Positronic Industries
connectpositronic.com
WIN-D
Win-DD
Series
ENVIRONMENTAL
D-SUBMINIATURE, IMPROVED
UNIBODY DESIGN
NEW
NEW
WIN-D and WIN-DD series D-subminiature
connectors have been a popular choice in applications
with environmental considerations. WIN-D and WIN-DD
environmental D-subminiature connectors achieve
water and dust ingress protection to IP67.
Positronic now offers a new “unibody” design. The
unibody design eliminates the need to add sealants as
a secondary operation. This allows more rapid manufac-
turing of the connector, which reduces cost. In addition,
concern over differences in coefficients of expansion of
dissimilar materials is minimized. This allows for
improved performance and a wider operating tempera-
ture range.
For extremely harsh environments, or where
Corrosion Resistance is required, the contacts are
supplied with extra gold plating thickness, and the
connector shells and jackscrews are supplied in stain-
less steel. For applications where Corrosion
Protection is adequate, contact surfaces are plated
with gold flash over nickel. Shells and accessories are
zinc plated with dichromate seal.
The unibody design is offered in 9 and 25 contact
female variants, and a 26 position female high density
variant. A variety of solder terminated contacts and “cul-
de-sac” accessories are available to meet specific appli-
cation requirements. WIN-D and WIN-DD Series
connectors conform to IEC 807-2 Performance Level 2
mechanical and dimensional requirements and conform
to EIA RS232 and RS449 and CCITT X.24 interface
standards.
POSITRONIC INDUSTRIES
Springfield, Missouri USA • 800.641.4054 • info@connectpositronic.com
www.connectpositronic.com
Catalog C-006-1 Rev. A
** One piece unibody housing
eliminates need for sealants **
** Standard and high
density options **
** Improved temperature range **
** Increased performance **
** Higher reliability **
** Lower cost **
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
RoHS
RoHS
Compliant
RoHS Compliant
options available!
WIN-D
Win-DD
Series
Positronic Industries
connectpositronic.com
2DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
TECHNICAL
CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS:
WIN-D and WIN-DD series connectors mounted
on IEC 529 or NEMA 250-1991 enclosures
for electrical equipment.
WIN-D and WIN-DD Connector Panel mount sealing
plates, when mounted on the walls of enclosures, main-
tain the dust and water ingress protection rating of IEC
529 or NEMA 250 enclosure on which they are mounted.
WIN-D and WIN-DD connector enclosure assemblies
provide dust and water ingress protection to IP67, which
allows temporary immersion in water to a depth of 1.0
meter for 30 minutes without ingress of water or dust to
the enclosure.
ENVIRONMENTAL TEST SPECIFICATIONS
Applicable IEC Moisture Tests
IP65 IEC 529 Test 14.2.5 – Spray nozzle 6.3 mm diame-
ter, delivery rate 12.5 liters per minute, 1 minute duration
of connector exposure to spray. When conducting this
test on Portable Enclosure Connectors, the protective
cover must be securely fastened over the face of the con-
nector.
Requirements
No water to have penetrated enclosure through connector.
Applicable IEC Moisture Tests
IP67 IEC 529 Test 14.2.7 – Temporary immersion, 1.0
meter for 30 minutes.
Requirements
No water to have penetrated enclosure through connector.
Applicable IEC Connector Tests
After Moisture Exposure Tests
Have Been Performed
IEC 512-2, Test 3a – Insulation Resistance
IEC 512-2, Test 4a – Voltage proof
Limited water immersion testing was performed on virgin
connectors before leaving our factory. We recommend
that our environmental connectors be retested by our
customers after a suitable period of time/temperature
conditioning has taken place to determine the suitability
of the connector for the application. We cannot predict
service life of our connectors for all applications.
Requirements
Portable enclosure. 1 G ohm minimum insulation resist-
ance after connector face and contacts are dried.
Voltage proof 1,000 V rms.
Unless otherwise specified, dimensional tolerances are:
1] ±0.001 inches [0.03 mm] for male contact mating diameters.
2] ±0.003 inches [0.08 mm] for contact termination diameters.
3] ±0.005 inches [0.13 mm] for all other diameters.
4] ±0.015 inches [0.38 mm] for all other dimensions.
