15,000 W SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
Microsemi
Scottsdale Division
Page 1
Copyright © 2007
10-12-2007 REV G
WWW.Micr
o
semi .COM
SCOTTSDALE DIVISION
PLAD15KP5.0 thru PLAD15KP400CA, e3
PLAD15KP5.0- 400CA, e3
DESCRIPTION APPEARANCE
These Microsemi 15 kW Transient Voltage Suppressors (TVSs)
are designed for applications requiring protection of voltage-
sensitive electronic devices that may be damaged by harsh or
severe voltage transients including lightning per IEC61000-4-5 and
classes with various source impedances described herein. This
series is available in 5.0 to 400 volt standoff voltages (VWM) in both
unidirectional and bidirectional offered in one surface mount
device. Microsemi also offers numerous other TVS products to
meet higher and lower power demands and special applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES APPLIC ATIONS / BENEFITS
• Available in both Unidirectional and Bidirectional
construction (Bidirectional with C or CA suffix)
• Low profile surface mount
• Available in tape-and-reel or waffle pack
• Selections for 5.0 to 400 volts standoff voltages (VWM)
• Suppresses transients up to 15,000 watts @ 10/1000 µs
(see Figure 1)
• Fast response
• Optional 100% screening for avionics grade is
available by adding MA prefix to part number for added
100% temperature cycle -55oC to +125oC (10X) as well
as surge (3X) and 24 hours HTRB with post test VZ &
IR (in the operating direction for unidirectional or both
directions for bidirectional)
• Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, and JANTXV are also available
by adding MQ, MX, or MV prefixes respectively to part
numbers.
• Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
• RoHS compliant devices available by adding “e3” suffix
• Protection from switching transients and induced RF
• Protection from ESD, and EFT per IEC 61000-4-2
and IEC 61000-4-4
• Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1,2,3,4: PLAD15KP5.0A to 400A or CA
Class 5: PLAD15KP5.0A to 400A or CA
• Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance:
Class 1,2,3,4: PLAD15KP5.0A to 400A or CA
• Secondary lightning protection per IEC61000-4-5 with
2 Ohms source impedance:
Class 2,3: PLAD15KP5.0A to 400A or CA
Class 4: PLAD15KP5.0 to 54A or CA
• Pin injection protection per RTCA/DO-160D for
Waveform 4 (6.4/69 µs):
Level 4: PLAD15KP5.0A to 400A or CA
Level 5: PLAD15KP5.0A to 100A or CA
• Pin injection protection per RTCA/DO-160D for
Waveform 5A (40/120 µs):
Level 4: PLAD15KP5.0A to 28A or CA
MAXIMUM RAT ING S MECHANICAL AND PACKAGING
• Operating and Storage temperature: -55ºC to +150ºC
• Peak Pulse Power dissipation at 25ºC: 15,000 watts at
10/1000 μs (also see Figures 1 and 2)
• Impulse repetition rate (duty factor): 0.05%
• t
clamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
• Thermal resistance: 0.2 C/W junction to case or 50ºC/W
junction to ambient when mounted on FR4 PC board with
recommended mounting pad (see last page)
• Steady-State Power dissipation: 50 watts at TC = 100oC
with good heat sink, or 2.5 watts at TA = 25ºC if mounted on
FR4 PC board as described for thermal resistance
• Forward Surge Voltage: 3.5 V maximum @ 500 Amps 8.3
ms half-sine wave (unidirectional devices only)
• Solder temperatures: 260 ºC for 10 s (maximum)
• CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
• TERMINALS: Tin-Lead or RoHS Compliant
annealed matte-Tin plating readily solderable per
MIL-STD-750, method 2026
• MARKING: Body marked with part number
• POLARITY: For unidirectional devices, the cathode
is on the metal backside (package bottom)
• WEIGHT: 1 gram (approximate)
• TAPE & Reel: Standard per EIA-481-B (add “TR”
suffix to part number)
• See package dimensions on last page
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
15,000 W SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
Microsemi
Scottsdale Division
Page 2
Copyright © 2007
10-12-2007 REV G
WWW.Micr
o
semi .COM
SCOTTSDALE DIVISION
PLAD15KP5.0 thru PLAD15KP400CA, e3
PLAD15KP5.0- 400CA, e3
ELECTRICAL CHARACTERISTICS
MICROSEMI
PART
NUMBER
(Note 2)
REVERSE
STAND-OFF
VOLTAGE
VWM
(Note 1)
VOLTS
BREAKDOWN
VOLTAGE
V(BR)
V(BR) @ I(BR)
VOLTS mA
MAXIMUM
CLAMPING
VOLTAGE
VC
@ IPP
VOLTS
MAXIMUM
STANDBY
CURRENT
ID
@ VWM
μA
MAXIMUM
PEAK PULSE
CURRENT
IPP (FIG. 3)
A
MAXIMUM
TEMPERATURE
COEFFICIENT
OF V(BR)
αV(BR)
mV/ ºC
PLAD15KP5.0
PLAD15KP5.0A
PLAD15KP6.0
PLAD15KP6.0A
5.0
5.0
6.0
6.0
6.40 – 7.30
6.40 – 7.00
6.67 – 8.15
6.67 – 7.37
150
150
150
150
9.6
9.2
11.4
10.3
15000
15000
15000
15000
1620
1629
1317
1455
4.0
4.0
4.0
4.0
PLAD15KP6.5
PLAD15KP6.5A
PLAD15KP7.0
PLAD15KP7.0A
6.5
6.5
7.0
7.0
7.22 – 8.82
7.22 – 7.98
7.78 – 9.51
7.78 – 8.60
150
150
150
150
12.3
11.2
13.3
12.0
6000
6000
3000
3000
1221
1341
1134
1251
4.0
4.0
5.0
5.0
PLAD15KP7.5
PLAD15KP7.5A
PLAD15KP8.0
PLAD15KP8.0A
7.5
7.5
8.0
8.0
8.33 – 10.2
8.33 – 9.21
8.89 – 10.9
8.89 – 9.83
5
5
5
5
14.3
12.9
15.0
13.6
750
750
450
450
1350
1164
999
1101
6.0
6.0
6.0
6.0
PLAD15KP8.5
PLAD15KP8.5A
PLAD15KP9.0
PLAD15KP9.0A
8.5
8.5
9.0
9.0
9.44 – 11.5
9.44 – 10.4
10.0 – 12.2
10.0 – 11.1
5
5
5
5
15.9
14.4
16.9
15.4
150
150
120
60
942
1041
885
975
7.0
7.0
8.0
8.0
PLAD15KP10
PLAD15KP10A
PLAD15KP11
PLAD15KP11A
10
10
11
11
11.1 – 13.6
11.1 – 12.3
12.2 – 14.9
12.2 – 13.5
5
5
5
5
18.8
17.0
20.1
18.2
45
45
10
10
798
882
747
822
9.0
9.0
10
10
PLAD15KP12
PLAD15KP12A
PLAD15KP13
PLAD15KP13A
12
12
13
13
13.3 – 16.3
13.3 – 14.7
14.4 – 17.6
14.4 – 15.9
5
5
5
5
22.0
19.9
23.8
21.5
10
10
10
10
681
753
630
696
11
11
12
12
PLAD15KP14
PLAD15KP14A
PLAD15KP15
