PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Array GNM Series For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. CONTENTS Part Numbering 2 Selection Guide 6 Chip Monolithic Ceramic Capacitors Low ESL LLp Series 1 2 High-Q GJM Series 3 4 For General Purpose GRM Series 8 Specifications and Test Methods 51 Reference Data 61 Capacitor Array GNM Series Specifications and Test Methods 70 Low ESL LLL/LLR/LLA/LLM Series 76 Specifications and Test Methods 83 High-Q Type GJM Series Specifications and Test Methods High Frequency GQM Series High Frequency GQM Series 5 Product Information For Bonding GMD Series Monolithic Microchip GMA Series 6 87 97 100 Specifications and Test Methods 108 Reference Data 111 Monolithic Microchip GMA Series Specifications and Test Methods 7 64 For Bonding GMD Series Specifications and Test Methods 112 115 119 124 Package 128 !Caution 132 Notice 144 Reference Data 151 for EU RoHS Compliant * * * All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment". For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Chip Monolithic Ceramic Capacitors (Medium Voltage) For General Purpose GRM/GRJ Series Specifications and Test Methods 1-2 High Capacitance for General Use GRM Series Specifications and Test Methods 1-3 Soft Termination Type GRJ Series Specifications and Test Methods 2 For LCD Backlight Inverter Circuit GRM/DC3.15kV Series Specifications and Test Methods 2-2 For Information Devices GR4 Series Specifications and Test Methods 2-3 For Camera Flash Circuit GR7 Series Specifications and Test Methods AC250V Type (Which Meet Japanese Law) GA2 Series Specifications and Test Methods 4 164 166 168 171 173 Only for Applications 2-1 3 160 176 177 179 180 183 184 187 188 Safety Standard Certified GA3 Series 4-1 UL, IEC60384-14 Class X1/Y2 Type GC 191 4-2 IEC60384-14 Class Y2, X1/Y2 Type GF 192 4-3 IEC60384-14 Class Y3 Type GD 194 4-4 IEC60384-14 Class X2 Type GB 195 Specifications and Test Methods 196 Reference Data (Typical Example) 200 Package 203 !Caution 206 Notice 214 ISO 9001 Certifications 217 Intro duction SimSurfing 218 Intro duction EMICON-FUN! 219 Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog. AC250V Type GA2 Series Low Dissipation Factor GRM Series Safety Standard Certified GA3 Series 1-1 Product Information 1 Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o Part Numbering Chip Monolithic Ceramic Capacitors (Part Number) GR M 18 8 q w e r t B1 1H y 102 K u i A01 D o rDimension (T) (Except GNM) qProduct ID wSeries Product ID GR GQ GM GN LL GJ GA !0 Code Dimension (T) Code Series 2 0.2mm J Soft Termination Type 3 0.3mm M Tin Plated Layer 5 0.5mm 4 Only for Information Devices / Tip & Ring 6 0.6mm 7 Only for Camera Flash Circuit 7 0.7mm M High Frequency for Flow/Reflow Soldering 8 0.8mm 9 0.85mm A Monolithic Microchip A 1.0mm D For Bonding B 1.25mm M Capacitor Array C 1.6mm L Low ESL Type D 2.0mm R Controlled ESR Low ESL Type E 2.5mm A 8-termination Low ESL Type F 3.2mm M 10-termination Low ESL Type M 1.15mm M High Frequency Low Loss Type N 1.35mm 2 For AC250V (r.m.s.) Q 1.5mm 3 Safety Standard Certified Type R 1.8mm S 2.8mm X Depends on individual standards. eDimensions (LgW) rElements (GNM Only) Code Dimensions (LgW) EIA 02 0.4g0.2mm 01005 Code Elements 03 0.6g0.3mm 0201 2 2-elements 05 0.5g0.5mm 0202 4 4-elements 08 0.8g0.8mm 0303 0D 0.38g0.38mm 015015 0M 0.9g0.6mm 0302 15 1.0g0.5mm 0402 18 1.6g0.8mm 0603 1M 1.37g1.0mm 0504 21 2.0g1.25mm 0805 22 2.8g2.8mm 1111 31 3.2g1.6mm 1206 32 3.2g2.5mm 1210 42 4.5g2.0mm 1808 43 4.5g3.2mm 1812 52 5.7g2.8mm 2211 55 5.7g5.0mm 2220 Continued on the following page. Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog. 2 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. tTemperature Characteristics Temperature Characteristic Codes Code Public STD Code Temperature Characteristics Reference Temperature Temperature Range Capacitance Change or Temperature Coefficient Operating Temperature Range 1X SL *1 JIS 20C 20 to 85C +350 to -1000ppm/C -55 to 125C 2C CH *1 JIS 20C 20 to 125C 060ppm/C -55 to 125C 2P PH *1 JIS 20C 20 to 85C -15060ppm/C -25 to 85C 2R RH *1 JIS 20C 20 to 85C -22060ppm/C -25 to 85C 2S SH *1 JIS 20C 20 to 85C -33060ppm/C -25 to 85C 2T TH *1 JIS 20C 20 to 85C -47060ppm/C -25 to 85C 3C CJ *1 JIS 20C 20 to 125C 0120ppm/C -55 to 125C 3P PJ *1 JIS 20C 20 to 85C -150120ppm/C -25 to 85C 3R RJ *1 JIS 20C 20 to 85C -220120ppm/C -25 to 85C 3S SJ *1 JIS 20C 20 to 85C -330120ppm/C -25 to 85C 3T TJ *1 JIS 20C 20 to 85C -470120ppm/C -25 to 85C 3U UJ *1 JIS 20C 20 to 85C -750120ppm/C -25 to 85C 4C CK *1 JIS 20C 20 to 125C 0250ppm/C -55 to 125C 5C C0G *1 EIA 25C 25 to 125C 030ppm/C -55 to 125C 5G X8G *1 EIA 25C 25 to 150C 030ppm/C -55 to 150C 6C C0H *1 EIA 25C 25 to 125C 060ppm/C -55 to 125C 6P P2H *1 EIA 25C 25 to 85C -15060ppm/C -55 to 125C 6R R2H *1 EIA 25C 25 to 85C -22060ppm/C -55 to 125C 6S S2H *1 EIA 25C 25 to 85C -33060ppm/C -55 to 125C 6T T2H *1 EIA 25C 25 to 85C -47060ppm/C -55 to 125C 7U U2J *1 EIA 25C 25 to 125C *6 -750120ppm/C -55 to 125C B1 B *2 JIS 20C -25 to 85C 10% -25 to 85C B3 B JIS 20C -25 to 85C 10% -25 to 85C C7 X7S EIA 25C -55 to 125C 22% -55 to 125C C8 X6S EIA 25C -55 to 105C 22% -55 to 105C D7 X7T EIA 25C -55 to 125C +22, -33% -55 to 125C D8 X6T EIA 25C -55 to 105C +22, -33% -55 to 105C E7 X7U EIA 25C -55 to 125C +22, -56% -55 to 125C F1 F *2 JIS 20C -25 to 85C +30, -80% -25 to 85C F5 Y5V EIA 25C -30 to 85C +22, -82% -30 to 85C L8 X8L *3 25C -55 to 150C +15, -40% -55 to 150C R1 R *2 JIS 20C -55 to 125C 15% -55 to 125C -55 to 125C R3 R JIS 20C -55 to 125C 15% R6 X5R EIA 25C -55 to 85C 15% -55 to 85C R7 X7R EIA 25C -55 to 125C 15% -55 to 125C R9 X8R EIA 25C -55 to 150C 15% -55 to 150C W0 - - 25C -55 to 125C 10% *4 +22, -33% *5 *1 Please refer to table for Capacitance Change under reference temperature. *2 Capacitance change is specified with 50% rated voltage applied. *3 Murata Temperature Characteristic Code. *4 Apply DC350V bias. *5 No DC bias. *6 Rated Voltage 100Vdc max : 25 to 85C -55 to 125C Continued on the following page. Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog. 3 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. oCapacitance Change from each temperature JIS Code Capacitance Change from 20C (%) Murata Code -55C -25C -10C Max. Min. Max. Min. Max. 1X - - - - - Min. - 2C 0.82 -0.45 0.49 -0.27 0.33 -0.18 2P - - 1.32 0.41 0.88 0.27 2R - - 1.70 0.72 1.13 0.48 2S - - 2.30 1.22 1.54 0.81 2T - - 3.07 1.85 2.05 1.23 3C 1.37 -0.90 0.82 -0.54 0.55 -0.36 3P - - 1.65 0.14 1.10 0.09 3R - - 2.03 0.45 1.35 0.30 3S - - 2.63 0.95 1.76 0.63 1.05 3T - - 3.40 1.58 2.27 3U - - 4.94 2.84 3.29 1.89 4C 2.56 -1.88 1.54 -1.13 1.02 -0.75 EIA Code Capacitance Change from 25C (%) Murata Code -55C -30C -10C Max. Min. Max. Min. Max. Min. 5C/5G 0.58 -0.24 0.40 -0.17 0.25 -0.11 6C 0.87 -0.48 0.59 -0.33 0.38 -0.21 6P 2.33 0.72 1.61 0.50 1.02 0.32 6R 3.02 1.28 2.08 0.88 1.32 0.56 6S 4.09 2.16 2.81 1.49 1.79 0.95 6T 5.46 3.28 3.75 2.26 2.39 1.44 7U 8.78 5.04 6.04 3.47 3.84 2.21 yRated Voltage uCapacitance 0G DC4V 0J DC6.3V Expressed by three-digit alphanumerics. The unit is picofarad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers.If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. 1A DC10V Ex.) 1C 1E Code Rated Voltage 0E DC2.5V Code Capacitance DC16V R50 0.5pF DC25V 1R0 1.0pF YA DC35V 100 10pF 1H DC50V 103 10000pF 2A DC100V 2D DC200V 2E DC250V YD DC300V 2H DC500V 2J DC630V 3A DC1kV 3D DC2kV 3F DC3.15kV BB DC350V (for Camera Flash Circuit) E2 AC250V GC X1/Y2; AC250V (Safety Standard Certified Type GC) GF Y2, X1/Y2; AC250V (Safety Standard Certified Type GF) GD Y3; AC250V (Safety Standard Certified Type GD) GB X2; AC250V (Safety Standard Certified Type GB) Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog. 4 Continued on the following page. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. iCapacitance Tolerance Capacitance Step Code Capacitance Tolerance TC Series W 0.05pF C GRM/GJM V9.9pF 0.1pF GRM/GJM V9.9pF 0.1pF V1pF 0.1pF 0.1pF B 0.25pF C 0.5pF D 2% G 5% J 10% K 20% M Z C +80%, -20% R GQM 1.1 to 9.9pF 1pF Step and E24 Series C GRM/GJM V9.9pF 0.1pF except C GRM V5pF * 1pF V1pF 0.1pF C GQM 1.1 to 9.9pF 1pF Step and E24 Series C GRM/GJM 5.1 to 9.9pF 0.1pF except C GRM 5.1 to 9.9pF * 1pF C GQM 5.1 to 9.9pF 1pF Step and E24 Series C GJM U10pF E12 Series C GQM U10pF E24 Series C, SL, U2J GRM/GA3 U10pF E12 Series C GQM/GJM U10pF B, R, X7R, X5R, ZLM GRJ/GRM/GR7/GA3 E6 Series E24 Series C0G GNM E6 Series B, R, X7R, X5R, ZLM GR4, GMD E12 Series B, R, X7R, X7S GRM/GMA E6 Series X5R, X7R, X7S GNM E3 Series X7R GA2 E3 Series X5R, X7R, X7S, X6S LLL/LLR/LLA/LLM E3 Series F, Y5V GRM E3 Series Depends on individual standards. * E24 series is also available. oIndividual Specification Code (Except LLR) Expressed by three figures. oESR (LLR Only) !0Packaging Code Packaging L o180mm Embossed Taping D o180mm Paper Taping Code ESR E o180mm Paper Taping (LLL15) E01 100m K o330mm Embossed Taping E03 220m J o330mm Paper Taping E05 470m F o330mm Paper Taping (LLL15) E07 1000m B Bulk C Bulk Case T Bulk Tray Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog. 5 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Selection Guide For Chip Monolithic Ceramic Capacitors Function Type High Capacitance Series GRM (X5R, X7R, Y5V etc.) 68pF-100F Decoupling, Smoothing Array (2 or 4 Elements) GNM 10pF-2.2F GRM (C0G) Frequency Control/Tuning, Impedance Matching 0.1pF-0.1F Class 1 TC's GRM (U2J etc.) High Speed Decoupling Low Inductance (Reverse Geometry) 2200pF-10F Low Inductance (Controlled ESR) 1.0F Low Inductance (Multi-Termination) Low ESR, Ultra Small LLL LLR LLA/LLM (From 1GHz) 0.01F-4.7F GJM (500MHz to 10GHz) 0.1pF-33pF High Frequency Applications? Lowest ESR 0.1pF-100pF GMA 100pF-0.47F GMD 100pF-1F Optical Communications Wire-Die-Bonding Medium Voltage High Frequency Snubber 250V/630V/1kV/2kV/3.15kV Low Dissipation GRM (C0G, U2J) Medium Voltage LCD Backlight Inverter 3.15kV Low Dissipation GRM (C0G) 250V/630V/1kV High Capacitance GRM (X7R) 250V/630V/1kV Soft Termination Type GRJ (X7R) Medium Voltage Decoupling, Smoothing Medium Voltage Only for Camera Flash Circuit Medium Voltage Only for Information Devices Automotive (Powertrain, Safety Equipment) Medium Voltage for Automotive (Powertrain, Safety Equipment) 10pF-10000pF 5pF-47pF 220pF-1F 470pF-1F 350V High Capacitance 10000pF-47000pF 2kV High Capacitance 100pF-10000pF Safety Standard Certified Type GD 10pF-4700pF Type GF 10pF-4700pF Safety Standard Certified Type GC 100pF-330pF Type GF 470pF-4700pF Type GB 10000pF-56000pF AC250V which meets Japanese Law 470pF-0.1F AC Lines Noise Removal 6 GQM (500MHz to 10GHz) High Capacitance Class 1 TC's GR7 GR4 GA2 GCM (X7R etc.) 100pF-47F GCM (C0G etc.) 1.0pF-56000pF 250V/630V Low Dissipation 10pF-10000pF 250V/630V Soft Termination Type 1000pF-0.47F GCM (U2J) GCJ (X7R) PDF catalog is downloaded from!CAUTION the website(for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 3 Low ESL LLL/LLR/LLA/LLM Series Specifications and Test Methods 76 83 4 High-Q Type GJM Series Specifications and Test Methods 87 97 5 High Frequency GQM Series Specifications and Test Methods Reference Data 100 108 111 6 Monolithic Microchip GMA Series Specifications and Test Methods 112 115 7 For Bonding GMD Series Specifications and Test Methods 119 124 Package !Caution Notice Reference Data 128 132 144 151 Low ESL LLp Series 64 70 High-Q GJM Series Capacitor Array GNM Series Specifications and Test Methods High Frequency GQM Series 2 Monolithic Microchip GMA Series 8 51 61 For Bonding GMD Series For General Purpose GRM Series Specifications and Test Methods Reference Data Product Information 1 Array GNM Series Chip Monolithic Ceramic Capacitors PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Chip Monolithic Ceramic Capacitors For General Purpose GRM Series Applications General electronic equipment Monolithic Microchip GMA Series For Bonding GMD Series Product Information 8 Part Number GRM022 GRM033 GRM15X GRM153 GRM155 GRM185 GRM188* GRM216 GRM219 GRM21A GRM21B GRM316 GRM319 GRM31M GRM31C GRM329 GRM32A GRM32M GRM32N GRM32C GRM32R GRM32D GRM32E L Dimensions (mm) W T e 0.4 0.02 0.2 0.02 0.2 0.02 0.07 to 0.14 0.6 0.03 0.3 0.03 0.3 0.03 0.1 to 0.2 0.25 0.05 0.1 to 0.3 1.0 0.05 0.5 0.05 0.3 0.03 0.5 0.05 0.15 to 0.35 0.5 +0/-0.1 0.2 to 0.5 1.6 0.1 0.8 0.1 0.8 0.1 0.6 0.1 0.85 0.1 0.2 to 0.7 2.0 0.1 1.25 0.1 1.0 +0/-0.2 1.25 0.1 0.6 0.1 3.2 0.15 1.6 0.15 0.85 0.1 0.3 to 0.8 1.15 0.1 3.2 0.2 1.6 0.2 1.6 0.2 0.85 +0.15/-0.05 1.0 +0/-0.2 1.15 0.1 1.35 0.15 0.3 min. 3.2 0.3 2.5 0.2 1.6 0.2 1.8 0.2 2.0 0.2 2.5 0.2 g min. 0.13 0.2 0.4 0.3 0.5 0.7 1.5 e g e 1.0 * Bulk Case: 1.6 0.07(L)g0.8 0.07(W)g0.8 0.07(T) The figures indicate typical specification. T 1. Higher resistance of solder-leaching due to the Ni-barriered termination, applicable for reflow-soldering, and flow-soldering (GRM18/21/31 type only). 2. The GRM series is a lead free product. 3. Smaller size and higher capacitance value. 4. High reliability and no polarity. 5. Excellent pulse response and noise reduction due to the low impedance at high frequency. 6. The GRM series is available in paper or embossed tape and reel packaging for automatic placement. Bulk case packaging is also available for GRM15/ 18/21(T=0.6,1.25). 7. TA replacement. High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series Features L W PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Temperature Compensating Type C0G(5C),U2J(7U) Characteristics 6 ex.6: T Dimension [mm] TC 0.4x0.2 (02) <01005> LxW [mm] C0G(5C) 0.6x0.3 1.0x0.5 1.6x0.8 (03) (15) (18) <0201> <0402> <0603> 2.0x1.25 (21) <0805> 3.2x1.6 (31) <1206> 0.6x0.3 (03) <0201> U2J(7U) 1.0x0.5 1.6x0.8 (15) (18) <0402> <0603> 2.0x1.25 3.2x1.6 (21) (31) <0805> <1206> Array GNM Series Rated Voltage 16 10 6.3 50 50 100 50 100 50 100 50 50 25 50 10 50 10 50 10 50 [Vdc] (1C) (1A) (0J) (1H) (1H) (1E) (1H) (1E) (1H) (1E) (1H) (1H) (1E) (1H) (1A) (1H) (1A) (1H) (1A) (1H) 3 3, 5 2 3 3, 5 0.4pF(R40) 2 3 3, 5 0.5pF(R50) 2 3 3, 5 0.6pF(R60) 2 3 3, 5 0.7pF(R70) 2 3 3, 5 0.8pF(R80) 2 3 3, 5 0.9pF(R90) 2 3 3, 5 1.0pF(1R0) 2 3 3, 5 1.1pF(1R1) 2 3 3, 5 1.2pF(1R2) 2 3 3, 5 1.3pF(1R3) 2 3 3, 5 1.4pF(1R4) 2 3 3, 5 1.5pF(1R5) 2 3 3, 5 1.6pF(1R6) 2 3 3, 5 1.7pF(1R7) 2 3 3, 5 1.8pF(1R8) 2 3 3, 5 1.9pF(1R9) 2 3 3, 5 2.0pF(2R0) 2 3 3, 5 2.1pF(2R1) 2 3 3, 5 2.2pF(2R2) 2 3 3, 5 2.3pF(2R3) 2 3 3, 5 2.4pF(2R4) 2 3 3, 5 2.5pF(2R5) 2 3 3, 5 2.6pF(2R6) 2 3 3, 5 2.7pF(2R7) 2 3 3, 5 2.8pF(2R8) 2 3 3, 5 2.9pF(2R9) 2 3 3, 5 3.0pF(3R0) 2 3 3, 5 3.1pF(3R1) 2 3 3, 5 3.2pF(3R2) 2 3 3, 5 3.3pF(3R3) 2 3 3, 5 3.4pF(3R4) 2 3 3, 5 3.5pF(3R5) 2 3 3, 5 3.6pF(3R6) 2 3 3, 5 3.7pF(3R7) 2 3 3, 5 3.8pF(3R8) 2 3 3, 5 3.9pF(3R9) 2 3 3, 5 4.0pF(4R0) 2 3 3, 5 4.1pF(4R1) 2 3 3, 5 4.2pF(4R2) 2 3 3, 5 4.3pF(4R3) 2 3 3, 5 4.4pF(4R4) 2 3 3, 5 4.5pF(4R5) 2 3 3, 5 4.6pF(4R6) 2 3 3, 5 4.7pF(4R7) 2 3 3, 5 4.8pF(4R8) 2 3 3, 5 4.9pF(4R9) 2 3 3, 5 The part number code is shown in ( ) and Unit is shown in [ ]. 3 5 3 5 3 5 3 5 High-Q GJM Series 2 0.3pF(R30) High Frequency GQM Series 0.2pF(R20) Monolithic Microchip GMA Series 3, 5 For Bonding GMD Series 3 Product Information 0.1pF(R10) Low ESL LLp Series Capacitance < >: EIA [inch] Code Continued on the following page. 9 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Continued from the preceding page. 6 ex.6: T Dimension [mm] TC 0.4x0.2 (02) <01005> LxW [mm] C0G(5C) 0.6x0.3 1.0x0.5 1.6x0.8 (03) (15) (18) <0201> <0402> <0603> 2.0x1.25 (21) <0805> 3.2x1.6 (31) <1206> 0.6x0.3 (03) <0201> U2J(7U) 1.0x0.5 1.6x0.8 (15) (18) <0402> <0603> 2.0x1.25 3.2x1.6 (21) (31) <0805> <1206> Rated Voltage 16 10 6.3 50 50 100 50 100 50 100 50 50 25 50 10 50 10 50 10 50 [Vdc] (1C) (1A) (0J) (1H) (1H) (1E) (1H) (1E) (1H) (1E) (1H) (1H) (1E) (1H) (1A) (1H) (1A) (1H) (1A) (1H) Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series Capacitance 5.0pF(5R0) 2 3 3, 5 5.1pF(5R1) 2 3 3, 5 5.2pF(5R2) 2 3 3, 5 5.3pF(5R3) 2 3 3, 5 5.4pF(5R4) 2 3 3, 5 5.5pF(5R5) 2 3 3, 5 5.6pF(5R6) 2 3 3, 5 5.7pF(5R7) 2 3 3, 5 5.8pF(5R8) 2 3 3, 5 5.9pF(5R9) 2 3 3, 5 6.0pF(6R0) 2 3 3, 5 6.1pF(6R1) 2 3 3, 5 6.2pF(6R2) 2 3 3, 5 6.3pF(6R3) 2 3 3, 5 6.4pF(6R4) 2 3 3, 5 6.5pF(6R5) 2 3 3, 5 6.6pF(6R6) 2 3 3, 5 6.7pF(6R7) 2 3 3, 5 6.8pF(6R8) 2 3 3, 5 6.9pF(6R9) 2 3 3, 5 7.0pF(7R0) 2 3 3, 5 7.1pF(7R1) 2 3 3, 5 7.2pF(7R2) 2 3 3, 5 7.3pF(7R3) 2 3 3, 5 7.4pF(7R4) 2 3 3, 5 7.5pF(7R5) 2 3 3, 5 7.6pF(7R6) 2 3 3, 5 7.7pF(7R7) 2 3 3, 5 7.8pF(7R8) 2 3 3, 5 7.9pF(7R9) 2 3 3, 5 8.0pF(8R0) 2 3 3, 5 8.1pF(8R1) 2 3 3, 5 8.2pF(8R2) 2 3 3, 5 8.3pF(8R3) 2 3 3, 5 8.4pF(8R4) 2 3 3, 5 8.5pF(8R5) 2 3 3, 5 8.6pF(8R6) 2 3 3, 5 8.7pF(8R7) 2 3 3, 5 8.8pF(8R8) 2 3 3, 5 8.9pF(8R9) 2 3 3, 5 9.0pF(9R0) 2 3 3, 5 9.1pF(9R1) 2 3 3, 5 9.2pF(9R2) 2 3 3, 5 9.3pF(9R3) 2 3 3, 5 9.4pF(9R4) 2 3 3, 5 9.5pF(9R5) 2 3 3, 5 9.6pF(9R6) 2 3 3, 5 9.7pF(9R7) 2 3 3, 5 9.8pF(9R8) 2 3 3, 5 9.9pF(9R9) 2 3 3, 5 The part number code is shown in ( ) and Unit is shown in [ ]. 10 < >: EIA [inch] Code 3 5 3 5 3 5 3 5 3 5 Continued on the following page. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Continued from the preceding page. 6 ex.6: T Dimension [mm] C0G(5C) 0.6x0.3 1.0x0.5 1.6x0.8 (03) (15) (18) <0201> <0402> <0603> TC 0.4x0.2 (02) <01005> LxW [mm] 2.0x1.25 (21) <0805> 3.2x1.6 (31) <1206> 0.6x0.3 (03) <0201> U2J(7U) 1.0x0.5 1.6x0.8 (15) (18) <0402> <0603> 2.0x1.25 3.2x1.6 (21) (31) <0805> <1206> Rated Voltage 16 10 6.3 50 50 100 50 100 50 100 50 50 25 50 10 50 10 50 10 50 [Vdc] (1C) (1A) (0J) (1H) (1H) (1E) (1H) (1E) (1H) (1E) (1H) (1H) (1E) (1H) (1A) (1H) (1A) (1H) (1A) (1H) 3, 5 8 8 3 5 3 3, 5 8 8 3 5 3 5 15pF(150) 2 3 3, 5 8 8 18pF(180) 2 3 3, 5 8 8 3 5 22pF(220) 2 3 3, 5 8 8 3 5 27pF(270) 2 3 3, 5 8 8 3 5 33pF(330) 2 3 3, 5 8 8 3 5 3 3, 5 8 8 3 5 47pF(470) 2 3 3, 5 8 8 3 5 56pF(560) 2 2 3 3, 5 8 8 3 5 68pF(680) 2 2 3 3, 5 8 8 3 5 82pF(820) 2 2 3 3, 5 8 8 3 5 100pF(101) 2 2 3 3, 5 8 8 6 3 5 120pF(121) 3, 5 8 8 6 5 150pF(151) 3, 5 8 8 6 5 180pF(181) 3, 5 8 8 6 5 220pF(221) 3, 5 8 8 6 270pF(271) 3, 5 8 8 6 330pF(331) 3, 5 8 8 6 390pF(391) 3, 5 8 8 6 470pF(471) 3, 5 8 8 6 560pF(561) 3, 5 8 8 6 680pF(681) 3, 5 8 8 6 820pF(821) 5 8 8 6 1000pF(102) 5 8 8 6 8 8 6 6 5 8 1500pF(152) 8 8 6 6 5 8 1800pF(182) 8 6 6 9 5 8 2200pF(222) 8 6 6 9 5 5, 8 2700pF(272) 8 6 6 9 5 5, 8 3300pF(332) 8 6 6 9 5 5, 8 3900pF(392) 8 6 9 5 5, 8 4700pF(472) 6 9 9 5 5, 8 5600pF(562) 9 9 9 8 5 6800pF(682) 9 9 9 8 5 8200pF(822) 9 9 9 8 5 10000pF(103) 9 9 9 8 5 6 12000pF(123) 9 9 9 8 6 15000pF(153) 9 9 9 8 6 6 9 18000pF(183) B 9 9 8 22000pF(223) B 9 9 8 Monolithic Microchip GMA Series 8 1200pF(122) For Bonding GMD Series 2 27000pF(273) 9 9 33000pF(333) 9 A 39000pF(393) 9 B 47000pF(473) M B 56000pF(563) M 9 9 68000pF(683) C B M 82000pF(823) C B M 0.1F(104) C B M The part number code is shown in ( ) and Unit is shown in [ ]. Product Information 39pF(390) Low ESL LLp Series 3 2 High-Q GJM Series 2 12pF(120) High Frequency GQM Series 10pF(100) Array GNM Series Capacitance < >: EIA [inch] Code 11 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Temperature Compensating Type P2H(6P),R2H(6R),S2H(6S),T2H(6T) Characteristics 6 ex.6: T Dimension [mm] TC P2H (6P) R2H (6R) S2H (6S) T2H (6T) Rated Voltage 50 25 50 25 50 25 50 [Vdc] (1H) (1E) (1H) (1E) (1H) (1E) (1H) Capacitance 1.0pF(1R0) 5 3 5 3 5 3 5 2.0pF(2R0) 5 3 5 3 5 3 5 3.0pF(3R0) 5 3 5 3 5 3 5 4.0pF(4R0) 5 3 5 3 5 3 5 5.0pF(5R0) 5 3 5 3 5 3 5 6.0pF(6R0) 5 3 5 3 5 3 5 7.0pF(7R0) 5 3 5 3 5 3 5 8.0pF(8R0) 5 3 5 3 5 3 5 9.0pF(9R0) 5 3 5 3 5 3 5 10pF(100) 5 3 5 3 5 3 5 12pF(120) 5 3 5 3 5 3 5 15pF(150) 5 3 5 3 5 3 5 18pF(180) 5 3 5 3 5 3 5 22pF(220) 5 3 5 3 5 3 5 27pF(270) 5 3 5 3 5 3 5 33pF(330) 3 5 3 5 3 5 39pF(390) 3 3 5 3 5 47pF(470) 3 3 3 5 56pF(560) 3 3 3 5 68pF(680) 3 3 3 5 82pF(820) 3 3 3 5 100pF(101) 3 3 3 The part number code is shown in ( ) and Unit is shown in [ ]. Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series LxW 1.0x0.5 0.6x0.3 1.0x0.5 0.6x0.3 1.0x0.5 0.6x0.3 1.0x0.5 (15) (03) (15) (03) (15) (03) (15) [mm] <0402> <0201> <0402> <0201> <0402> <0201> <0402> 12 5 < >: EIA [inch] Code PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Continued from the preceding page. High Dielectric Constant Type X7R(R7)/X7S(C7)/X7T(D7)/X7U(E7) Characteristics 5 ex.5: T Dimension [mm] LxW 0.4x0.2 (02) [mm] <01005> 0.6x0.3 (03) <0201> 1.0x0.5 (15) <0402> 1.6x0.8 (18) <0603> Rated Voltage 10 25 16 10 6.3 100 50 25 16 10 100 50 25 16 10 6.3 4 [Vdc] (1A) (1E) (1C) (1A) (0J) (2A) (1H) (1E) (1C) (1A) (2A) (1H) (1E) (1C) (1A) (0J) (0G) 2 3 3 150pF(151) 2 3 3 220pF(221) 2 3 3 5 X, 5 8 8 330pF(331) 2 3 3 5 X, 5 8 8 470pF(471) 2 3 3 5 X, 5 8 8 680pF(681) 3 3 5 X, 5 8 8 1000pF(102) 3 3 5 X, 5 8 8 1500pF(152) 3 3 8 8 8 8 8 X 8 8 8 5 X, 5 2200pF(222) 3 3 5 5 3300pF(332) 3 3 5 5 5 5 5 X 8 8 8 5 5 X 8 8 8 5 5 X 8 8 8 15000pF(153) 5 5 5 8 8 22000pF(223) 5 5 5 8 8 33000pF(333) 5 5 8 8 47000pF(473) 5 5 8 8 8 8 8 8 6800pF(682) 3 3 10000pF(103) 3 3 68000pF(683) 5 5 0.10F(104) 5 5 0.15F(154) 5 8 8 0.22F(224) 5 8 8 8 0.33F(334) 0.47F(474) 8 0.68F(684) 1.0F(105) 8 2.2F(225) The part number code is shown in ( ) and Unit is shown in [ ]. 8 8 8 8 8 8 8 5, 8 8 8 8 < >: EIA [inch] Code Monolithic Microchip GMA Series 3 Continued on the following page. For Bonding GMD Series 3 Product Information 4700pF(472) X High-Q GJM Series 2 High Frequency GQM Series 68pF(680) 100pF(101) Low ESL LLp Series Array GNM Series Capacitance 13 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Continued from the preceding page. 3.2x1.6 (31) <1206> 2.0x1.25 (21) <0805> LxW [mm] 3.2x2.5 (32) <1210> Rated Voltage 100 50 25 16 10 6.3 4 100 50 25 16 10 6.3 4 100 50 35 25 16 10 6.3 4 [Vdc] (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (YA) (1E) (1C) (1A) (0J) (0G) 6800pF(682) 9 10000pF(103) B 15000pF(153) B 9 22000pF(223) B M 33000pF(333) B 9 47000pF(473) B B M M 68000pF(683) B 9 0.10F(104) B B 9 0.15F(154) B B M M B B M M 9 9 M M 9 9 Low ESL LLp Series Array GNM Series Capacitance 0.22F(224) A 0.33F(334) A 9 B 0.47F(474) B B 9 0.68F(684) 1.0F(105) B 2.2F(225) M 9 9 M M 9, B B C M B B 4.7F(475) B High-Q GJM Series 10F(106) C B C B B B 22F(226) C C M M C # 9 ,C C C B E E E C C C 47F(476) D E E C 100F(107) ex.5: T Dimension [mm] 0.6x0.3 (03) <0201> 1.0x0.5 (15) <0402> Rated Voltage 6.3 4 25 6.3 4 [Vdc] (0J) (0G) (1E) (0J) (0G) Capacitance 15000pF(153) 3 3 22000pF(223) 3 3 33000pF(333) 3 3 47000pF(473) 3 3 68000pF(683) 5 0.10F(104) 5 For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High Dielectric Constant Type X6S(C8)/X6T(D8) Characteristics LxW [mm] 0.15F(154) 5 5 0.22F(224) 5 5 0.33F(334) 5 5 0.47F(474) 5 5 0.68F(684) # 5 5 1.6x0.8 (18) <0603> LxW [mm] 2.0x1.25 (21) <0805> 3.2x2.5 (32) <1210> 3.2x1.6 (31) <1206> 25 10 6.3 4 Rated Voltage 25 10 6.3 4 2.5 25 16 10 6.3 4 25 16 10 6.3 4 [Vdc] (1E) (1A) (0J) (0G) (0E) (1E) (1C) (1A) (0J) (0G) (1E) (1C) (1A) (0J) (0G) (1E) (1A) (0J) (0G) Capacitance Product Information 1.0F(105) 2.2F(225) 8 5 5 6 8 8 9 4.7F(475) 8 10F(106) 8# 22F(226) 47F(476) 100F(107) B 8 B 6 9 9 B 9, B B# 9 C B M 9 9 C C C D E C C N E E E The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code # These Part Numbers have individual testing conditions on Durability of GRM Series Specifications and Test Methods (2). Please refer to P60. 14 E E The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code # These Part Numbers have individual testing conditions on Durability of GRM Series Specifications and Test Methods (2). Please refer to P60. 5 E E E PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Continued from the preceding page. High Dielectric Constant Type X5R(R6) Characteristics 5 ex.5: T Dimension [mm] LxW 0.4x0.2 (02) [mm] <01005> : Please refer to X7R(R7) etc. Characteristics. 0.6x0.3 (03) <0201> 1.0x0.5 (15) <0402> 1.6x0.8 (18) <0603> Rated Voltage 10 6.3 25 16 10 6.3 100 50 25 16 10 6.3 100 50 25 16 10 6.3 4 [Vdc] (1A) (0J) (1E) (1C) (1A) (0J) (2A) (1H) (1E) (1C) (1A) (0J) (2A) (1H) (1E) (1C) (1A) (0J) (0G) 2 330pF(331) 2 470pF(471) 2 680pF(681) 2 2 1000pF(102) 2 2 1500pF(152) 2 2 3 2200pF(222) 2 2 3 3300pF(332) 2 2 3 4700pF(472) 2 2 3 6800pF(682) 2 2 3 10000pF(103) 2 2 3 5 8 5 8 5 8 8 3 15000pF(153) 3 22000pF(223) 3 5 33000pF(333) 3 5 5 47000pF(473) 3 5 5 8 68000pF(683) 5 5 5 0.10F(104) 5 5 5 8 0.15F(154) 5 5 0.22F(224) 5 5 0.33F(334) 5 5 0.47F(474) 5 5 0.68F(684) 5 5 1.0F(105) 5 2.2F(225) High-Q GJM Series 2 220pF(221) 8 8 8 8 8 5, 8 5 8 8 High Frequency GQM Series 150pF(151) 8 4.7F(475) 8 10F(106) 8 22F(226) The part number code is shown in ( ) and Unit is shown in [ ]. Monolithic Microchip GMA Series 2 8 8 < >: EIA [inch] Code Continued on the following page. For Bonding GMD Series 2 Product Information 68pF(680) 100pF(101) Low ESL LLp Series Array GNM Series Capacitance 15 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Continued from the preceding page. 2.0x1.25 (21) <0805> LxW [mm] 3.2x1.6 (31) <1206> 3.2x2.5 (32) <1210> Rated Voltage 100 50 25 16 10 6.3 4 100 50 25 16 10 6.3 4 100 50 35 25 16 10 6.3 4 [Vdc] (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (YA) (1E) (1C) (1A) (0J) (0G) Capacitance 6800pF(682) Array GNM Series 10000pF(103) 15000pF(153) 22000pF(223) 33000pF(333) 47000pF(473) 68000pF(683) 0.10F(104) 0.15F(154) Low ESL LLp Series 0.22F(224) 0.33F(334) 0.47F(474) 0.68F(684) 1.0F(105) 2.2F(225) 4.7F(475) High-Q GJM Series 10F(106) 22F(226) 6 6, B 9, B 9, B B B C B 9, B 9, B C 9, B 9, B B 9 47F(476) 100F(107) Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series The part number code is shown in ( ) and Unit is shown in [ ]. 16 6 9,C 9,C B E 9, C 9 C C C C C C < >: EIA [inch] Code D E E C E E PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. LxW [mm] 0.4x0.2(02)<01005> 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 16(1C) 50(1H) 50(1H) Rated Volt. [Vdc] 0.05pF(W) GRM0335C1HR10WD01D 0.1pF(B) GRM0335C1HR10BD01D GRM1555C1HR10BA01D GRM0335C1HR20WD01D GRM1555C1HR20WA01D GRM0225C1CR20BD05L GRM0335C1HR20BD01D GRM1555C1HR20BA01D 0.05pF(W) GRM0225C1CR30WD05L GRM0335C1HR30WD01D GRM1555C1HR30WA01D 0.1pF(B) GRM0225C1CR30BD05L GRM0335C1HR30BD01D GRM1555C1HR30BA01D 0.4pF(R40) 0.05pF(W) GRM0225C1CR40WD05L GRM0335C1HR40WD01D GRM1555C1HR40WA01D 0.1pF(B) GRM0225C1CR40BD05L GRM0335C1HR40BD01D GRM1555C1HR40BA01D 0.5pF(R50) 0.05pF(W) GRM0225C1CR50WD05L GRM0335C1HR50WD01D GRM1555C1HR50WA01D 0.1pF(B) GRM0225C1CR50BD05L GRM0335C1HR50BD01D GRM1555C1HR50BA01D 0.6pF(R60) 0.05pF(W) GRM0225C1CR60WD05L GRM0335C1HR60WD01D GRM1555C1HR60WA01D 0.1pF(B) GRM0225C1CR60BD05L GRM0335C1HR60BD01D GRM1555C1HR60BA01D 0.7pF(R70) 0.05pF(W) GRM0225C1CR70WD05L GRM0335C1HR70WD01D GRM1555C1HR70WA01D 0.1pF(B) GRM0225C1CR70BD05L GRM0335C1HR70BD01D GRM1555C1HR70BA01D 0.8pF(R80) 0.05pF(W) GRM0225C1CR80WD05L GRM0335C1HR80WD01D GRM1555C1HR80WA01D 0.1pF(B) GRM0225C1CR80BD05L GRM0335C1HR80BD01D GRM1555C1HR80BA01D 0.05pF(W) GRM0225C1CR90WD05L GRM0335C1HR90WD01D GRM1555C1HR90WA01D 0.1pF(B) GRM0225C1CR90BD05L GRM0335C1HR90BD01D GRM1555C1HR90BA01D 0.05pF(W) GRM0225C1C1R0WD05L GRM0335C1H1R0WD01D GRM1555C1H1R0WA01D 0.9pF(R90) 1.0pF(1R0) 1.1pF(1R1) 1.2pF(1R2) 1.3pF(1R3) 1.4pF(1R4) 1.5pF(1R5) 1.6pF(1R6) 1.7pF(1R7) 1.8pF(1R8) 1.9pF(1R9) 0.1pF(B) GRM0225C1C1R0BD05L GRM0335C1H1R0BD01D GRM1555C1H1R0BA01D 0.25pF(C) GRM0225C1C1R0CD05L GRM0335C1H1R0CD01D GRM1555C1H1R0CA01D 0.05pF(W) GRM0225C1C1R1WD05L GRM0335C1H1R1WD01D GRM1555C1H1R1WA01D 0.1pF(B) GRM0225C1C1R1BD05L GRM0335C1H1R1BD01D GRM1555C1H1R1BA01D 0.25pF(C) GRM0225C1C1R1CD05L GRM0335C1H1R1CD01D GRM1555C1H1R1CA01D 0.05pF(W) GRM0225C1C1R2WD05L GRM0335C1H1R2WD01D GRM1555C1H1R2WA01D 0.1pF(B) GRM0225C1C1R2BD05L GRM0335C1H1R2BD01D GRM1555C1H1R2BA01D 0.25pF(C) GRM0225C1C1R2CD05L GRM0335C1H1R2CD01D GRM1555C1H1R2CA01D 0.05pF(W) GRM0225C1C1R3WD05L GRM0335C1H1R3WD01D GRM1555C1H1R3WA01D 0.1pF(B) GRM0225C1C1R3BD05L GRM0335C1H1R3BD01D GRM1555C1H1R3BA01D 0.25pF(C) GRM0225C1C1R3CD05L GRM0335C1H1R3CD01D GRM1555C1H1R3CA01D 0.05pF(W) GRM0225C1C1R4WD05L GRM0335C1H1R4WD01D GRM1555C1H1R4WA01D 0.1pF(B) GRM0225C1C1R4BD05L GRM0335C1H1R4BD01D GRM1555C1H1R4BA01D 0.25pF(C) GRM0225C1C1R4CD05L GRM0335C1H1R4CD01D GRM1555C1H1R4CA01D 0.05pF(W) GRM0225C1C1R5WD05L GRM0335C1H1R5WD01D GRM1555C1H1R5WA01D GRM1555C1H1R5BA01D 0.1pF(B) GRM0225C1C1R5BD05L GRM0335C1H1R5BD01D 0.25pF(C) GRM0225C1C1R5CD05L GRM0335C1H1R5CD01D GRM1555C1H1R5CA01D 0.05pF(W) GRM0225C1C1R6WD05L GRM0335C1H1R6WD01D GRM1555C1H1R6WA01D 0.1pF(B) GRM0225C1C1R6BD05L GRM0335C1H1R6BD01D GRM1555C1H1R6BA01D 0.25pF(C) GRM0225C1C1R6CD05L GRM0335C1H1R6CD01D GRM1555C1H1R6CA01D 0.05pF(W) GRM0225C1C1R7WD05L GRM0335C1H1R7WD01D GRM1555C1H1R7WA01D 0.1pF(B) GRM0225C1C1R7BD05L GRM0335C1H1R7BD01D GRM1555C1H1R7BA01D 0.25pF(C) GRM0225C1C1R7CD05L GRM0335C1H1R7CD01D GRM1555C1H1R7CA01D 0.05pF(W) GRM0225C1C1R8WD05L GRM0335C1H1R8WD01D GRM1555C1H1R8WA01D 0.1pF(B) GRM0225C1C1R8BD05L GRM0335C1H1R8BD01D GRM1555C1H1R8BA01D 0.25pF(C) GRM0225C1C1R8CD05L GRM0335C1H1R8CD01D GRM1555C1H1R8CA01D 0.05pF(W) GRM0225C1C1R9WD05L GRM0335C1H1R9WD01D GRM1555C1H1R9WA01D 0.1pF(B) GRM0225C1C1R9BD05L GRM0335C1H1R9BD01D GRM1555C1H1R9BA01D 0.25pF(C) GRM0225C1C1R9CD05L GRM0335C1H1R9CD01D GRM1555C1H1R9CA01D The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GR M 02 2 5C 1C q w e r t y R20 W u i Low ESL LLp Series 0.1pF(B) 0.3pF(R30) GRM0225C1CR20WD05L High-Q GJM Series 0.05pF(W) High Frequency GQM Series 0.2pF(R20) Array GNM Series GRM1555C1HR10WA01D Monolithic Microchip GMA Series 0.1pF(R10) Part Number For Bonding GMD Series Tolerance < >: EIA [inch] Code D05 L o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. 17 Product Information Capacitance For General GRM Series Temperature Compensating Type C0G(5C) Characteristics PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] Capacitance 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 16(1C) 50(1H) 50(1H) Tolerance Array GNM Series 2.0pF(2R0) 2.1pF(2R1) 2.2pF(2R2) Low ESL LLp Series 2.3pF(2R3) 2.4pF(2R4) High-Q GJM Series 2.5pF(2R5) 2.6pF(2R6) 2.7pF(2R7) High Frequency GQM Series 2.8pF(2R8) 2.9pF(2R9) Monolithic Microchip GMA Series 3.0pF(3R0) 3.1pF(3R1) 3.2pF(3R2) For Bonding GMD Series 3.3pF(3R3) 3.4pF(3R4) 3.5pF(3R5) Product Information 0.4x0.2(02)<01005> Rated Volt. [Vdc] Part Number 0.05pF(W) GRM0225C1C2R0WD05L GRM0335C1H2R0WD01D GRM1555C1H2R0WA01D 0.1pF(B) GRM0225C1C2R0BD05L GRM0335C1H2R0BD01D GRM1555C1H2R0BA01D 0.25pF(C) GRM0225C1C2R0CD05L GRM0335C1H2R0CD01D GRM1555C1H2R0CA01D 0.05pF(W) GRM0225C1C2R1WD05L GRM0335C1H2R1WD01D GRM1555C1H2R1WA01D 0.1pF(B) GRM0225C1C2R1BD05L GRM0335C1H2R1BD01D GRM1555C1H2R1BA01D 0.25pF(C) GRM0225C1C2R1CD05L GRM0335C1H2R1CD01D GRM1555C1H2R1CA01D 0.05pF(W) GRM0225C1C2R2WD05L GRM0335C1H2R2WD01D GRM1555C1H2R2WA01D GRM1555C1H2R2BA01D 0.1pF(B) GRM0225C1C2R2BD05L GRM0335C1H2R2BD01D 0.25pF(C) GRM0225C1C2R2CD05L GRM0335C1H2R2CD01D GRM1555C1H2R2CA01D 0.05pF(W) GRM0225C1C2R3WD05L GRM0335C1H2R3WD01D GRM1555C1H2R3WA01D GRM1555C1H2R3BA01D 0.1pF(B) GRM0225C1C2R3BD05L GRM0335C1H2R3BD01D 0.25pF(C) GRM0225C1C2R3CD05L GRM0335C1H2R3CD01D GRM1555C1H2R3CA01D 0.05pF(W) GRM0225C1C2R4WD05L GRM0335C1H2R4WD01D GRM1555C1H2R4WA01D GRM1555C1H2R4BA01D 0.1pF(B) GRM0225C1C2R4BD05L GRM0335C1H2R4BD01D 0.25pF(C) GRM0225C1C2R4CD05L GRM0335C1H2R4CD01D GRM1555C1H2R4CA01D 0.05pF(W) GRM0225C1C2R5WD05L GRM0335C1H2R5WD01D GRM1555C1H2R5WA01D GRM1555C1H2R5BA01D 0.1pF(B) GRM0225C1C2R5BD05L GRM0335C1H2R5BD01D 0.25pF(C) GRM0225C1C2R5CD05L GRM0335C1H2R5CD01D GRM1555C1H2R5CA01D 0.05pF(W) GRM0225C1C2R6WD05L GRM0335C1H2R6WD01D GRM1555C1H2R6WA01D 0.1pF(B) GRM0225C1C2R6BD05L GRM0335C1H2R6BD01D GRM1555C1H2R6BA01D 0.25pF(C) GRM0225C1C2R6CD05L GRM0335C1H2R6CD01D GRM1555C1H2R6CA01D 0.05pF(W) GRM0225C1C2R7WD05L GRM0335C1H2R7WD01D GRM1555C1H2R7WA01D 0.1pF(B) GRM0225C1C2R7BD05L GRM0335C1H2R7BD01D GRM1555C1H2R7BA01D 0.25pF(C) GRM0225C1C2R7CD05L GRM0335C1H2R7CD01D GRM1555C1H2R7CA01D 0.05pF(W) GRM0225C1C2R8WD05L GRM0335C1H2R8WD01D GRM1555C1H2R8WA01D 0.1pF(B) GRM0225C1C2R8BD05L GRM0335C1H2R8BD01D GRM1555C1H2R8BA01D 0.25pF(C) GRM0225C1C2R8CD05L GRM0335C1H2R8CD01D GRM1555C1H2R8CA01D 0.05pF(W) GRM0225C1C2R9WD05L GRM0335C1H2R9WD01D GRM1555C1H2R9WA01D GRM1555C1H2R9BA01D 0.1pF(B) GRM0225C1C2R9BD05L GRM0335C1H2R9BD01D 0.25pF(C) GRM0225C1C2R9CD05L GRM0335C1H2R9CD01D GRM1555C1H2R9CA01D 0.05pF(W) GRM0225C1C3R0WD05L GRM0335C1H3R0WD01D GRM1555C1H3R0WA01D 0.1pF(B) GRM0225C1C3R0BD05L GRM0335C1H3R0BD01D GRM1555C1H3R0BA01D 0.25pF(C) GRM0225C1C3R0CD05L GRM0335C1H3R0CD01D GRM1555C1H3R0CA01D 0.05pF(W) GRM0225C1C3R1WD05L GRM0335C1H3R1WD01D GRM1555C1H3R1WA01D GRM1555C1H3R1BA01D 0.1pF(B) GRM0225C1C3R1BD05L GRM0335C1H3R1BD01D 0.25pF(C) GRM0225C1C3R1CD05L GRM0335C1H3R1CD01D GRM1555C1H3R1CA01D 0.05pF(W) GRM0225C1C3R2WD05L GRM0335C1H3R2WD01D GRM1555C1H3R2WA01D GRM1555C1H3R2BA01D 0.1pF(B) GRM0225C1C3R2BD05L GRM0335C1H3R2BD01D 0.25pF(C) GRM0225C1C3R2CD05L GRM0335C1H3R2CD01D GRM1555C1H3R2CA01D 0.05pF(W) GRM0225C1C3R3WD05L GRM0335C1H3R3WD01D GRM1555C1H3R3WA01D 0.1pF(B) GRM0225C1C3R3BD05L GRM0335C1H3R3BD01D GRM1555C1H3R3BA01D 0.25pF(C) GRM0225C1C3R3CD05L GRM0335C1H3R3CD01D GRM1555C1H3R3CA01D 0.05pF(W) GRM0225C1C3R4WD05L GRM0335C1H3R4WD01D GRM1555C1H3R4WA01D 0.1pF(B) GRM0225C1C3R4BD05L GRM0335C1H3R4BD01D GRM1555C1H3R4BA01D 0.25pF(C) GRM0225C1C3R4CD05L GRM0335C1H3R4CD01D GRM1555C1H3R4CA01D 0.05pF(W) GRM0225C1C3R5WD05L GRM0335C1H3R5WD01D GRM1555C1H3R5WA01D 0.1pF(B) GRM0225C1C3R5BD05L GRM0335C1H3R5BD01D GRM1555C1H3R5BA01D 0.25pF(C) GRM0225C1C3R5CD05L GRM0335C1H3R5CD01D GRM1555C1H3R5CA01D The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GR M 02 2 5C 1C q w e r t y 2R0 W u i < >: EIA [inch] Code D05 L o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 18 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 3.9pF(3R9) 4.0pF(4R0) 4.1pF(4R1) 4.2pF(4R2) 4.3pF(4R3) 4.4pF(4R4) 4.5pF(4R5) 4.6pF(4R6) 4.7pF(4R7) 4.8pF(4R8) 4.9pF(4R9) 5.0pF(5R0) 5.1pF(5R1) 0.05pF(W) GRM0225C1C3R6WD05L GRM0335C1H3R6WD01D GRM1555C1H3R6WA01D 0.1pF(B) GRM0225C1C3R6BD05L GRM0335C1H3R6BD01D GRM1555C1H3R6BA01D 0.25pF(C) GRM0225C1C3R6CD05L GRM0335C1H3R6CD01D GRM1555C1H3R6CA01D 0.05pF(W) GRM0225C1C3R7WD05L GRM0335C1H3R7WD01D GRM1555C1H3R7WA01D 0.1pF(B) GRM0225C1C3R7BD05L GRM0335C1H3R7BD01D GRM1555C1H3R7BA01D 0.25pF(C) GRM0225C1C3R7CD05L GRM0335C1H3R7CD01D GRM1555C1H3R7CA01D 0.05pF(W) GRM0225C1C3R8WD05L GRM0335C1H3R8WD01D GRM1555C1H3R8WA01D GRM1555C1H3R8BA01D 0.1pF(B) GRM0225C1C3R8BD05L GRM0335C1H3R8BD01D 0.25pF(C) GRM0225C1C3R8CD05L GRM0335C1H3R8CD01D GRM1555C1H3R8CA01D 0.05pF(W) GRM0225C1C3R9WD05L GRM0335C1H3R9WD01D GRM1555C1H3R9WA01D GRM1555C1H3R9BA01D 0.1pF(B) GRM0225C1C3R9BD05L GRM0335C1H3R9BD01D 0.25pF(C) GRM0225C1C3R9CD05L GRM0335C1H3R9CD01D GRM1555C1H3R9CA01D 0.05pF(W) GRM0225C1C4R0WD05L GRM0335C1H4R0WD01D GRM1555C1H4R0WA01D GRM1555C1H4R0BA01D 0.1pF(B) GRM0225C1C4R0BD05L GRM0335C1H4R0BD01D 0.25pF(C) GRM0225C1C4R0CD05L GRM0335C1H4R0CD01D GRM1555C1H4R0CA01D 0.05pF(W) GRM0225C1C4R1WD05L GRM0335C1H4R1WD01D GRM1555C1H4R1WA01D GRM1555C1H4R1BA01D 0.1pF(B) GRM0225C1C4R1BD05L GRM0335C1H4R1BD01D 0.25pF(C) GRM0225C1C4R1CD05L GRM0335C1H4R1CD01D GRM1555C1H4R1CA01D 0.05pF(W) GRM0225C1C4R2WD05L GRM0335C1H4R2WD01D GRM1555C1H4R2WA01D 0.1pF(B) GRM0225C1C4R2BD05L GRM0335C1H4R2BD01D GRM1555C1H4R2BA01D 0.25pF(C) GRM0225C1C4R2CD05L GRM0335C1H4R2CD01D GRM1555C1H4R2CA01D 0.05pF(W) GRM0225C1C4R3WD05L GRM0335C1H4R3WD01D GRM1555C1H4R3WA01D 0.1pF(B) GRM0225C1C4R3BD05L GRM0335C1H4R3BD01D GRM1555C1H4R3BA01D 0.25pF(C) GRM0225C1C4R3CD05L GRM0335C1H4R3CD01D GRM1555C1H4R3CA01D 0.05pF(W) GRM0225C1C4R4WD05L GRM0335C1H4R4WD01D GRM1555C1H4R4WA01D 0.1pF(B) GRM0225C1C4R4BD05L GRM0335C1H4R4BD01D GRM1555C1H4R4BA01D 0.25pF(C) GRM0225C1C4R4CD05L GRM0335C1H4R4CD01D GRM1555C1H4R4CA01D 0.05pF(W) GRM0225C1C4R5WD05L GRM0335C1H4R5WD01D GRM1555C1H4R5WA01D GRM1555C1H4R5BA01D 0.1pF(B) GRM0225C1C4R5BD05L GRM0335C1H4R5BD01D 0.25pF(C) GRM0225C1C4R5CD05L GRM0335C1H4R5CD01D GRM1555C1H4R5CA01D 0.05pF(W) GRM0225C1C4R6WD05L GRM0335C1H4R6WD01D GRM1555C1H4R6WA01D 0.1pF(B) GRM0225C1C4R6BD05L GRM0335C1H4R6BD01D GRM1555C1H4R6BA01D 0.25pF(C) GRM0225C1C4R6CD05L GRM0335C1H4R6CD01D GRM1555C1H4R6CA01D 0.05pF(W) GRM0225C1C4R7WD05L GRM0335C1H4R7WD01D GRM1555C1H4R7WA01D GRM1555C1H4R7BA01D 0.1pF(B) GRM0225C1C4R7BD05L GRM0335C1H4R7BD01D 0.25pF(C) GRM0225C1C4R7CD05L GRM0335C1H4R7CD01D GRM1555C1H4R7CA01D 0.05pF(W) GRM0225C1C4R8WD05L GRM0335C1H4R8WD01D GRM1555C1H4R8WA01D GRM1555C1H4R8BA01D 0.1pF(B) GRM0225C1C4R8BD05L GRM0335C1H4R8BD01D 0.25pF(C) GRM0225C1C4R8CD05L GRM0335C1H4R8CD01D GRM1555C1H4R8CA01D 0.05pF(W) GRM0225C1C4R9WD05L GRM0335C1H4R9WD01D GRM1555C1H4R9WA01D 0.1pF(B) GRM0225C1C4R9BD05L GRM0335C1H4R9BD01D GRM1555C1H4R9BA01D 0.25pF(C) GRM0225C1C4R9CD05L GRM0335C1H4R9CD01D GRM1555C1H4R9CA01D 0.05pF(W) GRM0225C1C5R0WD05L GRM0335C1H5R0WD01D GRM1555C1H5R0WA01D 0.1pF(B) GRM0225C1C5R0BD05L GRM0335C1H5R0BD01D GRM1555C1H5R0BA01D 0.25pF(C) GRM0225C1C5R0CD05L GRM0335C1H5R0CD01D GRM1555C1H5R0CA01D 0.05pF(W) GRM0225C1C5R1WD05L GRM0335C1H5R1WD01D GRM1555C1H5R1WA01D 0.1pF(B) GRM0225C1C5R1BD05L GRM0335C1H5R1BD01D GRM1555C1H5R1BA01D 0.25pF(C) GRM0225C1C5R1CD05L GRM0335C1H5R1CD01D GRM1555C1H5R1CA01D 0.5pF(D) GRM0225C1C5R1DD05L GRM0335C1H5R1DD01D GRM1555C1H5R1DA01D The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series Part Number Low ESL LLp Series 3.8pF(3R8) 50(1H) Tolerance High-Q GJM Series 3.7pF(3R7) 1.0x0.5(15)<0402> 50(1H) High Frequency GQM Series 3.6pF(3R6) 0.6x0.3(03)<0201> 16(1C) Monolithic Microchip GMA Series Capacitance 0.4x0.2(02)<01005> For Bonding GMD Series Rated Volt. [Vdc] Product Information LxW [mm] For General GRM Series Temperature Compensating Type C0G(5C) Characteristics < >: EIA [inch] Code 19 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] Capacitance 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 16(1C) 50(1H) 50(1H) Tolerance Array GNM Series 5.2pF(5R2) 5.3pF(5R3) Low ESL LLp Series 5.4pF(5R4) 5.5pF(5R5) High-Q GJM Series 5.6pF(5R6) 5.7pF(5R7) High Frequency GQM Series 5.8pF(5R8) Monolithic Microchip GMA Series 5.9pF(5R9) 6.0pF(6R0) For Bonding GMD Series 6.1pF(6R1) 6.2pF(6R2) 6.3pF(6R3) Product Information 0.4x0.2(02)<01005> Rated Volt. [Vdc] Part Number 0.05pF(W) GRM0225C1C5R2WD05L GRM0335C1H5R2WD01D GRM1555C1H5R2WA01D 0.1pF(B) GRM0225C1C5R2BD05L GRM0335C1H5R2BD01D GRM1555C1H5R2BA01D 0.25pF(C) GRM0225C1C5R2CD05L GRM0335C1H5R2CD01D GRM1555C1H5R2CA01D 0.5pF(D) GRM0225C1C5R2DD05L GRM0335C1H5R2DD01D GRM1555C1H5R2DA01D 0.05pF(W) GRM0225C1C5R3WD05L GRM0335C1H5R3WD01D GRM1555C1H5R3WA01D 0.1pF(B) GRM0225C1C5R3BD05L GRM0335C1H5R3BD01D GRM1555C1H5R3BA01D 0.25pF(C) GRM0225C1C5R3CD05L GRM0335C1H5R3CD01D GRM1555C1H5R3CA01D 0.5pF(D) GRM0225C1C5R3DD05L GRM0335C1H5R3DD01D GRM1555C1H5R3DA01D 0.05pF(W) GRM0225C1C5R4WD05L GRM0335C1H5R4WD01D GRM1555C1H5R4WA01D 0.1pF(B) GRM0225C1C5R4BD05L GRM0335C1H5R4BD01D GRM1555C1H5R4BA01D 0.25pF(C) GRM0225C1C5R4CD05L GRM0335C1H5R4CD01D GRM1555C1H5R4CA01D 0.5pF(D) GRM0225C1C5R4DD05L GRM0335C1H5R4DD01D GRM1555C1H5R4DA01D 0.05pF(W) GRM0225C1C5R5WD05L GRM0335C1H5R5WD01D GRM1555C1H5R5WA01D 0.1pF(B) GRM0225C1C5R5BD05L GRM0335C1H5R5BD01D GRM1555C1H5R5BA01D 0.25pF(C) GRM0225C1C5R5CD05L GRM0335C1H5R5CD01D GRM1555C1H5R5CA01D 0.5pF(D) GRM0225C1C5R5DD05L GRM0335C1H5R5DD01D GRM1555C1H5R5DA01D 0.05pF(W) GRM0225C1C5R6WD05L GRM0335C1H5R6WD01D GRM1555C1H5R6WA01D 0.1pF(B) GRM0225C1C5R6BD05L GRM0335C1H5R6BD01D GRM1555C1H5R6BA01D 0.25pF(C) GRM0225C1C5R6CD05L GRM0335C1H5R6CD01D GRM1555C1H5R6CA01D 0.5pF(D) GRM0225C1C5R6DD05L GRM0335C1H5R6DD01D GRM1555C1H5R6DA01D 0.05pF(W) GRM0225C1C5R7WD05L GRM0335C1H5R7WD01D GRM1555C1H5R7WA01D 0.1pF(B) GRM0225C1C5R7BD05L GRM0335C1H5R7BD01D GRM1555C1H5R7BA01D 0.25pF(C) GRM0225C1C5R7CD05L GRM0335C1H5R7CD01D GRM1555C1H5R7CA01D 0.5pF(D) GRM0225C1C5R7DD05L GRM0335C1H5R7DD01D GRM1555C1H5R7DA01D 0.05pF(W) GRM0225C1C5R8WD05L GRM0335C1H5R8WD01D GRM1555C1H5R8WA01D 0.1pF(B) GRM0225C1C5R8BD05L GRM0335C1H5R8BD01D GRM1555C1H5R8BA01D 0.25pF(C) GRM0225C1C5R8CD05L GRM0335C1H5R8CD01D GRM1555C1H5R8CA01D 0.5pF(D) GRM0225C1C5R8DD05L GRM0335C1H5R8DD01D GRM1555C1H5R8DA01D 0.05pF(W) GRM0225C1C5R9WD05L GRM0335C1H5R9WD01D GRM1555C1H5R9WA01D 0.1pF(B) GRM0225C1C5R9BD05L GRM0335C1H5R9BD01D GRM1555C1H5R9BA01D 0.25pF(C) GRM0225C1C5R9CD05L GRM0335C1H5R9CD01D GRM1555C1H5R9CA01D 0.5pF(D) GRM0225C1C5R9DD05L GRM0335C1H5R9DD01D GRM1555C1H5R9DA01D 0.05pF(W) GRM0225C1C6R0WD05L GRM0335C1H6R0WD01D GRM1555C1H6R0WA01D 0.1pF(B) GRM0225C1C6R0BD05L GRM0335C1H6R0BD01D GRM1555C1H6R0BA01D 0.25pF(C) GRM0225C1C6R0CD05L GRM0335C1H6R0CD01D GRM1555C1H6R0CA01D 0.5pF(D) GRM0225C1C6R0DD05L GRM0335C1H6R0DD01D GRM1555C1H6R0DA01D 0.05pF(W) GRM0225C1C6R1WD05L GRM0335C1H6R1WD01D GRM1555C1H6R1WA01D 0.1pF(B) GRM0225C1C6R1BD05L GRM0335C1H6R1BD01D GRM1555C1H6R1BA01D 0.25pF(C) GRM0225C1C6R1CD05L GRM0335C1H6R1CD01D GRM1555C1H6R1CA01D 0.5pF(D) GRM0225C1C6R1DD05L GRM0335C1H6R1DD01D GRM1555C1H6R1DA01D 0.05pF(W) GRM0225C1C6R2WD05L GRM0335C1H6R2WD01D GRM1555C1H6R2WA01D 0.1pF(B) GRM0225C1C6R2BD05L GRM0335C1H6R2BD01D GRM1555C1H6R2BA01D 0.25pF(C) GRM0225C1C6R2CD05L GRM0335C1H6R2CD01D GRM1555C1H6R2CA01D 0.5pF(D) GRM0225C1C6R2DD05L GRM0335C1H6R2DD01D GRM1555C1H6R2DA01D 0.05pF(W) GRM0225C1C6R3WD05L GRM0335C1H6R3WD01D GRM1555C1H6R3WA01D 0.1pF(B) GRM0225C1C6R3BD05L GRM0335C1H6R3BD01D GRM1555C1H6R3BA01D 0.25pF(C) GRM0225C1C6R3CD05L GRM0335C1H6R3CD01D GRM1555C1H6R3CA01D 0.5pF(D) GRM0225C1C6R3DD05L GRM0335C1H6R3DD01D GRM1555C1H6R3DA01D The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GR M 02 2 5C 1C q w e r t y 5R2 W u i < >: EIA [inch] Code D05 L o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 20 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6.7pF(6R7) 6.8pF(6R8) 6.9pF(6R9) 7.0pF(7R0) 7.1pF(7R1) 7.2pF(7R2) 7.3pF(7R3) 7.4pF(7R4) 7.5pF(7R5) 0.05pF(W) GRM0225C1C6R4WD05L GRM0335C1H6R4WD01D GRM1555C1H6R4WA01D 0.1pF(B) GRM0225C1C6R4BD05L GRM0335C1H6R4BD01D GRM1555C1H6R4BA01D 0.25pF(C) GRM0225C1C6R4CD05L GRM0335C1H6R4CD01D GRM1555C1H6R4CA01D 0.5pF(D) GRM0225C1C6R4DD05L GRM0335C1H6R4DD01D GRM1555C1H6R4DA01D 0.05pF(W) GRM0225C1C6R5WD05L GRM0335C1H6R5WD01D GRM1555C1H6R5WA01D 0.1pF(B) GRM0225C1C6R5BD05L GRM0335C1H6R5BD01D GRM1555C1H6R5BA01D 0.25pF(C) GRM0225C1C6R5CD05L GRM0335C1H6R5CD01D GRM1555C1H6R5CA01D 0.5pF(D) GRM0225C1C6R5DD05L GRM0335C1H6R5DD01D GRM1555C1H6R5DA01D 0.05pF(W) GRM0225C1C6R6WD05L GRM0335C1H6R6WD01D GRM1555C1H6R6WA01D 0.1pF(B) GRM0225C1C6R6BD05L GRM0335C1H6R6BD01D GRM1555C1H6R6BA01D 0.25pF(C) GRM0225C1C6R6CD05L GRM0335C1H6R6CD01D GRM1555C1H6R6CA01D 0.5pF(D) GRM0225C1C6R6DD05L GRM0335C1H6R6DD01D GRM1555C1H6R6DA01D 0.05pF(W) GRM0225C1C6R7WD05L GRM0335C1H6R7WD01D GRM1555C1H6R7WA01D 0.1pF(B) GRM0225C1C6R7BD05L GRM0335C1H6R7BD01D GRM1555C1H6R7BA01D 0.25pF(C) GRM0225C1C6R7CD05L GRM0335C1H6R7CD01D GRM1555C1H6R7CA01D 0.5pF(D) GRM0225C1C6R7DD05L GRM0335C1H6R7DD01D GRM1555C1H6R7DA01D 0.05pF(W) GRM0225C1C6R8WD05L GRM0335C1H6R8WD01D GRM1555C1H6R8WA01D 0.1pF(B) GRM0225C1C6R8BD05L GRM0335C1H6R8BD01D GRM1555C1H6R8BA01D 0.25pF(C) GRM0225C1C6R8CD05L GRM0335C1H6R8CD01D GRM1555C1H6R8CA01D 0.5pF(D) GRM0225C1C6R8DD05L GRM0335C1H6R8DD01D GRM1555C1H6R8DA01D 0.05pF(W) GRM0225C1C6R9WD05L GRM0335C1H6R9WD01D GRM1555C1H6R9WA01D 0.1pF(B) GRM0225C1C6R9BD05L GRM0335C1H6R9BD01D GRM1555C1H6R9BA01D 0.25pF(C) GRM0225C1C6R9CD05L GRM0335C1H6R9CD01D GRM1555C1H6R9CA01D 0.5pF(D) GRM0225C1C6R9DD05L GRM0335C1H6R9DD01D GRM1555C1H6R9DA01D 0.05pF(W) GRM0225C1C7R0WD05L GRM0335C1H7R0WD01D GRM1555C1H7R0WA01D 0.1pF(B) GRM0225C1C7R0BD05L GRM0335C1H7R0BD01D GRM1555C1H7R0BA01D 0.25pF(C) GRM0225C1C7R0CD05L GRM0335C1H7R0CD01D GRM1555C1H7R0CA01D 0.5pF(D) GRM0225C1C7R0DD05L GRM0335C1H7R0DD01D GRM1555C1H7R0DA01D 0.05pF(W) GRM0225C1C7R1WD05L GRM0335C1H7R1WD01D GRM1555C1H7R1WA01D 0.1pF(B) GRM0225C1C7R1BD05L GRM0335C1H7R1BD01D GRM1555C1H7R1BA01D 0.25pF(C) GRM0225C1C7R1CD05L GRM0335C1H7R1CD01D GRM1555C1H7R1CA01D 0.5pF(D) GRM0225C1C7R1DD05L GRM0335C1H7R1DD01D GRM1555C1H7R1DA01D 0.05pF(W) GRM0225C1C7R2WD05L GRM0335C1H7R2WD01D GRM1555C1H7R2WA01D 0.1pF(B) GRM0225C1C7R2BD05L GRM0335C1H7R2BD01D GRM1555C1H7R2BA01D 0.25pF(C) GRM0225C1C7R2CD05L GRM0335C1H7R2CD01D GRM1555C1H7R2CA01D 0.5pF(D) GRM0225C1C7R2DD05L GRM0335C1H7R2DD01D GRM1555C1H7R2DA01D 0.05pF(W) GRM0225C1C7R3WD05L GRM0335C1H7R3WD01D GRM1555C1H7R3WA01D 0.1pF(B) GRM0225C1C7R3BD05L GRM0335C1H7R3BD01D GRM1555C1H7R3BA01D 0.25pF(C) GRM0225C1C7R3CD05L GRM0335C1H7R3CD01D GRM1555C1H7R3CA01D 0.5pF(D) GRM0225C1C7R3DD05L GRM0335C1H7R3DD01D GRM1555C1H7R3DA01D 0.05pF(W) GRM0225C1C7R4WD05L GRM0335C1H7R4WD01D GRM1555C1H7R4WA01D 0.1pF(B) GRM0225C1C7R4BD05L GRM0335C1H7R4BD01D GRM1555C1H7R4BA01D 0.25pF(C) GRM0225C1C7R4CD05L GRM0335C1H7R4CD01D GRM1555C1H7R4CA01D 0.5pF(D) GRM0225C1C7R4DD05L GRM0335C1H7R4DD01D GRM1555C1H7R4DA01D 0.05pF(W) GRM0225C1C7R5WD05L GRM0335C1H7R5WD01D GRM1555C1H7R5WA01D 0.1pF(B) GRM0225C1C7R5BD05L GRM0335C1H7R5BD01D GRM1555C1H7R5BA01D 0.25pF(C) GRM0225C1C7R5CD05L GRM0335C1H7R5CD01D GRM1555C1H7R5CA01D 0.5pF(D) GRM0225C1C7R5DD05L GRM0335C1H7R5DD01D GRM1555C1H7R5DA01D The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series Part Number Low ESL LLp Series 6.6pF(6R6) 50(1H) Tolerance High-Q GJM Series 6.5pF(6R5) 1.0x0.5(15)<0402> 50(1H) High Frequency GQM Series 6.4pF(6R4) 0.6x0.3(03)<0201> 16(1C) Monolithic Microchip GMA Series Capacitance 0.4x0.2(02)<01005> For Bonding GMD Series Rated Volt. [Vdc] Product Information LxW [mm] For General GRM Series Temperature Compensating Type C0G(5C) Characteristics < >: EIA [inch] Code 21 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] Capacitance 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 16(1C) 50(1H) 50(1H) Tolerance Array GNM Series 7.6pF(7R6) 7.7pF(7R7) Low ESL LLp Series 7.8pF(7R8) 7.9pF(7R9) High-Q GJM Series 8.0pF(8R0) 8.1pF(8R1) High Frequency GQM Series 8.2pF(8R2) Monolithic Microchip GMA Series 8.3pF(8R3) 8.4pF(8R4) For Bonding GMD Series 8.5pF(8R5) 8.6pF(8R6) 8.7pF(8R7) Product Information 0.4x0.2(02)<01005> Rated Volt. [Vdc] Part Number 0.05pF(W) GRM0225C1C7R6WD05L GRM0335C1H7R6WD01D GRM1555C1H7R6WA01D 0.1pF(B) GRM0225C1C7R6BD05L GRM0335C1H7R6BD01D GRM1555C1H7R6BA01D 0.25pF(C) GRM0225C1C7R6CD05L GRM0335C1H7R6CD01D GRM1555C1H7R6CA01D 0.5pF(D) GRM0225C1C7R6DD05L GRM0335C1H7R6DD01D GRM1555C1H7R6DA01D 0.05pF(W) GRM0225C1C7R7WD05L GRM0335C1H7R7WD01D GRM1555C1H7R7WA01D 0.1pF(B) GRM0225C1C7R7BD05L GRM0335C1H7R7BD01D GRM1555C1H7R7BA01D 0.25pF(C) GRM0225C1C7R7CD05L GRM0335C1H7R7CD01D GRM1555C1H7R7CA01D 0.5pF(D) GRM0225C1C7R7DD05L GRM0335C1H7R7DD01D GRM1555C1H7R7DA01D 0.05pF(W) GRM0225C1C7R8WD05L GRM0335C1H7R8WD01D GRM1555C1H7R8WA01D 0.1pF(B) GRM0225C1C7R8BD05L GRM0335C1H7R8BD01D GRM1555C1H7R8BA01D 0.25pF(C) GRM0225C1C7R8CD05L GRM0335C1H7R8CD01D GRM1555C1H7R8CA01D 0.5pF(D) GRM0225C1C7R8DD05L GRM0335C1H7R8DD01D GRM1555C1H7R8DA01D 0.05pF(W) GRM0225C1C7R9WD05L GRM0335C1H7R9WD01D GRM1555C1H7R9WA01D 0.1pF(B) GRM0225C1C7R9BD05L GRM0335C1H7R9BD01D GRM1555C1H7R9BA01D 0.25pF(C) GRM0225C1C7R9CD05L GRM0335C1H7R9CD01D GRM1555C1H7R9CA01D 0.5pF(D) GRM0225C1C7R9DD05L GRM0335C1H7R9DD01D GRM1555C1H7R9DA01D 0.05pF(W) GRM0225C1C8R0WD05L GRM0335C1H8R0WD01D GRM1555C1H8R0WA01D 0.1pF(B) GRM0225C1C8R0BD05L GRM0335C1H8R0BD01D GRM1555C1H8R0BA01D 0.25pF(C) GRM0225C1C8R0CD05L GRM0335C1H8R0CD01D GRM1555C1H8R0CA01D 0.5pF(D) GRM0225C1C8R0DD05L GRM0335C1H8R0DD01D GRM1555C1H8R0DA01D 0.05pF(W) GRM0225C1C8R1WD05L GRM0335C1H8R1WD01D GRM1555C1H8R1WA01D 0.1pF(B) GRM0225C1C8R1BD05L GRM0335C1H8R1BD01D GRM1555C1H8R1BA01D 0.25pF(C) GRM0225C1C8R1CD05L GRM0335C1H8R1CD01D GRM1555C1H8R1CA01D 0.5pF(D) GRM0225C1C8R1DD05L GRM0335C1H8R1DD01D GRM1555C1H8R1DA01D 0.05pF(W) GRM0225C1C8R2WD05L GRM0335C1H8R2WD01D GRM1555C1H8R2WA01D 0.1pF(B) GRM0225C1C8R2BD05L GRM0335C1H8R2BD01D GRM1555C1H8R2BA01D 0.25pF(C) GRM0225C1C8R2CD05L GRM0335C1H8R2CD01D GRM1555C1H8R2CA01D 0.5pF(D) GRM0225C1C8R2DD05L GRM0335C1H8R2DD01D GRM1555C1H8R2DA01D 0.05pF(W) GRM0225C1C8R3WD05L GRM0335C1H8R3WD01D GRM1555C1H8R3WA01D 0.1pF(B) GRM0225C1C8R3BD05L GRM0335C1H8R3BD01D GRM1555C1H8R3BA01D 0.25pF(C) GRM0225C1C8R3CD05L GRM0335C1H8R3CD01D GRM1555C1H8R3CA01D 0.5pF(D) GRM0225C1C8R3DD05L GRM0335C1H8R3DD01D GRM1555C1H8R3DA01D 0.05pF(W) GRM0225C1C8R4WD05L GRM0335C1H8R4WD01D GRM1555C1H8R4WA01D 0.1pF(B) GRM0225C1C8R4BD05L GRM0335C1H8R4BD01D GRM1555C1H8R4BA01D 0.25pF(C) GRM0225C1C8R4CD05L GRM0335C1H8R4CD01D GRM1555C1H8R4CA01D 0.5pF(D) GRM0225C1C8R4DD05L GRM0335C1H8R4DD01D GRM1555C1H8R4DA01D 0.05pF(W) GRM0225C1C8R5WD05L GRM0335C1H8R5WD01D GRM1555C1H8R5WA01D 0.1pF(B) GRM0225C1C8R5BD05L GRM0335C1H8R5BD01D GRM1555C1H8R5BA01D 0.25pF(C) GRM0225C1C8R5CD05L GRM0335C1H8R5CD01D GRM1555C1H8R5CA01D 0.5pF(D) GRM0225C1C8R5DD05L GRM0335C1H8R5DD01D GRM1555C1H8R5DA01D 0.05pF(W) GRM0225C1C8R6WD05L GRM0335C1H8R6WD01D GRM1555C1H8R6WA01D 0.1pF(B) GRM0225C1C8R6BD05L GRM0335C1H8R6BD01D GRM1555C1H8R6BA01D 0.25pF(C) GRM0225C1C8R6CD05L GRM0335C1H8R6CD01D GRM1555C1H8R6CA01D 0.5pF(D) GRM0225C1C8R6DD05L GRM0335C1H8R6DD01D GRM1555C1H8R6DA01D 0.05pF(W) GRM0225C1C8R7WD05L GRM0335C1H8R7WD01D GRM1555C1H8R7WA01D 0.1pF(B) GRM0225C1C8R7BD05L GRM0335C1H8R7BD01D GRM1555C1H8R7BA01D 0.25pF(C) GRM0225C1C8R7CD05L GRM0335C1H8R7CD01D GRM1555C1H8R7CA01D 0.5pF(D) GRM0225C1C8R7DD05L GRM0335C1H8R7DD01D GRM1555C1H8R7DA01D The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GR M 02 2 5C 1C q w e r t y 7R6 W u i < >: EIA [inch] Code D05 L o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 22 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 9.1pF(9R1) 9.2pF(9R2) 9.3pF(9R3) 9.4pF(9R4) 9.5pF(9R5) 9.6pF(9R6) 9.7pF(9R7) 9.8pF(9R8) 9.9pF(9R9) 0.05pF(W) GRM0225C1C8R8WD05L GRM0335C1H8R8WD01D GRM1555C1H8R8WA01D 0.1pF(B) GRM0225C1C8R8BD05L GRM0335C1H8R8BD01D GRM1555C1H8R8BA01D 0.25pF(C) GRM0225C1C8R8CD05L GRM0335C1H8R8CD01D GRM1555C1H8R8CA01D 0.5pF(D) GRM0225C1C8R8DD05L GRM0335C1H8R8DD01D GRM1555C1H8R8DA01D 0.05pF(W) GRM0225C1C8R9WD05L GRM0335C1H8R9WD01D GRM1555C1H8R9WA01D 0.1pF(B) GRM0225C1C8R9BD05L GRM0335C1H8R9BD01D GRM1555C1H8R9BA01D 0.25pF(C) GRM0225C1C8R9CD05L GRM0335C1H8R9CD01D GRM1555C1H8R9CA01D 0.5pF(D) GRM0225C1C8R9DD05L GRM0335C1H8R9DD01D GRM1555C1H8R9DA01D 0.05pF(W) GRM0225C1C9R0WD05L GRM0335C1H9R0WD01D GRM1555C1H9R0WA01D 0.1pF(B) GRM0225C1C9R0BD05L GRM0335C1H9R0BD01D GRM1555C1H9R0BA01D 0.25pF(C) GRM0225C1C9R0CD05L GRM0335C1H9R0CD01D GRM1555C1H9R0CA01D 0.5pF(D) GRM0225C1C9R0DD05L GRM0335C1H9R0DD01D GRM1555C1H9R0DA01D 0.05pF(W) GRM0225C1C9R1WD05L GRM0335C1H9R1WD01D GRM1555C1H9R1WA01D 0.1pF(B) GRM0225C1C9R1BD05L GRM0335C1H9R1BD01D GRM1555C1H9R1BA01D 0.25pF(C) GRM0225C1C9R1CD05L GRM0335C1H9R1CD01D GRM1555C1H9R1CA01D 0.5pF(D) GRM0225C1C9R1DD05L GRM0335C1H9R1DD01D GRM1555C1H9R1DA01D 0.05pF(W) GRM0225C1C9R2WD05L GRM0335C1H9R2WD01D GRM1555C1H9R2WA01D 0.1pF(B) GRM0225C1C9R2BD05L GRM0335C1H9R2BD01D GRM1555C1H9R2BA01D 0.25pF(C) GRM0225C1C9R2CD05L GRM0335C1H9R2CD01D GRM1555C1H9R2CA01D 0.5pF(D) GRM0225C1C9R2DD05L GRM0335C1H9R2DD01D GRM1555C1H9R2DA01D 0.05pF(W) GRM0225C1C9R3WD05L GRM0335C1H9R3WD01D GRM1555C1H9R3WA01D 0.1pF(B) GRM0225C1C9R3BD05L GRM0335C1H9R3BD01D GRM1555C1H9R3BA01D 0.25pF(C) GRM0225C1C9R3CD05L GRM0335C1H9R3CD01D GRM1555C1H9R3CA01D 0.5pF(D) GRM0225C1C9R3DD05L GRM0335C1H9R3DD01D GRM1555C1H9R3DA01D 0.05pF(W) GRM0225C1C9R4WD05L GRM0335C1H9R4WD01D GRM1555C1H9R4WA01D 0.1pF(B) GRM0225C1C9R4BD05L GRM0335C1H9R4BD01D GRM1555C1H9R4BA01D 0.25pF(C) GRM0225C1C9R4CD05L GRM0335C1H9R4CD01D GRM1555C1H9R4CA01D 0.5pF(D) GRM0225C1C9R4DD05L GRM0335C1H9R4DD01D GRM1555C1H9R4DA01D 0.05pF(W) GRM0225C1C9R5WD05L GRM0335C1H9R5WD01D GRM1555C1H9R5WA01D 0.1pF(B) GRM0225C1C9R5BD05L GRM0335C1H9R5BD01D GRM1555C1H9R5BA01D 0.25pF(C) GRM0225C1C9R5CD05L GRM0335C1H9R5CD01D GRM1555C1H9R5CA01D 0.5pF(D) GRM0225C1C9R5DD05L GRM0335C1H9R5DD01D GRM1555C1H9R5DA01D 0.05pF(W) GRM0225C1C9R6WD05L GRM0335C1H9R6WD01D GRM1555C1H9R6WA01D 0.1pF(B) GRM0225C1C9R6BD05L GRM0335C1H9R6BD01D GRM1555C1H9R6BA01D 0.25pF(C) GRM0225C1C9R6CD05L GRM0335C1H9R6CD01D GRM1555C1H9R6CA01D 0.5pF(D) GRM0225C1C9R6DD05L GRM0335C1H9R6DD01D GRM1555C1H9R6DA01D 0.05pF(W) GRM0225C1C9R7WD05L GRM0335C1H9R7WD01D GRM1555C1H9R7WA01D 0.1pF(B) GRM0225C1C9R7BD05L GRM0335C1H9R7BD01D GRM1555C1H9R7BA01D 0.25pF(C) GRM0225C1C9R7CD05L GRM0335C1H9R7CD01D GRM1555C1H9R7CA01D 0.5pF(D) GRM0225C1C9R7DD05L GRM0335C1H9R7DD01D GRM1555C1H9R7DA01D 0.05pF(W) GRM0225C1C9R8WD05L GRM0335C1H9R8WD01D GRM1555C1H9R8WA01D 0.1pF(B) GRM0225C1C9R8BD05L GRM0335C1H9R8BD01D GRM1555C1H9R8BA01D 0.25pF(C) GRM0225C1C9R8CD05L GRM0335C1H9R8CD01D GRM1555C1H9R8CA01D 0.5pF(D) GRM0225C1C9R8DD05L GRM0335C1H9R8DD01D GRM1555C1H9R8DA01D 0.05pF(W) GRM0225C1C9R9WD05L GRM0335C1H9R9WD01D GRM1555C1H9R9WA01D 0.1pF(B) GRM0225C1C9R9BD05L GRM0335C1H9R9BD01D GRM1555C1H9R9BA01D 0.25pF(C) GRM0225C1C9R9CD05L GRM0335C1H9R9CD01D GRM1555C1H9R9CA01D 0.5pF(D) GRM0225C1C9R9DD05L GRM0335C1H9R9DD01D GRM1555C1H9R9DA01D The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series Part Number Low ESL LLp Series 9.0pF(9R0) 50(1H) Tolerance High-Q GJM Series 8.9pF(8R9) 1.0x0.5(15)<0402> 50(1H) High Frequency GQM Series 8.8pF(8R8) 0.6x0.3(03)<0201> 16(1C) Monolithic Microchip GMA Series Capacitance 0.4x0.2(02)<01005> For Bonding GMD Series Rated Volt. [Vdc] Product Information LxW [mm] For General GRM Series Temperature Compensating Type C0G(5C) Characteristics < >: EIA [inch] Code 23 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 0.4x0.2(02)<01005> LxW [mm] 16(1C) Rated Volt. [Vdc] Capacitance Tolerance Array GNM Series Low ESL LLp Series 50(1H) Part Number GRM0225C1C100GD05L 5%(J) GRM0225C1C100JD05L GRM0335C1H100JD01D 12pF(120) 2%(G) GRM0225C1C120GD05L GRM0335C1H120GD01D 5%(J) GRM0225C1C120JD05L GRM0335C1H120JD01D 15pF(150) 2%(G) GRM0225C1C150GD05L GRM0335C1H150GD01D 5%(J) GRM0225C1C150JD05L GRM0335C1H150JD01D 18pF(180) 2%(G) GRM0225C1C180GD05L GRM0335C1H180GD01D 5%(J) GRM0225C1C180JD05L GRM0335C1H180JD01D 22pF(220) 2%(G) GRM0225C1C220GD05L GRM0335C1H220GD01D 5%(J) GRM0225C1C220JD05L GRM0335C1H220JD01D 2%(G) GRM0225C1C270GD05L GRM0335C1H270GD01D 5%(J) GRM0225C1C270JD05L GRM0335C1H270JD01D 33pF(330) 2%(G) GRM0225C1C330GD05L GRM0335C1H330GD01D 5%(J) GRM0225C1C330JD05L GRM0335C1H330JD01D 39pF(390) 2%(G) GRM0225C1C390GD05L GRM0335C1H390GD01D 5%(J) GRM0225C1C390JD05L GRM0335C1H390JD01D 2%(G) GRM0225C1C470GD05L GRM0335C1H470GD01D 5%(J) GRM0225C1C470JD05L 27pF(270) 47pF(470) High-Q GJM Series 6.3(0J) 2%(G) 10pF(100) GRM0335C1H100GD01D GRM0335C1H470JD01D 56pF(560) 2%(G) 5%(J) GRM0225C1A560JD05L GRM0225C0J560JD05L GRM0335C1H560JD01D 68pF(680) 2%(G) GRM0225C1A680GD05L GRM0225C0J680GD05L GRM0335C1H680GD01D 5%(J) GRM0225C1A680JD05L GRM0225C0J680JD05L GRM0335C1H680JD01D 82pF(820) 2%(G) GRM0225C1A820GD05L GRM0225C0J820GD05L GRM0335C1H820GD01D 5%(J) GRM0225C1A820JD05L GRM0225C0J820JD05L GRM0335C1H820JD01D 100pF(101) 2%(G) GRM0225C1A101GD05L GRM0225C0J101GD05L GRM0335C1H101GD01D 5%(J) GRM0225C1A101JD05L GRM0225C0J101JD05L GRM0335C1H101JD01D GRM0225C1A560GD05L The part number code is shown in ( ) and Unit is shown in [ ]. GRM0225C0J560GD05L GRM0335C1H560GD01D < >: EIA [inch] Code Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series 0.6x0.3(03)<0201> 10(1A) (Part Number) GR M 02 2 5C 1C q w e r t y 100 G u i D05 L o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 24 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Temperature Compensating Type C0G(5C) Characteristics 1.0x0.5(15)<0402> LxW [mm] 50(1H) Rated Volt. [Vdc] C0G(5C) Part Number 2%(G) 5%(J) GRM1555C1H100JA01D 12pF(120) 2%(G) GRM1555C1H120GA01D 5%(J) GRM1555C1H120JA01D 15pF(150) 2%(G) GRM1555C1H150GA01D 5%(J) GRM1555C1H150JA01D 18pF(180) 2%(G) GRM1555C1H180GA01D 5%(J) GRM1555C1H180JA01D 22pF(220) 2%(G) GRM1555C1H220GA01D 5%(J) GRM1555C1H220JA01D 2%(G) GRM1555C1H270GA01D 2%(G) GRM1555C1H330GA01D 5%(J) GRM1555C1H330JA01D 39pF(390) 2%(G) GRM1555C1H390GA01D 5%(J) GRM1555C1H390JA01D 2%(G) GRM1555C1H470GA01D 47pF(470) 5%(J) GRM1555C1H470JA01D 56pF(560) 2%(G) GRM1555C1H560GA01D 5%(J) GRM1555C1H560JA01D 68pF(680) 2%(G) GRM1555C1H680GA01D 5%(J) GRM1555C1H680JA01D 82pF(820) 2%(G) GRM1555C1H820GA01D 5%(J) GRM1555C1H820JA01D 100pF(101) 2%(G) GRM1555C1H101GA01D 5%(J) GRM1555C1H101JA01D 2%(G) GRM1555C1H121GA01D 120pF(121) 5%(J) GRM1555C1H121JA01D 150pF(151) 2%(G) GRM1555C1H151GA01D 5%(J) GRM1555C1H151JA01D 180pF(181) 2%(G) GRM1555C1H181GA01D 5%(J) GRM1555C1H181JA01D 220pF(221) 2%(G) GRM1555C1H221GA01D 5%(J) GRM1555C1H221JA01D 270pF(271) 2%(G) GRM1555C1H271GA01D 5%(J) GRM1555C1H271JA01D 330pF(331) 2%(G) GRM1555C1H331GA01D 5%(J) GRM1555C1H331JA01D 390pF(391) 2%(G) GRM1555C1H391GA01D 5%(J) GRM1555C1H391JA01D 470pF(471) 2%(G) GRM1555C1H471GA01D 5%(J) GRM1555C1H471JA01D 2%(G) GRM1555C1H561GA01D 560pF(561) 5%(J) GRM1555C1H561JA01D 680pF(681) 2%(G) GRM1555C1H681GA01D 5%(J) GRM1555C1H681JA01D 820pF(821) 2%(G) GRM1555C1H821GA01D 5%(J) GRM1555C1H821JA01D 1000pF(102) 2%(G) GRM1555C1H102GA01D 5%(J) GRM1555C1H102JA01D The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series Low ESL LLp Series GRM1555C1H270JA01D 33pF(330) High-Q GJM Series 5%(J) High Frequency GQM Series 27pF(270) GRM1555C1H100GA01D Monolithic Microchip GMA Series Tolerance 10pF(100) For Bonding GMD Series Capacitance Product Information TC < >: EIA [inch] Code 25 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 1.6x0.8(18)<0603> LxW [mm] High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series Capacitance Tolerance 50(1H) Part Number 