GBL08-E351 - VISHAY - Datasheet.Technology

GBL005, GBL01, GBL02, GBL04, GBL06, GBL08, GBL10

www.vishay.com Vishay General Semiconductor

Revision: 11-Aug-2020 1Document Number: 88609

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Glass Passivated Single-Phase Bridge Rectifier

LINKS TO ADDITIONAL RESOURCES

FEATURES

• UL recognition file number E54214

• Ideal for printed circuit boards

• High surge current capability

• Typical IR less than 0.1 μA

• High case dielectric strength

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

General purpose use in AC/DC bridge full wave rectification

for monitor, TV, printer, SMPS, adapter, audio equipment,

and home appliances application.

MECHANICAL DATA

Case: GBL

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test

Polarity: as marked on body

Notes

(1) Unit mounted on 3.0" x 3.0" x 0.11" thick (7.5 cm x 7.5 cm x 0.3 cm) aluminum plate

(2) Unit mounted on PCB at 0.375" (9.5 mm) lead length and 0.5" x 0.5" (12 mm x 12 mm) copper pads

PRIMARY CHARACTERISTICS

IF(AV) 4 A

VRRM 50 V, 100 V, 200 V, 400 V, 600 V,

800 V, 1000 V

IFSM 150 A

IR5 μA

VF at IF = 4.0 A 1.0 V

TJ max. 150 °C

Package GBL

Circuit configuration In-line

Case Type GBL

3D Models

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 UNIT

Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V

Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V

Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V

Maximum average forward

rectified output current at

TC = 50 °C (1)

IF(AV) 4.0 A

TA = 40 °C (2) 3.0

Peak forward surge current single sine-wave

superimposed on rated load IFSM 150 A

Rating for fusing (t < 8.3 ms) I2t93A

Operating junction and storage temperature range TJ, TSTG -55 to +150 °C

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 UNIT

Maximum instantaneous

forward voltage drop per diode 4.0 A VF 1.0 V

Maximum DC reverse current

at rated DC blocking voltage

per diode

TA = 25 °C

5.0

μA

TA = 125 °C 500

Typical junction capacitance

per diode 4.0 V, 1 MHz CJ 95 40 pF

GBL005, GBL01, GBL02, GBL04, GBL06, GBL08, GBL10

www.vishay.com Vishay General Semiconductor

Revision: 11-Aug-2020 2Document Number: 88609

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Unit mounted on 3.0" x 3.0" x 0.11" thick (7.5 cm x 7.5 cm x 0.3 cm) aluminum plate

(2) Unit mounted on PCB at 0.375" (9.5 mm) lead length and 0.5" x 0.5" (12 mm x 12 mm) copper pads



RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Derating Curves Output Rectified Current

Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

Per Diode

Fig. 3 - Typical Forward Voltage Characteristics

Per Diode

Fig. 4 - Typical Reverse Characteristics

Per Diode

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 UNIT

Typical thermal resistance RJA (2) 22 °C/W

RJC (1) 3.5

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

GBL06-E3/45 2.18 45 20 Tube

GBL06-E3/51 2.18 51 400 Anti-static PVC tray

050 100 150

1.0

2.0

3.0

4.0

5.0

60 Hz Resistive or Inductive Load

Heat-Sink Mounting

3.0 x 3.0 x 0.11" Thick

(7.5 x 7.5 x 0.3 cm)

Aluminum Plate

PCB Mounted

0.47 x 0.47" (12 x 12 mm)

Copper Pads with 0.375"

(9.5 mm) Lead Length

Ambient Temperature (°C)

Average Forward Output Current (A)

110 100

100

150

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

TJ = TJ Max.

Single Sine-Wave

1.0 Cycle

0.4 0.6 0.81.0 1.2 1.4 1.6

0.01

0.1

100

Instantaneous Forward Voltage (V)

atnatsnI uroF s wC dra u)A( tner

= 25 °C

Pulse Width = 300 µs

1 % Duty Cycle

020 40 60 80100

0.01

0.1

100

1000

50 - 400 V

60 - 1000 V

TA = 125 °C

TA = 25 °C

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Current (µA)

GBL005, GBL01, GBL02, GBL04, GBL06, GBL08, GBL10

www.vishay.com Vishay General Semiconductor

Revision: 11-Aug-2020 3Document Number: 88609

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 5 - Typical Junction Capacitance Per Diode Fig. 6 - Typical Transient Thermal Impedance Per Diode

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

0.1 110 100

100

1000

50 - 400 V

600 - 1000 V

Reverse Voltage (V)

Junction Capacitance (pF)

TJ = 25 °C

f = 1.0 MHz

Vsig = 50 mVp-p

0.01 0.1 110 100

0.1

100

t - Heating Time (s)

Transient Thermal Impedance (°C/W)

Case Type GBL

0.125 (3.17) x 45°

Chamfer

0.825 (20.9)

0.815 (20.7)

0.421 (10.7)

0.411 (10.4)

0.718 (18.2)

0.682 (17.3)

0.098 (2.5)

0.075 (1.9)

Lead Depth

0.022 (0.56)

0.018 (0.46)

0.210 (5.3)

0.190 (4.8)

0.040 (1.02)

0.030 (0.76) 0.140 (3.56)

0.128 (3.25)

0.022 (0.56)

0.018 (0.46)

0.050 (1.27)

0.040 (1.02)

0.098 (2.5)

0.075 (1.9)

0.095 (2.41)

0.080 (2.03)

0.060 (1.50)

Polarity shown on front side of case, positive lead beveled corner

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.