LM340/LM78MXX Series
3-Terminal Positive Regulators
General Description
The LM140/LM340A/LM340/LM7800C monolithic 3-terminal
positive voltage regulators employ internal current-limiting,
thermal shutdown and safe-area compensation, making
them essentially indestructible. If adequate heat sinking is
provided, they can deliver over 1.0Aoutput current. They are
intended as fixed voltage regulators in a wide range of appli-
cations including local (on-card) regulation for elimination of
noise and distribution problems associated with single-point
regulation. In addition to use as fixed voltage regulators,
these devices can be used with external components to ob-
tain adjustable output voltages and currents.
Considerable effort was expended to make the entire series
of regulators easy to use and minimize the number of exter-
nal components. It is not necessary to bypass the output, al-
though this does improve transient response. Input bypass-
ing is needed only if the regulator is located far from the filter
capacitor of the power supply.
The 5V, 12V, and 15V regulator options are available in the
steel TO-3 power package. The LM340A/LM340/LM7800C
series is available in the TO-220 plastic power package, and
the LM340-5.0 is available in the SOT-223 package, as well
as the LM340-5.0 and LM340-12 in the surface-mount
TO-263 package.
Features
nComplete specifications at 1A load
nOutput voltage tolerances of ±2% at T
j
= 25˚C and ±4%
over the temperature range (LM340A)
nLine regulation of 0.01% of V
OUT
/V of V
IN
at 1A load
(LM340A)
nLoad regulation of 0.3% of V
OUT
/A (LM340A)
nInternal thermal overload protection
nInternal short-circuit current limit
nOutput transistor safe area protection
nP
+
Product Enhancement tested
Device Output
Voltages Packages
LM140 5, 12,
15 TO-3 (K)
LM340A/LM340 5, 12,
15 TO-3 (K), TO-220 (T),
SOT-223 (MP), TO-263 (S)
(5V and 12V only)
LM7800C 5, 8, 12,
15 TO-220 (T)
Typical Applications
Fixed Output Regulator
DS007781-1
*Required if the regulator is located far from the power supply filter.
**Although no output capacitor is needed for stability, it does help transient
response. (If needed, use 0.1 µF, ceramic disc).
Adjustable Output Regulator
DS007781-2
VOUT = 5V + (5V/R1 + IQ) R2 5V/R1 >3I
Q
,
load regulation (Lr)[(R1 + R2)/R1] (Lrof LM340-5).
Current Regulator
DS007781-3
IQ= 1.3 mA over line and load changes.
Comparison between SOT-223 and D-Pak (TO-252)
Packages
DS007781-38
Scale 1:1
February 2000
LM340/LM78MXX Series 3-Terminal Positive Regulators
© 2000 National Semiconductor Corporation DS007781 www.national.com
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
(Note 5)
DC Input Voltage
All Devices except
LM7824/LM7824C 35V
LM7824/LM7824C 40V
Internal Power Dissipation (Note 2) Internally Limited
Maximum Junction Temperature 150˚C
Storage Temperature Range −65˚C to +150˚C
Lead Temperature (Soldering, 10 sec.)
TO-3 Package (K) 300˚C
TO-220 Package (T), TO-263
Package (S) 230˚C
ESD Susceptibility (Note 3) 2 kV
Operating Conditions (Note 1)
Temperature Range (T
A
) (Note 2)
LM140A, LM140 −55˚C to +125˚C
LM340A, LM340, LM7805C,
LM7812C, LM7815C, LM7808C 0˚C to +125˚C
LM340A
Electrical Characteristics
I
OUT
= 1A, −55˚C T
J
+150˚C (LM140A), or 0˚C T
J
+ 125˚C (LM340A) unless otherwise specified (Note 4)
Output Voltage 5V 12V 15V
Symbol Input Voltage (unless otherwise noted) 10V 19V 23V Units
Parameter Conditions Min Typ Max Min Typ Max Min Typ Max
VOOutput Voltage TJ= 25˚C 4.9 5 5.1 11.75 12 12.25 14.7 15 15.3 V
PD15W, 5 mA IO1A 4.8 5.2 11.5 12.5 14.4 15.6 V
