BC847SD87Z - Fairchild Semiconductor Corporation

B2 E2

E1 B1 C2

pin #1

NPN Multi-Chip General Purpose Amplifier

This device is designed for general purpose amplifier applications at collector

currents to 200 mA. Sourced from Process 07.

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.

NOTES:

1) These ratings are based on a maximum junction temperature of 150 degrees C.

2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

Symbol Parameter Value Units

VCEO Collec t or-Emitter Volt age 45 V

VCES Collec t or-Base Volt age 50 V

VCBO Collec t or-Base Volt age 50 V

VEBO Emi tter-Base Voltage 6.0 V

ICCollect or Current - Continuous 200 mA

TJ, Tstg Operating and Storage Junction Temperat ure Range -55 to +150 °C

1998 Fairchild Semiconductor Corporation

Absolute Maximum Ratings* TA = 25°C unless otherwise noted

Thermal Characteristics TA = 25°C unless otherwise noted

Symbol Characteristic Max Units

BC847S

PDTotal Device Dissipation

Derate above 25°C300

2.4 mW

mW/°C

RθJA Thermal Resis t ance, Junc t i on to A mbient 415 °C/W

BC847S

SC70-6

Mark: 1C

NOTE: The pinouts are symmetrical; pin 1 and pin

4 are interchangeable. Units inside the carrier can

be of either orientation and will not affect the

functionality of the device.

BC847S

Electrical Characteristics TA = 25°C unless otherwise noted

OFF CHARACTERISTICS

Symbol Parameter Test Conditions Min Typ Max Units

V(BR)CEO Collector-Emit ter Breakdown Voltage IC = 10 mA, IB = 0 45 V

V(BR)CES Collector-Base Breakdown Voltage IC = 10 µA, IE = 0 50 V

V(BR)CBO Collector-Base Breakdown Voltage IC = 10 µA, IE = 0 50 V

V(BR)EBO Emitter-Base Breakdown Voltage IE = 10 µA, IC = 0 6.0 V

ICBO Collector-Cutoff Current VCB = 30 V, IE = 0

VCB = 30 V, IE = 0, TA = 150°C15

5.0 nA

µA

ON CHARACTERISTICS

hFE DC Current Gain IC = 2. 0 mA, V CE = 5. 0 V 110 630

VCE(sat)Collector-Emit ter Saturati on V olt age IC = 10 mA , IB = 0.5 mA

IC = 100 mA, IB = 5.0 mA 0.25

0.65 V

VBE(on)Base-Emitter ON Voltage IC = 2.0 mA, VCE = 5.0 mA

IC = 10 mA, V CE = 5. 0 mA 0.58 0.7

0.77 V

SMALL SIGNAL CHARACTERISTICS

fTCurrent Gain - Bandwidth Product IC = 20 mA , VCE = 5.0,

f = 100 mHz 200 MHz

Cobo Output Capacitance VCB = 10 V, f = 1.0 MHz 2.0 pF

NPN Multi-Chip General Purpose Amplifier

(continued)

Typical Characteristics

Co llector-E mitter Sa turati on

Volt age vs Collector Cu rrent

0.1 1 10 100

0.05

0.1

0.15

0.2

0.25

0.3

I - COL L ECTOR CURRENT (mA)

V - COLLECTOR-EM ITTER VO LTA GE (V)

CESAT

25 °C

- 40 °C

125 °C

β = 10

Ty pical Pu ls ed C ur r ent Ga in

vs Co ll ect or Curr e nt

0.01 0.03 0.1 0.3 1 3 10 30 100

200

400

600

800

1000

1200

I - COLLECTOR CURRENT ( mA)

h - TYPI CAL PUL SED CUR REN T G AIN

125 °C

25 °C

- 4 0 °C

V = 5.0 V

Typical Characteristics

Inp ut a nd Ou t put C apa cita nce

vs Re ver se Bi as Vo lt age

0 4 8 121620

REVERSE BIAS VOLTAGE (V)

CAPAC ITAN CE (pF)

f = 1.0 MHz

Cob

Contours of Constant Gain

Bandwidth Product (f )

0.1 1 10 100

I - COLLECTO R CURRENT (mA)

V - COLLECTOR VOLTAGE (V)

17 5 MHz

15 0 MHz

12 5 MHz

75 MHz

10 0 MHz

Base- Emitter S aturati on

Volt age vs Collect or Curr en t

0.1 1 10 100

0.2

0.4

0.6

0.8

I - COL L ECTO R CURRENT (mA)

