Microprocessor Reset Circuits ADM1810 to ADM1813/ADM1815 to ADM1818 FEATURES FUNCTIONAL BLOCK DIAGRAMS Reliable low cost voltage monitor with reset output Suitable for monitoring 2.5 V, 3 V, 3.3 V, and 5 V power supply voltages Reset threshold levels: 4.62 V, 4.35 V, 3.06 V, 2.88 V, 2.55 V, 2.31 V, and 2.18 V typical Active high and low push-pull output choices: ADM1810, ADM1812, ADM1815, and ADM1817 Open-drain with internal pull-up resistor output choices: ADM1811, ADM1813, ADM1816, and ADM1818 Can be used with a manual push-button to generate a reset: ADM1813, ADM1818 Initialization of microprocessor systems with added safety Available in 3-lead SOT-23 and SC70 packages VCC ADM1810/ADM1815 RST VCC TOLERANCE BIAS 150ms DELAY GND TC REFERENCE ADM1811/ADM1816 VCC 5.5k RST VCC TOLERANCE BIAS APPLICATIONS 150ms DELAY Microprocessor systems Computers Controllers Intelligent instruments Automotive systems GND VCC GENERAL DESCRIPTION The ADM181x range of voltage monitoring circuits is used in any application where an electronic system needs to be reset when a voltage increases above or below a predetermined value. Because of the reset delay time incorporated into the ADM181x series, these devices provide a safe startup for electronic systems. Before a system initializes, the power supply must stabilize. Using the ADM181x series ensures that there are typically 150 ms for the power supply to stabilize before the system resets and safe system initialization begins. TC REFERENCE ADM1812/ADM1817 RST VCC TOLERANCE BIAS 150ms DELAY GND TC REFERENCE ADM1813/ADM1818 VCC RESET MONITOR The ADM181x series of microprocessor reset circuits are available in low cost, space-saving SOT-23 and SC70 packages. VCC TOLERANCE BIAS GND 5.5k RST 150ms DELAY TC REFERENCE 00064-001 Data Sheet Figure 1. Rev. F Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 (c)1999-2013 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADM1810 to ADM1813/ADM1815 to ADM1818 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Typical Performance Characteristics ..............................................6 Applications ....................................................................................... 1 Theory of Operation .........................................................................7 General Description ......................................................................... 1 Timing Diagrams for All Devices ...............................................7 Functional Block Diagrams ............................................................. 1 ADM1813 and ADM1818 .............................................................7 Revision History ............................................................................... 2 ADM1810, ADM1812, ADM1815, and ADM1817 ....................7 Specifications..................................................................................... 3 ADM1811 and ADM1816 .............................................................7 Absolute Maximum Ratings............................................................ 4 Outline Dimensions ..........................................................................8 ESD Caution .................................................................................. 