PLAD15KP15A
14
14
15
15
15.6 – 19.1
15.6 – 17.2
16.7 – 20.4
16.7 – 18.5
5
5
5
5
25.8
23.2
26.9
24.4
10
10
10
10
582
645
564
318
13
13
15
15
PLAD15KP16
PLAD15KP16A
PLAD15KP17
PLAD15KP17A
16
16
17
17
17.8 – 21.8
17.8 – 19.7
18.9 – 23.1
18.9 – 20.9
5
5
5
5
28.8
26.0
30.5
27.6
10
10
10
10
528
576
492
543
18
16
19
18
PLAD15KP18
PLAD15KP18A
PLAD15KP20
PLAD15KP20A
18
18
20
20
20.0 – 24.4
20.0 – 22.1
22.2 – 27.1
22.2 – 24.5
5
5
5
5
32.2
29.2
35.8
32.4
10
10
10
10
465
516
417
462
20
19
24
22
PLAD15KP22
PLAD15KP22A
PLAD15KP24
PLAD15KP24A
22
22
24
24
24.4 – 29.8
24.4 – 26.9
26.7 – 32.6
26.7 – 29.5
5
5
5
5
39.4
35.5
43.0
38.9
10
10
10
10
381
423
348
384
27
24
30
27
PLAD15KP26
PLAD15KP26A
PLAD15KP28
PLAD15KP28A
26
26
28
28
28.9 – 35.3
28.9 – 31.9
31.1 – 38.0
31.1 – 34.4
5
5
5
5
46.6
42.1
50.1
45.5
10
10
10
10
321
357
297
330
33
29
34
30
PLAD15KP30
PLAD15KP30A
PLAD15KP33
PLAD15KP33A
30
30
33
33
33.3 – 40.7
33.3 – 36.8
36.7 – 44.9
36.7 – 40.6
5
5
5
5
53.5
48.4
59.0
53.3
10
10
10
10
279
309
255
282
38
35
41
38
PLAD15KP36
PLAD15KP36A
PLAD15KP40
PLAD15KP40A
36
36
40
40
40.0 – 48.9
40.0 – 44.2
44.4 – 54.3
44.4 – 49.1
5
5
5
5
64.3
58.1
71.4
64.5
10
10
10
10
234
258
210
234
45
40
50
45
PLAD15KP43
PLAD15KP43A
PLAD15KP45
PLAD15KP45A
43
43
45
45
47.8 – 58.4
47.8 – 52.8
50.0 – 61.1
50.0 – 55.3
5
5
5
5
76.7
69.4
80.3
72.7
10
10
10
10
195
216
186
207
54
49
57
51
PLAD15KP48
PLAD15KP48A
PLAD15KP51
PLAD15KP51A
48
48
51
51
53.3 – 65.1
53.3 – 58.9
56.7 – 69.3
56.7 – 62.7
5
5
5
5
85.5
77.4
91.1
82.4
10
10
10
10
174
195
165
183
62
55
65
60
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
15,000 W SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
Microsemi
Scottsdale Division
Page 3
Copyright © 2007
10-12-2007 REV G
WWW.Micr
o
semi .COM
SCOTTSDALE DIVISION
PLAD15KP5.0 thru PLAD15KP400CA, e3
PLAD15KP5.0- 400CA, e3
MICROSEMI
PART
NUMBER
(Note 2)
REVERSE
STAND-
OFF
VOLTAGE
VWM
(Note 1)
VOLTS
BREAKDOWN
VOLTAGE
V(BR)
V(BR) @ I(BR)
VOLTS mA
MAXIMUM
CLAMPING
VOLTAGE
VC
@ IPP
VOLTS
MAXIMUM
STANDBY
CURRENT
ID
@ VWM
μA
MAXIMUM
PEAK PULSE
CURRENT
IPP (FIG. 3)
A
MAXIMUM
TEMPERATURE
COEFFICIENT
OF V(BR)
αV(BR)
mV/ ºC
PLAD15KP54
PLAD15KP54A
PLAD15KP58
PLAD15KP58A
54
54
58
58
60.0 – 73.3
60.0 – 66.3
64.4 – 78.7
64.4 – 71.2
5
5
5
5
96.3
87.1
103.0
93.6
10
10
10
10
156
171
147
159
70
64
77
69
PLAD15KP60
PLAD15KP60A
PLAD15KP64
PLAD15KP64A
60
60
64
64
66.7 – 81.5
66.7 – 73.7
71.1 – 86.9
71.1 – 78.6
5
5
5
5
107.0
96.8
114.0
103.0
10
10
10
10
141
156
132
147
79
70
85
75
PLAD15KP70
PLAD15KP70A
PLAD15KP75
PLAD15KP75A
70
70
75
75
77.8 – 95.1
77.8 – 86.0
83.3 – 102.0
83.3 – 92.1
5
5
5
5
125
113
134
121
10
10
10
10
120
132
111
123
93
84
100
90
PLAD15KP78
PLAD15KP78A
PLAD15KP85
PLAD15KP85A
78
78
85
85
86.7 – 106.0
86.7 – 95.8
94.4 – 115.0
94.4 – 104.0
5
5
5
5
139
