NEW Positronic Industries connectpositronic.com ENVIRONMENTAL D-SUBMINIATURE, IMPROVED UNIBODY DESIGN WIN-D Win-DD Series NEW ** One piece unibody housing eliminates need for sealants ** ** Standard and high density options ** ** Improved temperature range ** ** Increased performance ** ** Higher reliability ** ** Lower cost ** O NIC INDU Di * EC RoHS Compliant options available! 5/ U rE Compliant IES RoHS TR POS R S IT Protection" is adequate, contact surfaces are plated with gold flash over nickel. Shells and accessories are zinc plated with dichromate seal. The unibody design is offered in 9 and 25 contact female variants, and a 26 position female high density variant. A variety of solder terminated contacts and "culde-sac" accessories are available to meet specific application requirements. WIN-D and WIN-DD Series connectors conform to IEC 807-2 Performance Level 2 mechanical and dimensional requirements and conform to EIA RS232 and RS449 and CCITT X.24 interface standards. * pe WIN-D and WIN-DD series D-subminiature connectors have been a popular choice in applications with environmental considerations. WIN-D and WIN-DD environmental D-subminiature connectors achieve water and dust ingress protection to IP67. Positronic now offers a new "unibody" design. The unibody design eliminates the need to add sealants as a secondary operation. This allows more rapid manufacturing of the connector, which reduces cost. In addition, concern over differences in coefficients of expansion of dissimilar materials is minimized. This allows for improved performance and a wider operating temperature range. For extremely harsh environments, or where "Corrosion Resistance" is required, the contacts are supplied with extra gold plating thickness, and the connector shells and jackscrews are supplied in stainless steel. For applications where "Corrosion rec tive 2002 /9 POSITRONIC INDUSTRIES Springfield, Missouri USA * 800.641.4054 * Catalog C-006-1 Rev. A info@connectpositronic.com w w w . c o n n e c t p o s i t r o n i c . c o m WIN-D Win-DD Series TECHNICAL CHARACTERISTICS Positronic Industries connectpositronic.com Applicable IEC Moisture Tests ENVIRONMENTAL CHARACTERISTICS: WIN-D and WIN-DD series connectors mounted on IEC 529 or NEMA 250-1991 enclosures for electrical equipment. WIN-D and WIN-DD Connector Panel mount sealing plates, when mounted on the walls of enclosures, maintain the dust and water ingress protection rating of IEC 529 or NEMA 250 enclosure on which they are mounted. WIN-D and WIN-DD connector enclosure assemblies provide dust and water ingress protection to IP67, which allows temporary immersion in water to a depth of 1.0 meter for 30 minutes without ingress of water or dust to the enclosure. ENVIRONMENTAL TEST SPECIFICATIONS Applicable IEC Moisture Tests IP65 IEC 529 Test 14.2.5 - Spray nozzle 6.3 mm diameter, delivery rate 12.5 liters per minute, 1 minute duration of connector exposure to spray. When conducting this test on Portable Enclosure Connectors, the protective cover must be securely fastened over the face of the connector. IP67 IEC 529 Test 14.2.7 - Temporary immersion, 1.0 meter for 30 minutes. Requirements No water to have penetrated enclosure through connector. Applicable IEC Connector Tests After Moisture Exposure Tests Have Been Performed IEC 512-2, Test 3a - Insulation Resistance IEC 512-2, Test 4a - Voltage proof Limited water immersion testing was performed on virgin connectors before leaving our factory. We recommend that our environmental connectors be retested by our customers after a suitable period of time/temperature conditioning has taken place to determine the suitability of the connector for the application. We cannot predict service life of our connectors for all applications. Requirements Portable enclosure. 