V - COLLEC TOR-EMITTER VO LTA GE (V)

BESAT

β = 10

25 °C

- 40 °C

125 °C

Base-Emitter ON Voltage vs

Collector Current

0.1 1 10 40

0.2

0.4

0.6

0.8

I - CO LL ECTO R CURRENT (mA)

V - BASE-EMITTER ON VOLTAGE (V)

BEON

V = 5.0 V

25 °C

- 40 °C

125 °C

Coll ector-Cutoff Cur re nt

vs Amb ient Temp erature

25 50 75 100 125 150

0.1

T - AMBIE NT TE MP ERATURE ( C)

I - COLLECTOR CU RR ENT (nA)

CBO

V = 45V

No rmalized Collecto r-Cutoff C urr en t

vs Ambient Te mperat ure

25 50 75 100 125 150

100

1000

T - A MBIENT TEMPER ATUR E ( C)

CH AR AC TER ISTIC S R ELATI VE TO VALU E AT T = 25 C

BC847S

NPN Multi-Chip General Purpose Amplifier

(continued)

Typical Characteristics (continued)

NPN Multi-Chip General Purpose Amplifier

(continued)

Power Dis sipati on vs

Am bi en t Te mpe rature

0 25 50 75 100 125 150

100

200

300

400

500

TEMPERATURE ( C)

P - POWER DIS SIPATION (mW)

SC70-6

Wide band Noise Frequency

vs Source Resistanc e

1,000 2,000 5,000 10,000 20,000 50,000 100,000

R - SOURCE RESISTANCE ( )

N F - NO IS E FI G U RE (d B)

V = 5.0 V

BA NDW IDTH = 15 .7 kHz

I = 10 µA

I = 100 µA

SΩ

I = 30 µA

BC847S

Noise Figure vs Frequency

0.0001 0.001 0.01 0.1 1 10 100

f - FRE QU E NC Y (M Hz)

NF - NOIS E FIGURE (d B)

V = 5. 0V

I = 200 µA,

R = 10 kΩ

I = 1.0 mA,

R = 500 Ω

I = 100 µA,

R = 10 kΩ

I = 1.0 mA,

R = 5.0 kΩ

SC70-6 Unit Orientation

SC70-6 Packaging

Configuration: Figure 1.0

Components Leader Tape

500mm min imum or

125 empty poc kets

Tr aile r Tape

300mm min imum or

75 empty poc kets

SC70-6 Tape Leader and Trailer

Configuration: Figure 2.0

Cover Tape

Carrier Tape

Note/Comments

Packaging Option

SC70-6 Pa ckaging Information

Standard

(no flow c ode) D87Z

Packaging type

Reel Size

TNR

7" Dia

TNR

13"

Qty per Reel/Tube/Bag 3,000 10,000

Box Dimension (mm) 184x187x47 343x343x64

Max qty per Box 9,000 30,000

Weight per unit (gm) 0.0055 0.0055

Weight per Reel (kg) 0.1140 0.3960

F63TNR

Label

Customized Label

Antistatic Cover Tape

184mm x 187mm x 47mm

Pizza Box for Standard Option

F63TNR

Label

F63TNR Barcode Label

F63TNR Labe l sample

343mm x 342mm x 64mm

Intermediate box for D87Z Option

21 21 21 21

F63TNR

Label

Pi n 1

LOT: CBVK741B019

FSID: FDG6 3 02P

D/C1: D9842 QTY1: SPEC REV:

SPEC:

QTY: 3000

D/C2: QTY2: CPN: N/F: F (F63TNR)3

Packaging Description:

SC70-6 parts are shipped in tape. The carrier tape is

made from a dissipative (carbon filled) polycarbonate

resin. The cover tape is a multilayer film (H eat Activated

Adhesive in nature) primarily composed of polyester film,

adhesive layer, sealant, and anti-static sprayed agent.

These reeled parts in standard option are shipped with

3,0 00 uni ts p er 7" or 17 7cm di amet er re el. The re els are

dark blue in color and is made of polystyrene plastic (anti-

static coated). Other option comes in 10,000 units per 13"

or 330 cm diam eter re el. T his a nd some othe r o pti ons are

described in the Packaging Information table.

These full reels are individually barcode labeled and

placed in s ide a pi z za box (illustrated in figure 1.0) made of

recyclable corrugated brown paper with a Fairchild logo

printing. One pizza box contains three reels maximum.