126
151
137
10
10
10
10
108
120
99
108
104
94
113
102
PLAD15KP90
PLAD15KP90A
PLAD15KP100
PLAD15KP100A
90
90
100
100
100 – 122
100 – 111
111 – 136
111 – 123
5
5
5
5
160
146
179
162
10
10
10
10
93
102
84
93
120
109
134
122
PLAD15KP110
PLAD15KP110A
PLAD15KP120
PLAD15KP120A
110
110
120
120
122 – 149
122 – 135
133 – 163
133 – 147
5
5
5
5
196
177
214
193
10
10
10
10
78
84
70
78
147
132
161
145
PLAD15KP130
PLAD15KP130A
PLAD15KP150
PLAD15KP150A
130
130
150
150
144 – 176
144 – 159
167 – 204
167 – 185
5
5
5
5
231
209
268
243
10
10
10
10
65
71
56
62
174
157
202
183
PLAD15KP160
PLAD15KP160A
PLAD15KP170
PLAD15KP170A
160
160
170
170
178 – 218
178 – 197
189 – 231
189 – 209
5
5
5
5
287
259
304
275
10
10
10
10
52
58
49
55
216
195
229
207
PLAD15KP180
PLAD15KP180A
PLAD15KP200
PLAD15KP200A
180
180
200
200
200 – 244
200 – 221
222 – 271
222 – 245
5
5
5
5
321
291
356
322
10
10
10
10
47
52
42
47
242
219
269
243
PLAD15KP220
PLAD15KP220A
PLAD15KP250
PLAD15KP260A
220
220
250
260
245 – 299
245 – 271
278 – 308
289 – 320
5
5
5
5
293
356
403
419
10
10
10
10
38
42
37
35.5
297
269
306
318
PLAD15KP280A
PLAD15KP300A
PLAD15KP350A
PLAD15KP400A
280
300
350
400
311 – 345
333 – 369
389 – 431
444 - 492
5
5
5
5
451
483
564
644
10
10
10
10
33
31
26.5
23
344
368
430
490
NOTE 1: Transient Voltage Suppressors are normally selected with reverse “Stand Off Voltage” VWM which should
be equal to or greater than the dc or continuous peak operating voltage level.
NOTE 2: For bidirectional construction, indicate a C or CA suffix after the part number.
SYMBOLS & DEFINITI ONS
Symbol Definition Symbol Definition
VWM Working Peak (Standoff) Voltage IPP Peak Pulse Current
PPP Peak Pulse Power VC Clamping Voltage
V(BR) Breakdown Voltage I(BR) Breakdown Current for V(BR)
ID Standby Current
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
15,000 W SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
Microsemi
Scottsdale Division
Page 4
Copyright © 2007
10-12-2007 REV G
WWW.Micr
o
semi .COM
SCOTTSDALE DIVISION
PLAD15KP5.0 thru PLAD15KP400CA, e3
PLAD15KP5.0- 400CA, e3
GRAPHS
PPP Peak Pulse Power - kW
tp – Pulse Time – sec
FIGURE 1
Peak Pulse Power vs. Pulse Time to 50% of
Exponentially Decaying Pulse
Peak Pulse Power (PPP) or
continuous Power in Percent of
25oC Rating
TL Lead Temperature oC
Test waveform parameters: tr=10 μs, tp=1000 μs
FIGURE 2 FIGURE 3
Pulse Waveform Derating Curve
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
15,000 W SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
Microsemi
Scottsdale Division
Page 5
Copyright © 2007
10-12-2007 REV G
WWW.Micr
o
semi .COM
SCOTTSDALE DIVISION
PLAD15KP5.0 thru PLAD15KP400CA, e3
PLAD15KP5.0- 400CA, e3
PACKAGE AND MOUNTING PAD DIMENSIONS Inches [mm]
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503