74LCX244 Low-Voltage Buffer/Line Driver with 5V Tolerant Inputs and Outputs General Description Features The LCX244 contains eight non-inverting buffers with TRI-STATEE outputs. The device may be employed as a memory address driver, clock driver and bus-oriented transmitter/receiver. The LCX244 is designed for low voltage (3.3V) VCC applications with capability of interfacing to a 5V signal environment. The LCX244 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. Y Y Y Y Y Y Y Y Y Y 5V tolerant inputs and outputs 6.5 ns tPD max, 10 mA ICCQ max Power down high impedance inputs and outputs Supports live insertion/withdrawal 2.0V - 3.6V VCC supply operation g 24 mA output drive Implements patented Quiet SeriesTM noise/EMI reduction circuitry Functionally compatible with the 74 series 244 Latch-up performance exceeds 500 mA ESD performance: Human body model l 2000V Machine model l 200V Logic Symbol Connection Diagram Pin Assignment for SOIC, SSOP and TSSOP IEEE/IEC TL/F/11994 - 1 Pin Names OE1, OE2 I0 - I7 O0 - O7 TL/F/11994 - 2 Description TRI-STATE Output Enable Inputs Inputs Outputs Truth Tables Inputs OE1 In L L H L H X H e HIGH Voltage Level Outputs (Pins 12, 14, 16, 18) Inputs OE2 In L L H L H X L H Z X e Immaterial L e LOW Voltage Level SOIC JEDEC Order Number Outputs (Pins 3, 5, 7, 9) L H Z Z e High Impedance SOIC EIAJ SSOP Type II TSSOP JEDEC 74LCX244WM 74LCX244SJ 74LCX244MSA 74LCX244MTC 74LCX244WMX 74LCX244SJX 74LCX244MSAX 74LCX244MTCX See NS Package Number M20B M20D MSA20 MTC20 TRI-STATEE is a registered trademark of National Semiconductor Corporation. Quiet SeriesTM is a trademark of National Semidonductor Corproation. C1996 National Semiconductor Corporation TL/F/11994 RRD-B30M17/Printed in U. S. A. http://www.national.com 74LCX244 Low-Voltage Buffer/Line Driver with 5V Tolerant Inputs and Outputs December 1996 Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Symbol Parameter Value VCC Supply Voltage b 0.5 to a 7.0 VI DC Input Voltage b 0.5 to a 7.0 VO DC Output Voltage b 0.5 to a 7.0 Conditions Units V V Output in TRI-STATE b 0.5 to VCC a 0.5 V Output in High or Low State (Note 2) V IIK DC Input Diode Current b 50 VI k GND mA IOK DC Output Diode Current b 50 a 50 VO k GND VO l VCC mA IO DC Output Source/Sink Current ICC DC Supply Current per Supply Pin IGND DC Ground Current per Ground Pin TSTG Storage Temperature g 50 mA g 100 mA g 100 mA b 65 to a 150 C Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the ``Electrical Characteristics'' table are not guaranteed at the Absolute Maximum Ratings. The ``Recommended Operating Conditions'' table will define the conditions for actual device operation. Note 2: IO Absolute Maximum Rating must be observed. Recommended Operating Conditions Symbol Parameter VCC Supply Voltage Operating Data Retention VI Input Voltage VO Output Voltage HIGH or LOW State TRI-STATE IOH/IOL Output Current VCC e 3.0V b 3.6V VCC e 2.7V TA Free-Air Operating Temperature Dt/DV Input Edge Rate, VIN e 0.8V-2.0V, VCC e 3.0V Min Max Units 2.0 1.5 3.6 3.6 V 0 5.5 V 0 0 VCC 5.5 V g 24 g 12 mA b 40 85 C 0 10 ns/V DC Electrical Characteristics Symbol Parameter Conditions VCC (V) VIH HIGH Level Input Voltage 2.7 - 3.6 VIL LOW Level Input Voltage 2.7 - 3.6 VOH