VMIN VIN VMAX (7.5 VIN 20) (14.8 VIN 27) (17.9 VIN 30) V
VOLine Regulation IO= 500 mA 10 18 22 mV
VIN (7.5 VIN 20) (14.8 VIN 27) (17.9 VIN 30) V
TJ= 25˚C 3 10 4 18 4 22 mV
VIN (7.5 VIN 20) (14.5 VIN 27) (17.5 VIN 30) V
TJ= 25˚C 4 9 10 mV
Over Temperature 12 30 30 mV
VIN (8 VIN 12) (16 VIN 22) (20 VIN 26) V
VOLoad Regulation TJ= 25˚C 5 mA IO1.5A 10 25 12 32 12 35 mV
250 mA IO750 mA 15 19 21 mV
Over Temperature, 25 60 75 mV
5mAI
O1A
IQQuiescent Current TJ= 25˚C 6 6 6 mA
Over Temperature 6.5 6.5 6.5 mA
IQQuiescent Current 5 mA IO1A 0.5 0.5 0.5 mA
Change TJ= 25˚C, IO= 1A 0.8 0.8 0.8 mA
VMIN VIN VMAX (7.5 VIN 20) (14.8 VIN 27) (17.9 VIN 30) V
IO= 500 mA 0.8 0.8 0.8 mA
VMIN VIN VMAX (8 VIN 25) (15 VIN 30) (17.9 VIN 30) V
VNOutput Noise Voltage TA= 25˚C, 10 Hz f100 kHz 40 75 90 µV
Ripple Rejection TJ= 25˚C, f = 120 Hz, IO=1A 68 80 61 72 60 70 dB
or f = 120 Hz, IO= 500 mA, 68 61 60 dB
Over Temperature,
VMIN VIN VMAX (8 VIN 18) (15 VIN 25) (18.5 VIN 28.5) V
RODropout Voltage TJ= 25˚C, IO= 1A 2.0 2.0 2.0 V
Output Resistance f = 1 kHz 8 18 19 m
Short-Circuit Current TJ= 25˚C 2.1 1.5 1.2 A
Peak Output Current TJ= 25˚C 2.4 2.4 2.4 A
Average TC of VOMin, TJ= 0˚C, IO= 5 mA −0.6 −1.5 −1.8 mV/˚C
VIN Input Voltage TJ= 25˚C
Required to Maintain 7.5 14.5 17.5 V
Line Regulation
LM340/LM78MXX
www.national.com 2
LM140
Electrical Characteristics (Note 4)
−55˚C T
J
+150˚C unless otherwise specified
Output Voltage 5V 12V 15V
Symbol Input Voltage (unless otherwise noted) 10V 19V 23V Units
Parameter Conditions Min Typ Max Min Typ Max Min Typ Max
VOOutput Voltage TJ= 25˚C, 5 mA IO1A 4.8 5 5.2 11.5 12 12.5 14.4 15 15.6 V
PD15W, 5 mA IO1A 4.75 5.25 11.4 12.6 14.25 15.75 V
VMIN VIN VMAX (8 VIN 20) (15.5 VIN 27) (18.5 VIN 30) V
VOLine Regulation IO= 500 mA TJ= 25˚C 3 50 4 120 4 150 mV
VIN (7 VIN 25) (14.5 VIN 30) (17.5 VIN 30) V
−55˚C TJ+150˚C 50 120 150 mV
VIN (8 VIN 20) (15 VIN 27) (18.5 VIN 30) V
IO1A TJ= 25˚C 50 120 150 mV
VIN (7.5 VIN 20) (14.6 VIN 27) (17.7 VIN 30) V
−55˚C TJ+150˚C 25 60 75 mV
VIN (8 VIN 12) (16 VIN 22) (20 VIN 26) V
VOLoad Regulation TJ= 25˚C 5 mA IO1.5A 10 50 12 120 12 150 mV
250 mA IP750 mA 25 60 75 mV
−55˚C TJ+150˚C, 50 120 150 mV
5mAI
O1A
IQQuiescent Current IO1A TJ= 25˚C 6 6 6 mA
−55˚C TJ+150˚C 7 7 7 mA
IQQuiescent Current 5 mA IO1A 0.5 0.5 0.5 mA
Change TJ= 25˚C, IO1A 0.8 0.8 0.8 mA
VMIN VIN VMAX (8 VIN 20) (15 VIN 27) (18.5 VIN 30) V
IO= 500 mA, −55˚C TJ+150˚C 0.8 0.8 0.8 mA
VMIN VIN VMAX (8 VIN 25) (15 VIN 30) (18.5 VIN 30) V
VNOutput Noise Voltage TA= 25˚C, 10 Hz f100 kHz 40 75 90 µV
Ripple Rejection IO1A, TJ= 25˚C or 68 80 61 72 60 70 dB
f = 120 Hz IO500 mA, 68 61 60 dB
−55˚C TJ+150˚C
VMIN VIN VMAX (8 VIN 18) (15 VIN 25) (18.5 VIN 28.5) V
RODropout Voltage TJ= 25˚C, IO= 1A 2.0 2.0 2.0 V
Output Resistance f = 1 kHz 8 18 19 m
Short-Circuit Current TJ= 25˚C 2.1 1.5 1.2 A
Peak Output Current TJ= 25˚C 2.4 2.4 2.4 A
Average TC of VOUT 0˚C TJ+150˚C, IO= 5 mA −0.6 −1.5 −1.8 mV/˚C
VIN Input Voltage TJ= 25˚C, IO1A
Required to Maintain 7.5 14.6 17.7 V
Line Regulation
LM340/LM78MXX
www.national.com3
LM340/LM7800C
Electrical Characteristics (Note 4)
0˚C T
J
+125˚C unless otherwise specified
Output Voltage 5V 12V 15V
Symbol Input Voltage (unless otherwise noted) 10V 19V 23V Units
Parameter Conditions Min Typ Max Min Typ Max Min Typ Max
VOOutput Voltage TJ= 25˚C, 5 mA IO1A 4.8 5 5.2 11.5 12 12.5 14.4 15 15.6 V
PD15W, 5 mA IO1A 4.75 5.25 11.4 12.6 14.25 15.75 V
VMIN VIN VMAX (7.5 VIN 20) (14.5 VIN 27) (17.5 VIN 30) V
VOLine Regulation IO= 500 mA TJ= 25˚C 3 50 4 120 4 150 mV