1 G ohm minimum insulation resistance after connector face and contacts are dried. Voltage proof 1,000 V rms. Requirements No water to have penetrated enclosure through connector. Products described within this catalog may be protected by one or more of the following US. patents: #4,721,472 #5,329,697 #4,900,261 #6,260,268 Patented in Canada, 1992 #5,255,580 #6,835,079 Other Patents Pending Unless otherwise specified, dimensional tolerances are: 1] 2] 3] 4] 0.001 0.003 0.005 0.015 inches inches inches inches [0.03 [0.08 [0.13 [0.38 mm] mm] mm] mm] for for for for male contact mating diameters. contact termination diameters. all other diameters. all other dimensions. Positronic Industries believes the data contained herein to be reliable. Since the technical information is given free of charge, the User employs such information at his own discretion and risk. Positronic Industries assumes no responsibility for results obtained or damages incurred from use of such information in whole or in part. Positronic Industries' FEDERAL SUPPLY CODE (Cage Code) FOR MANUFACTURERS is 28198 2 DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. WIN-D Win-DD Series TECHNICAL CHARACTERISTICS Positronic Industries connectpositronic.com MATERIALS AND FINISHES: MECHANICAL CHARACTERISTICS: Insulator: Nylon resin, UL 94V-0 black color. Fixed Contacts: Contacts: Female contacts - precision machined high tensile phosphor bronze. Contact Plating: WIN-DD Size 22 contact, female contact - rugged open entry design. "Corrosion Protection": gold flash over nickel plate. "Corrosion Resistant": gold plate 0.000030 inch [0.75 micron] over nickel plate. Shells and Jackscrew Systems and Cul-de-Sac Mounting Accessories: "Corrosion Protection": steel, zinc plated with dichromate seal. "Corrosion Resistant": stainless steel passivated. Push-on Fasteners: Phosphor bronze with tin plate. Angle Brackets: Brass, zinc plate with dichromate seal. Interfacial Seal: Elastomer or TPE. Panel Mount Sealing Plate Assembly: Protective cover over connector shell: Contact Retention in Insulator: 6 lbs. [27N] Contact Terminations: WIN-D Solder cup contacts - 0.042 inch [1.06 mm] minimum hole diameter for 20 AWG [0.5 mm2] wire maximum. Straight printed board mount - 0.028 inch [0.71 mm] diameter. 90 printed board mount - 0.028 inch [0.71 mm] diameter for all printed board contact footprints. WIN-D Solder cup contacts - 0.035 inch [0.89 mm] minimum hole diameter for 22 AWG [0.3 mm2] wire maximum. Straight printed board mount - 0.020 inch [0.5 mm] diameter. 90 printed board mount contact terminations 0.030 inch [0.76 mm] diameter. Glass filled thermoplastic with elastomer O-ring. Polarization: Conductive polyethylene or conductive polyester. Trapezoidally shaped shells. Enclosure Mounting Accessories: Cul-de-sac blind hole fasteners, angle brackets and push-on fasteners. Inside Wall Enclosure Mount: ELECTRICAL CHARACTERISTICS: 7.5 amperes nominal, size 20 contacts 5 amperes nominal, size 22 contacts Initial Contact Resistance: 0.010 ohms maximum. Insulator Resistance: 5 G ohms. Clearance and Creepage Distance Minimum: 0.039 inch [1mm]. Proof Voltage: 1000 V r.m.s. Working Voltage: 300 V r.m.s. Minimum thickness 0.040 inch [1.02 mm]. Maximum thickness 0.080 inch [2.03 mm]. Locking Systems: Jackscrews. Mechanical Operations: 500 operations minimum per IEC 512-5. Required Sealing Plate Mounting Torque: 1.75 in-lb. [0.20 Nm] minimum. 