112
ALUMINUM ELECTROLYTIC CAPACITOR(CD71 NP)
SPECIFICATIONS
NP NP FEATURE
Non - polarity standard for radial lead type
Ideally Suited for exchange polarity circuits
MULTIPLIER FOR RIPPLE CURRENT
Frequency coefficient
TEMPERATURE COEFFICIENT
()
Ambient Temperature +85 +70 +50
Factor 1.0 1.6 2.0
1000 F 1000 F 0.02
When capacitance is over 1000 tan shall be added 0.02 with increase of every 1000 F
(120Hz)
Impedance Ratio
Item Performance Characteristics
Nominal Capacitance Range 0.1 F 4700 F
Capacitance Tolerance 20%(M,+20 ,120Hz)
Leakage Current
2 I 0.01CV 3 A( )20
After application of rated voltage for 2 minutes: I 0.01CV or 3 A(Whichever is greater)20
(tan )
Dissipation Factor
(V) Rated Working Voltage
Temperature Stability
(V)
Rated Working Voltage
Load Life :
Leakage current: Less than the initial specified value
25%
Within 25% of the initial measured value
Capacitance Change:
:
:Tan
Shelf Life
+85 500
After leaving capacitors under no load at +85 for 500 hours, capacitors meet the
characteristics listed above
6.3V.DC-100V.DC
Operating Temperature Range
-40 ~+85
Rated Voltage Range
C: ( F); C: Nominal Capacitance in F;
V: (V) V: Rated Working Voltage in V
6.3 10 16 25 35 50 63 100
tan (MAX)(20 ,120Hz) 0.24 0.24 0.20 0.20 0.16 0.14 0.12 0.10
6.3 10 16 25 35 50 63 100
432
10 8 6 43
+85 500X2
:
After application of rated working voltage and maximum permissible ripple current specified at +85
for 500 2 hours, capacitors meet the characteristics requirements measured at +20 listed below
Less than 200% of the initial specified value
200%
Freq(Hz)
Cap( F)
50(60) 100(120) 1k 10k
0.1~47 0.8 1.0 1.30 1.50
68~1000 0.8 1.0 1.15 1.20
2200~4700 0.8 1.0 1.10 1.15