For more Information
please call
1-800-Belden1
General Description:
Series 6, 18 AWG solid .040" bare copper-covered steel conductor, plenum, foam FEP insulation,
Duobond® II + aluminum braid shield (90% coverage), Flamarrest® jacket.
Physical Characteristics (Overall)
Conductor
AWG:
# Coax AWG Stranding Conductor Material Dia. (in.)
118 Solid BCCS - Bare Copper Covered Steel .040
Total Number of Conductors: 1
Insulation
Insulation Material:
Insulation Trade Name Insulation Material Dia. (in.)
Teflon® FFEP - Foam Fluorinated Ethylene Propylene .170
Outer Shield
Outer Shield Material:
Layer # Outer Shield Trade Name Type Outer Shield Material Coverage (%)
1Bonded Duofoil® Tape Bonded Aluminum Foil-Polyester Tape-Aluminum Foil 100
2 Braid AL - Aluminum 90
Outer Jacket
Outer Jacket Material:
Outer Jacket Trade Name Outer Jacket Material
Flamarrest® LS PVC - Low Smoke Polyvinyl Chloride
Overall Cable
Overall Nominal Diameter: 0.235 in.
Mechanical Characteristics (Overall)
Operating Temperature Range: -20°C To +75°C
Bulk Cable Weight: 27 lbs/1000 ft.
Max. Recommended Pulling Tension: 162 lbs.
Min. Bend Radius/Minor Axis: 2.500 in.
Applicable Specifications and Agency Compliance (Overall)
Applicable Standards & Environmental Programs
NEC/(UL) Specification: CATVP, CMP
CEC/C(UL) Specification: CMP
EU Directive 2011/65/EU (ROHS II): Yes
EU CE Mark: No
EU Directive 2000/53/EC (ELV): Yes
EU Directive 2002/95/EC (RoHS): Yes
EU RoHS Compliance Date (mm/dd/yyyy): 04/01/2005
Page 1 of 3 10-30-2013
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
1530AP Coax - CATV Cable
EU Directive 2002/96/EC (WEEE): Yes
EU Directive 2003/11/EC (BFR): Yes
CA Prop 65 (CJ for Wire & Cable): Yes
MII Order #39 (China RoHS): Yes
Series Type: Series 6
Flame Test
UL Flame Test: NFPA 262
CSA Flame Test: FT6
Plenum/Non-Plenum
Plenum (Y/N): Yes
Non-Plenum Number: 1530A
Electrical Characteristics (Overall)
Nom. Characteristic Impedance:
Impedance (Ohm)
75
Nom. Inductance:
Inductance (µH/ft)
.09
Nom. Capacitance Conductor to Shield:
Capacitance (pF/ft)
16.3
Nominal Velocity of Propagation:
VP (%)
83
Nominal Delay:
Delay (ns/ft)
1.24
Nom. Conductor DC Resistance:
DCR @ 20°C (Ohm/1000 ft)
28.0
Nominal Outer Shield DC Resistance:
DCR @ 20°C (Ohm/1000 ft)
5
Nom. Attenuation:
Freq. (MHz) Attenuation (dB/100 ft.)
1.3
10 .7
50 1.6
100 2.2
200 3.0
400 4.6
700 6.6
900 7.7
1000 8.2
Max. Operating Voltage - UL:
Voltage
300 V RMS
Minimum Structural Return Loss:
Description Freq. (MHz) Start Freq. (MHz) Stop Freq. (MHz) Min. SRL (dB)
51000 20
Page 2 of 3 10-30-2013
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
1530AP Coax - CATV Cable
Notes (Overall)
Notes: Sweep tested 5 MHz to 1 GHz. Teflon® is a registered trademark of E. I. duPont de Nemours and Co. used under license by
Belden, Inc.
Put Ups and Colors:
Item # Putup Ship Weight Color Notes Item Desc
1530AP 8771000 1,000 FT 31.000 LB NATURAL C #18 FFEP RG6/U FLRST
Notes:
C = CRATE REEL PUT-UP.
Revision Number: 1 Revision Date: 08-21-2012
© 2013 Belden, Inc
All Rights Reserved.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications
described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not
ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express,
statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or
exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,
negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the
compliance date may be in stock at Belden facilities and in our Distributor’s inventory. The information provided in this Product Disclosure, and
the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden’s knowledge,
information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide
for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not
to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for
determining the applicability of legislation and regulations based on their individual usage of the product.
Page 3 of 3 10-30-2013
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
1530AP Coax - CATV Cable