10pF(100) 5%(J) GRM1885C2A100JA01D GRM1885C1H100JA01D 12pF(120) 5%(J) GRM1885C2A120JA01D GRM1885C1H120JA01D 15pF(150) 5%(J) GRM1885C2A150JA01D GRM1885C1H150JA01D 18pF(180) 5%(J) GRM1885C2A180JA01D GRM1885C1H180JA01D 22pF(220) 5%(J) GRM1885C2A220JA01D GRM1885C1H220JA01D 27pF(270) 5%(J) GRM1885C2A270JA01D GRM1885C1H270JA01D 33pF(330) 5%(J) GRM1885C2A330JA01D GRM1885C1H330JA01D 39pF(390) 5%(J) GRM1885C2A390JA01D GRM1885C1H390JA01D 47pF(470) 5%(J) GRM1885C2A470JA01D GRM1885C1H470JA01D 56pF(560) 5%(J) GRM1885C2A560JA01D GRM1885C1H560JA01D 68pF(680) 5%(J) GRM1885C2A680JA01D GRM1885C1H680JA01D 82pF(820) 5%(J) GRM1885C2A820JA01D GRM1885C1H820JA01D 100pF(101) 5%(J) GRM1885C2A101JA01D GRM1885C1H101JA01D 120pF(121) 5%(J) GRM1885C2A121JA01D GRM1885C1H121JA01D 150pF(151) 5%(J) GRM1885C2A151JA01D GRM1885C1H151JA01D 180pF(181) 5%(J) GRM1885C2A181JA01D GRM1885C1H181JA01D 220pF(221) 5%(J) GRM1885C2A221JA01D GRM1885C1H221JA01D 270pF(271) 5%(J) GRM1885C2A271JA01D GRM1885C1H271JA01D 330pF(331) 5%(J) GRM1885C2A331JA01D GRM1885C1H331JA01D 390pF(391) 5%(J) GRM1885C2A391JA01D GRM1885C1H391JA01D 470pF(471) 5%(J) GRM1885C2A471JA01D GRM1885C1H471JA01D 560pF(561) 5%(J) GRM1885C2A561JA01D GRM1885C1H561JA01D 680pF(681) 5%(J) GRM1885C2A681JA01D GRM1885C1H681JA01D 820pF(821) 5%(J) GRM1885C2A821JA01D GRM1885C1H821JA01D 1000pF(102) 5%(J) GRM1885C2A102JA01D GRM1885C1H102JA01D 1200pF(122) 5%(J) GRM1885C2A122JA01D GRM1885C1H122JA01D 1500pF(152) 5%(J) GRM1885C2A152JA01D GRM1885C1H152JA01D 1800pF(182) 5%(J) GRM1885C1H182JA01D 2200pF(222) 5%(J) GRM1885C1H222JA01D 2700pF(272) 5%(J) GRM1885C1H272JA01D 3300pF(332) 5%(J) GRM1885C1H332JA01D 3900pF(392) 5%(J) GRM1885C1H392JA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Product Information For Bonding GMD Series Monolithic Microchip GMA Series 100(2A) Rated Volt. [Vdc] (Part Number) GR M 18 8 5C 2A q w e r t y 100 J u i A01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 26 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2.0x1.25(21)<0805> LxW [mm] 100(2A) Tolerance 100(2A) 50(1H) Part Number 5%(J) GRM2165C2A101JA01D 120pF(121) 5%(J) GRM2165C2A121JA01D 150pF(151) 5%(J) GRM2165C2A151JA01D 180pF(181) 5%(J) GRM2165C2A181JA01D 220pF(221) 5%(J) GRM2165C2A221JA01D 270pF(271) 5%(J) GRM2165C2A271JA01D 330pF(331) 5%(J) GRM2165C2A331JA01D 390pF(391) 5%(J) GRM2165C2A391JA01D 470pF(471) 5%(J) GRM2165C2A471JA01D 560pF(561) 5%(J) GRM2165C2A561JA01D 680pF(681) 5%(J) GRM2165C2A681JA01D 820pF(821) 5%(J) GRM2165C2A821JA01D 1000pF(102) 5%(J) GRM2165C2A102JA01D 1200pF(122) 5%(J) GRM2165C2A122JA01D GRM2165C1H122JA01D 1500pF(152) 5%(J) GRM2165C2A152JA01D GRM2165C1H152JA01D 1800pF(182) 5%(J) GRM2165C2A182JA01D GRM2165C1H182JA01D GRM3195C2A182JA01D 2200pF(222) 5%(J) GRM2165C2A222JA01D GRM2165C1H222JA01D GRM3195C2A222JA01D 2700pF(272) 5%(J) GRM2165C2A272JA01D GRM2165C1H272JA01D GRM3195C2A272JA01D 3300pF(332) 5%(J) GRM2165C2A332JA01D GRM2165C1H332JA01D GRM3195C2A332JA01D 3900pF(392) 5%(J) GRM2165C1H392JA01D GRM3195C2A392JA01D 4700pF(472) 5%(J) GRM2165C1H472JA01D GRM3195C2A472JA01D GRM3195C1H472JA01D 5600pF(562) 5%(J) GRM2195C1H562JA01D GRM3195C2A562JA01D GRM3195C1H562JA01D 6800pF(682) 5%(J) GRM2195C1H682JA01D GRM3195C2A682JA01D GRM3195C1H682JA01D 8200pF(822) 5%(J) GRM2195C1H822JA01D GRM3195C2A822JA01D GRM3195C1H822JA01D 10000pF(103) 5%(J) GRM2195C1H103JA01D GRM3195C2A103JA01D GRM3195C1H103JA01D 12000pF(123) 5%(J) GRM2195C1H123JA01D GRM3195C2A123JA01D GRM3195C1H123JA01D 15000pF(153) 5%(J) GRM2195C1H153JA01D GRM3195C2A153JA01D GRM3195C1H153JA01D 18000pF(183) 5%(J) GRM21B5C1H183JA01L GRM3195C2A183JA01D GRM3195C1H183JA01D 22000pF(223) 5%(J) GRM21B5C1H223JA01L GRM3195C2A223JA01D GRM3195C1H223JA01D 27000pF(273) 5%(J) GRM3195C1H273JA01D 33000pF(333) 5%(J) GRM3195C1H333JA01D 39000pF(393) 5%(J) GRM3195C1H393JA01D 47000pF(473) 5%(J) GRM31M5C1H473JA01L 56000pF(563) 5%(J) GRM31M5C1H563JA01L 68000pF(683) 5%(J) GRM31C5C1H683JA01L 82000pF(823) 5%(J) GRM31C5C1H823JA01L 100000pF(104) 5%(J) GRM31C5C1H104JA01L Low ESL LLp Series High-Q GJM Series For Bonding GMD Series < >: EIA [inch] Code Product Information The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series 100pF(101) High Frequency GQM Series Capacitance 3.2x1.6(31)<1206> 50(1H) Monolithic Microchip GMA Series Rated Volt. [Vdc] For General GRM Series Temperature Compensating Type C0G(5C) Characteristics 27 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics-Low Profile 50(1H) Rated Volt. [Vdc] For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series Capacitance Product Information LxW [mm] 1.0x0.5(15)<0402> LxW [mm] Tolerance Capacitance Part Number 50(1H) Tolerance Part Number 0.1pF(R10) 0.1pF(B) GRM1535C1HR10BDD5D 4.9pF(4R9) 0.25pF(C) GRM1535C1H4R9CDD5D 0.2pF(R20) 0.1pF(B) GRM1535C1HR20BDD5D 5.0pF(5R0) 0.25pF(C) GRM1535C1H5R0CDD5D 0.3pF(R30) 0.1pF(B) GRM1535C1HR30BDD5D 5.1pF(5R1) 0.5pF(D) GRM1535C1H5R1DDD5D 0.4pF(R40) 0.1pF(B) GRM1535C1HR40BDD5D 5.2pF(5R2) 0.5pF(D) GRM1535C1H5R2DDD5D 0.5pF(R50) 0.1pF(B) GRM1535C1HR50BDD5D 5.3pF(5R3) 0.5pF(D) GRM1535C1H5R3DDD5D 0.6pF(R60) 0.1pF(B) GRM1535C1HR60BDD5D 5.4pF(5R4) 0.5pF(D) GRM1535C1H5R4DDD5D 0.7pF(R70) 0.1pF(B) GRM1535C1HR70BDD5D 5.5pF(5R5) 0.5pF(D) GRM1535C1H5R5DDD5D 0.8pF(R80) 0.1pF(B) GRM1535C1HR80BDD5D 5.6pF(5R6) 0.5pF(D) GRM1535C1H5R6DDD5D 0.9pF(R90) 0.1pF(B) GRM1535C1HR90BDD5D 5.7pF(5R7) 0.5pF(D) GRM1535C1H5R7DDD5D 1.0pF(1R0) 0.25pF(C) GRM1535C1H1R0CDD5D 5.8pF(5R8) 0.5pF(D) GRM1535C1H5R8DDD5D 1.1pF(1R1) 0.25pF(C) GRM1535C1H1R1CDD5D 5.9pF(5R9) 0.5pF(D) GRM1535C1H5R9DDD5D 1.2pF(1R2) 0.25pF(C) GRM1535C1H1R2CDD5D 6.0pF(6R0) 0.5pF(D) GRM1535C1H6R0DDD5D 1.3pF(1R3) 0.25pF(C) GRM1535C1H1R3CDD5D 6.1pF(6R1) 0.5pF(D) GRM1535C1H6R1DDD5D 1.4pF(1R4) 0.25pF(C) GRM1535C1H1R4CDD5D 6.2pF(6R2) 0.5pF(D) GRM1535C1H6R2DDD5D 1.5pF(1R5) 0.25pF(C) GRM1535C1H1R5CDD5D 6.3pF(6R3) 0.5pF(D) GRM1535C1H6R3DDD5D 1.6pF(1R6) 0.25pF(C) GRM1535C1H1R6CDD5D 6.4pF(6R4) 0.5pF(D) GRM1535C1H6R4DDD5D 1.7pF(1R7) 0.25pF(C) GRM1535C1H1R7CDD5D 6.5pF(6R5) 0.5pF(D) GRM1535C1H6R5DDD5D 1.8pF(1R8) 0.25pF(C) GRM1535C1H1R8CDD5D 6.6pF(6R6) 0.5pF(D) GRM1535C1H6R6DDD5D 1.9pF(1R9) 0.25pF(C) GRM1535C1H1R9CDD5D 6.7pF(6R7) 0.5pF(D) GRM1535C1H6R7DDD5D 2.0pF(2R0) 0.25pF(C) GRM1535C1H2R0CDD5D 6.8pF(6R8) 0.5pF(D) GRM1535C1H6R8DDD5D 2.1pF(2R1) 0.25pF(C) GRM1535C1H2R1CDD5D 6.9pF(6R9) 0.5pF(D) GRM1535C1H6R9DDD5D 2.2pF(2R2) 0.25pF(C) GRM1535C1H2R2CDD5D 7.0pF(7R0) 0.5pF(D) GRM1535C1H7R0DDD5D 2.3pF(2R3) 0.25pF(C) GRM1535C1H2R3CDD5D 7.1pF(7R1) 0.5pF(D) GRM1535C1H7R1DDD5D 2.4pF(2R4) 0.25pF(C) GRM1535C1H2R4CDD5D 7.2pF(7R2) 0.5pF(D) GRM1535C1H7R2DDD5D 2.5pF(2R5) 0.25pF(C) GRM1535C1H2R5CDD5D 7.3pF(7R3) 0.5pF(D) GRM1535C1H7R3DDD5D 2.6pF(2R6) 0.25pF(C) GRM1535C1H2R6CDD5D 7.4pF(7R4) 0.5pF(D) GRM1535C1H7R4DDD5D 2.7pF(2R7) 0.25pF(C) GRM1535C1H2R7CDD5D 7.5pF(7R5) 0.5pF(D) GRM1535C1H7R5DDD5D 2.8pF(2R8) 0.25pF(C) GRM1535C1H2R8CDD5D 7.6pF(7R6) 0.5pF(D) GRM1535C1H7R6DDD5D 2.9pF(2R9) 0.25pF(C) GRM1535C1H2R9CDD5D 7.7pF(7R7) 0.5pF(D) GRM1535C1H7R7DDD5D 3.0pF(3R0) 0.25pF(C) GRM1535C1H3R0CDD5D 7.8pF(7R8) 0.5pF(D) GRM1535C1H7R8DDD5D 3.1pF(3R1) 0.25pF(C) GRM1535C1H3R1CDD5D 7.9pF(7R9) 0.5pF(D) GRM1535C1H7R9DDD5D 3.2pF(3R2) 0.25pF(C) GRM1535C1H3R2CDD5D 8.0pF(8R0) 0.5pF(D) GRM1535C1H8R0DDD5D 3.3pF(3R3) 0.25pF(C) GRM1535C1H3R3CDD5D 8.1pF(8R1) 0.5pF(D) GRM1535C1H8R1DDD5D 3.4pF(3R4) 0.25pF(C) GRM1535C1H3R4CDD5D 8.2pF(8R2) 0.5pF(D) GRM1535C1H8R2DDD5D 3.5pF(3R5) 0.25pF(C) GRM1535C1H3R5CDD5D 8.3pF(8R3) 0.5pF(D) GRM1535C1H8R3DDD5D 3.6pF(3R6) 0.25pF(C) GRM1535C1H3R6CDD5D 8.4pF(8R4) 0.5pF(D) GRM1535C1H8R4DDD5D 3.7pF(3R7) 0.25pF(C) GRM1535C1H3R7CDD5D 8.5pF(8R5) 0.5pF(D) GRM1535C1H8R5DDD5D 3.8pF(3R8) 0.25pF(C) GRM1535C1H3R8CDD5D 8.6pF(8R6) 0.5pF(D) GRM1535C1H8R6DDD5D 3.9pF(3R9) 0.25pF(C) GRM1535C1H3R9CDD5D 8.7pF(8R7) 0.5pF(D) GRM1535C1H8R7DDD5D 4.0pF(4R0) 0.25pF(C) GRM1535C1H4R0CDD5D 8.8pF(8R8) 0.5pF(D) GRM1535C1H8R8DDD5D 4.1pF(4R1) 0.25pF(C) GRM1535C1H4R1CDD5D 8.9pF(8R9) 0.5pF(D) GRM1535C1H8R9DDD5D 4.2pF(4R2) 0.25pF(C) GRM1535C1H4R2CDD5D 9.0pF(9R0) 0.5pF(D) GRM1535C1H9R0DDD5D 4.3pF(4R3) 0.25pF(C) GRM1535C1H4R3CDD5D 9.1pF(9R1) 0.5pF(D) GRM1535C1H9R1DDD5D 4.4pF(4R4) 0.25pF(C) GRM1535C1H4R4CDD5D 9.2pF(9R2) 0.5pF(D) GRM1535C1H9R2DDD5D 4.5pF(4R5) 0.25pF(C) GRM1535C1H4R5CDD5D 9.3pF(9R3) 0.5pF(D) GRM1535C1H9R3DDD5D 4.6pF(4R6) 0.25pF(C) GRM1535C1H4R6CDD5D 9.4pF(9R4) 0.5pF(D) GRM1535C1H9R4DDD5D 4.7pF(4R7) 0.25pF(C) GRM1535C1H4R7CDD5D 9.5pF(9R5) 0.5pF(D) GRM1535C1H9R5DDD5D 4.8pF(4R8) 0.25pF(C) GRM1535C1H4R8CDD5D 9.6pF(9R6) 0.5pF(D) GRM1535C1H9R6DDD5D The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GR M 15 3 5C 1H q w e r t y R10 B u i < >: EIA [inch] Code DD5 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 28 1.0x0.5(15)<0402> Rated Volt. [Vdc] qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1.0x0.5(15)<0402> LxW [mm] 50(1H) GRM1535C1H9R8DDD5D 9.9pF(9R9) 0.5pF(D) GRM1535C1H9R9DDD5D 10pF(100) 5%(J) GRM1535C1H100JDD5D 12pF(120) 5%(J) GRM1535C1H120JDD5D 15pF(150) 5%(J) GRM1535C1H150JDD5D 18pF(180) 5%(J) GRM1535C1H180JDD5D 22pF(220) 5%(J) GRM1535C1H220JDD5D 27pF(270) 5%(J) GRM1535C1H270JDD5D 33pF(330) 5%(J) GRM1535C1H330JDD5D 39pF(390) 5%(J) GRM1535C1H390JDD5D 47pF(470) 5%(J) GRM1535C1H470JDD5D 56pF(560) 5%(J) GRM1535C1H560JDD5D 68pF(680) 5%(J) GRM1535C1H680JDD5D 82pF(820) 5%(J) GRM1535C1H820JDD5D 100pF(101) 5%(J) GRM1535C1H101JDD5D 120pF(121) 5%(J) GRM1535C1H121JDD5D 150pF(151) 5%(J) GRM1535C1H151JDD5D 180pF(181) 5%(J) GRM1535C1H181JDD5D 220pF(221) 5%(J) GRM1535C1H221JDD5D 270pF(271) 5%(J) GRM1535C1H271JDD5D 330pF(331) 5%(J) GRM1535C1H331JDD5D 390pF(391) 5%(J) GRM1535C1H391JDD5D 470pF(471) 5%(J) GRM1535C1H471JDD5D 560pF(561) 5%(J) GRM1535C1H561JDD5D 680pF(681) 5%(J) GRM1535C1H681JDD5D < >: EIA [inch] Code Monolithic Microchip GMA Series The part number code is shown in ( ) and Unit is shown in [ ]. Low ESL LLp Series GRM1535C1H9R7DDD5D 0.5pF(D) High-Q GJM Series 0.5pF(D) 9.8pF(9R8) High Frequency GQM Series 9.7pF(9R7) Array GNM Series Part Number For Bonding GMD Series Tolerance Product Information Rated Volt. [Vdc] Capacitance For General GRM Series Temperature Compensating Type C0G(5C) Characteristics-Low Profile 29 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics-Low Profile 2.0x1.25(21)<0805> LxW [mm] High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series Capacitance 3.2x1.6(31)<1206> 50(1H) Tolerance 100(2A) 50(1H) Part Number 100pF(101) 5%(J) GRM2165C2A101JA01D 120pF(121) 5%(J) GRM2165C2A121JA01D 150pF(151) 5%(J) GRM2165C2A151JA01D 180pF(181) 5%(J) GRM2165C2A181JA01D 220pF(221) 5%(J) GRM2165C2A221JA01D 270pF(271) 5%(J) GRM2165C2A271JA01D 330pF(331) 5%(J) GRM2165C2A331JA01D 390pF(391) 5%(J) GRM2165C2A391JA01D 470pF(471) 5%(J) GRM2165C2A471JA01D 560pF(561) 5%(J) GRM2165C2A561JA01D 680pF(681) 5%(J) GRM2165C2A681JA01D 820pF(821) 5%(J) GRM2165C2A821JA01D 1000pF(102) 5%(J) GRM2165C2A102JA01D 1200pF(122) 5%(J) GRM2165C2A122JA01D GRM2165C1H122JA01D 1500pF(152) 5%(J) GRM2165C2A152JA01D GRM2165C1H152JA01D 1800pF(182) 5%(J) GRM2165C2A182JA01D GRM2165C1H182JA01D GRM3195C2A182JA01D 2200pF(222) 5%(J) GRM2165C2A222JA01D GRM2165C1H222JA01D GRM3195C2A222JA01D 2700pF(272) 5%(J) GRM2165C2A272JA01D GRM2165C1H272JA01D GRM3195C2A272JA01D 3300pF(332) 5%(J) GRM2165C2A332JA01D GRM2165C1H332JA01D GRM3195C2A332JA01D 3900pF(392) 5%(J) GRM2165C1H392JA01D GRM3195C2A392JA01D 4700pF(472) 5%(J) GRM2165C1H472JA01D GRM3195C2A472JA01D GRM3195C1H472JA01D 5600pF(562) 5%(J) GRM2195C1H562JA01D GRM3195C2A562JA01D GRM3195C1H562JA01D 6800pF(682) 5%(J) GRM2195C1H682JA01D GRM3195C2A682JA01D GRM3195C1H682JA01D 8200pF(822) 5%(J) GRM2195C1H822JA01D GRM3195C2A822JA01D GRM3195C1H822JA01D 10000pF(103) 5%(J) GRM2195C1H103JA01D GRM3195C2A103JA01D GRM3195C1H103JA01D 12000pF(123) 5%(J) GRM2195C1H123JA01D GRM3195C1H123JA01D 15000pF(153) 5%(J) GRM2195C1H153JA01D GRM3195C1H153JA01D 18000pF(183) 5%(J) GRM3195C1H183JA01D 22000pF(223) 5%(J) GRM3195C1H223JA01D 27000pF(273) 5%(J) GRM3195C1H273JA01D 33000pF(333) 5%(J) GRM3195C1H333JA01D 39000pF(393) 5%(J) GRM3195C1H393JA01D 47000pF(473) 5%(J) GRM31M5C1H473JA01L 56000pF(563) 5%(J) GRM31M5C1H563JA01L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Product Information For Bonding GMD Series Monolithic Microchip GMA Series 100(2A) Rated Volt. [Vdc] (Part Number) GR M 21 6 5C 2A q w e r t y 101 J u i A01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 30 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 0.6x0.3(03)<0201> LxW [mm] 50(1H) Tolerance 50(1H) 10(1A) Part Number 0.25pF(C) GRM0337U1H1R0CD01D GRM1557U1H1R0CZ01D 2.0pF(2R0) 0.25pF(C) GRM0337U1H2R0CD01D GRM1557U1H2R0CZ01D 3.0pF(3R0) 0.25pF(C) GRM0337U1H3R0CD01D GRM1557U1H3R0CZ01D 4.0pF(4R0) 0.25pF(C) GRM0337U1H4R0CD01D GRM1557U1H4R0CZ01D 5.0pF(5R0) 0.25pF(C) GRM0337U1H5R0CD01D GRM1557U1H5R0CZ01D 6.0pF(6R0) 0.5pF(D) GRM0337U1H6R0DD01D GRM1557U1H6R0DZ01D 7.0pF(7R0) 0.5pF(D) GRM0337U1H7R0DD01D GRM1557U1H7R0DZ01D 8.0pF(8R0) 0.5pF(D) GRM0337U1H8R0DD01D GRM1557U1H8R0DZ01D 9.0pF(9R0) 0.5pF(D) GRM0337U1H9R0DD01D GRM1557U1H9R0DZ01D 10pF(100) 5%(J) GRM0337U1H100JD01D GRM1557U1H100JZ01D 12pF(120) 5%(J) GRM0337U1H120JD01D GRM1557U1H120JZ01D 15pF(150) 5%(J) GRM0337U1H150JD01D 18pF(180) 5%(J) GRM0337U1E180JD01D GRM1557U1H180JZ01D 22pF(220) 5%(J) GRM0337U1E220JD01D GRM1557U1H220JZ01D 27pF(270) 5%(J) GRM0337U1E270JD01D GRM1557U1H270JZ01D 33pF(330) 5%(J) GRM0337U1E330JD01D GRM1557U1H330JZ01D 39pF(390) 5%(J) GRM0337U1E390JD01D GRM1557U1H390JZ01D 47pF(470) 5%(J) GRM0337U1E470JD01D GRM1557U1H470JZ01D 56pF(560) 5%(J) GRM0337U1E560JD01D GRM1557U1H560JZ01D 68pF(680) 5%(J) GRM0337U1E680JD01D GRM1557U1H680JZ01D 82pF(820) 5%(J) GRM0337U1E820JD01D GRM1557U1H820JZ01D 100pF(101) 5%(J) GRM0337U1E101JD01D GRM1557U1H101JZ01D 120pF(121) 5%(J) GRM1557U1H121JZ01D 150pF(151) 5%(J) GRM1557U1H151JZ01D 180pF(181) 5%(J) GRM1557U1H181JZ01D 1200pF(122) 5%(J) GRM1557U1A122JA01D 1500pF(152) 5%(J) GRM1557U1A152JA01D 1800pF(182) 5%(J) GRM1557U1A182JA01D 2200pF(222) 5%(J) GRM1557U1A222JA01D 2700pF(272) 5%(J) GRM1557U1A272JA01D 3300pF(332) 5%(J) GRM1557U1A332JA01D 3900pF(392) 5%(J) GRM1557U1A392JA01D 4700pF(472) 5%(J) Low ESL LLp Series High-Q GJM Series GRM1557U1H150JZ01D GRM1557U1A472JA01D For Bonding GMD Series < >: EIA [inch] Code Product Information The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series 1.0pF(1R0) High Frequency GQM Series Capacitance 1.0x0.5(15)<0402> 25(1E) Monolithic Microchip GMA Series Rated Volt. [Vdc] For General GRM Series Temperature Compensating Type U2J(7U) Characteristics 31 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type U2J(7U) Characteristics 1.6x0.8(18)<0603> LxW [mm] 10(1A) Tolerance Part Number 1000pF(102) 5%(J) GRM1887U1H102JA01D 1200pF(122) 5%(J) GRM1887U1H122JA01D 1500pF(152) 5%(J) GRM1887U1H152JA01D 1800pF(182) 5%(J) GRM1887U1H182JA01D 2200pF(222) 5%(J) GRM1887U1H222JA01D 2700pF(272) 5%(J) GRM1887U1H272JA01D 3300pF(332) 5%(J) GRM1887U1H332JA01D 3900pF(392) 5%(J) GRM1887U1H392JA01D 4700pF(472) 5%(J) GRM1887U1H472JA01D 5600pF(562) 5%(J) GRM1887U1H562JA01D 6800pF(682) 5%(J) GRM1887U1H682JA01D 8200pF(822) 5%(J) GRM1887U1H822JA01D 10000pF(103) 5%(J) GRM1887U1H103JA01D 12000pF(123) 5%(J) GRM1887U1A123JA01D 15000pF(153) 5%(J) GRM1887U1A153JA01D 18000pF(183) 5%(J) GRM1887U1A183JA01D 22000pF(223) 5%(J) GRM1887U1A223JA01D 2.0x1.25(21)<0805> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 3.2x1.6(31)<1206> 10(1A) Tolerance 50(1H) Part Number 10000pF(103) 5%(J) GRM2167U1H103JA01D 12000pF(123) 5%(J) GRM2167U1H123JA01D 15000pF(153) 5%(J) GRM2167U1H153JA01D 18000pF(183) 5%(J) GRM2167U1H183JA01D 22000pF(223) 5%(J) GRM2197U1H223JA01D 27000pF(273) 5%(J) GRM2197U1H273JA01D 33000pF(333) 5%(J) GRM21A7U1H333JA39L 39000pF(393) 5%(J) GRM21B7U1H393JA01L 47000pF(473) 5%(J) GRM21B7U1H473JA01L 56000pF(563) 5%(J) GRM2197U1A563JA01D GRM3197U1H563JA01D 68000pF(683) 5%(J) GRM21B7U1A683JA01L GRM31M7U1H683JA01L 82000pF(823) 5%(J) GRM21B7U1A823JA01L GRM31M7U1H823JA01L 100000pF(104) 5%(J) GRM21B7U1A104JA01L GRM31M7U1H104JA01L High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series Capacitance The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Product Information For Bonding GMD Series Monolithic Microchip GMA Series 50(1H) Rated Volt. [Vdc] (Part Number) GR M 18 8 7U 1H q w e r t y 102 J u i A01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 32 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1.6x0.8(18)<0603> LxW [mm] 50(1H) 10(1A) 2200pF(222) 5%(J) GRM1857U1H222JA44D 2700pF(272) 5%(J) GRM1857U1H272JA44D 3300pF(332) 5%(J) GRM1857U1H332JA44D 3900pF(392) 5%(J) GRM1857U1H392JA44D 4700pF(472) 5%(J) GRM1857U1H472JA44D 5600pF(562) 5%(J) GRM1857U1A562JA44D 6800pF(682) 5%(J) GRM1857U1A682JA44D 8200pF(822) 5%(J) GRM1857U1A822JA44D 10000pF(103) 5%(J) GRM1857U1A103JA44D 2.0x1.25(21)<0805> LxW [mm] 50(1H) 50(1H) Part Number 10000pF(103) 5%(J) GRM2167U1H103JA01D 12000pF(123) 5%(J) GRM2167U1H123JA01D 15000pF(153) 5%(J) GRM2167U1H153JA01D 18000pF(183) 5%(J) GRM2167U1H183JA01D 22000pF(223) 5%(J) GRM2197U1H223JA01D 27000pF(273) 5%(J) GRM2197U1H273JA01D 33000pF(333) 5%(J) GRM21A7U1H333JA39L 56000pF(563) 5%(J) 68000pF(683) 5%(J) GRM31M7U1H683JA01L 82000pF(823) 5%(J) GRM31M7U1H823JA01L 100000pF(104) 5%(J) GRM3197U1H563JA01D GRM31M7U1H104JA01L < >: EIA [inch] Code High Frequency GQM Series The part number code is shown in ( ) and Unit is shown in [ ]. GRM2197U1A563JA01D High-Q GJM Series Tolerance Monolithic Microchip GMA Series Capacitance 3.2x1.6(31)<1206> 10(1A) For Bonding GMD Series Rated Volt. [Vdc] Array GNM Series Part Number Low ESL LLp Series Tolerance Product Information Rated Volt. [Vdc] Capacitance For General GRM Series Temperature Compensating Type U2J(7U) Characteristics-Low Profile 33 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type P2H(6P), R2H(6R) Characteristics P2H TC LxW [mm] 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 50(1H) 25(1E) 50(1H) Rated Volt. [Vdc] High-Q GJM Series Low ESL LLp Series Array GNM Series Capacitance R2H 1.0x0.5(15)<0402> Tolerance Part Number 1.0pF(1R0) 0.25pF(C) GRM1556P1H1R0CZ01D GRM0336R1E1R0CD01D GRM1556R1H1R0CD01D 2.0pF(2R0) 0.25pF(C) GRM1556P1H2R0CZ01D GRM0336R1E2R0CD01D GRM1556R1H2R0CZ01D 3.0pF(3R0) 0.25pF(C) GRM1556P1H3R0CZ01D GRM0336R1E3R0CD01D GRM1556R1H3R0CZ01D 4.0pF(4R0) 0.25pF(C) GRM1556P1H4R0CZ01D GRM0336R1E4R0CD01D GRM1556R1H4R0CZ01D 5.0pF(5R0) 0.25pF(C) GRM1556P1H5R0CZ01D GRM0336R1E5R0CD01D GRM1556R1H5R0CZ01D 6.0pF(6R0) 0.5pF(D) GRM1556P1H6R0DZ01D GRM0336R1E6R0DD01D GRM1556R1H6R0DZ01D 7.0pF(7R0) 0.5pF(D) GRM1556P1H7R0DZ01D GRM0336R1E7R0DD01D GRM1556R1H7R0DZ01D 8.0pF(8R0) 0.5pF(D) GRM1556P1H8R0DZ01D GRM0336R1E8R0DD01D GRM1556R1H8R0DZ01D 9.0pF(9R0) 0.5pF(D) GRM1556P1H9R0DZ01D GRM0336R1E9R0DD01D GRM1556R1H9R0DZ01D 10pF(100) 5%(J) GRM1556P1H100JZ01D GRM0336R1E100JD01D GRM1556R1H100JZ01D 12pF(120) 5%(J) GRM1556P1H120JZ01D GRM0336R1E120JD01D GRM1556R1H120JZ01D 15pF(150) 5%(J) GRM1556P1H150JZ01D GRM0336R1E150JD01D GRM1556R1H150JZ01D 18pF(180) 5%(J) GRM1556P1H180JZ01D GRM0336R1E180JD01D GRM1556R1H180JZ01D 22pF(220) 5%(J) GRM1556P1H220JZ01D GRM0336R1E220JD01D GRM1556R1H220JZ01D 27pF(270) 5%(J) GRM1556P1H270JZ01D GRM0336R1E270JD01D GRM1556R1H270JZ01D 33pF(330) 5%(J) GRM0336R1E330JD01D GRM1556R1H330JZ01D 39pF(390) 5%(J) GRM0336R1E390JD01D 47pF(470) 5%(J) GRM0336R1E470JD01D 56pF(560) 5%(J) GRM0336R1E560JD01D 68pF(680) 5%(J) GRM0336R1E680JD01D 82pF(820) 5%(J) GRM0336R1E820JD01D 100pF(101) 5%(J) GRM0336R1E101JD01D < >: EIA [inch] Code Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GR M 15 5 6P 1H q w e r t y 1R0 C u i Z01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 34 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. S2H TC 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) 25(1E) 50(1H) Tolerance Part Number 1.0pF(1R0) 0.25pF(C) GRM0336S1E1R0CD01D GRM1556S1H1R0CD01D GRM0336T1E1R0CD01D GRM1556T1H1R0CD01D 2.0pF(2R0) 0.25pF(C) GRM0336S1E2R0CD01D GRM1556S1H2R0CZ01D GRM0336T1E2R0CD01D GRM1556T1H2R0CD01D 3.0pF(3R0) 0.25pF(C) GRM0336S1E3R0CD01D GRM1556S1H3R0CZ01D GRM0336T1E3R0CD01D GRM1556T1H3R0CD01D 4.0pF(4R0) 0.25pF(C) GRM0336S1E4R0CD01D GRM1556S1H4R0CZ01D GRM0336T1E4R0CD01D GRM1556T1H4R0CD01D 5.0pF(5R0) 0.25pF(C) GRM0336S1E5R0CD01D GRM1556S1H5R0CZ01D GRM0336T1E5R0CD01D GRM1556T1H5R0CD01D 6.0pF(6R0) 0.5pF(D) GRM0336S1E6R0DD01D GRM1556S1H6R0DZ01D GRM0336T1E6R0DD01D GRM1556T1H6R0DD01D 7.0pF(7R0) 0.5pF(D) GRM0336S1E7R0DD01D GRM1556S1H7R0DZ01D GRM0336T1E7R0DD01D GRM1556T1H7R0DD01D 8.0pF(8R0) 0.5pF(D) GRM0336S1E8R0DD01D GRM1556S1H8R0DZ01D GRM0336T1E8R0DD01D GRM1556T1H8R0DD01D 9.0pF(9R0) 0.5pF(D) GRM0336S1E9R0DD01D GRM1556S1H9R0DZ01D GRM0336T1E9R0DD01D GRM1556T1H9R0DD01D 10pF(100) 5%(J) GRM0336S1E100JD01D GRM1556S1H100JZ01D GRM0336T1E100JD01D GRM1556T1H100JD01D 12pF(120) 5%(J) GRM0336S1E120JD01D GRM1556S1H120JZ01D GRM0336T1E120JD01D GRM1556T1H120JD01D 15pF(150) 5%(J) GRM0336S1E150JD01D GRM1556S1H150JZ01D GRM0336T1E150JD01D GRM1556T1H150JD01D 18pF(180) 5%(J) GRM0336S1E180JD01D GRM1556S1H180JZ01D GRM0336T1E180JD01D GRM1556T1H180JD01D 22pF(220) 5%(J) GRM0336S1E220JD01D GRM1556S1H220JZ01D GRM0336T1E220JD01D GRM1556T1H220JD01D 27pF(270) 5%(J) GRM0336S1E270JD01D GRM1556S1H270JZ01D GRM0336T1E270JD01D GRM1556T1H270JD01D 33pF(330) 5%(J) GRM0336S1E330JD01D GRM1556S1H330JZ01D GRM0336T1E330JD01D GRM1556T1H330JD01D 39pF(390) 5%(J) GRM0336S1E390JD01D GRM1556S1H390JZ01D GRM0336T1E390JD01D GRM1556T1H390JD01D 47pF(470) 5%(J) GRM0336S1E470JD01D GRM0336T1E470JD01D GRM1556T1H470JD01D 56pF(560) 5%(J) GRM0336S1E560JD01D GRM0336T1E560JD01D GRM1556T1H560JD01D 68pF(680) 5%(J) GRM0336S1E680JD01D GRM0336T1E680JD01D GRM1556T1H680JD01D 82pF(820) 5%(J) GRM0336S1E820JD01D GRM0336T1E820JD01D GRM1556T1H820JD01D 100pF(101) 5%(J) GRM0336S1E101JD01D GRM0336T1E101JD01D GRM1556T1H101JD01D For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series < >: EIA [inch] Code Product Information The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series Capacitance 1.0x0.5(15)<0402> Low ESL LLp Series Rated Volt. [Vdc] T2H 0.6x0.3(03)<0201> High-Q GJM Series LxW [mm] For General GRM Series Temperature Compensating Type S2H(6S), T2H(6T) Characteristics 35 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X7R(R7) Characteristics 0.4x0.2(02)<01005> LxW [mm] 10(1A) Rated Volt. [Vdc] Array GNM Series Capacitance Tolerance Part Number 68pF(680) 10%(K) GRM022R71A680KA01L 100pF(101) 10%(K) GRM022R71A101KA01L 150pF(151) 10%(K) GRM022R71A151KA01L 220pF(221) 10%(K) GRM022R71A221KA01L 330pF(331) 10%(K) GRM022R71A331KA01L 470pF(471) 10%(K) GRM022R71A471KA01L 0.6x0.3(03)<0201> LxW [mm] 25(1E) Rated Volt. [Vdc] High-Q GJM Series Low ESL LLp Series Capacitance 16(1C) Tolerance 10(1A) 6.3(0J) Part Number 100pF(101) 10%(K) GRM033R71E101KA01D GRM033R71C101KA01D 150pF(151) 10%(K) GRM033R71E151KA01D GRM033R71C151KA01D 220pF(221) 10%(K) GRM033R71E221KA01D GRM033R71C221KA01D 330pF(331) 10%(K) GRM033R71E331KA01D GRM033R71C331KA01D 470pF(471) 10%(K) GRM033R71E471KA01D GRM033R71C471KA01D 680pF(681) 10%(K) GRM033R71E681KA01D GRM033R71C681KA01D 1000pF(102) 10%(K) GRM033R71E102KA01D GRM033R71C102KA01D 1500pF(152) 10%(K) GRM033R71E152KA01D GRM033R71C152KA01D 2200pF(222) 10%(K) GRM033R71C222KA88D GRM033R71A222KA01D 3300pF(332) 10%(K) GRM033R71C332KA88D GRM033R71A332KA01D 4700pF(472) 10%(K) GRM033R71A472KA01D GRM033R70J472KA01D 6800pF(682) 10%(K) GRM033R71A682KA01D GRM033R70J682KA01D 10000pF(103) 10%(K) GRM033R71A103KA01D GRM033R70J103KA01D < >: EIA [inch] Code Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GR M 02 2 R7 1A q w e r t y 680 K u i A01 L o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 36 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1.0x0.5(15)<0402> LxW [mm] 100(2A) 50(1H) 25(1E) 16(1C) Part Number 10%(K) GRM155R72A221KA01D GRM155R71H221KA01D 330pF(331) 10%(K) GRM155R72A331KA01D GRM155R71H331KA01D 470pF(471) 10%(K) GRM155R72A471KA01D GRM155R71H471KA01D 680pF(681) 10%(K) GRM155R72A681KA01D GRM155R71H681KA01D 1000pF(102) 10%(K) GRM155R72A102KA01D GRM155R71H102KA01D 1500pF(152) 10%(K) GRM155R72A152KA01D GRM155R71H152KA01D 2200pF(222) 10%(K) GRM155R72A222KA01D GRM155R71H222KA01D 3300pF(332) 10%(K) GRM155R72A332KA01D GRM155R71H332KA01D 4700pF(472) 10%(K) GRM155R72A472KA01D GRM155R71H472KA01D GRM155R71E472KA01D 6800pF(682) 10%(K) GRM155R71H682KA88D GRM155R71E682KA01D 10000pF(103) 10%(K) GRM155R71H103KA88D GRM155R71E103KA01D 15000pF(153) 10%(K) GRM155R71H153KA12D GRM155R71E153KA61D GRM155R71C153KA01D 22000pF(223) 10%(K) GRM155R71H223KA12D GRM155R71E223KA61D GRM155R71C223KA01D 33000pF(333) 10%(K) GRM155R71E333KA88D GRM155R71C333KA01D 47000pF(473) 10%(K) GRM155R71E473KA88D GRM155R71C473KA01D 68000pF(683) 10%(K) 0.10F(104) 10%(K) GRM155R71C104KA88D 0.15F(154) 10%(K) GRM155R71C154KA12D* 0.22F(224) 10%(K) GRM155R71C224KA12D* GRM155R71C683KA88D 1.0x0.5(15)<0402> LxW [mm] 10(1A) Tolerance Part Number 68000pF(683) 10%(K) GRM155R71A683KA01D 0.10F(104) 10%(K) GRM155R71A104KA01D High Frequency GQM Series Rated Volt. [Vdc] Capacitance Array GNM Series 220pF(221) Low ESL LLp Series Tolerance High-Q GJM Series Rated Volt. [Vdc] Capacitance For General GRM Series High Dielectric Constant Type X7R(R7) Characteristics Product Information For Bonding GMD Series Monolithic Microchip GMA Series The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GRM Series Specifications and Test Method (2). 37 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics 1.6x0.8(18)<0603> LxW [mm] High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series Capacitance 50(1H) Tolerance 25(1E) 16(1C) Part Number 220pF(221) 10%(K) GRM188R72A221KA01D GRM188R71H221KA01D 330pF(331) 10%(K) GRM188R72A331KA01D GRM188R71H331KA01D 470pF(471) 10%(K) GRM188R72A471KA01D GRM188R71H471KA01D 680pF(681) 10%(K) GRM188R72A681KA01D GRM188R71H681KA01D 1000pF(102) 10%(K) GRM188R72A102KA01D GRM188R71H102KA01D 1500pF(152) 10%(K) GRM188R72A152KA01D GRM188R71H152KA01D 2200pF(222) 10%(K) GRM188R72A222KA01D GRM188R71H222KA01D GRM188R71E222KA01D 3300pF(332) 10%(K) GRM188R72A332KA01D GRM188R71H332KA01D GRM188R71E332KA01D 4700pF(472) 10%(K) GRM188R72A472KA01D GRM188R71H472KA01D GRM188R71E472KA01D 6800pF(682) 10%(K) GRM188R72A682KA01D GRM188R71H682KA01D GRM188R71E682KA01D 10000pF(103) 10%(K) GRM188R72A103KA01D GRM188R71H103KA01D GRM188R71E103KA01D 15000pF(153) 10%(K) GRM188R71H153KA01D GRM188R71E153KA01D 22000pF(223) 10%(K) GRM188R71H223KA01D GRM188R71E223KA01D 33000pF(333) 10%(K) GRM188R71H333KA61D GRM188R71E333KA01D 47000pF(473) 10%(K) GRM188R71H473KA61D GRM188R71E473KA01D 68000pF(683) 10%(K) GRM188R71H683KA93D GRM188R71E683KA01D 0.10F(104) 10%(K) GRM188R71H104KA93D GRM188R71E104KA01D 0.15F(154) 10%(K) GRM188R71E154KA01D GRM188R71C154KA01D 0.22F(224) 10%(K) GRM188R71E224KA88D GRM188R71C224KA01D 0.33F(334) 10%(K) 0.47F(474) 10%(K) 0.68F(684) 10%(K) 1.0F(105) 10%(K) GRM188R72A104KA35D GRM188R71C334KA01D GRM188R71E474KA12D* GRM188R71C474KA88D GRM188C71C684KA12D* GRM188R71E105KA12D* GRM188R71C105KA12D* 1.6x0.8(18)<0603> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance 6.3(0J) Tolerance 4(0G) Part Number 0.33F(334) 10%(K) GRM188R71A334KA61D 0.47F(474) 10%(K) GRM188R71A474KA61D 0.68F(684) 10%(K) GRM188R71A684KA61D 1.0F(105) 10%(K) GRM188R71A105KA61D* 2.2F(225) 10%(K) GRM188R71A225KE15D* GRM188C70J225KE20D* GRM188C70G225KE20D* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GRM Series Specifications and Test Method (2). Product Information For Bonding GMD Series Monolithic Microchip GMA Series 100(2A) Rated Volt. [Vdc] (Part Number) GR M 18 8 R7 2A q w e r t y 221 K u i A01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 38 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2.0x1.25(21)<0805> LxW [mm] 100(2A) 50(1H) Tolerance 25(1E) 16(1C) Part Number 10%(K) GRM219R72A682KA01D 10%(K) GRM21BR72A103KA01L 15000pF(153) 10%(K) GRM21BR72A153KA01L 22000pF(223) 10%(K) GRM21BR72A223KA01L 33000pF(333) 10%(K) GRM21BR72A333KA01L GRM219R71H333KA01D 47000pF(473) 10%(K) GRM21BR72A473KA01L GRM21BR71H473KA01L 68000pF(683) 10%(K) GRM21BR71H683KA01L GRM219R71E683KA01D 0.10F(104) 10%(K) GRM21BR71H104KA01L GRM21BR71E104KA01L 0.15F(154) 10%(K) GRM21BR71H154KA01L GRM21BR71E154KA01L 0.22F(224) 10%(K) GRM21AR72A224KAC5L GRM21BR71H224KA01L GRM21BR71E224KA01L 0.33F(334) 10%(K) GRM21AR72A334KAC5L GRM219R71H334KA88D GRM21BR71E334KA01L 0.47F(474) 10%(K) GRM21BR72A474KA73L GRM21BR71H474KA88L GRM219R71E474KA88D 0.68F(684) 10%(K) GRM219R71E684KA88D GRM219R71C684KA01D 1.0F(105) 10%(K) GRM21BR71H105KA12L GRM21BR71E105KA99L GRM21BR71C105KA01L 2.2F(225) 10%(K) 4.7F(475) 10%(K) Array GNM Series 6800pF(682) 10000pF(103) Low ESL LLp Series Rated Volt. [Vdc] Capacitance For General GRM Series High Dielectric Constant Type X7R(R7)/X7U(E7) Characteristics GRM219R71E105KA88D GRM21BR71E225KA73L* High-Q GJM Series GRM21BR71C475KA73L* 2.0x1.25(21)<0805> LxW [mm] 10(1A) Tolerance 6.3(0J) 4(0G) Part Number 2.2F(225) 10%(K) GRM21BR71A225KA01L 4.7F(475) 10%(K) GRM21BR71A475KA73L* 10F(106) 10%(K) GRM21BR71A106KE51L* 22F(226) 20%(M) GRM21BR70J106KE76L* GRM21BE70G226ME51L* High Frequency GQM Series Rated Volt. [Vdc] Capacitance GRM21BR71C225KA12L Product Information For Bonding GMD Series Monolithic Microchip GMA Series The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GRM Series Specifications and Test Method (2). 39 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X7R(R7)/X7U(E7) Characteristics 3.2x1.6(31)<1206> LxW [mm] 100(2A) Rated Volt. [Vdc] Low ESL LLp Series Array GNM Series Capacitance 50(1H) 15000pF(153) 10%(K) GRM319R72A153KA01L 22000pF(223) 10%(K) GRM31MR72A223KA01L 33000pF(333) 10%(K) GRM31MR72A333KA01L 47000pF(473) 10%(K) GRM31MR72A473KA01L 68000pF(683) 10%(K) GRM31MR72A683KA01L 0.10F(104) 10%(K) GRM319R72A104KA01D 0.15F(154) 10%(K) GRM31MR72A154KA01L GRM31MR71H154KA01L 0.22F(224) 10%(K) GRM31MR72A224KA01L GRM31MR71H224KA01L 0.33F(334) 10%(K) GRM319R71H334KA01D GRM319R71E334KA01D 0.47F(474) 10%(K) GRM31MR72A474KA35L GRM31MR71H474KA01L GRM319R71E474KA01D 0.68F(684) 10%(K) GRM31MR72A684KA35L GRM31MR71H684KA88L GRM319R71E684KA01D 1.0F(105) 10%(K) GRM31CR72A105KA01L GRM31MR71H105KA88L 2.2F(225) 10%(K) GRM31CR71H225KA88L GRM31MR71E225KA93L 4.7F(475) 10%(K) GRM31CR71H475KA12L GRM31CR71E475KA88L GRM31CR71C475KA01L 10F(106) 10%(K) GRM31CR71E106KA12L* GRM31CR71C106KAC7L* High-Q GJM Series Capacitance 6.3(0J) Tolerance High Frequency GQM Series 4(0G) Part Number 10F(106) 10%(K) GRM31CR71A106KA01L 22F(226) 20%(M) GRM31CR71A226ME15L* 47F(476) 20%(M) GRM31CR70J226ME19L* GRM31CE70G476ME15L* 3.2x2.5(32)<1210> LxW [mm] Monolithic Microchip GMA Series GRM31MR71C225KA35L 3.2x1.6(31)<1206> 10(1A) Rated Volt. [Vdc] For Bonding GMD Series 16(1C) Part Number LxW [mm] Product Information 25(1E) Tolerance 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 35(YA) 25(1E) GRM32ER7YA106KA12L GRM32DR71E106KA12L Part Number 0.68F(684) 10%(K) GRM32CR72A684KA01L 1.0F(105) 10%(K) GRM32CR72A105KA35L 2.2F(225) 10%(K) GRM32ER72A225KA35L 4.7F(475) 10%(K) 10F(106) 10%(K) 22F(226) 20%(M) GRM32ER71H475KA88L GRM32ER71E226ME15L* 3.2x2.5(32)<1210> LxW [mm] 16(1C) Rated Volt. [Vdc] Capacitance 10(1A) Tolerance 22F(226) 20%(M) 47F(476) 20%(M) 100F(107) 20%(M) 6.3(0J) 4(0G) Part Number GRM32ER71C226MEA8L* GRM32ER71A226ME20L* GRM32ER71A476ME15L* GRM32ER70J476ME20L* GRM32EE70G107ME19L* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GRM Series Specifications and Test Method (2). (Part Number) GR M 31 9 R7 2A q w e r t y 153 K u i A01 L o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 40 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1.0x0.5(15)<0402> LxW [mm] 50(1H) 10%(K) GRM15XR71H221KA86D 330pF(331) 10%(K) GRM15XR71H331KA86D 470pF(471) 10%(K) GRM15XR71H471KA86D 680pF(681) 10%(K) GRM15XR71H681KA86D 1000pF(102) 10%(K) GRM15XR71H102KA86D 1500pF(152) 10%(K) GRM15XR71H152KA86D 2200pF(222) 10%(K) 3300pF(332) 10%(K) GRM15XR71C332KA86D 4700pF(472) 10%(K) GRM15XR71C472KA86D 6800pF(682) 10%(K) GRM15XR71C682KA86D 10000pF(103) 10%(K) GRM15XR71C103KA86D 1.0F(105) 10%(K) Array GNM Series 220pF(221) GRM15XR71E222KA86D GRM185D71A105KE36D* 2.0x1.25(21)<0805> LxW [mm] 100(2A) 50(1H) Tolerance 25(1E) 6800pF(682) 10%(K) 33000pF(333) 10%(K) 68000pF(683) 10%(K) 0.22F(224) 10%(K) GRM21AR72A224KAC5L 0.33F(334) 10%(K) GRM21AR72A334KAC5L 0.47F(474) 10%(K) GRM219R71E474KA88D 0.68F(684) 10%(K) GRM219R71E684KA88D 1.0F(105) 10%(K) GRM219R71E105KA88D GRM219R72A682KA01D GRM219R71E683KA01D GRM219R71H334KA88D GRM219R71C684KA01D 3.2x1.6(31)<1206> 100(2A) 50(1H) Tolerance 25(1E) 16(1C) Part Number 15000pF(153) 10%(K) GRM319R72A153KA01L 22000pF(223) 10%(K) GRM31MR72A223KA01L 33000pF(333) 10%(K) GRM31MR72A333KA01L 47000pF(473) 10%(K) GRM31MR72A473KA01L 68000pF(683) 10%(K) GRM31MR72A683KA01L 0.10F(104) 10%(K) GRM319R72A104KA01D 0.15F(154) 10%(K) GRM31MR72A154KA01L GRM31MR71H154KA01L 0.22F(224) 10%(K) GRM31MR72A224KA01L GRM31MR71H224KA01L 0.33F(334) 10%(K) 0.47F(474) 10%(K) GRM31MR72A474KA35L GRM31MR71H474KA01L 0.68F(684) 10%(K) GRM31MR72A684KA35L GRM31MR71H684KA88L 1.0F(105) 10%(K) 2.2F(225) 10%(K) 4.7F(475) 10%(K) Monolithic Microchip GMA Series Rated Volt. [Vdc] GRM319R71H334KA01D GRM31MR71H105KA88L GRM31MR71E225KA93L GRM31MR71C225KA35L GRM319D71C475KA12D*# 3.2x2.5(32)<1210> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance High-Q GJM Series GRM219R71H333KA01D LxW [mm] Capacitance 16(1C) Part Number High Frequency GQM Series Rated Volt. [Vdc] Capacitance 10(1A) Part Number Tolerance Low ESL LLp Series Tolerance 16(1C) 50(1H) Part Number 0.68F(684) 10%(K) GRM32CR72A684KA01L 1.0F(105) 10%(K) GRM32CR72A105KA35L Product Information Capacitance 1.6x0.8(18)<0603> 25(1E) For Bonding GMD Series Rated Volt. [Vdc] For General GRM Series High Dielectric Constant Type X7R(R7)/X7T(D7) Characteristics-Low Profile GRM32NR71H684KA01L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GRM Series Specifications and Test Method (2). # These Part Numbers have individual testing conditions on Durability of GRM Series Specifications and Test Methods (2). Please refer to P60. 41 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X6S(C8) Characteristics 0.6x0.3(03)<0201> LxW [mm] Capacitance Array GNM Series 6.3(0J) Rated Volt. [Vdc] Tolerance 4(0G) Part Number 15000pF(153) 10%(K) GRM033C80J153KE01D* GRM033C80G153KE01D* 22000pF(223) 10%(K) GRM033C80J223KE01D* GRM033C80G223KE01D* 33000pF(333) 10%(K) GRM033C80J333KE01D* GRM033C80G333KE01D* 47000pF(473) 10%(K) GRM033C80J473KE19D* GRM033C80G473KE01D* 1.0x0.5(15)<0402> LxW [mm] 25(1E) Rated Volt. [Vdc] Low ESL LLp Series Capacitance 6.3(0J) Tolerance 68000pF(683) 10%(K) GRM155C81E683KA12D 0.10F(104) 10%(K) GRM155C81E104KA12D 0.15F(154) 10%(K) GRM155C80J154KE01D* GRM155C80G154KE01D* 0.22F(224) 10%(K) GRM155C80J224KE01D* GRM155C80G224KE01D* 0.33F(334) 10%(K) GRM155C80J334KE01D* GRM155C80G334KE01D* 0.47F(474) 10%(K) GRM155C80J474KE19D* GRM155C80G474KE01D* 0.68F(684) 10%(K) GRM155C80J684KE15D*# GRM155C80G684KE19D* 1.6x0.8(18)<0603> LxW [mm] 25(1E) High Frequency GQM Series High-Q GJM Series Rated Volt. [Vdc] Capacitance 10(1A) Tolerance 1.0F(105) 10%(K) 2.2F(225) 10%(K) 4(0G) GRM188C81E105KAADD GRM188C81A225KE34D* GRM188C80J225KE19D* 4.7F(475) 10%(K) GRM188C80G475KE19D* 10F(106) 20%(M) GRM188C80G106ME47D*# 1.6x0.8(18)<0603> LxW [mm] 2.5(0E) Rated Volt. [Vdc] Capacitance Tolerance Part Number 20%(M) 10F(106) GRM188C80E106ME47D* 2.0x1.25(21)<0805> 25(1E) Rated Volt. [Vdc] Monolithic Microchip GMA Series 6.3(0J) Part Number LxW [mm] Capacitance 16(1C) Tolerance 1.0F(105) 10%(K) 2.2F(225) 10%(K) 4.7F(475) 10%(K) 10F(106) 10%(K) 10(1A) 6.3(0J) Part Number GRM216C81C105KA12D* GRM219C81C225KA12D* GRM21BC81C475KA88L* GRM21BC81E475KA12L* GRM219C81A475KE34D* GRM219C80J475KE19D* GRM21BC81A106KE18L* GRM21BC80J106KE19L* GRM219C80J106KE39D* 20%(M) 22F(226) For Bonding GMD Series 4(0G) Part Number GRM21BC80J226ME51L*# 2.0x1.25(21)<0805> LxW [mm] 4(0G) Rated Volt. [Vdc] Capacitance Tolerance 22F(226) Part Number 20%(M) GRM21BC80G226ME39L* Product Information The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GRM Series Specifications and Test Method (2). # These Part Numbers have individual testing conditions on Durability of GRM Series Specifications and Test Methods (2). Please refer to P60. (Part Number) GR M 03 3 C8 0J 153 K q w e r t y u i E01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 42 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 3.2x1.6(31)<1206> LxW [mm] 25(1E) 10%(K) 4.7F(475) 10%(K) 10F(106) 10%(K) 22F(226) 20%(M) 47F(476) 20%(M) 6.3(0J) Part Number GRM316C81C225KA12D* GRM319C81C475KA12D* GRM31CC81E106KE15L* GRM31MC81C106KA12L GRM319C81A106KA12D GRM319C80J106KE19D* GRM31CC81A226ME19L* GRM31CC80J226ME19L* GRM31CC80J476ME18L* 3.2x1.6(31)<1206> LxW [mm] 4(0G) Part Number 47F(476) 20%(M) GRM31CC80G476ME19L* 100F(107) 20%(M) GRM31CD80G107ME39L* Low ESL LLp Series Tolerance 3.2x2.5(32)<1210> LxW [mm] 25(1E) Rated Volt. [Vdc] 10(1A) Tolerance 6.3(0J) 4(0G) Part Number 10F(106) 10%(K) GRM32DC81E106KA12L 22F(226) 20%(M) GRM32EC81E226ME15L* 47F(476) 20%(M) 100F(107) 20%(M) GRM32NC81A226ME19L* GRM32EC81A476ME19L* GRM32EC80J476ME64L* GRM32EC80J107ME20L* GRM32EC80G107ME20L* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code *: Please refer to GRM Series Specifications and Test Method(2). High-Q GJM Series Rated Volt. [Vdc] Capacitance 10(1A) Tolerance 2.2F(225) Capacitance 16(1C) Array GNM Series Rated Volt. [Vdc] Capacitance For General GRM Series High Dielectric Constant Type X6S(C8)/X6T(D8) Characteristics High Dielectric Constant Type X6S(C8) Characteristics-Low Profile 10(1A) Rated Volt. [Vdc] Tolerance 10%(K) Part Number GRM185C81A105KE36D* 2.0x1.25(21)<0805> 16(1C) Rated Volt. [Vdc] Tolerance 10%(K) GRM216C81C105KA12D* 2.2F(225) 10%(K) GRM219C81C225KA12D* 4.7F(475) 10%(K) 10F(106) 10%(K) GRM219C81A475KE34D* 16(1C) Rated Volt. [Vdc] Tolerance Part Number 2.2F(225) 10%(K) GRM316C81C225KA12D* 4.7F(475) 10%(K) GRM319C81C475KA12D* 3.2x2.5(32)<1210> LxW [mm] 25(1E) Rated Volt. [Vdc] 10F(106) GRM219C80J475KE19D* GRM219C80J106KE39D* 3.2x1.6(31)<1206> LxW [mm] Capacitance 6.3(0J) Part Number 1.0F(105) Capacitance 10(1A) Monolithic Microchip GMA Series LxW [mm] Capacitance GRM185C80J105KE26D* For Bonding GMD Series 1.0F(105) 6.3(0J) Tolerance 10%(K) Part Number Product Information Capacitance High Frequency GQM Series 1.6x0.8(18)<0603> LxW [mm] GRM32DC81E106KA12L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GRM Series Specifications and Test Method (2). 43 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X5R(R6) Characteristics 0.4x0.2(02)<01005> LxW [mm] 10(1A) Rated Volt. [Vdc] Low ESL LLp Series Array GNM Series Capacitance Tolerance 6.3(0J) Part Number 68pF(680) 10%(K) GRM022R61A680KA01L 100pF(101) 10%(K) GRM022R61A101KA01L 150pF(151) 10%(K) GRM022R61A151KA01L 220pF(221) 10%(K) GRM022R61A221KA01L 330pF(331) 10%(K) GRM022R61A331KA01L 470pF(471) 10%(K) GRM022R61A471KA01L 680pF(681) 10%(K) GRM022R61A681KE19L* GRM022R60J681KE19L* 1000pF(102) 10%(K) GRM022R61A102KE19L* GRM022R60J102KE19L* 1500pF(152) 10%(K) GRM022R61A152KE19L* GRM022R60J152KE19L* 2200pF(222) 10%(K) GRM022R61A222KE19L* GRM022R60J222KE19L* 3300pF(332) 10%(K) GRM022R61A332KE19L* GRM022R60J332KE19L* 4700pF(472) 10%(K) GRM022R61A472KE19L* GRM022R60J472KE19L* 6800pF(682) 10%(K) GRM022R61A682KE19L* GRM022R60J682KE19L* 10000pF(103) 10%(K) GRM022R61A103KE19L* GRM022R60J103KE19L* 25(1E) 16(1C) 0.6x0.3(03)<0201> LxW [mm] Rated Volt. [Vdc] Tolerance 10(1A) 6.3(0J) Part Number 100pF(101) 10%(K) 150pF(151) 10%(K) 220pF(221) 10%(K) 330pF(331) 10%(K) 470pF(471) 10%(K) 680pF(681) 10%(K) 1000pF(102) 10%(K) 1500pF(152) 10%(K) GRM033R61A152KA01D 2200pF(222) 10%(K) GRM033R61A222KA01D 3300pF(332) 10%(K) GRM033R61A332KA01D 4700pF(472) 10%(K) GRM033R61A472KA01D 6800pF(682) 10%(K) GRM033R61A682KA01D 10000pF(103) 10%(K) GRM033R61A103KA01D 15000pF(153) 10%(K) GRM033R60J153KE01D* 22000pF(223) 10%(K) GRM033R60J223KE01D* 33000pF(333) 10%(K) GRM033R60J333KE01D* 47000pF(473) 10%(K) GRM033R60J473KE19D* GRM033R60J103KA01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc. Characteristics. * Please refer to GRM Series Specifications and Test Method (2). Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Capacitance (Part Number) GR M 02 2 R6 1A q w e r t y 680 K u i A01 L o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 44 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) rDimension (T) yRated Voltage uCapacitance oIndividual Specification Code !0Packaging* *GRM022: D is applicable. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1.0x0.5(15)<0402> LxW [mm] 100(2A) 50(1H) Tolerance 25(1E) 16(1C) Part Number 10%(K) 330pF(331) 10%(K) 470pF(471) 10%(K) 680pF(681) 10%(K) 1000pF(102) 10%(K) 1500pF(152) 10%(K) 2200pF(222) 10%(K) 3300pF(332) 10%(K) 4700pF(472) 10%(K) 6800pF(682) 10%(K) 10000pF(103) 10%(K) 15000pF(153) 10%(K) 22000pF(223) 10%(K) GRM155R61C223KA01D 33000pF(333) 10%(K) GRM155R61C333KA01D 47000pF(473) 10%(K) 68000pF(683) 10%(K) GRM155R61E683KA87D GRM155R61C683KA88D 0.10F(104) 10%(K) GRM155R61E104KA87D GRM155R61C104KA88D GRM155R61H102KA01D GRM155R61H222KA01D GRM155R61H472KA01D High-Q GJM Series GRM155R61C473KA01D 1.0x0.5(15)<0402> LxW [mm] 10(1A) 6.3(0J) Part Number 33000pF(333) 10%(K) GRM155R61A333KA01D 47000pF(473) 10%(K) GRM155R61A473KA01D 68000pF(683) 10%(K) GRM155R61A683KA01D 0.10F(104) 10%(K) GRM155R61A104KA01D 0.15F(154) 10%(K) GRM155R61A154KE19D* GRM155R60J154KE01D* 0.22F(224) 10%(K) GRM155R61A224KE19D* GRM155R60J224KE01D* 0.33F(334) 10%(K) GRM155R61A334KE15D* GRM155R60J334KE01D* 0.47F(474) 10%(K) GRM155R61A474KE15D* GRM155R60J474KE19D* 0.68F(684) 10%(K) GRM155R61A684KE15D* GRM155R60J684KE19D* 1.0F(105) 10%(K) GRM155R61A105KE15D* High Frequency GQM Series Tolerance Monolithic Microchip GMA Series Rated Volt. [Vdc] Capacitance Array GNM Series 220pF(221) Low ESL LLp Series Rated Volt. [Vdc] Capacitance For General GRM Series High Dielectric Constant Type X5R(R6) Characteristics Product Information For Bonding GMD Series The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc. Characteristics. * Please refer to GRM Series Specifications and Test Method (2). 45 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X5R(R6) Characteristics 1.6x0.8(18)<0603> LxW [mm] High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series Capacitance 50(1H) Tolerance 220pF(221) 10%(K) 330pF(331) 10%(K) 470pF(471) 10%(K) 680pF(681) 10%(K) 1000pF(102) 10%(K) 1500pF(152) 10%(K) 2200pF(222) 10%(K) 3300pF(332) 10%(K) 4700pF(472) 10%(K) 6800pF(682) 10%(K) 10000pF(103) 10%(K) 15000pF(153) 10%(K) 22000pF(223) 10%(K) 33000pF(333) 10%(K) 47000pF(473) 10%(K) 68000pF(683) 10%(K) 0.10F(104) 10%(K) 0.15F(154) 10%(K) 0.22F(224) 10%(K) 0.33F(334) 10%(K) 0.47F(474) 25(1E) 16(1C) Part Number GRM188R61H102KA01D GRM188R61H222KA01D GRM188R61H472KA01D GRM188R61H103KA01D GRM188R61H223KA01D GRM188R61E104KA01D GRM188R61E224KA88D GRM188R61C224KA88D 10%(K) GRM188R61E474KA12D* GRM188R61C474KA93D* 1.0F(105) 10%(K) GRM188R61E105KA12D* GRM188R61C105KA93D* 2.2F(225) 10%(K) GRM188R61C225KE15D* 1.6x0.8(18)<0603> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance 6.3(0J) Tolerance 4(0G) Part Number 0.68F(684) 10%(K) GRM188R61A684KA61D 2.2F(225) 10%(K) GRM188R61A225KE34D* 4.7F(475) 10%(K) GRM188R60J475KE19D* 10F(106) 20%(M) GRM188R60J106ME47D* 22F(226) 20%(M) GRM188R60G106ME47D* GRM188R60G226MEA0L* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc. Characteristics. * Please refer to GRM Series Specifications and Test Method (2). Product Information For Bonding GMD Series Monolithic Microchip GMA Series 100(2A) Rated Volt. [Vdc] (Part Number) GR M 18 8 R6 1H q w e r t y 102 K u i A01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 46 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2.0x1.25(21)<0805> LxW [mm] 100(2A) 50(1H) 6800pF(682) 10%(K) 10000pF(103) 10%(K) 15000pF(153) 10%(K) 22000pF(223) 10%(K) 33000pF(333) 10%(K) 47000pF(473) 10%(K) 68000pF(683) 10%(K) 0.10F(104) 10%(K) 0.15F(154) 10%(K) 0.22F(224) 10%(K) 0.33F(334) 10%(K) 0.47F(474) 10%(K) 0.68F(684) 10%(K) 1.0F(105) 10%(K) 25(1E) 16(1C) Part Number Array GNM Series Tolerance GRM216R61E105KA12D GRM21BR61C105KA01L Low ESL LLp Series Rated Volt. [Vdc] Capacitance For General GRM Series High Dielectric Constant Type X5R(R6) Characteristics GRM216R61C105KA88D* 2.2F(225) 10%(K) GRM21BR61E225KA12L GRM219R61E225KA12D* GRM219R61C225KA88D* 4.7F(475) 10%(K) GRM21BR61E475KA12L* GRM21BR61C475KA88L* 10F(106) 10%(K) GRM219R61C475KE15D* GRM21BR61C106KE15L* 2.0x1.25(21)<0805> LxW [mm] 10(1A) Tolerance 6.3(0J) 4(0G) Part Number 2.2F(225) 10%(K) GRM21BR61A225KA01L 4.7F(475) 10%(K) GRM21BR61A475KA73L* 10F(106) 10%(K) GRM21BR61A106KE19L* High Frequency GQM Series Rated Volt. [Vdc] Capacitance GRM21BR60J475KA11L* GRM219R61A475KE34D* GRM219R61A106KE44D* 22F(226) High-Q GJM Series GRM21BR61C225KA88L* 20%(M) GRM21BR60J106KE19L* GRM219R60J106KE19D* GRM21BR60J226ME39L* GRM219R60G226ME66D* Product Information For Bonding GMD Series Monolithic Microchip GMA Series The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc. Characteristics. * Please refer to GRM Series Specifications and Test Method (2). 47 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X5R(R6) Characteristics 3.2x1.6(31)<1206> LxW [mm] 100(2A) Rated Volt. [Vdc] Low ESL LLp Series Array GNM Series Capacitance 50(1H) 25(1E) Tolerance 15000pF(153) 10%(K) 22000pF(223) 10%(K) 33000pF(333) 10%(K) 47000pF(473) 10%(K) 68000pF(683) 10%(K) 0.10F(104) 10%(K) 0.15F(154) 10%(K) 0.22F(224) 10%(K) 0.33F(334) 10%(K) 0.47F(474) 10%(K) 0.68F(684) 10%(K) 1.0F(105) 10%(K) 2.2F(225) 10%(K) 4.7F(475) 10%(K) 10F(106) 10%(K) 22F(226) 20%(M) 16(1C) Part Number GRM31CR61H225KA88L GRM316R61E225KA12D* GRM31CR61E475KA88L GRM31CR61C475KA01L GRM319R61E475KA12D* GRM319R61C475KA88D* GRM31CR61E106KA12L* GRM31CR61C106KA88L High-Q GJM Series GRM319R61C106KE15D* 3.2x1.6(31)<1206> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance High Frequency GQM Series GRM31CR61C226ME15L* 6.3(0J) Tolerance Part Number 10F(106) 10%(K) GRM319R61A106KE19L* 22F(226) 20%(M) GRM31CR61A226ME19L* GRM31CR60J226ME19L* 47F(476) 20%(M) GRM31CR61A476ME15L* GRM31CR60J476ME19L* 100F(107) 20%(M) GRM31CR60J107ME39L* 100(2A) Rated Volt. [Vdc] Monolithic Microchip GMA Series GRM31CR60G107ME39L* 3.2x2.5(32)<1210> LxW [mm] Capacitance 50(1H) Tolerance 0.68F(684) 10%(K) 1.0F(105) 10%(K) 2.2F(225) 10%(K) 4.7F(475) 10%(K) 10F(106) 10%(K) 22F(226) 20%(M) 35(YA) 25(1E) Part Number GRM32ER6YA106KA12L GRM32DR61E106KA12L GRM32ER61E226ME15L* 3.2x2.5(32)<1210> LxW [mm] 16(1C) Rated Volt. [Vdc] For Bonding GMD Series 4(0G) Capacitance 10(1A) Tolerance 22F(226) 20%(M) 47F(476) 20%(M) 100F(107) 20%(M) 6.3(0J) Part Number GRM32ER61C476ME15L* GRM32ER61A476ME20L* GRM32ER60J107ME20L* Product Information The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc. Characteristics. * Please refer to GRM Series Specifications and Test Method (2). (Part Number) GR M 31 C R6 1H q w e r t y 225 K u i A88 L o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 48 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1.0x0.5(15)<0402> LxW [mm] 16(1C) 10%(K) 330pF(331) 10%(K) 470pF(471) 10%(K) 680pF(681) 10%(K) 1000pF(102) 10%(K) 1500pF(152) 10%(K) 2200pF(222) 10%(K) 3300pF(332) 10%(K) 4700pF(472) 10%(K) 6800pF(682) 10%(K) 10000pF(103) 10%(K) 1.6x0.8(18)<0603> LxW [mm] 16(1C) Rated Volt. [Vdc] Tolerance 10%(K) 10(1A) Part Number GRM185R61C105KE44D* GRM185R61A105KE36D* 100(2A) 50(1H) Rated Volt. [Vdc] Capacitance Tolerance 25(1E) High-Q GJM Series 2.0x1.25(21)<0805> LxW [mm] 16(1C) Part Number 6800pF(682) 10%(K) 33000pF(333) 10%(K) 68000pF(683) 10%(K) 0.22F(224) 10%(K) 0.33F(334) 10%(K) 0.47F(474) 10%(K) 0.68F(684) 10%(K) 1.0F(105) 10%(K) GRM216R61E105KA12D GRM216R61C105KA88D 2.2F(225) 10%(K) GRM219R61E225KA12D* GRM219R61C225KA88D* 4.7F(475) 10%(K) Capacitance Monolithic Microchip GMA Series GRM219R61C475KE15D* 2.0x1.25(21)<0805> LxW [mm] 10(1A) Rated Volt. [Vdc] High Frequency GQM Series 1.0F(105) 16(1C) Part Number Array GNM Series 220pF(221) Capacitance 25(1E) Tolerance Low ESL LLp Series Rated Volt. [Vdc] Capacitance For General GRM Series High Dielectric Constant Type X5R(R6) Characteristics-Low Profile Tolerance 6.3(0J) 4(0G) Part Number 4.7F(475) 10%(K) GRM219R61A475KE34D* 10F(106) 10%(K) GRM219R61A106KE44D* 22F(226) 20%(M) GRM219R60J106KE19D* GRM219R60G226ME66D* Product Information For Bonding GMD Series The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc. Characteristics. * Please refer to GRM Series Specifications and Test Method (2). 49 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X5R(R6) Characteristics-Low Profile 3.2x1.6(31)<1206> LxW [mm] 100(2A) Rated Volt. [Vdc] Low ESL LLp Series Array GNM Series Capacitance Tolerance 15000pF(153) 10%(K) 22000pF(223) 10%(K) 33000pF(333) 10%(K) 47000pF(473) 10%(K) 68000pF(683) 10%(K) 0.10F(104) 10%(K) 0.15F(154) 10%(K) 0.22F(224) 10%(K) 0.33F(334) 10%(K) 0.47F(474) 10%(K) 0.68F(684) 10%(K) 1.0F(105) 10%(K) 2.2F(225) 10%(K) GRM316R61E225KA12D* 4.7F(475) 10%(K) GRM319R61E475KA12D* 10F(106) 10%(K) 16(1C) GRM319R61C475KA88D* GRM319R61C106KE15D* 3.2x1.6(31)<1206> 10(1A) Rated Volt. [Vdc] Capacitance Tolerance Part Number 10%(K) 10F(106) GRM319R61A106KE19D* 3.2x2.5(32)<1210> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 50(1H) Tolerance 0.68F(684) 10%(K) 1.0F(105) 10%(K) 10F(106) 10%(K) 25(1E) Part Number GRM32DR61E106KA12L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code : Please refer to X7R(R7) etc. Characteristics. * Please refer to GRM Series Specifications and Test Method (2). Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series 25(1E) Part Number LxW [mm] High-Q GJM Series 50(1H) (Part Number) GR M 31 6 R6 1E q w e r t y 225 K u i A12 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 50 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (Note 1) These Specifications and Test Methods indicate typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). -55 to +125C (2P/R/S/T, 3P/R/S/T/U, 4P/R/S/T/U: -25 to +85C) B1, B3, F1: -25 to +85C R1, R7: -55 to +125C R6: -55 to +85C C8: -55 to +105C E4: +10 to +85C F5: -30 to +85C Test Method Reference temperature: 25C (2, 3, 4, B1, B3, F1, R1: 20C) 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimensions Using calipers (GRM02 size is based on Microscope) No defects or abnormalities No failure should be observed when 300%* of the rated voltage (temperature compensating type) or 250% of the rated voltage (high dielectric constant type) is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. *200% for 500V 7 8 Capacitance Q/ Dissipation Factor (D.F.) CV0.047F: More than 10,000M CG0.047F: More than 500 * F C: Nominal Capacitance The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 20/25C and 75%RH max. and within 2 minutes of charging, provided the charge/ discharge current is less than 50mA. Within the specified tolerance 30pF and over: QU1000 30pF and below: QU400+20C C: Nominal Capacitance (pF) [R6, R7, C8] W.V.: 100V : 0.025 max. (CF0.068F) : 0.05 max. (CU0.068F) W.V.: 50/35/25V: : 0.025 max.* *GRM32D R7/R6/C8 1E106: 0.035 max. W.V.: 16/10V: 0.035 max. W.V.: 6.3/4V : 0.05 max. (CF3.3F) : 0.1 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.025 max. [F1, F5] W.V.: 25V min. : 0.05 max. (CF0.1F) : 0.09 max. (CU0.1F) W.V.: 16/10V: 0.125 max. W.V.: 6.3V: 0.15 max. The capacitance/Q/D.F. should be measured at 20/25C at the frequency and voltage shown in the table. Char. Item C to 7U, 1X C (more than to 7U, 1X R6, R7, F5 1000pF) (1000pF and (C>10F) R6, R7, C8, below) F5, B1, B3, F1 Frequency 10.1MHz Voltage 0.5 to 5Vrms 10.1kHz 10.2Vrms High Frequency GQM Series Insulation Resistance E4 12024Hz 10.1kHz 0.5 0.5 0.1Vrms 0.05Vrms Monolithic Microchip GMA Series 6 Continued on the following page. For Bonding GMD Series Dielectric Strength Product Information 5 Array GNM Series Operating Temperature Range Specifications Temperature High Dielectric Type Compensating Type Low ESL LLp Series 1 Item High-Q GJM Series No. For General GRM Series GRM GRM Series Specifications and Test (1) (Note 1)-Typical Inspection Series Specifications and Methods Test Methods (1) (Note 1)-Typical Inspection 51 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Series Specifications and Methods Test Methods (1) (Note 1)-Typical Inspection GRM GRM Series Specifications and Test (1) (Note 1)-Typical Inspection Continued from the preceding page. Item Array GNM Series No. Low ESL LLp Series No bias (Note 1) These Specifications and Test Methods indicate typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). Specifications Temperature High Dielectric Type Compensating Type Within the specified tolerance (Table A-1) B1, B3: Within 10% (-25 to +85C) R1, R7: Within 15% (-55 to +125C) R6: Within 15% (-55 to +85C) E4: Within +22/-56% (+10 to +85C) F1: Within +30/-80% (-25 to +85C) F5: Within +22/-82% (-30 to +85C) C8: Within 22% (-55 to +105C) Test Method The capacitance change should be measured after 5 min. at each specified temp. stage. (1)Temperature Compensating Type The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from steps 1 through 5 (5C: +25 to +125C/C: +20 to +125C: other temp. coeffs.: +25 to +85C/+20 to +85C) the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as in Table A-1. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in the steps 1, 3 and 5 by the cap. value in step 3. Step 1 B1: Within +10/-30% R1: Within +15/-40% F1: Within +30/-95% 50% of the Rated Voltage 2 3 4 High-Q GJM Series 9 5 Capacitance Temperature Characteristics High Frequency GQM Series Within 0.2% or 0.05pF Capacitance (whichever is larger.) Drift *Do not apply to 1X/25V *Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. (2) High Dielectric Constant Type The ranges of capacitance change compared with the Reference Temperature value over the temperature ranges shown in the table should be within the specified ranges.* When applying voltage, the capacitance change should be measured after 1 more min. with applying voltage in equilibration of each temp. stage. Step 1 2 3 4 5 Monolithic Microchip GMA Series 6 7 8 No removal of the terminations or other defect should occur. Temperature (C) Applying Voltage (V) Reference Temperature 2 -553 (for C8, R1, R7, R6) -253 (for B1, B3, F1) -303 (for F5)/103 (for E4) No bias Reference Temperature 2 1253 (for R1, R7)/ 853 (for B1, B3, R6 F1, F5, E4)/1053 (for C8) Reference Temperature 2 -553 (for R1)/ -253 (for B1, F1) 50% of the rated voltage Reference Temperature 2 1253 (for R1)/ 853 (for B1, F1) Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 1a using a eutectic solder. Then apply 10N* force in parallel with the test jig for 101 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *1N (GRM02), 2N (GRM03), 5N (GRM15, GRM18) (in mm) a Adhesive Strength 10 of Termination b For Bonding GMD Series c Temperature (C) Reference Temperature 2 -553 (for C to 7U/R6/R7/C8) -303 (for F5), 103 (for E4) -253 (for other TC) Reference Temperature 2 1253 (for C/R7), 1053 (for C8) 853 (for other TC) Reference Temperature 2 Solder resist Baked electrode or copper foil Product Information Fig. 1a Type GRM02 GRM03 GRM15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55 a 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 Continued on the following page. 52 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specifications Temperature High Dielectric Type Compensating Type Within the specified tolerance Vibration Resistance Q/D.F. [B1, B3, R6, R7, C8] W.V.: 100V : 0.025 max. (CF0.068F) : 0.05 max. (CU0.068F) W.V.: 50/35/25V: : 0.025 max.* *GRM32D R7/R6/C8 1E106: 0.035 max. W.V.: 16/10V: 0.035 max. W.V.: 6.3/4V : 0.05 max. (CF3.3F) : 0.1 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.025 max. [F1, F5] W.V.: 25V min. : 0.05 max. (CF0.1F) : 0.09 max. (CU0.1F) W.V.: 16/10V: 0.125 max. W.V.: 6.3V: 0.15 max. 30pF and over: QU1000 30pF and below: QU400+20C C: Nominal Capacitance (pF) Appearance No marking defects Capacitance Change Within 5% or 0.5pF (whichever is larger) Within 10% Solder the capacitor on the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 2a using a eutectic solder. Then apply a force in the direction shown in Fig. 3a for 51 sec. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. b 40 4.5 c 20 12 Deflection 50 Pressurizing speed: 1.0mm/sec. Pressurize R230 a 100 Fig. 2a t: 1.6mm (GRM02/03/15: t: 0.8mm) Capacitance meter 45 45 Fig. 3a Type GRM02 GRM03 GRM15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55 a 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 Monolithic Microchip GMA Series Flexure : V1 (in mm) Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in a eutectic solder solution for 20.5 seconds at 2305C or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. Continued on the following page. Product Information 13 Array GNM Series Capacitance Low ESL LLp Series No defects or abnormalities High-Q GJM Series Appearance Test Method High Frequency GQM Series 11 Item SWT(c)\X,QRU|SVYZW VZ[_(R)]^ No. For Bonding GMD Series Continued from the preceding page. (Note 1) These Specifications and Test Methods indicate typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). For General GRM Series GRM GRM Series Specifications and Test (1) (Note 1)-Typical Inspection Series Specifications and Methods Test Methods (1) (Note 1)-Typical Inspection 53 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Series Specifications and Methods Test Methods (1) (Note 1)-Typical Inspection GRM GRM Series Specifications and Test (1) (Note 1)-Typical Inspection Continued from the preceding page. No. Item (Note 1) These Specifications and Test Methods indicate typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). Specifications Temperature High Dielectric Type Compensating Type Test Method Low ESL LLp Series Array GNM Series The measured and observed characteristics should satisfy the specifications in the following table. Appearance No defects or abnormalities Capacitance Change Within 2.5% or 0.25pF (whichever is larger) Resistance to 14 Soldering Heat Q/D.F. 30pF and over: QU1000 30pF and below: QU400+20C High-Q GJM Series C: Nominal Capacitance (pF) B1, B3, R1, R6, R7, C8: Within 7.5% F1, F5, E4: Within 20% [B1, B3, R6, R7, C8] W.V.: 100V : 0.025 max. (CF0.068F) : 0.05 max. (CU0.068F) W.V.: 50/35/25V: : 0.025 max.* *GRM32D R7/R6/C8 1E106: 0.035 max. W.V.: 16/10V: 0.035 max. W.V.: 6.3/4V : 0.05 max. (CF3.3F) : 0.1 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.025 max. [F1, F5] W.V.: 25V min. : 0.05 max. (CF0.1F) : 0.09 max. (CU0.1F) W.V.: 16/10V: 0.125 max. W.V.: 6.3V: 0.15 max. I.R. More than 10,000M or 500 * F (whichever is smaller) Dielectric Strength No defects Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 2705C for 100.5 seconds. Set at room temperature for 242 hours, then measure. *Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then set at room temperature for 242 hours. Perform the initial measurement. *Preheating for GRM32/43/55 Step 1 2 Temperature 100 to 120C 170 to 200C Time 1 min. 1 min. Appearance No defects or abnormalities Capacitance Change Within 2.5% or 0.25pF (whichever is larger) Temperature 15 Cycle Q/D.F. 30pF and over: QU1000 30pF and below: QU400+20C C: Nominal Capacitance (pF) For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series The measured and observed characteristics should satisfy the specifications in the following table. B1, B3, R1, R6, R7, C8: Within 7.5% F1, F5, E4: Within 20% [B1, B3, R6, R7, C8] W.V.: 100V : 0.025 max. (CF0.068F) : 0.05 max. (CU0.068F) W.V.: 50/35/25V: : 0.025 max.* *GRM32D R7/R6/C8 1E106: 0.035 max. W.V.: 16/10V: 0.035 max. W.V.: 6.3/4V : 0.05 max. (CF3.3F) : 0.1 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.05 max. [F1, F5] W.V.: 25V min. : 0.05 max. (CF0.1F) : 0.09 max. (CU0.1F) W.V.: 16/10V: 0.125 max. W.V.: 6.3V: 0.15 max. I.R. More than 10,000M or 500 * F (whichever is smaller) Dielectric Strength No defects Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments shown in the following table. Set for 242 hours at room temperature, then measure. Step 1 2 3 4 Min. Max. Room Room Temp. (C) Operating Operating Temp. Temp. Temp. +0/-3 Temp. +3/-0 Time (min.) 2 to 3 2 to 3 303 303 *Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then set at room temperature for 242 hours. Perform the initial measurement. Product Information Continued on the following page. 54 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. No. Item (Note 1) These Specifications and Test Methods indicate typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). Specifications Temperature High Dielectric Type Compensating Type For General GRM Series GRM GRM Series Specifications and Test (1) (Note 1)-Typical Inspection Series Specifications and Methods Test Methods (1) (Note 1)-Typical Inspection Test Method Capacitance Change Within 5% or 0.5pF (whichever is larger) Humidity 16 (Steady State) Q/D.F. 30pF and over: QU350 10pF and over 30pF and below: QU275+2.5C 10pF and below: QU200+10C C: Nominal Capacitance (pF) I.R. B1, B3, R1, R6, R7, C8: Within 12.5% F1, F5, E4: Within 30% [R6, R7, C8] W.V.: 100V : 0.05 max. (CF0.068F) : 0.075 max. (CU0.068F) W.V.: 50/35/25/16/10V : 0.05 max. W.V.: 6.3/4V : 0.075 max. (CF3.3F) : 0.125 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.05 max. [F1, F5] W.V.: 25V min. : 0.075 max. (CF0.1F) : 0.125 max. (CU0.1F) W.V.: 16/10V: 0.15 max. W.V.: 6.3V: 0.2 max. Set the capacitor at 402C and in 90 to 95% humidity for 50012 hours. Remove and set for 242 hours at room temperature, then measure. Low ESL LLp Series No defects or abnormalities High-Q GJM Series Appearance Array GNM Series The measured and observed characteristics should satisfy the specifications in the following table. More than 1,000M or 50 * F (whichever is smaller) The measured and observed characteristics should satisfy the specifications in the following table. Within 7.5% or 0.75pF (whichever is larger) Humidity Load C: Nominal Capacitance (pF) I.R. [B1, B3, R6, R7, C8] W.V.: 100V : 0.05 max. (CF0.068F) : 0.075 max. (CU0.068F) W.V.: 50/35/25/16/10V : 0.05 max. W.V.: 6.3/4V : 0.075 max. (CF3.3F) : 0.125 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.05 max. [F1, F5] W.V.: 25V min. : 0.075 max. (CF0.1F) : 0.125 max. (CU0.1F) W.V.: 16/10V: 0.15 max. W.V.: 6.3V: 0.2 max. Apply the rated voltage at 402C and 90 to 95% humidity for 50012 hours. Remove and set for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. *Initial measurement for F1, F5/10V max. Apply the rated DC voltage for 1 hour at 402C. Remove and set for 242 hours at room temperature. Perform initial measurement. More than 500M or 25 * F (whichever is smaller) For Bonding GMD Series Q/D.F. 30pF and over: QU200 30pF and below: QU100+10C/3 B1, B3, R1, R6, R7, C8: Within 12.5% F1, F5, E4: Within 30% [W.V.: 10V max.] F1, F5: Within +30/-40% High Frequency GQM Series Capacitance Change Monolithic Microchip GMA Series No defects or abnormalities Continued on the following page. Product Information 17 Appearance 55 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Series Specifications and Methods Test Methods (1) (Note 1)-Typical Inspection GRM GRM Series Specifications and Test (1) (Note 1)-Typical Inspection Continued from the preceding page. No. (Note 1) These Specifications and Test Methods indicate typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). Specifications Temperature High Dielectric Type Compensating Type Item Test Method The measured and observed characteristics should satisfy the specifications in the following table. Low ESL LLp Series Array GNM Series Appearance Capacitance Change High 18 Temperature Load Q/D.F. High-Q GJM Series High Frequency GQM Series Monolithic Microchip GMA Series Within 3% or 0.3pF (whichever is larger) 30pF and over: QU350 10pF and over 30pF and below: QU275+2.5C 10pF and below: QU200+10C C: Nominal Capacitance (pF) I.R. B1, B3, R1, R6, R7, C8: Within 12.5% F1, F5, E4: Within 30% [Except 10V max. and. CU1.0F] F1, F5: Within +30/-40% [10V max. and CU1.0F] [B1, B3, R6, R7, C8] W.V.: 100V : 0.05 max. (CF0.068F) : 0.075 max. (CU0.068F) W.V.: 50/35/25/16/10V : 0.05 max. W.V.: 6.3/4V : 0.075 max. (CF3.3F) : 0.125 max. (CU3.3F) [E4] W.V.: 25Vmin: 0.05 max. [F1, F5] W.V.: 25V min. : 0.075 max.(CF0.1F) : 0.125 max.(CU0.1F) W.V.: 16/10V: 0.15 max. W.V.: 6.3V: 0.2 max. Apply 200%* of the rated voltage at the maximum operating temperature 3C for 100012 hours. Set for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. *Initial measurement for high dielectric constant type. Apply 200% of the rated voltage* at the maximum operating temperature 3C for one hour. Remove and set for 242 hours at room temperature. Perform initial measurement. *GRM155C81E 683/104, GRM188C81E105, GRM188C81E105, GRM21BR71H105, GRM21BR72A474, GRM21BR71C225, GRM31CR71H475, GRM32E R6/R7 YA106, GRM32D R7/R6/C8 1E106 : 150% of the rated voltage. More than 1,000M or 50 * F (whichever is smaller) Table A-1 (1) Char. 5C 6C 6P 6R 6S 6T 7U 1X Nominal Values (ppm/C)*1 030 060 -15060 -22060 -33060 -47060 -750120 +350 to -1000 -55 Max. 0.58 0.87 2.33 3.02 4.09 5.46 8.78 - Min. -0.24 -0.48 0.72 1.28 2.16 3.28 5.04 - Capacitance Change from 25C (%) -30 Max. Min. 0.40 -0.17 0.59 -0.33 1.61 0.50 2.08 0.88 2.81 1.49 3.75 2.26 6.04 3.47 - - -10 Max. 0.25 0.38 1.02 1.32 1.79 2.39 3.84 - Min. -0.11 -0.21 0.32 0.56 0.95 1.44 2.21 - *1: Nominal values denote the temperature coefficient within a range of 25C to 125C (for C)/85C (for other TC). (2) Char. 2C 3C 4C 2P 3P 4P 2R 3R 4R 2S 3S 4S 2T 3T 4T 3U 4U For Bonding GMD Series Product Information No defects or abnormalities Nominal Values (ppm/C)*2 060 0120 0250 -15060 -150120 -150250 -22060 -220120 -220250 -33060 -330120 -330250 -47060 -470120 -470250 -750120 -750250 -55 Max. 0.82 1.37 2.56 - - - - - - - - - - - - - - Min. -0.45 -0.90 -1.88 - - - - - - - - - - - - - - Capacitance Change from 20C (%) -25 Max. Min. 0.49 -0.27 0.82 -0.54 1.54 -1.13 1.32 0.41 1.65 0.14 2.36 -0.45 1.70 0.72 2.03 0.45 2.74 -0.14 2.30 1.22 2.63 0.95 3.35 0.36 3.07 1.85 3.40 1.58 4.12 0.99 4.94 2.84 5.65 2.25 *2: Nominal values denote the temperature coefficient within a range of 20C to 125C (for C)/85C (for other TC). 56 -10 Max. 0.33 0.55 1.02 0.88 1.10 1.57 1.13 1.35 1.83 1.54 1.76 2.23 2.05 2.27 2.74 3.29 3.77 Min. -0.18 -0.36 -0.75 0.27 0.09 -0.30 0.48 0.30 -0.09 0.81 0.63 0.24 1.23 1.05 0.66 1.89 1.50 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Test Method B1, B3, F1: -25 to +85C R1, R7, C7, D7, E7: -55 to +125C C6, R6: -55 to +85C F5: -30 to +85C C8, D8: -55 to +105C, Reference temperature: 25C (B1, B3, R1, F1: 20C) 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimensions Using calipers (GRM02 size is based on Microscope) 5 Dielectric Strength No defects or abnormalities No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 50 * F The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at reference temperature and 75%RH max. and within 1 minutes of charging, provided the charge/discharge current is less than 50mA. Capacitance Within the specified tolerance *Table 1 GRM022 B3/R6 GRM155 B3/R6 GRM185 B3/R6 GRM185 C8/D7 GRM188 B3/R6 GRM188 R7/C8 GRM188 B3/R6 GRM219 B3/R6 GRM219 C8 GRM219 B3/R6 GRM21B B3/R6 GRM21B R7/C8 GRM319 B3/R6 GRM188C80E106: Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. Monolithic Microchip GMA Series Dissipation Factor (D.F.) Nominal Capacitance Measuring Frequency Measuring Voltage 10.1kHz CV10F (10V min.)* 1.00.2Vrms 10.1kHz CV10F (6.3V max.) 0.50.1Vrms CG10F 12024Hz 0.50.1Vrms 10.1kHz *For items in Table1 0.50.1Vrms Continued on the following page. For Bonding GMD Series 8 B1, B3, R1, *R6, *R7, C7, C8, E7, D7: 0.1 max. C6: 0.125 max. D8: 0.15 max. F1, F5: 0.2 max. *GRM31CR71E106: 0.125 max. GRM31CR6 0J/0G 107: 0.15 max. The capacitance/D.F. should be measured at reference temperature at the measuring frequency and voltage shown in the table. Product Information 7 1A 681 to 103 1A 124 to 105 1C/1A 105 1A 105 1C/1A 225 1A 225 1A 335 1C/1A 475 1A 475 1A 106 1C/1A 106 1A 106 1C/1A 106 Array GNM Series Operating Temperature Range Specifications Low ESL LLp Series 1 Item High-Q GJM Series No. High Frequency GQM Series (Note 1) These Specifications and Test Methods indicate typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). For General GRM Series GRM GRM Series Specifications and Test (2) (Note 1)-Typical Inspection Series Specifications and Methods Test Methods (2) (Note 1)-Typical Inspection 57 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. No. Item Array GNM Series For General GRM Series Series Specifications and Methods Test Methods (2) (Note 1)-Typical Inspection GRM GRM Series Specifications and Test (2) (Note 1)-Typical Inspection No bias (Note 1) These Specifications and Test Methods indicate typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). Specifications B1, B3 F1 R6 R1, R7 F5 C6 C7 C8 D7 E7 D8 Test Method : Within 10% (-25 to +85C) : Within +30/-80% (-25 to +85C) : Within 15% (-55 to +85C) : Within 15% (-55 to +125C) : Within +22/-82% (-30 to +85C) : Within 22% (-55 to +85C) : Within 22% (-55 to +125C) : Within 22% (-55 to +105C) : Within +22/-33% (-55 to +125C) : Within +22/-56% (-55 to +125C) : Within +22/-33% (-55 to +105C) The capacitance change should be measured after 5 min. at each specified temp. stage. The ranges of capacitance change compared with the reference temperature value over the temperature ranges shown in the table should be within the specified ranges.* In case of applying voltage, the capacitance change should be measured after 1 more min. with applying voltage in equilibration of each temp. stage. *GRM32DR60J226, GRM43 B1/B3/R6 0J/1A 336/476: 1.00.2Vrms GRM155B30G475, GRM155B30J 225, GRM21BB30J476, GRM155R60E106, GRM188 B3/R6 0E/0G/0J 226: 0.20.05Vrms Step Low ESL LLp Series 1 9 Capacitance Temperature Characteristics 2 3 4 50% of B1: Within +10/-30% the Rated R1: Within +15/-40% Voltage F1: Within +30/-95% 5 High-Q GJM Series 6 7 8 High Frequency GQM Series *Initial measurement for high dielectric constant type Perform a heat treatment at 150 +0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. No removal of the terminations or other defects should occur. Monolithic Microchip GMA Series a Adhesive Strength of Termination b c 10 For Bonding GMD Series Temperature (C) Applying Voltage (V) 252 (for R6, R7, C6, C7, C8, D7, D8, E7, F5) 202 (for B1, B3, F1, R1) -553 (for R1, R6, R7, C6, C7, C8, D7, D8, E7) -303 (for F5) -253 (for B1, B3, F1) No bias 252 (for R6, R7, C6, C7, C8, D7, D8, E7, F5) 202 (for B1, B3, F1, R1) 1253 (for R1, R7, C7, D7, E7) 1053 (for C8, D8) 853 (for B1, B3, F1, F5, R6, C6) 202 (for B1, F1, R1) -553 (for R1) -253 (for B1, F1) 50% of the rated voltage 202 (for B1, F1, R1) 1253 (for R1) 853 (for B1, F1) Solder resist Baked electrode or copper foil Fig. 1a Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. B1, B3, R1, *R6, *R7, C7, C8, E7, D7: 0.1 max. C6: 0.125 max. D8: 0.15 max. F1, F5: 0.2 max. *GRM31CR71E106: 0.125 max. GRM31CR6 0J/0G 107: 0.15 max. 11 Vibration Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 1a using a eutectic solder. Then apply 10N* force in parallel with the test jig for 101sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *1N: GRM02, 2N: GRM03, 5N: GRM15/GRM18 Type GRM02 GRM03 GRM15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55 a 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 Solder the capacitor on the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Product Information Continued on the following page. 58 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Item Specifications Appearance No marking defects Capacitance Change Within 10% Test Method Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 2a using a eutectic solder. Then apply a force in the direction shown in Fig. 3a for 51 sec. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. b c 50 Pressurizing speed: 1.0mm/sec. Pressurize R230 40 20 WX\(c)T,QRVW(c)[SX(R),]^|YZU_\ Z[_^ o4.5 a 100 12 Deflection t: 1.6mm Fig.3a a 0.2 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 b 0.56 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 c 0.23 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 (in mm) Resistance to 14 Soldering Heat Temperature 15 Sudden Change 75% of the terminations is to be soldered evenly and continuously. Appearance No defects or abnormalities Capacitance Change B1, B3, R1, *R6, R7, C6, C7, *C8, E7, D7, D8: Within 7.5% F1, F5: Within 20% *GRM188R6 0J/0G 106, GRM188C8 0E/0G 106, GRM219R60G226: Within 12.5% GRM155R60G475, GRM155R60E106, GRM188R60G226: Within 15% D.F. B1, B3, R1, *R6, *R7, C7, C8, E7, D7: 0.1 max. C6: 0.125 max. D8: 0.15 max. F1, F5: 0.2 max. *GRM31CR71E106: 0.125 max. GRM31CR6 0J/0G 107: 0.15 max. I.R. More than 50 * F Dielectric Strength No defects Appearance No defects or abnormalities Capacitance Change B1, B3, R1, R6, R7, C6, C7, C8, D7, D8: Within 7.5% E7: Within 30% F1, F5: Within 20% D.F. B1, B3, R1, *R6, *R7, C7, C8, E7, D7: 0.1 max. C6: 0.125 max. D8: 0.15 max. F1, F5: 0.2 max. *GRM31CR71E106: 0.125 max. GRM31CR6 0J/0G 107: 0.15 max. I.R. More than 50 * F Dielectric Strength No defects Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in a eutectic solder* or Sn-3.0Ag-0.5Cu solder solution at 2705C for 100.5 seconds. Set at room temperature for 242 hours, then measure. *Do not apply to GRM02. *Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then set at room temperature for 242 hours. Perform the initial measurement. Monolithic Microchip GMA Series Solderability of Termination *Preheating for GRM32/43/55 Step 1 2 Temperature 100 to 120C 170 to 200C Time 1 min. 1 min. Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments shown in the following table. Set for 242 hours at room temperature, then measure. For Bonding GMD Series 13 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in a eutectic solder solution for 20.5 seconds at 2305C or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. High-Q GJM Series Capacitance meter 45 45 (GRM02/03/15: t: 0.8mm) Type GRM02 GRM03 GRM15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55 High Frequency GQM Series Flexure : V1 Low ESL LLp Series Fig. 2a Step 1 2 3 4 Min. Max. Room Room Temp. (C) Operating Operating Temp. Temp. Temp. +0/-3 Temp. +3/-0 Time (min.) 2 to 3 2 to 3 303 303 *Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then set at room temperature for 242 hours. Perform the initial measurement. GRM188R60J106 only Measurement after test Perform a heat treatment and then let sit for 242 hours at room temperature, then measure. Continued on the following page. 59 Product Information No. Array GNM Series (Note 1) These Specifications and Test Methods indicate typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). For General GRM Series GRM GRM Series Specifications and Test (2) (Note 1)-Typical Inspection Series Specifications and Methods Test Methods (2) (Note 1)-Typical Inspection PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. No. Item High Temperature 16 High Humidity (Steady) 17 Durability (Note 1) These Specifications and Test Methods indicate typical inspection. Please refer to individual specifications (our product specifications or the approval sheet). When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2). Specifications Test Method Appearance No defects or abnormalities Capacitance Change B1, B3, R1, R6, R7, C6, C7, C8, E7, D7, D8: Within 12.5% F1, F5: Within 30% D.F. B1, B3, R1, R6, R7, C6, C7, *C8, E7, D7, D8: 0.2 max. F1, F5: 0.4 max. *GRM319C81A106, GRM31MC81A106: 0.125 max. I.R. More than 12.5 * F Appearance No defects or abnormalities Capacitance Change B1, B3, R1, *R6, R7, C6, C7, *C8, E7, D7, D8: Within 12.5% F1, F5: Within 30% *GRM188C8 0E/0G 106, GRM219R60G226: within 15% D.F. B1, B3, R1, R6, R7, C6, C7, *C8, E7, D7, D8: 0.2 max. F1, F5: 0.4 max. *GRM319C81A106, GRM31MC81A106: 0.125 max. I.R. More than 25 * F Apply the rated voltage at 402C and 90 to 95% humidity for 50012 hours. The charge/discharge current is less than 50mA. *Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. *Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Apply 150%* of the rated voltage for 100012 hours at the maximum operating temperature 3C. Let sit for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. * Part Numbers with # have individual specification. As for these Part Numbers, please refer to table A. *Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. *Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Table A Part Number GRM155C80J684KE15D GRM155C80J684ME15D GRM188C80G106ME47D GRM21BC80J226ME51L GRM319D71C475KA12D GRM319D71C475MA12D Dimension LZW (mm) 1.0Z0.5 1.0Z0.5 1.6Z0.8 2.0Z1.25 3.2Z1.6 3.2Z1.6 Temp. Char. Part Numbers of table A are designed for use in the circuits where continuous applied voltage to the capacitor is derated than rated voltage. These Part Numbers guarantee Durability Test with 100% x rated voltage as testing voltage at the maximum operating temperature. The following voltage and temperature derating conditions are recommended for use to ensure the same reliability level as normal specification. X6S X6S X6S X6S X7T X7T Rated Volt. (Vdc) 6.3 6.3 4 6.3 16 16 Cap. Tol (%) 10% 20% 20% 20% 10% 20% Spec. Test Methods (2) (2) (2) (2) (2) (2) 100 Product for 125C 80 Product for 105C Product for 85C 60 40 20 0 25 50 75 100 Product Information Temperature at Product (C) 60 Applied Testing Voltage at Durability Rated Volt. Z100% Rated Volt. Z100% Rated Volt. Z100% Rated Volt. Z100% Rated Volt. Z100% Rated Volt. Z100% 120 0 For Bonding GMD Series Capacitance (F) 0.68 0.68 10 22 4.7 4.7 * Recommended Derating Conditions on Voltage and Temperature Ratio [Operating Voltage/Rated Voltage (%)] Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series For General GRM Series Series Specifications and Methods Test Methods (2) (Note 1)-Typical Inspection GRM GRM Series Specifications and Test (2) (Note 1)-Typical Inspection 125 150 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Data Capacitance - Temperature Characteristics Measuring condition: 5C *** 1MHz, R *** 1kHz 20 5C R6 R7 10 10 5 0 -5 -10 0 -10 -20 5C R -30 -15 -40 -40 -20 0 20 40 60 Temperature (C) 80 100 120 10 140 100 1000 10000 Time (Hr) Low ESL LLp Series -20 -60 Array GNM Series Capacitance Change (%) 15 Capacitance Change (%) Capacitance Change - Aging Measuring condition: 5C *** 1MHz, R *** 1kHz 20 For General GRM Series GRM Series Data Impedance - Frequency Characteristics 5C: GRM15 R: GRM15 100 100 10 1 1pF 10pF 1 1000pF 0.1 0.01F 100pF 0.1 High-Q GJM Series Impedance () Impedance () 10 0.01 0.1F 1000pF 1 10 100 Frequency (MHz) 1000 10000 10 100 0.001 0.1 1 10 Frequency (MHz) 100 1000 High Frequency GQM Series 0.01 R 100 GRM15 1F Monolithic Microchip GMA Series 1 GRM18 10F 0.1 0.01 0.001 0.01 GRM31 100F 0.1 1 Frequency (MHz) For Bonding GMD Series Impedance () 10 The data herein are given in typical values, not guaranteed ratings. Continued on the following page. Continued on the following page. Product Information Please refer to our Web site or contact our sales representatives for individual Part Number's data. Our Web Site: http://www.murata.com/products/capacitor/tech_data/ 61 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series GRM Series Data Continued from the preceding page. Capacitance - DC Voltage Characteristics Temperature Compensating Type: GRM1555C1H102JA01 High Dielectric Constant Type: GRM155R71E103KA01 Measuring condition: 1MHz 20 0 Capacitance Change (%) Array GNM Series Capacitance Change (%) 0 -20 -40 -60 -80 Low ESL LLp Series 10 20 30 40 DC Voltage (VDC) 50 0 6 8 10 12 14 16 DC Voltage (VDC) 18 20 22 24 26 Measuring condition: 1kHz 0 Capacitance Change (%) Capacitance Change (%) 4 20 0 -20 -40 -60 -20 -40 -60 -80 -80 -100 -100 0 2 4 6 8 10 12 DC Voltage (VDC) 14 16 18 High Dielectric Constant Type: GRM188R60J106ME47 0 1 2 3 4 5 6 7 DC Voltage (VDC) 8 9 10 11 High Dielectric Constant Type: GRM31CR60J107ME39 Measuring condition: 1kHz 20 Measuring condition: 120Hz 20 0 Capacitance Change (%) 0 Capacitance Change (%) 2 High Dielectric Constant Type: GRM155R61A105KE15 Measuring condition: 1kHz 20 High-Q GJM Series -60 60 High Dielectric Constant Type: GRM155R71C104KA88 High Frequency GQM Series -40 -100 0 Monolithic Microchip GMA Series -20 -80 -100 -20 -40 -60 -80 -20 -40 -60 -80 -100 -100 0 1 2 3 4 DC Voltage (VDC) 5 6 7 0 1 2 3 4 DC Voltage (VDC) 5 6 7 The data herein are given in typical values, not guaranteed ratings. Please refer to our Web site or contact our sales representatives for individual Part Number's data. Our Web Site: http://www.murata.com/products/capacitor/tech_data/ Product Information For Bonding GMD Series Measuring condition: 1kHz 20 62 Continued on the following page. Continued on the following page. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM Series Data For General GRM Series GRM Series Data Continued from the preceding page. Capacitance - AC Voltage Characteristics 20 10 10 -30 -30 -40 -40 -50 -50 -60 0.0 0.5 1.0 1.5 AC Voltage (Vr.m.s.) 2.0 -60 0.0 2.5 High Dielectric Constant Type: GRM155R71C104KA88 10 Capacitance Change (%) 20 10 -10 -20 -30 -30 -50 2.0 -60 0.0 2.5 High Dielectric Constant Type: GRM188R60J106ME47 10 Capacitance Change (%) 20 10 -10 -20 -30 -20 -30 -40 -50 1.0 1.5 AC Voltage (Vr.m.s.) 2.0 2.5 2.5 0 -50 0.5 2.0 -10 -40 -60 0.0 1.0 1.5 AC Voltage (Vr.m.s.) Measuring condition: 120Hz 30 20 0 0.5 High Dielectric Constant Type: GRM31CR60J107ME39 Measuring condition: 1kHz 30 Measuring condition: 1kHz -20 -40 1.0 1.5 AC Voltage (Vr.m.s.) 2.5 0 -50 0.5 2.0 -10 -40 -60 0.0 1.0 1.5 AC Voltage (Vr.m.s.) 30 20 0 0.5 High Dielectric Constant Type: GRM155R61A105KE15 Measuring condition: 1kHz 30 Capacitance Change (%) -20 High-Q GJM Series -20 0 -10 High Frequency GQM Series -10 Array GNM Series Capacitance Change (%) Capacitance Change (%) 20 0 Measuring condition: 1kHz 30 Low ESL LLp Series Measuring condition: 1MHz 30 Capacitance Change (%) High Dielectric Constant Type: GRM155R71E103KA01 Monolithic Microchip GMA Series Temperature Compensating Type: GRM1555C1H102JA01 -60 0.0 0.5 1.0 1.5 AC Voltage (Vr.m.s.) 2.0 2.5 For Bonding GMD Series The data herein are given in typical values, not guaranteed ratings. Product Information Please refer to our Web site or contact our sales representatives for individual Part Number's data. Our Web Site: http://www.murata.com/products/capacitor/tech_data/ 63 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Capacitor Array GNM Series Array GNM Series Features 1. High density mounting due to mounting space saving 2. Mounting cost saving Applications General electronic equipment L Part Number GNM0M2 GNM1M2 GNM212 Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series GNM214/314 P 64 T T Low ESL LLp Series GNM0M2/1M2/212 P W Dimensions (mm) W T P L 0.6 0.05 0.45 0.05 0.45 0.05 0.9 0.05 0.5 +0.05/-0.10 0.6 0.1 0.64 0.05 1.37 0.15 1.0 0.15 0.8 +0/-0.15 0.6 0.1 1.0 0.1 2.0 0.15 1.25 0.15 0.85 0.1 L Part Number L GNM214 2.0 0.15 GNM314 3.2 0.15 Dimensions (mm) W T 0.5 +0.05/-0.1 1.25 0.15 0.6 0.1 0.85 0.1 0.8 0.1 0.85 0.1 1.6 0.15 1.0 0.1 1.15 0.1 W P 0.5 0.05 0.8 0.1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Temperature Compensating Type C0G(5C) Characteristics ex.0.6: T Dimension [mm] 3.2x1.6 (31) <1206> 4(4) Number of Elements 2(2) Rated Voltage [Vdc] Capacitance 50 (1H) 50 (1H) 100 (2A) 50 (1H) 10pF(100) 0.6 0.6 0.8 0.8 15pF(150) 0.6 0.6 0.8 0.8 22pF(220) 0.6 0.6 0.8 0.8 33pF(330) 0.6 0.6 0.8 0.8 47pF(470) 0.6 0.6 0.8 0.8 68pF(680) 0.6 0.6 0.8 0.8 100pF(101) 0.6 0.6 0.8 0.8 150pF(151) 0.6 0.6 0.8 0.8 220pF(221) 0.6 0.6 Array GNM Series LxW 1.37x1.0 2.0x1.25 (1M) (21) [mm] <0504> <0805> Low ESL LLp Series 0.6 0.8 330pF(331) 0.8 The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics 1.37x1.0 (1M) <0504> 2(2) LxW [mm] Number of Elements 50 (1H) 25 (1E) 16 (1C) 4(4) 10 (1A) 470pF(471) 1000pF(102) 3.2x1.6 (31) <1206> 2.0x1.25 (21) <0805> 50 (1H) 25 (1E) 16 (1C) 50 (1H) 25 (1E) 16 (1C) 6.3 (0J) 0.6 0.6 0.6 2200pF(222) 0.6 0.6 4700pF(472) 0.6 0.6 10000pF(103) 0.6 High Frequency GQM Series Rated Voltage [Vdc] Capacitance High-Q GJM Series ex.0.6: T Dimension [mm] 0.6 22000pF(223) 0.6 0.6 0.85 47000pF(473) 0.6 0.6 0.85 0.85 0.10F(104) 0.6 0.6 0.85 0.85 1.0 0.85 1.0F(105) 1.0 Monolithic Microchip GMA Series 0.6 1.15 The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code High Dielectric Constant Type X7R(R7) Characteristics-Low Profile 0.5 ex.0.5: T Dimension [mm] Number of Elements 2(2) 4(4) Rated Voltage [Vdc] Capacitance 16 (1C) 16 (1C) 0.5 0.5 0.10F(104) For Bonding GMD Series LxW 1.37x1.0 2.0x1.25 (1M) (21) [mm] <0504> <0805> Product Information The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 65 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table High Dielectric Constant Type X5R(R6) Characteristics 0.6 ex.0.6: T Dimension [mm] 0.9x0.6 (0M) <0302> LxW [mm] 1.37x1.0 (1M) <0504> 2(2) Rated Voltage [Vdc] Capacitance 16 (1C) 10 (1A) 6.3 (0J) 4 (0G) 1000pF(102) 50 (1H) 25 (1E) 4(4) 16 (1C) 10 (1A) 6.3 (0J) 0.45 0.45 0.45 22000pF(223) 0.45 0.45 0.45 0.6 0.6 47000pF(473) 0.45 0.45 0.45 0.6 0.6 0.10F(104) 0.45 0.45 0.45 0.45 The part number code is shown in ( ) and Unit is shown in [ ]. 0.8 0.8 0.8 0.8 0.8 < >: EIA [inch] Code High-Q GJM Series High Dielectric Constant Type X5R(R6) Characteristics-Low Profile ex.0.5: T Dimension [mm] Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series 1.37x1.0 (1M) <0504> 2(2) 2.0x1.25 (21) <0805> 4(4) 16 (1C) 10 (1A) 10 (1A) 0.5 0.5 0.5 The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code 66 16 (1C) 10 (1A) 0.85 0.85 0.85 0.85 0.6 2.2F(225) 1.0F(105) 6.3 (0J) 0.85 1.0F(105) Rated Voltage [Vdc] 10 (1A) 0.8 0.47F(474) Capacitance 6.3 (0J) 0.6 0.22F(224) Number of Elements 10 (1A) 0.6 10000pF(103) LxW [mm] 16 (1C) 0.6 4700pF(472) 0.5 3.2x1.6 (31) <1206> 2.0x1.25 (21) <0805> 0.6 2200pF(222) Low ESL LLp Series Array GNM Series Number of Elements 2.0x1.25 (21) <0805> 0.85 0.85 0.85 0.85 0.85 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1.37x1.0(1M)<0504> LxW [mm] Rated Volt. [Vdc] 3.2x1.6(31)<1206> 4(4) 50(1H) 50(1H) 50(1H) Part Number 10pF(100) 10%(K) GNM1M25C1H100KD01D GNM2145C1H100KD01D GNM3145C2A100KD01D GNM3145C1H100KD01D 15pF(150) 10%(K) GNM1M25C1H150KD01D GNM2145C1H150KD01D GNM3145C2A150KD01D GNM3145C1H150KD01D 22pF(220) 10%(K) GNM1M25C1H220KD01D GNM2145C1H220KD01D GNM3145C2A220KD01D GNM3145C1H220KD01D 33pF(330) 10%(K) GNM1M25C1H330KD01D GNM2145C1H330KD01D GNM3145C2A330KD01D GNM3145C1H330KD01D 47pF(470) 10%(K) GNM1M25C1H470KD01D GNM2145C1H470KD01D GNM3145C2A470KD01D GNM3145C1H470KD01D 68pF(680) 10%(K) GNM1M25C1H680KD01D GNM2145C1H680KD01D GNM3145C2A680KD01D GNM3145C1H680KD01D 100pF(101) 10%(K) GNM1M25C1H101KD01D GNM2145C1H101KD01D GNM3145C2A101KD01D GNM3145C1H101KD01D 150pF(151) 10%(K) GNM1M25C1H151KD01D GNM2145C1H151KD01D GNM3145C2A151KD01D GNM3145C1H151KD01D 220pF(221) 10%(K) GNM1M25C1H221KD01D GNM2145C1H221KD01D 330pF(331) 10%(K) GNM3145C1H221KD01D GNM3145C1H331KD01D The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series Tolerance 100(2A) < >: EIA [inch] Code Low ESL LLp Series Capacitance 2.0x1.25(21)<0805> 2(2) Number of Elements For General GRM Series Temperature Compensating Type C0G(5C) Characteristics High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics 1.37x1.0(1M)<0504> LxW [mm] 16(1C) 10(1A) Part Number 1000pF(102) 20%(M) 2200pF(222) 20%(M) GNM1M2R71E222MA01D 4700pF(472) 20%(M) GNM1M2R71E472MA01D 10000pF(103) 20%(M) GNM1M2R71E103MA01D 22000pF(223) 20%(M) GNM1M2R71C223MA01D GNM1M2R71A223MA01D 47000pF(473) 20%(M) GNM1M2R71C473MA01D GNM1M2R71A473MA01D 0.10F(104) 20%(M) GNM1M2R71C104MA01D GNM1M2C71A104MA01D GNM1M2R71H102MA01D 2.0x1.25(21)<0805> LxW [mm] 4(4) Number of Elements 25(1E) Part Number 470pF(471) 20%(M) GNM214R71H471MA01D 1000pF(102) 20%(M) GNM214R71H102MA01D 2200pF(222) 20%(M) GNM214R71E222MA01D 4700pF(472) 20%(M) GNM214R71E472MA01D 10000pF(103) 20%(M) GNM214R71E103MA01D 22000pF(223) 20%(M) GNM214R71C223MA01D 47000pF(473) 20%(M) GNM214R71C473MA01D 0.10F(104) 20%(M) GNM214R71C104MA01D For Bonding GMD Series Tolerance 16(1C) Monolithic Microchip GMA Series 50(1H) Rated Volt. [Vdc] Capacitance 3.2x1.6(31)<1206> LxW [mm] 4(4) Number of Elements 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) 6.3(0J) Part Number 47000pF(473) 20%(M) GNM314R71H473MA11D 0.10F(104) 20%(M) GNM314R71H104MA11D 1.0F(105) 20%(M) GNM314R71C473MA01L GNM314R71E104MA11D GNM314R71C104MA01L GNM314R70J105MA01L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GNM series Specifications and Test Method (2). (Part Number) GN q M 1M w High Frequency GQM Series Tolerance e 2 5C 1H r t y 100 K u i D01 D o !0 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) rNumber of Elements yRated Voltage uCapacitance oIndividual Specification Code !0Packaging Packaging Code in Part Number shows STD 180mm Reel Taping. 67 Product Information Capacitance 25(1E) 50(1H) Rated Volt. [Vdc] High-Q GJM Series 2(2) Number of Elements PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X7R(R7) Characteristics-Low Profile 1.37x1.0(1M)<0504> LxW [mm] Number of Elements Rated Volt. [Vdc] Capacitance 4(4) 16(1C) 16(1C) Tolerance Part Number 20%(M) 0.10F(104) GNM1M2R71C104MAA1D The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series 2.0x1.25(21)<0805> 2(2) GNM214R71C104MAA1D < >: EIA [inch] Code High Dielectric Constant Type X5R(R6) Characteristics 0.9x0.6(0M)<0302> LxW [mm] 2(2) Number of Elements Low ESL LLp Series Rated Volt. [Vdc] Capacitance 16(1C) 10(1A) Tolerance 20%(M) GNM0M2R61C103ME18D* GNM0M2R61A103ME17D* GNM0M2R60J103ME17D* 22000pF(223) 20%(M) GNM0M2R61C223ME18D* GNM0M2R61A223ME17D* GNM0M2R60J223ME17D* 47000pF(473) 20%(M) GNM0M2R61C473ME18D* GNM0M2R61A473ME17D* GNM0M2R60J473ME17D* 0.10F(104) 20%(M) GNM0M2R61C104ME18D* GNM0M2R61A104ME17D* GNM0M2R60J104ME17D* 1.0F(105) 20%(M) GNM0M2R60G105ME17D* 1.37x1.0(1M)<0504> 50(1H) Rated Volt. [Vdc] Capacitance High Frequency GQM Series High-Q GJM Series 2(2) Number of Elements Monolithic Microchip GMA Series 25(1E) Tolerance 16(1C) Part Number 1000pF(102) 20%(M) 2200pF(222) 20%(M) GNM1M2R61E222MA01D 4700pF(472) 20%(M) GNM1M2R61E472MA01D 10000pF(103) 20%(M) GNM1M2R61E103MA01D 22000pF(223) 20%(M) 47000pF(473) 20%(M) GNM1M2R61C473MA01D 0.22F(224) 20%(M) GNM1M2R61C224ME18D* 1.0F(105) 20%(M) GNM1M2R61C105ME18D* GNM1M2R61H102MA01D GNM1M2R61C223MA01D 1.37x1.0(1M)<0504> LxW [mm] For Bonding GMD Series 4(0G) Part Number 10000pF(103) LxW [mm] Product Information 6.3(0J) 2(2) Number of Elements 10(1A) Rated Volt. [Vdc] Capacitance Tolerance 6.3(0J) Part Number 22000pF(223) 20%(M) GNM1M2R61A223MA01D 47000pF(473) 20%(M) GNM1M2R61A473MA01D 0.10F(104) 20%(M) GNM1M2R61A104MA01D 1.0F(105) 20%(M) GNM1M2R61A105ME17D* GNM1M2R60J105ME12D* 2.2F(225) 20%(M) GNM1M2R61A225ME18D* GNM1M2R60J225ME18D* 2.0x1.25(21)<0805> LxW [mm] 2(2) Number of Elements 16(1C) Rated Volt. [Vdc] Capacitance 10(1A) Tolerance 6.3(0J) Part Number 0.47F(474) 20%(M) GNM212R61C474MA16D 1.0F(105) 20%(M) GNM212R61C105MA16D 2.2F(225) 20%(M) GNM212R61A105MA13D GNM212R61A225ME16D* GNM212R60J225ME16D* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GNM series Specifications and Test Method (2). (Part Number) GN q M 1M w e 2 R7 1C r t y 104 M u i AA1 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 68 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) rNumber of Elements yRated Voltage uCapacitance oIndividual Specification Code !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2.0x1.25(21)<0805> LxW [mm] 4(4) Number of Elements 10(1A) Tolerance 1.0F(105) 20%(M) 2.2F(225) 20%(M) Part Number GNM214R61A105ME17D* 3.2x1.6(31)<1206> 4(4) Number of Elements 16(1C) Rated Volt. [Vdc] 1.0F(105) GNM214R60J105ME17D* GNM214R60J225ME18D* LxW [mm] Capacitance 6.3(0J) Array GNM Series Rated Volt. [Vdc] Capacitance For General GRM Series High Dielectric Constant Type X5R(R6) Characteristics Tolerance 20%(M) 10(1A) Part Number GNM314R61C105MA15D GNM314R61A105MA13D Low ESL LLp Series The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GNM series Specifications and Test Method (2). High Dielectric Constant Type X5R(R6) Characteristics-Low Profile 1.37x1.0(1M)<0504> 16(1C) Rated Volt. [Vdc] Capacitance 1.0F(105) Tolerance 20%(M) 2.0x1.25(21)<0805> 2(2) Number of Elements 4(4) 10(1A) 10(1A) High-Q GJM Series LxW [mm] Part Number GNM1M2R61C105MEA2D* GNM1M2R61A105MEA4D* GNM214R61A105MEA2D* Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GNM series Specifications and Test Method (2). 69 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). Specifications No. High-Q GJM Series Low ESL LLp Series Array GNM Series 1 Item Operating Temperature Range Test Method Temperature Compensating Type 5C: -55 to +125C High Dielectric Type R7, C7: -55 to +125C R6: -55 to +85C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimensions Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when 300% of the rated voltage (5C) or 250% of the rated voltage (R7) is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 10,000M or 500 * F (whichever is smaller) The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25C and 75%RH max. and within 2 minutes of charging. 7 Capacitance Within the specified tolerance 8 Q/ Dissipation Factor (D.F.) 30pF min.: QU1000 30pF max.: QU400+20C C: Nominal Capacitance (pF) Char. 25V min. 16V R7, R6, 0.025 0.035 max. C7 max. Char. R7 High Frequency GQM Series Within the Capacitance specified tolerance Change (Table A) R6 C7 Monolithic Microchip GMA Series 9 Temperature Coefficient Within the specified tolerance (Table A) Capacitance Drift Within 0.2% or 0.05pF (whichever is larger.) Capacitance Temperature Characteristics The capacitance/Q/D.F. should be measured at 25C at the frequency and voltage shown in the table. 10V 0.035 max. 6.3V 0.05 max. Temp. Reference Cap. Range Temp. Change -55C to +125C Within 15% -55C 25C to +85C Within -55C 22% to +125C Char. Item Frequency Voltage 5C R7 10.1MHz 0.5 to 5Vrms 10.1kHz 1.00.2Vrms The capacitance change should be measured after 5 min. at each specified temperature stage. (1) Temperature Compensating Type The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from steps 1 through 5, the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as in Table A. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in the steps 1, 3 and 5 by the cap. value in step 3. Step 1 2 3 4 5 Temperature (C) 252 -553 (for 5C/R7/C7), -303 (for F5) 252 1253 (for 5C/R7/C7), 853 (for F5) 252 (2) High Dielectric Constant Type The ranges of capacitance change compared with the above 25C value over the temperature ranges shown in the table should be within the specified ranges. For Bonding GMD Series * Initial measurement for high dielectric constant type. Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. No removal of the terminations or other defect should occur. GNMpp4 d Product Information 10 GNMpp2 b a c b a d Adhesive Strength of Termination c For General GRM Series GNM Series Specifications and Test Methods (1) Solder resist Copper foil Solder resist Copper foil Solder the capacitor to the test jig (glass epoxy board) shown in Fig.1 using a eutectic solder. Then apply 5N force in parallel with the test jig for 101 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. Type GNM1M2 GNM212 GNM214 GNM314 a 0.5 0.6 0.6 0.8 b 1.6 1.8 2.0 2.5 c 0.32 0.5 0.25 0.4 d 0.32 0.5 0.25 0.4 (in mm) Fig. 1 Continued on the following page. 70 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 Test Method Temperature Compensating Type High Dielectric Type Appearance No defects or abnormalities Capacitance Within the specified tolerance 11 Vibration Resistance Q/D.F. 30pF min.: QU1000 30pF max.: QU400+20C Char. 25V min. 16V R7, R6, 0.025 0.035 max. C7 max. C: Nominal Capacitance (pF) 10V 0.035 max. 6.3V 0.05 max. Appearance No marking defects Capacitance Within 5% or 0.5pF Change (whichever is larger) Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 2 using a eutectic solder. Then apply a force in the direction shown in Fig. 3 for 51 sec. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. Within 10% \ \_ 40 *GNMpp2 40 *GNMpp4 5.0 a b 12 Deflection Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). 100 5.0 a b c 1.0 c d Type GNM1M2 GNM212 GNM214 GNM314 100 20 1.0 50 Pressurizing speed: 1.0mm/sec. Pressurize R230 d High-Q GJM Series Item t=0.8mm a 2.00.05 2.00.05 2.00.05 2.50.05 b 0.50.05 0.60.05 0.70.05 0.80.05 Array GNM Series Specifications No. Low ESL LLp Series When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). Continued from the preceding page. For General GRM Series GNM Series Specifications and Test Methods (1) GNM Series Specifications and Test Methods (1) c d 0.320.05 0.320.05 0.50.05 0.50.05 0.30.05 0.20.05 0.40.05 0.40.05 (in mm) Flexure : V1 Capacitance meter 45 45 Fig. 3 13 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 20.5 seconds at 2305C or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Resistance to Soldering Heat The measured and observed characteristics should satisfy the specifications in the following table. High Frequency GQM Series Fig. 2 Q/D.F. 30pF min.: QU1000 30pF max.: QU400+20C C: Nominal Capacitance (pF) Char. 25V min. 16V R7, R6, 0.025 0.035 max. C7 max. 10V 0.035 max. I.R. More than 10,000M or 500 * F (whichever is smaller) Dielectric Strength No failure 6.3V 0.05 max. * Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. For Bonding GMD Series 14 Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 2705C for 100.5 seconds. Let sit at room temperature for 242 hours, then measure. R7, R6, C7: Within 7.5% Continued on the following page. Product Information Within 2.5% Capacitance or 0.25pF Change (whichever is larger) Monolithic Microchip GMA Series Appearance No marking defects 71 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 For General GRM Series GNM Series Specifications and Test Methods (1) Continued from the preceding page. When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). Specifications No. Item Temperature Cycle Temperature Compensating Type Test Method High Dielectric Type The measured and observed characteristics should satisfy the specifications in the following table. Array GNM Series Appearance No marking defects Within 2.5% Capacitance or 0.25pF Change (whichever is larger) R7, R6, C7: Within 7.5% Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 242 hours (temperature compensating type) or 484 hours (high dielectric constant type) at room temperature, then measure. Step 15 Q/D.F. 30pF min.: QU1000 30pF max.: QU400+20C Low ESL LLp Series C:Nominal Capacitance (pF) Char. 25V min. 16V R7, R6, 0.025 0.035 max. C7 max. 10V 0.035 max. I.R. More than 10,000M or 500 * F (whichever is smaller) Dielectric Strength No failure Humidity Steady State 6.3V 0.05 max. 1 Min. Temp. (C) Operating Temp.+0/-3 Time (min.) 303 2 Room Temp. 2 to 3 3 Max. Operating Temp. +3/-0 303 4 Room Temp. 2 to 3 * Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. The measured and observed characteristics should satisfy the specifications in the following table. Within 5% Capacitance or 0.5pF Change (whichever is larger) R7, R6, C7: Within 12.5% Set the capacitor at 402C and 90 to 95% humidity for 50012 hours. Remove and let sit for 242 hours at room temperature, then measure. Q/D.F. 30pF and over: QU350 10pF and over, 30pF and below: QU275+5C/2 10pF and below: QU200+10C C: Nominal Capacitance (pF) I.R. More than 1,000M or 50 * F (whichever is smaller) 16 High Frequency GQM Series High-Q GJM Series Appearance No marking defects Humidity Load Char. 25V min. R7, R6, 0.05 C7 max. 16V 0.05 max. 10V/6.3V 0.05 max. The measured and observed characteristics should satisfy the specifications in the following table. Monolithic Microchip GMA Series Appearance No marking defects Within 7.5% Capacitance or 0.75pF Change (whichever is larger) 17 Q/D.F. 30pF and over: QU200 30pF and below: QU100+10C/3 R7, R6, C7: Within 12.5% Char. 25V min. R7, R6, 0.05 C7 max. 16V 0.05 max. 10V/6.3V 0.05 max. Apply the rated voltage at 402C and 90 to 95% humidity for 50012 hours. Remove and let sit for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. C: Nominal Capacitance (pF) For Bonding GMD Series I.R. More than 500M or 25 * F (whichever is smaller) Product Information Continued on the following page. 72 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 Continued from the preceding page. When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). Specifications Item No. High Temperature Load Temperature Compensating Type Test Method High Dielectric Type For General GRM Series GNM Series Specifications and Test Methods (1) GNM Series Specifications and Test Methods (1) The measured and observed characteristics should satisfy the specifications in the following table. Apply 200% of the rated voltage for 100012 hours at the maximum operating temperature 3C. Let sit for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. R7, R6, C7: Within 12.5% Q/D.F. 30pF and over: QU350 10pF and over, 30pF and below: QU275+5C/2 10pF and below: QU200+10C C: Nominal Capacitance (pF) I.R. More than 1,000M or 50 * F (whichever is smaller) 18 Char. 25V min. R7, R6, 0.04 C7 max. 16V 0.05 max. 10V/6.3V 0.05 max. * Initial measurement for high dielectric constant type. Apply 200% of the rated DC voltage for one hour at the maximum operating temperature 3C. Remove and let sit for 242 hours at room temperature. Perform initial measurement. Low ESL LLp Series Within 3% Capacitance or 0.3pF Change (whichever is larger) Array GNM Series Appearance No marking defects Table A 5C Nominal Values (ppm/C) *1 030 -55C Max. 0.58 Min. -0.24 Capacitance Change from 25C (%) -30C Max. Min. 0.40 -0.17 -10C Max. 0.25 High-Q GJM Series Char. Min. -0.11 Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series *1: Nominal values denote the temperature coefficient within a range of 25 to 125C. 73 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 Low ESL LLp Series Array GNM Series For General GRM Series GNM Series Specifications and Test Methods (2) When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). No. Item 1 Operating Temperature Range Specifications Test Method R6: -55C to +85C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimension Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance 50 * F min. The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25C and 75%RH max. and within 1 minute of charging. 7 Capacitance Within the specified tolerance The capacitance/D.F. should be measured at 25C at the frequency and voltage shown in the table. Nominal Capacitance Measuring Frequency Measuring Voltage CV10F *1 (10V min.) 1.00.2Vrms 10.1kHz CV10F *2 (6.3V max.) 0.50.1Vrms 10.1kHz *1For items in Table1 0.50.1Vrms 10.1kHz *2For items in Table2 1.00.1Vrms 10.1kHz High-Q GJM Series 0.1 max.*3 8 Dissipation Factor (D.F.) Table 3 GNM0M2 GNM1M2 GNM1M2 GNM1M2 GNM212 GNM212 GNM214 R6 R6 R6 R6 R6 R6 R6 103/223/473/104 0J 105/225 1A 105MEA4 1A 225 0J 225 1A 225 0J 225 Table 1 GNM0M2 GNM0M2 GNM1M2 GNM1M2 104 104 105/225 224/105 High Frequency GQM Series The capacitance change should be measured after 5 min.at each specified temperature stage. Capacitance Temperature Characteristics Monolithic Microchip GMA Series 9 Char. Temp. Range R6 -55 to +85C Reference Temp. 25C Cap. Change Within 15% No removal of the terminations or other defects should occur. GNMpp4 a c c Adhesive Strength of Termination b a d 10 GNMpp2 b d For Bonding GMD Series 1A 1C 1A 1C Table 2 GNM0M2 R6 0J 103/223/473 GNM212 R6 0J 225 GNM214 R6 0J 105 *3 However 0.125 max. for Table 3 items. Solder resist Copper foil Solder resist Copper foil Fig. 1 Product Information R6 R6 R6 R6 Appearance No defects or abnormalities Capacitance Within the specified tolerance 11 Vibration D.F. 0.1 max.*3 *3 However 0.125 max. for Table 3 items. Step 1 2 3 4 5 Temperature (C) 252 -553 252 853 252 The ranges of capacitance change compared with the 25C value over the temperature ranges shown in the table should be within the specified ranges. * Initial measurement for high dielectric constant type. Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 1 using a eutectic solder. Then apply 5N (GNM0M2: 2N) force in parallel with the test jig for 101 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. Type GNM0M2 GNM1M2 GNM212 GNM214 GNM314 a 0.2 0.5 0.6 0.6 0.8 b 0.96 1.6 1.8 2.0 2.5 c 0.25 0.32 0.5 0.25 0.4 d 0.2 0.32 0.5 0.25 0.4 (in mm) Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Continued on the following page. 74 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 When no "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2). Specifications Test Method Appearance No marking defects Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 2 using a eutectic solder. Then apply a force in the direction shown in Fig. 3. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. Capacitance Within 10% Change 20 5.0 a b c 1.0 c d Type GNM0M2 GNM1M2 GNM212 GNM214 GNM314 d a 2.00.05 2.00.05 2.00.05 2.00.05 2.50.05 b 0.20.05 0.50.05 0.60.05 0.70.05 0.80.05 100 50 Pressurizing speed: 1.0mm/sec. Pressurize R230 1.0 Thickness: 0.8mm c 0.20.05 0.320.05 0.50.05 0.30.05 0.40.05 d 0.250.05 0.320.05 0.50.05 0.20.05 0.40.05 (in mm) Flexure : V1 Capacitance meter 45 45 Low ESL LLp Series 12 Deflection 100 Fig. 3 Fig. 2 13 Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 20.5 seconds at 2305C or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. Appearance No marking defects Resistance 14 to Soldering D.F. Heat I.R. 0.1 max. *3 *3 However 0.125 max. for Table 3 items. 50 * F min. Dielectric No failure Strength Appearance No marking defects 15 Temperature Cycle R6*5: Within 12.5% *5 GNM0M2R60G105, GNM0M2R60J103/223/473/104, Capacitance GNM0M2R61A103/223/473/104, Change GNM0M2R61C103/223/473/104, GNM1M2R61A105: Within 15% D.F. 0.1 max. * *3 However 0.125 max. for Table 3 items. I.R. 50 * F min. 3 Dielectric No failure Strength Appearance No marking defects High Temperature 16 High Humidity (Steady) Capacitance R6: Within 12.5% Change D.F. 0.2 max. I.R. 12.5 * F min. Appearance No marking defects Capacitance R6: Within 12.5% Change D.F. 0.2 max. I.R. 25 * F min. 17 Durability Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 2705C for 100.5 seconds. Let sit at room temperature for 242 hours, then measure. * Initial measurement Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. High Frequency GQM Series Capacitance R6*4: Within 7.5% Change *4 GNM0M2R60G105: Within +15/-7.5% High-Q GJM Series 5.0 a b Array GNM Series 40 #GNMpp2 40 #GNMpp4 Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 242 hours at room temperature, then measure. 4 Step 1 2 3 Temp. (C) Min. Operating Room Min. Operating Room Temp. Temp. Temp. Temp. Time (min.) 303 303 2 to 3 2 to 3 * Initial measurement Perform a heat treatment at 150 +0/-10 C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. Apply the rated voltage at 402C and 90 to 95% humidity for 50012 hours. The charge/discharge current is less than 50mA. * Initial measurement Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. * Measurement after test Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Apply 150% (GNM1M2R61A225/1C105: 125% of the rated voltage) of the rated voltage for 100012 hours at the maximum operating temperature 3C. Let sit for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. * Initial measurement Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. * Measurement after test Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. 75 Monolithic Microchip GMA Series Item For Bonding GMD Series No. Product Information Continued from the preceding page. For General GRM Series GNM Series Specifications and Test Methods (2) GNM Series Specifications and Test Methods (2) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Low ESL LLL/LLR/LLA/LLM Series Reversed Geometry Low ESL Type Features 1. Low ESL, good for noise reduction for high frequency 2. Small, high cap Part Number Applications Low ESL LLp Series W T Array GNM Series L Decoupling solution for "chip sets", such as Mobile/FPD TV Controlled ESR Low ESL Type LLL153 LLL185 LLL215 LLL216 LLL219 LLL315 LLL317 LLL31M LLR185 L 0.5 0.05 0.8 0.1 Dimensions (mm) W 1.0 0.05 1.6 0.1 1.25 0.1 2.0 0.1 1.6 0.15 3.2 0.15 0.8 0.15 1.6 0.15 T 0.3 0.05 0.6 max. 0.5 +0/-0.15 0.6 0.1 0.85 0.1 0.5 +0/-0.15 0.7 0.1 1.15 0.1 0.5 +0.05/-0.1 High-Q GJM Series Features 1. Good solution for anti resonance reduction with Controlled ESR. 2. Suitable for high speed IC decoupling due to low inductance type. 3. 4 types of ESR are available. 1. All kind of IC package (network processor, media processor, etc) 2. Circuit that has anti-resonance q 1. Low ESL (100pH), suitable to decoupling capacitor for 1GHz clock speed IC. 2. Small, high cap High speed IC package (FPGA, network processor, etc) e Equivalent Circuit r q e t u w r y i P i Part Number Applications w LLA185 LLA215 LLA219 LLA315 LLA319 LLA31M L 1.6 0.1 2.0 0.1 2.0 0.1 3.2 0.15 3.2 0.15 3.2 0.15 u y t Dimensions (mm) W T 0.8 0.1 0.5 +0.05/-0.1 1.25 0.1 0.5 +0.05/-0.1 1.25 0.1 0.85 0.1 1.6 0.15 0.5 +0.05/-0.1 1.6 0.15 0.85 0.1 1.6 0.15 1.15 0.1 Ten Terminals Low ESL Type P 0.4 0.1 0.5 0.05 0.5 0.05 0.8 0.1 0.8 0.1 0.8 0.1 W L T For Bonding GMD Series Monolithic Microchip GMA Series Features Product Information W L Eight Terminals Low ESL Type T High Frequency GQM Series Applications Features 1. Low ESL (45pH), suitable to decoupling capacitor for 2GHz clock speed IC. 2. Small, high cap q Equivalent Circuit r P !0 Applications 76 e q e t u o o High speed IC package (FPGA, network processor, etc) w Part Number i u t y w r y i !0 Dimensions (mm) L W T P LLM215 2.0 0.1 1.25 0.1 0.5 +0.05/-0.1 0.5 0.05 LLM315 3.2 0.15 1.6 0.15 0.5 +0.05/-0.1 0.8 0.1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Reversed Geometry Low ESL Type X7R(R7)/X7S(C7)/X6S(C8)/X5R(R6) Characteristics 5 ex.5: T Dimension [mm] Rated Voltage 6.3 [Vdc] (0J) Capacitance 0.8x1.6 (18) <0306> 4 (0G) 50 (1H) 2200pF(222) 5 4700pF(472) 5 25 (1E) 16 (1C) 1.25x2.0 (21) <0508> 10 (1A) 4 (0G) 50 (1H) 10000pF(103) 5 6 22000pF(223) 5 6 47000pF(473) 5 0.10F(104) 3 5 0.22F(224) 3 5 0.47F(474) 25 (1E) 16 (1C) 1.6x3.2 (31) <0612> 10 (1A) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 6.3 (0J) 7 7 6 7 6 M 9 7 6 M M 5 9 1.0F(105) 5 9 2.2F(225) 5 3 4 (0G) Array GNM Series 0.5x1.0 (15) <0204> 7 7 M 7 M 9 7 4.7F(475) M 10F(106) M The part number code is shown in ( ) and Unit is shown in [ ]. Low ESL LLp Series LxW [mm] < >: EIA [inch] Code 5 High-Q GJM Series Reversed Geometry Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile ex.5: T Dimension [mm] 0.8x1.6 (18) <0306> Rated Voltage 25 [Vdc] (1E) Capacitance 10 (1A) 4 (0G) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 1.6x3.2 (31) <0612> 6.3 (0J) 4 (0G) 5 47000pF(473) 5 5 5 5 10 (1A) 5 5 0.22F(224) 16 (1C) 5 5 0.10F(104) 25 (1E) 5 5 5 22000pF(223) 50 (1H) 5 5 5 0.47F(474) 5 5 1.0F(105) 5 The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Monolithic Microchip GMA Series 10000pF(103) 16 (1C) 1.25x2.0 (21) <0508> High Frequency GQM Series LxW [mm] Controlled ESR Low ESL Type X7S(C7) Characteristics 5 ex.5: T Dimension [mm] 0.8x1.6 (18) <0306> LxW [mm] 4 (0G) Rated Voltage [Vdc] 1.0F(105) 5 5 5 For Bonding GMD Series ESR 100 220 470 1000 [m] (E01) (E03) (E05) (E07) 5 The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Product Information Capacitance 77 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Eight Terminals Low ESL Type X7S(C7)/X7R(R7) Characteristics 5 ex.5: T Dimension [mm] LxW 1.6x0.8 (18) [mm] <0603> Rated Voltage 4 [Vdc] (0G) Low ESL LLp Series Array GNM Series Capacitance 2.0x1.25 (21) <0805> 25 (1E) 10000pF(103) 9 22000pF(223) 9 47000pF(473) 16 (1C) 10 (1A) 3.2x1.6 (31) <1206> 6.3 (0J) 4 (0G) 16 (1C) 10 (1A) 4 (0G) 9 0.10F(104) 5 9 0.22F(224) 5 9 0.47F(474) 5 1.0F(105) 5 2.2F(225) 5 9 9 9 9 M 9 M 9 4.7F(475) 9 9 9 The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile 5 ex.5: T Dimension [mm] 2.0x1.25 (21) <0805> Rated Voltage 25 [Vdc] (1E) Capacitance 10000pF(103) 5 22000pF(223) 5 16 (1C) 47000pF(473) 5 0.10F(104) 5 0.22F(224) High Frequency GQM Series High-Q GJM Series LxW [mm] 10 (1A) 3.2x1.6 (31) <1206> 6.3 (0J) 4 (0G) 6.3 (0J) 5 5 1.0F(105) 5 5 2.2F(225) 5 5 4.7F(475) 5 The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Ten Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile 5 ex.5: T Dimension [mm] 2.0x1.25 (21) <0805> LxW [mm] Rated Voltage 25 [Vdc] (1E) Capacitance For Bonding GMD Series Monolithic Microchip GMA Series 10 (1A) 5 5 0.47F(474) 16 (1C) 10000pF(103) 5 22000pF(223) 5 16 (1C) 47000pF(473) 5 0.10F(104) 5 6.3 (0J) 3.2x1.6 (31) <1206> 4 (0G) 16 (1C) Product Information 6.3 (0J) 5 0.22F(224) 5 0.47F(474) 5 5 5 1.0F(105) 5 2.2F(225) 5 The part number code is shown in ( ) and Unit is shown in [ ]. 78 10 (1A) 5 < >: EIA [inch] Code PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Reversed Geometry Low ESL Type X7R(R7)/X7S(C7)/X6S(C8) Characteristics 0.5x1.0(15)<0204> LxW [mm] 6.3(0J) Rated Volt. [Vdc] Tolerance 4(0G) Part Number 0.10F(104) 20%(M) LLL153C80J104ME01E* 0.22F(224) 20%(M) LLL153C80J224ME14E* 0.47F(474) 20%(M) Array GNM Series LLL153C70G474ME17E* LLL153 Series 4V/0.47F(L: 0.5+0.07/-0.03mm) 0.8x1.6(18)<0306> LxW [mm] 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) 10(1A) Part Number 2200pF(222) 20%(M) LLL185R71H222MA01L 4700pF(472) 20%(M) LLL185R71H472MA01L 10000pF(103) 20%(M) LLL185R71E103MA01L 22000pF(223) 20%(M) LLL185R71E223MA01L 47000pF(473) 20%(M) 0.10F(104) 20%(M) LLL185R71A104MA01L 0.22F(224) 20%(M) LLL185R71A224MA01L LLL185R71C473MA01L Low ESL LLp Series Capacitance 0.8x1.6(18)<0306> LxW [mm] Capacitance Tolerance High-Q GJM Series 4(0G) Rated Volt. [Vdc] Part Number 0.47F(474) 20%(M) LLL185C70G474MA01L 1.0F(105) 20%(M) LLL185C70G105ME02L* 2.2F(225) 20%(M) LLL185C70G225ME01L* 1.25x2.0(21)<0508> Capacitance 25(1E) Tolerance 16(1C) 10(1A) LLL219R71C224MA01L LLL216R71A224MA01L High Frequency GQM Series 50(1H) Rated Volt. [Vdc] Part Number 10000pF(103) 20%(M) LLL216R71H103MA01L 22000pF(223) 20%(M) LLL216R71H223MA01L 47000pF(473) 20%(M) LLL216R71E473MA01L 0.10F(104) 20%(M) LLL216R71E104MA01L 0.22F(224) 20%(M) 0.47F(474) 20%(M) LLL219R71A474MA01L 1.0F(105) 20%(M) LLL219R71A105MA01L 1.25x2.0(21)<0508> LxW [mm] 4(0G) Rated Volt. [Vdc] Capacitance Tolerance 2.2F(225) Part Number 20%(M) Monolithic Microchip GMA Series LxW [mm] LLL219C70G225MA01L (Part Number) LL L 15 3 C8 0J 104 M q w e r t y u i E01 E o !0 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging Packaging Code in Part Number shows STD 180mm Reel Taping. 