4 Ordering Guide .............................................................................9 Pin Configurations and Function Descriptions ........................... 5 REVISION HISTORY 10/13--Rev. E to Rev. F Changed Open-Drain to Open-Drain with Internal Pull-Up Resistor ............................................................................ Throughout Updated Outline Dimensions ......................................................... 8 Changes to Ordering Guide ............................................................ 9 8/08--Rev. D to Rev. E Changes to Table 3 ............................................................................ 5 Updated Outline Dimensions ......................................................... 8 Changes to Ordering Guide ............................................................ 9 10/05--Rev. C to Rev. D Updated Format .................................................................. Universal Added Figure 3 .................................................................................. 5 Changes to Table 3 ............................................................................ 5 Updated Outline Dimensions ......................................................... 8 Edits to Ordering Guide .................................................................. 9 9/03--Rev. B to Rev. C. Added SC70 ......................................................................... Universal Edits to Specifications ...................................................................... 2 Edits to Ordering Guide .................................................................. 4 Updated Outline Dimensions ......................................................... 7 2/03--Rev. A to Rev. B. Edits to Features.................................................................................1 Deleted Table I ...................................................................................1 Edits to Specifications .......................................................................2 Edits to Absolute Maximum Ratings ..............................................3 Edits to Ordering Guide ...................................................................3 Added Typical Performance Characteristics .................................4 Edits to ADM1813 AND ADM1818 section .................................5 Edits to ADM1810, ADM1812, ADM1815, and ADM1817 Section .............................................................................5 Edits to ADM1811 and ADM1816 Section ...................................5 Updated Outline Dimensions ..........................................................6 3/02--Rev. 0 to Rev. A. Addition of Table ..............................................................................1 Edits to Ordering Guide ...................................................................3 Addition of New Text to ADM1813 and ADM1818 Section ......4 4/99--Revision 0: Initial Version Rev. F | Page 2 of 12 Data Sheet ADM1810 to ADM1813/ADM1815 to ADM1818 SPECIFICATIONS VCC = full operating range, TA = -40C to +105C, unless otherwise