1.4 0 2
Input Bias Current
VF3 OFF ON
ON
5 0
-1.4 0 5 0
-1.4 0
3
VF4 ON OFF 5 0 -1.4 0 5 0
-1.4 0
Voltage Gain
VF5
ON ON ON
15 0
-1.4 0 15 0
-1.4 0
4
VF6 15 0
-11.4 0 15 0
-11.4 0
－Calculation－
1.Input offset voltage (VIO)
2.Input offset current (IIO)
3.Input bias current (IIb)
4.Voltage gain (AVD)
Fig.87 Circuit Diagram (each Comparator)
+INPUT
V+
OUTPUT
GND
-INPUT
[V]
/RsRf1+
VF1
Vio
/
Rs)Rf(1+Ri
VF1VF2 -
Iio [A]
VF6 - VF5
/Rs)Rf(1+
Log20×
10×
AV [dB]
Fig.88 Measurement Circuit1 (each Comparator)
/Rf(1+Ri2×
VF3VF4 -
Ib [A]
/ Rs)
V
+
0.1[μF]
Rf
50[kΩ]
S1
Ri＝10[kΩ]
RS＝50[Ω]
S2
RL
S3
1000[pF]
500[kΩ]
500[kΩ]0.1[μF]
RK
EK
RK
+15[V]
-15[V]
NULL
V
VF
DUT
GND
VRL
Ri＝10[kΩ]
RS＝50[Ω]
50[kΩ]
VIC
R
Technical Note
13/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
●Measurement Circuit 2: Switch Condition
SW No. SW
1
SW
2
SW
3
SW
4
SW
5
SW
6
SW
7
Supply Current ― OFF OFF OFF OFF OFF OFF OFF
Output Sink Current VOL=1.5[V] OFF ON ON OFF ON ON OFF
Saturation Voltage IOL=4[mA] OFF ON ON OFF OFF OFF ON
Output Leakage Current VOH=36[V] OFF ON ON OFF OFF OFF ON
Response Time RL=5.1[kΩ] ON OFF ON ON OFF ON OFF
VRL=5[V]
Fig.89 Measurement Circuit 2 (each Comparator)
Fig.90 Response Time
VIN
+100[mV]
0[V]
5[V]
0[V]
2.5[V]
Tre LH
Output waveform
Input waveform
over drive
VU OT
VIN
+100[mV]
0[V]
5[V]
0[V]
2.5[V]
Tre LH
Output waveform
Input waveform
over drive
VU OT
SW1 SW2
－
＋
SW4 SW5
A
VIN-
V
+
5[V]
GND
SW3 SW7
A
VVOL/VOH
RL
SW6
VIN+ VRL
0[V]
Technical Note
14/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
●Description of electrical characteristics
Described below are descriptions of the relevant electrical terms.
Please note that item names, symbols, and their meanings may differ from those on another manufacturer’s documents.
1. Absolute maximum ratings
The absolute maximum ratings are values that should never be exceeded, since doing so may result in deterioration of
electrical characteristics or damage to the part itself as well as peripheral components.
1.1 Power supply voltage (V+/GND)
Expresses the maximum voltage that can be supplied between the positive and negative power supply terminals without
causing deterioration of the electrical characteristics or destruction of the internal circuitry.
1.2 Differential input voltage (VID)
Indicates the maximum voltage that can be supplied between the non-inverting and inverting terminals without damaging
the IC.
1.3 Input common-mode voltage range (VICR)
Signifies the maximum voltage that can be supplied to non-inverting and inverting terminals without causing deterioration
of the electrical characteristics or damage to the IC itself. Normal operation is not guaranteed within the input
common-mode voltage range of the maximum ratings – use within the input common-mode voltage range of the electric
characteristics instead.
1.4 Operating temperature range and storage temperature range (Topr,Tstg)
The operating temperature range indicates the temperature range within which the IC can operate. The higher the
ambient temperature, the lower the power consumption of the IC. The storage temperature range denotes the range of
temperatures the IC can be stored under without causing excessive deterioration of the electrical characteristics.
1.5 Power dissipation (Pd)
Indicates the power that can be consumed by a particular mounted board at ambient temperature (25°C). For packaged
products, Pd is determined by maximum junction temperature and the thermal resistance.
2. Electrical characteristics
2.1 Input offset voltage (VIO)
Signifies the voltage difference between the non-inverting and inverting terminals. It can be thought of as the input
voltage difference required for setting the output voltage to 0V.
2.2 Input offset current (IIO)
Indicates the difference of the input bias current between the non-inverting and inverting terminals.
2.3 Input bias current (IIB)
Denotes the current that flows into or out of the input terminal, it is defined by the average of the input bias current at the
non-inverting terminal and the input bias current at the inverting terminal.
2.4 Input common-mode voltage range (VICR)
Indicates the input voltage range under which the IC operates normally.
2.5 Large signal voltage gain (AVD)
The amplifying rate (gain) of the output voltage against the voltage difference between the non-inverting and inverting
terminals, it is (normally) the amplifying rate (gain) with respect to DC voltage.
AVD = (output voltage fluctuation) / (input offset fluctuation)
2.6 Circuit current (ICC)
Indicates the current of the IC itself that flows under specific conditions and during no-load steady state.
2.7 Output sink current (IOL)
Denotes the maximum current that can be output under specific output conditions.
2.8 Output saturation voltage low level output voltage (VOL)
Signifies the voltage range that can be output under specific output conditions.
