BC807-16LT1 BC807-25LT1 BC807-40LT1 SOT-23 BIPOLAR TRANSISTORS TRANSISTOR (PNP) FEATURES * Ideally suited for automatic insertion * Epitaxial planar die construction * Complementary NPN type available(BC817) SOT-23 COLLECTOR 3 MECHANICAL DATA * * * * * BASE Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.008 gram 0.055(1.40) 0.047(1.20) 1 2 EMITTER 0.006(0.15) 0.003(0.08) 0.043(1.10) 0.035(0.90) 0.020(0.50) 0.012(0.30) 0.004(0.10) 0.000(0.00) 0.100(2.55) 0.089(2.25) 0.020(0.50) 0.012(0.30) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 1 0.019(2.00) 0.071(1.80) O Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 0.118(3.00) 0.110(2.80) 3 2 Dimensions in inches and (millimeters) o MAXIMUM RATINGS ( @ TA = 25 C unless otherwise noted ) VALUE UNITS Collector-base voltage CHARACTERISTICS VCBO -50 V Collector-emitter voltage VCEO -45 V Emitter-base voltage VEBO -5 V Collector current-continuous IC -0.5 A Collector dissipation PC 0.3 W TJ,Tstg -55 -150 Junction and storage temperature SYMBOL o C ELECTRICAL CHARACTERISTICS ( @ TA = 25oC unless otherwise noted ) CHARACTERISTICS SYMBOL 16LT1 25LT1 40LT1 16LT1 25LT1 MIN MAX 40LT1 UNITS Collector-base breakdown voltage (IC= -10mA, IE=0) VCBO -50 - V Collector-emitter breakdown voltage (IC= -10mA, IB=0) VCEO -45 - V Emitter-base breakdown voltage (IE= -1mA, IC=0) VEBO -5 - V Collector cut-off current (VCB= -45V, IE=0) ICBO - -0.1 mA Collector cut-off current (VCE= -40V, IB=0) ICEO - -0.2 mA Emitter cut-off current (VEB= -4V, IC=0) DC current gain (VCE= -1V, IC= -100mA) IEBO hFE(1) 100 160 -0.1 250 250 400 mA 600 - Collector-emitter saturation voltage (IC= -500mA, IB= -50mA) VCE(sat) - -0.7 V Base-emitter saturation voltage (IC= -500mA, IB= -50mA) VBE(sat) - -1.2 V Transition frequency (VCE= -5V, IC= -10mA, f= 100MHZ) fT 100 - MHZ MARKING: 16LT1--5A; 25LT1--5B; 40LT1--5C 2007-3 RATING AND CHARACTERISTICS CURVES ( BC807-16LT1/-25LT1/-40LT1 ) 1000 400 fT, GAIN BANDWIDTH PRODUCT (MHZ) Pd , POWER DISSIPATION (mW) O 300 200 100 TA=25 C f=20MHZ -VCE=5.0V 1.0V 100 10 0 0 1 200 100 TSB, SUBSTRATE TEMPERATURE( C) -IC, COLLECTOR CURRENT (mA) Figure2. Gain-Bandwidth Product vs. Collector Current 0.5 1000 -IC / - IB= 10 Typical limits O at TA=25 C 0.4 -VCE= 1V hFE, DC CURRENT GAIN -VCESAT, COLLECTOR SATURATION VOLTAGE (V) Figure1. Power Derating Curve 0.3 0.2 O 25 C O 150 C 0.1 O 150 C O 25 C O -50 C 100 O -50 C 0 10 0.1 10 1 100 0.1 1000 -Ic,COLLECTOR CURRENT(mA) 500 3.2 1 10 1000 100 -Ic, COLLECTOR CURRENT (mA) Figure3. Collector Sat Voltage vs Collector Current Figure4. DC Current Gain vs Collector Current 100 2.8 0.35 2.4 400 -Ic, COLLECTOR CURRENT (mA) -Ic, COLLECTOR CURRENT (mA) 1000 100 10 O 2 1.8 1.6 1.4 300 1.2 0.8 200 0.6 0.4 100 -IB= 0.2mA 0.3 80 0.25 60 0.2 0.15 40 0.1 20 -IB= 0.05mA 0 0 0 1 2 0 10 20 -VCE, COLLECTOR - EMITTER VOLTAGE (V) -VCE, COLLECTOR-EMITTER VOLTAGE (V) Figure5. Typical Emitter-Collector Characteristics Figure6. Typical Emitter-Collector Characteristics DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.