79 Product Information For Bonding GMD Series The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to LLL/LLR/LLA/LLM Series Specifications and Test Method (2). PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Reversed Geometry Low ESL Type X7R(R7)/X5R(R6) Characteristics 1.6x3.2(31)<0612> LxW [mm] 50(1H) Rated Volt. [Vdc] Array GNM Series Capacitance Tolerance 16(1C) 10(1A) Part Number 10000pF(103) 20%(M) LLL317R71H103MA01L 22000pF(223) 20%(M) LLL317R71H223MA01L 47000pF(473) 20%(M) LLL317R71H473MA01L 0.10F(104) 20%(M) LLL31MR71H104MA01L 0.22F(224) 20%(M) LLL31MR71E224MA01L 0.47F(474) 20%(M) LLL31MR71E474MA01L 1.0F(105) 20%(M) 2.2F(225) 20%(M) LLL317R71E104MA01L LLL317R71C224MA01L LLL317R71C474MA01L LLL31MR71C105MA01L LLL317R71A105MA01L LLL31MR71A225MA01L 1.6x3.2(31)<0612> LxW [mm] Low ESL LLp Series 25(1E) 6.3(0J) Rated Volt. [Vdc] Capacitance Tolerance Part Number 2.2F(225) 20%(M) LLL317R70J225MA01L 4.7F(475) 20%(M) LLL31MR70J475MA01L 10F(106) 20%(M) LLL31MR60J106ME01L* High-Q GJM Series The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to LLL/LLR/LLA/LLM Series Specifications and Test Method (2). Reversed Geometry Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile 0.8x1.6(18)<0306> LxW [mm] 25(1E) Rated Volt. [Vdc] High Frequency GQM Series Capacitance 16(1C) Tolerance 10000pF(103) 20%(M) 22000pF(223) 20%(M) LLL185R71C223MA11L 47000pF(473) 20%(M) LLL185R71C473MA11L 0.10F(104) 20%(M) 0.22F(224) 20%(M) LLL185R71A104MA11L LLL185C70G224MA11L 1.25x2.0(21)<0508> Monolithic Microchip GMA Series For Bonding GMD Series 50(1H) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 16(1C) 10(1A) Part Number 10000pF(103) 20%(M) 22000pF(223) 20%(M) 47000pF(473) 20%(M) LLL215R71C473MA11L 0.10F(104) 20%(M) LLL215R71C104MA11L 0.22F(224) 20%(M) LLL215R71H103MA11L LLL215R71E223MA11L LLL215R71A224MA11L 1.25x2.0(21)<0508> LxW [mm] 6.3(0J) Rated Volt. [Vdc] Capacitance Tolerance 0.47F(474) 20%(M) 1.0F(105) 20%(M) 4(0G) Part Number LLL215R70J474MA11L LLL215C70G105MA11L The part number code is shown in ( ) and Unit is shown in [ ]. Product Information 4(0G) LLL185R71E103MA11L LxW [mm] (Part Number) LL L 31 7 R7 1H q w e r t y 103 M u i < >: EIA [inch] Code A01 L o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 80 10(1A) Part Number qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1.6x3.2(31)<0612> LxW [mm] 50(1H) 25(1E) 16(1C) Tolerance 10(1A) Part Number 10000pF(103) 20%(M) LLL315R71H103MA11L 22000pF(223) 20%(M) LLL315R71H223MA11L 47000pF(473) 20%(M) LLL315R71E473MA11L 0.10F(104) 20%(M) LLL315R71E104MA11L 0.22F(224) 20%(M) 0.47F(474) 20%(M) LLL315R71C224MA11L LLL315R71A474MA11L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Array GNM Series Rated Volt. [Vdc] Capacitance For General GRM Series Reversed Geometry Low ESL Type X7R(R7) Characteristics-Low Profile 0.8x1.6(18)<0306> LxW [mm] 4(0G) Rated Volt. [Vdc] 100(E01) ESR [m] Capacitance 1.0F(105) Low ESL LLp Series Controlled ESR Low ESL Type X7S(C7) Characteristics 220(E03) Tolerance 20%(M) 470(E05) 1000(E07) LLR185C70G105ME05L* LLR185C70G105ME07L* Part Number LLR185C70G105ME01L* LLR185C70G105ME03L* High-Q GJM Series The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to LLL/LLR/LLA/LLM Series Specifications and Test Method (2). Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics 1.6x0.8(18)<0603> LxW [mm] 4(0G) 0.10F(104) 20%(M) LLA185C70G104MA01L 0.22F(224) 20%(M) LLA185C70G224MA01L 0.47F(474) 20%(M) LLA185C70G474MA01L 1.0F(105) 20%(M) LLA185C70G105ME01L* 2.2F(225) 20%(M) LLA185C70G225ME16L* High Frequency GQM Series Part Number 2.0x1.25(21)<0805> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 16(1C) Tolerance 10(1A) 6.3(0J) Part Number 10000pF(103) 20%(M) LLA219R71E103MA01L 22000pF(223) 20%(M) LLA219R71E223MA01L 47000pF(473) 20%(M) LLA219R71E473MA01L 0.10F(104) 20%(M) LLA219R71C104MA01L 0.22F(224) 20%(M) LLA219R71C224MA01L 0.47F(474) 20%(M) 1.0F(105) 20%(M) LLA219R71A474MA01L LLA219R70J105MA01L 2.0x1.25(21)<0805> LxW [mm] 4(0G) Rated Volt. [Vdc] Capacitance Monolithic Microchip GMA Series Tolerance Tolerance Part Number 2.2F(225) 20%(M) LLA219C70G225MA01L 4.7F(475) 20%(M) LLA219C70G475ME01L* Product Information Capacitance For Bonding GMD Series Rated Volt. [Vdc] The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to LLL/LLR/LLA/LLM Series Specifications and Test Method (2). 81 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Eight Terminals Low ESL Type X7R(R7) Characteristics 3.2x1.6(31)<1206> LxW [mm] Capacitance Array GNM Series 16(1C) Rated Volt. [Vdc] 10(1A) Tolerance 4(0G) Part Number 0.10F(104) 20%(M) LLA319R71C104MA01L 0.22F(224) 20%(M) LLA319R71C224MA01L 0.47F(474) 20%(M) LLA319R71C474MA01L 1.0F(105) 20%(M) LLA31MR71C105MA01L 2.2F(225) 20%(M) LLA319R71A105MA01L LLA31MR71A225MA01L The part number code is shown in ( ) and Unit is shown in [ ]. LLA319R70G225MA01L < >: EIA [inch] Code Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile 2.0x1.25(21)<0805> High Frequency GQM Series High-Q GJM Series Low ESL LLp Series LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance 16(1C) 10000pF(103) 20%(M) LLA215R71E103MA14L 22000pF(223) 20%(M) LLA215R71E223MA14L 47000pF(473) 20%(M) LLA215R71C473MA14L 0.10F(104) 20%(M) LLA215R71C104MA14L 0.22F(224) 20%(M) 0.47F(474) 20%(M) LLA215R71A224MA14L LLA215R70J474MA14L 2.0x1.25(21)<0805> LxW [mm] 3.2x1.6(31)<1206> 4(0G) Rated Volt. [Vdc] Capacitance Monolithic Microchip GMA Series For Bonding GMD Series 6.3(0J) Part Number 16(1C) 10(1A) Tolerance 6.3(0J) Part Number 0.22F(224) 20%(M) 0.47F(474) 20%(M) 1.0F(105) 20%(M) LLA215C70G105MA14L LLA315R70J105MA14L 2.2F(225) 20%(M) LLA215C70G225ME11L* LLA315R70J225MA14L 4.7F(475) 20%(M) LLA215C70G475ME19L* LLA315R71C224MA14L LLA315R71A474MA14L Ten Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics-Low Profile 2.0x1.25(21)<0805> LxW [mm] Product Information 10(1A) Tolerance 25(1E) Rated Volt. [Vdc] Capacitance 16(1C) Tolerance 6.3(0J) 4(0G) Part Number 10000pF(103) 20%(M) LLM215R71E103MA11L 22000pF(223) 20%(M) LLM215R71E223MA11L 47000pF(473) 20%(M) LLM215R71C473MA11L 0.10F(104) 20%(M) LLM215R71C104MA11L 0.22F(224) 20%(M) LLM215R70J224MA11L 0.47F(474) 20%(M) LLM215R70J474MA11L 1.0F(105) 20%(M) LLM215C70G105MA11L 2.2F(225) 20%(M) LLM215C70G225ME11L* 3.2x1.6(31)<1206> LxW [mm] 16(1C) Rated Volt. [Vdc] Capacitance 10(1A) Tolerance 6.3(0J) Part Number 0.10F(104) 20%(M) LLM315R71C104MA11L 0.22F(224) 20%(M) LLM315R71C224MA11L 0.47F(474) 20%(M) 2.2F(225) 20%(M) LLM315R71A474MA11L LLM315R70J225MA11L The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to LLL/LLR/LLA/LLM Series Specifications and Test Method (2). (Part Number) LL A 31 9 R7 1C q w e r t y 104 M u i A01 L o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 82 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance notice. Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 When no "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (2). Test Method Rated Voltage See the previous pages. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimension Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance CV0.047F: More than 10,000M CG0.047F: More than 500 * F C: Normal Capacitance The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25C and 75%RH max. and within 2 minutes of charging. 7 Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) W.V.: 25V min.; 0.025 max. W.V.: 16V/10V max.; 0.035 max. W.V.: 6.3V max.; 0.05 max. The capacitance/D.F. should be measured at 25C at the frequency and voltage shown in the table. Frequency: 10.1kHz Voltage: 10.2Vrms *For LLA185C70G474, the capacitance should be measured unsing a voltage of 0.50.1Vrms. 9 10 Capacitance Temperature Characteristics Adhesive Strength of Termination Char. R7 C7 Temp. Range (C) -55 to +125 -55 to +125 Reference Temp. 25C 25C Cap.Change Within 15% Within 22% No removal of the terminations or other defect should occur. Appearance No defects or abnormalities Capacitance Within the specified tolerance 11 Vibration Resistance D.F. Solderability of 12 Termination W.V.: 25V min.; 0.025 max. W.V.: 16V/10V max.; 0.035 max. W.V.: 6.3V max.; 0.05 max. 75% of the terminations are to be soldered evenly and continuously. Step 1 2 3 4 5 High-Q GJM Series The capacitance change should be measured after 5 min. at each specified temperature stage. Low ESL LLp Series 2 The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. Array GNM Series R7, C7: -55 to +125C Temperature (C) 252 -553 252 1253 252 The ranges of capacitance change compared with the 25C value over the temperature ranges shown in the table should be within the specified ranges. * Initial measurement. Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. Solder the capacitor to the test jig (glass epoxy board) using a eutectic solder. Then apply 10N* force in parallel with the test jig for 101 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *5N (LLL18 and LLA/LLM Series) Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 20.5 seconds at 2305C, or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. High Frequency GQM Series Operating Temperature Range Specifications Monolithic Microchip GMA Series 1 Item For Bonding GMD Series No. For General GRM Series LLL/LLA/LLM SeriesLLL/LLR/LLA/LLM Specifications and Test Methods (1) and Test Methods (1) Series Specifications Appearance No marking defects Resistance 13 to Soldering D.F. Heat W.V.: 25V min.; 0.025 max. W.V.: 16V/10V max.; 0.035 max. W.V.: 6.3V max.; 0.05 max. I.R. More than 10,000M or 500 * F (whichever is smaller) Dielectric Strength No failure Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 2705C for 100.5 seconds. Let sit at room temperature for 242 hours, then measure. Product Information Capacitance Within 7.5% Change * Initial measurement. Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. Continued on the following page. 83 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 For General GRM Series LLL/LLA/LLM Series Specifications and Test Methods (1) (1) LLL/LLR/LLA/LLM Series Specifications and Test Methods Continued from the preceding page. No. When no "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (2). Item Specifications Appearance No marking defects Capacitance Within 7.5% Change Array GNM Series D.F. 14 Temperature Cycle W.V.: 25V min.; 0.025 max. W.V.: 16V/10V max.; 0.035 max. W.V.: 6.3V max.; 0.05 max. Test Method Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 242 hours at room temperature, then measure. 4 1 2 3 Min. Operating Room Max. Operating Room Temp. +0/-3 Temp. Temp. +3/-0 Temp. Time (min.) 303 2 to 3 303 2 to 3 Step Temp. (C) I.R. More than 10,000M or 500 * F (whichever is smaller) Dielectric Strength No failure * Initial measurement. Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. Low ESL LLp Series Appearance No marking defects Humidity 15 (Steady State) Capacitance Within 12.5% Change D.F. W.V.: 10V min.; 0.05 max. W.V.: 6.3V max.; 0.075 max. I.R. More than 1,000M or 50 * F (whichever is smaller) Set the capacitor at 402C and 90 to 95% humidity for 50012 hours. Remove and let sit for 242 hours at room temperature, then measure. Appearance No marking defects High-Q GJM Series Capacitance Within 12.5% Change Humidity 16 Load D.F. W.V.: 10V min.; 0.05 max. W.V.: 6.3V max.; 0.075 max. I.R. More than 500M or 25 * F (whichever is smaller) Appearance No marking defects High 17 Temperature Load Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series Capacitance Within 12.5% Change 84 D.F. W.V.: 10V min.; 0.05 max. W.V.: 6.3V max.; 0.075 max. I.R. More than 1,000M or 50 * F (whichever is smaller) Apply the rated voltage at 402C and 90 to 95% humidity for 50012 hours. Remove and let sit for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. Apply 200% of the rated voltage for 100012 hours at the maximum operating temperature 3C. Let sit for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. *Initial measurement. Apply 200% of the rated DC voltage for one hour at the maximum operating temperature 3C. Remove and let sit for 242 hours at room temperature. Perform initial measurement. PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 R6: -55 to +85C R7, C7: -55 to +125C C8: -55 to +105C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimension Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance 50 * F min. The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25C and 75%RH max. and within 1 minute of charging. 7 Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) R6, R7, C7, C8: 0.120 max. 10 Adhesive Strength of Termination R6 R7 C7 C8 Reference Temp. Cap. Change 25C Within 15% Within 15% Within 22% Within 22% No removal of the terminations or other defect should occur. Appearance No defects or abnormalities Capacitance Within the specified tolerance 11 Vibration D.F. 12 Solderability of Termination R6, R7, C7, C8: 0.120 max. 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance R6, R7, C7, C8: Within 7.5% Change Resistance R6, R7, C7, C8: 0.120 max. 13 to Soldering D.F. Heat I.R. 50 * F min. Dielectric No failure Strength Frequency 10.1kHz 10.1kHz 12024Hz Voltage 1.00.2Vrms 0.50.1Vrms 0.50.1Vrms The capacitance change should be measured after 5 min. at each specified temperature stage. The ranges of capacitance change compared with the 25C value over the temperature ranges shown in the table should be within the specified ranges. High-Q GJM Series 9 Capacitance Temperature Characteristics Temp. Range (C) -55 to +85 -55 to +125 -55 to +125 -55 to +105 Capacitance CV10F (10V min.) CV10F (6.3V max.) C>10F * Initial measurement. Perform a heat treatment at 150+0/-10C for one hour and then set for 242 hours at room temperature. Perform the initial measurement. Solder the capacitor to the test jig (glass epoxy board) using a eutectic solder. Then apply 10N* force in parallel with the test jig for 101 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *5N (LLL15, LLL18, LLR18, LLA, LLM Series) Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120C for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 20.5 seconds at 2305C, or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. Preheat the capacitor at 120 to 150C for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 2705C for 100.5 seconds. Let sit at room temperature for 242 hours, then measure. * Initial measurement. Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. Product Information Char. The capacitance/D.F. should be measured at 25C at the frequency and voltage shown in the table. Array GNM Series Test Method High Frequency GQM Series Operating Temperature Range Specifications Monolithic Microchip GMA Series 1 Item For Bonding GMD Series No. Low ESL LLp Series When no "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (2). For General GRM Series LLL/LLR/LLA/LLM Series Specifications and Test Methods (2) LLL/LLR/LLA/LLM Series Specifications and Test Methods (2) Continued on the following page. 85 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 For General GRM Series LLL/LLR/LLA/LLM Series Specifications and Test Methods (2) Continued from the preceding page. No. When no "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to LLL/LLR/LLA/LLM Series Specifications and Test Methods (2). Item Specifications Appearance No marking defects Temperature 14 Sudden Change High Temperature High 15 Humidity (Steady State) R6, R7, C7, C8: 0.120 max. I.R. 50 * F min. Dielectric Strength No failure * Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. Appearance No marking defects Apply the rated voltage at 402C and 90 to 95% humidity for 50012 hours. The charge/discharge current is less than 50mA. Apply the rated DC voltage. D.F. High Frequency GQM Series 2 4 1 3 Min. Operating Room Min. Operating Room Temp. (C) Temp. +0/-3 Temp. Temp. +0/-3 Temp. Time (min.) 303 2 to 3 303 2 to 3 Step R6, R7, C7, C8: 0.2 max. *Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. I.R. 12.5 * F min. *Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Appearance No marking defects Capacitance R6, R7, C7, C8: Within 12.5% Change * LLL153C70G474: Within 20% D.F. R6, R7, C7, C8: 0.2 max. I.R. 25 * F min. 16 Durability Apply 150% of the rated voltage for 100012 hours at the maximum operating temperature 3C. The charge/discharge current is less than 50mA. *Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. *Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. * 17 ESR Within below ESR value at Frequency: 100.1MHz 100m: Within 70 to 130m 220m: Within 154 to 286m 470m: Within 329 to 611m 1000m: Within 700 to 1300m * LLR: This specification is only for LLR Type Product Information For Bonding GMD Series Monolithic Microchip GMA Series Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10).Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 242 hours at room temperature, then measure. D.F. Capacitance R6, R7, C7, C8: Within 12.5% Change High-Q GJM Series Low ESL LLp Series Array GNM Series Capacitance R6, R7, C7, C8: Within 12.5% Change Test Method 86 The ESR should be measured at room temperature with the Equivalent of HP4294A. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Chip Monolithic Ceramic Capacitors High-Q Type GJM Series e Features g e T Array GNM Series 1. Mobile Telecommunication and RF module, mainly 2. Improvement of telephone call quality, Low power Consumption, yield ratio improvement. Applications L W VCO, PA, Mobile Telecommunication Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series g min. 0.2 0.3 For Bonding GMD Series GJM03 GJM15 Dimensions (mm) L W T e 0.6 0.03 0.3 0.03 0.3 0.03 0.1 to 0.2 1.0 0.05 0.5 0.05 0.5 0.05 0.15 to 0.35 Product Information Part Number 87 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics 3 ex.3: T Dimension [mm] LxW [mm] 0.6x0.3 (03) <0201> Rated Voltage 25 [Vdc] (1E) Array GNM Series Capacitance Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series 0.1pF(R10) 6.3 (0J) 1.0x0.5 (15) <0402> 50 (1H) LxW [mm] Rated Voltage 25 [Vdc] (1E) Capacitance 6.3 (0J) 1.0x0.5 (15) <0402> 50 (1H) LxW [mm] 0.6x0.3 (03) <0201> Rated Voltage 25 [Vdc] (1E) Capacitance 6.3 (0J) 1.0x0.5 (15) <0402> 50 (1H) 5 5.0pF(5R0) 3 5 9.9pF(9R9) 3 5 0.2pF(R20) 3 5 5.1pF(5R1) 3 5 10pF(100) 3 5 0.3pF(R30) 3 5 5.2pF(5R2) 3 5 11pF(110) 3 5 0.4pF(R40) 3 5 5.3pF(5R3) 3 5 12pF(120) 3 5 0.5pF(R50) 3 5 5.4pF(5R4) 3 5 13pF(130) 3 5 0.6pF(R60) 3 5 5.5pF(5R5) 3 5 15pF(150) 3 5 0.7pF(R70) 3 5 5.6pF(5R6) 3 5 16pF(160) 3 5 0.8pF(R80) 3 5 5.7pF(5R7) 3 5 18pF(180) 3 5 0.9pF(R90) 3 5 5.8pF(5R8) 3 5 20pF(200) 3 1.0pF(1R0) 3 5 5.9pF(5R9) 3 5 22pF(220) 3 1.1pF(1R1) 3 5 6.0pF(6R0) 3 5 24pF(240) 3 1.2pF(1R2) 3 5 6.1pF(6R1) 3 5 27pF(270) 3 1.3pF(1R3) 3 5 6.2pF(6R2) 3 5 30pF(300) 3 1.4pF(1R4) 3 5 6.3pF(6R3) 3 5 33pF(330) 3 1.5pF(1R5) 3 5 6.4pF(6R4) 3 5 1.6pF(1R6) 3 5 6.5pF(6R5) 3 5 1.7pF(1R7) 3 5 6.6pF(6R6) 3 5 1.8pF(1R8) 3 5 6.7pF(6R7) 3 5 1.9pF(1R9) 3 5 6.8pF(6R8) 3 5 2.0pF(2R0) 3 5 6.9pF(6R9) 3 5 2.1pF(2R1) 3 5 7.0pF(7R0) 3 5 2.2pF(2R2) 3 5 7.1pF(7R1) 3 5 2.3pF(2R3) 3 5 7.2pF(7R2) 3 5 2.4pF(2R4) 3 5 7.3pF(7R3) 3 5 2.5pF(2R5) 3 5 7.4pF(7R4) 3 5 2.6pF(2R6) 3 5 7.5pF(7R5) 3 5 2.7pF(2R7) 3 5 7.6pF(7R6) 3 5 2.8pF(2R8) 3 5 7.7pF(7R7) 3 5 2.9pF(2R9) 3 5 7.8pF(7R8) 3 5 3.0pF(3R0) 3 5 7.9pF(7R9) 3 5 3.1pF(3R1) 3 5 8.0pF(8R0) 3 5 3.2pF(3R2) 3 5 8.1pF(8R1) 3 5 3.3pF(3R3) 3 5 8.2pF(8R2) 3 5 3.4pF(3R4) 3 5 8.3pF(8R3) 3 5 3.5pF(3R5) 3 5 8.4pF(8R4) 3 5 3.6pF(3R6) 3 5 8.5pF(8R5) 3 5 3.7pF(3R7) 3 5 8.6pF(8R6) 3 5 3.8pF(3R8) 3 5 8.7pF(8R7) 3 5 3.9pF(3R9) 3 5 8.8pF(8R8) 3 5 4.0pF(4R0) 3 5 8.9pF(8R9) 3 5 4.1pF(4R1) 3 5 9.0pF(9R0) 3 5 4.2pF(4R2) 3 5 9.1pF(9R1) 3 5 4.3pF(4R3) 3 5 9.2pF(9R2) 3 5 4.4pF(4R4) 3 5 9.3pF(9R3) 3 5 4.5pF(4R5) 3 5 9.4pF(9R4) 3 5 4.6pF(4R6) 3 5 9.5pF(9R5) 3 5 4.7pF(4R7) 3 5 9.6pF(9R6) 3 5 4.8pF(4R8) 3 5 9.7pF(9R7) 3 5 4.9pF(4R9) 3 5 9.8pF(9R8) 3 5 The part number code is shown in ( ) and Unit is shown in [ ]. 88 0.6x0.3 (03) <0201> < >: EIA [inch] Code 5 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. LxW [mm] 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 25(1E) 50(1H) Rated Volt. [Vdc] Tolerance 0.05pF(W) GJM1555C1HR10WB01D 0.1pF(B) GJM1555C1HR10BB01D 0.2pF(R20) 0.05pF(W) 0.1pF(B) GJM0335C1ER20BB01D GJM1555C1HR20BB01D 0.3pF(R30) 0.05pF(W) GJM0335C1ER30WB01D GJM1555C1HR30WB01D 0.1pF(B) GJM0335C1ER30BB01D GJM1555C1HR30BB01D 0.4pF(R40) 0.05pF(W) GJM0335C1ER40WB01D GJM1555C1HR40WB01D 0.1pF(B) GJM0335C1ER40BB01D GJM1555C1HR40BB01D 0.5pF(R50) 0.05pF(W) GJM0335C1ER50WB01D GJM1555C1HR50WB01D 0.1pF(B) GJM0335C1ER50BB01D GJM1555C1HR50BB01D 0.6pF(R60) 0.05pF(W) GJM0335C1ER60WB01D GJM1555C1HR60WB01D 0.1pF(B) GJM0335C1ER60BB01D GJM1555C1HR60BB01D 0.7pF(R70) 0.05pF(W) GJM0335C1ER70WB01D GJM1555C1HR70WB01D 0.1pF(B) GJM0335C1ER70BB01D GJM1555C1HR70BB01D 0.8pF(R80) 0.05pF(W) GJM0335C1ER80WB01D GJM1555C1HR80WB01D 0.1pF(B) GJM0335C1ER80BB01D GJM1555C1HR80BB01D 0.05pF(W) GJM0335C1ER90WB01D GJM1555C1HR90WB01D 0.1pF(B) GJM0335C1ER90BB01D GJM1555C1HR90BB01D 0.05pF(W) GJM0335C1E1R0WB01D GJM1555C1H1R0WB01D 1.1pF(1R1) 1.2pF(1R2) 1.3pF(1R3) 1.4pF(1R4) 1.5pF(1R5) 1.6pF(1R6) 1.7pF(1R7) 1.8pF(1R8) 1.9pF(1R9) GJM0335C1E1R0BB01D GJM1555C1H1R0BB01D GJM0335C1E1R0CB01D GJM1555C1H1R0CB01D 0.05pF(W) GJM0335C1E1R1WB01D GJM1555C1H1R1WB01D 0.1pF(B) GJM0335C1E1R1BB01D GJM1555C1H1R1BB01D 0.25pF(C) GJM0335C1E1R1CB01D GJM1555C1H1R1CB01D 0.05pF(W) GJM0335C1E1R2WB01D GJM1555C1H1R2WB01D 0.1pF(B) GJM0335C1E1R2BB01D GJM1555C1H1R2BB01D 0.25pF(C) GJM0335C1E1R2CB01D GJM1555C1H1R2CB01D 0.05pF(W) GJM0335C1E1R3WB01D GJM1555C1H1R3WB01D 0.1pF(B) GJM0335C1E1R3BB01D GJM1555C1H1R3BB01D 0.25pF(C) GJM0335C1E1R3CB01D GJM1555C1H1R3CB01D 0.05pF(W) GJM0335C1E1R4WB01D GJM1555C1H1R4WB01D 0.1pF(B) GJM0335C1E1R4BB01D GJM1555C1H1R4BB01D 0.25pF(C) GJM0335C1E1R4CB01D GJM1555C1H1R4CB01D 0.05pF(W) GJM0335C1E1R5WB01D GJM1555C1H1R5WB01D GJM1555C1H1R5BB01D 0.1pF(B) GJM0335C1E1R5BB01D 0.25pF(C) GJM0335C1E1R5CB01D GJM1555C1H1R5CB01D 0.05pF(W) GJM0335C1E1R6WB01D GJM1555C1H1R6WB01D GJM1555C1H1R6BB01D 0.1pF(B) GJM0335C1E1R6BB01D 0.25pF(C) GJM0335C1E1R6CB01D GJM1555C1H1R6CB01D 0.05pF(W) GJM0335C1E1R7WB01D GJM1555C1H1R7WB01D 0.1pF(B) GJM0335C1E1R7BB01D GJM1555C1H1R7BB01D 0.25pF(C) GJM0335C1E1R7CB01D GJM1555C1H1R7CB01D 0.05pF(W) GJM0335C1E1R8WB01D GJM1555C1H1R8WB01D 0.1pF(B) GJM0335C1E1R8BB01D GJM1555C1H1R8BB01D 0.25pF(C) GJM0335C1E1R8CB01D GJM1555C1H1R8CB01D 0.05pF(W) GJM0335C1E1R9WB01D GJM1555C1H1R9WB01D 0.1pF(B) GJM0335C1E1R9BB01D GJM1555C1H1R9BB01D 0.25pF(C) GJM0335C1E1R9CB01D GJM1555C1H1R9CB01D The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GJ M 03 3 5C 1E q w e r t y R20 W u i Array GNM Series Low ESL LLp Series High-Q GJM Series 0.1pF(B) 0.25pF(C) High Frequency GQM Series 1.0pF(1R0) Monolithic Microchip GMA Series 0.9pF(R90) GJM1555C1HR20WB01D GJM0335C1ER20WB01D For Bonding GMD Series 0.1pF(R10) Part Number < >: EIA [inch] Code B01 D o !0 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging Packaging Code in Part Number shows STD 180mm Reel Taping. 89 Product Information Capacitance For General GRM Series Temperature Compensating Type C0G(5C) Characteristics PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] Capacitance 1.0x0.5(15)<0402> 25(1E) 50(1H) Tolerance Array GNM Series 2.0pF(2R0) 2.1pF(2R1) 2.2pF(2R2) Low ESL LLp Series 2.3pF(2R3) 2.4pF(2R4) High-Q GJM Series 2.5pF(2R5) 2.6pF(2R6) 2.7pF(2R7) High Frequency GQM Series 2.8pF(2R8) 2.9pF(2R9) Monolithic Microchip GMA Series 3.0pF(3R0) 3.1pF(3R1) 3.2pF(3R2) For Bonding GMD Series 3.3pF(3R3) 3.4pF(3R4) 3.5pF(3R5) Product Information 0.6x0.3(03)<0201> Rated Volt. [Vdc] Part Number 0.05pF(W) GJM0335C1E2R0WB01D GJM1555C1H2R0WB01D 0.1pF(B) GJM0335C1E2R0BB01D GJM1555C1H2R0BB01D 0.25pF(C) GJM0335C1E2R0CB01D GJM1555C1H2R0CB01D 0.05pF(W) GJM0335C1E2R1WB01D GJM1555C1H2R1WB01D 0.1pF(B) GJM0335C1E2R1BB01D GJM1555C1H2R1BB01D 0.25pF(C) GJM0335C1E2R1CB01D GJM1555C1H2R1CB01D 0.05pF(W) GJM0335C1E2R2WB01D GJM1555C1H2R2WB01D GJM1555C1H2R2BB01D 0.1pF(B) GJM0335C1E2R2BB01D 0.25pF(C) GJM0335C1E2R2CB01D GJM1555C1H2R2CB01D 0.05pF(W) GJM0335C1E2R3WB01D GJM1555C1H2R3WB01D GJM1555C1H2R3BB01D 0.1pF(B) GJM0335C1E2R3BB01D 0.25pF(C) GJM0335C1E2R3CB01D GJM1555C1H2R3CB01D 0.05pF(W) GJM0335C1E2R4WB01D GJM1555C1H2R4WB01D GJM1555C1H2R4BB01D 0.1pF(B) GJM0335C1E2R4BB01D 0.25pF(C) GJM0335C1E2R4CB01D GJM1555C1H2R4CB01D 0.05pF(W) GJM0335C1E2R5WB01D GJM1555C1H2R5WB01D GJM1555C1H2R5BB01D 0.1pF(B) GJM0335C1E2R5BB01D 0.25pF(C) GJM0335C1E2R5CB01D GJM1555C1H2R5CB01D 0.05pF(W) GJM0335C1E2R6WB01D GJM1555C1H2R6WB01D 0.1pF(B) GJM0335C1E2R6BB01D GJM1555C1H2R6BB01D 0.25pF(C) GJM0335C1E2R6CB01D GJM1555C1H2R6CB01D 0.05pF(W) GJM0335C1E2R7WB01D GJM1555C1H2R7WB01D 0.1pF(B) GJM0335C1E2R7BB01D GJM1555C1H2R7BB01D 0.25pF(C) GJM0335C1E2R7CB01D GJM1555C1H2R7CB01D 0.05pF(W) GJM0335C1E2R8WB01D GJM1555C1H2R8WB01D 0.1pF(B) GJM0335C1E2R8BB01D GJM1555C1H2R8BB01D 0.25pF(C) GJM0335C1E2R8CB01D GJM1555C1H2R8CB01D 0.05pF(W) GJM0335C1E2R9WB01D GJM1555C1H2R9WB01D GJM1555C1H2R9BB01D 0.1pF(B) GJM0335C1E2R9BB01D 0.25pF(C) GJM0335C1E2R9CB01D GJM1555C1H2R9CB01D 0.05pF(W) GJM0335C1E3R0WB01D GJM1555C1H3R0WB01D 0.1pF(B) GJM0335C1E3R0BB01D GJM1555C1H3R0BB01D 0.25pF(C) GJM0335C1E3R0CB01D GJM1555C1H3R0CB01D 0.05pF(W) GJM0335C1E3R1WB01D GJM1555C1H3R1WB01D GJM1555C1H3R1BB01D 0.1pF(B) GJM0335C1E3R1BB01D 0.25pF(C) GJM0335C1E3R1CB01D GJM1555C1H3R1CB01D 0.05pF(W) GJM0335C1E3R2WB01D GJM1555C1H3R2WB01D GJM1555C1H3R2BB01D 0.1pF(B) GJM0335C1E3R2BB01D 0.25pF(C) GJM0335C1E3R2CB01D GJM1555C1H3R2CB01D 0.05pF(W) GJM0335C1E3R3WB01D GJM1555C1H3R3WB01D 0.1pF(B) GJM0335C1E3R3BB01D GJM1555C1H3R3BB01D 0.25pF(C) GJM0335C1E3R3CB01D GJM1555C1H3R3CB01D 0.05pF(W) GJM0335C1E3R4WB01D GJM1555C1H3R4WB01D 0.1pF(B) GJM0335C1E3R4BB01D GJM1555C1H3R4BB01D 0.25pF(C) GJM0335C1E3R4CB01D GJM1555C1H3R4CB01D 0.05pF(W) GJM0335C1E3R5WB01D GJM1555C1H3R5WB01D 0.1pF(B) GJM0335C1E3R5BB01D GJM1555C1H3R5BB01D 0.25pF(C) GJM0335C1E3R5CB01D GJM1555C1H3R5CB01D The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GJ M 03 3 5C 1E q w e r t y 2R0 W u i < >: EIA [inch] Code B01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 90 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 3.9pF(3R9) 4.0pF(4R0) 4.1pF(4R1) 4.2pF(4R2) 4.3pF(4R3) 4.4pF(4R4) 4.5pF(4R5) 4.6pF(4R6) 4.7pF(4R7) 4.8pF(4R8) 4.9pF(4R9) 5.0pF(5R0) 5.1pF(5R1) GJM0335C1E3R6WB01D GJM1555C1H3R6WB01D 0.1pF(B) GJM0335C1E3R6BB01D GJM1555C1H3R6BB01D 0.25pF(C) GJM0335C1E3R6CB01D GJM1555C1H3R6CB01D 0.05pF(W) GJM0335C1E3R7WB01D GJM1555C1H3R7WB01D 0.1pF(B) GJM0335C1E3R7BB01D GJM1555C1H3R7BB01D 0.25pF(C) GJM0335C1E3R7CB01D GJM1555C1H3R7CB01D 0.05pF(W) GJM0335C1E3R8WB01D GJM1555C1H3R8WB01D GJM1555C1H3R8BB01D 0.1pF(B) GJM0335C1E3R8BB01D 0.25pF(C) GJM0335C1E3R8CB01D GJM1555C1H3R8CB01D 0.05pF(W) GJM0335C1E3R9WB01D GJM1555C1H3R9WB01D GJM1555C1H3R9BB01D 0.1pF(B) GJM0335C1E3R9BB01D 0.25pF(C) GJM0335C1E3R9CB01D GJM1555C1H3R9CB01D 0.05pF(W) GJM0335C1E4R0WB01D GJM1555C1H4R0WB01D GJM1555C1H4R0BB01D 0.1pF(B) GJM0335C1E4R0BB01D 0.25pF(C) GJM0335C1E4R0CB01D GJM1555C1H4R0CB01D 0.05pF(W) GJM0335C1E4R1WB01D GJM1555C1H4R1WB01D GJM1555C1H4R1BB01D 0.1pF(B) GJM0335C1E4R1BB01D 0.25pF(C) GJM0335C1E4R1CB01D GJM1555C1H4R1CB01D 0.05pF(W) GJM0335C1E4R2WB01D GJM1555C1H4R2WB01D 0.1pF(B) GJM0335C1E4R2BB01D GJM1555C1H4R2BB01D 0.25pF(C) GJM0335C1E4R2CB01D GJM1555C1H4R2CB01D 0.05pF(W) GJM0335C1E4R3WB01D GJM1555C1H4R3WB01D 0.1pF(B) GJM0335C1E4R3BB01D GJM1555C1H4R3BB01D 0.25pF(C) GJM0335C1E4R3CB01D GJM1555C1H4R3CB01D 0.05pF(W) GJM0335C1E4R4WB01D GJM1555C1H4R4WB01D 0.1pF(B) GJM0335C1E4R4BB01D GJM1555C1H4R4BB01D 0.25pF(C) GJM0335C1E4R4CB01D GJM1555C1H4R4CB01D 0.05pF(W) GJM0335C1E4R5WB01D GJM1555C1H4R5WB01D GJM1555C1H4R5BB01D 0.1pF(B) GJM0335C1E4R5BB01D 0.25pF(C) GJM0335C1E4R5CB01D GJM1555C1H4R5CB01D 0.05pF(W) GJM0335C1E4R6WB01D GJM1555C1H4R6WB01D 0.1pF(B) GJM0335C1E4R6BB01D GJM1555C1H4R6BB01D 0.25pF(C) GJM0335C1E4R6CB01D GJM1555C1H4R6CB01D 0.05pF(W) GJM0335C1E4R7WB01D GJM1555C1H4R7WB01D GJM1555C1H4R7BB01D 0.1pF(B) GJM0335C1E4R7BB01D 0.25pF(C) GJM0335C1E4R7CB01D GJM1555C1H4R7CB01D 0.05pF(W) GJM0335C1E4R8WB01D GJM1555C1H4R8WB01D GJM1555C1H4R8BB01D 0.1pF(B) GJM0335C1E4R8BB01D 0.25pF(C) GJM0335C1E4R8CB01D GJM1555C1H4R8CB01D 0.05pF(W) GJM0335C1E4R9WB01D GJM1555C1H4R9WB01D 0.1pF(B) GJM0335C1E4R9BB01D GJM1555C1H4R9BB01D 0.25pF(C) GJM0335C1E4R9CB01D GJM1555C1H4R9CB01D 0.05pF(W) GJM0335C1E5R0WB01D GJM1555C1H5R0WB01D 0.1pF(B) GJM0335C1E5R0BB01D GJM1555C1H5R0BB01D 0.25pF(C) GJM0335C1E5R0CB01D GJM1555C1H5R0CB01D 0.05pF(W) GJM0335C1E5R1WB01D GJM1555C1H5R1WB01D 0.1pF(B) GJM0335C1E5R1BB01D GJM1555C1H5R1BB01D 0.25pF(C) GJM0335C1E5R1CB01D GJM1555C1H5R1CB01D 0.5pF(D) GJM0335C1E5R1DB01D GJM1555C1H5R1DB01D The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series 0.05pF(W) Low ESL LLp Series 3.8pF(3R8) Part Number High-Q GJM Series 3.7pF(3R7) 50(1H) Tolerance High Frequency GQM Series 3.6pF(3R6) 1.0x0.5(15)<0402> 25(1E) Monolithic Microchip GMA Series Capacitance 0.6x0.3(03)<0201> For Bonding GMD Series Rated Volt. [Vdc] Product Information LxW [mm] For General GRM Series Temperature Compensating Type C0G(5C) Characteristics < >: EIA [inch] Code 91 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics LxW [mm] Capacitance 1.0x0.5(15)<0402> 25(1E) 50(1H) Tolerance Array GNM Series 5.2pF(5R2) 5.3pF(5R3) Low ESL LLp Series 5.4pF(5R4) 5.5pF(5R5) High-Q GJM Series 5.6pF(5R6) 5.7pF(5R7) High Frequency GQM Series 5.8pF(5R8) Monolithic Microchip GMA Series 5.9pF(5R9) 6.0pF(6R0) For Bonding GMD Series 6.1pF(6R1) 6.2pF(6R2) 6.3pF(6R3) Product Information 0.6x0.3(03)<0201> Rated Volt. [Vdc] Part Number 0.05pF(W) GJM0335C1E5R2WB01D GJM1555C1H5R2WB01D 0.1pF(B) GJM0335C1E5R2BB01D GJM1555C1H5R2BB01D 0.25pF(C) GJM0335C1E5R2CB01D GJM1555C1H5R2CB01D 0.5pF(D) GJM0335C1E5R2DB01D GJM1555C1H5R2DB01D 0.05pF(W) GJM0335C1E5R3WB01D GJM1555C1H5R3WB01D 0.1pF(B) GJM0335C1E5R3BB01D GJM1555C1H5R3BB01D 0.25pF(C) GJM0335C1E5R3CB01D GJM1555C1H5R3CB01D 0.5pF(D) GJM0335C1E5R3DB01D GJM1555C1H5R3DB01D 0.05pF(W) GJM0335C1E5R4WB01D GJM1555C1H5R4WB01D 0.1pF(B) GJM0335C1E5R4BB01D GJM1555C1H5R4BB01D 0.25pF(C) GJM0335C1E5R4CB01D GJM1555C1H5R4CB01D 0.5pF(D) GJM0335C1E5R4DB01D GJM1555C1H5R4DB01D 0.05pF(W) GJM0335C1E5R5WB01D GJM1555C1H5R5WB01D 0.1pF(B) GJM0335C1E5R5BB01D GJM1555C1H5R5BB01D 0.25pF(C) GJM0335C1E5R5CB01D GJM1555C1H5R5CB01D 0.5pF(D) GJM0335C1E5R5DB01D GJM1555C1H5R5DB01D 0.05pF(W) GJM0335C1E5R6WB01D GJM1555C1H5R6WB01D 0.1pF(B) GJM0335C1E5R6BB01D GJM1555C1H5R6BB01D 0.25pF(C) GJM0335C1E5R6CB01D GJM1555C1H5R6CB01D 0.5pF(D) GJM0335C1E5R6DB01D GJM1555C1H5R6DB01D 0.05pF(W) GJM0335C1E5R7WB01D GJM1555C1H5R7WB01D 0.1pF(B) GJM0335C1E5R7BB01D GJM1555C1H5R7BB01D 0.25pF(C) GJM0335C1E5R7CB01D GJM1555C1H5R7CB01D 0.5pF(D) GJM0335C1E5R7DB01D GJM1555C1H5R7DB01D 0.05pF(W) GJM0335C1E5R8WB01D GJM1555C1H5R8WB01D 0.1pF(B) GJM0335C1E5R8BB01D GJM1555C1H5R8BB01D 0.25pF(C) GJM0335C1E5R8CB01D GJM1555C1H5R8CB01D 0.5pF(D) GJM0335C1E5R8DB01D GJM1555C1H5R8DB01D 0.05pF(W) GJM0335C1E5R9WB01D GJM1555C1H5R9WB01D 0.1pF(B) GJM0335C1E5R9BB01D GJM1555C1H5R9BB01D 0.25pF(C) GJM0335C1E5R9CB01D GJM1555C1H5R9CB01D 0.5pF(D) GJM0335C1E5R9DB01D GJM1555C1H5R9DB01D 0.05pF(W) GJM0335C1E6R0WB01D GJM1555C1H6R0WB01D 0.1pF(B) GJM0335C1E6R0BB01D GJM1555C1H6R0BB01D 0.25pF(C) GJM0335C1E6R0CB01D GJM1555C1H6R0CB01D 0.5pF(D) GJM0335C1E6R0DB01D GJM1555C1H6R0DB01D 0.05pF(W) GJM0335C1E6R1WB01D GJM1555C1H6R1WB01D 0.1pF(B) GJM0335C1E6R1BB01D GJM1555C1H6R1BB01D 0.25pF(C) GJM0335C1E6R1CB01D GJM1555C1H6R1CB01D 0.5pF(D) GJM0335C1E6R1DB01D GJM1555C1H6R1DB01D 0.05pF(W) GJM0335C1E6R2WB01D GJM1555C1H6R2WB01D 0.1pF(B) GJM0335C1E6R2BB01D GJM1555C1H6R2BB01D 0.25pF(C) GJM0335C1E6R2CB01D GJM1555C1H6R2CB01D 0.5pF(D) GJM0335C1E6R2DB01D GJM1555C1H6R2DB01D 0.05pF(W) GJM0335C1E6R3WB01D GJM1555C1H6R3WB01D 0.1pF(B) GJM0335C1E6R3BB01D GJM1555C1H6R3BB01D 0.25pF(C) GJM0335C1E6R3CB01D GJM1555C1H6R3CB01D 0.5pF(D) GJM0335C1E6R3DB01D GJM1555C1H6R3DB01D The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GJ M 03 3 5C 1E q w e r t y 5R2 W u i < >: EIA [inch] Code B01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 92 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6.7pF(6R7) 6.8pF(6R8) 6.9pF(6R9) 7.0pF(7R0) 7.1pF(7R1) 7.2pF(7R2) 7.3pF(7R3) 7.4pF(7R4) 7.5pF(7R5) 7.6pF(7R6) GJM0335C1E6R4WB01D GJM1555C1H6R4WB01D 0.1pF(B) GJM0335C1E6R4BB01D GJM1555C1H6R4BB01D 0.25pF(C) GJM0335C1E6R4CB01D GJM1555C1H6R4CB01D 0.5pF(D) GJM0335C1E6R4DB01D GJM1555C1H6R4DB01D 0.05pF(W) GJM0335C1E6R5WB01D GJM1555C1H6R5WB01D 0.1pF(B) GJM0335C1E6R5BB01D GJM1555C1H6R5BB01D 0.25pF(C) GJM0335C1E6R5CB01D GJM1555C1H6R5CB01D 0.5pF(D) GJM0335C1E6R5DB01D GJM1555C1H6R5DB01D 0.05pF(W) GJM0335C1E6R6WB01D GJM1555C1H6R6WB01D 0.1pF(B) GJM0335C1E6R6BB01D GJM1555C1H6R6BB01D 0.25pF(C) GJM0335C1E6R6CB01D GJM1555C1H6R6CB01D 0.5pF(D) GJM0335C1E6R6DB01D GJM1555C1H6R6DB01D 0.05pF(W) GJM0335C1E6R7WB01D GJM1555C1H6R7WB01D 0.1pF(B) GJM0335C1E6R7BB01D GJM1555C1H6R7BB01D 0.25pF(C) GJM0335C1E6R7CB01D GJM1555C1H6R7CB01D 0.5pF(D) GJM0335C1E6R7DB01D GJM1555C1H6R7DB01D 0.05pF(W) GJM0335C1E6R8WB01D GJM1555C1H6R8WB01D 0.1pF(B) GJM0335C1E6R8BB01D GJM1555C1H6R8BB01D 0.25pF(C) GJM0335C1E6R8CB01D GJM1555C1H6R8CB01D 0.5pF(D) GJM0335C1E6R8DB01D GJM1555C1H6R8DB01D 0.05pF(W) GJM0336C1E6R9WB01D GJM1555C1H6R9WB01D 0.1pF(B) GJM0336C1E6R9BB01D GJM1555C1H6R9BB01D 0.25pF(C) GJM0336C1E6R9CB01D GJM1555C1H6R9CB01D 0.5pF(D) GJM0336C1E6R9DB01D GJM1555C1H6R9DB01D 0.05pF(W) GJM0336C1E7R0WB01D GJM1555C1H7R0WB01D 0.1pF(B) GJM0336C1E7R0BB01D GJM1555C1H7R0BB01D 0.25pF(C) GJM0336C1E7R0CB01D GJM1555C1H7R0CB01D 0.5pF(D) GJM0336C1E7R0DB01D GJM1555C1H7R0DB01D 0.05pF(W) GJM0336C1E7R1WB01D GJM1555C1H7R1WB01D 0.1pF(B) GJM0336C1E7R1BB01D GJM1555C1H7R1BB01D 0.25pF(C) GJM0336C1E7R1CB01D GJM1555C1H7R1CB01D 0.5pF(D) GJM0336C1E7R1DB01D GJM1555C1H7R1DB01D 0.05pF(W) GJM0336C1E7R2WB01D GJM1555C1H7R2WB01D 0.1pF(B) GJM0336C1E7R2BB01D GJM1555C1H7R2BB01D 0.25pF(C) GJM0336C1E7R2CB01D GJM1555C1H7R2CB01D 0.5pF(D) GJM0336C1E7R2DB01D GJM1555C1H7R2DB01D 0.05pF(W) GJM0336C1E7R3WB01D GJM1555C1H7R3WB01D 0.1pF(B) GJM0336C1E7R3BB01D GJM1555C1H7R3BB01D 0.25pF(C) GJM0336C1E7R3CB01D GJM1555C1H7R3CB01D 0.5pF(D) GJM0336C1E7R3DB01D GJM1555C1H7R3DB01D 0.05pF(W) GJM0336C1E7R4WB01D GJM1555C1H7R4WB01D 0.1pF(B) GJM0336C1E7R4BB01D GJM1555C1H7R4BB01D 0.25pF(C) GJM0336C1E7R4CB01D GJM1555C1H7R4CB01D 0.5pF(D) GJM0336C1E7R4DB01D GJM1555C1H7R4DB01D 0.05pF(W) GJM0336C1E7R5WB01D GJM1555C1H7R5WB01D 0.1pF(B) GJM0336C1E7R5BB01D GJM1555C1H7R5BB01D 0.25pF(C) GJM0336C1E7R5CB01D GJM1555C1H7R5CB01D 0.5pF(D) GJM0336C1E7R5DB01D GJM1555C1H7R5DB01D 0.05pF(W) GJM0336C1E7R6WB01D GJM1555C1H7R6WB01D 0.1pF(B) GJM0336C1E7R6BB01D GJM1555C1H7R6BB01D 0.25pF(C) GJM0336C1E7R6CB01D GJM1555C1H7R6CB01D 0.5pF(D) GJM0336C1E7R6DB01D GJM1555C1H7R6DB01D The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series 0.05pF(W) Low ESL LLp Series 6.6pF(6R6) Part Number High-Q GJM Series 6.5pF(6R5) 50(1H) Tolerance High Frequency GQM Series 6.4pF(6R4) 1.0x0.5(15)<0402> 25(1E) Monolithic Microchip GMA Series Capacitance 0.6x0.3(03)<0201> For Bonding GMD Series Rated Volt. [Vdc] Product Information LxW [mm] For General GRM Series Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics < >: EIA [inch] Code 93 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics LxW [mm] Capacitance 1.0x0.5(15)<0402> 25(1E) 50(1H) Tolerance Array GNM Series 7.7pF(7R7) 7.8pF(7R8) Low ESL LLp Series 7.9pF(7R9) 8.0pF(8R0) High-Q GJM Series 8.1pF(8R1) 8.2pF(8R2) High Frequency GQM Series 8.3pF(8R3) Monolithic Microchip GMA Series 8.4pF(8R4) 8.5pF(8R5) For Bonding GMD Series 8.6pF(8R6) 8.7pF(8R7) 8.8pF(8R8) Product Information 0.6x0.3(03)<0201> Rated Volt. [Vdc] Part Number 0.05pF(W) GJM0336C1E7R7WB01D GJM1555C1H7R7WB01D 0.1pF(B) GJM0336C1E7R7BB01D GJM1555C1H7R7BB01D 0.25pF(C) GJM0336C1E7R7CB01D GJM1555C1H7R7CB01D 0.5pF(D) GJM0336C1E7R7DB01D GJM1555C1H7R7DB01D 0.05pF(W) GJM0336C1E7R8WB01D GJM1555C1H7R8WB01D 0.1pF(B) GJM0336C1E7R8BB01D GJM1555C1H7R8BB01D 0.25pF(C) GJM0336C1E7R8CB01D GJM1555C1H7R8CB01D 0.5pF(D) GJM0336C1E7R8DB01D GJM1555C1H7R8DB01D 0.05pF(W) GJM0336C1E7R9WB01D GJM1555C1H7R9WB01D 0.1pF(B) GJM0336C1E7R9BB01D GJM1555C1H7R9BB01D 0.25pF(C) GJM0336C1E7R9CB01D GJM1555C1H7R9CB01D 0.5pF(D) GJM0336C1E7R9DB01D GJM1555C1H7R9DB01D 0.05pF(W) GJM0336C1E8R0WB01D GJM1555C1H8R0WB01D 0.1pF(B) GJM0336C1E8R0BB01D GJM1555C1H8R0BB01D 0.25pF(C) GJM0336C1E8R0CB01D GJM1555C1H8R0CB01D 0.5pF(D) GJM0336C1E8R0DB01D GJM1555C1H8R0DB01D 0.05pF(W) GJM0336C1E8R1WB01D GJM1555C1H8R1WB01D 0.1pF(B) GJM0336C1E8R1BB01D GJM1555C1H8R1BB01D 0.25pF(C) GJM0336C1E8R1CB01D GJM1555C1H8R1CB01D 0.5pF(D) GJM0336C1E8R1DB01D GJM1555C1H8R1DB01D 0.05pF(W) GJM0336C1E8R2WB01D GJM1555C1H8R2WB01D 0.1pF(B) GJM0336C1E8R2BB01D GJM1555C1H8R2BB01D 0.25pF(C) GJM0336C1E8R2CB01D GJM1555C1H8R2CB01D 0.5pF(D) GJM0336C1E8R2DB01D GJM1555C1H8R2DB01D 0.05pF(W) GJM0336C1E8R3WB01D GJM1555C1H8R3WB01D 0.1pF(B) GJM0336C1E8R3BB01D GJM1555C1H8R3BB01D 0.25pF(C) GJM0336C1E8R3CB01D GJM1555C1H8R3CB01D 0.5pF(D) GJM0336C1E8R3DB01D GJM1555C1H8R3DB01D 0.05pF(W) GJM0336C1E8R4WB01D GJM1555C1H8R4WB01D 0.1pF(B) GJM0336C1E8R4BB01D GJM1555C1H8R4BB01D 0.25pF(C) GJM0336C1E8R4CB01D GJM1555C1H8R4CB01D 0.5pF(D) GJM0336C1E8R4DB01D GJM1555C1H8R4DB01D 0.05pF(W) GJM0336C1E8R5WB01D GJM1555C1H8R5WB01D 0.1pF(B) GJM0336C1E8R5BB01D GJM1555C1H8R5BB01D 0.25pF(C) GJM0336C1E8R5CB01D GJM1555C1H8R5CB01D 0.5pF(D) GJM0336C1E8R5DB01D GJM1555C1H8R5DB01D 0.05pF(W) GJM0336C1E8R6WB01D GJM1555C1H8R6WB01D 0.1pF(B) GJM0336C1E8R6BB01D GJM1555C1H8R6BB01D 0.25pF(C) GJM0336C1E8R6CB01D GJM1555C1H8R6CB01D 0.5pF(D) GJM0336C1E8R6DB01D GJM1555C1H8R6DB01D 0.05pF(W) GJM0336C1E8R7WB01D GJM1555C1H8R7WB01D 0.1pF(B) GJM0336C1E8R7BB01D GJM1555C1H8R7BB01D 0.25pF(C) GJM0336C1E8R7CB01D GJM1555C1H8R7CB01D 0.5pF(D) GJM0336C1E8R7DB01D GJM1555C1H8R7DB01D 0.05pF(W) GJM0336C1E8R8WB01D GJM1555C1H8R8WB01D 0.1pF(B) GJM0336C1E8R8BB01D GJM1555C1H8R8BB01D 0.25pF(C) GJM0336C1E8R8CB01D GJM1555C1H8R8CB01D 0.5pF(D) GJM0336C1E8R8DB01D GJM1555C1H8R8DB01D The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GJ M 03 3 6C 1E q w e r t y 7R7 W u i < >: EIA [inch] Code B01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 94 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 9.2pF(9R2) 9.3pF(9R3) 9.4pF(9R4) 9.5pF(9R5) 9.6pF(9R6) 9.7pF(9R7) 9.8pF(9R8) 9.9pF(9R9) GJM0336C1E8R9WB01D GJM1555C1H8R9WB01D 0.1pF(B) GJM0336C1E8R9BB01D GJM1555C1H8R9BB01D 0.25pF(C) GJM0336C1E8R9CB01D GJM1555C1H8R9CB01D 0.5pF(D) GJM0336C1E8R9DB01D GJM1555C1H8R9DB01D 0.05pF(W) GJM0336C1E9R0WB01D GJM1555C1H9R0WB01D 0.1pF(B) GJM0336C1E9R0BB01D GJM1555C1H9R0BB01D 0.25pF(C) GJM0336C1E9R0CB01D GJM1555C1H9R0CB01D 0.5pF(D) GJM0336C1E9R0DB01D GJM1555C1H9R0DB01D 0.05pF(W) GJM0336C1E9R1WB01D GJM1555C1H9R1WB01D 0.1pF(B) GJM0336C1E9R1BB01D GJM1555C1H9R1BB01D 0.25pF(C) GJM0336C1E9R1CB01D GJM1555C1H9R1CB01D 0.5pF(D) GJM0336C1E9R1DB01D GJM1555C1H9R1DB01D 0.05pF(W) GJM0336C1E9R2WB01D GJM1555C1H9R2WB01D 0.1pF(B) GJM0336C1E9R2BB01D GJM1555C1H9R2BB01D 0.25pF(C) GJM0336C1E9R2CB01D GJM1555C1H9R2CB01D 0.5pF(D) GJM0336C1E9R2DB01D GJM1555C1H9R2DB01D 0.05pF(W) GJM0336C1E9R3WB01D GJM1555C1H9R3WB01D 0.1pF(B) GJM0336C1E9R3BB01D GJM1555C1H9R3BB01D 0.25pF(C) GJM0336C1E9R3CB01D GJM1555C1H9R3CB01D 0.5pF(D) GJM0336C1E9R3DB01D GJM1555C1H9R3DB01D 0.05pF(W) GJM0336C1E9R4WB01D GJM1555C1H9R4WB01D 0.1pF(B) GJM0336C1E9R4BB01D GJM1555C1H9R4BB01D 0.25pF(C) GJM0336C1E9R4CB01D GJM1555C1H9R4CB01D 0.5pF(D) GJM0336C1E9R4DB01D GJM1555C1H9R4DB01D 0.05pF(W) GJM0336C1E9R5WB01D GJM1555C1H9R5WB01D 0.1pF(B) GJM0336C1E9R5BB01D GJM1555C1H9R5BB01D 0.25pF(C) GJM0336C1E9R5CB01D GJM1555C1H9R5CB01D 0.5pF(D) GJM0336C1E9R5DB01D GJM1555C1H9R5DB01D 0.05pF(W) GJM0336C1E9R6WB01D GJM1555C1H9R6WB01D 0.1pF(B) GJM0336C1E9R6BB01D GJM1555C1H9R6BB01D 0.25pF(C) GJM0336C1E9R6CB01D GJM1555C1H9R6CB01D 0.5pF(D) GJM0336C1E9R6DB01D GJM1555C1H9R6DB01D 0.05pF(W) GJM0336C1E9R7WB01D GJM1555C1H9R7WB01D 0.1pF(B) GJM0336C1E9R7BB01D GJM1555C1H9R7BB01D 0.25pF(C) GJM0336C1E9R7CB01D GJM1555C1H9R7CB01D 0.5pF(D) GJM0336C1E9R7DB01D GJM1555C1H9R7DB01D 0.05pF(W) GJM0336C1E9R8WB01D GJM1555C1H9R8WB01D 0.1pF(B) GJM0336C1E9R8BB01D GJM1555C1H9R8BB01D 0.25pF(C) GJM0336C1E9R8CB01D GJM1555C1H9R8CB01D 0.5pF(D) GJM0336C1E9R8DB01D GJM1555C1H9R8DB01D 0.05pF(W) GJM0336C1E9R9WB01D GJM1555C1H9R9WB01D 0.1pF(B) GJM0336C1E9R9BB01D GJM1555C1H9R9BB01D 0.25pF(C) GJM0336C1E9R9CB01D GJM1555C1H9R9CB01D 0.5pF(D) GJM0336C1E9R9DB01D GJM1555C1H9R9DB01D The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series 0.05pF(W) Low ESL LLp Series 9.1pF(9R1) Part Number High-Q GJM Series 9.0pF(9R0) 50(1H) Tolerance High Frequency GQM Series 8.9pF(8R9) 1.0x0.5(15)<0402> 25(1E) Monolithic Microchip GMA Series Capacitance 0.6x0.3(03)<0201> For Bonding GMD Series Rated Volt. [Vdc] < >: EIA [inch] Code Product Information LxW [mm] For General GRM Series Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics 95 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics 0.6x0.3(03)<0201> LxW [mm] 25(1E) Rated Volt. [Vdc] Capacitance Tolerance GJM0336C1E100GB01D 5%(J) GJM0336C1E100JB01D GJM1555C1H100JB01D 11pF(110) 2%(G) GJM0336C1E110GB01D GJM1555C1H110GB01D 5%(J) GJM0336C1E110JB01D GJM1555C1H110JB01D 12pF(120) 2%(G) GJM0336C1E120GB01D GJM1555C1H120GB01D 5%(J) GJM0336C1E120JB01D GJM1555C1H120JB01D 13pF(130) 2%(G) GJM0336C1E130GB01D GJM1555C1H130GB01D 5%(J) GJM0336C1E130JB01D GJM1555C1H130JB01D 15pF(150) 2%(G) GJM0336C1E150GB01D GJM1555C1H150GB01D 5%(J) GJM0336C1E150JB01D GJM1555C1H150JB01D 2%(G) GJM0336C1E160GB01D GJM1555C1H160GB01D 5%(J) GJM0336C1E160JB01D GJM1555C1H160JB01D 18pF(180) 2%(G) GJM0336C1E180GB01D GJM1555C1H180GB01D 5%(J) GJM0336C1E180JB01D GJM1555C1H180JB01D 20pF(200) 2%(G) GJM0336C1E200GB01D GJM1555C1H200GB01D 5%(J) GJM0336C1E200JB01D GJM1555C1H200JB01D Array GNM Series Low ESL LLp Series 16pF(160) 22pF(220) High-Q GJM Series 50(1H) Part Number 2%(G) 10pF(100) GJM1555C1H100GB01D 2%(G) GJM0335C0J220GB01D 5%(J) GJM0335C0J220JB01D 24pF(240) 2%(G) GJM0335C0J240GB01D 5%(J) GJM0335C0J240JB01D 27pF(270) 2%(G) GJM0335C0J270GB01D 5%(J) GJM0335C0J270JB01D 30pF(300) 2%(G) GJM0335C0J300GB01D 5%(J) GJM0335C0J300JB01D 33pF(330) 2%(G) GJM0335C0J330GB01D 5%(J) GJM0335C0J330JB01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series 1.0x0.5(15)<0402> 6.3(0J) (Part Number) GJ M 03 3 6C 1E q w e r t y 100 G u i B01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 96 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 Specifications Test Method Temperature Compensating Type Operating Temperature Range Y55 to W125D Reference Temperature: 25D (2C, 3C, 4C: 20D) 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimensions Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when 300% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance 10,000M min. or 500 * F min. (whichever is smaller) (I.R.) 7 Capacitance Within the specified tolerance 8 Q 30pF and over: QU1000 30pF and below: QU400W20C C: Nominal Capacitance (pF) Temperature Coefficient 9 Capacitance Temperature Characteristics Capacitance Drift Within the specified tolerance (Table A) Within T0.2% or T0.05pF (whichever is larger.) Low ESL LLp Series The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25D and 75%RH max. and within 2 minutes of charging. The capacitance/Q should be measured at 25D at the frequency and voltage shown in the table. 1T0.1MHz Frequency 0.5 to 5Vrms Voltage The capacitance change should be measured after 5 min. at each specified temperature stage. Temperature Compensating Type The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5, (5C: W25 to 125D: other temp. coeffs.: W20 to 125D) the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as in Table A. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in steps 1, 3 and 5 by the capacitance value in step 3. Step 1 Temperature (D) Reference Temp. T2 2 Y55T3 3 Reference Temp. T2 4 125T3 5 Reference Temp. T2 Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 1 using a eutectic solder. Then apply a 5N* force in parallel with the test jig for 10T1 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *2N (GJM03) For Bonding GMD Series No removal of the terminations or other defect should occur. Solder resist Baked electrode or copper foil Type GJM03 GJM15 a 0.3 0.4 b 0.9 1.5 c 0.3 0.5 (in mm) Product Information Adhesive Strength of Termination a 10 b c High-Q GJM Series 1 High Frequency GQM Series Item Monolithic Microchip GMA Series No. Array GNM Series For General GRM Series GJM Series Specifications and Test Methods (1) Specifications and Test Methods GJM Series Fig. 1 Continued on the following page. 97 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 Continued from the preceding page. Specifications No. Item Test Method Temperature Compensating Type No defects or abnormalities Capacitance Within the specified tolerance Q 30pF and over: QU1000 30pF and below: QU400W20C C: Nominal Capacitance (pF) Appearance No marking defects Capacitance Change Within T5% or T0.5pF (whichever is larger) Vibration Resistance b 12 Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). 4.5 c Deflection Solder the capacitor to the test jig (glass epoxy boards) shown in Fig. 2 using a eutectic solder. Then apply a force in the direction shown in Fig. 3. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 20 40 11 Appearance VWZ[(c)XT_\|U(R)]YZSTW,QRV^[ Y]^(R)Z Low ESL LLp Series Array GNM Series For General GRM Series GJM Series Specifications and Test Methods (1) R230 a t: 0.8mm 100 High-Q GJM Series Type GJM03 GJM15 b 0.9 1.5 c 0.3 0.5 Flexure : V1 Capacitance meter 45 45 (in mm) (in mm) Fig. 2 Fig. 3 13 Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120D for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 2T0.5 seconds at 230T5D or Sn-3.0Ag-0.5Cu solder solution for 20.5 seconds at 2455C. The measured and observed characteristics should satisfy the specifications in the following table. Resistance 14 to Soldering Heat Monolithic Microchip GMA Series High Frequency GQM Series a 0.3 0.4 50 Pressurizing speed: 1.0mm/sec. Pressurize Appearance No marking defects Capacitance Change Within T2.5% or T0.25pF (whichever is larger) Q 30pF and over: QU1000 30pF and below: QU400W20C C: Nominal Capacitance (pF) I.R. More than 10,000M or 500 * F (whichever is smaller) Dielectric Strength No failure Preheat the capacitor at 120 to 150D for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 270T5D for 10T0.5 seconds. Let sit at room temperature for 24T2 hours. The measured and observed characteristics should satisfy the specifications in the following table. For Bonding GMD Series 15 Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 24T2 hours at room temperature, then measure. Appearance No marking defects Capacitance Change Within T2.5% or T0.25pF (whichever is larger) Q 30pF and over: QU1000 30pF and below: QU400W20C C: Nominal Capacitance (pF) Temp. (D) I.R. More than 10,000M or 500 * F (whichever is smaller) Time (min.) Dielectric Strength No failure Temperature Cycle Step 1 2 3 4 Min. Operating Room Max. Operating Room Temp.W0/Y3 Temp. Temp.W3/Y0 Temp. 30T3 2 to 3 30T3 2 to 3 Product Information The measured and observed characteristics should satisfy the specifications in the following table. 16 Humidity, Steady State Appearance No marking defects Capacitance Change Within T5% or T0.5pF (whichever is larger) Q 30pF and below: QU350 10pF and over, 30pF and below: QU275W 5 2 C 10pF and below: QU200W10C C: Nominal Capacitance (pF) I.R. More than 10,000M or 500 * F (whichever is smaller) Let the capacitor sit at 40T2D and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours (temperature compensating type) at room temperature, then measure. Continued on the following page. 98 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 For General GRM Series GJM Series Specifications and Test Methods (1) Specifications and Test Methods GJM Series Continued from the preceding page. Specifications No. Item Test Method Temperature Compensating Type The measured and observed characteristics should satisfy the specifications in the following table. No marking defects Capacitance Change Within T7.5% or T0.75pF (whichever is larger) Q 30pF and over: QU200 30pF and below: QU100W 10 3 C C: Nominal Capacitance (pF) I.R. More than 500M or 25 * F (whichever is smaller) Apply the rated voltage at 40T2D and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours at room temperature, then measure. The charge/discharge current is less than 50mA. Array GNM Series 17 Humidity Load Appearance 19 ESR No marking defects Capacitance Change Within T3% or T0.3pF (whichever is larger) Q 30pF and over: QU350 10pF and over, 30pF and below: QU275W 5 2 C 10pF and below: QU200W10C C: Nominal Capacitance (pF) I.R. More than 1,000M or 50 * F (whichever is smaller) Apply 200% of the rated voltage for 1000T12 hours at the maximum operating temperature T3D. Let sit for 24T2 hours (temperature compensating type) at room temperature, then measure. The charge/discharge current is less than 50mA. 0.1pFVCV1pF: 350m * pF below 1pFFCV5pF: 300m below 5pFFCV10pF: 250m below The ESR should be measured at room temperature, and frequency 1T0.2GHz with the equivalent of BOONTON Model 34A. 10pFFCV33pF: 400m below The ESR should be measured at room temperature, and frequency 500T50MHz with the equivalent of HP8753B. High-Q GJM Series 18 High Temperature Load Appearance Low ESL LLp Series The measured and observed characteristics should satisfy the specifications in the following table. Table A High Frequency GQM Series (1) Capacitance Change from 25D Value (%) Char. Code Temp. Coeff. (ppm/D) *1 Y30D Y55D Max. Min. Y0.24 0T30 0.58 5C Y0.48 0T60 0.87 6C *1: Nominal values denote the temperature coefficient within a range of 25 to 125D. Max. 0.40 0.60 Y10D Min. Y0.17 Y0.33 Max. 0.25 0.38 Min. Y0.11 Y0.21 Monolithic Microchip GMA Series (2) Capacitance Change from 20D Value (%) Y25D Y55D Max. Min. Y0.45 0T60 0.82 2C Y0.90 0T120 1.37 3C Y1.88 0T250 2.56 4C *2: Nominal values denote the temperature coefficient within a range of 20 to 125D. Max. 0.49 0.82 1.54 Y10D Min. Y0.27 Y0.54 Y1.13 Max. 0.33 0.55 1.02 Min. Y0.18 Y0.36 Y0.75 For Bonding GMD Series Nominal Values (ppm/D) *2 Product Information Char. 99 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors High Frequency GQM Series e g e 1. HiQ and low ESR at VHF, UHF, Microwave 2. Feature improvement, low power consumption for mobile telecommunication. (Base station, terminal, etc.) Applications Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series High frequency circuit (Mobile telecommunication, etc.) 100 T Array GNM Series Features L Part Number GQM187 GQM188 GQM219 (50,100V) GQM219 (250V) GQM22M L 1.6 0.15 1.6 0.1 2.0 0.1 2.0 0.15 2.8 0.5 W Dimensions (mm) W T e g min. 0.8 0.15 0.7 0.1 0.2 to 0.5 0.5 0.8 0.1 0.8 0.1 0.2 to 0.5 0.5 1.25 0.1 0.85 0.1 0.2 to 0.7 0.7 1.25 0.15 0.85 0.15 0.2 to 0.7 0.7 2.8 0.4 1.15 0.2 0.3 min. 1.0 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics ex.7: T Dimension [mm] 2.0x1.25 (21) <0805> 2.8x2.8 (22) <1111> Rated Voltage 250 100 50 250 100 50 500 [Vdc] (2E) (2A) (1H) (2E) (2A) (1H) (2H) Capacitance 1.6x0.8 (18) <0603> LxW [mm] 2.0x1.25 (21) <0805> 2.8x2.8 (22) <1111> Rated Voltage 250 100 50 250 100 50 500 [Vdc] (2E) (2A) (1H) (2E) (2A) (1H) (2H) Capacitance 0.10pF(R10) 7 36pF(360) 7 8 9 9 M 0.20pF(R20) 7 39pF(390) 7 8 9 9 M 0.30pF(R30) 7 43pF(430) 7 8 9 9 M 0.40pF(R40) 7 47pF(470) 7 8 9 9 M 0.50pF(R50) 7 8 9 9 M 51pF(510) 8 9 9 M 0.75pF(R75) 7 8 9 9 M 56pF(560) 8 9 9 M 1.0pF(1R0) 7 8 9 9 M 62pF(620) 8 9 9 M M 7 8 9 68pF(680) 8 9 9 M 1.2pF(1R2) 7 8 9 9 M 75pF(750) 8 9 9 M 1.3pF(1R3) 7 8 9 9 M 82pF(820) 8 9 9 M 1.5pF(1R5) 7 8 9 9 M 91pF(910) 8 9 9 M 1.6pF(1R6) 7 8 9 9 M 100pF(101) 8 9 9 M 1.8pF(1R8) 7 8 9 9 M 2.0pF(2R0) 7 8 9 9 M 2.2pF(2R2) 7 8 9 9 M 2.4pF(2R4) 7 8 9 9 M 2.7pF(2R7) 7 8 9 9 M 3.0pF(3R0) 7 8 9 9 M 3.3pF(3R3) 7 8 9 9 M 3.6pF(3R6) 7 8 9 9 M 3.9pF(3R9) 7 8 9 9 M 4.0pF(4R0) 7 8 9 9 M 4.3pF(4R3) 7 8 9 9 M 4.7pF(4R7) 7 8 9 9 M 5.0pF(5R0) 7 8 9 9 M 5.1pF(5R1) 7 8 9 9 M 5.6pF(5R6) 7 8 9 9 M 6.0pF(6R0) 7 8 9 9 M 9 9 M 8 6.8pF(6R8) 7 8 9 9 M 7.0pF(7R0) 7 8 9 9 M 7.5pF(7R5) 7 8 9 9 M 8.0pF(8R0) 7 8 9 9 M 8.2pF(8R2) 7 8 9 9 M 9.0pF(9R0) 7 8 9 9 M 9.1pF(9R1) 7 8 9 9 M 10pF(100) 7 8 9 9 M 11pF(110) 7 8 9 9 M 12pF(120) 7 8 9 9 M 13pF(130) 7 8 9 9 M 15pF(150) 7 8 9 9 M 16pF(160) 7 8 9 9 M 18pF(180) 7 8 9 9 20pF(200) 7 8 9 9 M 22pF(220) 7 8 9 9 M 24pF(240) 7 8 9 9 M 27pF(270) 7 8 9 9 M 30pF(300) 7 8 9 9 M 33pF(330) 7 8 9 9 M The part number code is shown in ( ) and Unit is shown in [ ]. High Frequency GQM Series Monolithic Microchip GMA Series 7 For Bonding GMD Series 6.2pF(6R2) High-Q GJM Series 1.1pF(1R1) 9 Array GNM Series 1.6x0.8 (18) <0603> LxW [mm] Low ESL LLp Series 7 For General GRM Series Capacitance Table Product Information M < >: EIA [inch] Code 101 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 1.6x0.8(18)<0603> LxW [mm] Array GNM Series Capacitance Tolerance 0.1pF(B) GQM1875C2ER10BB12D 0.20pF(R20) 0.1pF(B) GQM1875C2ER20BB12D 0.30pF(R30) 0.1pF(B) GQM1875C2ER30BB12D 0.25pF(C) GQM1875C2ER30CB12D 0.1pF(B) GQM1875C2ER40BB12D 0.25pF(C) GQM1875C2ER40CB12D 0.1pF(B) GQM1875C2ER50BB12D GQM1885C2AR50BB01D 0.25pF(C) GQM1875C2ER50CB12D GQM1885C2AR50CB01D 0.1pF(B) GQM1875C2ER75BB12D GQM1885C2AR75BB01D 0.25pF(C) GQM1875C2ER75CB12D GQM1885C2AR75CB01D 0.40pF(R40) 0.50pF(R50) Low ESL LLp Series 1.0pF(1R0) 1.1pF(1R1) 1.2pF(1R2) High-Q GJM Series 1.3pF(1R3) 1.5pF(1R5) 1.6pF(1R6) 1.8pF(1R8) High Frequency GQM Series 2.0pF(2R0) 2.2pF(2R2) 2.4pF(2R4) Monolithic Microchip GMA Series 2.7pF(2R7) 3.0pF(3R0) 3.3pF(3R3) 3.6pF(3R6) 3.9pF(3R9) For Bonding GMD Series 100(2A) Part Number 0.10pF(R10) 0.75pF(R75) 4.0pF(4R0) 4.3pF(4R3) 4.7pF(4R7) Product Information 250(2E) Rated Volt. [Vdc] 5.0pF(5R0) 0.1pF(B) GQM1875C2E1R0BB12D GQM1885C2A1R0BB01D 0.25pF(C) GQM1875C2E1R0CB12D GQM1885C2A1R0CB01D 0.1pF(B) GQM1875C2E1R1BB12D GQM1885C2A1R1BB01D 0.25pF(C) GQM1875C2E1R1CB12D GQM1885C2A1R1CB01D 0.1pF(B) GQM1875C2E1R2BB12D GQM1885C2A1R2BB01D 0.25pF(C) GQM1875C2E1R2CB12D GQM1885C2A1R2CB01D 0.1pF(B) GQM1875C2E1R3BB12D GQM1885C2A1R3BB01D 0.25pF(C) GQM1875C2E1R3CB12D GQM1885C2A1R3CB01D 0.1pF(B) GQM1875C2E1R5BB12D GQM1885C2A1R5BB01D 0.25pF(C) GQM1875C2E1R5CB12D GQM1885C2A1R5CB01D 0.1pF(B) GQM1875C2E1R6BB12D GQM1885C2A1R6BB01D 0.25pF(C) GQM1875C2E1R6CB12D GQM1885C2A1R6CB01D 0.1pF(B) GQM1875C2E1R8BB12D GQM1885C2A1R8BB01D 0.25pF(C) GQM1875C2E1R8CB12D GQM1885C2A1R8CB01D 0.1pF(B) GQM1875C2E2R0BB12D GQM1885C2A2R0BB01D 0.25pF(C) GQM1875C2E2R0CB12D GQM1885C2A2R0CB01D 0.1pF(B) GQM1875C2E2R2BB12D GQM1885C2A2R2BB01D 0.25pF(C) GQM1875C2E2R2CB12D GQM1885C2A2R2CB01D 0.1pF(B) GQM1875C2E2R4BB12D GQM1885C2A2R4BB01D 0.25pF(C) GQM1875C2E2R4CB12D GQM1885C2A2R4CB01D 0.1pF(B) GQM1875C2E2R7BB12D GQM1885C2A2R7BB01D 0.25pF(C) GQM1875C2E2R7CB12D GQM1885C2A2R7CB01D 0.1pF(B) GQM1875C2E3R0BB12D GQM1885C2A3R0BB01D 0.25pF(C) GQM1875C2E3R0CB12D GQM1885C2A3R0CB01D 0.1pF(B) GQM1875C2E3R3BB12D GQM1885C2A3R3BB01D 0.25pF(C) GQM1875C2E3R3CB12D GQM1885C2A3R3CB01D 0.1pF(B) GQM1875C2E3R6BB12D GQM1885C2A3R6BB01D 0.25pF(C) GQM1875C2E3R6CB12D GQM1885C2A3R6CB01D 0.1pF(B) GQM1875C2E3R9BB12D GQM1885C2A3R9BB01D 0.25pF(C) GQM1875C2E3R9CB12D GQM1885C2A3R9CB01D 0.1pF(B) GQM1875C2E4R0BB12D GQM1885C2A4R0BB01D 0.25pF(C) GQM1875C2E4R0CB12D GQM1885C2A4R0CB01D 0.1pF(B) GQM1875C2E4R3BB12D GQM1885C2A4R3BB01D 0.25pF(C) GQM1875C2E4R3CB12D GQM1885C2A4R3CB01D 0.1pF(B) GQM1875C2E4R7BB12D GQM1885C2A4R7BB01D 0.25pF(C) GQM1875C2E4R7CB12D GQM1885C2A4R7CB01D 0.1pF(B) GQM1875C2E5R0BB12D GQM1885C2A5R0BB01D 0.25pF(C) GQM1875C2E5R0CB12D GQM1885C2A5R0CB01D The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GQ M q w 18 7 5C 2E e r t y R10 B u i < >: EIA [inch] Code B12 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 102 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1.6x0.8(18)<0603> LxW [mm] 250(2E) 100(2A) 50(1H) Part Number GQM1875C2E5R1CB12D GQM1885C2A5R1CB01D 0.5pF(D) GQM1875C2E5R1DB12D GQM1885C2A5R1DB01D 0.25pF(C) GQM1875C2E5R6CB12D GQM1885C2A5R6CB01D 0.5pF(D) GQM1875C2E5R6DB12D GQM1885C2A5R6DB01D 6.0pF(6R0) 0.25pF(C) GQM1875C2E6R0CB12D GQM1885C2A6R0CB01D 0.5pF(D) GQM1875C2E6R0DB12D GQM1885C2A6R0DB01D 6.2pF(6R2) 0.25pF(C) GQM1875C2E6R2CB12D GQM1885C2A6R2CB01D 0.5pF(D) GQM1875C2E6R2DB12D GQM1885C2A6R2DB01D 0.25pF(C) GQM1875C2E6R8CB12D GQM1885C2A6R8CB01D 0.5pF(D) GQM1875C2E6R8DB12D