2.9 Output leakage current (ILeak)
Indicates the current that flows into the IC under specific input and output conditions.
2.10 Response time (tre)
The interval between the application of input and output conditions.
2.11 Common-mode rejection ratio (CMRR)
Denotes the ratio of fluctuation of the input offset voltage when the in-phase input voltage is changed (DC fluctuation).
CMRR = (change of input common-mode voltage) / (input offset fluctuation)
2.12 Power supply rejection ratio (PSRR)
Signifies the ratio of fluctuation of the input offset voltage when the supply voltage is changed (DC fluctuation).
PSRR = (change in power supply voltage) / (input offset fluctuation)
Technical Note
15/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
●Derating Curves
Power Dissipation Power Dissipation
Package Pd[W] θja [℃/W] Package Pd[W] θja [℃/W]
SO package8 (*8) 450 3.6 SO package14 610 4.9
●Notes for use
1) Unused circuits
When there are unused circuits it is recommended that they be connected as in Fig. 103,
setting the non-inverting input terminal to a potential within the in-phase input voltage
range (VICR).
2) Input terminal voltage
Applying GND + 36V to the input terminal is possible without causing deterioration of
the electrical characteristics or destruction, irrespective of the supply voltage. However,
this does not ensure normal circuit operation. Please note that the circuit operates
normally only when the input voltage is within the common mode input voltage range of
the electric characteristics.
3) Power supply (single / dual)
The op-amp operates when the specified voltage supplied is between V+ and GND. Therefore, the single supply
op-amp can be used as a dual supply op-amp as well.
4) Power dissipation Pd
Using the unit in excess of the rated power dissipation may cause deterioration in electrical characteristics due to a rise
in chip temperature, including reduced current capability. Therefore, please take into consideration the power
dissipation (Pd) under actual operating conditions and apply a sufficient margin in thermal design. Refer to the thermal
derating curves for more information.
5) Short-circuit between pins and erroneous mounting
Incorrect mounting may damage the IC. In addition, the presence of foreign particles between the outputs, the output
and the power supply, or the output and GND may result in IC destruction.
6) Terminal short-circuits
When the output and V+ terminals are shorted, excessive output current may flow, resulting in undue heat generation
and, subsequently, destruction.
7) Operation in a strong electromagnetic field
Operation in a strong electromagnetic field may cause malfunctions.
8) Radiation
This IC is not designed to withstand radiation.
9) IC handing
Applying mechanical stress to the IC by deflecting or bending the board may cause fluctuations in the electrical
characteristics due to piezoelectric (piezo) effects.
10) Board inspection
Connecting a capacitor to a pin with low impedance may stress the IC. Therefore, discharging the capacitor after every
process is recommended. In addition, when attaching and detaching the jig during the inspection phase, ensure that
the power is turned OFF before inspection and removal. Furthermore, please take measures against ESD in the
assembly process as well as during transportation and storage.
0
200
400
600
800
1000
0 25 50 75 100
AMBIENT TEM PER A TURE [℃]
POW ER DISSIP A TION P d [mW ]
0
200
400
600
800
0 25 50 75 100
AM BIENT TEMPERATURE [℃]
POW ER DISSIP A TION P d [mW ]
NOW SERIES LM2903/2901/393/339 family
V
+
－
＋
GND
LM393MX, LM2903MX LM339MX, LM2901MX
70
LM2903MX LM2901MX
70
LM393MX
LM339MX
Fig.102 Derating Curves
θja = (Tj-Ta)/Pd[℃/W] θja = (Tj-Ta)/Pd[℃/W]
85 85
Fig.103
Technical Note
16/16
LM393MX,LM2903MX,LM339MX,LM2901MX
www.rohm.com 2011.06 - Rev.C
© 2011 ROHM Co., Ltd. All rights reserved.
●Ordering part number
L M 3 3 9 M X
Family name
LM393
LM339
LM2901
LM2903
Package
M : S.O package
Packaging and forming specification
X: Embossed tape and reel
(Unit : mm)(Unit : mm)
S.O package8
0.2±0.1
0.45Min.
234
5678
1
4.9±0.2
0.545
3.9±0.2
6.0±0.3
(MAX 5.25 include BURR)
0.42±0.1
1.27
0.175
1.375±0.1
0.1 S
S
+6°
−4°
4°
∗ Order quantity needs to be multiple of the minimum quantity.
<Tape and Reel information>
Embossed carrier tapeTape
Quantity
Direction
of feed
2500pcs
The direction is the 1pin of product is at the upper left when you hold
reel on the left hand and you pull out the tape on the right hand
()
Direction of feed
Reel 1pin
(Unit : mm)
S.O package14
(Unit : mm)
71
814
(Max 9.0 include BURR) +6°
−4°
1.05±0.2
1PIN MARK
3.9±0.1
0.42−0.04
+0.05
0.22+0.05
−0.03
0.515
1.65MAX
1.375±0.075
0.175±0.075
8.65±0.1
0.65±0.15
4°
6.0±0.2
1.27
S
0.08
M
0.08 S
∗ Order quantity needs to be multiple of the minimum quantity.
<Tape and Reel information>
Embossed carrier tapeTape
Quantity
Direction
of feed
2500pcs
The direction is the 1pin of product is at the upper left when you hold
reel on the left hand and you pull out the tape on the right hand
()
Direction of feed
Reel 1pin
R1120
A
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specied herein is subject to change for improvement without notice.
The content specied herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specied in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specied herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specied in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, ofce-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specied in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, re or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, re control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specied herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