8.00 in-lb. [0.90 Nm] maximum. CLIMATIC CHARACTERISTICS: O NIC INDU Di * EC U rE Compliant IES * pe RoHS TR POS R -40C to +125C S IT Temperature Range: For RoHS options see page 11. 5/ Contact Current Rating: WIN-D Size 20 contact, female contact - rugged open entry design. rec tive 2002 /9 DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 3 Positronic Industries connectpositronic.com WIN-D Win-DD Series INGRESS PROTECTION CONNECTION SYSTEM Panel mount sealing plate, Inside wall enclosure mounting O-Ring FIXED ENCLOSURE MOUNTED CONNECTOR The connector is mounted on the portable enclosure. The mating connector is in a remote location and is non-environmental. Enclosure, IEC or NEMA Type Fixed Jackscrews Printed Board Protective Cover The system consists of an input/output connector mechanically mounted and sealed to a portable enclosure containing electrical equipment. The connector and enclosure together provide a degree of protection from dust and moisture in accordance with IEC or NEMA ingress protection requirements. The enclosure and connector may be exposed to dust, splashing water, intermittent rain, or limited water immersion during its outdoor use. When "Corrosion Resistance" is a requirement, the connector should be equipped with stainless steel shells and jackscrews, and contacts plated 0.000030 inch [0.75 microns] gold over nickel. The portable enclosure will be connected (down loaded) periodically to a non-environmental performance connector positioned in a dry and controlled atmosphere environment. CONNECTOR-ENCLOSURE UNIT ENVIRONMENTAL RATINGS IEC 529 Classification Designations Rated to IP67 Degree of Protection 4 NEMA Enclosure Types Approximate Equivalents of IP67 Degree of Protection IP67, "Corrosion Protected" Dust tight and limited effects of water immersion, 1.0 meter for 30 minutes. Corrosion protected with zinc plated dichromate sealed shells and jackscrews. Contacts plated gold flash over nickel. NEMA Types 3, 3R, 4 and 6 IP67, "Corrosion Resistance" Dust tight and limited effects of water immersion 1.0 meter for 30 minutes. Corrosion resistant with stainless steel shells and jackscrews. Contacts plated 0.000030 inch [0.75 microns] gold over nickel. NEMA Type 4X DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. WIN-D Win-DD Series ENVIRONMENTAL SEALING FEATURES OF UNIBODY DESIGN Positronic Industries connectpositronic.com ENCLOSURE MOUNTED CONNECTOR Panel Mount Sealing Plate Contacts have special water-tight force fit seal into insulator Female contact Front Shell O-Ring DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 5 ENVIRONMENTAL D-SUBMINIATURE, IMPROVED UNIBODY DESIGN Positronic Industries connectpositronic.com WIN-D Win-DD Series CONTACT VARIANTS FACE VIEW OF FEMALE CONNECTOR 5 13 1 9 1 25 6 14 WD25F WD9F Available with female contacts Available with female contacts Positronic is ready to support requirements for other D-subminiature connector variants. Consult Technical