Certificate TH97/10561QM ZPD2.7 - ZPD75 Certificate TW00/17276EM ZENER DIODES DO - 35 Glass (DO-204AH) VZ : 2.7 to 75V PD : 500mW FEATURES : 1.00 (25.4) min. 0.079(2.0 )max. * Silicon planar zener diodes. * Standard zener voltage tolerance is 5%. * Other tolerances are available upon request. * These diodes are also available in MiniMELF case with the type designation ZMM2.7 ... ZMM75. * Pb / RoHS Free 0.150 (3.8) max. Cathode Mark 1.00 (25.4) min. 0.020 (0.52)max. MECHANICAL DATA : * Case: DO-35 Glass Case * Weight: approx. 0.13g Dimensions in inches and ( millimeters ) Maximum Ratings and Thermal Characteristics Rating at 25 C ambient temperature unless otherwise specified . Parameter Symbol Value Unit Zener Current see Table "Characteristics" Power Dissipation Thermal Resistance Junction to Ambient Air (1) mW (2) C/W PD 500 RJA 300 Junction temperature TJ 175 C Storage temperature range TS -65 to + 175 C Notes: (1) Valid provided that leads at a distance of 8mm from case are kept at ambient temperature. (2) Valid provided that leads at a distance of 4mm from case are kept at ambient temperature. Page 1 of 2 Rev. 03 : November 20, 2006 Certificate TH97/10561QM Certificate TW00/17276EM ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specifie Type Zener Voltage VZ @ I ZT 1) IZT Nom Dynamic Resistance at IZ=5mA at IZ=1mA f = 1 kHz rzj () 5 f = 1 kHz rzj () 75 (< 83) 80 (< 95) 5 80 (< 95) 3.6 5 80 (< 95) ZPD3.9 3.9 5 ZPD4.3 4.3 5 ZPD4.7 4.7 ZPD5.1 5.1 ZPD5.6 (V) (mA) ZPD2.7 2.7 5 ZPD3.0 3.0 ZPD3.3 3.3 ZPD3.6 Reverse Temp. coefficient Admissible of Zener Voltage at I ZT Zener Current Voltage -4 at IR = 100 nA IZ vz (10 / C) VR (V) min. max. (mA) < 500 - -9 -4 160 < 500 - -9 -3 140 < 500 - -8 -3 130 < 500 - -8 -3 120 80 (< 95) < 500 - -7 -3 110 80 (< 95) < 500 - -6 -1 100 5 70 (< 78) < 500 - -5 +2 90 5 30 (< 60) < 480 > 0.8 -3 +4 80 5.6 5 10 (< 40) < 400 >1 -2 +6 70 ZPD6.2 6.2 5 4.8 (< 10) < 200 >2 -1 +7 64 ZPD6.8 6.8 5 4.5 (< 8) < 150 >3 +2 +7 58 ZPD7.5 7.5 5 4 (< 7) < 50 >5 +3 +7 53 ZPD8.2 8.2 5 4.5 (< 7) < 50 >6 +4 +7 47 ZPD9.1 9.1 5 4.8 (< 10) < 50 >7 +5 +8 43 ZPD10 10 5 5.2 (< 15) < 70 > 7.5 +5 +8 40 ZPD11 11 5 6 (< 20) < 70 > 8.5 +5 +9 36 ZPD12 12 5 7 (< 20) < 90 >9 +6 +9 32 ZPD13 13 5 9 (< 25) < 110 > 10 +7 +9 29 ZPD15 15 5 11 (< 30) < 110 > 11 +7 +9 27 ZPD16 16 5 13 (< 40) < 170 > 12 +8 +9.5 24 ZPD18 18 5 18 (< 50) < 170 > 14 +8 +9.5 21 ZPD20 20 5 20 (< 50) < 220 > 15 +8 +10 20 ZPD22 22 5 25 (< 55) < 220 > 17 +8 +10 18 ZPD24 24 5 28 (< 80) < 220 > 18 +8 +10 16 ZPD27 27 5 30 (< 80) < 250 > 20 +8 +10 14 ZPD30 30 5 35 (< 80) < 250 > 22.5 +8 +10 13 ZPD33 33 5 40 (< 80) < 250 > 25 +8 +10 12 ZPD36 36 5 40 (< 90) < 250 > 27 +8 +10 11 ZPD39 39 5 50 (< 90) < 300 > 29 +10 +12 10 ZPD43 43 5 60 (< 100) < 700 > 32 +10 +12 9.2 ZPD47 47 5 70 (< 100) < 750 > 35 +10 +12 8.5 ZPD51 51 5 70 (< 100) < 750 > 38 +10 +12 7.8 ZPD56 56 2.5 < 135(3) < 1000(4) - +10 (typ.) - ZPD62 62 2.5 < 150(3) < 1000(4) - + 10 (typ.) - (3) (4) ZPD68 68 2.5 < 200 < 1000 - + 10 (typ.) - ZPD75 75 2.5 < 250(3) <1500(4) - + 10 (typ.) - Notes : (1) Tested with pulses tp = 5 ms (2) Valid provided that leads at a distance of 4 mm from case are kept at ambient temperature. (3) at IZ = 2.5mA (4) at IZ = 0.5mA (5) The type number listed have a standard tolerance on the nominal zener voltage of 5.0%. Page 2 of 2 Rev. 03 : November 20, 2006