Products described within this catalog may be
protected by one or more of the following US. patents:
#4,721,472 #4,900,261 #5,255,580
#5,329,697 #6,260,268 #6,835,079
Patented in Canada, 1992 Other Patents Pending
Positronic Industries believes the data contained herein to be reliable. Since the technical information is given free of charge, the User employs
such information at his own discretion and risk. Positronic Industries assumes no responsibility for results obtained or damages incurred from use
of such information in whole or in part.
Positronic Industries’ FEDERAL SUPPLY CODE (Cage Code) FOR MANUFACTURERS is 28198
WIN-D
Win-DD
Series Positronic Industries
connectpositronic.com
TECHNICAL
CHARACTERISTICS
MATERIALS AND FINISHES:
Insulator: Nylon resin, UL 94V-0 black color.
Contacts: Female contacts – precision machined
high tensile phosphor bronze.
Contact Plating: “Corrosion Protection”: gold flash
over nickel plate.
“Corrosion Resistant”: gold plate
0.000030 inch [0.75 micron] over nickel
plate.
Shells and Jackscrew “Corrosion Protection”:
Systems and steel, zinc plated with dichromate seal.
Cul-de-Sac Mounting “Corrosion Resistant”:
Accessories: stainless steel passivated.
Push-on Fasteners: Phosphor bronze with tin plate.
Angle Brackets: Brass, zinc plate with dichromate seal.
Interfacial Seal: Elastomer or TPE.
Panel Mount Sealing
Plate Assembly: Glass filled thermoplastic with elas-
tomer O-ring.
Protective cover over
connector shell: Conductive polyethylene or conductive
polyester.
ELECTRICAL CHARACTERISTICS:
Contact Current Rating: 7.5 amperes nominal, size 20
contacts
5 amperes nominal, size 22 contacts
Initial Contact
Resistance: 0.010 ohms maximum.
Insulator Resistance: 5 G ohms.
Clearance and Creepage
Distance Minimum: 0.039 inch [1mm].
Proof Voltage: 1000 V r.m.s.
Working Voltage: 300 V r.m.s.
MECHANICAL CHARACTERISTICS:
Fixed Contacts: WIN-D Size 20 contact, female
contact – rugged open entry design.
WIN-DD Size 22 contact, female
contact – rugged open entry design.
Contact Retention in
Insulator: 6 lbs. [27N]
Contact Terminations: WIN-D Solder cup contacts – 0.042
inch [1.06 mm] minimum hole diameter
for 20 AWG [0.5 mm2] wire maximum.
Straight printed board mount – 0.028
inch [0.71 mm] diameter. 90° printed
board mount – 0.028 inch [0.71 mm]
diameter for all printed board contact
footprints.
WIN-D Solder cup contacts – 0.035
inch [0.89 mm] minimum hole diameter
for 22 AWG [0.3 mm2] wire maximum.
Straight printed board mount – 0.020
inch [0.5 mm] diameter. 90° printed
board mount contact terminations
0.030 inch [0.76 mm] diameter.
Polarization: Trapezoidally shaped shells.
Enclosure Mounting
Accessories: Cul-de-sac blind hole fasteners, angle
brackets and push-on fasteners.
Inside Wall
Enclosure Mount: Minimum thickness 0.040 inch [1.02
mm]. Maximum thickness 0.080 inch
[2.03 mm].
Locking Systems: Jackscrews.
Mechanical Operations:
500 operations minimum per IEC 512-5.
Required Sealing
Plate Mounting Torque: 1.75 in-lb. [0.20 Nm] minimum.
8.00 in-lb. [0.90 Nm] maximum.
CLIMATIC CHARACTERISTICS:
Temperature Range: -40°C to +125°C
3
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
RoHS
RoHS
Compliant
For RoHS options
see page 11.
Printed Board
Panel mount sealing plate,
Inside wall enclosure mounting
O-Ring
Protective Cover
Enclosure, IEC or
NEMA Type
Fixed Jackscrews
WIN-D
Win-DD
Series
INGRESS PROTECTION
CONNECTION SYSTEM
Positronic Industries
connectpositronic.com
4DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
CONNECTOR-ENCLOSURE UNIT ENVIRONMENTAL RATINGS
IEC 529 Classification
Designations Rated to
IP67 Degree of Protection
NEMA Enclosure Types
Approximate Equivalents of
IP67 Degree of Protection
IP67, “Corrosion Protected
Dust tight and limited effects of water immersion, 1.0
meter for 30 minutes. Corrosion protected with zinc plat-
ed dichromate sealed shells and jackscrews. Contacts
plated gold flash over nickel.