noted. Table 1. Parameter SUPPLY Voltage Min RST Output Sink Current OUTPUT VOLTAGE VCC TRIP POINT ADM1810-5, ADM1811-5, ADM1812-5, ADM1813-5 ADM1810-10, ADM1811-10, ADM1812-10, ADM1813-10 ADM1815-5, ADM1816-5, ADM1817-5, ADM1818-5 ADM1815-10, ADM1816-10, ADM1817-10, ADM1818-10 ADM1815-20, ADM1816-20, ADM1817-20, ADM1818-20 ADM1815-R23, ADM1816-R23, ADM1817-R23, ADM1818-R23 ADM1815-R22, ADM1816-R22, ADM1817-R22, ADM1818-R22 INTERNAL PULL-UP RESISTOR ADM1811/ADM1816 ADM1813/ADM1818 OUTPUT CAPACITANCE RESET ACTIVE TIME VCC DETECT TO RESET Falling Rising PUSH-BUTTON DETECT TO RST PUSH-BUTTON RESET Max Unit Comments 9 4 5.5 5.5 16 10 V V A A TA = 0C to 105C TA = -40C to +105C VCC = 5.5 V, VCC > VTH, no load VCC = 3.6 V, VCC > VTH, no load A A mA VCC VTH (max), reset not asserted (ADM1810/ADM1815) VCC VTH (min), reset asserted (ADM1812/ADM1817) VCC 2.7 V, reset asserted, VOUT = 0.4 V (ADM1810/ADM1811/ ADM1813/ADM1815/ADM1816/ADM1818) VCC 2.7 V, reset not asserted, VOUT = 0.4 V (ADM1812/ADM1817) ADM1810/ADM1812/ADM1815/ADM1817 at 0 A to 500 A 1 1.2 Current OUTPUT CURRENT RST Output Source Current RST Output Source Current RST Output Sink Current Typ 350 350 8 8 VCC - 0.5 VCC - 0.1 4.50 4.62 4.75 V 4.25 4.35 4.49 V 2.98 3.06 3.15 V 2.80 2.88 2.97 V 2.47 2.55 2.64 V 2.25 2.31 2.37 V 2.12 2.18 2.25 V 3.5 3.1 5.5 5.5 100 150 7.5 7.5 10 250 k k pF ms 10 150 250 s ms s tR = 5 s ADM1813/ADM1818 150 250 ms ADM1813/ADM1818 100 1 100 mA V Rev. F | Page 3 of 12 ADM1810 to ADM1813/ADM1815 to ADM1818 Data Sheet ABSOLUTE MAXIMUM RATINGS TA = 25C, unless otherwise noted. Table 2. Parameter VCC Input Current Operating Temperature Range Storage Temperature Range JA Thermal Impedance, SOT-23 JA Thermal Impedance, SC70 Lead Temperature (Soldering, 10 sec) Vapor Phase (60 sec) Infrared (15 sec) Rating -0.3 V to +6.0 V 20 mA -40C to +105C -65C to +150C 270C/W 146C/W 300C 215C 220C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION Rev. F | Page 4 of 12 Data Sheet ADM1810 to ADM1813/ADM1815 to ADM1818 PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS VCC 1 RST/RST 1 3 GND TOP VIEW (Not to Scale) VCC 2 RST/RST 2 Figure 2. 3-Lead SOT-23 Pin Configuration 00064-014 ADM181x 3 GND TOP VIEW (Not to Scale) 00064-002 ADM181x Figure 3. 3-Lead SC70 Pin Configuration Table 3. Pin Function Descriptions Pin No. SOT-23 SC70 1 2 Mnemonic RST RST 2 3 1 3 VCC GND Description Active High Reset Output. RST remains high while VCC is below the reset threshold and remains high for 150 ms typical after VCC rises above the reset threshold. Applies to the ADM1812 and ADM1817 only. Active Low Reset Output. RST remains low while VCC is below the reset threshold and remains low for 150 ms typical after VCC rises above the reset threshold. Applies to the ADM1810, ADM1811, ADM1813, ADM1815, ADM1816, and ADM1818 only. Supply Voltage. The supply voltage being monitored. Ground. 