{). GENERAL . 0 SEMICONDUCTOR ae wa ore a DO-204AL (DO-41 Glass) ZPY1 thru ZPY100 Zener Diodes Vz Range 1.0, 3.9 to 100V Power Dissipation 1.3W nn 4 x] i=] Q ~ ao [= cy La) Features min. 1.102 (28.0) *| | max. S{.102 (2.6) i _- Cathode UC At Mark max. .161 (4.1) Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with high power rating. * The Zener voltages are graded according to the international E 12 standard. Smaller voltage i tolerances are available upon request. These diodes are also available in the MELF case with the type designation ZMY10 ... ZMY100. Mechanical Data min. 1.102 (28.0) max. 210.034 (0.86) Case: DO-41 Glass Case Weight: approx. 0.35g Packaging Codes/Options: D9/5K per 13 reel (52mm tape), 10K/box | E1/5K per Ammo mag. (52 mm tape), 10K/box Dimensions in inches and (millimeters) Maximum Ratings and Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. Parameter Symbol Value Unit Zener Current (see Table Characteristics) Power Dissipation at Tamb = 25C Ptot 1.3 Ww Thermal Resistance Junction to Ambient Air Reva 130" C Junction Temperature Tj 175 C Storage Temperature Range Ts 55 to +175 C Note: (1) Valid provided that leads at a distance of 10mm from case are kept at ambient temperature 183 9/7/00 GENERAL Ee Sec ONDUCTOR ZPY1 thru ZPY100 Zener Diodes Electrical Cc haracteristics Ratings at 25C ambient temperature unless otherwise specified. Temp. Coeff. of Reverse Admissible Voltage) Dynamic Resistance | Zener Voltage at Izt Voltage Zener current) Type at Izt Vz (V) at Izt yz (1070) Test current at at t= 1 kHz In =0.5 pA Tamb = 25C Min Max rz (Q) Min Max lzt (mA) Var (V) iz (mA) zPy1@ 0.65 0.75 6.5 (< 8) ~26 - 23 5 - 580 ZPY3.9 3.7 4d 4(<7) -7 +2 100 - 290 ZPY4.3 4.0 4.6 4(<?) -7 43 100 - 260 ZPY47 44 5.0 4(<7) -7 +4 100 - 235 ZPY5.1 48 5.4 2 (<5) -6 45 400 >O7 215 ZPY5.6 5.2 6.0 1 (<2) -3 +5 100 > 1.5 193 ZPY6.2 5.8 6.6 1 (<2) -1 +6 100 > 2.0 183 ZPY6.8 6.4 7.2 1 (<2) 0 +7 100 >3.0 157 ZPY7.5 74 7.9 1 (<2) 0 +7 100 > 5.0 143 Z2PY8.2 77 8.7 1 (<2) +3 +8 100 > 6.0 127 ZPY9.1 8.5 9.6 2 (< 4) +3 +8 50 >7.0 117 ZPY10 9.41 10.6 2 (<4) +56 +9 50 >7.6 105 ZPY11 10.4 11.6 3 (<7) +5 +10 50 > 8.5 94 ZPY12 1.4 12.7 3 (<7) +5 +10 50 >9.0 85 ZPY13 12.4 14.1 4 (<9) +5 +10 50 > 10 78 ZPY15 13.8 15.8 4 (<9) +5 +10 50 oH 70 ZPY16 15.3 174 5 (< 10) +7 +1 25 >12 63 ZPY18 16.8 19.1 5 (< 11) +7 +11 25 >14 57 ZPY20 18.8 21.2 6 (< 12) +7 +i 25 >15 52 ZPY22 20.8 23.3 7 (< 13) +7 +11 25 >17 48 ZPY24 22.8 25.6 8 (< 14) +7 +12 25 >18 42 ZPY27 25.1 28.9 9 (< 15) +7 412 25 > 20 38 ZPY30 28 32 10 (< 20) +7 +12 25 > 22.5 35 ZPY33 31 35 11 ( 20) +7 +12 25 > 25 31 ZPY36 34 38 25 (< 60) +7 412 10 > 27 29 ZPY39 37 4 30 (< 60) +8 +12 10 > 29 26 ZPY43 40 46 35 (< 80) +8 +13 10 > 32 24 ZPY47 44 50 40 (< 80) +8 +13 10 > 36 22 ZPY51 48 54 45 (< 100) +8 +13 10 > 38 20 ZPY56 52 60 50 (< 100) +8 +13 10 > 42 18 ZPY62 58 66 60 {< 130} +8 +13 10 >47 16 ZPY68 64 72 65 (< 130) +8 +13 10 > 51 14 ZPY75 70 79 70 (< 160) +8 +13 10 > 56 13 ZPY82 77 88 80 (< 160} +8 +13 10 >61 12 ZPY91 85 96 120 (< 250) +9 +13 5 > 68 W ZPY100 94 106 130 (< 250) +9 +13 5 > 75 10 Notes: (1) Valid provided that leads are kept at ambient temperature at a distance of 10 mm from case (2) Tested with pulses tp = 5 ms (3) The ZPY1 is a silicon diode operated in forward direction. Hence, the index of all characteristics and maximum ratings should be F instead of Z Connect the cathode terminal to the negative pole For devices in glass case DO-41 with higher Zener voltage but same power dissipation see types ZPU100 ... ZPU180 184 GP Semicon ZPY1 thru ZPY100 SEMICONDUCTOR Zener Diodes td Lo aj i] i - o i CY La) Ratings and Characteristic Curves (Ta = 25C unless otherwise noted) Breakdown characteristics Tj = constant (puised) Breakdown characteristics T,= constant (pulsed) ZPY... 3 185 GENERAL Ee Sm CONDUCTOR ZPY1 thru ZPY100 Zener Diodes Ratings and Characteristic Curves (Ta = 25C unless otherwise noted) Breakdown characteristics T= constant (pulsed) mA ZPY... 20 va 10 0 Admissible power dissipation Pulse thermal resistance versus ambient temperature versus pulse duration provided ambient temperature Valid provided that leads are Weld provided thet ieace are rept at comblork vernperetare eta dietence of 10 rn from case Ww 2PY... Ciw 2PY... 2 10 Sina 107 5 4 a 2 10 6 4 3 2 1 4 2 1 0 100 200C 10 10 10 10? 10 1 10s * Tomb tp 186 GENERAL Ee CONDUCTOR ZPY1 thru ZPY100 Zener Diodes Zener Diodes Ratings and Characteristic Curves cr - 25c uniess otherwise noted) Dynamic resistance Dynamic resistance versus Zener current versus Zener current Q ZPY... 10 a 10? ZPY100 ZPY8&2 ZPY68 ZPY56 ZPY43 yn 8 ae 10 ey & ae 4 1 2365s 710 2 34s 100mMA 01 2 3465 1 2 345 10mA te 5 --93 & Dynamic resistance Thermal resistance versus Zener current versus lead length 1 23445 10 2 345 100mA 0 5 10 15 20 mm lead length / 187