And these pizza boxes are placed inside a barcode

labeled shipping box which comes in different sizes

depending on the num ber of par ts shipped.

Stat ic Dissipative

Em b os s e d C arr i er T a pe

SC70-6 Tape and Reel Data

August 1999, Rev . C

SC70-6 Tape and Reel Data, continued

July 1999, Rev . C

A0 D1

Dimensions are in inches and millimeters

Tape Size Reel

Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)

8mm 7" Dia 7.00

177.8 0.059

1.5 0.512 +0.020/-0.008

13 +0.5/-0.2 0.795

20.2 2.165

55 0.331 +0.059/-0.000

8.4 +1.5/0 0.567

14.4 0.311 – 0.429

7.9 – 10.9

8m m 13" Dia 13.00

330 0.059

1.5 0.512 +0.020/-0.008

13 +0.5/-0.2 0.795

20.2 4.00

100 0.331 +0.059/-0.000

8.4 +1.5/0 0.567

14.4 0.311 – 0.429

7.9 – 10.9

See detail AA

Dim A

max

13" Diameter Option

7" Diameter Option

Dim A

Max

See detail AA

W2 max Measured at Hub

W1 Measured at Hub

Dim N

Dim D

min

Dim C

B Min

DETAIL AA

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481

rotational and lateral movement requirements (see sketches A, B, and C).

20 deg maximum component rotation

0.5mm

maximum

0.5mm

maximum

Sketch C (Top View)

Component lateral movement

Typical

component

cavity

center line

20 deg m aximum

Typical

component

center line

Sketch B (Top View)

Component Rotation

Sketch A (Si de or Front Sectional View)

Component Rotation

User Direction of Feed

SC70-6 Embossed Carrier Tape

Configuration: Figure 3.0

SC70-6 Reel Configuration: Figure 4.0

Dimensions are in millimeter

Pkg type

A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc

SC70-6

(8mm)

2.24

+/-0.10 2.34

+/-0.10 8.0

+/-0.3 1.55

+/-0.05 1.125

+/-0.125 1.75

+/-0.10 6.25

min 3.50

+/-0.05 4.0

+/-0.1 4.0

+/-0.1 1.20

+/-0.10 0.255

+/-0.150 5.2

+/-0.3 0.06

+/-0.02

SC70-6 (FS PKG Code 76)

SC70-6 Package Dimensions

March 2000, Rev . B

1:1

Scale 1:1 on letter size paper

Dimensions shown below are in:

inches [millimeters]

Par t Weight per unit (gram): 0.0055

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is

not intended to be an exhaustive list of all such trademarks.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.

As used herein:

1. Life support devices or systems are devices or

systems which, (a) are intended for surgical implant into

the body, or (b) support or sustain life, or (c) whose

failure to perform when properly used in accordance

with instructions for use provided in the labeling, can be

reasonably expected to result in significant injury to the

user.

2. A critical component is any component of a life

support device or system whose failure to perform can

be reasonably expected to cause the failure of the life

support device or system, or to affect its safety or

effectiveness.

PRODUCT ST A TUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information

Preliminary

No Identification Needed

Obsolete

This datasheet contains the design specifications for

product development. Specifications may change in

any manner without notice.

This datasheet contains preliminary data, and

supplementary data will be published at a later date.

Fairchild Semiconductor reserves the right to make

changes at any time without notice in order to improve

design.

This datasheet contains final specifications. Fairchild

Semiconductor reserves the right to make changes at

any time without notice in order to improve design.

This datasheet contains specifications on a product

that has been discontinued by Fairchild semiconductor.

The datasheet is printed for reference information only.

Formative or

In Design

First Production

Full Production

Not In Production

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER

NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD

DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICA TION OR USE OF ANY PRODUCT

OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT

RIGHTS, NOR THE RIGHTS OF OTHERS.

PowerTrench

QFET™

QS™

QT Optoelectronics™

Quiet Series™

SILENT SWITCHER

SMART ST ART™

SuperSOT™-3

SuperSOT™-6

SuperSOT™-8

FASTr™

GlobalOptoisolator™

GTO™

HiSeC™

ISOPLANAR™

MICROWIRE™

OPTOLOGIC™

OPTOPLANAR™

PACMAN™

POP™

Rev . G



ACEx™

Bottomless™

CoolFET™

CROSSVOLT™

DOME™

E2CMOSTM

EnSignaTM

FACT™

F ACT Quiet Series™

FAST

SyncFET™

TinyLogic™

UHC™

VCX™