VIN (7 VIN 25) (14.5 VIN 30) (17.5 VIN 30) V
0˚C TJ+125˚C 50 120 150 mV
VIN (8 VIN 20) (15 VIN 27) (18.5 VIN 30) V
IO1A TJ= 25˚C 50 120 150 mV
VIN (7.5 VIN 20) (14.6 VIN 27) (17.7 VIN 30) V
0˚C TJ+125˚C 25 60 75 mV
VIN (8 VIN 12) (16 VIN 22) (20 VIN 26) V
VOLoad Regulation TJ= 25˚C 5 mA IO1.5A 10 50 12 120 12 150 mV
250 mA IO750 mA 25 60 75 mV
5mAI
O1A, 0˚C TJ+125˚C 50 120 150 mV
IQQuiescent Current IO1A TJ= 25˚C 8 8 8 mA
0˚C TJ+125˚C 8.5 8.5 8.5 mA
IQQuiescent Current 5 mA IO1A 0.5 0.5 0.5 mA
Change TJ= 25˚C, IO1A 1.0 1.0 1.0 mA
VMIN VIN VMAX (7.5 VIN 20) (14.8 VIN 27) (17.9 VIN 30) V
IO500 mA, 0˚C TJ+125˚C 1.0 1.0 1.0 mA
VMIN VIN VMAX (7 VIN 25) (14.5 VIN 30) (17.5 VIN 30) V
VNOutput Noise Voltage TA= 25˚C, 10 Hz f100 kHz 40 75 90 µV
Ripple Rejection IO1A, TJ= 25˚C 62 80 55 72 54 70 dB
f = 120 Hz or IO500 mA, 62 55 54 dB
0˚C TJ+125˚C
VMIN VIN VMAX (8 VIN 18) (15 VIN 25) (18.5 VIN
28.5) V
RODropout Voltage TJ= 25˚C, IO= 1A 2.0 2.0 2.0 V
Output Resistance f = 1 kHz 8 18 19 m
Short-Circuit Current TJ= 25˚C 2.1 1.5 1.2 A
Peak Output Current TJ= 25˚C 2.4 2.4 2.4 A
Average TC of VOUT 0˚C TJ+125˚C, IO= 5 mA −0.6 −1.5 −1.8 mV/˚C
VIN Input Voltage TJ= 25˚C, IO1A
Required to Maintain 7.5 14.6 17.7 V
Line Regulation
Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions
but the specifications might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics.
Note 2: The maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TJMAX = 125˚C or
150˚C), the junction-to-ambient thermal resistance (θJA), and the ambient temperature (TA). PDMAX =(T
JMAX −T
A
)/θJA. If this dissipation is exceeded, the die tem-
perature will rise above TJMAX and the electrical specifications do not apply. If the die temperature rises above 150˚C, the device will go into thermal shutdown. For
the TO-3 package (K, KC), the junction-to-ambient thermal resistance (θJA) is 39˚C/W. When using a heatsink, θJA is the sum of the 4˚C/W junction-to-case thermal
resistance (θJC) of the TO-3 package and the case-to-ambient thermal resistance of the heatsink. For the TO-220 package (T), θJA is 54˚C/W and θJC is 4˚C/W. If
SOT-223 is used, the junction-to-ambient thermal resistance is 174˚C/W and can be reduced by a heatsink (see Applications Hints on heatsinking).
If the TO-263 package is used, the thermal resistance can be reduced by increasing the PC board copper area thermally connected to the package: Using 0.5 square
inches of copper area, θJA is 50˚C/W; with 1 square inch of copper area, θJAis 37˚C/W; and with 1.6 or more inches of copper area, θJA is 32˚C/W.
Note 3: ESD rating is based on the human body model, 100 pF discharged through 1.5 k.
Note 4: All characteristics are measured with a 0.22 µF capacitor from input to ground and a 0.1 µF capacitor from output to ground. All characteristics except noise
voltage and ripple rejection ratio are measured using pulse techniques (tw10 ms, duty cycle 5%). Output voltage changes due to changes in internal temperature
must be taken into account separately.
Note 5: A military RETS specification is available on request. At the time of printing, the military RETS specifications for the LM140AK-5.0/883, LM140AK-12/883,
and LM140AK-15/883 complied with the min and max limits for the respective versions of the LM140A. At the time of printing, the military RETS specifications for
the LM140K-5.0/883, LM140K-12/883, and LM140K-15/883 complied with the min and max limits for the respective versions of the LM140. The LM140H/883,
LM140K/883, and LM140AK/883 may also be procured as a Standard Military Drawing.