IP67, “Corrosion Resistance
Dust tight and limited effects of water immersion 1.0
meter for 30 minutes. Corrosion resistant with stainless
steel shells and jackscrews. Contacts plated 0.000030
inch [0.75 microns] gold over nickel.
The system consists of an input/output connector
mechanically mounted and sealed to a portable enclo-
sure containing electrical equipment. The connector and
enclosure together provide a degree of protection from
dust and moisture in accordance with IEC or NEMA
ingress protection requirements. The enclosure and
connector may be exposed to dust, splashing water,
intermittent rain, or limited water immersion during its
outdoor use. When Corrosion Resistance is a
requirement, the connector should be equipped with
stainless steel shells and jackscrews, and contacts plat-
ed 0.000030 inch [0.75 microns] gold over nickel.
The portable enclosure will be connected (down
loaded) periodically to a non-environmental performance
connector positioned in a dry and controlled atmosphere
environment.
NEMA Types 3, 3R, 4 and 6
NEMA Type 4X
FIXED ENCLOSURE
MOUNTED CONNECTOR
The connector is mounted on the
portable enclosure. The mating con-
nector is in a remote location and is
non-environmental.
WIN-D
Win-DD
Series Positronic Industries
connectpositronic.com
ENVIRONMENTAL SEALING
FEATURES OF
UNIBODY DESIGN
ENCLOSURE MOUNTED CONNECTOR
Panel Mount
Sealing Plate
O-Ring
Female contact
Front Shell
Contacts have special
water-tight force fit
seal into insulator
5
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
0.130 [3.30]
0.150 [3.81]
0.010 [0.25] MIN.
ø0.028 [0.71] Typ.
O-Ring
WIN-D
Win-DD
Series
ENVIRONMENTAL
D-SUBMINIATURE, IMPROVED
UNIBODY DESIGN
Positronic Industries
connectpositronic.com
6DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
STRAIGHT PRINTED BOARD
MOUNT CONNECTOR
CONTACT VARIANTS
FACE VIEW OF FEMALE CONNECTOR
SOLDER CUP CONNECTOR
WITH ENCLOSURE WALL MOUNT SEALING PLATE
CODE 2
WITH ENCLOSURE WALL MOUNT SEALING PLATE
CODE 3, 0.150 [3.81] CONTACT EXTENSION
Enclosure shown
for reference
0.150 [3.81] 0.177 [4.50]
O-Ring Seal
0.080 [2.03] MAX.
20 AWG max.
[0.5 mm ]
2
0.257 [6.53]
0.135 [3.43]
0.080 [2.03] MAX.
0.150 [3.81] 0.177 [4.50]
Enclosure shown
for reference
O-Ring Seal
Swaged spacer with
push-on fasteners
Phosphor Bronze
INSIDE WALL
ENCLOSURE
MOUNT
9
5
6
1
Fixed female
jackscrews
Example Part Number:
WD9F2C5AT7U
1
5
69 25
1
14
13
WD9F WD25F
INSIDE WALL
ENCLOSURE
MOUNT
14
113
25
Fixed female
jackscrews
Example Part Number:
WD25F3C8AT7U
Available with female contacts Available with female contacts
Positronic is ready to support requirements for other D-subminiature connector variants. Consult Technical Sales.
WIN-D
Win-DD
Series Positronic Industries
connectpositronic.com
0.652 [16.56]
0.598
[15.19]
0.926 [23.52]
0.055
[1.40] TYP.
0.109
[2.77] TYP. 0.112
[2.84]
SYM.
25X ø0.045 [ø1.14]
2X 0.123±0.003
[ø3.12±0.08]
0.080 [2.03] max.
0.112 [2.84] Typ.