0 V ground reference for all signals. Rev. F | Page 5 of 12 ADM1810 to ADM1813/ADM1815 to ADM1818 Data Sheet TYPICAL PERFORMANCE CHARACTERISTICS 10 1.011 1.009 NORMALIZED RESET THRESHOLD ICC @VCC = 5.5V 6 ICC @VCC = 3V 4 2 -20 0 20 30 50 70 85 TEMPERATURE (C) 100 1.005 DEVIATION (RISE) 1.003 DEVIATION (FALL) 1.001 0.999 0.997 00064-003 0 -40 1.007 0.995 -40 120 Figure 4. Supply Current vs. Temperature 00064-006 ICC (A) 8 -20 0 20 30 50 70 85 TEMPERATURE (C) 100 120 Figure 7. Normalized Reset Threshold vs. Temperature 900 60 50 MAXIMUM TRANSIENT (s) 700 600 500 VOD = 20mV 400 300 VOD = 125mV 200 30 20 VOD = 200mV 0 -40 -20 0 20 70 85 30 50 TEMPERATURE (C) 100 0 10 120 Figure 5. Power-Down Reset Delay vs. Temperature 370 360 350 340 330 320 00064-005 310 290 -40 -20 0 20 30 50 70 85 TEMPERATURE (C) 100 30 40 60 80 100 200 400 VTH - VCC (mV) 600 800 1000 Figure 8. Maximum Transient Duration Without Causing a Reset Pulse vs. Reset Comparator Overdrive 380 300 00064-007 100 POWER-UP RESET TIMEOUT (ms) 40 10 00064-004 POWER-DOWN RESET DELAY (s) 800 120 Figure 6. Power-Up Reset Timeout vs. Temperature Rev. F | Page 6 of 12 Data Sheet ADM1810 to ADM1813/ADM1815 to ADM1818 THEORY OF OPERATION TIMING DIAGRAMS FOR ALL DEVICES PUSH-BUTTON TIME RESET TIMEOUT The following two timing diagrams are valid for ADM1810, ADM1811, ADM1812, ADM1813, ADM1815, ADM1816, ADM1817, and ADM1818. VOLTAGE INPUT LOW VCC Figure 12. Push-Button Reset Timing Diagram VCC TRIP POINT (MAX) VCC TRIP POINT The ADM1818 range has 2.88 V and 2.55 V (typical) trip point options that allow the user to monitor 3.3 V and 3 V supplies. For 5 V monitoring requirements, the ADM1813 range has 4.62 V and 4.35 V (typical) trip point options. VCC TRIP POINT (MIN) VCC TO RESET DELAY ADM1810, ADM1812, ADM1815, AND ADM1817 00064-008 RST VOL The ADM1812 is a 5 V supply monitor with an active high push-pull output and trip point options of 4.62 V and 4.35 V typical. The ADM1810 is similar to the ADM1812, except that the ADM1810 has an active low push-pull output stage. The ADM1817 is suitable for monitoring 3.3 V, 3 V, and 2.5 V supplies, with an active high push-pull output and trip point options of 3.06 V, 2.88 V, 2.55 V, 2.31 V, and 2.18 V typical. The ADM1815 is similar to the ADM1817, except that the ADM1815 has an active low push-pull output stage. Figure 9. Power-Down Timing Diagram VCC TRIP POINT (MAX) VCC TRIP POINT VCC TRIP POINT (MIN) VCC 00064-011 VOLTAGE INPUT HIGH RESET ACTIVE TIMEOUT 00064-009 The ADM1810/ADM1812/ADM1815/ADM1817 can connect directly to most microprocessor reset inputs without the need for external components. RST VCC Figure 10. Power-Up Timing Diagram ADM1813 AND ADM1818 ADM1810/ ADM1812/ ADM1815/ ADM1817 The ADM1813 and ADM1818 are low cost voltage monitoring devices featuring an open-drain with internal pull-up resistor output and optional push-button reset function. MICROPROCESSOR VCC RST/RST RESET GND ADM1813/ ADM1818 VCC RST 00064-012 VCC MICROPROCESSOR Figure 13. ADM1810/ADM1812/ADM1815/ADM1817 Typical Application RESET ADM1811 AND ADM1816 GND 00064-010 The ADM1811 is a 5 V supply monitor with an active low opendrain with internal pull-up resistor output and trip point options of 4.62 V and 4.35 V typical. The ADM1816 also has an active low open-drain with internal pull-up resistor output but is suitable for monitoring lower voltage supplies of 3.3 V, 3 V, and 2.5 V. Figure 11. ADM1813/ADM1818 Typical Application VCC ADM1811/ ADM1816 MICROPROCESSOR VCC RST RESET GND 00064-013 An optional