HIGH Level Output Voltage VOL LOW Level Output Voltage TA e b40 C to a 85 C Min Units Max 2.0 V 0.8 V IOH e b100 mA 2.7 - 3.6 VCC b 0.2 V IOH e b12 mA 2.7 2.2 V IOH e b18 mA 3.0 2.4 V IOH e b24 mA 3.0 2.2 V IOL e 100 mA 2.7 - 3.6 0.2 V IOL e 12 mA 2.7 0.4 V IOL e 16 mA 3.0 0.4 V IOL e 24 mA 3.0 0.55 V II Input Leakage Current 0 s VI s 5.5V 2.7 - 3.6 g 5.0 mA IOZ TRI-STATE Output Leakage 0 s VO s 5.5V VI e VIH or VIL 2.7 - 3.6 g 5.0 mA IOFF Power-Off Leakage Current ICC Quiescent Supply Current VI or VO e 5.5V VI e VCC or GND DICC Increase in ICC per Input http://www.national.com 0 10 mA 2.7 - 3.6 10 mA 3.6V s VI, VO s 5.5V 2.7 - 3.6 g 10 mA VIH e VCC b0.6V 2.7 - 3.6 500 mA 2 AC Electrical Characteristics TA e b40 C to a 85 C Symbol Parameter VCC e 3.3V g 0.3V Units VCC e 2.7V Min Max Min Max tPHL tPLH Propagation Delay Data to Output 1.5 1.5 6.5 6.5 1.5 1.5 7.5 7.5 ns tPZL tPZH Output Enable Time 1.5 1.5 8.0 8.0 1.5 1.5 9.0 9.0 ns tPLZ tPHZ Output Disable Time 1.5 1.5 7.0 7.0 1.5 1.5 8.0 8.0 ns tOSHL tOSLH Output to Output Skew (Note 1) 1.0 1.0 ns Note 1: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH to LOW (tOSHL) or LOW to HIGH (tOSLH). Dynamic Switching Characteristics Symbol Parameter Conditions VCC (V) TA e 25 C Units Typical VOLP Quiet Output Dynamic Peak VOL CL e 50 pF, VIH e 3.3V, VIL e 0V 3.3 0.8 V VOLV Quiet Output Dynamic Valley VOL CL e 50 pF, VIH e 3.3V, VIL e 0V 3.3 b 0.8 V Capacitance Typical Units CIN Symbol Input Capacitance Parameter VCC e Open, VI e 0V or VCC Conditions 7 pF COUT Output Capacitance VCC e 3.3V, VI e 0V or VCC 8 pF CPD Power Dissipation Capacitance VCC e 3.3V, VI e 0V or VCC, F e 10 MHz 25 pF 3 http://www.national.com 74LCX244 Ordering Information The device number is used to form part of a simplified purchasing code where the package type and temperature range are defined as follows: TL/F/11994 - 4 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead (0.300x Wide) Molded Small Outline Package, JEDEC Order Number 74LCX244WM or 74LCX244WMX NS Package Number M20B http://www.national.com 4 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead (0.300x Wide) Molded Small Outline Package, EIAJ Order Number 74LCX244SJ or 74LCX244SJX NS Package Number M20D All dimensions are in millimeters. 20-Lead Molded Shrink Small Outline Package, EIAJ, Type II Order Number 74LCX244MSA or 74LCX244MSAX NS Package Number MSA20 5 http://www.national.com 74LCX244 Low-Voltage Buffer/Line Driver with 5V Tolerant Inputs and Outputs Physical Dimensions All dimensions are in millimeters (Continued) 20-Lead Thin Shrink Small Outline Package, JEDEC Order Number 74LCX244MTC or 74LCX244MTCX NS Package Number MTC20 LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 Email: support @ nsc.com http://www.national.com 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: a49 (0) 180-530 85 86 Email: europe.support @ nsc.com Deutsch Tel: a49 (0) 180-530 85 85 English Tel: a49 (0) 180-532 78 32 Fran3ais Tel: a49 (0) 180-532 93 58 Italiano Tel: a49 (0) 180-534 16 80 National Semiconductor Southeast Asia Fax: (852) 2376 3901 Email: sea.support @ nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-7561 Fax: 81-3-5620-6179 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.