SMCJ5.0(C)A - SMCJ170(C)A SMCJ5.0(C)A - SMCJ170(C)A Features * * * * * * * Glass passivated junction. 1500 W Peak Pulse Power capability on 10/1000 s waveform. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. Typical IR less than 1.0 A above 10V. UL certified, UL #E210467. SMC/DO-214AB COLOR BAND DENOTES CATHODE ON UNIDIRECTIONAL DEVICES ONLY. NO COLOR BAND ON BIDIRECTIONAL DEVICES. DEVICES FOR BIPOLAR APPLICATIONS - Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions. 1500 Watt Transient Voltage Suppressors Absolute Maximum Ratings* Symbol TA = 25C unless otherwise noted Parameter PPPM Peak Pulse Power Dissipation on 10/1000 s waveform IPPM Peak Pulse Current on 10/1000 s waveform IFSM Tstg Non-repetitive Peak Forward Surge Current superimposed on rated load (JEDEC method) Storage Temperature Range TJ Operating Junction Temperature (Note 1) Value Units minimum 1500 W see table A 200 -55 to +150 A C -55 to +150 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum. 2001 Fairchild Semiconductor Corporation SMCJ5.0(C)A-SMCJ170(C)A, Rev. C (continued) Electrical Characteristics Uni-directional Bi-directional (C) Device SMCJ5.0(C)A SMCJ6.0(C)A SMCJ6.5(C)A SMCJ7.0(C)A SMCJ7.5(C)A SMCJ8.0(C)A SMCJ8.5(C)A SMCJ9.0(C)A SMCJ10(C)A SMCJ11(C)A SMCJ12(C)A SMCJ13(C)A SMCJ14(C)A SMCJ15(C)A SMCJ16(C)A SMCJ17(C)A SMCJ18(C)A SMCJ20(C)A SMCJ22(C)A SMCJ24(C)A SMCJ26(C)A SMCJ28(C)A SMCJ30(C)A SMCJ33(C)A SMCJ36(C)A SMCJ40(C)A SMCJ43(C)A SMCJ45(C)A SMCJ48(C)A SMCJ51(C)A SMCJ54(C)A SMCJ58(C)A SMCJ60(C)A SMCJ64(C)A SMCJ70(C)A SMCJ75(C)A SMCJ78(C)A SMCJ85(C)A SMCJ90(C)A SMCJ100(C)A SMCJ110(C)A SMCJ120(C)A SMCJ130(C)A SMCJ150(C)A SMCJ160(C)A SMCJ170(C)A Part Marking* Reverse Stand-off Voltage VRWM (V) GDE GDG GDK(BDK) GDM GDP(BDP) GDR(BDR) GDT(BDT) GDV(BDV) GDX(BDX) GDZ GEE(BEE) GEG GEK(BEK) GEM(BEM) GEP GER GET(BET) GEV(BEV) GEX(BEX) GEZ(BEZ) GFE(BFE) GFG(BFG) GFK(BFK) GFM(BFM) GFP(BFP) GFR(BFR) GFT(BFT) GFV GFX GFZ GGE GGG GGK GGM GGP GGR GGT GGV GGX GGZ GHE GHG GHK GHM GHP GHR 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 TA = 25C unless otherwise noted Breakdown Voltage VBR (V) min max 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100.0 111.0 122.0 133.0 144.0 167.0 178.0 189.0 7.0 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104.0 111.1 123.0 135.0 147.0 159.0 185.0 197.0 209.0 Test Current IT (mA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Max Clamping Max Peak Pulse Voltage @IPPM Surge Current VC (V) IPPM (A) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 163.0 145.6 133.9 125.0 116.3 110.3 104.2 97.4 88.2 82.4 75.3 69.8 64.7 61.5 57.7 54.3 51.4 46.3 42.3 38.6 35.6 33.0 31.0 28.1 25.8 23.3 21.6 20.6 19.4 18.2 17.2 16.0 15.5 14.6 13.3 12.4 11.9 10.9 10.3 9.3 8.5 7.8 7.2 6.2 5.8 5.5 Max Reverse Leakage VRWM IR (uA)** 1000 1000 500 200 100 50 20 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 * Color band denotes cathode on unidirectional devices only. No color band on bidirectional devices. ** For bidirectional parts with VRWM<10V, the IR max limit is doubled. SMCJ5.0(C)A-SMCJ170(C)A, Rev. C SMCJ5.0(C)A - SMCJ170(C)A Transient Voltage Supressors (continued) Typical Characteristics Pulse Derating Curve Peak Pulse Power Rating Curve 100 PULSE POWER (%) PULSE POWER (kW) 100 TA = 25 C 10 1 75 50 25 0 0.1 0.0001 0.001 0.01 0.1 PULSE WIDTH (ms) 1 10 0 25 Pulse Waveform Peak Value Ippm 100 TA = 25 C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of Ipp TA = 25 C f = 1.0 MHz Visg = 50m Vp-p 10000 Half Value-Ipp 2 sec Waveform 10/1000 as Defined by R.E.A. 50 200 Junction Capacitance 20000 CAPACITANCE (pF) sec tf = 10 Measured at Zero Bias 1000 Measured at Stand-Off Voltage (V mw) 100 e-kt td 0 0 1 2 TIME (ms) 3 4 10 1 5 10 50 100 200 400 REVERSE VOLTAGE (V) Non-Repetitive Surge Current 200 FORWARD SURGE CURRENT (A) PEAK PULSE CURRENT (%) 150 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) T A = T Amax 8.3ms Single Half Sine-Wave JEDEC Method 100 50 20 10 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 SMCJ5.0(C)A-SMCJ170(C)A, Rev. C SMCJ5.0(C)A - SMCJ170(C)A Transient Voltage Supressors DO-214AB(SMC) Tape and Reel Data DO-214AB(SMC) Packaging Configuration: Figure 1.0 Packaging Description: DO-214AB(SMC) parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. Alternate carrier tape is made of antistatic plastic. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 7,500 units per 13" or 330cm diameter reel. The reel comes in plastic or carton which is made of polystyrene plastic (anti-static coated) and thick white paper respectively. Further information is described in the Packaging Information table. Antistatic Cover Tape These full reels are individually labeled and placed inside a bleach box (illustrated in figure 1.0) made of recyclable carton paper with a Fairchild logo printing. One box contains two reels maximum. Certain number of these boxes are placed inside shipping box which comes in different sizes depending on the number of parts shipped. Embossed Carrier Tape Human Readable/ Barcode Label Cathode F924 B34 F924 B34 F924 B34 F924 B34 F924 B34 DO-214AB(SMC) unit orientation DO-214AB(SMC) Packaging Information Packaging Option Packaging type Under package code P5 TNR Under package code MA TNR 3,000 3,000 13 13 Qty per Reel/Tube/Bag Reel Size (inch diameter) Box Dimension (mm) 336x336x38 336X336X38 Max qty per Box 6,000 6,000 Weight per unit (gm) 0.210 0.210 Weight per Reel (kg) 1.130 1.130 Human readable label Barcode label Note/Comments Human Readable/Barcode Label (on top) 336mm x 336mm x 38mm Intermediate container for 13" reel option Human Readable Label sample Human readable/barcode Label CAUTION: This container provides protection for static sensitive devices. Handle devices with caution upon removal. MADE IN ONE OR MORE OF THE FOLLOWING COUNTRIES: PHILIPPINES (MACTAN, EXPORT PROCESSING ZONE), MALAYSIA, CHINA, S. KOREA, TAIWAN, THAILAND, SINGAPORE AND JAPAN. I.D. MBRS340 ANTI-STATIC D/C T0012 Lot F63TNR Label sample Qty 3000 CBVK741B019 LOT: CBVK741B019 QTY: 3000 FSID: MBRS340 SPEC: D/C1: T0012 QTY1: SPEC REV: D/C2: QTY2: CPN: FAIRCHILD SEMICONDUCTOR INTERNATIONAL DO-214AB(SMC) Tape Leader and Trailer Configuration: Figure 2.0 (F63TNR)3.2 Carrier Tape Cover Tape Trailer Tape 160mm minimum or (c)2000 Fairchild Semiconductor International Components Leader Tape 390mm minimum July 2000, Rev. A DO-214AB(SMC) Tape and Reel Data, continued DO-214AB(SMC) Embossed Carrier Tape Configuration: Figure 3.0 P0 D0 T E1 F K0 Wc W E2 B0 Tc A0 D1 P1 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 DO-214AB(SMC) (12mm) 6.00 +/-0.15 8.25 +/-0.20 W 16.0 +/-0.3 D0 D1 1.55 +/-0.05 E1 1.125 +/-0.125 1.75 +/-0.10 E2 F P1 P0 10.25 min 7.5 +/-0.05 8.0 +/-0.1 4.0 +/-0.1 K0 T 2.4 +/-0.30 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 0.40 +/-0.10 Tc 13.0 +/-0.3 0.06 +/-0.02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 Wc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) Component Rotation DO-214AB(SMC) Reel Configuration: Figure 4.0 W1 Measured at Hub B Min Dim C Dim A max Dim D min Dim N DETAIL AA See detail AA 13" Diameter Option W2 max Measured at Hub Dimensions are in inches and millimeters Tape Si ze 12mm Reel Option 13" Dia Dim A Dim B 13.0 330 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 Dim N 1.97 50 min Dim W1 0.646 +0.078/-0.000 16.4 +2/-0 Dim W2 0.724 18.4 July 2000, Rev. A DO-214AB(SMC) Package Dimensions DO-214AB(SMC) (FS PKG Code P7) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.21 0.280 (7.112) 0.260 (6.604) 0.128 (3.25) 0.108 (2.743) 2 6.18 5.98 1 0.245 (6.223) 0.220 (5.588) 0.320 (8.128) 0.305 (7.747) 3.27 3.07 + 4.69 4.49 7.67 7.47 0.103 (2.616) 0.079 (2.007) Minimum Recommended Land Pattern 0.012 (0.305) 0.006 (0.152) 0.060 (1.524) 0.030 (0.762) 0.008 (0.203) 0.002 (0.51) (c)2000 Fairchild Semiconductor International August 1999, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM Star* PowerTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM UltraFET VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H1