LM340/LM78MXX
www.national.com 4
LM7808C
Electrical Characteristics
0˚C T
J
+150˚C, V
I
= 14V, I
O
= 500 mA, C
I
= 0.33 µF, C
O
= 0.1 µF, unless otherwise specified
Symbol Parameter Conditions (Note 6) LM7808C Units
Min Typ Max
V
O
Output Voltage T
J
= 25˚C 7.7 8.0 8.3 V
V
O
Line Regulation T
J
= 25˚C 10.5V V
I
25V 6.0 160 mV
11.0V V
I
17V 2.0 80
V
O
Load Regulation T
J
= 25˚C 5.0 mA I
O
1.5A 12 160 mV
250 mA I
O
750
mA 4.0 80
V
O
Output Voltage 11.5V V
I
23V, 5.0 mA I
O
1.0A, P 15W 7.6 8.4 V
I
Q
Quiescent
Current T
J
= 25˚C 4.3 8.0 mA
I
Q
Quiescent With Line 11.5V V
I
25V 1.0 mA
Current Change With
Load 5.0 mA I
O
1.0A 0.5
V
N
Noise T
A
= 25˚C, 10 Hz f100 kHz 52 µV
V
I
/V
O
Ripple Rejection f = 120 Hz, I
O
= 350 mA, T
J
= 25˚C 56 72 dB
V
DO
Dropout Voltage I
O
= 1.0A, T
J
= 25˚C 2.0 V
R
O
Output Resistance f = 1.0 kHz 16 m
I
OS
Output Short Circuit Current T
J
= 25˚C, V
I
= 35V 0.45 A
I
PK
Peak Output Current T
J
= 25˚C 2.2 A
V
O
/T Average Temperature I
O
= 5.0 mA 0.8 mV/˚C
Coefficient of Output Voltage
Note 6: All characteristics are measured with a 0.22 µF capacitor from input to ground and a 0.1 µF capacitor from output to ground. All characteristics except noise
voltage and ripple rejection ratio are measured using pulse techniques (tw10 ms, duty cycle 5%). Output voltage changes due to changes in internal temperature
must be taken into account separately.
Typical Performance Characteristics
Maximum Average Power
Dissipation
DS007781-22
Maximum Average Power
Dissipation
DS007781-23
Maximum Power
Dissipation (TO-263)
(See Note 2)
DS007781-24
LM340/LM78MXX
www.national.com5
Typical Performance Characteristics (Continued)
Output Voltage (Normalized
to 1V at T
j
= 25˚C)
DS007781-25
Note: Shaded area refers to LM340A/LM340,
LM7805C, LM7812C and LM7815C.
Ripple Rejection
DS007781-26
Ripple Rejection
DS007781-27
Output Impedance
DS007781-28
Dropout Characteristics
DS007781-29
Quiescent Current
DS007781-30
Note: Shaded area refers to LM340A/LM340,
LM7805C, LM7812C and LM7815C.
Peak Output Current
DS007781-31
Dropout Voltage
DS007781-32
Note: Shaded area refers to LM340A/LM340,
LM7805C, LM7812C and LM7815C.
Quiescent Current
DS007781-33
LM340/LM78MXX
www.national.com 6
Typical Performance Characteristics (Continued)
Equivalent Schematic
Application Hints
The LM340/LM78XX series is designed with thermal protec-
tion, output short-circuit protection and output transistor safe
area protection. However, as with
any
IC regulator, it be-
comes necessary to take precautions to assure that the
regulator is not inadvertently damaged. The following de-
scribes possible misapplications and methods to prevent
damage to the regulator.
Shorting the Regulator Input: When using large capacitors
at the output of these regulators, a protection diode con-
nected input to output (
Figure 1
) may be required if the input
is shorted to ground. Without the protection diode, an input
short will cause the input to rapidly approach ground poten-
tial, while the output remains near the initial V
OUT
because of
the stored charge in the large output capacitor. The capacitor
will then discharge through a large internal input to output di-
ode and parasitic transistors. If the energy released by the
capacitor is large enough, this diode, low current metal and
the regulator will be destroyed. The fast diode in
Figure 1
will
shunt most of the capacitors discharge current around the
regulator. Generally no protection diode is required for val-
ues of output capacitance 10 µF.
Raising the Output Voltage above the Input Voltage:
Since the output of the device does not sink current, forcing
Line Regulation
140AK-5.0, I
OUT
= 1A, T
A
= 25˚C
DS007781-5
Line Regulation
140AK-5.0, V
IN
= 10V, T
A
= 25˚C
DS007781-6
DS007781-7
LM340/LM78MXX
www.national.com7
Application Hints (Continued)
the output high can cause damage to internal low current
paths in a manner similar to that just described in the “Short-
ing the Regulator Input” section.
Regulator Floating Ground (
Figure 2
): When the ground
pin alone becomes disconnected, the output approaches the
unregulated input, causing possible damage to other circuits
connected to V
OUT
. If ground is reconnected with power
“ON”, damage may also occur to the regulator. This fault is
most likely to occur when plugging in regulators or modules
with on card regulators into powered up sockets. Power
should be turned off first, thermal limit ceases operating, or
ground should be connected first if power must be left on.
Transient Voltages: If transients exceed the maximum
rated input voltage of the device, or reach more than 0.8V
below ground and have sufficient energy, they will damage
the regulator. The solution is to use a large input capacitor, a
series input breakdown diode, a choke, a transient suppres-
sor or a combination of these.
When a value for θ
(H–A)
is found using the equation shown,
a heatsink must be selected that has
a value that is less than
or equal to this number.