Sales. SOLDER CUP CONNECTOR WITH ENCLOSURE WALL MOUNT SEALING PLATE CODE 2 0.177 [4.50] 0.150 [3.81] 0.080 [2.03] MAX. Fixed female jackscrews 20 AWG max. [0.5 mm 2 ] INSIDE WALL ENCLOSURE MOUNT 1 5 6 9 O-Ring Seal Example Part Number: WD9F2C5AT7U Enclosure shown for reference 0.135 [3.43] 0.257 [6.53] STRAIGHT PRINTED BOARD MOUNT CONNECTOR WITH ENCLOSURE WALL MOUNT SEALING PLATE CODE 3, 0.150 [3.81] CONTACT EXTENSION 0.150 [3.81] 0.177 [4.50] Fixed female jackscrews 0.080 [2.03] MAX. O-Ring Seal INSIDE WALL ENCLOSURE MOUNT 13 1 25 14 Swaged spacer with push-on fasteners Phosphor Bronze Example Part Number: WD25F3C8AT7U O-Ring Enclosure shown for reference 0.130 [3.30] 0.010 [0.25] MIN. 6 DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 0.150 [3.81] o0.028 [0.71] Typ. ENVIRONMENTAL D-SUBMINIATURE, IMPROVED UNIBODY DESIGN WIN-D Win-DD Series Positronic Industries connectpositronic.com 90 PRINTED BOARD MOUNT CONNECTOR INSIDE WALL ENCLOSURE MOUNT WITH ENCLOSURE MOUNT SEALING PLATE ORDERING CODE 5, 0.188 [4.78] CONTACT EXTENSION 0.177 [4.50] WD005C700U B 0.008 [0.20] Fixed female jackscrews 0.188 [4.78] CONTACT EXTENSION PART NUMBER A WD905C700U WD2505C700U C D 1.204 [30.58] 2.072 [52.63] 0.984 [24.99] 1.852 [47.04] 0.244 [6.20] 0.244 [6.20] 0.188 [4.78] 0.188 [4.78] Numbering shown is rear view of female connector D O-Ring Seal B Example Part Number: WD25F5C7AT7U C 0.150 [3.81] A 0.112 [2.84] Typ. Cul-de-sac Style Threaded rivet 13 25 12 24 11 23 10 22 9 7 8 21 20 5 6 19 18 4 17 3 16 2 15 1 14 Enclosure shown for reference 0.160 [4.06] Nominal o0.028 [0.71] Typ. Push-on Fastener, Beryllium Copper 0.080 [2.03] max. 90 AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN Hole identification shown for female connector. Mount connector with mating face positioned to follow direction of arrows. SYM. SYM. 0.492 [12.50] 0.926 [23.52] 0.216 [5.49] 0.652 [16.56] 0.109 [2.77] TYP. 0.108 [2.74] TYP. 0.112 [2.84] 2X o0.1230.003 [o3.120.08] 9X o0.045 [o1.14] 0.054 [1.37] TYP. 0.162 [4.11] 2X 0.1230.003 [o3.120.08] 0.055 [1.40] TYP. 25X o0.045 [o1.14] WD9 Suggest 0.045 [1.14] O hole for contact termination positions Suggest 0.123 0.003 [3.12 0.08] O hole for mounting connector with push-on fasteners 0.112 [2.84] 0.598 [15.19] WD25 DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 7 Positronic Industries connectpositronic.com ENVIRONMENTAL D-SUBMINIATURE, IMPROVED UNIBODY DESIGN WIN-D Win-DD Series CONTACT VARIANTS FACE VIEW OF FEMALE CONNECTOR 1 9 10 18 26 Available with female contacts 19 WDD26F Positronic is ready to support requirements for other D-subminiature connector variants. Consult Technical Sales. SOLDER CUP CONNECTOR WITH ENCLOSURE WALL MOUNT SEALING PLATE CODE 2 0.150 [3.81] 0.177 [4.50] 0.080 [2.03] MAX. Fixed female jackscrews 22 AWG max. [0.3 mm 2 ] INSIDE WALL ENCLOSURE MOUNT 1 9 10 18 26 19 O-Ring Seal Example Part Number: WDD26F2C5AT7U Enclosure shown for reference 0.082 [2.08] 0.145 [3.68] 0.265 [6.73] STRAIGHT PRINTED BOARD MOUNT CONNECTOR WITH ENCLOSURE WALL MOUNT SEALING PLATE CODE 3, 0.150 [3.81] CONTACT EXTENSION 0.150 [3.81] 0.177 [4.50] 0.080 [2.03] MAX. O-Ring Seal Fixed female jackscrews INSIDE WALL ENCLOSURE MOUNT 1 9 10 18 26 Swaged spacer with push-on fasteners Phosphor Bronze 19 Example Part Number: WDD26F3C8AT7U Enclosure shown for reference O-Ring 0.130 [3.30] 0.010 [0.25] MIN. 8 DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 