GQM1885C2A6R8DB01D 0.25pF(C) GQM1875C2E7R0CB12D GQM1885C1H7R0CB01D 0.5pF(D) GQM1875C2E7R0DB12D GQM1885C1H7R0DB01D 0.25pF(C) GQM1875C2E7R5CB12D GQM1885C1H7R5CB01D 0.5pF(D) GQM1875C2E7R5DB12D GQM1885C1H7R5DB01D 0.25pF(C) GQM1875C2E8R0CB12D GQM1885C1H8R0CB01D 0.5pF(D) GQM1875C2E8R0DB12D GQM1885C1H8R0DB01D 0.25pF(C) GQM1875C2E8R2CB12D GQM1885C1H8R2CB01D 0.5pF(D) GQM1875C2E8R2DB12D GQM1885C1H8R2DB01D 0.25pF(C) GQM1875C2E9R0CB12D GQM1885C1H9R0CB01D 0.5pF(D) GQM1875C2E9R0DB12D GQM1885C1H9R0DB01D 0.25pF(C) GQM1875C2E9R1CB12D GQM1885C1H9R1CB01D 0.5pF(D) GQM1875C2E9R1DB12D GQM1885C1H9R1DB01D 2%(G) GQM1875C2E100GB12D GQM1885C1H100GB01D 5%(J) GQM1875C2E100JB12D GQM1885C1H100JB01D 2%(G) GQM1875C2E110GB12D GQM1885C1H110GB01D 5%(J) GQM1875C2E110JB12D GQM1885C1H110JB01D 2%(G) GQM1875C2E120GB12D GQM1885C1H120GB01D 5%(J) GQM1875C2E120JB12D GQM1885C1H120JB01D 13pF(130) 2%(G) GQM1875C2E130GB12D GQM1885C1H130GB01D 5%(J) GQM1875C2E130JB12D GQM1885C1H130JB01D 15pF(150) 2%(G) GQM1875C2E150GB12D GQM1885C1H150GB01D 5%(J) GQM1875C2E150JB12D GQM1885C1H150JB01D 2%(G) GQM1875C2E160GB12D GQM1885C1H160GB01D 5%(J) GQM1875C2E160JB12D GQM1885C1H160JB01D 18pF(180) 2%(G) GQM1875C2E180GB12D GQM1885C1H180GB01D 5%(J) GQM1875C2E180JB12D GQM1885C1H180JB01D 20pF(200) 2%(G) GQM1875C2E200GB12D GQM1885C1H200GB01D 5%(J) GQM1875C2E200JB12D GQM1885C1H200JB01D 22pF(220) 2%(G) GQM1875C2E220GB12D GQM1885C1H220GB01D 5%(J) GQM1875C2E220JB12D GQM1885C1H220JB01D 24pF(240) 2%(G) GQM1875C2E240GB12D GQM1885C1H240GB01D 5%(J) GQM1875C2E240JB12D GQM1885C1H240JB01D 2%(G) GQM1875C2E270GB12D GQM1885C1H270GB01D 5%(J) GQM1875C2E270JB12D GQM1885C1H270JB01D 2%(G) GQM1875C2E300GB12D GQM1885C1H300GB01D 5%(J) GQM1875C2E300JB12D GQM1885C1H300JB01D 8.0pF(8R0) 8.2pF(8R2) 9.0pF(9R0) 9.1pF(9R1) 10pF(100) 11pF(110) 12pF(120) 16pF(160) 27pF(270) 30pF(300) The part number code is shown in ( ) and Unit is shown in [ ]. Low ESL LLp Series 7.5pF(7R5) High-Q GJM Series 7.0pF(7R0) High Frequency GQM Series 6.8pF(6R8) Monolithic Microchip GMA Series 5.6pF(5R6) Array GNM Series 0.25pF(C) 5.1pF(5R1) For Bonding GMD Series Tolerance Product Information Rated Volt. [Vdc] Capacitance For General GRM Series Temperature Compensating Type C0G(5C) Characteristics < >: EIA [inch] Code 103 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 1.6x0.8(18)<0603> LxW [mm] Capacitance Tolerance GQM1875C2E330GB12D 5%(J) GQM1875C2E330JB12D GQM1885C1H330JB01D 36pF(360) 2%(G) GQM1875C2E360GB12D GQM1885C1H360GB01D 5%(J) GQM1875C2E360JB12D GQM1885C1H360JB01D 39pF(390) 2%(G) GQM1875C2E390GB12D GQM1885C1H390GB01D 5%(J) GQM1875C2E390JB12D GQM1885C1H390JB01D 43pF(430) 2%(G) GQM1875C2E430GB12D GQM1885C1H430GB01D 5%(J) GQM1875C2E430JB12D GQM1885C1H430JB01D 47pF(470) 2%(G) GQM1875C2E470GB12D GQM1885C1H470GB01D 5%(J) GQM1875C2E470JB12D GQM1885C1H470JB01D Array GNM Series Low ESL LLp Series 51pF(510) GQM1885C1H330GB01D 2%(G) GQM1885C1H510GB01D 5%(J) GQM1885C1H510JB01D 56pF(560) 2%(G) GQM1885C1H560GB01D 5%(J) GQM1885C1H560JB01D 62pF(620) 2%(G) GQM1885C1H620GB01D 5%(J) GQM1885C1H620JB01D 2%(G) GQM1885C1H680GB01D 68pF(680) High-Q GJM Series 50(1H) Part Number 2%(G) 33pF(330) 5%(J) GQM1885C1H680JB01D 75pF(750) 2%(G) GQM1885C1H750GB01D 5%(J) GQM1885C1H750JB01D 82pF(820) 2%(G) GQM1885C1H820GB01D 5%(J) GQM1885C1H820JB01D 91pF(910) 2%(G) GQM1885C1H910GB01D 5%(J) GQM1885C1H910JB01D 100pF(101) 2%(G) GQM1885C1H101GB01D 5%(J) GQM1885C1H101JB01D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series 250(2E) Rated Volt. [Vdc] (Part Number) GQ M q w 18 7 5C 2E e r t y 330 G u i B12 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 104 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2.0x1.25(21)<0805> LxW [mm] 250(2E) 1.2pF(1R2) 1.3pF(1R3) 1.5pF(1R5) 1.6pF(1R6) 1.8pF(1R8) 2.0pF(2R0) 2.2pF(2R2) 2.4pF(2R4) 2.7pF(2R7) 3.0pF(3R0) 3.3pF(3R3) 3.6pF(3R6) 3.9pF(3R9) 4.0pF(4R0) 4.3pF(4R3) 4.7pF(4R7) 5.0pF(5R0) 5.1pF(5R1) 5.6pF(5R6) 6.0pF(6R0) GQM22M5C2HR50BB01L GQM2195C2AR50CB01D GQM22M5C2HR50CB01L 0.1pF(B) GQM2195C2ER75BB12D GQM2195C2AR75BB01D GQM22M5C2HR75BB01L 0.25pF(C) GQM2195C2ER75CB12D GQM2195C2AR75CB01D GQM22M5C2HR75CB01L 0.1pF(B) GQM2195C2E1R0BB12D GQM2195C2A1R0BB01D GQM22M5C2H1R0BB01L 0.25pF(C) GQM2195C2E1R0CB12D GQM2195C2A1R0CB01D GQM22M5C2H1R0CB01L 0.1pF(B) GQM2195C2E1R1BB12D GQM2195C2A1R1BB01D GQM22M5C2H1R1BB01L 0.25pF(C) GQM2195C2E1R1CB12D GQM2195C2A1R1CB01D GQM22M5C2H1R1CB01L 0.1pF(B) GQM2195C2E1R2BB12D GQM2195C2A1R2BB01D GQM22M5C2H1R2BB01L 0.25pF(C) GQM2195C2E1R2CB12D GQM2195C2A1R2CB01D GQM22M5C2H1R2CB01L 0.1pF(B) GQM2195C2E1R3BB12D GQM2195C2A1R3BB01D GQM22M5C2H1R3BB01L 0.25pF(C) GQM2195C2E1R3CB12D GQM2195C2A1R3CB01D GQM22M5C2H1R3CB01L 0.1pF(B) GQM2195C2E1R5BB12D GQM2195C2A1R5BB01D GQM22M5C2H1R5BB01L 0.25pF(C) GQM2195C2E1R5CB12D GQM2195C2A1R5CB01D GQM22M5C2H1R5CB01L 0.1pF(B) GQM2195C2E1R6BB12D GQM2195C2A1R6BB01D GQM22M5C2H1R6BB01L 0.25pF(C) GQM2195C2E1R6CB12D GQM2195C2A1R6CB01D GQM22M5C2H1R6CB01L 0.1pF(B) GQM2195C2E1R8BB12D GQM2195C2A1R8BB01D GQM22M5C2H1R8BB01L 0.25pF(C) GQM2195C2E1R8CB12D GQM2195C2A1R8CB01D GQM22M5C2H1R8CB01L 0.1pF(B) GQM2195C2E2R0BB12D GQM2195C2A2R0BB01D GQM22M5C2H2R0BB01L 0.25pF(C) GQM2195C2E2R0CB12D GQM2195C2A2R0CB01D GQM22M5C2H2R0CB01L 0.1pF(B) GQM2195C2E2R2BB12D GQM2195C2A2R2BB01D GQM22M5C2H2R2BB01L 0.25pF(C) GQM2195C2E2R2CB12D GQM2195C2A2R2CB01D GQM22M5C2H2R2CB01L 0.1pF(B) GQM2195C2E2R4BB12D GQM2195C2A2R4BB01D GQM22M5C2H2R4BB01L 0.25pF(C) GQM2195C2E2R4CB12D GQM2195C2A2R4CB01D GQM22M5C2H2R4CB01L 0.1pF(B) GQM2195C2E2R7BB12D GQM2195C2A2R7BB01D GQM22M5C2H2R7BB01L 0.25pF(C) GQM2195C2E2R7CB12D GQM2195C2A2R7CB01D GQM22M5C2H2R7CB01L 0.1pF(B) GQM2195C2E3R0BB12D GQM2195C2A3R0BB01D GQM22M5C2H3R0BB01L 0.25pF(C) GQM2195C2E3R0CB12D GQM2195C2A3R0CB01D GQM22M5C2H3R0CB01L 0.1pF(B) GQM2195C2E3R3BB12D GQM2195C2A3R3BB01D GQM22M5C2H3R3BB01L 0.25pF(C) GQM2195C2E3R3CB12D GQM2195C2A3R3CB01D GQM22M5C2H3R3CB01L 0.1pF(B) GQM2195C2E3R6BB12D GQM2195C2A3R6BB01D GQM22M5C2H3R6BB01L 0.25pF(C) GQM2195C2E3R6CB12D GQM2195C2A3R6CB01D GQM22M5C2H3R6CB01L 0.1pF(B) GQM2195C2E3R9BB12D GQM2195C2A3R9BB01D GQM22M5C2H3R9BB01L 0.25pF(C) GQM2195C2E3R9CB12D GQM2195C2A3R9CB01D GQM22M5C2H3R9CB01L 0.1pF(B) GQM2195C2E4R0BB12D GQM2195C2A4R0BB01D GQM22M5C2H4R0BB01L 0.25pF(C) GQM2195C2E4R0CB12D GQM2195C2A4R0CB01D GQM22M5C2H4R0CB01L 0.1pF(B) GQM2195C2E4R3BB12D GQM2195C2A4R3BB01D GQM22M5C2H4R3BB01L 0.25pF(C) GQM2195C2E4R3CB12D GQM2195C2A4R3CB01D GQM22M5C2H4R3CB01L 0.1pF(B) GQM2195C2E4R7BB12D GQM2195C2A4R7BB01D GQM22M5C2H4R7BB01L 0.25pF(C) GQM2195C2E4R7CB12D GQM2195C2A4R7CB01D GQM22M5C2H4R7CB01L 0.1pF(B) GQM2195C2E5R0BB12D GQM2195C2A5R0BB01D GQM22M5C2H5R0BB01L 0.25pF(C) GQM2195C2E5R0CB12D GQM2195C2A5R0CB01D GQM22M5C2H5R0CB01L 0.25pF(C) GQM2195C2E5R1CB12D GQM2195C2A5R1CB01D GQM22M5C2H5R1CB01L 0.5pF(D) GQM2195C2E5R1DB12D GQM2195C2A5R1DB01D GQM22M5C2H5R1DB01L 0.25pF(C) GQM2195C2E5R6CB12D GQM2195C2A5R6CB01D GQM22M5C2H5R6CB01L 0.5pF(D) GQM2195C2E5R6DB12D GQM2195C2A5R6DB01D GQM22M5C2H5R6DB01L 0.25pF(C) GQM2195C2E6R0CB12D GQM2195C2A6R0CB01D GQM22M5C2H6R0CB01L 0.5pF(D) GQM2195C2E6R0DB12D GQM2195C2A6R0DB01D GQM22M5C2H6R0DB01L The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series GQM2195C2AR50BB01D GQM2195C2ER50CB12D Low ESL LLp Series 1.1pF(1R1) GQM2195C2ER50BB12D High-Q GJM Series 1.0pF(1R0) 0.1pF(B) 0.25pF(C) High Frequency GQM Series 0.75pF(R75) 500(2H) Part Number Monolithic Microchip GMA Series 0.50pF(R50) Tolerance For Bonding GMD Series Capacitance 2.8x2.8(22)<1111> 100(2A) Product Information Rated Volt. [Vdc] For General GRM Series Temperature Compensating Type C0G(5C) Characteristics < >: EIA [inch] Code 105 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Temperature Compensating Type C0G(5C) Characteristics 2.0x1.25(21)<0805> LxW [mm] Capacitance GQM2195C2E6R2CB12D GQM2195C2A6R2CB01D GQM22M5C2H6R2CB01L GQM2195C2E6R2DB12D GQM2195C2A6R2DB01D GQM22M5C2H6R2DB01L 0.25pF(C) GQM2195C2E6R8CB12D GQM2195C2A6R8CB01D GQM22M5C2H6R8CB01L 0.5pF(D) GQM2195C2E6R8DB12D GQM2195C2A6R8DB01D GQM22M5C2H6R8DB01L 7.0pF(7R0) 0.25pF(C) GQM2195C2E7R0CB12D GQM2195C2A7R0CB01D GQM22M5C2H7R0CB01L 0.5pF(D) GQM2195C2E7R0DB12D GQM2195C2A7R0DB01D GQM22M5C2H7R0DB01L 7.5pF(7R5) 0.25pF(C) GQM2195C2E7R5CB12D GQM2195C2A7R5CB01D GQM22M5C2H7R5CB01L 0.5pF(D) GQM2195C2E7R5DB12D GQM2195C2A7R5DB01D GQM22M5C2H7R5DB01L 0.25pF(C) GQM2195C2E8R0CB12D GQM2195C2A8R0CB01D GQM22M5C2H8R0CB01L 0.5pF(D) GQM2195C2E8R0DB12D GQM2195C2A8R0DB01D GQM22M5C2H8R0DB01L 0.25pF(C) GQM2195C2E8R2CB12D GQM2195C2A8R2CB01D GQM22M5C2H8R2CB01L 0.5pF(D) GQM2195C2E8R2DB12D GQM2195C2A8R2DB01D GQM22M5C2H8R2DB01L 0.25pF(C) GQM2195C2E9R0CB12D GQM2195C2A9R0CB01D GQM22M5C2H9R0CB01L 0.5pF(D) GQM2195C2E9R0DB12D GQM2195C2A9R0DB01D GQM22M5C2H9R0DB01L 0.25pF(C) GQM2195C2E9R1CB12D GQM2195C2A9R1CB01D GQM22M5C2H9R1CB01L 0.5pF(D) GQM2195C2E9R1DB12D GQM2195C2A9R1DB01D GQM22M5C2H9R1DB01L 2%(G) GQM2195C2E100GB12D GQM2195C2A100GB01D GQM22M5C2H100GB01L 5%(J) GQM2195C2E100JB12D GQM2195C2A100JB01D GQM22M5C2H100JB01L 11pF(110) 2%(G) GQM2195C2E110GB12D GQM2195C2A110GB01D GQM22M5C2H110GB01L 5%(J) GQM2195C2E110JB12D GQM2195C2A110JB01D GQM22M5C2H110JB01L 12pF(120) 2%(G) GQM2195C2E120GB12D GQM2195C2A120GB01D GQM22M5C2H120GB01L 5%(J) GQM2195C2E120JB12D GQM2195C2A120JB01D GQM22M5C2H120JB01L 13pF(130) 2%(G) GQM2195C2E130GB12D GQM2195C2A130GB01D GQM22M5C2H130GB01L 5%(J) GQM2195C2E130JB12D GQM2195C2A130JB01D GQM22M5C2H130JB01L 15pF(150) 2%(G) GQM2195C2E150GB12D GQM2195C2A150GB01D GQM22M5C2H150GB01L 5%(J) GQM2195C2E150JB12D GQM2195C2A150JB01D GQM22M5C2H150JB01L 2%(G) GQM2195C2E160GB12D GQM2195C2A160GB01D GQM22M5C2H160GB01L 5%(J) GQM2195C2E160JB12D GQM2195C2A160JB01D GQM22M5C2H160JB01L 18pF(180) 2%(G) GQM2195C2E180GB12D GQM2195C2A180GB01D GQM22M5C2H180GB01L 5%(J) GQM2195C2E180JB12D GQM2195C2A180JB01D 20pF(200) 2%(G) GQM2195C2E200GB12D GQM2195C1H200GB01D GQM22M5C2H200GB01L 5%(J) GQM2195C2E200JB12D GQM2195C1H200JB01D GQM22M5C2H200JB01L 2%(G) GQM2195C2E220GB12D GQM2195C1H220GB01D GQM22M5C2H220GB01L 5%(J) GQM2195C2E220JB12D GQM2195C1H220JB01D GQM22M5C2H220JB01L 24pF(240) 2%(G) GQM2195C2E240GB12D GQM2195C1H240GB01D GQM22M5C2H240GB01L 5%(J) GQM2195C2E240JB12D GQM2195C1H240JB01D GQM22M5C2H240JB01L 27pF(270) 2%(G) GQM2195C2E270GB12D GQM2195C1H270GB01D GQM22M5C2H270GB01L 5%(J) GQM2195C2E270JB12D GQM2195C1H270JB01D GQM22M5C2H270JB01L 30pF(300) 2%(G) GQM2195C2E300GB12D GQM2195C1H300GB01D GQM22M5C2H300GB01L 5%(J) GQM2195C2E300JB12D GQM2195C1H300JB01D GQM22M5C2H300JB01L 33pF(330) 2%(G) GQM2195C2E330GB12D GQM2195C1H330GB01D GQM22M5C2H330GB01L 5%(J) GQM2195C2E330JB12D GQM2195C1H330JB01D GQM22M5C2H330JB01L 2%(G) GQM2195C2E360GB12D GQM2195C1H360GB01D GQM22M5C2H360GB01L 5%(J) GQM2195C2E360JB12D GQM2195C1H360JB01D GQM22M5C2H360JB01L 2%(G) GQM2195C2E390GB12D GQM2195C1H390GB01D GQM22M5C2H390GB01L 5%(J) GQM2195C2E390JB12D GQM2195C1H390JB01D GQM22M5C2H390JB01L Array GNM Series Low ESL LLp Series 8.2pF(8R2) 9.0pF(9R0) 9.1pF(9R1) High Frequency GQM Series High-Q GJM Series 10pF(100) 16pF(160) Monolithic Microchip GMA Series 500(2H) Part Number 0.5pF(D) 8.0pF(8R0) 22pF(220) For Bonding GMD Series 50(1H) 0.25pF(C) 6.8pF(6R8) 36pF(360) 39pF(390) The part number code is shown in ( ) and Unit is shown in [ ]. (Part Number) GQ M q w 21 9 5C 2E e r t y GQM22M5C2H180JB01L < >: EIA [inch] Code 6R2 C B12 D u i o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 106 2.8x2.8(22)<1111> 100(2A) Tolerance 6.2pF(6R2) Product Information 250(2E) Rated Volt. [Vdc] qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2.0x1.25(21)<0805> LxW [mm] 250(2E) 500(2H) Part Number 2%(G) GQM2195C2E430GB12D GQM2195C1H430GB01D 5%(J) GQM2195C2E430JB12D GQM2195C1H430JB01D GQM22M5C2H430JB01L 47pF(470) 2%(G) GQM2195C2E470GB12D GQM2195C1H470GB01D GQM22M5C2H470GB01L 5%(J) GQM2195C2E470JB12D GQM2195C1H470JB01D GQM22M5C2H470JB01L 51pF(510) 2%(G) GQM2195C2E510GB12D GQM2195C1H510GB01D GQM22M5C2H510GB01L 5%(J) GQM2195C2E510JB12D GQM2195C1H510JB01D GQM22M5C2H510JB01L 56pF(560) 2%(G) GQM2195C2E560GB12D GQM2195C1H560GB01D GQM22M5C2H560GB01L 5%(J) GQM2195C2E560JB12D GQM2195C1H560JB01D GQM22M5C2H560JB01L 62pF(620) 2%(G) GQM2195C2E620GB12D GQM2195C1H620GB01D GQM22M5C2H620GB01L 5%(J) GQM2195C2E620JB12D GQM2195C1H620JB01D GQM22M5C2H620JB01L 2%(G) GQM2195C2E680GB12D GQM2195C1H680GB01D GQM22M5C2H680GB01L 5%(J) GQM2195C2E680JB12D GQM2195C1H680JB01D GQM22M5C2H680JB01L 75pF(750) 2%(G) GQM2195C2E750GB12D GQM2195C1H750GB01D GQM22M5C2H750GB01L 5%(J) GQM2195C2E750JB12D GQM2195C1H750JB01D GQM22M5C2H750JB01L 82pF(820) 2%(G) GQM2195C2E820GB12D GQM2195C1H820GB01D GQM22M5C2H820GB01L 5%(J) GQM2195C2E820JB12D GQM2195C1H820JB01D GQM22M5C2H820JB01L 2%(G) GQM2195C2E910GB12D GQM2195C1H910GB01D GQM22M5C2H910GB01L 5%(J) GQM2195C2E910JB12D GQM2195C1H910JB01D GQM22M5C2H910JB01L 2%(G) GQM2195C2E101GB12D GQM2195C1H101GB01D GQM22M5C2H101GB01L 5%(J) GQM2195C2E101JB12D GQM2195C1H101JB01D GQM22M5C2H101JB01L 91pF(910) 100pF(101) The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series Low ESL LLp Series < >: EIA [inch] Code High Frequency GQM Series 68pF(680) GQM22M5C2H430GB01L Monolithic Microchip GMA Series 43pF(430) High-Q GJM Series Tolerance For Bonding GMD Series Capacitance 2.8x2.8(22)<1111> 50(1H) Product Information Rated Volt. [Vdc] For General GRM Series Temperature Compensating Type C0G(5C) Characteristics 107 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 Low ESL LLp Series Array GNM Series For General GRM Series GQM Series Specifications and Test Methods 1 Specifications Item No. Operating Temperature Test Method Y55 to 125D Reference Temperature: 25D 2 Rated Voltage See the previous page. The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimension Within the specified dimensions Using calipers No defects or abnormalities No failure should be observed when 300% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. GQM187, GQM219(250V), GQM22: 250% of the rated voltage 5 Dielectric Strength 6 Insulation Resistance More than 10,000M 7 Capacitance 8 The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25D and 75%RH max. and within 2 minutes of charging, provided the charge/discharge current is less than 50mA. Within the specified tolerance The capacitance/Q should be measured at 25D at the frequency and voltage shown in the table. 30pF and over: QU1400 30pF and below: QU800W20C Q High-Q GJM Series Capacitance Temperature Characteristics Capacitance Drift The capacitance change should be measured after 5 min. at each specified temp. stage. The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from steps 1 through 5 the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as in Table A. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in the steps 1, 3 and 5 by the capacitance value in step 3. Within the specified tolerance (Table A) Within T0.2% or T0.05pF (whichever is larger) Step 1 No removal of the terminations or other defect should occur. c Adhesive Strength of Termination a 10 b Monolithic Microchip GMA Series High Frequency GQM Series 9 0.5 to 5Vrms Voltage C: Nominal Capacitance (pF) Temperature Coefficient 1T0.1MHz Frequency Solder resist For Bonding GMD Series Baked electrode or copper foil Temperature (D) Reference Temp. T2 2 Y55T3 3 Reference Temp. T2 4 125T3 5 Reference Temp. T2 Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 1 using a eutectic solder. Then apply 10N* force in parallel with the test jig for 10T1 sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *5N (GQM188) Type GQM18 GQM21 GQM22 a 1.0 1.2 2.2 b 3.0 4.0 5.0 c 1.2 1.65 2.9 (in mm) Fig. 1 11 Appearance No defects or abnormalities Capacitance Within the specified tolerance Vibration Resistance Product Information Q 30pF and over: QU1400 30pF and below: QU800W20C C: Nominal Capacitance (pF) Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). Continued on the following page. 108 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 Continued from the preceding page. Specifications Within T5% or T0.5pF (whichever is larger) 4.5 VWZ[(c)XT_\|U(R)]YZSTWQ,RV^[ Y]^(R)Z b c 12 Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 2 using a eutectic solder. Then apply a force in the direction shown in Fig. 3. The soldering should be done by the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 20 a Deflection 100 Array GNM Series No defects or abnormalities. Capacitance Change 50 Pressurizing speed: 1.0mm/sec. Pressurize R230 t: 1.6mm Type GQM18 GQM21 GQM22 a 1.0 1.2 2.2 b 3.0 4.0 5.0 Flexure : V1 c 1.2 1.65 2.9 Capacitance meter 45 45 (in mm) Fig. 3 Fig. 2 13 Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120D for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 2T0.5 seconds at 230T5D or Sn-3.0Ag-0.5Cu solder solution for 2T0.5 seconds at 245T5C. The measured and observed characteristics should satisfy the specifications in the following table. Resistance 14 to Soldering Heat Appearance No defects or abnormalities. Capacitance Change Within T2.5% or T0.25 pF (whichever is larger) Q 30pF and over: QU1400 30pF and below: QU800W20C Preheat the capacitor at 120 to 150D for 1 minute. Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution at 270T5D for 10T0.5 seconds. Let sit at room temperature for 24T2 hours, then measure. Low ESL LLp Series Appearance Test Method High-Q GJM Series Item 40 No. For General GRM Series GQM Series Specifications and TestGQM Methods Series Specifications and Test Methods Dielectric Strength No defects. The measured and observed characteristics should satisfy the specifications in the following table. 15 Appearance No defects or abnormalities. Capacitance Change Within T2.5% or T0.25pF (whichever is larger) Temperature Cycle 30pF and over: QU1400 30pF and below: QU800W20C Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 24T2 hours at room temperature, then measure. C: Nominal Capacitance (pF) 1 2 3 4 Min. Operating Room Max. Operating Room Temp. (D) Temp. W0/Y3 Temp. Temp. W3/Y0 Temp. I.R. More than 10,000M Time (min.) Dielectric Strength No defects. Q Step 30T3 2 to 3 30T3 2 to 3 Monolithic Microchip GMA Series More than 10,000M High Frequency GQM Series C: Nominal Capacitance (pF) I.R. No defects or abnormalities. Capacitance Change Within T5% or T0.5pF (whichever is larger) Q 30pF and over: QU350 10pF and over, 30pF and below: QU275+5C/2 10pF and below: QU200W10C Set the capacitor at 40T2D and in 90 to 95% humidity for 500T12 hours. Remove and set for 24T2 hours at room temperature, then measure. C: Nominal Capacitance (pF) I.R. More than 1,000M Continued on the following page. 109 Product Information 16 Humidity Steady State Appearance For Bonding GMD Series The measured and observed characteristics should satisfy the specifications in the following table. PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 Array GNM Series For General GRM Series GQM Series Specifications and Test Methods Continued from the preceding page. No. Specifications Item Test Method The measured and observed characteristics should satisfy the specifications in the following table. 17 Humidity Load Appearance No defects or abnormalities. Capacitance Change Within T7.5% or T0.75pF (whichever is larger) Q Apply the rated voltage at 40T2D and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours at room temperature then measure. The charge/discharge current is less than 50mA. 30pF and over: QU200 30pF and below: QU100W10C/3 C: Nominal Capacitance (pF) I.R. More than 500M Low ESL LLp Series The measured and observed characteristics should satisfy the specifications in the following table. 18 High Temperature Load Appearance No defects or abnormalities. Capacitance Change Within T3% or T0.3pF (whichever is larger) Q 30pF and over: QU350 10pF and over, 30pF and below: QU275W5C/2 10pF and below: QU200W10C I.R. More than 1,000M Apply 200%* of the rated voltage for 1000T12 hours at the maximum operating temperature T3D. Set for 24T2 hours at room temperature, then measure. The charge/discharge current is less than 50mA. *GQM22: 150% of the rated voltage High-Q GJM Series C: Nominal Capacitance (pF) Table A Capacitance Change from 25D (%) Char. Nominal Values (ppm/D) *1 Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series Max. Min. 0T30 Y0.24 0.58 5C *1: Nominal values denote the temperature coefficient within a range of 25 to 125D. 110 Y30D Y55D Max. 0.40 Y10D Min. Y0.17 Max. 0.25 Min. Y0.11 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Data Q - Frequency Characteristics For General GRM Series GQM Series Data Resonant Frequency - Capacitance GQM18 10000 2.4pF 1pF 100 10 GQM21 1 GQM18 10 0 0.1 1G 10G 1 10 100 Capacitance (pF) Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Frequency (Hz) For Bonding GMD Series 1 100M Product Information Q 1000 Array GNM Series 6.8pF Resonant Frequency (GHz) 100 111 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Chip Monolithic Ceramic Capacitors Monolithic Microchip GMA Series L W Array GNM Series Features T 1. Better microwave characteristics 2. Suitable for by passing 3. High density mounting Outer electrode: Au plated Applications Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series 1. Optical device for telecommunication 2. IC, built-in IC packaging 3. Measuring equipment 112 Part Number GMA0D3 GMA05X GMA085 L 0.38 0.05 0.5 0.05 0.8 0.05 Dimensions (mm) W 0.38 0.05 0.5 0.05 0.8 0.05 T 0.3 0.05 0.35 0.05 0.5 0.1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics X ex.X: T Dimension [mm] LxW 0.38x0.38 (0D) [mm] <015015> X 330pF(331) X 470pF(471) X 680pF(681) X 1000pF(102) X 1500pF(152) X 5 2200pF(222) X 5 3300pF(332) X 5 4700pF(472) X 6800pF(682) 10000pF(103) 25 (1E) 5 X 5 15000pF(153) X 5 22000pF(223) X 5 33000pF(333) 5 47000pF(473) 5 68000pF(683) 5 0.10F(104) X 0.47F(474) The part number code is shown in ( ) and Unit is shown in [ ]. 6.3 (0J) 5 X 3 10 (1A) Array GNM Series 220pF(221) 100 (2A) Low ESL LLp Series X 6.3 (0J) High-Q GJM Series X 150pF(151) 10 (1A) 5 5 < >: EIA [inch] Code High Frequency GQM Series 100pF(101) 25 (1E) Monolithic Microchip GMA Series 100 (2A) For Bonding GMD Series 10 (1A) 0.8x0.8 (08) <0303> Product Information Rated Voltage [Vdc] Capacitance 0.5x0.5 (05) <0202> 113 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics 0.38x0.38(0D)<015015> LxW [mm] 10(1A) Rated Volt. [Vdc] Capacitance Tolerance Part Number 20%(M) 10000pF(103) GMA0D3R71A103MA01T 0.5x0.5(05)<0202> High-Q GJM Series High Frequency GQM Series Monolithic Microchip GMA Series For Bonding GMD Series Product Information 100(2A) Rated Volt. [Vdc] Capacitance Low ESL LLp Series Array GNM Series LxW [mm] 25(1E) Tolerance 10(1A) 6.3(0J) Part Number 100pF(101) 20%(M) GMA05XR72A101MA01T 150pF(151) 20%(M) GMA05XR72A151MA01T 220pF(221) 20%(M) GMA05XR72A221MA01T 330pF(331) 20%(M) GMA05XR72A331MA01T 470pF(471) 20%(M) GMA05XR72A471MA01T 680pF(681) 20%(M) GMA05XR72A681MA01T 1000pF(102) 20%(M) GMA05XR72A102MA01T 1500pF(152) 20%(M) GMA05XR71E152MA11T 2200pF(222) 20%(M) GMA05XR71E222MA11T 3300pF(332) 20%(M) GMA05XR71E332MA11T 4700pF(472) 20%(M) GMA05XR71E472MA11T 6800pF(682) 20%(M) GMA05XR71A682MA01T 10000pF(103) 20%(M) GMA05XR71A103MA01T 15000pF(153) 20%(M) GMA05XR71A153MA01T 22000pF(223) 20%(M) GMA05XR71A223MA01T 33000pF(333) 20%(M) 47000pF(473) 20%(M) 68000pF(683) 20%(M) 0.10F(104) 20%(M) GMA05XR60J104ME12T* 0.8x0.8(08)<0303> LxW [mm] 100(2A) Rated Volt. [Vdc] Capacitance 25(1E) Tolerance 10(1A) 6.3(0J) Part Number 1500pF(152) 20%(M) GMA085R72A152MA01T 2200pF(222) 20%(M) GMA085R72A222MA01T 3300pF(332) 20%(M) GMA085R72A332MA01T 4700pF(472) 20%(M) GMA085R72A472MA01T 6800pF(682) 20%(M) GMA085R72A682MA01T 10000pF(103) 20%(M) GMA085R71E103MA11T 15000pF(153) 20%(M) GMA085R71E153MA11T 22000pF(223) 20%(M) GMA085R71E223MA11T 33000pF(333) 20%(M) GMA085R71A333MA01T 47000pF(473) 20%(M) GMA085R71A473MA01T 68000pF(683) 20%(M) GMA085R71A683MA01T 0.10F(104) 20%(M) GMA085R71A104MA01T 0.47F(474) 20%(M) GMA085R60J474ME12T* The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GMA series Specifications and Test Method (2). (Part Number) GM A 0D 3 R7 1A q w e r t y 103 M u i Packaging Code in Part Number shows STD Tray. 114 A01 T o !0 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 R7: -55 to +125C Reference Temperature: 25C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities Visual inspection 4 Dimensions Within the specified dimensions Using calipers 5 Dielectric Strength No defects or abnormalities No failure should be observed when a voltage of 250% of the rated voltage is applied between the both terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 10,000M or 500F (whichever is smaller) The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at normal temperature and humidity and within 2 minutes of charging. 7 Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) R7: W.V.: 25V min.; 0.025 max. W.V.: 16V/10V; 0.035 max. The capacitance/D.F. should be measured at reference temperature at the frequency and voltage shown in the table. 10.1kHz 10.2Vrms 9 Capacitance Temperature No bias Characteristics R7: Within +/-15% (-55 to +125C) Step 1 2 3 4 High-Q GJM Series The capacitance change should be measured after 5 min. at each specified temp. stage. *The ranges of capacitance change compared with the Reference Temperature value over the temperature ranges shown in the table should be within the specified ranges.* Temperature (C) 252 -553 252 1253 *Initial measurement for high dielectric constant type Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. 10 Bond Pull force: 0.03N min. Strength MIL-STD-883 Method 2011 Condition D Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20) and bond a 25m (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. Then, pull wire. Die Shear Die Shear force: 2N min. Strength MIL-STD-883 Method 2019 Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20). Apply the force parallel to the substrate. Mechanical Strength Appearance No defects or abnormalities Vibration Capacitance Within the specified tolerance 11 Resistance R7: W.V.: 25V min.; 0.025 max. D.F. W.V.: 16V/10V; 0.035 max. Appearance No defects or abnormalities Capacitance R7: Within 7.5% Change 12 Temperature D.F. Cycle R7: W.V.: 25V min.; 0.025 max. W.V.: 16V/10V; 0.035 max. I.R. More than 10,000M or 500F (whichever is smaller) Dielectric Strength No defects Ramp frequency from 10 to 55Hz then return to 10Hz all within 1 minute. Amplitude: 1.5 mm (0.06 inch) max. total excursion. Apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). The capacitor should be set for 242 hours at room temperature after one hour of heat treatment at 150+0/-10C, then measure for the initial measurement. Fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. Set it for 242 hours at room temperature, then measure. 4 1 2 3 Min. Operating Room Max. Operating Room Temp. (C) Temp. +0/-3 Temp. Temp. +3/-0 Temp. Time (min.) 303 303 2 to 3 2 to 3 Step Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No. 11 to 15 are performed. Continued on the following page. 115 High Frequency GQM Series Frequency Voltage Array GNM Series Test Method Monolithic Microchip GMA Series Operating Temperature Range Specifications For Bonding GMD Series 1 Item Product Information No. Low ESL LLp Series When no "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2). For General GRM Series GMA Series Specifications and Test Methods (1) GMA Series Specifications and Test Methods (1) PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 For General GRM Series GMA Series Specifications and Test Methods (1) Continued from the preceding page. No. Item When no "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2). Specifications Test Method Appearance No defects or abnormalities Array GNM Series Capacitance R7: Within 12.5% Change Humidity 13 (Steady State) D.F. R7: W.V.: 10V min.; 0.05 max. I.R. More than 1,000M or 50F (whichever is smaller) Appearance No defects or abnormalities Capacitance R7: Within 12.5% Humidity Change 14 Load D.F. R7: W.V.: 10V min.; 0.05 max. I.R. Low ESL LLp Series Set the capacitor for 50012 hours at 402C, in 90 to 95% humidity. Take it out and set it for 242 hours at room temperature, then measure. Apply the rated voltage for 50012 hours at 402C, in 90 to 95% humidity and set it for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. More than 500M or 25F (whichever is smaller) Appearance No defects or abnormalities A voltage treatment should be given to the capacitor, in which a DC voltage of 200% the rated voltage is applied for one hour at the maximum operating temperature; 3C then it should be set for 242 hours at room temperature and the initial measurement should be conducted. Then apply the above mentioned voltage continuously for 100012 hours at the same temperature, remove it from the bath, and set it for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. Capacitance R7: Within 12.5% Change High R7: W.V.: 10V min.; 0.05 max. 15 Temperature D.F. Load I.R. More than 1,000M or 50F (whichever is smaller) High-Q GJM Series Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No. 11 to 15 are performed. Capacitor Gold wire Die bond Gold land Alumina substrate Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series Alumina substrate 116 Gold land PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 1 Item Operating Temperature Range Specifications Test Method R6 : -55C to 85C Reference Temperature : 25C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities. Visual inspection. 4 Dimensions Within the specified dimensions. Using calipers. 5 Dielectric Strength No defects or abnormalities. No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 50 * F The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at normal temperature and humidity and within 1 minutes of charging. 7 Capacitance Within the specified tolerance. 8 Dissipation Factor (D.F.) R6 : 0.1 max. The capacitance/D.F. should be measured at reference temperature at the frequency and voltage shown in the table. Capacitance CV10F (6.3Vmax.) Frequency 10.1kHz Array GNM Series No. Low ESL LLp Series When no "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2). For General GRM Series GMA Series Specifications and Test Methods (2) GMA Series Specifications and Test Methods (2) Voltage 0.50.1Vrms No bias R6 : Within 15% (-55C to +85C) Step 1 2 3 4 Temperature (C) 252 -553 252 853 *Initial measurement for high dielectric constant type Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. 10 Bond Pull force : 0.03N min. Strength MIL-STD-883 Method 2011 Condition D Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20) and bond a 25m (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. Then, pull wire. Die Shear Die Shear force : 2N min. Strength MIL-STD-883 Method 2019 Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20). Apply the force parallel to the substrate. Mechanical Strength Appearance No defects or abnormalities. Vibration 11 Resistance Capacitance Within the specified tolerance. D.F. R6 : 0.1 max. Appearance No defects or abnormalities. Capacitance R6 : Within 7.5% Change D.F. Temperature I.R. 12 Sudden Change Dielectric Strength R6 : 0.1 max. More than 50 * F Ramp frequency from 10 to 55Hz then return to 10Hz all within 1 minute. Amplitude: 1.5 mm (0.06 inch) max. total excursion. Apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). The capacitor should be set for 242 hours at room temperature after one hour of heat treatment at 150+0/-10C, then measure for the initial measurement. Fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. Set it for 484 hours at room temperature, then measure. Step No defects 1 Min. Temp. (C) Operating Temp.+0/-3 Time (min.) 303 2 Room Temp. 2 to 3 3 Max. Operating Temp. +3/-0 303 Monolithic Microchip GMA Series Capacitance Temperature Characteristics 4 Room Temp. 2 to 3 Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No. 11 to 14 are performed. Continued on the following page. 117 Product Information 9 For Bonding GMD Series The ranges of capacitance change compared with the Reference Temperature value over the temperature ranges shown in the table should be within the specified ranges.* High Frequency GQM Series High-Q GJM Series The capacitance change should be measured after 5 min. at each specified temp. stage. PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 For General GRM Series GMA Series Specifications and Test Methods (2) Continued from the preceding page. No. Item When no "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2). Specifications Test Method Appearance No defects or abnormalities. Apply the rated voltage for 50012 hours at 402C, in 90 to 95% humidity and set it for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. Array GNM Series Capacitance R6 : Within 12.5% Change High Temperature 13 High Humidity (Steady) D.F. R6 : 0.2 max. * Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. I.R. More than 12.5 * F * Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Low ESL LLp Series Appearance No defects or abnormalities. Apply 150% of the rated voltage for 100012 hours at the maximum operating temperature 3C. Let sit for 242 hours at room temperature, then measure. The charge/ discharge current is less than 50mA. Capacitance R6 : Within 12.5% Change D.F. R6 : 0.2 max. * Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. 14 Durability I.R. More than 25 * F High-Q GJM Series * Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No. 11 to 14 are performed. Capacitor Gold wire Die bond Gold land High Frequency GQM Series Alumina substrate Product Information For Bonding GMD Series Monolithic Microchip GMA Series Alumina substrate 118 Gold land PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Chip Monolithic Ceramic Capacitors for Bonding GMD Series Features e 1. Small chip size (LxWxT: 0.6x0.3x0.3, 1.0x0.5x0.5mm) 2. Available for Wire/Die bonding due to Gold termination. 3. Suitable for Optical device for telecommunication, built-in IC packaging. T Array GNM Series Outer electrode: Au High-Q GJM Series Dimensions (mm) W T e g min. 0.30.03 0.30.03 0.12 to 0.22 0.16 0.50.05 0.50.05 0.15 to 0.35 0.3 High Frequency GQM Series GMD033 GMD155 L 0.60.03 1.00.05 Monolithic Microchip GMA Series Part Number W Low ESL LLp Series L For Bonding GMD Series 1. Optical device for telecommunication 2. IC, built-in IC packaging e Product Information Applications g 119 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Capacitance Table High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics 3 ex.3: T Dimension [mm] 0.6x0.3 (03) <0201> 0.6x0.3 (03) <0201> 1.0x0.5 (15) <0402> 16 (1C) 6.3 (0J) 10 (1A) 56000pF(563) 5 3 68000pF(683) 5 3 82000pF(823) 5 3 0.10F(104) 5 3 LxW [mm] Rated Voltage [Vdc] 25 (1E) 100pF(101) 3 120pF(121) 3 150pF(151) 3 180pF(181) 3 220pF(221) 3 5 270pF(271) 3 5 330pF(331) 3 5 390pF(391) 3 5 470pF(471) 3 5 560pF(561) 3 5 680pF(681) 3 5 820pF(821) 3 5 1000pF(102) 3 5 1200pF(122) 3 5 1500pF(152) 3 Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series Capacitance 16 (1C) 1.0x0.5 (15) <0402> 10 (1A) 50 (1H) 5 1800pF(182) 3 5 2200pF(222) 3 5 2700pF(272) 3 5 3300pF(332) 3 5 3900pF(392) 3 5 4700pF(472) 3 5 5600pF(562) 3 5 6800pF(682) 3 5 8200pF(822) 3 5 10000pF(103) 3 5 12000pF(123) 5 15000pF(153) 5 18000pF(183) 5 22000pF(223) 5 27000pF(273) 5 33000pF(333) 5 39000pF(393) 5 47000pF(473) 5 0.12F(124) 5 0.15F(154) 5 0.18F(184) 5 0.22F(224) 5 0.27F(274) 5 0.33F(334) 5 0.39F(394) 5 0.47F(474) The part number code is shown in ( ) and Unit is shown in [ ]. 120 25 (1E) 5 < >: EIA [inch] Code PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series High Dielectric Constant Type X7R(R7) Characteristics 0.6x0.3(03)<0201> LxW [mm] 25(1E) Rated Volt. [Vdc] 16(1C) Tolerance 10(1A) Part Number 10%(K) GMD033R71E101KA01D 120pF(121) 10%(K) GMD033R71E121KA01D 150pF(151) 10%(K) GMD033R71E151KA01D 180pF(181) 10%(K) GMD033R71E181KA01D 220pF(221) 10%(K) GMD033R71E221KA01D 270pF(271) 10%(K) GMD033R71E271KA01D 330pF(331) 10%(K) GMD033R71E331KA01D 390pF(391) 10%(K) GMD033R71E391KA01D 470pF(471) 10%(K) GMD033R71E471KA01D 560pF(561) 10%(K) GMD033R71E561KA01D 680pF(681) 10%(K) GMD033R71E681KA01D 820pF(821) 10%(K) GMD033R71E821KA01D 1000pF(102) 10%(K) GMD033R71E102KA01D 1200pF(122) 10%(K) GMD033R71E122KA01D 1500pF(152) 10%(K) GMD033R71E152KA01D 1800pF(182) 10%(K) GMD033R71C182KA11D 2200pF(222) 10%(K) GMD033R71C222KA11D 2700pF(272) 10%(K) GMD033R71C272KA11D 3300pF(332) 10%(K) GMD033R71C332KA11D 3900pF(392) 10%(K) GMD033R71A392KA01D 4700pF(472) 10%(K) GMD033R71A472KA01D 5600pF(562) 10%(K) GMD033R71A562KA01D 6800pF(682) 10%(K) GMD033R71A682KA01D 8200pF(822) 10%(K) GMD033R71A822KA01D 10000pF(103) 10%(K) GMD033R71A103KA01D Low ESL LLp Series High-Q GJM Series < >: EIA [inch] Code (Part Number) GM D 03 3 R7 1E q w e r t y 101 K u i A01 D o !0 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging Packaging Code in Part Number shows STD 180mm Reel Taping. 121 Product Information For Bonding GMD Series Monolithic Microchip GMA Series The part number code is shown in ( ) and Unit is shown in [ ]. Array GNM Series 100pF(101) High Frequency GQM Series Capacitance PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General GRM Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High Dielectric Constant Type X7R(R7) Characteristics 1.0x0.5(15)<0402> LxW [mm] Capacitance 16(1C) Part Number 10%(K) GMD155R71H221KA01D 270pF(271) 10%(K) GMD155R71H271KA01D 330pF(331) 10%(K) GMD155R71H331KA01D 390pF(391) 10%(K) GMD155R71H391KA01D 470pF(471) 10%(K) GMD155R71H471KA01D 560pF(561) 10%(K) GMD155R71H561KA01D 680pF(681) 10%(K) GMD155R71H681KA01D 820pF(821) 10%(K) GMD155R71H821KA01D 1000pF(102) 10%(K) GMD155R71H102KA01D 1200pF(122) 10%(K) GMD155R71H122KA01D 1500pF(152) 10%(K) GMD155R71H152KA01D 1800pF(182) 10%(K) GMD155R71H182KA01D 2200pF(222) 10%(K) GMD155R71H222KA01D 2700pF(272) 10%(K) GMD155R71H272KA01D 3300pF(332) 10%(K) GMD155R71H332KA01D 3900pF(392) 10%(K) GMD155R71H392KA01D 4700pF(472) 10%(K) GMD155R71H472KA01D 5600pF(562) 10%(K) GMD155R71E562KA01D 6800pF(682) 10%(K) GMD155R71E682KA01D 8200pF(822) 10%(K) GMD155R71E822KA01D 10000pF(103) 10%(K) GMD155R71E103KA01D 12000pF(123) 10%(K) GMD155R71E123KA01D 15000pF(153) 10%(K) GMD155R71E153KA01D 18000pF(183) 10%(K) GMD155R71E183KA01D 22000pF(223) 10%(K) GMD155R71E223KA01D 27000pF(273) 10%(K) GMD155R71E273KA11D 33000pF(333) 10%(K) GMD155R71E333KA11D 39000pF(393) 10%(K) GMD155R71E393KA11D 47000pF(473) 10%(K) GMD155R71E473KA11D 56000pF(563) 10%(K) GMD155R71C563KA11D 68000pF(683) 10%(K) GMD155R71C683KA11D 82000pF(823) 10%(K) GMD155R71C823KA11D 0.10F(104) 10%(K) Array GNM Series 220pF(221) Low ESL LLp Series High-Q GJM Series High Frequency GQM Series 25(1E) Tolerance GMD155R71C104KA11D The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Product Information For Bonding GMD Series Monolithic Microchip GMA Series 50(1H) Rated Volt. [Vdc] (Part Number) GM D 15 5 R7 1H q w e r t y 221 K u i A01 D o !0 Packaging Code in Part Number shows STD 180mm Reel Taping. 122 qProduct ID wSeries tTemperature Characteristics iCapacitance Tolerance eDimensions (LxW) yRated Voltage oIndividual Specification Code rDimension (T) uCapacitance !0Packaging PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Tolerance 0.6x0.3(03)<0201> 1.0x0.5(15)<0402> 6.3(0J) 10(1A) Part Number 56000pF(563) 10%(K) GMD033R60J563KE11D* 68000pF(683) 10%(K) GMD033R60J683KE11D* 82000pF(823) 10%(K) GMD033R60J823KE11D* 0.10F(104) 10%(K) GMD033R60J104KE11D* 0.12F(124) 10%(K) GMD155R61A124KE12D* 0.15F(154) 10%(K) GMD155R61A154KE12D* 0.18F(184) 10%(K) GMD155R61A184KE12D* 0.22F(224) 10%(K) GMD155R61A224KE12D* 0.27F(274) 10%(K) GMD155R61A274KE11D* 0.33F(334) 10%(K) GMD155R61A334KE11D* 0.39F(394) 10%(K) GMD155R61A394KE11D* 0.47F(474) 10%(K) GMD155R61A474KE11D* Array GNM Series Rated Volt. [Vdc] Low ESL LLp Series LxW [mm] For General GRM Series High Dielectric Constant Type X5R(R6) Characteristics Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series The part number code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code * Please refer to GMD series Specifications and Test Method (2). 123 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 For General GRM Series GMD Series Specifications and Test Methods (1) When no "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2). No. Low ESL LLp Series Array GNM Series 1 Item Operating Temperature Range Specifications Test Method R7 : -55C to 125C Reference Temperature : 25C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities. Visual inspection. 4 Dimensions Within the specified dimensions. Using calipers. 5 Dielectric Strength No defects or abnormality. No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 10,000M or 500 * F (whichever is smaller) The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at normal temperature and humidity and within 2 minutes of charging. 7 Capacitance Within the specified tolerance. 8 Dissipation Factor (D.F.) R7 : W.V. 25Vmin. : 0.025 max. W.V. 16/10V : 0.035 max. The capacitance/D.F. should be measured at reference temperature at the frequency and voltage shown in the table. Frequency Voltage 10.1kHz 10.2Vrms High-Q GJM Series The capacitance change should be measured after 5 min. at each specified temp. stage. The ranges of capacitance change compared with the Reference Temperature value over the temperature ranges shown in the table should be within the specified ranges.* Capacitance Temperature Characteristics High Frequency GQM Series 9 R7 : Within 15% (-55C to +125C) For Bonding GMD Series Temperature (C) 252 -553 252 1253 Bond Pull force : 0.03N min. Strength MIL-STD-883 Method 2011 Condition D Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20) and bond a 25mm (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. Then, pull wire. Die Shear Die Shear force : 2N min. Strength MIL-STD-883 Method 2019 Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20). Apply the force parallel to the substrate. Mechanical Strength Appearance No defects or abnormalities. Vibration 11 Resistance Capacitance Within the specified tolerance. D.F. R7 : W.V. 25Vmin. : 0.025 max. W.V. 16/10V : 0.035 max. Appearance No defects or abnormalities. Product Information Step 1 2 3 4 *Initial measurement for high dielectric constant type Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. 10 Monolithic Microchip GMA Series No bias Capacitance R7 : Within 7.5% Change 12 Temperature Cycle D.F. R7 : W.V. 25Vmin. : 0.025 max. W.V. 16/10V : 0.035 max. I.R. More than 10,000M or 500 * F (whichever is smaller) Dielectric Strength No defects Ramp frequency from 10 to 55Hz then return to 10Hz all within 1 minute. Amplitude: 1.5 mm (0.06 inch) max. total excursion. Apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). The capacitor should be set for 242 hours at room temperature after one hour of heat treatment at 150+0/-10C, then measure for the initial measurement. Fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. Set it for 242 hours at room temperature, then measure. Step 1 Min. Temp. (C) Operating Temp.+0/-3 Time (min.) 30+/-3 2 Room Temp. 2 to 3 3 Max. Operating Temp. +3/-0 30+/-3 4 Room Temp. 2 to 3 Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding. when tests No. 11 to 15 are performed. Continued on the following page. 124 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 Specifications Test Method Appearance No defects or abnormalities. Capacitance R7 : Within 12.5% Change 13 Humidity (Steady State) D.F. I.R. Set the capacitor for 50012 hours at 402C, in 90 to 95% humidity. Take it out and set it for 242 hours at room temperature, then measure. R7 : W.V. 25Vmin. : 0.05 max. W.V. 16/10V : 0.05 max. More than 1,000M or 50 * F (whichever is smaller) Appearance No defects or abnormalities. Capacitance R7 : Within 12.5% Change 14 Humidity Load D.F. I.R. Apply the rated voltage for 50012 hours at 402C, in 90 to 95% humidity and set it for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. R7 : W.V. 25Vmin. : 0.05 max. W.V. 16/10V : 0.05 max. More than 500M or 25 * F (whichever is smaller) Appearance No defects or abnormalities. A voltage treatment should be given to the capacitor, in which a DC voltage of 200% the rated voltage is applied for one hour at the maximum operating temperature; 3C then it should be set for 242 hours at room temperature and the initial measurement should be conducted. Then apply the above-mentioned voltage continuously for 100012 hours at the same temperature, remove it from the bath, and set it for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. Capacitance R7 : Within 12.5% Change High 15 Temperature D.F. Load I.R. R7 : W.V. 25Vmin. : 0.05 max. W.V. 16/10V : 0.05 max. More than 1,000M or 50 * F (whichever is smaller) Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding. when tests No. 11 to 15 are performed. Die bond Gold wire High Frequency GQM Series Gold wire Capacitor Alumina substrate Gold land For Bonding GMD Series Monolithic Microchip GMA Series Gold land Product Information Alumina substrate Array GNM Series Item Low ESL LLp Series No. When no "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2). High-Q GJM Series Continued from the preceding page. For General GRM Series GMD Series Specifications and Test Methods (1) GMD Series Specifications and Test Methods (1) 125 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 For General GRM Series GMD Series Specifications and Test Methods (2) When no "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2). No. Low ESL LLp Series Array GNM Series 1 Item Operating Temperature Range Specifications Test Method R6 : -55C to 85C Reference Temperature : 25C 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage that may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. 3 Appearance No defects or abnormalities. Visual inspection. 4 Dimensions Within the specified dimensions. Using calipers. 5 Dielectric Strength No defects or abnormalities. No failure should be observed when 250% of the rated voltage is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. 6 Insulation Resistance More than 50 * F The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at normal temperature and humidity and within 1 minutes of charging. 7 Capacitance Within the specified tolerance. 8 Dissipation Factor (D.F.) R6 : 0.1 max. The capacitance/D.F. should be measured at reference temperature at the frequency and voltage shown in the table. Capacitance CV10F (10Vmin.)*1 CV10F (6.3Vmax.) Frequency 10.1kHz 10.1kHz Voltage 1.00.2Vrms 0.50.1Vrms *1 GMD155 R6 1A 124 to 224 are applied to 0.50.1 Vrms. High-Q GJM Series The capacitance change should be measured after 5 min. at each specified temp. stage. The ranges of capacitance change compared with the Reference Temperature value over the temperature ranges shown in the table should be within the specified ranges.* Capacitance Temperature Characteristics No bias R6 : Within 15% (-55C to +85C) Monolithic Microchip GMA Series High Frequency GQM Series 9 For Bonding GMD Series Temperature (C) 252 -553 252 853 *Initial measurement for high dielectric constant type Perform a heat treatment at 150 +0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. 10 Bond Pull force : 0.03N min. Strength MIL-STD-883 Method 2011 Condition D Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20) and bond a 25m (0.001 inch) gold wire to the capacitor terminal using an ultrasonic ball bond. Then, pull wire. Die Shear Die Shear force : 2N min. Strength MIL-STD-883 Method 2019 Mount the capacitor on a gold metallized alumina substrate with Au-Sn (80/20). Apply the force parallel to the substrate. Mechanical Strength Appearance No defects or abnormalities. Vibration 11 Resistance Capacitance Within the specified tolerance. D.F. Product Information Step 1 2 3 4 R6 : 0.1 max. Appearance No defects or abnormalities. Capacitance R6 : Within 7.5% Change D.F. Temperature I.R. 12 Sudden Change Dielectric Strength R6 : 0.1 max. More than 50 * F Ramp frequency from 10 to 55Hz then return to 10Hz all within 1 minute. Amplitude: 1.5 mm (0.06 inch) max. total excursion. Apply this motion for a period of 2 hours in each of 3 mutually perpendicular directions (total 6 hours). The capacitor should be set for 242 hours at room temperature after one hour of heat treatment at 150+0/-10C, then measure for the initial measurement. Fix the capacitor to the supporting jig in the same manner and under the same conditions as (11) and conduct the five cycles according to the temperatures and time shown in the following table. Set it for 242 hours at room temperature, then measure. Step No defects 1 Min. Temp. (C) Operating Temp.+0/-3 Time (min.) 303 2 Room Temp. 2 to 3 3 Max. Operating Temp. +3/-0 303 4 Room Temp. 2 to 3 Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding. when tests No. 11 to 14 are performed. Continued on the following page. 126 PDF catalog downloaded from the of is Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking products in it may discontinued without advance Please check withadvance our ThisisSpecifications and!CAUTION Testwebsite Methods downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's areand/or subject to be change in it may notice. be discontinued without notice. *1.Please read rating and (for storage, operating, rating, soldering, mounting and handling) this catalog to specifications prevent burning, etc.or our products !Note * This !Note C02E.pdf sales representatives or product engineers before ordering. Please check our salesspecifications representatives or product before ordering. *0.This catalog haswith only typical because thereengineers is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog only typical and specifications because theretypical is no space for detailed specifications. our product specifications or transact approval sheet for product specifications before ordering. 2. Thishas Specifications Test Methods has only specifications because there is noTherefore, space for please detailedapprove specifications. Therefore, please approve ourthe product specifications or transact the approval sheet for product 0. specifications before ordering. 10.12.20 Continued from the preceding page. Item Specifications Test Method Appearance No defects or abnormalities. Apply the rated voltage for 50012 hours at 402C, in 90 to 95% humidity and set it for 242 hours at room temperature, then measure. The charge/discharge current is less than 50mA. Capacitance R6 : Within 12.5% Change R6 : 0.2 max. * Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. I.R. More than 12.5 * F * Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Apply 150%*2 of the rated voltage for 100012 hours at the maximum operating temperature 3C. Let sit for 242 hours at room temperature, then measure. The charge/ discharge current is less than 50mA. Appearance No defects or abnormalities. Capacitance R6 : Within 12.5% Change D.F. R6 : 0.2 max. *2 GMD155 R6 1A 274 to 474 are applied to 120%. * Initial measurement Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature. Perform the initial measurement. 14 Durability I.R. More than 25 * F * Measurement after test Perform a heat treatment at 150+0/-10C for one hour and then let sit for 242 hours at room temperature, then measure. Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding. when tests No. 11 to 14 are performed. Gold wire Die bond Gold wire High Frequency GQM Series Capacitor Alumina substrate Gold land For Bonding GMD Series Monolithic Microchip GMA Series Gold land Product Information Alumina substrate Array GNM Series D.F. Low ESL LLp Series High Temperature 13 High Humidity (Steady) High-Q GJM Series No. When no "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1). When "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2). For General GRM Series GMD Series Specifications and Test Methods (2) GMD Series Specifications and Test Methods (2) 127 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Package Minimum Quantity Guide Part Number Dimensions (mm) L W T Low ESL LLp Series Array GNM Series Packaging Code GRM02 GRM03 0.4 0.6 0.2 0.3 GRM15 1.0 0.5 GRM18 1.6 0.8 GRM21 2.0 1.25 GRM31 3.2 1.6 GRM32 3.2 2.5 For General Purpose 0.2 0.3 0.25/0.3 0.5 0.5 0.8 0.6 0.85 1.0/1.25 0.6/0.85 1.15 1.6 0.85 1.15 1.35 1.6 1.8/2.0 2.5 High-Q GJM Series 1.15 High Frequency Microchip Monolithic Microchip GMA Series High Frequency GQM Series High Power Type Product Information Package For Bonding GMD Series Array Low ESL 1) 2) 3) 4) GRM43 4.5 3.2 GRM55 5.7 5.0 GJM03 GJM15 GQM18 GQM21 GQM22 GMA0D GMA05 GMA08 GMD03 GMD15 GNM0M GNM1M GNM21 0.6 1.0 1.6 2.0 2.8 0.38 0.5 0.8 0.6 1.0 0.9 1.37 2.0 0.3 0.5 0.8 1.25 2.8 0.38 0.5 0.8 0.3 0.5 0.6 1.0 1.25 GNM31 3.2 1.6 LLL15 LLL18/LLR18 0.5 0.8 1.0 1.6 LLL21 1.25 2.0 LLL31 1.6 3.2 LLA18 1.6 0.8 LLA21 2.0 1.25 LLA31 3.2 1.6 LLM21 LLM31 2.0 3.2 1.25 1.6 1.35/1.6 1.8/2.0 2.5 2.8 1.15 1.35/1.6 1.8/2.0 2.5 3.2 0.3 0.5 0.7/0.8 0.85 1.15 0.3 0.35 0.5 0.3 0.5 0.45 0.5/0.6/0.8 0.5/0.6/0.85 0.8/0.85 1.0/1.15 0.3 0.5 0.5/0.6 0.85 0.5/0.7 1.15 0.5 0.5 0.85 0.5 0.85 1.15 0.5 0.5 o180mm Reel Paper Tape Embossed Tape Quantity (pcs.) o330mm Reel Paper Tape Embossed Tape Bulk Case D L J K C 15,000 10,000 10,000 4,000 4,000 4,000 4,000 4,000 4,000 15,000 10,000 4,000 4,000 15,000 10,000 10,000 4,000 4,000 4,000 10,000 4) - 40,000 1) 3,000 3,000 2,000 3,000 2,000 2,000 1,000 1,000 1,000 500 500 1,000 1,000 500 300 1,000 3,000 4,000 4,000 3,000 4,000 3,000 4,000 4,000 3,000 4,000 3,000 3,000 4,000 4,000 50,000 50,000 50,000 10,000 10,000 10,000 10,000 10,000 10,000 50,000 50,000 10,000 10,000 50,000 50,000 50,000 10,000 10,000 10,000 50,000 4) - 10,000 10,000 6,000 10,000 8,000 6,000 4,000 5,000 4,000 2,000 1,500 5,000 4,000 2,000 1,500 4,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 50,000 2) 15,000 2) 10,000 5,000 2) 50,000 - Bulk Bag Bulk : B Tray : T 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 1,000 1,000 500 500 1,000 1,000 1,000 1,000 1,000 400 3) 400 3) 400 3) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 4mm width, 1mm pitch Embossed Taping. There are parts without bulk case package. Tray LLL15: o180mm Reel Paper Taping Packaging Code: E, o330mm Reel Paper Taping Packaging Code: F Continued on the following page. 128 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Package Continued from the preceding page. Tape Carrier Packaging (1) Dimensions of Reel o330mm Reel Array GNM Series o180mm Reel 2.00.5 2.00.5 o3302.0 o50 min. o50 min. o21.00.8 o180+0 - 3.0 o13.00.5 o13.00.5 o21.00.8 Low ESL LLp Series 51.5 for 4mm wide tape 101.5 for 8mm wide tape 141.5 for 12mm wide tape 101.5 for 8mm wide tape 141.5 for 12mm wide tape High-Q GJM Series (in mm) (2) Dimensions of Paper Tape 8mm width, 2mm pitch Tape 4.00.1 A 1.050.1 1.850.1 GNM1M 1.170.05 1.550.05 GRM21 (TV0.85mm) GQM21 GNM21 1.550.15 2.30.15 A* B* GJM03 GRM03 GMD03 Part Number 0.37 0.67 GJM15 GRM15 GMD15 LLL15 0.65 1.15 GNM0M 0.72 1.02 Monolithic Microchip GMA Series B GRM18 GQM18 For Bonding GMD Series A 1.750.1 Direction of Feed Direction of Feed Part Number 2.00.1 +0.1 o1.5 -0 *Nominal Value GRM31 (TV0.85mm) GNM31 (TV0.8mm) 2.00.2 3.60.2 GRM32 (TV0.85mm) 2.80.2 3.60.2 (in mm) Continued on the following page. 129 Product Information Package B A 2.00.05 3.50.05 1.1 max. 1.750.1 B 2.00.1 8.00.3 +0.1 o1.5- 0 3.50.05 4.00.1 0.5 max. (GJM03/GRM03/GMD03) 0.8 max. (GJM15/GRM15/GMD15 LLL15/GNM0M) High Frequency GQM Series 4.00.1 8.00.3 8mm width, 4mm pitch Tape PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. (3) Dimensions of Embossed Tape 4mm width, 1mm pitch Tape B A Low ESL LLp Series GRM02 A* B* 0.23 0.43 *Nominal Value 12mm width, 8mm pitch Tape +0.1 5.50.1 High-Q GJM Series 8.00.1 2.00.1 4.00.1 B A Direction of feed 0.30.1 12.00.3 o1.5 -0 1.750.1 1.750.1 A 0.5 max. Part Number 2.00.1 4.00.1 o1.5 -0 3.50.05 1.80.02 Array GNM Series +0.1 0.15 to 0.4 B 1.00.02 o0.80.04 0.20.1 (LLp) 0.250.1 (TV2.0mm) 0.30.1 (T=2.5mm) 4.00.1 4.00.05 1.00.02 8mm width, 4mm pitch Tape 0.90.05 2.00.04 2.5 max. for GRM43/55 (3.7 max. for T=2.5mm) (4.7 max. for TU3.0mm) Direction of feed 8.00.3 For General GRM Series Package 2.5 max. (3.0 max. for T=1.8/2.0mm) (3.7 max. for TU2.5mm) Part Number A B LLL18, LLR18 LLA18 1.050.1 1.850.1 GRM21 (TU1.0mm) LLL21 LLA21, LLM21 1.450.2 2.250.2 GRM31 (TU1.15mm) LLL31 LLA31, LLM31 GNM31 (TU1.0mm) 1.90.2 3.50.2 GRM32 (TU1.0mm) 2.80.2 3.50.2 2.8* 3.5* GQM22 *Nominal Value Product Information Package For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series Part Number A* B* GRM43 3.6 4.9 GRM55 5.2 6.1 *Nominal Value (4) Taping Method q Tapes for capacitors are wound clockwise. The sprocket holes are to the right as the tape is pulled toward the user. w Part of the leader and part of the empty tape should be attached to the end of the tape as follows. e The top tape and base tape are not attached at the end of the tape for a minimum of 5 pitches. r Missing capacitors number within 0.1% of the number per reel or 1 pc, whichever is greater, and are not continuous. t The top tape and bottom tape should not protrude beyond the edges of the tape and should not cover sprocket holes. y Cumulative tolerance of sprocket holes, 10 pitches: 0.3mm. u Peeling off force: 0.1 to 0.6N* in the direction shown at right. *GRM02 GRM03 : 0.05 to 0.5N GJM03 GMD03 } (in mm) Vacant Section Chip-mounting Unit Vacant Section Leader unit 160 min. 190 min. Direction of Feed 210 min. (Top Tape alone) (in mm) 165 to 180 Top Tape Base Tape Continued on the following page. 130 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Package Continued from the preceding page. Dimensions of Bulk Case Packaging 6.8 8.8 12.0 The bulk case uses antistatic materials. Please contact Murata for details. 