θ
(H–A)
is specified numerically by the heatsink manufacturer
in this catalog, or shown in a curve that plots temperature
rise vs power dissipation for the heatsink.
HEATSINKING TO-263 AND SOT-223 PACKAGE PARTS
Both the TO-263 (“S”) and SOT-223 (“MP”) packages use a
copper plane on the PCB and the PCB itself as a heatsink.
To optimize the heat sinking ability of the plane and PCB,
solder the tab of the plane.
shows for the TO-263 the measured values of θ
(J–A)
for dif-
ferent copper area sizes using a typical PCB with 1 ounce
copper
and no solder mask over the copper area used for
heatsinking
.
As shown in the figure, increasing the copper area beyond 1
square inch produces very little improvement. It should also
be observed that the minimum value of θ
(J–A)
for the TO-263
package mounted to a PCB is 32˚C/W.
As a design aid,
Figure 5
shows the maximum allowable
power dissipation compared to ambient temperature for the
TO-263 device (assuming θ
(J–A)
is 35˚C/W and the maxi-
mum junction temperature is 125˚C).
DS007781-8
FIGURE 1. Input Short
DS007781-9
FIGURE 2. Regulator Floating Ground
DS007781-10
FIGURE 3. Transients
DS007781-39
FIGURE 4. θ
(J–A)
vs Copper (1 ounce)
Area for the TO-263 Package
DS007781-40
FIGURE 5. Maximum Power Dissipation vs
T
AMB
for the TO-263 Package
LM340/LM78MXX
www.national.com 8
Application Hints (Continued)
Figures 6, 7
show the information for the SOT-223 package.
Figure 6
assumes a θ
(J–A)
of 74˚C/W for 1 ounce copper and
51˚C/W for 2 ounce copper and a maximum junction tem-
perature of 125˚C.
Please see AN-1028 for power enhancement techniques to
be used with the SOT-223 package.
Typical Applications
DS007781-41
FIGURE 6. θ
(J–A)
vs Copper (2 ounce) Area
for the SOT-223 Package
DS007781-42
FIGURE 7. Maximum Power Dissipation vs
T
AMB
for the SOT-223 Package
Fixed Output Regulator
DS007781-13
Note: Bypass capacitors are recommended for optimum stability and
transient response, and should be located as close as possible to the
regulator.
High Input Voltage Circuits
DS007781-14
DS007781-15
LM340/LM78MXX
www.national.com9
Typical Applications (Continued)
High Current Voltage Regulator
DS007781-16
High Output Current, Short Circuit Protected
DS007781-17
Positive and Negative Regulator
DS007781-18
LM340/LM78MXX
www.national.com 10
Connection Diagrams and Ordering Information
The specifications for the LM140H/883 devices are not contained in this datasheet. If specifications for these devices
are required, contact the National Semiconductor Sales Office/Distributors.
TO-3 Metal Can Package (K)
DS007781-11
Bottom View
Steel Package Order Numbers:
LM140K-5.0 LM140K-12 LM140K-15
LM340K-12 LM340K-15
LM340K-5.0
See Package Number K02A
LM140K-5.0/883 LM140K-12/883 LM140K-15/883
See Package Number K02C
TO-220 Power Package (T)
DS007781-12
Top View
Plastic Package Order Numbers:
LM340AT-5.0 LM340T-5.0
LM340T-12 LM340T-15
LM7805CT LM7812CT
LM7815CT LM7808CT
See Package Number T03B
TO-39 Metal Can Package (H)
DS007781-19
Top View
Metal Can Order Numbers:
LM140H-5.0/883 LM140H-6.0/883
LM140H-8.0/883 LM140H-12/883
LM140H-15/883 LM140H-24/883
See Package Number H03A
TO-263 Surface-Mount Package (S)
DS007781-20
Top View
DS007781-21
Side View
Surface-Mount Package Order Numbers:
LM340S-5.0 LM340S-12
See Package Number TS3B
3-Lead SOT-223
(Front View)
Order Number LM340MP-5.0
Package Marked NO0A
See Package Number MA04A
DS007781-43
LM340/LM78MXX
www.national.com11
Physical Dimensions inches (millimeters) unless otherwise noted
TO-3 Metal Can Package (K)
Order Number LM140K-5.0, LM340K-5.0, LM140K-12, LM340K-12,
LM140K-15, LM340K-15, LM7806CK, LM7808CK, LM7818CK or LM7824CK
NS Package Number K02A
TO-3 Metal Can Package (K)
Mil-Aero Products
Order Number LM140K-5.0/883, LM140K-12/883, or LM140K-15/883
NS Package Number K02C
LM340/LM78MXX
www.national.com 12
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
TO-263 Surface-Mount Package (S)
Order Number LM340S-5.0 or LM340S-12
NS Package Number TS3B
LM340/LM78MXX
www.national.com13
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
TO-220 Power Package (T)
Order Number LM340AT/LM340T-5.0, LM340AT/LM340T-12, LM340AT/LM340T-15,
LM7805CT, LM7812CT, LM7815CT, LM7806CT, LM7808CT, LM7818CT or LM7824CT
NS Package Number T03B
LM340/LM78MXX
www.national.com 14
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
National Semiconductor
Europe Fax: +49 (0) 180-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: ap.support@nsc.com
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
www.national.com
3-Lead SOT-223 Package
Order Part Number LM340MP-5.0
NS Package Number MA04A
LM340/LM78MXX Series 3-Terminal Positive Regulators
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
1 of 6
National Semiconductor Company
Design Purchasing Quality Company Jobs
Products > Analog - Regulators > Linear Regulators - Standard/NPN > Positive Voltage - Fixed > LM340
Product Folder
LM340 Series 3-Terminal Positive Regulators
Generic P/N 340
Contents
lGeneral Description
lFeatures
lDatasheet
lPackage Availability, Models, Samples
& Pricing
lApplication Notes
Parametric Table
Multiple Output Capability No
On/Off Pin No
Input Voltage, min (Volt) 7.50,14.60
Input Voltage, max (Volt) 35
Output Current, max 1 Amp
Output Voltage (Volt) 5,12
General Description
The LM140/LM340A/LM340/LM7800C monolithic 3-terminal positive voltage regulators
employ internal current-limiting, thermal shutdown and safe-area compensation, making
them essentially indestructible. If adequate heat sinking is provided, they can deliver over
1.0A output current. They are intended as fixed voltage regulators in a wide range of
applications including local (on-card) regulation for elimination of noise and distribution
problems associated with single-point regulation. In addition to use as fixed voltage
regulators, these devices can be used with external components to obtain adjustable output
voltages and currents.
