www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31010
130 Revision: 29-Aug-07
RCWPM (Military M/D55342)
Vishay Dale
Thick Film Chip Resistors, Military/Established Reliability
MIL-PRF-55342 Qualified, Type RM
FEATURES
•Fully conforms to the requirements of MIL-PRF-55342
•
Established reliability - Verified failure rate; M, P, R, S and T
levels
•Operating temperature range is - 55 °C to + 150 °C
•100 % Group A screening per MIL-PRF-55342
•
Termination Style B - Tin/Lead wraparound over nickel
barrier
Note:
1. Power rating based on a ceramic test board, see appropriate Mil Slash Sheet for power ratings based on a fiber test board.
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE
MODEL
MIL-PRF-55342
STYLE
MIL
SPEC.
SHEET
TERM.
POWER
RATING
P70 °C
W
MAXIMUM
OPERATING
VOLTAGE
CHAR. TOLERANCE
%
RESISTANCE
RANGE
Ω
RCWPM-0502 RM0502 01 B 0.02 40 M
K, M
± 2 to ± 10
± 1 to ± 10
1 - 9.1
10 - 22M
RCWPM-550 RM0505 02 B 0.055 40 K, M ± 1 to ± 10 1 - 22M
RCWPM-5100 RM1005 03 B 0.10 40 K, M ± 1 to ± 10 1 - 22M
RCWPM-5150 RM1505 04 B 0.15 40 K, M ± 1 to ± 10 1 - 22M
RCWPM-7225 RM2208 05 B 0.225 40 K, M ± 1 to ± 10 1 - 22M
RCWPM-575 RM0705 06 B 0.10 50 K, M ± 1 to ± 10 1 - 22M
RCWPM-1206 RM1206 07 B 0.25 100 K, M ± 1 to ± 10 1 - 22M
RCWPM-2010 RM2010 08 B 0.801) 150 K, M ± 1 to ± 10 1 - 22M
RCWPM-2512 RM2512 09 B 1.01) 200 K, M ± 1 to ± 10 1 - 22M
RCWPM-1100 RM1010 10 B 0.501) 75 K, M ± 1 to ± 10 1 - 22M
RCWPM-0402 RM0402 11 B 0.04 25 K, M ± 1 to ± 10 1 - 22M
RCWPM-0603 RM0603 12 B 0.07 50 K, M ± 1 to ± 10 1 - 22M
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M55342M02B10E0RWB (preferred part number format)
MIL
STYLE CHARACTERISTICS SPEC
SHEET TERMINATION
STYLE VALUE AND
TOLERANCE FAILURE
RATE PACKAGING SPECIAL
D55342
applies to
Style 07
(RM1206)
only.
M55342
applies to
all other
styles.
K
= 100 ppm
M
= 300 ppm (see Standard
Electrical
Specifications
table)
B
= Pre-tinned
Nickel Barrier,
wraparound
(see Tolerance
and Multipliers
table)
C
= Non-ER
M
= 1.0 %/1000 hours
P
= 0.1 %/1000 hours
R
= 0.01 %/1000 hours
S
= 0.001 %/1000 hours
T
= Space Level
TP
= Tin/Lead,
T/R (Full)
S3
= Tin/Lead,
T/R (1000 pieces)
WB
= Tin/Lead,
Tray
S2
= Tin/Lead,
T/R (500 pieces)
S6
= Tin/Lead,
T/R (300 pieces)
Blank = Standard
(Dash Number)
(up to 1 digits)
T
= Space
Level (-98)
Historical Part Numbering: M55342M02B10E0R (will continue to be accepted)
M55342 M 02 B 10E0 R WB
MIL
STYLE CHARACTERISTICS SPEC SHEET TERMINATION
STYLE VALUE AND
TOLERANCE FAILURE
RATE PA C K AG I N G
CODE
55342M02MB10E0R W B
Document Number: 31010 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 29-Aug-07 131
RCWPM (Military M/D55342)
Thick Film Chip Resistors, Military/Established Reliability
MIL-PRF-55342 Qualified, Type RM Vishay Dale
DIMENSIONS in inches [millimeters]
D
C
AE
B
VISHAY DALE
MODEL
MIL-PRF-55342
STYLE
MIL.
SPEC.
SHEET
A
(Length)
B
(Width)
C
(Height)
D
(Top Term)
E
(Bottom Term)
RCWPM-0502 RM0502 01 0.055 ± 0.005
[1.40 ± 0.13]
0.023 ± 0.003
[0.58 ± 0.08]
0.015 ± 0.003
[0.38 ± 0.08]
0.010 ± 0.005
[0.25 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-550 RM0505 02 0.055 ± 0.005
[1.40 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.010 ± 0.005
[0.25 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-5100 RM1005 03 0.105 ± 0.005
[2.67 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-5150 RM1505 04 0.155 ± 0.005
[3.94 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-7225 RM2208 05 0.230 ± 0.005
[5.84 ± 0.13]
0.075 ± 0.005
[1.91 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
RCWPM-575 RM0705 06 0.080 ± 0.005
[2.03 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-1206 RM1206 07 0.125± 0.005
[3.18 ± 0.13]
0.063 ± 0.005
[1.60 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-2010 RM2010 08 0.197 ± 0.006
[5.00 ± 0.15]
0.098 ± 0.005
[2.49 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
RCWPM-2512 RM2512 09 0.250 ± 0.006
[6.35 ± 0.15]
0.124 ± 0.005
[3.15 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
RCWPM-1100 RM1010 10 0.105 ± 0.005
[2.67 ± 0.13]
0.100 ± 0.005
[2.54 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-0402 RM0402 11 0.039 ± 0.003
[0.99 ± 0.08]
0.020 ± 0.003
[0.51 ± 0.08]
0.013 ± 0.003
[0.33 ± 0.08]
0.010 ± 0.005
[0.25 ± 0.13]
0.010 ± 0.005
[0.25 ± 0.13]
RCWPM-0603 RM0603 12 0.063 ± 0.005
[1.60 ± 0.13]
0.032 ± 0.005
[0.81 ± 0.13]
0.018 ± 0.005
[0.46 ± 0.13]
0.012 ± 0.005
[0.31 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
Derating
- 55 - 25 75 100 125 150175
120
100
80
60
40
20
0
Ambient Temperature in °C
70
Rated Power in %
05025
CAGE CODE: 91637 and SH903
RESISTANCE TOLERANCE AND MULTIPLIERS
TOLERANCE
MULTIPLIER VALUE
RANGE (OHMS)
± 1 % ± 2 % ± 5 % ± 10 %
DG J M 1 1 - 9xx
E H K N 1000 1K - 9xxK
F T L P 1 000 000 1M - 22M
Examples: 11D3 = 11.3 Ω ± 1 %
10E0 = 10 kΩ ± 1 %
332D = 332 Ω ± 1 %
2F21 = 2.21 MΩ ± 1 %
51G0 = 51 Ω ± 2 %
10H0 = 10 kΩ ± 2 %
33H0 = 33 kΩ ± 2 %
22T0 = 22 MΩ ± 2 %
15J0 = 15 Ω ± 5 %
10K0 = 10 kΩ ± 5 %
560K = 560 kΩ ± 5 %
8L20 = 8.2 MΩ ± 5 %
10M0 = 10 Ω ± 10 %
10N0 = 10 kΩ ± 10 %
2P70 = 2.7 MΩ ± 10 %
8P20 = 8.2 MΩ ± 10 %
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