31.5 36.0 Array GNM Series 1.5 2.0 3.0 110 Product Information Package For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series (in mm) 131 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Storage and Operation conditions 1. The performance of chip monolithic ceramic capacitors may be affected by the storage conditions. 1-1. Store capacitors in the following conditions: Temperature of +5C to +40C and a Relative Humidity of 20% to 70%. (1) Sunlight, dust, rapid temperature changes, corrosive gas atmosphere or high temperature and humidity conditions during storage may affect the solderability and the packaging performance. Please use product within six months of receipt. (2) Please confirm solderability before using after six months. Store the capacitors without opening the original bag. Even if the storage period is short, do not exceed the specified atmospheric conditions. Product Information !Caution For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series For General GRM Series !Caution 132 1-2. Corrosive gas can react with the termination (external) electrodes or lead wires of capacitors, and result in poor solderability. Do not store the capacitors in an atmosphere consisting of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.). 1-3. Due to moisture condensation caused by rapid humidity changes, or the photochemical change caused by direct sunlight on the terminal electrodes and/or the resin/epoxy coatings, the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or in high humidity conditions. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1. Temperature Dependent Characteristics 1. The electrical characteristics of the capacitor can change with temperature. 1-1. For capacitors having larger temperature dependency, the capacitance may change with temperature changes. The following actions are recommended in order to ensure suitable capacitance values. (1) Select a suitable capacitance for the operating temperature range. 20 15 15 10 5 0 -5 -10 -15 -50 -25 0 25 50 75 100 Temperature (C) 10 5 0 High-Q GJM Series Capacitance Change (%) 20 -20 -75 Low ESL LLp Series Typical Temperature Characteristics R7(X7R) Typical Temperature Characteristics R6(X5R) -5 -10 -15 -20 -75 -50 -25 0 25 50 75 100 125 150 Temperature (C) High Frequency GQM Series Typical Temperature Characteristics F5(Y5V) 20 0 -20 -40 Monolithic Microchip GMA Series Capacitance Change (%) 40 -60 -80 -100 -50 -25 0 25 50 75 100 Temperature (C) For Bonding GMD Series 2. Measurement of Capacitance 1. Measure capacitance with the voltage and the frequency specified in the product specifications. 1-1. The output voltage of the measuring equipment may decrease occasionally when capacitance is high. Please confirm whether a prescribed measured voltage is impressed to the capacitor. 1-2. The capacitance values of high dielectric constant type capacitors change depending on the AC voltage applied. Please consider the AC voltage characteristics when selecting a capacitor to be used in an AC circuit. Continued on the following page. 133 Product Information !Caution Capacitance Change (%) (2) The capacitance may change within the rated temperature. When you use a high dielectric constant type capacitor in a circuit that needs a tight (narrow) capacitance tolerance. (e. g., a time constant circuit), please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. And check capacitors using your actual appliances at the intended environment and operating conditions. Array GNM Series Rating For General GRM Series !Caution !Caution PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Low ESL LLp Series Array GNM Series For General GRM Series !Caution Continued from the preceding page. 3. Applied Voltage 1. Do not apply a voltage to the capacitor that exceeds the rated voltage as called out in the specifications. 1-1. Applied voltage between the terminals of a capacitor shall be less than or equal to the rated voltage. (1) When AC voltage is superimposed on DC voltage, the zero-to-peak voltage shall not exceed the rated DC voltage. When AC voltage or pulse voltage is applied, the peak-to-peak voltage shall not exceed the rated DC voltage. (2) Abnormal voltages (surge voltage, static electricity, pulse voltage, etc.) shall not exceed the rated DC voltage. Typical Voltage Applied to the DC Capacitor DC Voltage E AC Voltage E Pulse Voltage 0 E 0 High-Q GJM Series High Frequency GQM Series Monolithic Microchip GMA Series E 0 0 (E: Maximum possible applied voltage.) 1-2. Influence of overvoltage Overvoltage that is applied to the capacitor may result in an electrical short circuit caused by the breakdown of the internal dielectric layers. The time duration until breakdown depends on the applied voltage and the ambient temperature. 4. Applied Voltage and Self-heating Temperature 1. When the capacitor is used in a high-frequency voltage, pulse voltage, application, be sure to take into account self-heating may be caused by resistant factors of the capacitor. 1-1. The load should be contained to the level such that when measuring at atmospheric temperature of 25C, the product's self-heating remains below 20C and surface temperature of the capacitor in the actual circuit remains within the maximum operating temperature. Continued on the following page. Product Information !Caution For Bonding GMD Series DC Voltage+AC 134 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution For General GRM Series !Caution Continued from the preceding page. [DC Voltage Characteristics] 0 -20 Array GNM Series Capacitance Change (%) 20 -40 -60 -80 -100 0 1 2 3 4 5 6 7 High-Q GJM Series Low ESL LLp Series DC Voltage (VDC) [AC Voltage Characteristics] 30 High Frequency GQM Series 20 10 0 -10 -20 -30 -40 -50 -60 0.0 0.5 1.0 1.5 2.0 2.5 AC Voltage (Vr.m.s.) 20 For Bonding GMD Series 10 0 -10 -20 5C -30 R -40 10 100 1000 10000 Time (Hr) Continued on the following page. 135 Product Information !Caution Capacitor Change (%) 6. Capacitance Aging 1. The high dielectric constant type capacitors have the characteristic in which the capacitance value decreases with passage of time. When you use a high dielectric constant type capacitors in a circuit that needs a tight (narrow) capacitance tolerance (e. g., a time constant circuit), please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. In addition, check capacitors using your actual appliances at the intended environment and operating conditions. Monolithic Microchip GMA Series Capacitance Change (%) 5. DC Voltage and AC Voltage Characteristics 1. The capacitance value of a high dielectric constant type capacitor changes depending on the DC voltage applied. Please consider the DC voltage characteristics when a capacitor is selected for use in a DC circuit. 1-1. The capacitance of ceramic capacitors may change sharply depending on the applied voltage (see figure). Please confirm the following in order to secure the capacitance. (1) Whether the capacitance change caused by the applied voltage is within the range allowed or not. (2) In the DC voltage characteristics, the rate of capacitance change becomes larger as voltage increases, even if the applied voltage is below the rated voltage. When a high dielectric constant type capacitor is in a circuit that needs a tight (narrow) capacitance tolerance (e. g., a time constant circuit), please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. In addition, check capacitors using your actual appliances at the intended environment and operating conditions. 2. The capacitance values of high dielectric constant type capacitors change depending on the AC voltage applied. Please consider the AC voltage characteristics when selecting a capacitor to be used in an AC circuit. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. 7. Vibration and Shock 1. The capacitor's mechanical stress (vibration and shock) shall be specified for the use environment. Please confirm the kind of vibration and/or shock, its condition, and any generation of resonance. Please mount the capacitor so as not to generate resonance, and do not allow any impact on the terminals. 2. Mechanical shock due to being dropped may cause damage or a crack in the dielectric material of the capacitor. Do not use a dropped capacitor because the quality and reliability may be deteriorated. 3. When printed circuit boards are piled up or handled, the corners of another printed circuit board should not be allowed to hit the capacitor, in order to avoid a crack or other damage to the capacitor. Product Information !Caution For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series For General GRM Series !Caution 136 Crack Floor Mounting printed circuit board Crack PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution For General GRM Series !Caution Soldering and Mounting 1. Mounting Position [Component Direction] Locate chip horizontal to the direction in which stress acts. [Chip Mounting Close to Board Separation Point] Perforation Chip arrangement Worst A-C-(B~D) Best D Slit Low ESL LLp Series A C B Array GNM Series 1. Confirm the best mounting position and direction that minimizes the stress imposed on the capacitor during flexing or bending the printed circuit board. 1-1. Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. 3. Maintenance of the Mounting (pick and place) Machine [Incorrect] Suction Nozzle Deflection Board Board Guide [Correct] Support Pin For Bonding GMD Series 1. Make sure that the following excessive forces are not applied to the capacitors. 1-1. In mounting the capacitors on the printed circuit board, any bending force against them shall be kept to a minimum to prevent them from any bending damage or cracking. Please take into account the following precautions and recommendations for use in your process. (1) Adjust the lowest position of the pickup nozzle so as not to bend the printed circuit board. (2) Adjust the nozzle pressure within a static load of 1N to 3N during mounting. 2. Dirt particles and dust accumulated between the suction nozzle and the cylinder inner wall prevent the nozzle from moving smoothly. This imposes greater force upon the chip during mounting, causing cracked chips. Also the locating claw, when worn out, imposes uneven forces on the chip when positioning, causing cracked chips. The suction nozzle and the locating claw must be maintained, checked and replaced periodically. Monolithic Microchip GMA Series High Frequency GQM Series 5. Prior to use, confirm the solderability of capacitors that were in long-term storage. 6. Prior to measuring capacitance, carry out a heat treatment for capacitors that were in long-term storage. 7. The use of Sn-Zn based solder will deteriorate the reliability of the MLCC. Please contact our sales representative or product engineers on the use of Sn-Zn based solder in advance. Continued on the following page. 137 Product Information !Caution 1. Do not reuse capacitors that were removed from the equipment. 2. Confirm capacitance characteristics under actual applied voltage. 3. Confirm the mechanical stress under actual process and equipment use. 4. Confirm the rated capacitance, rated voltage and other electrical characteristics before assembly. High-Q GJM Series 2. Information before Mounting PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Low ESL LLp Series Array GNM Series For General GRM Series !Caution Continued from the preceding page. 4-1. Reflow Soldering 1. When sudden heat is applied to the components, the mechanical strength of the components will decrease because a sudden temperature change causes deformation inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board. Preheating conditions are shown in table 1. It is required to keep the temperature differential between the solder and the component's surface (T) as small as possible. 2. Solderability of Tin plating termination chips might be deteriorated when a low temperature soldering profile where the peak solder temperature is below the melting point of Tin is used. Please confirm the Solderability of Tin plated termination chips before use. 3. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (T) between the component and the solvent within the range shown in the table 1. [Standard Conditions for Reflow Soldering] ,,, ,,, ,,, ,,, ,,, ,,, ,,, ,,, ,,, Infrared Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling 200C T 170C 150C 130C Preheating Time 60-120 seconds 30-60 seconds Vapor Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling T 170C 150C 130C High-Q GJM Series Table 1 Part Number Temperature Differential Preheating GRM02/03/15/18/21/31 GJM03/15 TV190C LLL15/18/21/31 60-120 seconds LLR18 GRM32/43/55 [Allowable Reflow Soldering Temperature and Time] LLA18/21/31 TV130C LLM21/31 GNM GQM22 Product Information !Caution For Bonding GMD Series Monolithic Microchip GMA Series Recommended Conditions Pb-Sn Solder Infrared Reflow Vapor Reflow Lead Free Solder Peak Temperature 230 to 250C 230 to 240C 240 to 260C Atmosphere Air Air Air or N2 Soldering Temperature (D) High Frequency GQM Series GQM18/21 Time 20 seconds max. 280 270 260 250 240 230 220 0 30 60 90 120 Soldering Time (sec.) In a case of repeated soldering, the accumulated soldering time must be within the range shown above. Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu 4. Optimum Solder Amount for Reflow Soldering 4-1. Overly thick application of solder paste results in a excessive solder fillet height. This makes the chip more susceptible to mechanical and thermal stress on the board and may cause the chips to crack. 4-2. Too little solder paste results in a lack of adhesive strength on the outer electrode, which may result in chips breaking loose from the PCB. 4-3. Make sure the solder has been applied smoothly to the end surface to a height of 0.2mm* min. 0.2mm min. GRM02/03: 1/3 of Chip Thickness min. in section Inverting the PCB Make sure not to impose any abnormal mechanical shocks to the PCB. Continued on the following page. 138 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution For General GRM Series !Caution Continued from the preceding page. 4-2. Flow Soldering Part Number Temperature Differential Soldering Gradual Cooling T Array GNM Series Soldering Peak Temperature Preheating Peak Temperature Preheating 30-90 seconds Time 5 seconds max. Low ESL LLp Series [Allowable Flow Soldering Temperature and Time] 280 270 260 250 240 230 220 0 10 20 30 40 Soldering Time (sec.) In a case of repeated soldering, the accumulated soldering time must be within the range shown above. GRM18/21/31 TV150C LLL21/31 Temperature (D) High-Q GJM Series Table 2 ,,,, ,,,, ,,,, ,,, ,,, [Standard Conditions for Flow Soldering] Soldering Temperature (D) 1. When sudden heat is applied to the components, the mechanical strength of the components will decrease because a sudden temperature change causes deformation inside the components. In order to prevent mechanical damage in the components, preheating should be required for both of the components and the PCB board. Preheating conditions are shown in table 2. It is required to keep the temperature differential between the solder and the component's surface (T) as small as possible. 2. Excessively long soldering time or high soldering temperature can result in leaching of the outer electrodes, causing poor adhesion or a reduction in capacitance value due to loss of contact between electrodes and end termination. 3. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (T) between the component and solvent within the range shown in the table 2. 4. Do not apply flow soldering to chips not listed in table 2. Pb-Sn Solder Lead Free Solder Preheating Peak Temperature 90 to 110C 100 to 120C Soldering Peak Temperature 240 to 250C 250 to 260C Atmosphere Air N2 Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu 5. Optimum Solder Amount for Flow Soldering 5-1. The top of the solder fillet should be lower than the thickness of components. If the solder amount is excessive, the risk of cracking is higher during board bending or any other stressful condition. Up to Chip Thickness Adhesive in section Product Information !Caution Continued on the following page. For Bonding GMD Series Recommended Conditions Monolithic Microchip GMA Series High Frequency GQM Series GQM18/21 139 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series For General GRM Series !Caution Continued from the preceding page. 4-3. Correction with a Soldering Iron 1. When sudden heat is applied to the components when using a soldering iron, the mechanical strength of the components will decrease because the extreme temperature change can cause deformations inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board. Preheating conditions, (The "Temperature of the Soldering Iron Tip", "Preheating Temperature," "Temperature Differential" between the iron tip and the components and the PCB), should be within the conditions of table 3. It is required to keep the temperature differential between the soldering iron and the component surfaces (T) as small as possible. 2. After soldering, do not allow the component/PCB to rapidly cool down. 3. The operating time for the re-working should be as short as possible. When re-working time is too long, it may cause solder leaching, in turn causing a reduction in the adhesive strength of the terminations. 4. Optimum Solder amount when re-working with a Soldering lron 4-1. For sizes smaller than 0603, (GRM03/15/18, GJM03/15, GQM18), the top of the solder fillet should be lower than 2/3's of the thickness of the component or 0.5mm whichever is smaller. For 0805 and larger sizes, (GRM21/31/32/43/55, GQM21/22), the top of the solder fillet should be lower than 2/3's of the thickness of the component. If the solder amount is excessive, the risk of cracking is higher during board bending or under any other stressful condition. 4-2. A soldering iron with a tip of o3mm or smaller should be used. It is also necessary to keep the soldering iron from touching the components during the re-work. 4-3. Solder wire with o0.5mm or smaller is required for soldering. Table 3 Part Number Temperature Preheating Temperature of Soldering Differential Atmosphere Iron Tip Temperature (T) GRM03/15/18/21/31 GJM03/15 350C max. 150C min. TV190C Air 280C max. 150C min. TV130C Air GQM18/21 GRM32/43/55 GQM22 *Applicable for both Pb-Sn and Lead Free Solder. Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Solder Amount in section 4-4. Leaded Component Insertion 1. If the PCB is flexed when leaded components (such as transformers and ICs) are being mounted, chips may crack and solder joints may break. Before mounting leaded components, support the PCB using backup pins or special jigs to prevent warping. Product Information !Caution 5. Washing Excessive ultrasonic oscillation during cleaning can cause the PCBs to resonate, resulting in cracked chips or broken solder joints. Take note not to vibrate PCBs. Continued on the following page. 140 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution For General GRM Series !Caution Continued from the preceding page. 6. Electrical Test on Printed Circuit Board [Not Recommended] Peeling Test-pin Array GNM Series 1. Confirm position of the support pin or specific jig, when inspecting the electrical performance of a capacitor after mounting on the printed circuit board. 1-1. Avoid bending printed circuit board by the pressure of a test pin, etc. The thrusting force of the test probe can flex the PCB, resulting in cracked chips or open solder joints. Provide support pins on the back side of the PCB to prevent warping or flexing. 1-2. Avoid vibration of the board by shock when a test pin contacts a printed circuit board. [Recommended] Support Pin Low ESL LLp Series Test-pin 7. Printed Circuit Board Cropping [Bending] High-Q GJM Series 1. After mounting a capacitor on a printed circuit board, do not apply any stress to the capacitor that is caused by bending or twisting the board. 1-1. In cropping the board, the stress as shown right may cause the capacitor to crack. Try not to apply this type of stress to a capacitor. Printed Circuit Board Direction of Load For Bonding GMD Series V-groove Board Cropping Jig Recommended Printed Circuit Board Monolithic Microchip GMA Series [Outline of Jig] Not recommended Direction of Load Load Point Components Load Point Printed Circuit Board Components Continued on the following page. 141 Product Information !Caution 2. Ascertain of the cropping method for the printed circuit board in advance. 2-1. Printed circuit board cropping shall be carried out by using a jig or an apparatus to prevent the mechanical stress that can occur to the board. (1) Example of a suitable jig Recommended example: the board should be pushed as close to the cropping jig as possible and from the back side of board in order to minimize the compressive stress applied to capacitor. Not recommended example: when the board is pushed at a point far from the cropping jig and from the front side of board as below, the capacitor may form a crack caused by the tensile stress applied to capacitor. High Frequency GQM Series [Twisting] PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. (2) Example of a suitable machine An outline of a printed circuit board cropping machine is shown as follows. Along the lines with the V-grooves on the printed circuit board, the top and bottom blades are aligned to one another when cropping the board. The misalignment of the position between top and bottom blades may cause the capacitor to crack. Array GNM Series For General GRM Series !Caution [Outline of Machine] Top Blade Printed Circuit Board Top Blade [Principle of Operation] Bottom Blade V-groove [Cross-section Diagram] Low ESL LLp Series Printed Circuit Board V-groove Recommended Not Recommended Top-bottom Misalignment Left-right Misalignment Front-rear Misalignment Top Blade Top Blade Top Blade Bottom Blade Bottom Blade Bottom Blade Bottom Blade Product Information !Caution For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Top Blade 142 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Array GNM Series For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series If the equipment is not turned off or unplugged, the hazards may be worsened by supplying continuous power. (2) In this type of situation, do not allow face and hands to come in contact with the capacitor or burns may be caused by the capacitor's high temperature. 2-2. Disposal of Waste When capacitors are disposed, they must be burned or buried by an industrial waste vendor with the appropriate licenses. 2-3. Circuit Design GRM, GCM, GMA/D, LLL/A/M, GQM, GJM, GNM Series capacitors in this catalog are not safety certified products. 2-4. Remarks Failure to follow the cautions may result, worst case, in a short circuit and smoking when the product is used. The above notices are for standard applications and conditions. Contact us when the products are used in special mounting conditions. Select optimum conditions for operation as they determine the reliability of the product after assembly. The data herein are given in typical values, not guaranteed ratings. Product Information !Caution 1. Under Operation of Equipment 1-1. Do not touch a capacitor directly with bare hands during operation in order to avoid the danger of an electric shock. 1-2. Do not allow the terminals of a capacitor to come in contact with any conductive objects (short-circuit). Do not expose a capacitor to a conductive liquid, including any acid or alkali solutions. 1-3. Confirm the environment in which the equipment will operate is under the specified conditions. Do not use the equipment under the following environments. (1) Being spattered with water or oil. (2) Being exposed to direct sunlight. (3) Being exposed to Ozone, ultraviolet rays or radiation. (4) Being exposed to toxic gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.) (5) Any vibrations or mechanical shocks exceeding the specified limits. (6) Moisture condensing environments. 1-4. Use damp proof countermeasures if using under any conditions that can cause condensation. 2. Others 2-1. In an Emergency (1) If the equipment should generate smoke, fire or smell, immediately turn off or unplug the equipment. Low ESL LLp Series Others For General GRM Series !Caution High-Q GJM Series !Caution 143 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Rating 1. Operating Temperature 1. The operating temperature limit depends on the capacitor. 1-1. Do not apply temperatures exceeding the upper operating temperature. It is necessary to select a capacitor with a suitable rated temperature that will cover the operating temperature range. Also it is necessary to consider the temperature distribution in equipment and the seasonal temperature variable factor. 1-2. Consider the self-heating of the capacitor. The surface temperature of the capacitor shall be the upper operating temperature or less when including the self-heating factors. 2. Atmosphere Surroundings (gaseous and liquid) 1. Restriction on the operating environment of capacitors. 1-1. Capacitors, when used in the above, unsuitable, operating environments may deteriorate due to the corrosion of the terminations and the penetration of moisture into the capacitor. Product Information Notice For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series For General GRM Series Notice 144 1-2. The same phenomenon as the above may occur when the electrodes or terminals of the capacitor are subject to moisture condensation. 1-3. The deterioration of characteristics and insulation resistance due to the oxidization or corrosion of terminal electrodes may result in breakdown when the capacitor is exposed to corrosive or volatile gases or solvents for long periods of time. 3. Piezo-electric Phenomenon 1. When using high dielectric constant type capacitors in AC or pulse circuits, the capacitor itself vibrates at specific frequencies and noise may be generated. Moreover, when the mechanical vibration or shock is added to the capacitor, noise may occur. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice For General GRM Series Notice Soldering and Mounting Low ESL LLp Series Array GNM Series 1. PCB Design 1. Notice for Pattern Forms 1-1. Unlike leaded components, chip components are susceptible to flexing stresses since they are mounted directly on the substrate. They are also more sensitive to mechanical and thermal stresses than leaded components. Excess solder fillet height can multiply these stresses and cause chip cracking. When designing substrates, take land patterns and dimensions into consideration to eliminate the possibility of excess solder fillet height. 1-2. It is possible for the chip to crack by the expansion and shrinkage of a metal board. Please contact us if you want to use our ceramic capacitors on a metal board such as Aluminum. Pattern Forms Prohibited Correct High-Q GJM Series Chassis Solder (ground) Solder Resist Placing Close to Chassis Electrode Pattern High Frequency GQM Series Lead Wire Solder Resist Placing of Chip Components and Leaded Components Soldering Iron Lead Wire Solder Resist Monolithic Microchip GMA Series Placing of Leaded Components after Chip Component Solder Resist Product Information Notice Continued on the following page. For Bonding GMD Series Lateral Mounting 145 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Array GNM Series For General GRM Series Notice Continued from the preceding page. 2. Land Dimensions 2-1. A chip capacitor can be cracked due to the stress of PCB bending / etc if the land area is larger than needed and has an excess amount of solder. Please refer to the land dimensions in table 1 for flow soldering, table 2 for reflow soldering, table 3 for GNM & LLA, and table 4 for LLM. Please confirm the suitable land dimension by evaluating the actual SET / PCB. Chip Capacitor Land c b a Solder Resist Table 1 Flow Soldering Method Dimensions Chip (LgW) a b c GRM18 GQM18 1.6g0.8 0.6 to 1.0 0.8 to 0.9 0.6 to 0.8 GRM21 GQM21 2.0g1.25 1.0 to 1.2 0.9 to 1.0 0.8 to 1.1 GRM31 3.2g1.6 2.2 to 2.6 1.0 to 1.1 1.0 to 1.4 LLL21 1.25g2.0 0.4 to 0.7 0.5 to 0.7 1.4 to 1.8 LLL31 1.6g3.2 0.6 to 1.0 0.8 to 0.9 2.6 to 2.8 Low ESL LLp Series Part Number Table 2 Reflow Soldering Method Dimensions Chip (LgW) a b c GRM02 0.4g0.2 0.16 to 0.2 0.12 to 0.18 0.2 to 0.23 GRM03 GJM03 0.6g0.3 0.2 to 0.3 0.2 to 0.35 0.2 to 0.4 GRM15 GJM15 1.0g0.5 0.3 to 0.5 0.35 to 0.45 0.4 to 0.6 GRM18 GQM18 1.6g0.8 0.6 to 0.8 0.6 to 0.7 0.6 to 0.8 GRM21 GQM21 2.0g1.25 1.0 to 1.2 0.6 to 0.7 0.8 to 1.1 GRM31 3.2g1.6 2.2 to 2.4 0.8 to 0.9 1.0 to 1.4 GRM32 3.2g2.5 2.0 to 2.4 1.0 to 1.2 1.8 to 2.3 GRM43 4.5g3.2 3.0 to 3.5 1.2 to 1.4 2.3 to 3.0 GRM55 5.7g5.0 4.0 to 4.6 1.4 to 1.6 3.5 to 4.8 LLL15 0.5g1.0 0.15 to 0.2 0.2 to 0.25 0.7 to 1.0 LLL18 LLR18 0.8g1.6 0.2 to 0.3 0.3 to 0.4 1.4 to 1.6 LLL21 1.25g2.0 0.4 to 0.6 0.4 to 0.5 1.4 to 1.8 LLL31 1.6g3.2 0.6 to 0.8 0.6 to 0.7 2.6 to 2.8 GQM22 3.2g2.5 2.2 to 2.5 0.8 to 1.0 1.9 to 2.3 Part Number For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series (in mm) (in mm) Product Information Notice Continued on the following page. 146 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice For General GRM Series Notice Continued from the preceding page. GNMpp2 GNMpp4 LLA Chip Capacitor Chip Capacitor a a b b Land p c Array GNM Series c Land p Table 3 GNM, LLA Series for Reflow Soldering Land Dimensions L W a b c p GNM0M2 0.9 0.6 0.12 to 0.20* 0.35 to 0.40* 0.3 0.45 GNM1M2 1.37 1.0 0.4 to 0.5 0.35 to 0.45 0.3 to 0.35 0.64 GNM212 2.0 1.25 0.6 to 0.7 0.5 to 0.7 0.4 to 0.5 1.0 GNM214 2.0 1.25 0.6 to 0.7 0.5 to 0.7 0.25 to 0.35 0.5 GNM314 3.2 1.6 0.8 to 1.0 0.7 to 0.9 0.3 to 0.4 0.8 LLA18 1.6 0.8 0.3 to 0.4 0.25 to 0.35 0.15 to 0.25 0.4 0.2 to 0.3 0.5 0.3 to 0.4 0.8 LLA21 2.0 1.25 0.5 to 0.7 0.35 to 0.6 LLA31 3.2 1.6 0.7 to 0.9 0.4 to 0.7 Low ESL LLp Series Dimensions (mm) Part Number p LLM High-Q GJM Series * 0.82Va+2bV1.00 c b e a Chip Capacitor c' High Frequency GQM Series b' f d Table 4 LLM Series for Reflow Soldering Land Dimensions a b, b' c, c' d e f p LLM21 0.6 to 0.8 (0.3 to 0.5) 0.3 2.0 to 2.6 1.3 to 1.8 1.4 to 1.6 0.5 LLM31 1.0 (0.3 to 0.5) 0.4 3.2 to 3.6 1.6 to 2.0 2.6 0.8 Monolithic Microchip GMA Series Dimensions (mm) Part Number b=(c-e)/2, b'=(d-f)/2 2. Adhesive Application Part Number GRM18, GQM18 a=20 to 70m b=30 to 35m c=50 to 105m a For Bonding GMD Series Chip Capacitor c Board Adhesive Land b Product Information Notice 1. Thin or insufficient adhesive can cause the chips to loosen or become disconnected during flow soldering. The amount of adhesive must be more than dimension c, shown in the drawing at right, to obtain the correct bonding strength. The chip's electrode thickness and land thickness must also be taken into consideration. 2. Low viscosity adhesive can cause chips to slip after mounting. The adhesive must have a viscosity of 5000Pa * s (500ps) min. (at 25C). 3. Adhesive Coverage Adhesive Coverage* 0.05mg min. GRM21, LLL21, GQM21 0.1mg min. GRM31, LLL31 0.15mg min. *Nominal Value Continued on the following page. 147 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High-Q GJM Series Low ESL LLp Series Array GNM Series For General GRM Series Notice Continued from the preceding page. 3. Adhesive Curing 1. Insufficient curing of the adhesive can cause chips to disconnect during flow soldering and deterioration in the insulation resistance between the outer electrodes due to moisture absorption. Control curing temperature and time in order to prevent insufficient hardening. 4. Flux Application 1. An excessive amount of flux generates a large quantity of flux gas, which can cause a deterioration of Solderability. Therefore apply flux thinly and evenly throughout. (A foaming system is generally used for flow soldering.) 2. Flux containing too high a percentage of halide may cause corrosion of the outer electrodes unless there is sufficient cleaning. Use flux with a halide content of 0.2% max. 3. Do not use strong acidic flux. 4. Do not use water-soluble *flux. (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 5. Flow Soldering o Set temperature and time to ensure that leaching of the outer electrode does not exceed 25% of the chip end area as a single chip (full length of the edge A-B-C-D shown right) and 25% of the length A-B shown below as mounted on substrate. [As a Single Chip] A B D Outer Electrode [As Mounted on Substrate] B A 6. Washing 1. Please evaluate a capacitor by actual cleaning equipment and conditions to confirm the quality and select the applicable solvent. 2. Unsuitable cleaning solvent may leave residual flux or other foreign substances, causing deterioration of electrical characteristics and the reliability of the capacitors. 3. Select the proper cleaning conditions. 3-1. Improper cleaning conditions (excessive or insufficient) may result in the deterioration of the performance of the capacitors. Continued on the following page. Product Information Notice For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series C 148 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1. A crack may be caused in the capacitor due to the stress of the thermal contraction of the resin during curing process. The stress is affected by the amount of resin and curing contraction. Select a resin with small curing contraction. The difference in the thermal expansion coefficient between a coating resin or a molding resin and the capacitor may cause the destruction and deterioration of the capacitor such as a crack or peeling, and lead to the deterioration of insulation resistance or dielectric breakdown. Select a resin for which the thermal expansion coefficient is as close to that of capacitor as possible. A silicone resin can be used as an under-coating to buffer against the stress. 2. Select a resin that is less hygroscopic. Using hygroscopic resins under high humidity conditions may cause the deterioration of the insulation resistance of a capacitor. An epoxy resin can be used as a less hygroscopic resin. 8. Die Bonding/Wire Bonding (GMA or GMD Series) For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series 2. Wire Bonding * Wire Gold wire: 25 micro m (0.001 inch) diameter * Bonding (1) Thermo compression, ultrasonic ball bonding. (2) Required stage temperature: 150 to 200 C (3) Required wedge or capillary weight: 0.2N to 0.5N (4) Bond the capacitor and base substrate or other devices with gold wire. Product Information Notice 1. Die Bonding of Capacitors * Use the following materials for the Brazing alloys: Au-Sn (80/20) 300 to 320 C in N2 atmosphere * Mounting (1) Control the temperature of the substrate so it matches the temperature of the brazing alloy. (2) Place the brazing alloy on the substrate and place the capacitor on the alloy. Hold the capacitor and gently apply the load. Be sure to complete the operation within 1 minute. Array GNM Series 7. Coating Low ESL LLp Series Continued from the preceding page. For General GRM Series Notice High-Q GJM Series Notice 149 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Others 1. Transportation 1. The performance of a capacitor may be affected by the conditions during transportation. 1-1. The capacitors shall be protected against excessive temperature, humidity and mechanical force during transportation. (1) Climatic condition * low air temperature: -40C * change of temperature air/air: -25C/+25C * low air pressure: 30 kPa * change of air pressure: 6 kPa/min. (2) Mechanical condition Transportation shall be done in such a way that the boxes are not deformed and forces are not directly passed on to the inner packaging. Product Information Notice For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series Low ESL LLp Series Array GNM Series For General GRM Series Notice 150 1-2. Do not apply excessive vibration, shock, and pressure to the capacitor. (1) When excessive mechanical shock or pressure is applied to a capacitor, chipping or cracking may occur in the ceramic body of the capacitor. (2) When the sharp edge of an air driver, a soldering iron, tweezers, a chassis, etc. impacts strongly on the surface of capacitor, the capacitor may crack and short-circuit. 1-3. Do not use a capacitor to which excessive shock was applied by dropping, etc. The capacitor dropped accidentally during processing may be damaged. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (2) Test Samples GRM21 : Products for flow/reflow soldering. (3) Acceptance Criteria With a 60-power optical microscope, measure the surface area of the outer electrode that is covered with solder. (4) Results Refer to Table 1. Array GNM Series 1. Solderability (1) Test Method Subject the chip capacitor to the following conditions. Then apply flux (an ethanol solution of 25% rosin) to the chip and dip it in 230D eutectic solder for 2 seconds. Conditions: Expose prepared at room temperature (for 6 months and 12 months, respectively) Prepared at high temperature (for 100 hours at 85D) Prepared left at high humidity (for 100 hours under 90%RH to 95%RH at 40D) For General GRM Series Reference Data Initial State GRM21 for flow/reflow soldering 95 to 100% 6 months 12 months Prepared at High Temperature for 100 Hours at 85D 95 to 100% 95% 90 to 95% Prepared at Room Temperature Prepared at High Humidity for 100 Hours at 90 to 95% RH and 40D 95% High-Q GJM Series 2. Board Bending Strength for Solder Fillet Height (1) Test Method Solder the chip capacitor to the test PCB with the amount of solder paste necessary to achieve the fillet heights. Then bend the PCB using the method illustrated and measure capacitance. 20 50 R230 Supporting Base 45 Capacitance Meter 1.65 1.2 40 1.0 S T W X \ (c) VYZ[^(c)[\ZXY(R)^_]WVTSTS(R)|]ZYWUVQR, ZY(R)|]VUQ, 45 Pressurizing Speed: 1.0mm/sec. Pressurize Note : The material of pressure application jig and support is the quenched metal. (hardness HB 183-255 or superhardness HRA90 or more) Flexure High Frequency GQM Series Capacitor 4.0 100 Material : Glass Epoxy : Copper Foil (0.35mm thick) : Solder Resist Solder Amount Larger Fillet. Fillet up to Chip Thickness 1.6 (in mm) For Bonding GMD Series (2) Test Samples GRM21: 5C/R7/F5 Characteristics T=0.6mm Product Information Reference Data (3) Acceptance Criteria Products should be determined to be defective if the change in capacitance has exceeded the values specified in Table 2. Table 2 1 Characteristics Change in Capacitance 5C Within T5% or T0.5pF, whichever is greater R7 Within T12.5% F5 Within T20% Monolithic Microchip GMA Series Sample Low ESL LLp Series Table 1 Continued on the following page. 151 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. (4) Results R S T W X \ (c) S T X (c) (R)(c)_^]Z[\XW(R)^]Y|YUVSRQ,_\(R)]^Y(c)|^YZ[XUVWSQR, T _\(R)|_]^[YZVU(c)|[ZVWXUTRSQ,Q, For General GRM Series Reference Data GRM21 5C (T=0.6) GRM21 R7 (T=0.6) 100 80 Survival Rate (%) Array GNM Series Survival Rate (%) 100 Fillet up to Chip Thickness 60 Larger Fillet 40 20 80 Fillet up to Chip Thickness 60 40 Larger Fillet 20 0 0 0 2 4 Flexure (mm) 6 8 0 2 4 Flexure (mm) 6 8 Low ESL LLp Series GRM21 F5 (T=0.6) Survival Rate (%) 100 80 Fillet up to Chip Thickness 60 40 Larger Fillet 20 0 High-Q GJM Series 0 2 4 Flexure (mm) 6 8 (1) Test Method Solder the chips to the substrate of various test fixtures using sufficient amounts of solder to achieve the required fillet height. Then subject the fixtures to the cycle illustrated at right 200 times. [Temperature Cycling] +125D Room Temperature Time (min.) -55D 5 30 [Solder Amount] Substrate Glass Epoxy or Paper Phenol 1.3T 0.7T q T 0.5T Alumina w e 6Z4 Eutectic solder Solder to be used e Land Dimension 30 T q Solder Amount Alumina substrates are typically designed for reflow soldering. Glass epoxy or paper phenol substrates are typically used for flow soldering. w Material Alumina (Thickness: 0.64mm) Glass epoxy (Thickness: 1.64mm) Paper phenol (Thickness: 1.64mm) Solder Amount For Bonding GMD Series Monolithic Microchip GMA Series 5 1.6T High Frequency GQM Series 3. Temperature Cycling for Solder Fillet Height [Land Dimension] 1.5 Product Information Reference Data Land Pattern Alumina Substrate 1.5 1.2 1.5 (in mm) Glass Epoxy Substrate Paper Phenol Substrate Ag/Pd=72/28 Thickness: 10 to 12m Cu Thickness: 35m Continued on the following page. 152 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Reference Data Continued from the preceding page. (2) Test Samples GRM21 5C/R7/F5 Characteristics T=0.6mm Array GNM Series (3) Acceptance Criteria Products are determined to be defective if the change in capacitance has exceeded the values specified in Table 3. Table 3 Change in Capacitance 5C Within T2.5% or T0.25pF, whichever is greater R7 Within T7.5% F5 Within T20% Low ESL LLp Series (4) Results Alumina Substrate (Thickness 0.64mm) GRM21 R7 (T=0.6) 60 40 20 0 0 50 e qw 100 150 200 Number of Cycles 100 80 e 60 40 20 0 0 50 w q 100 150 200 Number of Cycles 80 e 60 High-Q GJM Series 80 Accumulated Percent Defective (%) Accumulated Percent Defective (%) GRM21 F5 (T=0.6) 100 Accumulated Percent Defective (%) GRM21 5C (T=0.6) 100 40 w 20 0 0 50 100 q 150 200 Number of Cycles GRM21 R7 (T=0.6) 60 40 20 0 0 e 50 qw 100 150 200 Number of Cycles 100 80 60 40 e 20 0 0 50 qw 100 150 200 Number of Cycles 80 60 40 Monolithic Microchip GMA Series 80 Accumulated Percent Defective (%) Accumulated Percent Defective (%) GRM21 F5 (T=0.6) 100 Accumulated Percent Defective (%) GRM21 5C (T=0.6) 100 High Frequency GQM Series Glass Epoxy Substrate (Thickness 1.6mm) e 20 0 0 50 100 qw 150 200 Number of Cycles Paper Phenol Substrate (Thickness 1.6mm) GRM21 F5 (T=0.6) 40 20 50 qwe 100 150 200 Number of Cycles 100 80 60 40 20 0 0 For Bonding GMD Series 60 Accumulated Percent Defective (%) Accumulated Percent Defective (%) 80 0 0 GRM21 R7 (T=0.6) 100 e 50 qw 100 150 200 Number of Cycles Accumulated Percent Defective (%) GRM21 5C (T=0.6) 100 80 60 40 20 0 0 50 100 e qw 150 200 Number of Cycles Continued on the following page. 153 Product Information Reference Data Characteristics PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. 4. Board Bending Strength for Board Material (1) Test Method Solder the chip to the test board. Then bend the board using the method illustrated below, to measure capacitance. 20 Capacitor Array GNM Series For General GRM Series Reference Data (c)\X(c)X|YU\_^[STRQ,(c)\[XVWRQ,|U Y X (c) , R Q U T S W V [ Z ] \ ^ _ | (R) _^ |U R230 1.65 45 1.2 Pressurizing Speed: 1.0mm/sec. Pressurize Note : Material of the pressurizing jig and the supporting base must be hardened steel (Hardness : HB183 to 255 or carbide Hardness : HRA90 min.) Flexure Capacitance Meter Low ESL LLp Series 40 1.0 45 Supporting Base 50 4.0 Solder Amount Up to Chip Thickness 1.6 100 (in mm) (2) Test Samples GRM21 5C/R7/F5 Characteristics T=0.6mm typical (3) Acceptance Criteria Products should be determined to be defective if the change in capacitance has exceeded the values specified in Table 4. Table 4 Characteristics Change in Capacitance 5C Within T5% or T0.5pF, whichever is greater R7 Within T12.5% F5 Within T20% (4) Results S T T , Q R S T U V W Y X Z [ \ ^ _ | (c) T W X Z [ \ _ (c) , Q R U | _^\[(R)](R)|]ZYWVURQ,(R)^](R)(c)|_^]\[ZXYWVUSRQ, T (c)_\[ZXWT(R)(c)|_^]\[ZXYWVUTSRQ,|VUSRQ, (R)_^]Z |YU Monolithic Microchip GMA Series High Frequency GQM Series High-Q GJM Series : Copper Foil (0.035mm thick) : Solder Resist GRM21 R7 (T=0.6) GRM21 5C (T=0.6) 100 100 Paper Phenol For Bonding GMD Series Survival Rate (%) Survival Rate (%) Paper Phenol 80 60 Glass Epoxy 40 20 80 60 40 Glass Epoxy 20 0 0 0 2 4 Flexure (mm) 6 8 0 2 4 Flexure (mm) 6 8 GRM21 F5 (T=0.6) Product Information Reference Data Survival Rate (%) 100 Paper Phenol 80 60 40 Glass Epoxy 20 0 0 2 4 Flexure (mm) 6 8 Continued on the following page. 154 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Reference Data Continued from the preceding page. 5. Break Strength Loading Jig End Array GNM Series 1.0mm Sample P0.5mm Steel plate (3) Acceptance Criteria Define the load that has caused the chip to break or crack, as the bending force. W Chip Size L 5C R7 F5 Charac- Charac- Characteristics teristics teristics W T (4) Explanation Break strength, P, is proportionate to the square of the thickness of the ceramic element and is expressed as a curve of secondary degree. The formula is: 2 WT2 P= (N) 3L W : Width of ceramic element (mm) T : Thickness of element (mm) L : Distance between fulcrums (mm) : Bending stress (N/mm2) L GRM21 1.5 1.2 GRM31 2.7 1.5 300 180 Low ESL LLp Series (2) Test Samples GRM21 5C/R7/F5 Characteristics GRM31 5C/R7/F5 Characteristics P Pressurizing speed: 2.5mm/sec. Amplifier Load cell Storage scope T S X W \ (c) (R)]^_YZ|UQR, (1) Test Method Place the chip on a steel plate as illustrated on the right. Increase load applied to a point near the center of the test sample. 160 High-Q GJM Series (in mm) GRM21 GRM31 100 80 60 40 20 0 0 0.4 0.8 1.2 Thickness of Ceramic Element (mm) 1.6 140 5C 120 100 R7 80 60 40 20 0 0 0.4 0.8 1.2 Thickness of Ceramic Element (mm) 6. Thermal Shock Dipping Speed: 25mm/sec. ,Q|RU ^ (R) ] \UY| (1) Test method After applying flux (an ethanol solution of 25% rosin), dip the chip in a solder bath (6Z4 eutectic solder) in accordance with the following conditions: F5 Monolithic Microchip GMA Series F5 Chip Capacitor 1.6 For Bonding GMD Series R7 Temperature 5C Bending-break Strength (N) Bending-break Strength (N) 140 120 High Frequency GQM Series (5) Results Solder Temperature T Natural Cooling Solder Bath 2 sec. Time (3) Acceptance criteria Visually inspect the test sample with a 60-power optical microscope. Chips exhibiting breaks or cracks should be determined to be defective. Continued on the following page. 155 Product Information Reference Data 25D (2) Test samples GRM21 5C/R7/F5 Characteristics T=0.6mm typical PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. (4) Results Incidence of Cracks (%) 100 Array GNM Series For General GRM Series Reference Data 80 60 F5 40 R7 20 5C 0 200 240 280 320 360 Temperature Differential T (D) High-Q GJM Series Low ESL LLp Series 7. Solder Heat Resistance (1) Test Method q Reflow soldering: Apply about 300 m of solder paste over the alumina substrate. After reflow soldering, remove the chip and check for leaching that may have occurred on the outer electrode. w Flow soldering: After dipping the test sample with a pair of tweezers in wave solder (eutectic solder), check for leaching that may have occurred on the outer electrode. e Dip soldering: After dipping the test sample with a pair of tweezers in static solder (eutectic solder), check for leaching that may have occurred on the outer electrode. r Flux to be used: An ethanol solution of 25% rosin. High Frequency GQM Series (3) Acceptance criteria The starting time of leaching should be defined as the time when the outer electrode has lost 25% of the total edge length of A-B-C-D as illustrated: Monolithic Microchip GMA Series (2) Test samples GRM21: For flow/reflow soldering T=0.6mm (4) Results A B D C Outer Electrode Flow Soldering Soldering Temperature (D) For Bonding GMD Series Soldering Temperature (D) Reflow Soldering 280 270 260 250 240 230 220 210 0 60 120 180 240 Leaching Starting Time (sec.) 280 270 260 250 240 230 220 210 0 10 20 30 40 50 60 Leaching Starting Time (sec.) Product Information Reference Data Soldering Temperature (D) Dip Soldering 280 270 260 250 240 230 220 210 0 10 20 30 40 50 60 Leaching Starting Time (sec.) Continued on the following page. 156 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General GRM Series Reference Data Continued from the preceding page. 8. Thermal Shock when Making Corrections with a Soldering Iron (1) Test Method Apply a soldering iron meeting the conditions below to the soldered joint of a chip that has been soldered to a paper phenol board, while supplying wire solder. (Note: the soldering iron tip should not directly touch the ceramic element of the chip.) Mounting Solder Soldering lron Wire Solder Array GNM Series Duration of Touching : Approx. 3 sec. Paper Phenol Substrate (2) Test Samples GRM21 5C/R7/F5 Characteristics T=0.6mm Soldering Iron Tip Diameter Ceramic heater 20W o3mm Low ESL LLp Series (3) Acceptance Criteria for Defects Observe the appearance of the test sample with a 60-power optical microscope. Those units displaying any breaks or cracks are determined to be defective. (4) Results GRM21 R7 (T=0.6) 60 40 20 0 200 240 280 320 Soldering Iron Tip Temperature (D) 360 High-Q GJM Series 80 100 80 60 40 20 0 200 240 280 320 Soldering Iron Tip Temperature (D) 360 High Frequency GQM Series 100 Incidence of Cracks (%) Incidence of Cracks (%) GRM21 5C (T=0.6) 80 60 Monolithic Microchip GMA Series 40 20 240 280 320 Soldering Iron Tip Temperature (D) 360 For Bonding GMD Series 0 200 Product Information Reference Data Incidence of Cracks (%) GRM21 F5 (T=0.6) 100 157 PDF catalog is downloaded from!CAUTION the website(for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 176 177 179 180 183 184 3 AC250V Type (Which Meet Japanese Law) GA2 Series Specifications and Test Methods 187 188 4 Safety Standard Certified GA3 Series 4-1 UL, IEC60384-14 Class X1/Y2 Type GC 4-2 IEC60384-14 Class Y2, X1/Y2 Type GF 4-3 IEC60384-14 Class Y3 Type GD 4-4 IEC60384-14 Class X2 Type GB Specifications and Test Methods 191 192 194 195 196 Reference Data (Typical Example) Package !Caution Notice 200 203 206 214 Only for Applications Only for Applications 2-1 For LCD Backlight Inverter Circuit GRM/DC3.15kV Series Specifications and Test Methods 2-2 For Information Devices GR4 Series Specifications and Test Methods 2-3 For Camera Flash Circuit GR7 Series Specifications and Test Methods 2 AC250V Type GA2 Series 160 164 166 168 171 173 Safety Standard Certified GA3 Series For General Purpose GRM/GRJ Series 1-1 Low Dissipation Factor GRM Series Specifications and Test Methods 1-2 High Capacitance for General Use GRM Series Specifications and Test Methods 1-3 Soft Termination Type GRJ Series Specifications and Test Methods 1 Product Information Chip Monolithic Ceramic Capacitors (Medium Voltage) For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Chip Monolithic Ceramic Capacitors (Medium Voltage) Low Dissipation Factor GRM Series e g e Features 1. Low-loss and suitable for high frequency circuits 2. Murata's original internal electrode structure provides high flash-over voltage. 3. A new monolithic structure for small, surfacemountable devices capable of operating at high voltage levels 4. Sn-plated external electrodes provides good solderability. 5. Use the GRM21/31 type with flow or reflow soldering, and other types with reflow soldering only. T Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. L W Dimensions (mm) W T e min. 1.0 +0,- 0.3 1.25 0.2 1.25 0.2 1.0 +0,- 0.3 1.6 0.2 1.25 +0,- 0.3 0.3 1.0 +0,- 0.3 2.5 0.2 1.25 +0,- 0.3 2.0 0.2 1.0 +0,- 0.3 Part Number L GRM21A 2.0 0.2 GRM21B GRM31A 3.2 0.2 GRM31B GRM32A 3.2 0.2 GRM32B GRM42A 4.5 0.3 * GRM31A7U3D, GRM32A7U3D, GRM32B7U3D: 1.8mm min. g min. 0.7 1.5* 2.9 Applications Ideal for use on high frequency pulse circuits such as snubber circuits for switching power supplies, DC-DC converters, ballasts (inverter fluorescent lamps), etc. Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. C0G Characteristics Electrode g min. (mm) Electrode e (mm) 1.0 0.7 0.3 min. 1.0 0.7 0.3 min. 1.25 1.0 0.7 0.3 min. 1.25 1.0 0.7 0.3 min. 2.0 1.25 1.0 0.7 0.3 min. 27 5% 2.0 1.25 1.0 0.7 0.3 min. C0G (EIA) 33 5% 2.0 1.25 1.0 0.7 0.3 min. DC250 C0G (EIA) 39 5% 2.0 1.25 1.0 0.7 0.3 min. DC250 C0G (EIA) 47 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A5C2E560JW01D DC250 C0G (EIA) 56 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A5C2E680JW01D DC250 C0G (EIA) 68 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A5C2E820JW01D DC250 C0G (EIA) 82 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A5C2E101JW01D DC250 C0G (EIA) 100 5% 2.0 1.25 1.0 0.7 0.3 min. GRM31A5C2J100JW01D DC630 C0G (EIA) 10 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J120JW01D DC630 C0G (EIA) 12 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J150JW01D DC630 C0G (EIA) 15 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J180JW01D DC630 C0G (EIA) 18 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J220JW01D DC630 C0G (EIA) 22 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J270JW01D DC630 C0G (EIA) 27 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J330JW01D DC630 C0G (EIA) 33 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J390JW01D DC630 C0G (EIA) 39 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J470JW01D DC630 C0G (EIA) 47 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J560JW01D DC630 C0G (EIA) 56 5% 3.2 1.6 1.0 1.5 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GRM21A5C2E100JW01D DC250 C0G (EIA) 10 5% 2.0 1.25 GRM21A5C2E120JW01D DC250 C0G (EIA) 12 5% 2.0 1.25 GRM21A5C2E150JW01D DC250 C0G (EIA) 15 5% 2.0 GRM21A5C2E180JW01D DC250 C0G (EIA) 18 5% 2.0 GRM21A5C2E220JW01D DC250 C0G (EIA) 22 5% GRM21A5C2E270JW01D DC250 C0G (EIA) GRM21A5C2E330JW01D DC250 GRM21A5C2E390JW01D GRM21A5C2E470JW01D Continued on the following page. 160 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 0.3 min. 1.5 0.3 min. 1.6 1.0 1.5 0.3 min. 3.2 1.6 1.0 1.5 0.3 min. 150 5% 3.2 1.6 1.0 1.5 0.3 min. 180 5% 3.2 1.6 1.0 1.5 0.3 min. C0G (EIA) 220 5% 3.2 1.6 1.0 1.5 0.3 min. DC630 C0G (EIA) 270 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J331JW01D DC630 C0G (EIA) 330 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J391JW01D DC630 C0G (EIA) 390 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J471JW01D DC630 C0G (EIA) 470 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C2J561JW01D DC630 C0G (EIA) 560 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31B5C2J681JW01L DC630 C0G (EIA) 680 5% 3.2 1.6 1.25 1.5 0.3 min. GRM31B5C2J821JW01L DC630 C0G (EIA) 820 5% 3.2 1.6 1.25 1.5 0.3 min. GRM31B5C2J102JW01L DC630 C0G (EIA) 1000 5% 3.2 1.6 1.25 1.5 0.3 min. GRM31A5C3A100JW01D DC1000 C0G (EIA) 10 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A120JW01D DC1000 C0G (EIA) 12 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A150JW01D DC1000 C0G (EIA) 15 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A180JW01D DC1000 C0G (EIA) 18 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A220JW01D DC1000 C0G (EIA) 22 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A270JW01D DC1000 C0G (EIA) 27 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A330JW01D DC1000 C0G (EIA) 33 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A390JW01D DC1000 C0G (EIA) 39 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A470JW01D DC1000 C0G (EIA) 47 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A560JW01D DC1000 C0G (EIA) 56 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A680JW01D DC1000 C0G (EIA) 68 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A820JW01D DC1000 C0G (EIA) 82 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A5C3A101JW01D DC1000 C0G (EIA) 100 5% 3.2 1.6 1.0 1.5 0.3 min. Electrode g min. (mm) Electrode e (mm) Length L Width W Thickness T (mm) (mm) (mm) GRM31A5C2J680JW01D DC630 C0G (EIA) 68 5% 3.2 1.6 GRM31A5C2J820JW01D DC630 C0G (EIA) 82 5% 3.2 1.6 GRM31A5C2J101JW01D DC630 C0G (EIA) 100 5% 3.2 GRM31A5C2J121JW01D DC630 C0G (EIA) 120 5% GRM31A5C2J151JW01D DC630 C0G (EIA) GRM31A5C2J181JW01D DC630 C0G (EIA) GRM31A5C2J221JW01D DC630 GRM31A5C2J271JW01D U2J Characteristics Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GRM21A7U2E101JW31D DC250 U2J (EIA) 100 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E121JW31D DC250 U2J (EIA) 120 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E151JW31D DC250 U2J (EIA) 150 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E181JW31D DC250 U2J (EIA) 180 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E221JW31D DC250 U2J (EIA) 220 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E271JW31D DC250 U2J (EIA) 270 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E331JW31D DC250 U2J (EIA) 330 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E391JW31D DC250 U2J (EIA) 390 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E471JW31D DC250 U2J (EIA) 470 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E561JW31D DC250 U2J (EIA) 560 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E681JW31D DC250 U2J (EIA) 680 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E821JW31D DC250 U2J (EIA) 820 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E102JW31D DC250 U2J (EIA) 1000 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E122JW31D DC250 U2J (EIA) 1200 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E152JW31D DC250 U2J (EIA) 1500 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E182JW31D DC250 U2J (EIA) 1800 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21A7U2E222JW31D DC250 U2J (EIA) 2200 5% 2.0 1.25 1.0 0.7 0.3 min. GRM21B7U2E272JW32L DC250 U2J (EIA) 2700 5% 2.0 1.25 1.25 0.7 0.3 min. GRM31A7U2E272JW31D DC250 U2J (EIA) 2700 5% 3.2 1.6 1.0 1.5 0.3 min. GRM21B7U2E332JW32L DC250 U2J (EIA) 3300 5% 2.0 1.25 1.25 0.7 0.3 min. GRM31A7U2E332JW31D DC250 U2J (EIA) 3300 5% 3.2 1.6 1.0 1.5 0.3 min. GRM21B7U2E392JW32L DC250 U2J (EIA) 3900 5% 2.0 1.25 1.25 0.7 0.3 min. GRM31A7U2E392JW31D DC250 U2J (EIA) 3900 5% 3.2 1.6 1.0 1.5 0.3 min. Continued on the following page. 161 Only for Applications 1.5 1.0 Capacitance (pF) AC250V Type GA2 Series 1.0 TC Code (Standard) Safety Standard Certified GA3 Series Electrode e (mm) Rated Voltage (V) Product Information Electrode g min. (mm) Part Number For General Purpose GRM/GRJ Series Continued from the preceding page. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series Continued from the preceding page. Electrode g min. (mm) Electrode e (mm) 1.25 0.7 0.3 min. 1.0 1.5 0.3 min. 1.25 1.25 0.7 0.3 min. 3.2 1.6 1.0 1.5 0.3 min. 6800 5% 3.2 1.6 1.25 1.5 0.3 min. 8200 5% 3.2 1.6 1.25 1.5 0.3 min. U2J (EIA) 10000 5% 3.2 1.6 1.25 1.5 0.3 min. DC630 U2J (EIA) 10 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J120JW31D DC630 U2J (EIA) 12 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J150JW31D DC630 U2J (EIA) 15 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J180JW31D DC630 U2J (EIA) 18 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J220JW31D DC630 U2J (EIA) 22 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J270JW31D DC630 U2J (EIA) 27 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J330JW31D DC630 U2J (EIA) 33 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J390JW31D DC630 U2J (EIA) 39 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J470JW31D DC630 U2J (EIA) 47 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J560JW31D DC630 U2J (EIA) 56 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J680JW31D DC630 U2J (EIA) 68 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J820JW31D DC630 U2J (EIA) 82 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J101JW31D DC630 U2J (EIA) 100 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J121JW31D DC630 U2J (EIA) 120 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J151JW31D DC630 U2J (EIA) 150 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J181JW31D DC630 U2J (EIA) 180 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J221JW31D DC630 U2J (EIA) 220 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J271JW31D DC630 U2J (EIA) 270 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J331JW31D DC630 U2J (EIA) 330 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J391JW31D DC630 U2J (EIA) 390 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J471JW31D DC630 U2J (EIA) 470 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J561JW31D DC630 U2J (EIA) 560 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J681JW31D DC630 U2J (EIA) 680 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J821JW31D DC630 U2J (EIA) 820 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U2J102JW31D DC630 U2J (EIA) 1000 5% 3.2 1.6 1.0 1.5 0.3 min. GRM32A7U2J122JW31D DC630 U2J (EIA) 1200 5% 3.2 2.5 1.0 1.5 0.3 min. GRM32A7U2J152JW31D DC630 U2J (EIA) 1500 5% 3.2 2.5 1.0 1.5 0.3 min. GRM32A7U2J182JW31D DC630 U2J (EIA) 1800 5% 3.2 2.5 1.0 1.5 0.3 min. GRM32A7U2J222JW31D DC630 U2J (EIA) 2200 5% 3.2 2.5 1.0 1.5 0.3 min. GRM31A7U3A100JW31D DC1000 U2J (EIA) 10 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A120JW31D DC1000 U2J (EIA) 12 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A150JW31D DC1000 U2J (EIA) 15 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A180JW31D DC1000 U2J (EIA) 18 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A220JW31D DC1000 U2J (EIA) 22 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A270JW31D DC1000 U2J (EIA) 27 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A330JW31D DC1000 U2J (EIA) 33 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A390JW31D DC1000 U2J (EIA) 39 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A470JW31D DC1000 U2J (EIA) 47 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A560JW31D DC1000 U2J (EIA) 56 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A680JW31D DC1000 U2J (EIA) 68 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A820JW31D DC1000 U2J (EIA) 82 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A101JW31D DC1000 U2J (EIA) 100 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A121JW31D DC1000 U2J (EIA) 120 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A151JW31D DC1000 U2J (EIA) 150 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A181JW31D DC1000 U2J (EIA) 180 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A221JW31D DC1000 U2J (EIA) 220 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A271JW31D DC1000 U2J (EIA) 270 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31A7U3A331JW31D DC1000 U2J (EIA) 330 5% 3.2 1.6 1.0 1.5 0.3 min. GRM31B7U3A391JW31L DC1000 U2J (EIA) 390 5% 3.2 1.6 1.25 1.5 0.3 min. GRM31B7U3A471JW31L DC1000 U2J (EIA) 470 5% 3.2 1.6 1.25 1.5 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GRM21B7U2E472JW32L DC250 U2J (EIA) 4700 5% 2.0 1.25 GRM31A7U2E472JW31D DC250 U2J (EIA) 4700 5% 3.2 1.6 GRM21B7U2E562JW32L DC250 U2J (EIA) 5600 5% 2.0 GRM31A7U2E562JW31D DC250 U2J (EIA) 5600 5% GRM31B7U2E682JW31L DC250 U2J (EIA) GRM31B7U2E822JW31L DC250 U2J (EIA) GRM31B7U2E103JW31L DC250 GRM31A7U2J100JW31D Continued on the following page. 162 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 0.3 min. 1.8 0.3 min. 1.6 1.0 1.8 0.3 min. 3.2 1.6 1.0 1.8 0.3 min. 22 5% 3.2 1.6 1.0 1.8 0.3 min. 27 5% 3.2 1.6 1.0 1.8 0.3 min. U2J (EIA) 33 5% 3.2 1.6 1.0 1.8 0.3 min. DC2000 U2J (EIA) 39 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D470JW31D DC2000 U2J (EIA) 47 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D560JW31D DC2000 U2J (EIA) 56 5% 3.2 1.6 1.0 1.8 0.3 min. GRM31A7U3D680JW31D DC2000 U2J (EIA) 68 5% 3.2 1.6 1.0 1.8 0.3 min. GRM32A7U3D820JW31D DC2000 U2J (EIA) 82 5% 3.2 2.5 1.0 1.8 0.3 min. GRM32A7U3D101JW31D DC2000 U2J (EIA) 100 5% 3.2 2.5 1.0 1.8 0.3 min. GRM32A7U3D121JW31D DC2000 U2J (EIA) 120 5% 3.2 2.5 1.0 1.8 0.3 min. GRM32A7U3D151JW31D DC2000 U2J (EIA) 150 5% 3.2 2.5 1.0 1.8 0.3 min. GRM32B7U3D181JW31L DC2000 U2J (EIA) 180 5% 3.2 2.5 1.25 1.8 0.3 min. GRM32B7U3D221JW31L DC2000 U2J (EIA) 220 5% 3.2 2.5 1.25 1.8 0.3 min. GRM42A7U3F270JW31L DC3150 U2J (EIA) 27 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F330JW31L DC3150 U2J (EIA) 33 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F390JW31L DC3150 U2J (EIA) 39 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F470JW31L DC3150 U2J (EIA) 47 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F560JW31L DC3150 U2J (EIA) 56 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F680JW31L DC3150 U2J (EIA) 68 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F820JW31L DC3150 U2J (EIA) 82 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A7U3F101JW31L DC3150 U2J (EIA) 100 5% 4.5 2.0 1.0 2.9 0.3 min. Length L Width W Thickness T (mm) (mm) (mm) GRM31A7U3D100JW31D DC2000 U2J (EIA) 10 5% 3.2 1.6 GRM31A7U3D120JW31D DC2000 U2J (EIA) 12 5% 3.2 1.6 GRM31A7U3D150JW31D DC2000 U2J (EIA) 15 5% 3.2 GRM31A7U3D180JW31D DC2000 U2J (EIA) 18 5% GRM31A7U3D220JW31D DC2000 U2J (EIA) GRM31A7U3D270JW31D DC2000 U2J (EIA) GRM31A7U3D330JW31D DC2000 GRM31A7U3D390JW31D Only for Applications 1.8 1.0 Capacitance (pF) AC250V Type GA2 Series 1.0 TC Code (Standard) Safety Standard Certified GA3 Series Electrode e (mm) Rated Voltage (V) Product Information Electrode g min. (mm) Part Number For General Purpose GRM/GRJ Series Continued from the preceding page. 163 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Medium Voltage Low Dissipation Factor Specifications and Test Methods GRM Series Specifications and Test Methods No. Item Specifications Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimension Using calipers and micrometers Y No failure should be observed when voltage in the Table is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 4 Dielectric Strength No defects or abnormalities 5 Insulation Resistance (I.R.) More than 10,000M 6 Capacitance Within the specified tolerance 7 Q 1,000 min. Capacitance Temperature Characteristics Temp. Coefficient C0G char. : 0T30ppm/D (Temp. Range : W25 to W125D) 0W30, Y72ppm/D (Temp. Range : Y55 to W25D) U2J char. : Y750T120ppm/D (Temp. Range : W25 to W125D) Y750W120, Y347ppm/D (Temp. Range : Y55 to W25D) 8 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Rated Voltage DC250V DC630V DC1kV, DC2kV, DC3.15kV Test Voltage 200% of the rated voltage 150% of the rated voltage 130% of the rated voltage The insulation resistance should be measured with DC500T50V (DC250T25V in case of rated voltage: DC250V) and within 60T5 sec. of charging. The capacitance/Q should be measured at the frequency and voltage shown as follows. Capacitance CF1,000pF CU1,000pF Frequency 1T0.2MHz 1T0.2kHz Voltage AC0.5 to 5V(r.m.s.) AC1T0.2V(r.m.s.) The capacitance measurement should be made at each step specified in the Table. Step 1 2 3 4 5 Temperature (D) 25T2 Min. Operating Temp.T3 25T2 Max. Operating Temp.T2 25T2 Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 10 Appearance No defects or abnormalities Capacitance Within the specified tolerance Q 1,000 min. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board Continued on the following page. 164 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Continued from the preceding page. Test Method b 4.5 c 40 d Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. a 100 11 Deflection 20 50 Pressurizing speed: 1.0mm/s Pressurize t : 1.6 Fig. 2 LZW (mm) 2.0Z1.25 3.2Z1.6 3.2Z2.5 4.5Z2.0 12 Solderability of Termination 14 Dimension (mm) b c 4.0 1.65 5.0 2.0 5.0 2.9 7.0 2.4 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance Change Within T2.5% Resistance Q 13 to Soldering I.R. Heat a 1.2 2.2 2.2 3.5 R230 Flexure=1 d Capacitance meter 45 1.0 (in mm) 45 Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150D* for 1 min. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition* for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s 1,000 min. More than 10,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T2.5% Q 500 min. I.R. More than 10,000M Dielectric Strength In accordance with item No.4 Temperature Cycle *Preheating for more than 3.2Z2.5mm Step 1 2 Temperature 100 to 120D 170 to 200D Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition,* then measure. Step 1 2 3 4 Temperature (D) Min. Operating Temp.T3 Room Temp. Max. Operating Temp.T2 Room Temp. Time (min.) 30T3 2 to 3 30T3 2 to 3 Solder resist Cu Glass Epoxy Board Fig. 4 Humidity 15 (Steady State) 16 Life Appearance No marking defects Capacitance Change Within T5.0% Q 350 min. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T3.0% Q 350 min. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Let the capacitor sit at 40T2D and relative humidity of 90 to 95% for 500W24 Y 0 hrs. Remove and let sit for 24T2 hrs. at room condition,* then measure. Apply voltage as in Table for 1,000W48 Y 0hrs. at maximum operating temperature T3D. Remove and let sit for 24T2 hrs. at room condition,* then measure. Rated Voltage DC250V DC630V, DC1kV, DC2kV, DC3.15kV Applied Voltage 150% of the rated voltage 120% of the rated voltage The charge/discharge current is less than 50mA. * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 165 AC250V Type GA2 Series No marking defects Safety Standard Certified GA3 Series Specifications Product Information Item [ X W (c) V R Q , T S _(c)X\UY|Z^(R)]|UQ, No. Only for Applications Medium Voltage Low Dissipation Factor and Testand Methods GRMSpecifications Series Specifications Test Methods For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Chip Monolithic Ceramic Capacitors (Medium Voltage) High Capacitance for General Use GRM Series e g e Features 1. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 2. Sn-plated external electrodes provide good solderability. 3. Use the GRM18/21/31 types with flow or reflow soldering, and other types with reflow soldering only. T Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. L Part Number GRM188 GRM21A GRM21B GRM31B GRM31C GRM32Q GRM32D GRM43Q GRM43D GRM55D Applications L W Dimensions (mm) W T 1.6 0.1 0.8 0.1 2.0 0.2 1.25 0.2 3.2 0.2 1.6 0.2 3.2 0.3 2.5 0.2 4.5 0.4 3.2 0.3 5.7 0.4 5.0 0.4 e 0.8 0.1 0.2 to 0.5 1.0 +0,-0.3 1.25 0.2 1.25 +0,-0.3 1.6 0.2 1.5 +0,-0.3 0.3 min. 2.0 +0,-0.3 1.5 +0,-0.3 2.0 +0,-0.3 2.0 +0,-0.3 g min. 0.4 0.7 1.2 2.2 3.2 1. Ideal for use on diode-snubber circuits for switching power supplies. 2. Ideal for use as primary-secondary coupling for DC-DC converters. 3. Ideal for use on line filters and ringer detectors for telephones, facsimiles and modems. Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Electrode g min. (mm) Electrode e (mm) 0.8 0.4 0.2 to 0.5 0.8 0.4 0.2 to 0.5 0.8 0.8 0.4 0.2 to 0.5 0.8 0.8 0.4 0.2 to 0.5 1.6 0.8 0.8 0.4 0.2 to 0.5 2.0 1.25 1.0 0.7 0.3 min. 1500pF 10% 1.6 0.8 0.8 0.4 0.2 to 0.5 X7R (EIA) 1500pF 10% 2.0 1.25 1.0 0.7 0.3 min. X7R (EIA) 2200pF 10% 1.6 0.8 0.8 0.4 0.2 to 0.5 DC250 X7R (EIA) 2200pF 10% 2.0 1.25 1.0 0.7 0.3 min. DC250 X7R (EIA) 3300pF 10% 2.0 1.25 1.0 0.7 0.3 min. GRM21AR72E472KW01D DC250 X7R (EIA) 4700pF 10% 2.0 1.25 1.0 0.7 0.3 min. GRM21AR72E682KW01D DC250 X7R (EIA) 6800pF 10% 2.0 1.25 1.0 0.7 0.3 min. GRM21BR72E103KW03L DC250 X7R (EIA) 10000pF 10% 2.0 1.25 1.25 0.7 0.3 min. GRM31BR72E153KW01L DC250 X7R (EIA) 15000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72E223KW01L DC250 X7R (EIA) 22000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31CR72E333KW03L DC250 X7R (EIA) 33000pF 10% 3.2 1.6 1.6 1.2 0.3 min. GRM31CR72E473KW03L DC250 X7R (EIA) 47000pF 10% 3.2 1.6 1.6 1.2 0.3 min. GRM31BR72E683KW01L DC250 X7R (EIA) 68000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM32QR72E683KW01L DC250 X7R (EIA) 68000pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRM31CR72E104KW03L DC250 X7R (EIA) 0.10F 10% 3.2 1.6 1.6 1.2 0.3 min. GRM32DR72E104KW01L DC250 X7R (EIA) 0.10F 10% 3.2 2.5 2.0 1.2 0.3 min. GRM32QR72E154KW01L DC250 X7R (EIA) 0.15F 10% 3.2 2.5 1.5 1.2 0.3 min. GRM43QR72E154KW01L DC250 X7R (EIA) 0.15F 10% 4.5 3.2 1.5 2.2 0.3 min. GRM32DR72E224KW01L DC250 X7R (EIA) 0.22F 10% 3.2 2.5 2.0 1.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance Length L Width W Thickness T (mm) (mm) (mm) GRM188R72E221KW07D DC250 X7R (EIA) 220pF 10% 1.6 0.8 GRM188R72E331KW07D DC250 X7R (EIA) 330pF 10% 1.6 0.8 GRM188R72E471KW07D DC250 X7R (EIA) 470pF 10% 1.6 GRM188R72E681KW07D DC250 X7R (EIA) 680pF 10% 1.6 GRM188R72E102KW07D DC250 X7R (EIA) 1000pF 10% GRM21AR72E102KW01D DC250 X7R (EIA) 1000pF 10% GRM188R72E152KW07D DC250 X7R (EIA) GRM21AR72E152KW01D DC250 GRM188R72E222KW07D DC250 GRM21AR72E222KW01D GRM21AR72E332KW01D Continued on the following page. 166 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 0.3 min. 2.2 0.3 min. 5.0 2.0 3.2 0.3 min. 4.5 3.2 2.0 2.2 0.3 min. 0.47F 10% 5.7 5.0 2.0 3.2 0.3 min. 1.0F 10% 5.7 5.0 2.0 3.2 0.3 min. X7R (EIA) 1000pF 10% 3.2 1.6 1.25 1.2 0.3 min. DC630 X7R (EIA) 1500pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72J222KW01L DC630 X7R (EIA) 2200pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72J332KW01L DC630 X7R (EIA) 3300pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72J472KW01L DC630 X7R (EIA) 4700pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72J682KW01L DC630 X7R (EIA) 6800pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR72J103KW01L DC630 X7R (EIA) 10000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31CR72J153KW03L DC630 X7R (EIA) 15000pF 10% 3.2 1.6 1.6 1.2 0.3 min. GRM32QR72J223KW01L DC630 X7R (EIA) 22000pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRM32DR72J333KW01L DC630 X7R (EIA) 33000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRM32DR72J473KW01L DC630 X7R (EIA) 47000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRM43QR72J683KW01L DC630 X7R (EIA) 68000pF 10% 4.5 3.2 1.5 2.2 0.3 min. GRM43DR72J104KW01L DC630 X7R (EIA) 0.10F 10% 4.5 3.2 2.0 2.2 0.3 min. GRM55DR72J154KW01L DC630 X7R (EIA) 0.15F 10% 5.7 5.0 2.0 3.2 0.3 min. GRM55DR72J224KW01L DC630 X7R (EIA) 0.22F 10% 5.7 5.0 2.0 3.2 0.3 min. GRM31BR73A471KW01L DC1000 X7R (EIA) 470pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR73A102KW01L DC1000 X7R (EIA) 1000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR73A152KW01L DC1000 X7R (EIA) 1500pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR73A222KW01L DC1000 X7R (EIA) 2200pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR73A332KW01L DC1000 X7R (EIA) 3300pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM31BR73A472KW01L DC1000 X7R (EIA) 4700pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRM32QR73A682KW01L DC1000 X7R (EIA) 6800pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRM32QR73A103KW01L DC1000 X7R (EIA) 10000pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRM32DR73A153KW01L DC1000 X7R (EIA) 15000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRM32DR73A223KW01L DC1000 X7R (EIA) 22000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRM43DR73A333KW01L DC1000 X7R (EIA) 33000pF 10% 4.5 3.2 2.0 2.2 0.3 min. GRM43DR73A473KW01L DC1000 X7R (EIA) 47000pF 10% 4.5 3.2 2.0 2.2 0.3 min. GRM55DR73A104KW01L DC1000 X7R (EIA) 0.10F 10% 5.7 5.0 2.0 3.2 0.3 min. Length L Width W Thickness T (mm) (mm) (mm) GRM43DR72E224KW01L DC250 X7R (EIA) 0.22F 10% 4.5 3.2 GRM43DR72E334KW01L DC250 X7R (EIA) 0.33F 10% 4.5 3.2 GRM55DR72E334KW01L DC250 X7R (EIA) 0.33F 10% 5.7 GRM43DR72E474KW01L DC250 X7R (EIA) 0.47F 10% GRM55DR72E474KW01L DC250 X7R (EIA) GRM55DR72E105KW01L DC250 X7R (EIA) GRM31BR72J102KW01L DC630 GRM31BR72J152KW01L 167 Only for Applications 2.2 2.0 Capacitance AC250V Type GA2 Series 2.0 TC Code (Standard) Safety Standard Certified GA3 Series Electrode e (mm) Rated Voltage (V) Product Information Electrode g min. (mm) Part Number For General Purpose GRM/GRJ Series Continued from the preceding page. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Medium Voltage High Capacitance for General GRM Series Specifications and Test MethodsUse Specifications and Test Methods No. Item 1 Operating Temperature Range -55 to +125C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers Test Method - 4 Dielectric Strength No defects or abnormalities No failure should be observed when 150% of the rated voltage (200% of the rated voltage in case of rated voltage: DC250V, 120% of the rated voltage in case of rated voltage: DC1kV) is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 5 Insulation Resistance (I.R.) CU0.01F: More than 100M * F CF0.01F: More than 10,000M The insulation resistance should be measured with DC50050V (DC25025V in case of rated voltage: DC250V) and within 605 sec. of charging. 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. The capacitance/D.F. should be measured at a frequency of 10.2kHz and a voltage of AC10.2V(r.m.s.) The capacitance measurement should be made at each step specified in the Table. Safety Standard Certified GA3 Series 8 Product Information Specifications Capacitance Temperature Characteristics Cap. Change Within 15% (Temp. Range: -55 to +125C) Step 1 2 3 4 5 Temperature (C) 252 Min. Operating Temp.3 252 Max. Operating Temp.2 252 *Pretreatment Perform a heat treatment at 150+0 -10C for 605 min. and then let sit for 242 hrs. at room condition.* 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N (5N : Size 1.6g0.8mm only), 10T1s Glass Epoxy Board Fig. 1 Appearance No defects or abnormalities Capacitance Within the specified tolerance 10 Vibration Resistance D.F. Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 0.025 max. Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 168 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Continued from the preceding page. Specifications Test Method 4.5 c 40 d Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. a 100 11 Deflection Fig. 2 LZW (mm) 1.6Z0.8 2.0Z1.25 3.2Z1.6 3.2Z2.5 4.5Z3.2 5.7Z5.0 12 20 50 Pressurizing speed: 1.0mm/s Pressurize t : 1.6 Solderability of Termination a 1.0 1.2 2.2 2.2 3.5 4.5 Dimension (mm) b c 3.0 1.2 4.0 1.65 5.0 2.0 5.0 2.9 7.0 3.7 8.0 5.6 Capacitance Within 10% Change D.F. Resistance 13 to Soldering I.R. Heat 0.025 max. CU0.01F: More than 100M * F CF0.01F: More than 10,000M Flexure=1 d Capacitance meter 45 45 (in mm) 1.0 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects R230 Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 20.5 sec. Immersing speed: 252.5mm/s Temp. of solder: 2455C Lead Free Solder (Sn-3.0Ag-0.5Cu) 2355C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150C* for 1 min. Immerse the capacitor in solder solution at 2605C for 101 sec. Let sit at room condition* for 242 hrs., then measure. *Immersing speed: 252.5mm/s *Pretreatment 0 Perform a heat treatment at 150+ -10C for 605 min. and then let sit for 242 hrs. at room condition.* *Preheating for more than 3.2Z2.5mm Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Within 7.5% Change 14 D.F. 0.025 max. I.R. CU0.01F: More than 100M * F CF0.01F: More than 10,000M Temperature Cycle Step 1 2 Temperature 100 to 120C 170 to 200C Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 242 hrs. at room condition,* then measure. Step 1 2 3 4 Temperature (C) Min. Operating Temp.3 Room Temp. Max. Operating Temp.2 Room Temp. Time (min.) 303 2 to 3 303 2 to 3 *Pretreatment 0 Perform a heat treatment at 150+ -10C for 605 min. and then let sit for 242 hrs. at room condition.* Dielectric Strength In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 Appearance No marking defects Capacitance Within 15% Change Humidity 15 (Steady State) D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Let the capacitor sit at 402C and relative humidity of 90 to 95% for 500+24 - 0hrs. Remove and let sit for 242 hrs. at room condition,* then measure. *Pretreatment 0 Perform a heat treatment at 150+ -10C for 605 min. and then let sit for 242 hrs. at room condition.* * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 169 AC250V Type GA2 Series b Safety Standard Certified GA3 Series No marking defects Product Information Item [ X W (c) V R Q , T S _(c)X\UY|Z^(R)]|UQ, No. Only for Applications Medium Voltage High Capacitance forGRM General Use Specifications Specifications and Series andTest TestMethods Methods For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Medium Voltage High Capacitance for General GRM Series Specifications and Test MethodsUse Specifications and Test Methods Continued from the preceding page. No. Item Specifications Appearance No marking defects Capacitance Within 15% (rated voltage: DC250V, DC630V) Change Within 20% (rated voltage: DC1kV) 16 Life D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Test Method Apply 120% of the rated voltage (150% of the rated voltage in case of rated voltage: DC250V, 110% of the rated voltage in case +48 of rated voltage: DC1kV) for 1,000- 0hrs. at maximum operating temperature 3C. Remove and let sit for 242hrs. at room condition,* then measure. The charge/discharge current is less than 50mA. *Pretreatment Apply test voltage for 605 min. at test temperature. Remove and let sit for 242 hrs. at room condition.* Appearance No marking defects Humidity Loading (Application: 17 DC250V, DC630V item) Capacitance Within 15% Change D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Apply the rated voltage at 402C and relative humidity of 90 to +24 95% for 500- 0hrs. Remove and let sit for 242 hrs. at room condition,* then measure. *Pretreatment Apply test voltage for 605 min. at test temperature. Remove and let sit for 242 hrs. at room condition.* * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 170 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. e g e Features T 1. Improves endurance against Board Bending Stress. 2. Reduces the board bending stress by the conductive polymer termination. 3. Use the GRJ21/31 types with flow or reflow soldering, and other types with reflow soldering only. L Part Number GRJ21A GRJ21B GRJ31B GRJ31C GRJ32Q GRJ32D GRJ43Q GRJ43D GRJ55D Applications 3.2 0.2 3.2 0.3 4.5 0.4 5.7 0.4 g min. 0.7 1.2 2.2 3.2 Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Electrode g min. (mm) Electrode e (mm) 1.0 0.7 0.3 min. 1.0 0.7 0.3 min. 1.25 1.0 0.7 0.3 min. 2.0 1.25 1.0 0.7 0.3 min. 4700pF 10% 2.0 1.25 1.0 0.7 0.3 min. X7R (EIA) 6800pF 10% 2.0 1.25 1.0 0.7 0.3 min. DC250 X7R (EIA) 10000pF 10% 2.0 1.25 1.25 0.7 0.3 min. DC250 X7R (EIA) 15000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR72E223KWJ1L DC250 X7R (EIA) 22000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31CR72E333KWJ3L DC250 X7R (EIA) 33000pF 10% 3.2 1.6 1.6 1.2 0.3 min. GRJ31CR72E473KWJ3L DC250 X7R (EIA) 47000pF 10% 3.2 1.6 1.6 1.2 0.3 min. GRJ31BR72E683KWJ1L DC250 X7R (EIA) 68000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ32QR72E683KWJ1L DC250 X7R (EIA) 68000pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRJ31CR72E104KWJ3L DC250 X7R (EIA) 0.10F 10% 3.2 1.6 1.6 1.2 0.3 min. GRJ32DR72E104KWJ1L DC250 X7R (EIA) 0.10F 10% 3.2 2.5 2.0 1.2 0.3 min. GRJ32QR72E154KWJ1L DC250 X7R (EIA) 0.15F 10% 3.2 2.5 1.5 1.2 0.3 min. GRJ43QR72E154KWJ1L DC250 X7R (EIA) 0.15F 10% 4.5 3.2 1.5 2.2 0.3 min. GRJ32DR72E224KWJ1L DC250 X7R (EIA) 0.22F 10% 3.2 2.5 2.0 1.2 0.3 min. GRJ43DR72E224KWJ1L DC250 X7R (EIA) 0.22F 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ43DR72E334KWJ1L DC250 X7R (EIA) 0.33F 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ55DR72E334KWJ1L DC250 X7R (EIA) 0.33F 10% 5.7 5.0 2.0 3.2 0.3 min. GRJ43DR72E474KWJ1L DC250 X7R (EIA) 0.47F 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ55DR72E474KWJ1L DC250 X7R (EIA) 0.47F 10% 5.7 5.0 2.0 3.2 0.3 min. GRJ55DR72E105KWJ1L DC250 X7R (EIA) 1.0F 10% 5.7 5.0 2.0 3.2 0.3 min. GRJ31BR72J102KWJ1L DC630 X7R (EIA) 1000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR72J152KWJ1L DC630 X7R (EIA) 1500pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR72J222KWJ1L DC630 X7R (EIA) 2200pF 10% 3.2 1.6 1.25 1.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance Length L Width W Thickness T (mm) (mm) (mm) GRJ21AR72E102KWJ1D DC250 X7R (EIA) 1000pF 10% 2.0 1.25 GRJ21AR72E152KWJ1D DC250 X7R (EIA) 1500pF 10% 2.0 1.25 GRJ21AR72E222KWJ1D DC250 X7R (EIA) 2200pF 10% 2.0 GRJ21AR72E332KWJ1D DC250 X7R (EIA) 3300pF 10% GRJ21AR72E472KWJ1D DC250 X7R (EIA) GRJ21AR72E682KWJ1D DC250 GRJ21BR72E103KWJ3L GRJ31BR72E153KWJ1L Continued on the following page. 171 Product Information Safety Standard Certified GA3 Series 1. Ideal for use on diode-snubber circuits for switching power supplies. 2. Ideal for use as primary-secondary coupling for DC-DC converters. 3. Ideal for use on line filters and ringer detectors for telephones, facsimiles and modems. L 2.0 0.2 W Dimensions (mm) e W T 1.0 +0,-0.3 1.25 0.2 1.25 0.2 1.25 +0,-0.3 1.6 0.2 1.6 0.2 1.5 +0,-0.3 0.3 min. 2.5 0.2 2.0 +0,-0.3 1.5 +0,-0.3 3.2 0.3 2.0 +0,-0.3 2.0 +0,-0.3 5.0 0.4 AC250V Type GA2 Series Soft Termination Type GRJ series Only for Applications For General Purpose GRM/GRJ Series Chip Monolithic Ceramic Capacitors (Medium Voltage) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Electrode g min. (mm) Electrode e (mm) 1.25 1.2 0.3 min. 1.25 1.2 0.3 min. 1.6 1.25 1.2 0.3 min. 3.2 1.6 1.25 1.2 0.3 min. 15000pF 10% 3.2 1.6 1.6 1.2 0.3 min. 22000pF 10% 3.2 2.5 1.5 1.2 0.3 min. X7R (EIA) 33000pF 10% 3.2 2.5 2.0 1.2 0.3 min. DC630 X7R (EIA) 47000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRJ43QR72J683KWJ1L DC630 X7R (EIA) 68000pF 10% 4.5 3.2 1.5 2.2 0.3 min. GRJ43DR72J104KWJ1L DC630 X7R (EIA) 0.10F 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ55DR72J154KWJ1L DC630 X7R (EIA) 0.15F 10% 5.7 5.0 2.0 3.2 0.3 min. GRJ55DR72J224KWJ1L DC630 X7R (EIA) 0.22F 10% 5.7 5.0 2.0 3.2 0.3 min. GRJ31BR73A471KWJ1L DC1000 X7R (EIA) 470pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR73A102KWJ1L DC1000 X7R (EIA) 1000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR73A152KWJ1L DC1000 X7R (EIA) 1500pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR73A222KWJ1L DC1000 X7R (EIA) 2200pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR73A332KWJ1L DC1000 X7R (EIA) 3300pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR73A472KWJ1L DC1000 X7R (EIA) 4700pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ32QR73A682KWJ1L DC1000 X7R (EIA) 6800pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRJ32QR73A103KWJ1L DC1000 X7R (EIA) 10000pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRJ32DR73A153KWJ1L DC1000 X7R (EIA) 15000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRJ32DR73A223KWJ1L DC1000 X7R (EIA) 22000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRJ43DR73A333KWJ1L DC1000 X7R (EIA) 33000pF 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ43DR73A473KWJ1L DC1000 X7R (EIA) 47000pF 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ55DR73A104KWJ1L DC1000 X7R (EIA) 0.10F 10% 5.7 5.0 2.0 3.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance GRJ31BR72J332KWJ1L DC630 X7R (EIA) 3300pF 10% 3.2 1.6 GRJ31BR72J472KWJ1L DC630 X7R (EIA) 4700pF 10% 3.2 1.6 GRJ31BR72J682KWJ1L DC630 X7R (EIA) 6800pF 10% 3.2 GRJ31BR72J103KWJ1L DC630 X7R (EIA) 10000pF 10% GRJ31CR72J153KWJ3L DC630 X7R (EIA) GRJ32QR72J223KWJ1L DC630 X7R (EIA) GRJ32DR72J333KWJ1L DC630 GRJ32DR72J473KWJ1L Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series Continued from the preceding page. 172 Length L Width W Thickness T (mm) (mm) (mm) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Test Method 1 Operating Temperature Range -55 to +125C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers - No failure should be observed when voltage in the Table is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 4 Dielectric Strength No defects or abnormalities 5 Insulation Resistance (I.R.) CU0.01F: More than 100M * F CF0.01F: More than 10,000M 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. Rated Voltage DC250V DC630V DC1kV Test Voltage 200% of the rated voltage 150% of the rated voltage 120% of the rated voltage The insulation resistance should be measured with DC50050V (DC25025V in case of rated voltage: DC250V) and within 605 sec. of charging. The capacitance/D.F. should be measured at a frequency of 10.2kHz and a voltage of AC10.2V(r.m.s.) The capacitance measurement should be made at each step specified in the Table. 8 Capacitance Temperature Characteristics Cap. Change Within 15% (Temp. Range: -55 to +125C) Step 1 2 3 4 5 Temperature (C) 252 Min. Operating Temp.3 252 Max. Operating Temp.2 252 *Pretreatment Perform a heat treatment at 150+0 -10C for 605 min. and then let sit for 242 hrs. at room condition.* 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 Appearance No defects or abnormalities Capacitance Within the specified tolerance 10 Vibration Resistance D.F. Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 0.025 max. Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 173 Only for Applications Specifications AC250V Type GA2 Series Item Safety Standard Certified GA3 Series No. Product Information Medium Voltage Soft Termination TypeGRJ GRJSeries SeriesSpecifications Specifications and and Test TestMethods Methods For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Medium Voltage Soft Termination Type GRJ Series Specifications and Test Methods GRJ Series Specifications and Test Methods Continued from the preceding page. No. Item Specifications Appearance No marking defects Capacitance Within 12.5% Change b 4.5 TQ,T|ZRSUVWX(c) SWX(c)TZ^_[\(R)](R)]YZ Only for Applications Test Method d 20 50 Pressurizing speed: 1.0mm/s Pressurize 40 c a 11 Deflection 100 R230 t : 1.6 Fig. 2 AC250V Type GA2 Series LZW (mm) 2.0Z1.25 3.2Z1.6 3.2Z2.5 4.5Z3.2 5.7Z5.0 12 Safety Standard Certified GA3 Series Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. Solderability of Termination a 1.2 2.2 2.2 3.5 4.5 Dimension (mm) b c 4.0 1.65 5.0 2.0 5.0 2.9 7.0 3.7 8.0 5.6 Capacitance Within 10% Change D.F. Resistance 13 to Soldering I.R. Heat 0.025 max. CU0.01F: More than 100M * F CF0.01F: More than 10,000M Capacitance meter d 45 45 (in mm) Fig. 3 1.0 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Flexure=3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 20.5 sec. Immersing speed: 252.5mm/s Temp. of solder: 2455C Lead Free Solder (Sn-3.0Ag-0.5Cu) 2355C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150C* for 1 min. Immerse the capacitor in solder solution at 2605C for 101 sec. Let sit at room condition* for 242 hrs., then measure. *Immersing speed: 252.5mm/s *Pretreatment 0 Perform a heat treatment at 150+ -10C for 605 min. and then let sit for 242 hrs. at room condition.* Product Information *Preheating for more than 3.2Z2.5mm Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Within 7.5% Change 14 D.F. 0.025 max. I.R. CU0.01F: More than 100M * F CF0.01F: More than 10,000M Temperature Cycle Step 1 2 Temperature 100 to 120C 170 to 200C Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 242 hrs. at room condition,* then measure. Step 1 2 3 4 Temperature (C) Min. Operating Temp.3 Room Temp. Max. Operating Temp.2 Room Temp. Time (min.) 303 2 to 3 303 2 to 3 *Pretreatment 0 Perform a heat treatment at 150+ -10C for 605 min. and then let sit for 242 hrs. at room condition.* Dielectric Strength In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 Appearance No marking defects Capacitance Within 15% Change Humidity 15 (Steady State) D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Let the capacitor sit at 402C and relative humidity of 90 to 95% for 500+24 - 0hrs. Remove and let sit for 242 hrs. at room condition,* then measure. *Pretreatment 0 Perform a heat treatment at 150+ -10C for 605 min. and then let sit for 242 hrs. at room condition.* * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 174 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Medium Voltage Soft Termination TypeGRJ GRJSeries SeriesSpecifications Specifications and and Test TestMethods Methods Continued from the preceding page. Specifications Appearance No marking defects Capacitance Within 15% (rated voltage: DC250V, DC630V) Change Within 20% (rated voltage: DC1kV) D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M 16 Life Dielectric Strength In accordance with item No.4 Test Method Apply voltage as in Table for 1,000+48 - 0hrs. at maximum operating temperature 3C. Remove and let sit for 242 hrs. at room condition,* then measure. Rated Voltage DC250V DC630V DC1kV Applied Voltage 150% of the rated voltage 120% of the rated voltage 110% of the rated voltage Only for Applications Item The charge/discharge current is less than 50mA. *Pretreatment Apply test voltage for 605 min. at test temperature. Remove and let sit for 242 hrs. at room condition.* Appearance No marking defects Humidity Loading (Application: 17 DC250V, DC630V item) Capacitance Within 15% Change D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Apply the rated voltage at 402C and relative humidity of 90 to +24 95% for 500- 0hrs. Remove and let sit for 242 hrs. at room condition,* then measure. *Pretreatment Apply test voltage for 605 min. at test temperature. Remove and let sit for 242 hrs. at room condition.* AC250V Type GA2 Series No. For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Product Information Safety Standard Certified GA3 Series * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 175 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Chip Monolithic Ceramic Capacitors (Medium Voltage) For LCD Backlight Inverter Circuit GRM/DC3.15kV Series Features e 1. Low-loss and suitable for high frequency circuits 2. Murata's original internal electrode structure realizes high flash-over voltage. 3. A new monolithic structure for small, surfacemountable devices capable of operating at high voltage levels. 4. Sn-plated external electrodes realize good solderability. 5. Only for reflow soldering 6. Capacitance values less than 22pF can be used in LCD backlight inverter circuits as long as the applied voltage, peak to peak, is less than 4.0kV at 100kHz or less. g e T Only for Applications GRM/DC3.15kV Series For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. L Part Number GRM42A L 4.5 0.3 W Dimensions (mm) W T e min. 2.0 0.2 1.0 +0, - 0.3 0.3 g min. 2.9 Applications Ideal for use as the ballast in LCD backlight inverter. Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Electrode g min. (mm) Electrode e (mm) 1.0 2.9 0.3 min. 1.0 2.9 0.3 min. 2.0 1.0 2.9 0.3 min. 4.5 2.0 1.0 2.9 0.3 min. 4.5 2.0 1.0 2.9 0.3 min. 22 5% 4.5 2.0 1.0 2.9 0.3 min. C0G (EIA) 27 5% 4.5 2.0 1.0 2.9 0.3 min. DC3150 C0G (EIA) 33 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A5C3F390JW01L DC3150 C0G (EIA) 39 5% 4.5 2.0 1.0 2.9 0.3 min. GRM42A5C3F470JW01L DC3150 C0G (EIA) 47 5% 4.5 2.0 1.0 2.9 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) GRM42A5C3F050DW01L DC3150 C0G (EIA) 5.0 0.5pF 4.5 2.0 GRM42A5C3F100JW01L DC3150 C0G (EIA) 10 5% 4.5 2.0 GRM42A5C3F120JW01L DC3150 C0G (EIA) 12 5% 4.5 GRM42A5C3F150JW01L DC3150 C0G (EIA) 15 5% GRM42A5C3F180JW01L DC3150 C0G (EIA) 18 5% GRM42A5C3F220JW01L DC3150 C0G (EIA) GRM42A5C3F270JW01L DC3150 GRM42A5C3F330JW01L 176 Length L Width W Thickness T (mm) (mm) (mm) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Specifications Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimension Using calipers and micrometers 4 Dielectric Strength No defects or abnormalities No failure should be observed when DC4095V is applied between the terminations for 1 to 5 sec., provided the charge/ discharge current is less than 50mA. 5 Insulation Resistance (I.R.) More than 10,000M The insulation resistance should be measured with DC500T50V and within 60T5 sec. of charging. 6 Capacitance Within the specified tolerance 7 Q 1,000 min. Y The capacitance/Q should be measured at a frequency of 1T0.2MHz and a voltage of AC0.5 to 5V(r.m.s.) The capacitance measurement should be made at each step specified in the Table. 8 9 Capacitance Temperature Characteristics Adhesive Strength of Termination Step 1 2 3 4 5 Temp. Coefficient 0T30ppm/D (Temp. Range: W25 to W125D) 0W30, Y72ppm/D (Temp. Range: Y55 to W25D) No removal of the terminations or other defect should occur. Temperature (D) 25T2 Min. Operating Temp.T3 25T2 Max. Operating Temp.T2 25T2 Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Only for Applications GRM/DC3.15kV Series Item AC250V Type GA2 Series No. Safety Standard Certified GA3 Series Only for LCD Backlight Inverter Circuit Specifications and Test and Methods GRM/DC3.15kV Series Specifications Test Methods For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Fig. 1 10 Appearance No defects or abnormalities Capacitance Within the specified tolerance Q 1,000 min. Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Vibration Resistance Solder resist Cu Glass Epoxy Board W _ \ [ (c) X T S Z V Y](R)Z^|YURSVQ,Z No marking defects b 4.5 40 d c Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 20 50 Pressurizing speed: 1.0mm/s Pressurize a 11 Deflection 100 t : 1.6 Fig. 2 LZW (mm) 4.5Z2.0 a 3.5 Dimension (mm) b c 7.0 2.4 d 1.0 R230 Flexure=1 Capacitance meter 45 45 (in mm) Fig. 3 Continued on the following page. 177 Product Information Glass Epoxy Board PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Only for LCD Backlight Inverter Circuit Specifications and Test Methods GRM/DC3.15kV Series Specifications and Test Methods Continued from the preceding page. No. 12 Item Solderability of Termination Safety Standard Certified GA3 Series 14 Specifications 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance Change Within T2.5% Resistance Q 13 to Soldering I.R. Heat AC250V Type GA2 Series Only for Applications GRM/DC3.15kV Series For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Test Method Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder Preheat the capacitor as in table. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition* for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s 1,000 min. More than 10,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T2.5% Q 1,000 min. I.R. More than 10,000M Dielectric Strength In accordance with item No.4 Temperature Cycle *Preheating Step 1 2 Temperature 100 to 120D 170 to 200D Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition,* then measure. Step 1 2 3 4 Temperature (D) Min. Operating Temp.T3 Room Temp. Max. Operating Temp.T2 Room Temp. Time (min.) 30T3 2 to 3 30T3 2 to 3 Solder resist Cu Glass Epoxy Board Product Information Fig. 4 Appearance Capacitance Change Humidity 15 (Steady Q State) I.R. 16 Life No marking defects Within T5.0% 350 min. More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T3.0% Q 350 min. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Let the capacitor sit at 40T2D and relative humidity of 90 to 95% for 500W24 Y 0hrs. Remove and let sit for 24T2 hrs. at room condition,* then measure. Apply 120% of the rated voltage for 1,000W48 Y 0 hrs. at maximum operating temperature T3D. Remove and let sit for 24T2 hrs. at room condition,* then measure. The charge/discharge current is less than 50mA. * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 178 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For Information Devices GR4 Series g e T 1. These items are designed specifically for telecommunications devices (IEEE802.3) in Ethernet LAN and primary-secondary coupling for DC-DC converters. 2. A new monolithic structure for small, high capacitance capable of operating at high voltage levels 3. Sn-plated external electrodes realize good solderability. 4. Only for reflow soldering L Part Number GR442Q GR443D GR443Q GR455D L 4.5 0.3 4.5 0.4 5.7 0.4 W Dimensions (mm) W T 2.0 0.2 1.5 +0, -0.3 2.0 +0, -0.3 3.2 0.3 1.5 +0, -0.3 5.0 0.4 2.0 +0, -0.3 e min. g min. 0.3 2.5 3.2 Applications Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Electrode g min. (mm) Electrode e (mm) 1.5 2.5 0.3 min. 1.5 2.5 0.3 min. 2.0 1.5 2.5 0.3 min. 4.5 2.0 1.5 2.5 0.3 min. 220 10% 4.5 2.0 1.5 2.5 0.3 min. 270 10% 4.5 2.0 1.5 2.5 0.3 min. X7R (EIA) 330 10% 4.5 2.0 1.5 2.5 0.3 min. DC2000 X7R (EIA) 390 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D471KW01L DC2000 X7R (EIA) 470 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D561KW01L DC2000 X7R (EIA) 560 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D681KW01L DC2000 X7R (EIA) 680 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D821KW01L DC2000 X7R (EIA) 820 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D102KW01L DC2000 X7R (EIA) 1000 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D122KW01L DC2000 X7R (EIA) 1200 10% 4.5 2.0 1.5 2.5 0.3 min. GR442QR73D152KW01L DC2000 X7R (EIA) 1500 10% 4.5 2.0 1.5 2.5 0.3 min. GR443QR73D182KW01L DC2000 X7R (EIA) 1800 10% 4.5 3.2 1.5 2.5 0.3 min. GR443QR73D222KW01L DC2000 X7R (EIA) 2200 10% 4.5 3.2 1.5 2.5 0.3 min. GR443QR73D272KW01L DC2000 X7R (EIA) 2700 10% 4.5 3.2 1.5 2.5 0.3 min. GR443QR73D332KW01L DC2000 X7R (EIA) 3300 10% 4.5 3.2 1.5 2.5 0.3 min. GR443QR73D392KW01L DC2000 X7R (EIA) 3900 10% 4.5 3.2 1.5 2.5 0.3 min. GR443DR73D472KW01L DC2000 X7R (EIA) 4700 10% 4.5 3.2 2.0 2.5 0.3 min. GR455DR73D103KW01L DC2000 X7R (EIA) 10000 10% 5.7 5.0 2.0 3.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GR442QR73D101KW01L DC2000 X7R (EIA) 100 10% 4.5 2.0 GR442QR73D121KW01L DC2000 X7R (EIA) 120 10% 4.5 2.0 GR442QR73D151KW01L DC2000 X7R (EIA) 150 10% 4.5 GR442QR73D181KW01L DC2000 X7R (EIA) 180 10% GR442QR73D221KW01L DC2000 X7R (EIA) GR442QR73D271KW01L DC2000 X7R (EIA) GR442QR73D331KW01L DC2000 GR442QR73D391KW01L 179 Product Information Safety Standard Certified GA3 Series 1. Ideal for use on telecommunications devices in Ethernet LAN 2. Ideal for use as primary-secondary coupling for DC-DC converters AC250V Type GA2 Series e Features Only for Applications GR4 Series For General Purpose GRM/GRJ Series Chip Monolithic Ceramic Capacitors (Medium Voltage) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications GR4 Series For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Only Series for Information Devices GR4 Specifications andSpecifications Test Methodsand Test Methods No. Item Specifications Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers Y No failure should be observed when voltage in the table is applied between the terminations, provided the charge/discharge current is less than 50mA. 4 Dielectric Strength No defects or abnormalities Rated Voltage Test Voltage 120% of the rated voltage AC1500V(r.m.s.) DC2kV Time 60T1 sec. 60T1 sec. 5 Pulse Voltage No self healing breakdowns or flash-overs have taken place in the capacitor. 10 impulses of alternating polarity are subjected. (5 impulses for each polarity) The interval between impulses is 60 sec. Applied Pulse: 1.2/50s Applied Voltage: 2.5kVo-p 6 Insulation Resistance (I.R.) More than 6,000M The insulation resistance should be measured with DC500T50V and within 60T5 sec. of charging. 7 Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) 0.025 max. The capacitance/D.F. should be measured at a frequency of 1T0.2kHz and a voltage of AC1T0.2V(r.m.s.) The capacitance measurement should be made at each step specified in the Table. 9 Capacitance Temperature Characteristics Cap. Change within T15% (Temp. Range: Y55 to W125D) Step 1 2 3 4 5 Temperature (D) 25T2 Min. Operating Temp.T3 25T2 Max. Operating Temp.T2 25T2 #Pretreatment Perform a heat treatment at 150W0 Y10D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* 10 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 11 Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. 0.025 max. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 180 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Continued from the preceding page. Specifications Test Method 4.5 40 d c Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 20 50 Pressurizing speed: 1.0mm/s Pressurize a 12 Deflection 100 t : 1.6 R230 Fig. 2 LZW (mm) 4.5Z2.0 4.5Z3.2 5.7Z5.0 13 Solderability of Termination Dimension (mm) b c 7.0 2.4 7.0 3.7 8.0 5.6 No marking defects Capacitance Change Within T10% 0.025 max. More than 1,000M Flexure=1 d Capacitance meter 45 1.0 75% of the terminations are to be soldered evenly and continuously. Appearance D.F. Resistance I.R. 14 to Soldering Heat a 3.5 3.5 4.5 (in mm) 45 Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder Preheat the capacitor as in table. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition* for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s #Pretreatment 0 Perform a heat treatment at 150W Y10D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* *Preheating 15 Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. More than 3,000M Temperature Cycle Dielectric Strength Step 1 2 Temperature 100 to 120D 170 to 200D Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition,* then measure. Step 1 2 3 4 Temperature (D) Min. Operating Temp.T3 Room Temp. Max. Operating Temp.T2 Room Temp. Time (min.) 30T3 2 to 3 30T3 2 to 3 #Pretreatment 0 Perform a heat treatment at 150W Y10D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 Appearance No marking defects Capacitance Change Within T15% Humidity 16 (Steady D.F. State) I.R. Dielectric Strength 0.05 max. More than 1,000M In accordance with item No.4 Let the capacitor sit at 40T2D and relative humidity of 90 to 95% for 500W24 Y 0 hrs. Remove and let sit for 24T2 hrs. at room condition,* then measure. #Pretreatment 0 Perform a heat treatment at 150W Y10D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 181 AC250V Type GA2 Series b Safety Standard Certified GA3 Series No marking defects Product Information Item (c) [ Z X W R | V U Q , T S \(c)X_Y]^(R)|UQ, No. Only for Applications GR4 Series Only for Information Devices Specifications and Specifications Test Methods and Test Methods GR4 Series For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Only Series for Information Devices GR4 Specifications andSpecifications Test Methodsand Test Methods Continued from the preceding page. No. 17 Life Item Specifications Appearance No marking defects Capacitance Change Within T20% D.F. 0.05 max. I.R. More than 2,000M Dielectric Strength In accordance with item No.4 Test Method Apply 110% of the rated voltage for 1,000W48 Y 0 hrs. at maximum operating temperature T3D. Remove and let sit for 24T2 hrs. at room condition,* then measure. The charge/discharge current is less than 50mA. #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications GR4 Series For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 182 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. e Features T 1. Suitable for the trigger of the flash circuit, because real capacitance is stable during operating voltage. 2. The thin type fits thinner cameras. 3. Sn-plated external electrodes realize good solderability. 4. For flow and reflow soldering L Part Number GR721A GR721B GR731A GR731B GR731C Applications L 2.0 0.2 3.2 0.2 For strobe circuit W Dimensions (mm) W T e min. g min. 1.0 +0, -0.3 1.25 0.2 0.7 1.25 0.2 1.0 +0, -0.3 0.3 1.6 0.2 1.25 +0, -0.3 1.2 1.6 0.2 Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Electrode g min. (mm) Electrode e (mm) 1.0 0.7 0.3 min. 1.0 1.2 0.3 min. 1.25 1.0 0.7 0.3 min. 3.2 1.6 1.0 1.2 0.3 min. 22000 10% 2.0 1.25 1.25 0.7 0.3 min. 22000 10% 3.2 1.6 1.0 1.2 0.3 min. - 22000 10% 3.2 1.6 1.25 1.2 0.3 min. DC350 - 27000 10% 2.0 1.25 1.25 0.7 0.3 min. GR731AW0BB273KW01D DC350 - 27000 10% 3.2 1.6 1.0 1.2 0.3 min. GR731AW0BB333KW01D DC350 - 33000 10% 3.2 1.6 1.0 1.2 0.3 min. GR731BW0BB333KW01L DC350 - 33000 10% 3.2 1.6 1.25 1.2 0.3 min. GR731CW0BB473KW03L DC350 - 47000 10% 3.2 1.6 1.6 1.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GR721AW0BB103KW01D DC350 - 10000 10% 2.0 1.25 GR731AW0BB103KW01D DC350 - 10000 10% 3.2 1.6 GR721AW0BB153KW01D DC350 - 15000 10% 2.0 GR731AW0BB153KW01D DC350 - 15000 10% GR721BW0BB223KW03L DC350 - GR731AW0BB223KW01D DC350 - GR731BW0BB223KW01L DC350 GR721BW0BB273KW03L 183 AC250V Type GA2 Series g Safety Standard Certified GA3 Series e Product Information For Camera Flash Circuit GR7 Series Only for Applications GR7 Series For General Purpose GRM/GRJ Series Chip Monolithic Ceramic Capacitors (Medium Voltage) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Only Series for Camera Flash Circuit GR7 Specifications andSpecifications Test Methods and Test Methods No. Item Specifications 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers 4 Dielectric Strength No defects or abnormalities No failure should be observed when DC500V is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 5 Insulation Resistance (I.R.) CU0.01F: More than 100M * F CF0.01F: More than 10,000M The insulation resistance should be measured with DC250T50V and within 60T5 sec. of charging. 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. Test Method Y The capacitance/D.F. should be measured at a frequency of 1T0.2kHz and a voltage of AC1T0.2V(r.m.s.) The capacitance measurement should be made at each step specified in the Table. 8 Capacitance Temperature Characteristics Cap. Change Within T10% (Apply DC350V bias) Within W22 Y33 % (No DC bias) (Temp. Range : Y55 to W125D) Step 1 2 3 4 5 Temperature (D) 25T2 Min. Operating Temp.T3 25T2 Max. Operating Temp.T2 25T2 #Pretreatment W0 Perform a heat treatment at 150Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications GR7 Series For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Adhesive Strength of Termination Product Information 9 No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 10 Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. 0.025 max. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 184 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Continued from the preceding page. Specifications Test Method 4.5 40 d c Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 20 50 Pressurizing speed: 1.0mm/s Pressurize a 11 Deflection 100 t : 1.6 R230 Fig. 2 LZW (mm) 2.0Z1.25 3.2Z1.6 12 Solderability of Termination 14 Dimension (mm) b c 4.0 1.65 5.0 2.0 No marking defects Capacitance Change Within T10% 0.025 max. CU0.01F: More than 100M * F CF0.01F: More than 10,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T7.5% D.F. 0.025 max. I.R. CU0.01F: More than 100M * F CF0.01F: More than 10,000M Temperature Cycle Flexure=1 Capacitance meter d 45 1.0 75% of the terminations are to be soldered evenly and continuously. Appearance Resistance D.F. 13 to Soldering Heat I.R. a 1.2 2.2 (in mm) 45 Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150D for 1 min. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition* for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s #Pretreatment 0 Perform a heat treatment at 150W Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition,* then measure. Step 1 2 3 4 Temperature (D) Min. Operating Temp.T3 Room Temp. Max. Operating Temp.T2 Room Temp. Time (min.) 30T3 2 to 3 30T3 2 to 3 #Pretreatment 0 Perform a heat treatment at 150W Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* Dielectric Strength In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 Humidity 15 (Steady State) Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Let the capacitor sit at 40T2D and relative humidity of 90 to 95% W24 for 500Y 0 hrs. Remove and let sit for 24T2 hrs. at room condition,* then measure. #Pretreatment 0 Perform a heat treatment at 150W Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 185 AC250V Type GA2 Series b Safety Standard Certified GA3 Series No marking defects Product Information Item \ (c) [ Z X W R | V U Q , T S X\(c)_]^(R)YQ,|U No. Only for Applications GR7 Series Only for Camera Flash Circuit Specifications andSpecifications Test Methods and Test Methods GR7 Series For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Only for Applications GR7 Series For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Only Series for Camera Flash Circuit GR7 Specifications andSpecifications Test Methods and Test Methods Continued from the preceding page. No. 16 Life 17 Humidity Loading Specifications Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Test Method Apply DC350V for 1,000W48 Y 0 hrs. at maximum operating temperature T3D. Remove and let sit for 24T2 hrs. at room condition,* then measure. The charge/discharge current is less than 50mA. #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition.* Apply the rated voltage at 40T2D and relative humidity of 90 to W24 95% for 500Y 0 hrs. Remove and let sit for 24T2 hrs. at room condition,* then measure. #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Item 186 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. AC250V Type (Which Meet Japanese Law) GA2 Series g e T 1. Chip monolithic ceramic capacitor for AC lines. 2. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 3. Sn-plated external electrodes realize good solderability. 4. Only for reflow soldering 5. Capacitance 0.01 to 0.1uF for connecting lines and 470 to 4700pF for connecting lines to earth. L Part Number GA242Q GA243D GA243Q GA255D L 4.5 0.3 4.5 0.4 5.7 0.4 W Dimensions (mm) W T e min. 2.0 0.2 1.5 +0, -0.3 2.0 +0, -0.3 3.2 0.3 0.3 1.5 +0, -0.3 5.0 0.4 2.0 +0, -0.3 g min. 2.5 3.2 Applications Noise suppression filters for switching power supplies, telephones, facsimiles, modems. Safety Standard Certified GA3 Series Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. AC250V Type GA2 Series e Features Only for Applications For General Purpose GRM/GRJ Series Chip Monolithic Ceramic Capacitors GA2 series obtains no safety approval. This series is based on the standards of the electrical appliance and material safety law of Japan (separated table 4). Electrode g min. (mm) Electrode e (mm) 1.5 2.5 0.3 min. 2.0 1.5 2.5 0.3 min. 3.2 1.5 2.5 0.3 min. 4.5 3.2 1.5 2.5 0.3 min. 4700pF 20% 4.5 3.2 2.0 2.5 0.3 min. X7R (EIA) 10000pF 20% 4.5 3.2 1.5 2.5 0.3 min. AC250 (r.m.s.) X7R (EIA) 22000pF 20% 4.5 3.2 1.5 2.5 0.3 min. AC250 (r.m.s.) X7R (EIA) 47000pF 20% 4.5 3.2 2.0 2.5 0.3 min. AC250 (r.m.s.) X7R (EIA) 0.10F 20% 5.7 5.0 2.0 3.