0.150 [3.81] D
O-Ring Seal
Enclosure shown
for reference
B
±0.008
[0.20]
A
C
0.177 [4.50]
Fixed female
jackscrews
ENVIRONMENTAL
D-SUBMINIATURE, IMPROVED
UNIBODY DESIGN
Example Part Number:
WD25F5C7AT7U
Suggest 0.045 [1.14] Ø hole for contact termination positions
Suggest 0.123 ±0.003 [3.12 ±0.08] Ø hole for mounting connector with push-on fasteners
90° PRINTED BOARD MOUNT CONNECTOR
WITH ENCLOSURE MOUNT SEALING PLATE
ORDERING CODE 5, 0.188 [4.78] CONTACT EXTENSION
WD9
90° AND STRAIGHT PRINTED BOARD
CONTACT HOLE PATTERN
Hole identification shown for female connector.
Mount connector with mating face positioned to follow direction of arrows.
13
25
12
24
11
23
10
22 21
98
20
7
19
6
18 17
5
16
4 3
15
2
14
1
ø0.028 [0.71] Typ.
Cul-de-sac Style
Threaded rivet
Numbering shown is rear
view of female connector
0.160 [4.06]
Nominal Push-on Fastener,
Beryllium Copper
0.112 [2.84]
SYM.
0.492 [12.50]
0.054 [1.37] TYP.
0.162 [4.11]
9X ø0.045 [ø1.14]
0.108 [2.74] TYP.
0.216 [5.49]
2X ø0.123±0.003
[ø3.12±0.08]
WD25
INSIDE WALL
ENCLOSURE
MOUNT
7
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
WD005C700U 0.188 [4.78] CONTACT EXTENSION
PART
NUMBER A B C D
WD905C700U 1.204
[30.58]
0.984
[24.99]
0.244
[6.20]
0.188
[4.78]
WD2505C700U 2.072
[52.63]
1.852
[47.04]
0.244
[6.20]
0.188
[4.78]
0.010 [0.25] MIN.
0.150 [3.81] ø0.020 [0.51] Typ.
0.130 [3.30]
O-Ring
Enclosure shown
for reference
0.080 [2.03] MAX.
0.150 [3.81] 0.177 [4.50]
O-Ring Seal
Swaged spacer with
push-on fasteners
Phosphor Bronze
18
26 19
910
1
Fixed female
jackscrews
22 AWG max.
[0.3 mm ]
2
Enclosure shown
for reference
O-Ring Seal
0.080 [2.03] MAX.
0.150 [3.81] 0.177 [4.50]
0.265 [6.73]
0.082 [2.08]
0.145 [3.68]
WIN-D
Win-DD
Series
ENVIRONMENTAL
D-SUBMINIATURE, IMPROVED
UNIBODY DESIGN
Positronic Industries
connectpositronic.com
8DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
INSIDE WALL
ENCLOSURE
MOUNT
INSIDE WALL
ENCLOSURE
MOUNT
Example Part Number:
WDD26F2C5AT7U
Example Part Number:
WDD26F3C8AT7U
SOLDER CUP CONNECTOR
WITH ENCLOSURE WALL MOUNT SEALING PLATE
CODE 2
STRAIGHT PRINTED BOARD MOUNT CONNECTOR
WITH ENCLOSURE WALL MOUNT SEALING PLATE
CODE 3, 0.150 [3.81] CONTACT EXTENSION
1
19
10
9
18
26
CONTACT VARIANTS
FACE VIEW OF FEMALE CONNECTOR
9
26
18
19
10
1
Fixed female
jackscrews
WDD26F
Available with female contacts
Positronic is ready to support requirements for other D-subminiature connector variants. Consult Technical Sales.
WIN-D
Win-DD
Series Positronic Industries
connectpositronic.com
ENVIRONMENTAL
D-SUBMINIATURE, IMPROVED
UNIBODY DESIGN
90° PRINTED BOARD MOUNT CONNECTOR
WITH ENCLOSURE MOUNT SEALING PLATE
CODE 4, 0.219 [5.56] CONTACT EXTENSION
90° AND STRAIGHT PRINTED BOARD
CONTACT HOLE PATTERN
Mount connector with mating face positioned to follow direction of arrows.
0.150 [3.81]
0.100 [2.54]
0.100 [2.54]
0.219 [5.56]
0.080 [2.03] max.