push-button reset switch can be connected between RST and ground. Pressing this switch pulls the reset output low. If the push-button reset button pulls the RST output low for a period greater than 1 s when the reset button releases the RST line to float high, then the RST line stays low for another 150 ms typical. Figure 14. ADM1811/ADM1816 Typical Application Rev. F | Page 7 of 12 ADM1810 to ADM1813/ADM1815 to ADM1818 Data Sheet OUTLINE DIMENSIONS 3.04 2.90 2.80 1.40 1.30 1.20 3 2.64 2.10 1 2 0.60 0.45 1.03 0.89 2.05 1.78 1.02 0.95 0.88 1.12 0.89 0.100 0.013 GAUGE PLANE 0.54 REF 0.180 0.085 0.25 0.60 MAX 0.30 MIN 011909-C 0.51 0.37 SEATING PLANE COMPLIANT TO JEDEC STANDARDS TO-236-AB Figure 15. 3-Lead Small Outline Transistor Package [SOT-23] (RT-3) Dimensions shown in millimeters 2.20 2.00 1.80 1.35 1.25 1.15 3 2 1 2.40 2.10 1.80 0.65 BSC 0.10 MAX COPLANARITY 0.10 1.10 0.80 0.40 0.25 SEATING PLANE 0.40 0.10 0.26 0.10 0.30 0.20 0.10 ALL DIMENSIONS COMPLIANT WITH EIAJ SC70 Figure 16. 3-Lead Thin Shrink Small Outline Transistor Package [SC70] (KS-3) Dimensions shown in millimeters Rev. F | Page 8 of 12 072809-A 1.00 0.80 Data Sheet ADM1810 to ADM1813/ADM1815 to ADM1818 ORDERING GUIDE Model 1, 2 ADM1810-5AKSZ-REEL ADM1810-5AKSZ-RL7 ADM1810-5ART-REEL7 ADM1810-5ARTZ-REEL ADM1810-5ARTZ-RL7 ADM1810-10AKS-RL7 ADM1810-10AKSZ-RL ADM1810-10AKSZ-RL7 ADM1810-10ARTZ-RL ADM1810-10ARTZ-RL7 ADM1811-5AKS-RL7 ADM1811-5AKSZ-REEL ADM1811-5AKSZ-RL7 ADM1811-5ART-REEL ADM1811-5ART-REEL7 ADM1811-5ARTZ-REEL ADM1811-5ARTZ-RL7 ADM1811-10AKS-RL7 ADM1811-10AKSZ-RL ADM1811-10AKSZ-RL7 ADM1811-10ART-REEL ADM1811-10ARTZ-RL ADM1811-10ARTZ-RL7 ADM1812-5AKS-RL7 ADM1812-5AKSZ-REEL ADM1812-5AKSZ-RL7 ADM1812-5ART-REEL7 ADM1812-5ARTZ-REEL ADM1812-5ARTZ-RL7 ADM1812-10AKS-RL7 ADM1812-10AKSZ-RL ADM1812-10AKSZ-RL7 ADM1812-10ART-RL7 ADM1812-10ARTZ-RL ADM1812-10ARTZ-RL7 ADM1813-5AKS-REEL ADM1813-5AKS-RL7 ADM1813-5AKSZ-REEL ADM1813-5AKSZ-RL7 ADM1813-5ART-RL7 ADM1813-5ARTZ-RL ADM1813-5ARTZ-RL7 ADM1813-10AKS-REEL ADM1813-10AKS-RL7 ADM1813-10AKSZ-RL ADM1813-10AKSZ-RL7 ADM1813-10ART-REEL ADM1813-10ART-RL7 ADM1813-10ARTZ-RL ADM1813-10ARTZ-RL7 Temperature Range -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C Trip Point 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.62 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V 4.35 V Rev. F | Page 9 of 12 Package Option KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) Branding M4Y M4Y MZV M4Y M4Y MZT M4Z M4Z M4Z M4Z M1V M6Z M6Z M1V M1V M6Z M6Z M1T M70 M70 M1T M70 M70 MTV M72 M72 MTV M72 M72 MTT M71 M71 MTT M71 M71 M3V M3V M6X M6X M3V M6X M6X M3T M3T M6Y M6Y M3T M3T M6Y M6Y ADM1810 to ADM1813/ADM1815 to ADM1818 Model 1, 2 ADM1815-5AKS-RL7 ADM1815-5AKSZ-REEL ADM1815-5AKSZ-RL7 ADM1815-5ART-REEL7 ADM1815-5ARTZ-REEL ADM1815-5ARTZ-RL7 ADM1815-10AKS-RL7 ADM1815-10AKSZ-RL ADM1815-10AKSZ-RL7 ADM1815-10ART-REEL ADM1815-10ART-RL7 ADM1815-10ARTZ-RL ADM1815-10ARTZ-RL7 ADM1815-20AKSZ-RL ADM1815-20AKSZ-RL7 ADM1815-20ART-RL7 ADM1815-20ARTZ-RL7 ADM1815-R22AKSZ-RL ADM1815-R22AKSZ-R7 ADM1815-R22ART-RL7 ADM1815-R22ARTZ-RL ADM1815-R22ARTZ-R7 ADM1815-R23AKSZ-RL ADM1815-R23AKSZ-R7 ADM1815-R23ART-RL7 ADM1815-R23ARTZ-RL ADM1815-R23ARTZ-R7 ADM1816-5AKS-REEL7 