Considerable effort was expended to make the entire series of regulators easy to use and
2 of 6
minimize the number of external components. It is not necessary to bypass the output,
although this does improve transient response. Input bypassing is needed only if the
regulator is located far from the filter capacitor of the power supply.
The 5V, 12V, and 15V regulator options are available in the steel TO-3 power package. The
LM340A/LM340/LM7800C series is available in the TO-220 plastic power package, and the
LM340-5.0 is available in the SOT-223 package, as well as the LM340-5.0 and LM340-12
in the surface-mount TO-263 package.
Features
lComplete specifications at 1A load
lOutput voltage tolerances of ±2% at Tj = 25°C and ±4% over the temperature range
(LM340A)
lLine regulation of 0.01% of VOUT/V of [Delta]VIN at 1A load (LM340A)
lLoad regulation of 0.3% of VOUT/A (LM340A)
lInternal thermal overload protection
lInternal short-circuit current limit
lOutput transistor safe area protection
lP+ Product Enhancement tested
Device OutputVoltages Packages
LM140 5, 12, 15 TO-3 (K)
LM340A/LM340 5, 12, 15 TO-3 (K), TO-220 (T), SOT-223 (MP), TO-263 (S)
(5V and 12V only)
LM7800C 5, 8, 12, 15 TO-220 (T)
Datasheet
3 of 6
Title Size
(in Kbytes) Date View Online Download Receive via Email
LM340/LM78MXX Series 3-Terminal Positive Regulators 514 Kbytes 16-Mar-00 View Online Download Receive via Email
Please use Adobe Acrobat to view PDF file(s).
If you have trouble printing, see Printing Problems.
Package Availability, Models, Samples & Pricing
Part Number Package Status Models Samples
&
Electronic
Orders
Budgetary Pricing Std
Pack
Size
Package
Marking
Type # pins SPICE IBIS Quantity $US each
LM340MP-5.0 SOT-223 4Full production N/A N/A Samples
Order Parts
1K+ $0.3300 reel
of
1000
¢2¢T
N00A
LM340MPX-5.0 SOT-223 4Full production N/A N/A .
Order Parts
1K+ $0.3300 reel
of
2000
¢2¢T
N00A
LM340AT-5.0 TO-220 3Full production N/A N/A .
Order Parts
1K+ $0.8000 tube
of
45
[logo]¢U¢Z¢2¢T
LM340AT
5.0 P+
LM340T-12 TO-220 3Full production N/A N/A .
Order Parts
2500+ $0.2960 tube
of
45
[logo]¢U¢Z¢2¢T
LM340T12
7812 P+
LM340T-15 TO-220 3Full production N/A N/A .
Order Parts
2500+ $0.2960 tube
of
45
[logo]¢U¢Z¢2¢T
LM340T15
7815 P+
LM340T-5.0 TO-220 3Full production N/A N/A .
Order Parts
2500+ $0.2960 tube
of
45
[logo]¢U¢Z¢2¢T
LM340T5
7805 P+
4 of 6
LM340S-12 TO 263 3Full production N/A N/A Samples
Order Parts
1K+ $0.5700 tube
of
45
[logo]¢U¢Z¢2¢T
LM340S
-12 P+
LM340S-5.0 TO 263 3Full production N/A N/A Samples
Order Parts
1K+ $0.5700 tube
of
45
[logo]¢U¢Z¢2¢T
LM340S
-5.0 P+
LM340SX-12 TO 263 3Full production N/A N/A .
Order Parts
1K+ $0.6000 reel
of
500
[logo]¢U¢Z¢2¢T
LM340S
-12 P+
LM340SX-5.0 TO 263 3Full production N/A N/A .