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance Length L Width W Thickness T (mm) (mm) (mm) GA242QR7E2471MW01L AC250 (r.m.s.) X7R (EIA) 470pF 20% 4.5 2.0 GA242QR7E2102MW01L AC250 (r.m.s.) X7R (EIA) 1000pF 20% 4.5 GA243QR7E2222MW01L AC250 (r.m.s.) X7R (EIA) 2200pF 20% 4.5 GA243QR7E2332MW01L AC250 (r.m.s.) X7R (EIA) 3300pF 20% GA243DR7E2472MW01L AC250 (r.m.s.) X7R (EIA) GA243QR7E2103MW01L AC250 (r.m.s.) GA243QR7E2223MW01L GA243DR7E2473MW01L GA255DR7E2104MW01L 187 Product Information Reference Standard PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. AC250V(r.m.s.) Type (Whichand Meet Japanese Law) Specifications and Test Methods GA2 Series Specifications Test Methods No. Item Specifications Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers Y No failure should be observed when voltage in the table is applied between the terminations for 60T1 sec., provided the charge/discharge current is less than 50mA. 4 Dielectric Strength No defects or abnormalities 5 Insulation Resistance (I.R.) More than 2,000M 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. Nominal Capacitance CU10,000pF CF10,000pF Test Voltage AC575V (r.m.s.) AC1500V (r.m.s.) The insulation resistance should be measured with DC500T50V and within 60T5 sec. of charging. The capacitance/D.F. should be measured at a frequency of 1T0.2kHz and a voltage of AC1T0.2V (r.m.s.) The capacitance measurement should be made at each step specified in the Table. 8 Capacitance Temperature Characteristics Cap. Change Within T15% (Temp. Range: Y55 to W125D) Step 1 2 3 4 5 Temperature (D) 25T2 Min. Operating Temp.T3 25T2 Max. Operating Temp.T2 25T2 #Pretreatment 0 Perform a heat treatment at 150W Y10D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* As in Fig., discharge is made 50 times at 5 sec. intervals from the capacitor (Cd) charged at DC voltage of specified. 9 Discharge Test (Application: Nominal Capacitance CF10,000pF) R3 Appearance R1 No defects or abnormalities 10kV V Ct R2 Cd Ct: Capacitor under test Cd: 0.001F R1: 1,000 R2: 100M R3: Surge resistance 10 Adhesive Strength of Termination No removal of the terminations or other defects should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 11 Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. 0.025 max. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 188 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Continued from the preceding page. Specifications Test Method 4.5 40 d c Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. a 12 Deflection 100 20 50 Pressurizing speed: 1.0mm/s Pressurize t : 1.6 Fig. 2 LZW (mm) 4.5Z2.0 4.5Z3.2 5.7Z5.0 13 Solderability of Termination Humidity 14 Insulation No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T10% 0.025 max. More than 2,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. More than 2,000M Temperature Cycle Dielectric Strength Dimension (mm) b c 7.0 2.4 7.0 3.7 8.0 5.6 In accordance with item No.4 Flexure=1 d Capacitance meter 45 1.0 75% of the terminations are to be soldered evenly and continuously. Appearance D.F. Resistance 15 to Soldering I.R. Heat 16 a 3.5 3.5 4.5 R230 45 (in mm) Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder The capacitor should be subjected to 40T2D, relative humidity of 90 to 98% for 8 hrs., and then removed in room condition* for 16 hrs. until 5 cycles. Preheat the capacitor as in table. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition* for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s #Pretreatment 0 Perform a heat treatment at 150W Y10D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* *Preheating Step 1 2 Temperature 100 to 120D 170 to 200D Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition,* then measure. Step 1 2 3 4 Temperature (D) Min. Operating Temp.T3 Room Temp. Max. Operating Temp.T2 Room Temp. Time (min.) 30T3 2 to 3 30T3 2 to 3 #Pretreatment 0 Perform a heat treatment at 150W Y10D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* Solder resist Cu Glass Epoxy Board Fig. 4 * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 189 AC250V Type GA2 Series b Safety Standard Certified GA3 Series No marking defects Product Information Item (c) [ Z X W R | V U Q , T S X\(c)_Y]^(R)Q,U| No. Only for Applications AC250V(r.m.s.) Type (Which Meet Japanese Law) Specifications Specifications and Test Methods GA2 Series Methods For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. AC250V(r.m.s.) Type (Whichand Meet Japanese Law) Specifications and Test Methods GA2 Series Specifications Test Methods Continued from the preceding page. No. Item Humidity 17 (Steady State) Specifications Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T20% D.F. 0.05 max. I.R. More than 1,000M 18 Life 19 Humidity Loading Test Method Let the capacitor sit at 40T2D and relative humidity of 90 to 95% W24 for 500Y 0hrs. Remove and let sit for 24T2 hrs. at room condition,* then measure. #Pretreatment W 0 Perform a heat treatment at 150Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition.* Apply voltage and time as in Table at maximum operating temperature T3D. Remove and let sit for 24T2 hrs. at room condition,* then measure. The charge / discharge current is less than 50mA. Nominal Capacitance Test Time Test Voltage W48 CU10,000pF 1,000Y 0 hrs. AC300V (r.m.s.) W48 CF10,000pF 1,500Y 0 hrs. AC500V (r.m.s.) * * Except that once each hour the voltage is increased to AC1,000V (r.m.s.) for 0.1 sec. Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within T15% D.F. 0.05 max. I.R. More than 1,000M Dielectric Strength In accordance with item No.4 #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition.* Apply the rated voltage at 40T2D and relative humidity of 90 to W24 95% for 500Y 0hrs. Remove and let sit for 24T2 hrs. at room condition,* then measure. #Pretreatment Apply test voltage for 60T5 min. at test temperature. Remove and let sit for 24T2 hrs. at room condition.* Product Information * "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 190 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General Purpose GRM/GRJ Series Chip Monolithic Ceramic Capacitors Safety Standard Certified GA3 Series UL, IEC60384-14 Class X1/Y2 Type GC e T 1. Chip monolithic ceramic capacitor (certified as conforming to safety standards) for AC lines. 2. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 3. Compared to lead type capacitors, this new capacitor is greatly downsized and low-profiled to 1/10 or less in volume, and 1/4 or less in height. 4. Type GC can be used as an X1-class and Y2-class capacitor, line-by-pass capacitor of UL1414. 5. +125 degree C guaranteed 6. Only for reflow soldering g Only for Applications e Features L GA355D L 5.7 0.4 Dimensions (mm) W T e min. 5.0 0.4 2.0 0.3 0.3 g min. 4.0 AC250V Type GA2 Series Part Number W Standard Certification Applications Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Standard No. Class UL1414 Line By-pass VDE IEC 60384-14 EN 60384-14 BSI EN 60065 (14.2) IEC 60384-14 EN 60384-14 SEMKO IEC 60384-14 EN 60384-14 ESTI EN 60065 IEC 60384-14 Rated Voltage Safety Standard Certified GA3 Series UL AC250V (r.m.s.) X1, Y2 Electrode g min. (mm) Electrode e (mm) 2.0 4.0 0.3 min. 2.0 4.0 0.3 min. 5.0 2.0 4.0 0.3 min. 5.0 2.0 4.0 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GA355DR7GC101KY02L AC250 (r.m.s.) X7R (EIA) 100 10% 5.7 5.0 GA355DR7GC151KY02L AC250 (r.m.s.) X7R (EIA) 150 10% 5.7 5.0 GA355DR7GC221KY02L AC250 (r.m.s.) X7R (EIA) 220 10% 5.7 GA355DR7GC331KY02L AC250 (r.m.s.) X7R (EIA) 330 10% 5.7 191 Product Information 1. Ideal for use as Y capacitor or X capacitor for various switching power supplies 2. Ideal for modem applications PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Chip Monolithic Ceramic Capacitors Safety Standard Certified GA3 Series IEC60384-14 Class Y2, X1/Y2 Type GF e g e Features 1. Available for equipment based on IEC/EN60950 and UL1950. Besides, the GA352/355 types are available for equipment based on IEC/EN60065, UL1492, and UL6500. 2. Type GF can be used as a Y2-class capacitor. 3. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 4. +125 degree C guaranteed 5. Only for reflow soldering T Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. L Part Number GA342A GA342D GA342Q GA352Q GA355D GA355Q L W Dimensions (mm) T 1.0 +0, -0.3 2.0 0.2 2.0 0.2 1.5 +0, -0.3 2.8 0.3 1.5 +0, -0.3 2.0 +0, -0.3 5.0 0.4 1.5 +0, -0.3 W 4.5 0.3 5.7 0.4 e min. g min. 2.5 0.3 4.0 Standard Certification Applications 1. Ideal for use on line filters and couplings for DAA modems without transformers 2. Ideal for use on line filters for information equipment 3. Ideal for use as Y capacitor or X capacitor for various switching power supplies (GA352/355 types only) UL Status of Certification Standard No. Class UL1414 X1, Y2 UL 60950-1 Y Size : 4.5x2.0mm Rated Size : 5.7x2.8mm Voltage and over Y Y Y VDE IEC 60384-14 X1, Y2 SEMKO EN 60384-14 Y2 AC250V (r.m.s.) Applications Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Size Switching power supplies 4.5x2.0mm Y Communication network devices such as a modem 5.7x2.8mm and over Electrode g min. (mm) Electrode e (mm) 2.0 2.5 0.3 min. 2.0 2.0 2.5 0.3 min. 2.0 2.0 2.5 0.3 min. 4.5 2.0 2.0 2.5 0.3 min. 22 5% 4.5 2.0 2.0 2.5 0.3 min. SL (JIS) 27 5% 4.5 2.0 1.0 2.5 0.3 min. AC250 (r.m.s.) SL (JIS) 33 5% 4.5 2.0 1.0 2.5 0.3 min. AC250 (r.m.s.) SL (JIS) 39 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGF470JW31L AC250 (r.m.s.) SL (JIS) 47 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGF560JW31L AC250 (r.m.s.) SL (JIS) 56 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGF680JW31L AC250 (r.m.s.) SL (JIS) 68 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGF820JW31L AC250 (r.m.s.) SL (JIS) 82 5% 4.5 2.0 1.0 2.5 0.3 min. GA342QR7GF101KW01L AC250 (r.m.s.) X7R (EIA) 100 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GF151KW01L AC250 (r.m.s.) X7R (EIA) 150 10% 4.5 2.0 1.5 2.5 0.3 min. GA342DR7GF221KW02L AC250 (r.m.s.) X7R (EIA) 220 10% 4.5 2.0 2.0 2.5 0.3 min. GA342DR7GF331KW02L AC250 (r.m.s.) X7R (EIA) 330 10% 4.5 2.0 2.0 2.5 0.3 min. GA342QR7GF471KW01L AC250 (r.m.s.) X7R (EIA) 470 10% 4.5 2.0 1.5 2.5 0.3 min. GA352QR7GF471KW01L AC250 (r.m.s.) X7R (EIA) 470 10% 5.7 2.8 1.5 4.0 0.3 min. GA342QR7GF681KW01L AC250 (r.m.s.) X7R (EIA) 680 10% 4.5 2.0 1.5 2.5 0.3 min. GA352QR7GF681KW01L AC250 (r.m.s.) X7R (EIA) 680 10% 5.7 2.8 1.5 4.0 0.3 min. GA342DR7GF102KW02L AC250 (r.m.s.) X7R (EIA) 1000 10% 4.5 2.0 2.0 2.5 0.3 min. GA352QR7GF102KW01L AC250 (r.m.s.) X7R (EIA) 1000 10% 5.7 2.8 1.5 4.0 0.3 min. Rated Voltage (V) TC Code (Standard) Capacitance (pF) GA342D1XGF100JY02L AC250 (r.m.s.) SL (JIS) 10 5% 4.5 2.0 GA342D1XGF120JY02L AC250 (r.m.s.) SL (JIS) 12 5% 4.5 GA342D1XGF150JY02L AC250 (r.m.s.) SL (JIS) 15 5% 4.5 GA342D1XGF180JY02L AC250 (r.m.s.) SL (JIS) 18 5% GA342D1XGF220JY02L AC250 (r.m.s.) SL (JIS) GA342A1XGF270JW31L AC250 (r.m.s.) GA342A1XGF330JW31L GA342A1XGF390JW31L Part Number Length L Width W Thickness T (mm) (mm) (mm) Continued on the following page. 192 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Electrode e (mm) 1.5 4.0 0.3 min. 1.5 4.0 0.3 min. 5.0 1.5 4.0 0.3 min. 5.7 5.0 1.5 4.0 0.3 min. 5.7 5.0 2.0 4.0 0.3 min. Length L Width W Thickness T (mm) (mm) (mm) GA352QR7GF152KW01L AC250 (r.m.s.) X7R (EIA) 1500 10% 5.7 2.8 GA355QR7GF182KW01L AC250 (r.m.s.) X7R (EIA) 1800 10% 5.7 5.0 GA355QR7GF222KW01L AC250 (r.m.s.) X7R (EIA) 2200 10% 5.7 GA355QR7GF332KW01L AC250 (r.m.s.) X7R (EIA) 3300 10% GA355DR7GF472KW01L AC250 (r.m.s.) X7R (EIA) 4700 10% AC250V Type GA2 Series Capacitance (pF) Safety Standard Certified GA3 Series TC Code (Standard) Product Information Rated Voltage (V) Only for Applications Electrode g min. (mm) Part Number For General Purpose GRM/GRJ Series Continued from the preceding page. 193 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Chip Monolithic Ceramic Capacitors Safety Standard Certified GA3 Series IEC60384-14 Class Y3 Type GD e g e Features T 1. Available for equipment based on IEC/EN60950 and UL1950. 2. Type GD can be used as a Y3-class capacitor. 3. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 4. +125 degree C guaranteed 5. Only for reflow soldering L Part Number GA342A GA342D GA342Q GA343D GA343Q Applications 1. Ideal for use on line filters and couplings for DAA modems without transformers 2. Ideal for use on line filters for information equipment W Dimensions (mm) T 1.0 +0, -0.3 2.0 0.2 2.0 0.2 1.5 +0, -0.3 2.0 +0, -0.3 3.2 0.3 1.5 +0, -0.3 L W 4.5 0.3 4.5 0.4 e min. g min. 0.3 2.5 Standard Certification Standard No. Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Class Rated Voltage Y3 AC250V(r.m.s.) UL 60950-1 UL Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. IEC 60384-14 EN 60384-14 SEMKO Applications Size Switching power supplies 4.5x3.2mm and under Y Communication network devices such as a modem Electrode g min. (mm) Electrode e (mm) 2.0 2.5 0.3 min. 2.0 2.5 0.3 min. 2.0 2.0 2.5 0.3 min. 2.0 2.0 2.5 0.3 min. 4.5 2.0 2.0 2.5 0.3 min. 27 5% 4.5 2.0 1.0 2.5 0.3 min. SL (JIS) 33 5% 4.5 2.0 1.0 2.5 0.3 min. AC250 (r.m.s.) SL (JIS) 39 5% 4.5 2.0 1.0 2.5 0.3 min. AC250 (r.m.s.) SL (JIS) 47 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGD560JW31L AC250 (r.m.s.) SL (JIS) 56 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGD680JW31L AC250 (r.m.s.) SL (JIS) 68 5% 4.5 2.0 1.0 2.5 0.3 min. GA342A1XGD820JW31L AC250 (r.m.s.) SL (JIS) 82 5% 4.5 2.0 1.0 2.5 0.3 min. GA342QR7GD101KW01L AC250 (r.m.s.) X7R (EIA) 100 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD151KW01L AC250 (r.m.s.) X7R (EIA) 150 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD221KW01L AC250 (r.m.s.) X7R (EIA) 220 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD331KW01L AC250 (r.m.s.) X7R (EIA) 330 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD471KW01L AC250 (r.m.s.) X7R (EIA) 470 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD681KW01L AC250 (r.m.s.) X7R (EIA) 680 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD102KW01L AC250 (r.m.s.) X7R (EIA) 1000 10% 4.5 2.0 1.5 2.5 0.3 min. GA342QR7GD152KW01L AC250 (r.m.s.) X7R (EIA) 1500 10% 4.5 2.0 1.5 2.5 0.3 min. GA343QR7GD182KW01L AC250 (r.m.s.) X7R (EIA) 1800 10% 4.5 3.2 1.5 2.5 0.3 min. GA343QR7GD222KW01L AC250 (r.m.s.) X7R (EIA) 2200 10% 4.5 3.2 1.5 2.5 0.3 min. GA343DR7GD472KW01L AC250 (r.m.s.) X7R (EIA) 4700 10% 4.5 3.2 2.0 2.5 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) GA342D1XGD100JY02L AC250 (r.m.s.) SL (JIS) 10 5% 4.5 2.0 GA342D1XGD120JY02L AC250 (r.m.s.) SL (JIS) 12 5% 4.5 2.0 GA342D1XGD150JY02L AC250 (r.m.s.) SL (JIS) 15 5% 4.5 GA342D1XGD180JY02L AC250 (r.m.s.) SL (JIS) 18 5% 4.5 GA342D1XGD220JY02L AC250 (r.m.s.) SL (JIS) 22 5% GA342A1XGD270JW31L AC250 (r.m.s.) SL (JIS) GA342A1XGD330JW31L AC250 (r.m.s.) GA342A1XGD390JW31L GA342A1XGD470JW31L 194 Length L Width W Thickness T (mm) (mm) (mm) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Safety Standard Certified GA3 Series IEC60384-14 Class X2 Type GB g e Features T 1. Type GB can be used as an X2-class capacitor. 2. Chip monolithic ceramic capacitor (certified as conforming to safety standards) for AC lines. 3. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 4. Compared to lead type capacitors, this new capacitor is greatly downsized and low-profiled to 1/10 or less in volume, and 1/4 or less in height. 5. +125 degree C guaranteed 6. Only for reflow soldering Part Number GA355Q GA355D GA355E GA355X L 5.7 0.4 W g min. 3.0 AC250V Type GA2 Series L Dimensions (mm) W T e min. 1.5 +0,-0.3 2.0 +0,-0.3 5.0 0.4 0.3 2.5 +0,-0.3 2.9 +0,-0.4 Standard Certification Applications Standard No. Class Rated Voltage IEC 60384-14 EN 60384-14 X2 AC250V (r.m.s.) Safety Standard Certified GA3 Series Ideal for use as X capacitor for various switching power supplies VDE SEMKO Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. ESTI Electrode g min. (mm) Electrode e (mm) 1.5 3.0 0.3 min. 1.5 3.0 0.3 min. 5.0 2.0 3.0 0.3 min. 5.0 2.5 3.0 0.3 min. 5.7 5.0 2.5 3.0 0.3 min. 5.7 5.0 2.9 3.0 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance (pF) Length L Width W Thickness T (mm) (mm) (mm) GA355QR7GB103KW01L AC250 (r.m.s.) X7R (EIA) 10000 10% 5.7 5.0 GA355QR7GB153KW01L AC250 (r.m.s.) X7R (EIA) 15000 10% 5.7 5.0 GA355DR7GB223KW01L AC250 (r.m.s.) X7R (EIA) 22000 10% 5.7 GA355ER7GB333KW01L AC250 (r.m.s.) X7R (EIA) 33000 10% 5.7 GA355ER7GB473KW01L AC250 (r.m.s.) X7R (EIA) 47000 10% GA355XR7GB563KW06L AC250 (r.m.s.) X7R (EIA) 56000 10% 195 Product Information e Only for Applications For General Purpose GRM/GRJ Series Chip Monolithic Ceramic Capacitors PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Safety Standard Certified Type GA3 Series Specifications and GC/GD/GF/GB Test Methods Specifications and Test Methods No. Item Specifications Test Method 1 Operating Temperature Range Y55 to W125D 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers Y No failure should be observed when voltage in the table is applied between the terminations for 60T1 sec., provided the charge/discharge current is less than 50mA. 4 Dielectric Strength No defects or abnormalities Test Voltage DC1075V AC1500V (r.m.s.) AC2000V (r.m.s.) No self healing breakdowns or flash-overs have taken place in the capacitor. 10 impulses of alternating polarity are subjected. (5 impulses for each polarity) The interval between impulses is 60 sec. Applied Pulse: 1.2/50s Applied Voltage: 2.5kVo-p 6 Insulation Resistance (I.R.) More than 6,000M The insulation resistance should be measured with DC500T50V and within 60T5 sec. of charging. 7 Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) Q 9 AC250V Type GA2 Series 5 Pulse Voltage (Application: Type GD/GF) Safety Standard Certified GA3 Series Type GB Type GC/GD Type GF Product Information Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Char. X7R SL Specification D.F.V0.025 QU400W20C*2 (CF30pF) QU1000 (CU30pF) The capacitance/Q/D.F. should be measured at a frequency of 1T0.2kHz (SL char.: 1T0.2MHz) and a voltage of AC1T0.2V (r.m.s.) The capacitance measurement should be made at each step specified in the Table. Capacitance Temperature Characteristics Char. Capacitance Change X7R Within T15% Temperature characteristic guarantee is Y55 to W125D Char. Temperature Coefficient SL W350 to Y1000ppm/D Temperature characteristic guarantee is W20 to W85D Appearance No defects or abnormalities I.R. More than 1,000M Step 1 2 3 4 5 Temperature (D) 25T2 (20T2 for SL char.) Min. Operating Temp.T3 25T2 (20T2 for SL char.) Max. Operating Temp.T2 25T2 (20T2 for SL char.) SL char. : The capacitance should be measured at even 85D between step 3 and step 4. #Pretreatment for X7R char. W 0 Perform a heat treatment at 150Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition.*1 As in Fig., discharge is made 50 times at 5 sec. intervals from the capacitor (Cd) charged at DC voltage of specified. R3 10 Discharge Test (Application: Type GC) Dielectric Strength 10kV In accordance with item No.4 R1 V Ct R2 Cd Ct: Capacitor under test Cd: 0.001F R1: 1,000 R2: 100M R3: Surge resistance 11 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 *1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued on the following page. 196 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Continued from the preceding page. No. 12 Item Vibration Resistance Specifications Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. Q Char. X7R Test Method Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Specification D.F.V0.025 QU400W20C*2 (CF30pF) QU1000 (CU30pF) SL Solder resist Cu Only for Applications Safety Standard Certified Type GC/GD/GF/GB Specifications andand TestTest Methods GA3 Series Specifications Methods For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 4.5 40 d c a 100 13 Deflection 20 50 Pressurizing speed: 1.0mm/s Pressurize t : 1.6 Fig. 2 LZW (mm) 4.5Z2.0 4.5Z3.2 5.7Z2.8 5.7Z5.0 14 Solderability of Termination Appearance Capacitance Change Resistance 15 to Soldering I.R. Heat Dielectric Strength a 3.5 3.5 4.5 4.5 Dimension (mm) b c 7.0 2.4 7.0 3.7 8.0 3.2 8.0 5.6 R230 Capacitance meter Char. X7R SL Capacitance Change Within T10% Within T2.5% or T0.25pF (Whichever is larger) More than 1,000M 45 1.0 75% of the terminations are to be soldered evenly and continuously. No marking defects Flexure=1 d 45 (in mm) Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2T0.5 sec. Immersing speed: 25T2.5mm/s Temp. of solder: 245T5C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235T5C H60A or H63A Eutectic Solder Preheat the capacitor as in table. Immerse the capacitor in solder solution at 260T5D for 10T1 sec. Let sit at room condition*1 for 24T2 hrs., then measure. #Immersing speed: 25T2.5mm/s #Pretreatment for X7R char. W 0 Perform a heat treatment at 150Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition.*1 *Preheating In accordance with item No.4 Step 1 2 Temperature 100 to 120D 170 to 200D Time 1 min. 1 min. *1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued on the following page. 197 Safety Standard Certified GA3 Series b AC250V Type GA2 Series Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. No marking defects Product Information T _RSWTX\(c)VZ[_UY|^(R)]|UQR,S Glass Epoxy Board PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Safety Standard Certified Type GA3 Series Specifications and GC/GD/GF/GB Test Methods Specifications and Test Methods Continued from the preceding page. No. Item Appearance Capacitance Change D.F. Q 16 Temperature Cycle AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. No marking defects Char. X7R SL Char. X7R SL Capacitance Change Within T15% Within T2.5% or T0.25pF (Whichever is larger) Specification D.F.V0.05 QU400W20C*2 (CF30pF) QU1000 (CU30pF) I.R. More than 3,000M Dielectric Strength In accordance with item No.4 Test Method Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24T2 hrs. at room condition,*1 then measure. Step 1 2 3 4 Temperature (D) Min. Operating Temp.T3 Room Temp. Max. Operating Temp.T2 Room Temp. Time (min.) 30T3 2 to 3 30T3 2 to 3 #Pretreatment for X7R char. 0 Perform a heat treatment at 150W Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition.*1 Solder resist Cu Glass Epoxy Board Fig. 4 Appearance Capacitance Change Humidity 17 (Steady State) Product Information Safety Standard Certified GA3 Series Specifications D.F. Q Char. X7R SL Char. X7R SL Capacitance Change Within T15% Within T5.0% or T0.5pF (Whichever is larger) Specification D.F.V0.05 QU275W5/2C*2 (CF30pF) QU350 (CU30pF) I.R. More than 3,000M Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change D.F. Q 18 Life No marking defects I.R. Char. X7R SL Char. X7R SL Capacitance Change Within T20% Within T3.0% or T0.3pF (Whichever is larger) Specification D.F.V0.05 QU275W5/2C*2 (CF30pF) QU350 (CU30pF) More than 3,000M Before this test, the test shown in the following is performed. *Item 11 Adhesive Strength of Termination (applied force is 5N) *Item 13 Deflection Let the capacitor sit at 40T2D and relative humidity of 90 to 95% W24 for 500Y 0 hrs. Remove and let sit for 24T2 hrs. at room condition,*1 then measure. #Pretreatment for X7R char. 0 Perform a heat treatment at 150W Y10D for 60T5 min. and then let sit for 24T2 hrs. at room condition.*1 Before this test, the test shown in the following is performed. *Item 11 Adhesive Strength of Termination (apply force is 5N) *Item 13 Deflection Impulse Voltage Each individual capacitor should be subjected to a 2.5kV (Type GC/GF: 5kV) Impulse (the voltage value means zero to peak) for three times. Then the capacitors are applied to life test. GB In accordance with item No.4 100 90 50 (%) 30 0 t T T1 T2 Apply voltage as in Table for 1,000 hrs. at 125W2 Y0D, relative humidity 50% max. Type Dielectric Strength Front time (T1)=1.2s=1.67T Time to half-value (T2)=50s GC GF GD Applied Voltage AC312.5V (r.m.s.), except that once each hour the voltage is increased to AC1,000V (r.m.s.) for 0.1 sec. AC425V (r.m.s.), except that once each hour the voltage is increased to AC1,000V (r.m.s.) for 0.1 sec. Let sit for 24T2 hrs. at room condition,*1 then measure. #Pretreatment for X7R char. W 0 Perform a heat treatment at 150Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition.*1 *1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued on the following page. 198 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Appearance Capacitance Change 19 Humidity Loading D.F. Q Specifications Test Method No marking defects Char. X7R SL Char. X7R SL Capacitance Change Within T15% Within T5.0% or T0.5pF (Whichever is larger) Specification D.F.V0.05 QU275W5/2C*2 (CF30pF) QU350 (CU30pF) I.R. More than 3,000M Dielectric Strength In accordance with item No.4 Before this test, the test shown in the following is performed. *Item 11 Adhesive Strength of Termination (apply force is 5N) *Item 13 Deflection Apply the rated voltage at 40T2D and relative humidity of 90 to W24 95% for 500Y 0 hrs. Remove and let sit for 24T2 hrs. at room condition,*1 then measure. #Pretreatment for X7R char. 0 Perform a heat treatment at 150W Y10 D for 60T5 min. and then let sit for 24T2 hrs. at room condition.*1 The capacitor should be individually wrapped in at least one but not more than two complete layers of cheesecloth. The capacitor should be subjected to 20 discharges. The interval between successive discharges should be 5 sec. The UAC should be maintained for 2 min. after the last discharge. F S1 Tr S2 C1 UAC L1 R L2 C2 C3 L3 Cx Ct Ut L4 Oscilloscope 20 Active Flammability The cheesecloth should not be on fire. C1,2 L1 to 4 Ct Cx F : 1FT10% C3 : 0.033FT5% 10kV : 1.5mHT20% 16A Rod core choke : 3FT5% 10kV R : 100T2% : Capacitor under test UAC : URT5% : Rated Voltage : Fuse, Rated 16A UR Ut : Voltage applied to Ct Ux Type GD, GB GC, GF Ui Ui 2.5kV 5kV time The burning time should not exceed 30 sec. The tissue paper should not ignite. Test Specimen 45 200T5mm Passive Flammability About 8mm 21 The capacitor under test should be held in the flame in the position which best promotes burning. Each specimen should be exposed to the flame only once. Time of exposure to flame: 30 sec. Length of flame : 12T1mm Gas burner : Length 35mm min. Inside Dia. 0.5T0.1mm Outside Dia. 0.9mm max. Gas : Butane gas Purity 95% min. Tissue About 10mm Thick Board *1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). 199 Safety Standard Certified GA3 Series Item Product Information No. Only for Applications Continued from the preceding page. AC250V Type GA2 Series Safety Standard Certified Type GC/GD/GF/GB Specifications andand TestTest Methods GA3 Series Specifications Methods For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GRM/GRJ/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example) Capacitance - Temperature Characteristics C0G/U2J/SL Characteristics X7R Characteristics 20 30 15 20 U2J X7R Char. Spec.(upper) 5 C0G SL 0 U2J C0G -5 Cap. Change (%) Cap. Change (%) Only for Applications 10 10 0 -10 -10 SL -20 -60 X7R Char. Spec.(lower) -20 -15 -40 -20 0 20 40 60 80 -30 -60 100 120 140 -40 -20 0 AC250V Type GA2 Series 20 40 60 80 100 120 140 Temperature (C) Temperature (C) GR4 Series 20 15 Safety Standard Certified GA3 Series Cap. Change (%) 10 5 0 -5 -10 -15 -20 -60 -40 -20 0 20 40 60 80 100 120 140 Impedance - Frequency Characteristics GRM Series (C0G Char. 250V) GRM Series (C0G Char. 630V) 100k 10k 10k 1k 22pF 10pF 1k 47pF 100pF Z () Z () 100 47pF 100 10 10 1 10pF 470pF 100pF 1000pF 1 100m 1M 10M 100M 1G 10G 100m 1M 10M Frequency (Hz) 100M 1G 10G Frequency (Hz) GRM Series (C0G Char. 1kV) GRM Series (X7R Char. 250V) 100k 1k 10k 100 10pF 1000pF 1k 22pF 100 10 47pF Z () Z () Product Information Reference Data Temperature (C) 100pF 100000pF 10000pF 1 10 100m 1 100m 1M 10M 100M Frequency (Hz) 1G 10G 10m 1M 10M 100M 1G Frequency (Hz) Continued on the following page. 200 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 GRM/GRJ/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example) Continued from the preceding page. Impedance - Frequency Characteristics GRM Series (X7R Char. 630V) GRJ Series (X7R Char. 250V) 100 1k (1) For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 10 (3) 1000pF (1) GRJ21AR72E102KWJ1D (2) GRJ21BR72E103KWJ3L (3) GRJ31BR72E223KWJ1L (4) GRJ31CR72E473KWJ3L (5) GRJ31CR72E104KWJ3L (6) GRJ55DR72E105KWJ1L (4) Z () Z () 10 10000pF 100000pF (5) 1 1 (6) 0.1 100m 10M 100M Frequency (Hz) 1G 0.01 1M 10M 100M 1G Frequency (Hz) GRJ Series (X7R Char. 630V) AC250V Type GA2 Series 10m 1M Only for Applications (2) 100 GR4 Series 100 1k (1) (2) 100 10 1 (6) (7) (8) 100pF 1000pF Safety Standard Certified GA3 Series (1) GRJ31BR72J102KWJ1L (2) GRJ31BR72J222KWJ1L (3) GRJ31BR72J472KWJ1L (4) GRJ31BR72J103KWJ1L (5) GRJ32QR72J223KWJ1L (6) GRJ32DR72J473KWJ1L (7) GRJ43DR72J104KWJ1L (8) GRJ55DR72J224KWJ1L 10 Z () Z () (3) (4) (5) 4700pF 1 0.1 100m 10M 100M 10m 1M 1G 10M Frequency (Hz) 100M 1G Frequency (Hz) GA2 Series Product Information Reference Data 0.01 1M GA3 Series (Type GF) 1k 1K 100 100 1000pF 1000pF 10 Z () Z () 10 10000pF 100000pF 2200pF 1 1 100m 100m 10m 1M 10m 1M 10M 100M Frequency (Hz) 10M 1G 100M 1G Frequency (Hz) GA3 Series (Type GD) GA3 Series (Type GB) 100 1K 150pF 100 10 1000pF 10000pF Z () Z () 10 2200pF 1 1 0.1 56000pF 100m 33000pF 10m 1M 10M 100M Frequency (Hz) 1G 0.01 1M 10M 100M 1G Frequency (Hz) Continued on the following page. 201 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 GRM/GRJ/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example) Continued from the preceding page. Capacitance - AC Voltage Characteristics GA3 Series (Type GF/GD, X7R Char.) GA3 Series (Type GB) at Room Condition (25C) at Room Condition (25C) 60 60 40 40 20 20 Cap. Change (%) Cap. Change (%) Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 0 -20 56000pF 0 100 200 300 400 500 AC Voltage [V(r.m.s.)] AC250V Type GA2 Series 33000pF -20 -40 -40 -60 Capacitance - DC Bias Characteristics GR7 Series 0 (1) GR721AW0BB103KW01D GR721AW0BB153KW01D GR721BW0BB223KW03L GR731AW0BB223KW01D GR721BW0BB273KW03L GR731AW0BB273KW01D GR731AW0BB333KW01D Cap. Change (%) -20 (2) -40 (1) -60 (2) GR731AW0BB103KW01D GR731AW0BB153KW01D GR731BW0BB223KW01L GR731BW0BB333KW01L GR731CW0BB473KW03L -80 Product Information Reference Data -100 0 50 100 150 200 DC Bias (V) 202 250 300 -60 0 200 400 600 AC Voltage [V(r.m.s.)] 20 Safety Standard Certified GA3 Series 10000pF 0 350 800 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Package Taping is the standard packaging method. c Minimum Quantity Guide GRJ32/GRM32 0.8 0.8 4,000 - 1.0 4,000 - 1.25 - 3,000 1.0 4,000 - 1.25 - 3,000 1.6 - 2,000 1.0 4,000 - 1.25 - 3,000 1.5 - 2,000 2.0 - 1,000 1.0 - 3,000 1.5 - 2,000 1.5 - 1,000 2.0 - 1,000 2.5 - 500 2.0 3.2 4.5 1.25 1.6 2.5 2.0 3.2 GRJ55/GRM55/GR455 5.7 5.0 2.0 - 1,000 GA242 4.5 2.0 1.5 - 2,000 1.5 - 1,000 2.0 - 1,000 2.0 - 1,000 1.0 - 3,000 1.5 - 2,000 2.0 - 2,000 1.5 - 1,000 2.0 - 1,000 1.5 - 1,000 1.5 - 1,000 2.0 - 1,000 2.5 - 500 2.7 - 500 2.9 - 500 GA243 4.5 3.2 GA255 5.7 5.0 GA342 4.5 2.0 GA343 4.5 3.2 GA352 5.7 2.8 GA355 5.7 5.0 Only for Applications Embossed Tape 1.6 4.5 GRJ43/GRM43/GR443 Safety Std. Certification Paper Tape 3.2 GRM42/GR442 AC250V T AC250V Type GA2 Series GRJ31/GRM31/GR731 W Safety Standard Certified GA3 Series GRJ21/GRM21/GR721 o180mm Reel L Product Information Package GRM18 Medium Voltage Quantity (pcs.) Dimensions (mm) Part Number c Tape Carrier Packaging (1) Appearance of Taping q Embossed Tape w Paper Tape Cover Tape: 0.06mm in thickness Top Tape: 0.05mm in thickness Sprocket Hole: As specified in (2) Sprocket Hole: As specified in (2) Cavity for Chip: As specified in (2) Cavity for Chip: As specified in (2) Bottom Tape: 0.05mm in thickness Base Tape: As specified in (2) Packed Chips Chip For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Base Tape: As specified in (2) Packed Chips Chip Continued on the following page. 203 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Package Continued from the preceding page. (2) Dimensions of Tape q Embossed Tape W0.1 4.0T0.05 0.25T0.1 AC250V Type GA2 Series Direction of Feed B* GRJ21/GRM21/GR721 (TU1.25mm) 1.45 2.25 GRJ31/GRM31/GR731 (TU1.25mm) 2.0 3.6 2.9 3.6 (TU1.25mm) 0.3T0.1 1.75T0.1 A 2.5 max. A* o1.5Y0 4.0T0.1 Direction of Feed GRJ32/GRM32 2.0T0.05 B B A Part Number 8.0T0.1*1 1.75T0.1 3.5T0.05 2.0T0.05 8.0T0.3 W0.1 o1.5Y0 4.0T0.1 Safety Standard Certified GA3 Series 3.7 max. A* B* GRM42/GR442/GA242/GA342 Part Number 2.5 5.1 GRJ43/GRM43/GR443/GA243/GA343 3.6 4.9 GA352 3.2 6.1 GRJ55/GRM55/GR455/GA255/GA355 5.4 6.1 *1 4.00.1mm in case of GRM42/GR442/GA242/GA342 *Nominal Value *Nominal Value (in mm) w Paper Tape (3) Dimensions of Reel 8mm width, 4mm pitch Tape 4.0T0.1 2.0T0.05 1.1 max. 1.75T0.1 A 13.0T1.0 (Tape width 8mm) 17.0T1.0 (Tape width 12mm) 8.0T0.3 W0.1 o1.5Y0 3.5T0.05 4.0T0.1 B 2.0T0.5 Direction of Feed 180 +0 -1.5 o13T0.2 +1 60 -0 Product Information Package 12mm width, 8mm/4mm pitch Tape 5.5T0.05 Only for Applications 8mm width, 4mm pitch Tape 12.0T0.3 For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o21T0.8 Part Number A* B* GRM18 1.05 1.85 GRJ21/GRM21/GR721 (T=1.0mm) 1.45 2.25 GRM31/GR731 (T=1.0mm) 2.0 3.6 GRM32 (T=1.0mm) 2.9 3.6 +1.0 9.0 -0 (Tape width 8mm) *Nominal Value (in mm) +1.0 13.0 -0 (Tape width 12mm) (in mm) Continued on the following page. 204 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Continued from the preceding page. Vacant section Chip mounting unit Vacant section 160 min. 190 min. 210 min. (Top Tape or Cover Tape alone) Direction of feed AC250V Type GA2 Series (in mm) 180 Top Tape or Cover Tape Safety Standard Certified GA3 Series 165 to Base Tape Product Information Package (4) Taping Method q Tapes for capacitors are wound clockwise. The sprocket holes are to the right as the tape is pulled toward the user. w Part of the leader and part of the empty tape should be attached to the end of the tape as shown at right. e The top tape or cover tape and base tape are not attached at the end of the tape for a minimum of 5 pitches. r Missing capacitors number within 0.1% of the number per reel or 1 pc, whichever is greater, and are not continuous. t The top tape or cover tape and bottom tape should not protrude beyond the edges of the tape and should not cover sprocket holes. y Cumulative tolerance of sprocket holes, 10 pitches: T0.3mm. u Peeling off force: 0.1 to 0.6N in the direction shown at right. Only for Applications Package For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 205 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 !Caution Storage and Operating Conditions Operating and storage environment Do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. In addition, avoid exposure to moisture. Before cleaning, bonding or molding this product, verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed 5 to 40 degrees centigrade and 20 to 70%. Handling 1. Vibration and impact Do not expose a capacitor to excessive shock or vibration during use. 2. Do not directly touch the chip capacitor, especially the ceramic body. Residue from hands/fingers may create a short circuit environment. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. Product Information !Caution Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 206 Use capacitors within 6 months of delivery. Check the solderability after 6 months or more. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 !Caution Caution (Rating) Positional Measurement DC Voltage V0-p DC+AC Voltage V0-p AC250V Type GA2 Series AC Voltage Vp-p Pulse Voltage (1) Vp-p Pulse Voltage (2) Safety Standard Certified GA3 Series Voltage Only for Applications 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p which contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. When DC-rated capacitors are to be used in input circuits from a commercial power source (AC filter), be sure to use Safety Certified Capacitors because various regulations for withstanding voltage or impulses, established for all equipment, should be taken into consideration. For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Vp-p Product Information !Caution 2. Operating Temperature, Self-generated Heat, and Load Reduction at High-frequency Voltage Condition Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency voltage, pulse voltage, it may self-generate heat due to dielectric loss. (1) In the case of X7R char. Applied voltage should be the load such as selfgenerated heat is within 20C on the condition of atmosphere temperature 25C. When measuring, use a thermocouple of small thermal capacity -K of o0.1mm in conditions where the capacitor is not affected by radiant heat from other components or surrounding ambient fluctuations. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) Continued on the following page. 207 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 !Caution Continued from the preceding page. (2) In case of C0G, U2J char. Due to the low self-heating characteristics of lowdissipation capacitors, the allowable electric power of these capacitors is generally much higher than that of X7R characteristic capacitors. When a high frequency voltage that causes 20C selfheating to the capacitor is applied, it will exceed the capacitor's allowable electric power. The frequency of the applied sine wave voltage should be less than 500kHz (less than 100kHz in the case of rated voltage: DC3.15kV). The applied voltage should be less than the value shown in figure below. In the case of non-sine wave that includes a harmonic frequency, please contact our sales representatives or product engineers. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) <C0G char., Rated Voltage: DC3.15kV> The capacitors less than 22pF can be applied maximum 4.0kV peak to peak at 100kHz or less only for the ballast or the resonance usage in the LCD backlight inverter circuit. <Capacitor Selection Tool> We are also offering free software/the capacitor selection tool: "Murata Medium Voltage Capacitors Selection Tool by Voltage Form," which will assist you in selecting a suitable capacitor. The software can be downloaded from Murata's Website. (http://www.murata.com/designlib/mmcsv/index.html). By inputting capacitance values and the applied voltage waveform of the specific capacitor series, this software will calculate the capacitor's power consumption and list suitable capacitors (non-sine wave is also available). The temperature of the surface of capacitor: 125C or less (including self-heating) C0G char., Rated Voltage: DC630V Allowable voltage [Vp-p] to 100pF (250) 1 10 100 Frequency [kHz] 1 10 100 Frequency [kHz] to 22pF 27 to 47pF (3150) 1000 1 10 100 Frequency [kHz] 1000 U2J char., Rated Voltage: DC250V (250) 10,000pF U2J char., Rated Voltage: DC1kV 1 10 100 Frequency [kHz] (630) 1,000pF 2,200pF 100 (500)1000 1 10 100 Frequency [kHz] (500)1000 Allowable voltage [Vp-p] 1000 1 10 100 Frequency [kHz] (500)1000 U2J char., Rated Voltage: DC3.15kV 10000 to 100pF 150pF 220pF 1000 100 1000 to 680pF 10000 to 470pF 10 100 Frequency [kHz] U2J char., Rated Voltage: DC630V U2J char., Rated Voltage: DC2kV 10000 (1000) 1000 to 4,700pF 100 to 100pF 100 1 1000 1000 Allowable voltage [Vp-p] Allowable voltage [Vp-p] 820pF 1000pF 100 10000 100 560pF 680pF 1000 C0G char., Rated Voltage: DC3.15kV to 470pF (630) 1 10 100 Frequency [kHz] (500)1000 Allowable voltage [Vp-p] 100 C0G char., Rated Voltage: DC1kV 10000 Allowable voltage [Vp-p] Allowable voltage [Vp-p] 1000 Allowable voltage [Vp-p] C0G char., Rated Voltage: DC250V 1000 Allowable voltage [Vp-p] Product Information !Caution Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. to 33pF 47pF 100pF (3150) 1000 1 10 100 Frequency [kHz] 1000 The sine-wave frequency VS allowable voltage Continued on the following page. 208 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 !Caution Continued from the preceding page. FUSE AC IN Only for Applications 3. Fail-safe Failure of a capacitor may result in a short circuit. Be sure to provide an appropriate fail-safe function such as a fuse on your product to help eliminate possible electric shock, fire, or fumes. Please consider using fuses on each AC line if the capacitors are used between the AC input lines and earth (line bypass capacitors), to prepare for the worst case, such as a short circuit. Product Information !Caution Safety Standard Certified GA3 Series AC250V Type GA2 Series 4. Test Condition for AC Withstanding Voltage (1) Test Equipment Tests for AC withstanding voltage should be made with equipment capable of creating a wave similar to a 50/60 Hz sine wave. If the distorted sine wave or overload exceeding the specified voltage value is applied, a defect may be caused. (2) Voltage Applied Method The capacitor's leads or terminals should be firmly connected to the output of the withstanding voltage test equipment, and then the voltage should be raised from near zero to the test voltage. If the test voltage is applied directly to the capacitor without raising it from near zero, it should be applied with the zero cross.* At the end of the test time, the test voltage should be reduced to near zero, and then the capacitor's leads or terminals should be taken off the output of the withstanding voltage test equipment. If the test voltage is applied directly to the capacitor without raising it from near zero, surge voltage may occur and cause a defect. Voltage sine wave *ZERO CROSS is the point where voltage sine wave passes 0V. - See the figure at right - For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 0V zero cross FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 209 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Caution (Soldering and Mounting) 1. Vibration and Impact Do not expose a capacitor to excessive shock or vibration during use. 2. Circuit Board Material It is possible for the chip to crack by the expansion and shrinkage of a metal board. Please contact us if you want to use our ceramic capacitors on a metal board such as Aluminum. 3. Land Layout for Cropping PC Board Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. [Chip Mounting Close to Board Separation Point] AC250V Type GA2 Series [Component Direction] Locate chip horizontal to the direction in which stress acts. Safety Standard Certified GA3 Series <Example to be avoided> <Example of improvement> C Perforation B D A Chip arrangement Worst AGCGB~D Best Slit Product Information !Caution Continued on the following page. 210 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 !Caution Continued from the preceding page. 4. Reflow Soldering [Standard Conditions for Reflow Soldering] ,,, ,,, ,,, ,,, ,,, ,,, ,,, ,,, ,,, Infrared Reflow Temperature (D) Only for Applications Soldering Peak Temperature Gradual Cooling 200C T 170C 150C 130C Preheating Time AC250V Type GA2 Series 60-120 seconds 30-60 seconds Vapor Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling T Safety Standard Certified GA3 Series When components are exposed to sudden heat, their mechanical strength can be decreased due to the extreme temperature changes which can cause flexing and result in internal mechanical damage, which will cause the parts to fail. In order to prevent mechanical damage, preheating is required for both the components and the PCB board. Preheating conditions are shown in Table 1. It is required to keep the temperature differential between the soldering and the components surface (T) as small as possible. Solderability of Tin plating termination chips might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chips before use. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (T) between the component and solvent within the range shown in the Table 1. 170C 150C 130C Table 1 Preheating Temperature Differential G--18/21/31 TV190D G--32/42/43/52/55 TV130D 60-120 seconds Recommended Conditions Lead Free Solder Peak Temperature 230-250C 230-240C 240-260C Atmosphere Air Air Air or N2 Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu [Allowable Soldering Temperature and Time] Soldering Temperature (D) Pb-Sn Solder Infrared Reflow Vapor Reflow Time 20 seconds max. Product Information !Caution Part Number 270 260 250 240 230 0 30 60 90 Soldering Time (sec.) In the case of repeated soldering, the accumulated soldering time must be within the range shown above. Optimum Solder Amount for Reflow Soldering Overly thick application of solder paste results in excessive solder fillet height. This makes the chip more susceptible to mechanical and thermal stress on the board and may cause cracked chips. Too little solder paste results in a lack of adhesive strength on the outer electrode, which may result in chips breaking loose from the PCB. Make sure the solder has been applied smoothly to the end surface to a height of 0.2mm min. For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. [Optimum Solder Amount for Reflow Soldering] 0.2mm min. in section Inverting the PCB Make sure not to impose an abnormal mechanical shock on the PCB. Continued on the following page. 211 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Product Information !Caution !Caution Continued from the preceding page. 5. Flow Soldering When components are exposed to sudden heat, their mechanical strength can be decreased due to the extreme temperature changes which can cause flexing and result in internal mechanical damage, which will cause the parts to fail. Additionally, an excessively long soldering time or high soldering temperature results in leaching by the outer electrodes, causing poor adhesion or a reduction in capacitance value due to loss of contact between electrodes and end termination. In order to prevent mechanical damage, preheating is required for both the components and the PCB board. Preheating conditions are shown in Table 2. It is required to keep temperature differential between the soldering and the components surface (T) as small as possible. When components are immersed in solvent after mounting, be sure to maintain the temperature difference between the component and solvent within the range shown in Table 2. Do not apply flow soldering to chips not listed in Table 2. Table 2 ,,, ,,, ,,, ,,, ,,, ,,, [Standard Conditions for Flow Soldering] Temperature (D) Soldering Peak Temperature T Preheating 60-120 seconds Temperature Differential Time 5 seconds max. [Allowable Soldering Temperature and Time] 270 260 250 240 230 0 Part Number Gradual Cooling 170C 150C 130C Soldering Temperature (D) Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 10 20 30 Soldering Time (sec.) TV150D G--18/21/31 In the case of repeated soldering, the accumulated soldering time must be within the range shown above. Recommended Conditions Pb-Sn Solder Lead Free Solder Peak Temperature 240-250C 250-260C Atmosphere Air N2 Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Optimum Solder Amount for Flow Soldering The top of the solder fillet should be lower than the thickness of components. If the solder amount is excessively large, the risk of cracking is higher during board bending or under any other stressful conditions. Up to Chip Thickness Adhesive in section Continued on the following page. 212 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Continued from the preceding page. 6. Correction with a Soldering Iron components and the PCB), should be within the conditions of table 3. It is required to keep the temperature differential between the soldering Iron and the component's surface (T) as small as possible. After soldering, do not allow the component/PCB to cool down rapidly. The operating time for the re-working should be as short as possible. When re-working time is too long, it may cause solder leaching, in turn causing a reduction of the adhesive strength of the terminations. Part Number AC250V Type GA2 Series Table 3 Temperature Preheating Temperature of Soldering Differential Atmosphere Temperature Iron tip (T) G--18/21/31 350C max. 150C min. TV190D air G--32/42/43/ 52/55 280C max. 150C min. TV130D air Optimum Solder Amount when re-working Using a Soldering Iron For sizes smaller than Gpp18, the top of the solder fillet should be lower than 2/3 of the thickness of the component or 0.5mm whichever is smaller. For sizes larger than Gpp21, the top of the solder fillet should be lower than 2/3 of the thickness of the component. If the solder amount is excessive, the risk of cracking is higher during board bending or under any other stressful conditions. A Soldering iron o3mm or smaller should be used. It is also necessary to keep the soldering iron from touching the components during the re-work. Solder wire with o0.5mm or smaller is required for soldering. Safety Standard Certified GA3 Series *Applicable for both Pb-Sn and Lead Free Solder. Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Solder Amount in section 7. Washing Excessive output of ultrasonic oscillation during cleaning causes PCBs to resonate, resulting in cracked chips or broken solder. Take note not to vibrate PCBs. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND FUMING WHEN THE PRODUCT IS USED. 213 Product Information !Caution When sudden heat is applied to the components by use of a soldering iron, the mechanical strength of the components will decrease because the extreme temperature change causes deformations inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board. Preheating conditions, (The "Temperature of the Soldering Iron Tip", "Preheating Temperature," "Temperature Differential" between iron tip and the Only for Applications !Caution For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Notice (Soldering and Mounting) 1. Construction of Board Pattern After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. Construction and Dimensions of Pattern (Example) Flow Soldering Chip Capacitor LgW Solder Resist c AC250V Type GA2 Series a b c 0.6-1.0 0.8-0.9 0.6-0.8 2.0g1.25 1.0-1.2 0.9-1.0 0.8-1.1 3.2g1.6 2.2-2.6 1.0-1.1 1.0-1.4 1.6g0.8 L W b Flow soldering : 3.2g1.6 or less available. Land a Reflow Soldering LgW a b c 0.6-0.8 0.6-0.7 0.6-0.8 2.0g1.25 1.0-1.2 0.6-0.7 0.8-1.1 3.2g1.6 2.2-2.4 0.8-0.9 1.0-1.4 3.2g2.5 2.0-2.4 1.0-1.2 1.8-2.3 4.5g2.0 2.8-3.4 1.2-1.4 1.4-1.8 4.5g3.2 2.8-3.4 1.2-1.4 2.3-3.0 5.7g2.8 4.0-4.6 1.4-1.6 2.1-2.6 5.7g5.0 4.0-4.6 1.4-1.6 3.5-4.8 Product Information Notice Safety Standard Certified GA3 Series 1.6g0.8 (in mm) Dimensions of Slit (Example) Chip Capacitor Slit Solder Resist d L e W Land Preparing the slit helps flux cleaning and resin coating on the back of the capacitor. However, the length of the slit design should be as short as possible to prevent mechanical damage in the capacitor. A longer slit design might receive more severe mechanical stress from the PCB. Recommended slit design is shown in the Table. LgW d e 1.6g0.8 - - 2.0g1.25 - - 3.2g1.6 1.0-2.0 3.2-3.7 3.2g2.5 1.0-2.0 4.1-4.6 4.5g2.0 1.0-2.8 3.6-4.1 4.5g3.2 1.0-2.8 4.8-5.3 5.7g2.8 1.0-4.0 4.4-4.9 5.7g5.0 1.0-4.0 6.6-7.1 (in mm) Continued on the following page. 214 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Continued from the preceding page. Land Layout to Prevent Excessive Solder Mounting Close to a Chassis d1 Chassis Mounting with Leaded Components Solder (Ground solder) Mounting Leaded Components Later Soldering Iron Lead Wire of Component to be Connected Later. Lead Wire Connected to a Part Provided with Lead Wires. Examples to Be Avoided Adhesive Base board in section Land Pattern d2 Solder Resist d1<d2 in section Solder Resist Solder Resist in section in section in section Safety Standard Certified GA3 Series 2. Mounting of Chips Thickness of adhesives applied Keep thickness of adhesives applied (50-105m or more) to reinforce the adhesive contact considering the thickness of the termination or capacitor (20-70m) and the land pattern (30-35m). Depending on the conditions of the soldering temperature and/or immersion (melting time), effective areas may be lost in some parts of the terminations. To prevent this, be careful in soldering so that any possible loss of the effective area on the terminations will securely remain at a maximum of 25% on all edge length A-B-C-D-A of part with A, B, C, D, shown in the Figure below. A B D C Termination Product Information Notice Mechanical shock of the chip placer When the positioning claws and pick-up nozzle are worn, the load is applied to the chip while positioning is concentrated in one position, thus causing cracks, breakage, faulty positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. An excessively low bottom dead point of the suction nozzle imposes great force on the chip during mounting, causing cracked chips. Please set the suction nozzle's bottom dead point on the upper surface of the board. 3. Soldering (1) Limit of losing effective area of the terminations and conditions needed for soldering. AC250V Type GA2 Series Examples of Improvements by the Land Division in section Only for Applications Notice For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (2) Flux Application An excessive amount of flux generates a large quantity of flux gas, causing deteriorated solderability. So apply flux thinly and evenly throughout. (A foaming system is generally used for flow soldering.) Flux containing too high a percentage of halide may cause corrosion of the outer electrodes without sufficient cleaning. Use flux with a halide content of 0.2% max. Do not use strong acidic flux. Do not use water-soluble flux.* (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) (3) Solder The use of Sn-Zn based solder will deteriorate the reliability of the MLCC. Please contact our sales representative or product engineers on the use of Sn-Zn based solder in advance. Continued on the following page. 215 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Product Information Notice Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice Continued from the preceding page. 4. Cleaning Please confirm there is no problem in the reliability of the product beforehand when cleaning it with the intended equipment. The residue after cleaning it might cause a decrease in the surface resistance of the chip and the corrosion of the electrode part, etc. As a result it might cause reliability to deteriorate. Please confirm beforehand that there is no problem with the intended equipment in ultrasonic cleansing. 5. Resin Coating Please use it after confirming there is no influence on the product with the intended equipment before the resin coating and molding. A cracked chip might be caused at the cooling/heating cycle by the amount of resin spreading and/or bias thickness. The resin for coating and molding must be selected as the stress is small when stiffening and the hygroscopic is low as possible. Rating 1. Capacitance change of capacitor (1) In the case of X7R char. Capacitors have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. Therefore, it is not likely to be suitable for use in a time constant circuit. Please contact us if you need detailed information. (2) In the case of any char. except X7R Capacitance might change a little depending on the surrounding temperature or an applied voltage. Please contact us if you intend to use this product in a strict time constant circuit. 216 2. Performance check by equipment Before using a capacitor, check that there is no problem in the equipment's performance and the specifications. Generally speaking, CLASS 2 (X7R char.) ceramic capacitors have voltage dependence characteristics and temperature dependence characteristics in capacitance. Therefore, the capacitance value may change depending on the operating condition in the equipment. Accordingly, be sure to confirm the apparatus performance of receiving influence in a capacitance value change of a capacitor, such as leakage current and noise suppression characteristics. Moreover, check the surge-proof ability of a capacitor in the equipment, if needed, because the surge voltage may exceed the specific value by the inductance of the circuit. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ISO 9001 Certifications Qualified Standards The products listed here have been produced by ISO 9001 certified factory. Plant Fukui Murata Mfg. Co., Ltd. Izumo Murata Mfg. Co., Ltd. Okayama Murata Mfg. Co., Ltd. Murata Electronics Singapore (Pte.) Ltd. Beijing Murata Electronics Co., Ltd. Wuxi Murata Electronics Co., Ltd. 217