O-Ring Seal
c
losure shown
for reference
0.177 [4.50]
Fixed female
jackscrews 1.532
[38.91]
1.312±0.008
[33.32±0.20]
0.319 [8.10]
Example Part Number:
WDD26F4C7AT7U
Numbering shown is rear
view of female
Cul-de-sac Style
Threaded rivet
0.125 [3.18]
Nominal ø0.030 [0.76] Typ.
Push-on Fastener,
Beryllium Copper
1817
1615
14131211
10
98
76
5432
1
INSIDE WALL
ENCLOSURE MOUNT
C
0.090 [2.29] TYP.
L
A
A
1.312 [33.32]
0.656
[16.66]
0.385
[9.78]
L
C
2X ø0.123±0.003
[ø3.12±0.08]
C
9
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
CODE
NUMBER A C
40.100
[2.54]
0.045
[1.14]
30.078
[1.98]
0.035
[0.89]
O-Ring
Enclosure
0.080 [2.03] MAX.
0.150 [3.81]
Enclosure Mount
Sealing Plate
WIN-D
Win-DD
Series
ENVIRONMENTAL
D-SUBMINIATURE, IMPROVED
UNIBODY DESIGN
Positronic Industries
connectpositronic.com
10 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
CUL-DE-SAC STYLE MOUNTING ACCESSORIES
INSIDE WALL ENCLOSURE MOUNT
CONNECTOR TO ENCLOSURE WALL MOUNT SEALING PLATE
INSIDE WALL ENCLOSURE MOUNT
SEALING PLATE MATERIAL: GLASS FILLED THERMOPLASTIC
SEALING PLATE IS MOUNTED TO ENCLOSURE WALL WITH JACKSCREWS TORQUED TO
A VALUE OF 1.75 in-lb [0.20 Nm] MINIMUM, 8.00 in-lb [0.90 Nm] MAXIMUM
4-40 UNC
Threads
Water-tight
Sealing
0.130 [3.30]
0.150 [3.81]
Mounting Bracket
4-40 UNC
Threads
0.150 [3.81]
0.130 [3.30]
Water-tight
Sealing
4-40 UNC
Threads
0.150 [3.81]
0.130 [3.30]
Water-tight
Sealing
C5
STEEL, ZINC PLATE
WITH DICHROMATE SEAL OR
STAINLESS STEEL , PASSIVATED
C7
STEEL, ZINC PLATE
WITH DICHROMATE SEAL, OR
STAINLESS STEEL, PASSIVATED
C8
PHOSPHOR BRONZE,
TIN PLATE
4-40 UNC Threads
6
9
51
C±0.030
[0.76]
B
A±0.030 [0.76]
CONNECTOR
VARIANT A B C
WD9 1.550
[39.37]
0.984
[24.99]
0.830
[21.08]
WDD26 1.878
[47.70]
1.312
[33.32]
0.830
[21.08]
WD25 2.418
[61.42]
1.852
[47.04]
0.830
[21.08]
WIN-D
Win-DD
Series Positronic Industries
connectpositronic.com
ORDERING
INFORMATION
11
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
* Positronic is ready to support requirements
for other D-subminiature connector variants.
Consult Technical Sales.
STEP 3 - CONNECTOR GENDER
F Female contact
1 23456789
WD 9 F 3 C5 AT7 SU /AA
WDD 26 F 2 C5 AT7 SU /AA
10
STEP 1 - BASIC SERIES
WD and WDD Series
STEP 10 - SPECIAL OPTIONS
CONTACT TECHNICAL SALES
FOR SPECIAL OPTIONS
STEP 8 - SHELL AND ACCESSORY OPTIONS
U-Corrosion Protected Unibody Design
Steel shells and jackscrews zinc plated with
dichromate seal. Contacts gold flash over
nickel plate.
SU- Corrosion Resistant Unibody Design
Stainless steel shells and jackscrews
Contacts 0.000030 inch [0.75µ] gold plated
over nickel.
STEP 6 - ENCLOSURE WALL MOUNT
SEALING PLATE
A - Inside wall enclosure mounted connector.
STEP 5 - CUL-DE-SAC STYLE MOUNTING
ACCESSORIES
C5 - Inside wall mounting for Code 2 and 3 type contacts only.
C7 - Inside wall mounting for Code 4 and 5, 90° type contact
printed board mount only. Consists of an assembly of
angle bracket, alignment bar and push-on fastener.
