Series 40-5 Wedge Lok SERIES 40-5 WEDGE-LOK DSCC 89064 & CID 59789 RECOMMENDED GAP WIDTH PCB + 7.62 (.300) RECOMMENDED TORQUE 80 N-cm (7 in-lbs) WEIGHT 1.16 g/cm (.104 oz/in) MATERIALS AND FINISH WEDGES Material: Aluminum Alloy 6061-T6 per QQ-A-200/8 Finish: See finish table on opposite page SCREW .09-in. or 2.5-mm hex. socket head cap screw, depending on mounting configuration Material: 300 series stainless steel per QQ-S-763 ASTM A-582 A286 per FF-S-86 with dry film lube per MIL-L-46010 for "TLC" option Finish: Passivated per AMS2700 ALIGNMENT SPRINGS Material: 301 stainless steel half hard per AMS 5518 Finish: Passivated per AMS2700 OPTIONAL LOCK AND FLAT WASHER Material: 300 series stainless steel per QQ-S-763 and ASTM A-582 Finish: Passivated per AMS2700 OPTIONAL LOCKNUT Material: Type A286 stainless steel per ASTM AMS 5525 Finish: Silver plate per AMS 2410 nVent.com/SCHROFF 1-800-854-7086 80 - m in-lb SERIES 40-5 WEDGE LOK L A RED AREA EX ED L ED RED AREA EALED L LA A ER ER L ED VI OPTION LF OPTION Provides additional LN OPTION L OPTION Provides additional wedge when and vibration RELAXED A A LE A EL EX A D EX A DED T - L FINISH TABLE * [Blank] TABLE B [Blank] LN [Blank] [Blank] , L [Blank] nVent may modify standard parts without prior notice to or approval from customers. These modifications may change product appearance, but will not have a detrimental effect on form, fit or function. (c)2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.