Order Parts
1K+ $0.6000 reel
of
500
[logo]¢U¢Z¢2¢T
LM340S
-5.0 P+
LM340K-12 TO-3 2Full production N/A N/A .
Order Parts
1K+ $2.1800 tray
of
50
[logo]¢Z¢2¢T
LM340K
12 7812P+
LM340K-15 TO-3 2Full production N/A N/A .
Order Parts
1K+ $2.1800 tray
of
50
[logo]¢Z¢2¢T
LM340K
15 7815P+
LM340K-5.0 TO-3 2Full production N/A N/A .
Order Parts
1K+ $2.1800 tray
of
50
[logo]¢Z¢2¢T
LM340K
-5.0 7805P+
LM340-5.0 MDA die Full production N/A N/A . N/A -
LM340-12 MWC wafer Full production N/A N/A . N/A -
LM340G-12 MWC wafer Full production N/A N/A . N/A -
LM340G-15 MWC wafer Full production N/A N/A . N/A -
LM340G-5 MWC wafer Full production N/A N/A . N/A -
LM340T-5.0 MWC wafer Full production N/A N/A . N/A -
LM340-5.0 MWA wafer Full production N/A N/A . N/A -
Application Notes
5 of 6
Title Size
(in
Kbytes) Date View
Online Download Receive via
Email
AN-103: LM340 Series Three Terminal Positive Regulators 234
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AN-127: LM 143 Monolithic High Voltage Operational Amplifier
Applications 248
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AB-12: Wide Adjustable Range PNP Voltage Regulator 58
Kbytes 4-Nov-
95 View Online Download Receive via
Email
Wide Adjustable Range PNP Voltage Regulator (JAPANESE)31
Kbytes
AN-182: Inproving Power Supply Reliability with IC Power Regulators 76
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AN-202: A Digital Multimeter Using the ADD3501 124
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AN-222: Application Note 222 Super Matched Bipolar Transistor Pair
Sets New Standards for Drift and Noise 399
Kbytes 24-
Feb-99 View Online Download Receive via
Email
AN-298: Isolation Techniques for Signal Conditioning 197
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AN-76: Applying Modern Clock Drivers to MOS Memories 213
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AN-1148:
Application Note 1148 Linear Regulators: Theory Of Operation
and Compensation 143
Kbytes
24-
May-
00 View Online Download Receive via
Email
Please use Adobe Acrobat to view PDF file(s).
If you have trouble printing, see Printing Problems.
[Information as of 29-Aug-2000]
6 of 6
Quick Search
Parametric
Search System
Diagrams Product
Tree Home
About Languages . About the Site . About "Cookies"
National is QS 9000 Certified . Privacy/Security
Copyright © National Semiconductor Corporation
Preferences . Feedback
1 of 6
National Semiconductor Company
Design Purchasing Quality Company Jobs
Products > Analog - Regulators > Linear Regulators - Standard/NPN > Positive Voltage - Fixed > LM340
Product Folder
LM340 Series 3-Terminal Positive Regulators
Generic P/N 340
Contents
lGeneral Description
lFeatures
lDatasheet
lPackage Availability, Models, Samples
& Pricing
lApplication Notes
Parametric Table
Multiple Output Capability No
On/Off Pin No
Input Voltage, min (Volt) 7.50,14.60
Input Voltage, max (Volt) 35
Output Current, max 1 Amp
Output Voltage (Volt) 5,12
General Description
The LM140/LM340A/LM340/LM7800C monolithic 3-terminal positive voltage regulators
employ internal current-limiting, thermal shutdown and safe-area compensation, making
them essentially indestructible. If adequate heat sinking is provided, they can deliver over
1.0A output current. They are intended as fixed voltage regulators in a wide range of
applications including local (on-card) regulation for elimination of noise and distribution
problems associated with single-point regulation. In addition to use as fixed voltage
regulators, these devices can be used with external components to obtain adjustable output
voltages and currents.
Considerable effort was expended to make the entire series of regulators easy to use and
2 of 6
minimize the number of external components. It is not necessary to bypass the output,
although this does improve transient response. Input bypassing is needed only if the
regulator is located far from the filter capacitor of the power supply.
The 5V, 12V, and 15V regulator options are available in the steel TO-3 power package. The
LM340A/LM340/LM7800C series is available in the TO-220 plastic power package, and the
LM340-5.0 is available in the SOT-223 package, as well as the LM340-5.0 and LM340-12
in the surface-mount TO-263 package.
Features
lComplete specifications at 1A load
lOutput voltage tolerances of ±2% at Tj = 25°C and ±4% over the temperature range
(LM340A)
lLine regulation of 0.01% of VOUT/V of [Delta]VIN at 1A load (LM340A)
lLoad regulation of 0.3% of VOUT/A (LM340A)
lInternal thermal overload protection
lInternal short-circuit current limit
lOutput transistor safe area protection
lP+ Product Enhancement tested
Device OutputVoltages Packages
LM140 5, 12, 15 TO-3 (K)
LM340A/LM340 5, 12, 15 TO-3 (K), TO-220 (T), SOT-223 (MP), TO-263 (S)
(5V and 12V only)
LM7800C 5, 8, 12, 15 TO-220 (T)
Datasheet
3 of 6
Title Size
(in Kbytes) Date View Online Download Receive via Email
LM340/LM78MXX Series 3-Terminal Positive Regulators 514 Kbytes 16-Mar-00 View Online Download Receive via Email
Please use Adobe Acrobat to view PDF file(s).