C8 - Inside wall mounting for Code 3 type contacts only.
Includes push-on fastener.
STEP 4 - CONTACT TERMINATION TYPE
2 - Solder cup, use for both WD and WDD series.
3 - Solder, straight printed board mount with 0.150 [3.81]
tail length. Use for both WD and WDD series.
4 - Solder 90° printed board mount, for use with WDD
series only, contact extension 0.219 [5.56].
5 - Solder 90° printed board mount, for use with WD series
only, contact extension 0.188 [4.78].
STEP
EXAMPLE
PART NUMBERS
STEP 9 - ENVIRONMENTAL
COMPLIANCE
OPTIONS
/AA - Compliant per EU Directive
2002/95/EC (RoHS)
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
RoHS
RoHS
Compliant
STEP 7 - FEMALE FIXED JACKSCREWS
T7 - Mandatory for C5, C7 and C8 cul-de-sac mounting
accessories.
NOTE: Once you have made a connector selection, contact
Technical Sales if you would like to receive a drawing in
DXF, PDF format or a 3-dimensional IGES file.
SK Drawing 3-dimensional model
STEP 2 - CONNECTOR VARIANTS
WD Series Connector Variants
9 - Female only*
25 - Female only*
WDD Series Connector Variants
26 - Female only*
ORDERING INFORMATION - CODE NUMBERING SYSTEM
Specify Complete Connector By Selecting An Option From Step 1 Through 8
For Systems 1 & 2 Enclosure Mounted Connectors
WD and WDD Series
NOTE: If compliance to environmental
legislation is not required, this step will not be
used. Example: SGM26FSCN00J0
NORTH AMERICAN LOCATIONS
UNITED STATES, Springfield, Missouri, Corporate Headquarters
Factory Sales and Engineering Offices (800) 641-4054
PUERTO RICO, Ponce Factory
Factory Sales and Engineering Offices (800) 641-4054
MEXICO
Factory Sales and Engineering Offices (800) 872-7674
CANADA
Factory Sales and Engineering Offices (800) 327-8272
ASIA/PACIFIC LOCATIONS
SINGAPORE, Asia/Pacific Headquarters
Factory Sales and Engineering Offices (65) 6842-1419
ASIA, Direct Sales Offices
Taiwan Sales Office (88) 62-2937-8775
China Sales Office (86) 755-2643-7578
Korea Sales Office (82) 31-909-8047/8
JAPAN
Sales and Engineering Offices (81) 3-5812-7720
INDIA
Factory Sales and Engineering Offices (91) 20-2439-4810
ASIA/PACIFIC, Technical Agents
Technical Agents in Malaysia, Australia, New Zealand, Philippines,
Hong Kong, Vietnam, Thailand
EUROPEAN LOCATIONS
FRANCE, Auch Factory, European Headquarters
Factory Sales and Engineering Offices 33 (0)5 62 63 44 91
EUROPE, Direct Sales Offices
Northern France Sales Office 33 (0)1 45 88 13 88
Southern France Sales Office 33 (0)4 67 72 80 28
Italy Sales Office 39 (0)2 54 116 106
Northern Germany Sales Office 49 (0)30 34 504 307
Southern Germany Sales Office 49 (0)2351 63 47 39
EUROPE, Technical Agents
Technical Agents in Austria, Benelux, Eastern Europe Countries, Greece,
Ireland, Scandinavia, Spain, Switzerland and the United Kingdom
MIDEAST, Technical Agents
Technical Agents in Israel and Turkey
POSITRONIC INDUSTRIES, INC.
423 N Campbell Ave • PO Box 8247 • Springfield, MO 65801
Tel (417) 866-2322 • Fax (417) 866-4115 • Toll Free (800) 641-4054
info@connectpositronic.com
POSITRONIC INDUSTRIES, S.A.S.
Zone Industrielle d’Engachies • 46 Route d’Engachies
France 32020 Auch Cedex 9
Telephone 33 (0)5 62 63 44 91 • Fax 33 (0)5 62 63 51 17
contact@connectpositronic.com
POSITRONIC ASIA PTE LTD.
3014A Ubi Road 1 #07-01 • Singapore 408703
Telephone (65) 6842 1419 • Fax (65) 6842 1421
singapore@connectpositronic.com
www.connectpositronic.com