0.150 [3.81] o0.020 [0.51] Typ. ENVIRONMENTAL D-SUBMINIATURE, IMPROVED UNIBODY DESIGN WIN-D Win-DD Series Positronic Industries connectpositronic.com 90 PRINTED BOARD MOUNT CONNECTOR WITH ENCLOSURE MOUNT SEALING PLATE CODE 4, 0.219 [5.56] CONTACT EXTENSION INSIDE WALL ENCLOSURE MOUNT 0.177 [4.50] Fixed female jackscrews 1.3120.008 1.532 [33.320.20] [38.91] 0.319 [8.10] Example Part Number: WDD26F4C7AT7U 0.219 [5.56] Numbering shown is rear view of female 0.100 [2.54] 0.150 [3.81] 0.100 [2.54] O-Ring Seal Cul-de-sac Style Threaded rivet 1 10 2 11 3 12 4 13 5 14 6 15 7 16 8 17 9 18 closure shown for reference 0.125 [3.18] Nominal o0.030 [0.76] Typ. Push-on Fastener, Beryllium Copper 0.080 [2.03] max. 90 AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN Mount connector with mating face positioned to follow direction of arrows. CODE NUMBER 1.312 [33.32] 0.656 [16.66] CL 0.385 [9.78] A A C 4 0.100 [2.54] 0.045 [1.14] 3 0.078 [1.98] 0.035 [0.89] A CL 2X o0.1230.003 [o3.120.08] 0.090 [2.29] TYP. C DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 9 ENVIRONMENTAL D-SUBMINIATURE, IMPROVED UNIBODY DESIGN Positronic Industries connectpositronic.com WIN-D Win-DD Series CUL-DE-SAC STYLE MOUNTING ACCESSORIES INSIDE WALL ENCLOSURE MOUNT 0.150 [3.81] 0.130 [3.30] 0.150 [3.81] 0.130 [3.30] Water-tight Sealing Water-tight Sealing 4-40 UNC Threads 0.150 [3.81] 0.130 [3.30] 4-40 UNC Threads Water-tight Sealing 4-40 UNC Threads Mounting Bracket C5 C7 C8 STEEL, ZINC PLATE WITH DICHROMATE SEAL OR STAINLESS STEEL , PASSIVATED STEEL, ZINC PLATE WITH DICHROMATE SEAL, OR STAINLESS STEEL, PASSIVATED PHOSPHOR BRONZE, TIN PLATE CONNECTOR TO ENCLOSURE WALL MOUNT SEALING PLATE INSIDE WALL ENCLOSURE MOUNT Enclosure 4-40 UNC Threads O-Ring 1 5 C0.030 [0.76] 6 9 Enclosure Mount Sealing Plate B 0.080 [2.03] MAX. A0.030 [0.76] 0.150 [3.81] CONNECTOR VARIANT A B C WD9 1.550 [39.37] 0.984 [24.99] 0.830 [21.08] WDD26 1.878 [47.70] 1.312 [33.32] 0.830 [21.08] WD25 2.418 [61.42] 1.852 [47.04] 0.830 [21.08] 10 DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. SEALING PLATE MATERIAL: GLASS FILLED THERMOPLASTIC SEALING PLATE IS MOUNTED TO ENCLOSURE WALL WITH JACKSCREWS TORQUED TO A VALUE OF 1.75 in-lb [0.20 Nm] MINIMUM, 8.00 in-lb [0.90 Nm] MAXIMUM WIN-D Win-DD Series ORDERING INFORMATION Positronic Industries connectpositronic.com ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Selecting An Option From Step 1 Through 8 For Systems 1 & 2 Enclosure Mounted Connectors WD and WDD Series 1 2 3 4 5 6 7 8 9 WD 9 F 3 C5 A T7 SU /AA WDD 26 F 2 C5 A T7 SU /AA STEP EXAMPLE PART NUMBERS 10 STEP 1 - BASIC SERIES STEP 10 - SPECIAL OPTIONS WD and WDD Series CONTACT TECHNICAL SALES FOR SPECIAL OPTIONS STEP 2 - CONNECTOR VARIANTS Di 5/ U rE Compliant * RoHS EC IT NIC INDU IES POS O TR * pe WDD Series Connector Variants 26 - Female only* R S WD Series Connector Variants 9 - Female only* 25 - Female only* rec tive 200 9 2/ STEP 9 - ENVIRONMENTAL COMPLIANCE OPTIONS /AA - Compliant per EU Directive 2002/95/EC (RoHS) NOTE: If compliance to environmental legislation is not required, this step will not be used. Example: SGM26FSCN00J0 STEP 3 - CONNECTOR GENDER F - Female contact STEP 4 - CONTACT TERMINATION TYPE 2 - Solder cup, use for both WD and WDD series. 3 - Solder, straight printed board mount with 0.150 [3.81] tail length. Use for both WD and WDD series. 