If you have trouble printing, see Printing Problems.
Package Availability, Models, Samples & Pricing
Part Number Package Status Models Samples
&
Electronic
Orders
Budgetary Pricing Std
Pack
Size
Package
Marking
Type # pins SPICE IBIS Quantity $US each
LM340MP-5.0 SOT-223 4Full production N/A N/A Samples
Order Parts
1K+ $0.3300 reel
of
1000
¢2¢T
N00A
LM340MPX-5.0 SOT-223 4Full production N/A N/A .
Order Parts
1K+ $0.3300 reel
of
2000
¢2¢T
N00A
LM340AT-5.0 TO-220 3Full production N/A N/A .
Order Parts
1K+ $0.8000 tube
of
45
[logo]¢U¢Z¢2¢T
LM340AT
5.0 P+
LM340T-12 TO-220 3Full production N/A N/A .
Order Parts
2500+ $0.2960 tube
of
45
[logo]¢U¢Z¢2¢T
LM340T12
7812 P+
LM340T-15 TO-220 3Full production N/A N/A .
Order Parts
2500+ $0.2960 tube
of
45
[logo]¢U¢Z¢2¢T
LM340T15
7815 P+
LM340T-5.0 TO-220 3Full production N/A N/A .
Order Parts
2500+ $0.2960 tube
of
45
[logo]¢U¢Z¢2¢T
LM340T5
7805 P+
4 of 6
LM340S-12 TO 263 3Full production N/A N/A Samples
Order Parts
1K+ $0.5700 tube
of
45
[logo]¢U¢Z¢2¢T
LM340S
-12 P+
LM340S-5.0 TO 263 3Full production N/A N/A Samples
Order Parts
1K+ $0.5700 tube
of
45
[logo]¢U¢Z¢2¢T
LM340S
-5.0 P+
LM340SX-12 TO 263 3Full production N/A N/A .
Order Parts
1K+ $0.6000 reel
of
500
[logo]¢U¢Z¢2¢T
LM340S
-12 P+
LM340SX-5.0 TO 263 3Full production N/A N/A .
Order Parts
1K+ $0.6000 reel
of
500
[logo]¢U¢Z¢2¢T
LM340S
-5.0 P+
LM340K-12 TO-3 2Full production N/A N/A .
Order Parts
1K+ $2.1800 tray
of
50
[logo]¢Z¢2¢T
LM340K
12 7812P+
LM340K-15 TO-3 2Full production N/A N/A .
Order Parts
1K+ $2.1800 tray
of
50
[logo]¢Z¢2¢T
LM340K
15 7815P+
LM340K-5.0 TO-3 2Full production N/A N/A .
Order Parts
1K+ $2.1800 tray
of
50
[logo]¢Z¢2¢T
LM340K
-5.0 7805P+
LM340-5.0 MDA die Full production N/A N/A . N/A -
LM340-12 MWC wafer Full production N/A N/A . N/A -
LM340G-12 MWC wafer Full production N/A N/A . N/A -
LM340G-15 MWC wafer Full production N/A N/A . N/A -
LM340G-5 MWC wafer Full production N/A N/A . N/A -
LM340T-5.0 MWC wafer Full production N/A N/A . N/A -
LM340-5.0 MWA wafer Full production N/A N/A . N/A -
Application Notes
5 of 6
Title Size
(in
Kbytes) Date View
Online Download Receive via
Email
AN-103: LM340 Series Three Terminal Positive Regulators 234
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AN-127: LM 143 Monolithic High Voltage Operational Amplifier
Applications 248
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AB-12: Wide Adjustable Range PNP Voltage Regulator 58
Kbytes 4-Nov-
95 View Online Download Receive via
Email
Wide Adjustable Range PNP Voltage Regulator (JAPANESE)31
Kbytes
AN-182: Inproving Power Supply Reliability with IC Power Regulators 76
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AN-202: A Digital Multimeter Using the ADD3501 124
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AN-222: Application Note 222 Super Matched Bipolar Transistor Pair
Sets New Standards for Drift and Noise 399
Kbytes 24-
Feb-99 View Online Download Receive via
Email
AN-298: Isolation Techniques for Signal Conditioning 197
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AN-76: Applying Modern Clock Drivers to MOS Memories 213
Kbytes 4-Nov-
95 View Online Download Receive via
Email
AN-1148:
Application Note 1148 Linear Regulators: Theory Of Operation
and Compensation 143
Kbytes
24-
May-
00 View Online Download Receive via
Email
Please use Adobe Acrobat to view PDF file(s).
If you have trouble printing, see Printing Problems.
[Information as of 29-Aug-2000]
6 of 6
Quick Search
Parametric
Search System
Diagrams Product
Tree Home
About Languages . About the Site . About "Cookies"
National is QS 9000 Certified . Privacy/Security
Copyright © National Semiconductor Corporation
Preferences . Feedback