ADM1816-5AKSZ-REEL ADM1816-5AKSZ-RL7 ADM1816-5ART-REEL7 ADM1816-5ARTZ-REEL ADM1816-5ARTZ-RL7 ADM1816-10AKSZ-RL ADM1816-10AKSZ-RL7 ADM1816-10ART-REEL ADM1816-10ART-RL7 ADM1816-10ARTZ-RL ADM1816-10ARTZ-RL7 ADM1816-20AKS-RL7 ADM1816-20AKSZ-RL ADM1816-20AKSZ-RL7 ADM1816-20ART-RL7 ADM1816-20ARTZ-RL ADM1816-20ARTZ-RL7 Temperature Range -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C Data Sheet Trip Point 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.55 V 2.55 V 2.55 V 2.55 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V Rev. F | Page 10 of 12 Package Option KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) Branding M5K M73 M73 M5K M73 M73 M5E M4F M4F M5E M5E M4F M4F M76 M76 M5A M76 M74 M74 M5B M74 M74 M75 M75 M5C M75 M75 M6K M77 M77 M6K M77 M77 M54 M54 M6E M6E M54 M54 M6A M6H M6H M6A M6H M6H Data Sheet Model 1, 2 ADM1816-R22AKS-RL7 ADM1816-R22AKSZ-RL ADM1816-R22AKSZ-R7 ADM1816-R22ART-RL7 ADM1816-R22ARTZ-RL ADM1816-R22ARTZ-R7 ADM1816-R23AKSZ-RL ADM1816-R23AKSZ-R7 ADM1816-R23ART-RL7 ADM1816-R23ARTZ-RL ADM1816-R23ARTZ-R7 ADM1817-5AKSZ-REEL ADM1817-5AKSZ-RL7 ADM1817-5ART-REEL7 ADM1817-5ARTZ-REEL ADM1817-5ARTZ-RL7 ADM1817-10AKS-RL7 ADM1817-10AKSZ-RL ADM1817-10AKSZ-RL7 ADM1817-10ART-REEL ADM1817-10ART-RL7 ADM1817-10ARTZ-RL ADM1817-10ARTZ-RL7 ADM1817-20AKSZ-RL ADM1817-20AKSZ-RL7 ADM1817-20ART-RL7 ADM1817-20ARTZ-RL ADM1817-20ARTZ-RL7 ADM1817-R22AKSZ-RL ADM1817-R22AKSZ-R7 ADM1817-R22ART-RL7 ADM1817-R22ARTZ-RL ADM1817-R22ARTZ-R7 ADM1817-R23AKSZ-RL ADM1817-R23AKSZ-R7 ADM1817-R23ART-RL7 ADM1817-R23ARTZ-RL ADM1817-R23ARTZ-R7 ADM1818-5AKS-REEL ADM1818-5AKSZ-RL7 ADM1818-5ART-REEL7 ADM1818-5ARTZ-REEL ADM1818-5ARTZ-RL7 ADM1818-10AKS-RL7 ADM1818-10AKSZ-RL ADM1818-10AKSZ-RL7 ADM1818-10ART-REEL ADM1818-10ART-RL7 ADM1818-10ARTZ-RL7 ADM1810 to ADM1813/ADM1815 to ADM1818 Temperature Range -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C Trip Point 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V 2.88 V Rev. F | Page 11 of 12 Package Option KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) Branding M6B M78 M78 M6B M78 M78 M79 M79 M6C M79 M79 M7F M7F M7K M7F M7F M7E M7G M7G M7E M7E M7G M7G M7H M7H M7A M7H M7H M7J M7J M7B M7J M7J M7L M7L M7C M7L M7L M8K M4T M8K M4T M4T M8E M7P M7P M8E M8E M7P ADM1810 to ADM1813/ADM1815 to ADM1818 Model 1, 2 ADM1818-20AKSZ-RL ADM1818-20AKSZ-RL7 ADM1818-20ART-REEL ADM1818-20ART-RL7 ADM1818-20ARTZ-RL7 ADM1818-R22AKS-RL ADM1818-R22AKS-RL7 ADM1818-R22AKSZ-RL ADM1818-R22AKSZ-R7 ADM1818-R22ART-RL ADM1818-R22ART-RL7 ADM1818-R23AKS-RL7 ADM1818-R23AKSZ-RL ADM1818-R23AKSZ-R7 ADM1818-R23ART-RL ADM1818-R23ART-RL7 1 2 Temperature Range -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C -40C to +105C Data Sheet Trip Point 2.55 V 2.55 V 2.55 V 2.55 V 2.55 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.18 V 2.31 V 2.31 V 2.31 V 2.31 V 2.31 V Available only in reels. Z = RoHS Compliant Part. (c)1999-2013 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D00064-0-10/13(F) Rev. F | Page 12 of 12 Package Option KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) KS-3 (SC70) KS-3 (SC70) KS-3 (SC70) RT-3 (SOT-23) RT-3 (SOT-23) Branding M59 M59 M8A M8A M59 M8B M8B M7M M7M M8B M8B M8C M7N M7N M8C M8C