4 - Solder 90 printed board mount, for use with WDD series only, contact extension 0.219 [5.56]. 5 - Solder 90 printed board mount, for use with WD series only, contact extension 0.188 [4.78]. STEP 5 - CUL-DE-SAC STYLE MOUNTING ACCESSORIES C5 - Inside wall mounting for Code 2 and 3 type contacts only. C7 - Inside wall mounting for Code 4 and 5, 90 type contact printed board mount only. Consists of an assembly of angle bracket, alignment bar and push-on fastener. C8 - Inside wall mounting for Code 3 type contacts only. Includes push-on fastener. STEP 8 - SHELL AND ACCESSORY OPTIONS U - Corrosion Protected Unibody Design Steel shells and jackscrews zinc plated with dichromate seal. Contacts gold flash over nickel plate. SU- Corrosion Resistant Unibody Design Stainless steel shells and jackscrews Contacts 0.000030 inch [0.75] gold plated over nickel. STEP 7 - FEMALE FIXED JACKSCREWS T7 - Mandatory for C5, C7 and C8 cul-de-sac mounting accessories. STEP 6 - ENCLOSURE WALL MOUNT SEALING PLATE A - Inside wall enclosure mounted connector. NOTE: Once you have made a connector selection, contact Technical Sales if you would like to receive a drawing in DXF, PDF format or a 3-dimensional IGES file. * Positronic is ready to support requirements for other D-subminiature connector variants. Consult Technical Sales. SK Drawing 3-dimensional model DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE. 11 NORTH AMERICAN LOCATIONS UNITED STATES, Springfield, Missouri, Corporate Headquarters Factory Sales and Engineering Offices (800) 641-4054 PUERTO RICO, Ponce Factory Factory Sales and Engineering Offices (800) 641-4054 MEXICO Factory Sales and Engineering Offices (800) 872-7674 CANADA Factory Sales and Engineering Offices (800) 327-8272 ASIA/PACIFIC LOCATIONS SINGAPORE, Asia/Pacific Headquarters Factory Sales and Engineering Offices (65) 6842-1419 ASIA, Direct Sales Offices Taiwan Sales Office (88) 62-2937-8775 China Sales Office (86) 755-2643-7578 Korea Sales Office (82) 31-909-8047/8 Sales and Engineering Offices (81) 3-5812-7720 Factory Sales and Engineering Offices (91) 20-2439-4810 JAPAN INDIA ASIA/PACIFIC, Technical Agents Technical Agents in Malaysia, Australia, New Zealand, Philippines, Hong Kong, Vietnam, Thailand EUROPEAN LOCATIONS FRANCE, Auch Factory, European Headquarters Factory Sales and Engineering Offices 33 (0)5 62 63 44 91 EUROPE, Direct Sales Offices Northern France Sales Office 33 (0)1 45 88 13 88 Southern France Sales Office 33 (0)4 67 72 80 28 Italy Sales Office 39 (0)2 54 116 106 Northern Germany Sales Office 49 (0)30 34 504 307 Southern Germany Sales Office 49 (0)2351 63 47 39 EUROPE, Technical Agents Technical Agents in Austria, Benelux, Eastern Europe Countries, Greece, Ireland, Scandinavia, Spain, Switzerland and the United Kingdom MIDEAST, Technical Agents Technical Agents in Israel and Turkey POSITRONIC INDUSTRIES, INC. 423 N Campbell Ave * PO Box 8247 * Springfield, MO 65801 Tel (417) 866-2322 * Fax (417) 866-4115 * Toll Free (800) 641-4054 info@connectpositronic.com POSITRONIC INDUSTRIES, S.A.S. Zone Industrielle d'Engachies * 46 Route d'Engachies France 32020 Auch Cedex 9 Telephone 33 (0)5 62 63 44 91 * Fax 33 (0)5 62 63 51 17 contact@connectpositronic.com POSITRONIC ASIA PTE LTD. 3014A Ubi Road 1 #07-01 * Singapore 408703 Telephone (65) 6842 1419 * Fax (65) 6842 1421 singapore@connectpositronic.com w w w . c o n n e c t p o s i t r o n i c . c o m