EP14 Series EP14 * Programmable Crystal Oscillators * HCMOS/TTL Output * +5.0V Supply Voltage * Tri-State and Power Down Options * 4 Pad Plastic SMD Package * RoHS Compliant H 4.7 L 14.0 W 9.8 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range 1.000MHz to 125.000MHz Operating Temperature Range -20C to +70C or -40C to +85C Storage Temperature Range -55C to +125C Supply Voltage (VDD) 5.0VDC 10% Input Current 45mA Maximum (Unloaded) Disable Current (TS Option) 30mA Maximum (Pin 1=Ground) Standby Current (PD Option) 50A Maximum (Pin 1=Ground) Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25C, 100ppm or 50ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration Output Voltage Logic High (VOH) w/TTL Load 2.4VDC Minimum w/CMOS Load VDD-0.4VDC Minimum IOH=-16mA Output Voltage Logic Low (VOL) w/TTL Load or w/CMOS Load 0.4VDC Maximum Rise Time / Fall Time 0.8VDC to 2.0 VDC w/TTL Load 4 nSeconds Max IOH=-16mA IOL=+16mA 20% to 80% of waveform w/CMOS Load Duty Cycle at 1.4VDC w/TTL Load; at 50% of waveform w/CMOS Load 50 10(%) (Standard) at 1.4VDC w/TTL Load (<27.000MHz only), or 50 5(%) (Optional) at 50% of waveform w/CMOS Load (<50.000MHz Only) Load Drive Capability / <50.000MHz 50pF CMOS Load Maximum Output Type-HCMOS >50.000MHz 15pF CMOS Load Maximum Load Drive Capability / <40.000MHz 10TTL Load Maximum Output Type-TTL >40.000MHz 5TTL Load Maximum Output Control Function TS Tri-State PD Power Down Output Control Function Input Voltage VIH: No Connection or 2.0VDC Enables Output VIL: (TS Option) <0.8VDC Disable Output: High Impedence VIL: (PD Option) <0.8VDC Disable Output: Logic Low 5ppm / year Maximum Aging (at 25C) 10 mSeconds Maximum Start Up Time Period Jitter: Absolute Period Jitter: One Sigma <33.000MHz 250pSec Maximum, 100pSec Typical >33.000MHz 100pSec Maximum, 50pSec Typical <33.000MHz 50pSec Maximum >33.000MHz 30pSec Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EP14 PLASTIC 5.0V OS49 10/09 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EP14 00 SJ ET T TS L - 24.000M TR FREQUENCY TOLERANCE / STABILITY 00=100ppm Maximum 45=50ppm Maximum AVAILABLE OPTIONS Blank=Bulk TR=Tape & Reel OPERATING TEMP. RANGE Blank=-20C to +70C ET=-40C to +85C FREQUENCY OUTPUT TYPE L=TTL, C=CMOS DUTY CYCLE Blank=50 10(%) T=50 5(%) OUTPUT CONTROL FUNCTION TS=Tri-State, PD=Power Down MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State or Power Down Pin 2: Case Ground Pin 3: Output Pin 4: Supply Voltage Tolerances = 0.1 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS A B C D E 24 .3 11.5 .1 10.75 .1 4 .2 2.1 TAPE F 12 .2 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13.2 40 MIN QTY/REEL 1000 REEL G H J K L R S T U V B0* 1.5 +.1-0 A0* .3 .1 K0* 2.5 MIN 10 MIN 30.4 MAX 360 MAX 24.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Characteristic Specification Line 1: ECLIPTEK Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: P XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Configuration Designator MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EP14 PLASTIC 5.0V OS49 10/09 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.