Low ESR MnO2 Tantalum Surface Mount Capacitors T495 Surge Robust Low ESR MnO2 Series Overview The low ESR, surge-robust T495 Series is designed for demanding applications that require high surge current and high ripple current capability. This series builds upon the proven capabilities of our industrial grade tantalum chip capacitors to offer several advantages such as low ESR, high ripple current capability, excellent capacitance stability, and improved resistance to high in-rush currents. These benefits are achieved though a combination of proprietary design, materials, and process parameters as well as high-stress, low impedance electrical conditioning performed prior to screening. Benefits Applications * * * * * * * * * * * * * * Typical applications include decoupling and filtering in industrial and automotive end applications, such as DC/DC converters, portable electronics, telecommunications, and control units requiring high ripple current capability. Meets or exceeds EIA Standard 535BAAC Taped and reeled per EIA 481-D High surge current capability Optional gold-plated terminations High ripple current capability 100% surge current test on C, D, E, U, V, X sizes 100% steady-state accelerated aging Capacitance values of 0.1 F to 1,000 F Tolerances of 10% and 20% Voltage rating of 2.5 - 50 VDC Extended range values Available tested to DSCC 95158 RoHS Compliant and lead-free terminations Operating temperature range of -55C to +125C Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder SPICE For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 1 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Ordering Information T 495 X 107 M 010 A T E045 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material ESR Surge Robust Low ESR A = 3216-18 B = 3528-21 C = 6032-28 D = 7343-31 E = 7260-38 T = 3528-12 V = 7343-20 X = 7343-43 First two digits represent significant figures. Third digit specifies number of zeros. K = 10% M = 20% T= Tantalum 2R5 = 2.5 V 004 = 4 V 006 = 6.3 V 010 = 10 V 016 = 16 V 020 = 20 V 025 = 25 V 035 = 35 V 050 = 50 V A = N/A T = 100% Matte Tin (Sn) Plated H = Standard Solder Coated (SnPb 5% Pb minimum) G = Gold Plated (A, B, C, D, X only) Packaging (C-Spec) Last three digits Blank = 7" Reel specify ESR in 7280 = 13" Reel m. (45 = 45 m) Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 125C 0.47 - 1,000 F @ 120 Hz/25C K Tolerance (10%), M Tolerance (20%) 2.5 - 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01 CV (A) at rated voltage after 5 minutes (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 2 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Qualification Test Condition Characteristics C/C Endurance Storage Life Thermal Shock Temperature Stability 85C @ rated voltage, 2,000 hours. 125C @ 2/3 rated voltage, 2,000 hours. 125C @ 0 volts, 2,000 hours. MIL-STD-202, Method 107, Condition B, mounted, -55C to 125 C, 1,000 cycles. Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +125C, +25C. DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25C -55C +85C +125C C/C IL* 10% 10% 20% DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL C/C Surge Voltage Mechanical Shock/Vibration Within 10% of initial value 25C and 85C, 1.32 x rated voltage 1,000 cycles (125C, 1.2 x rated voltage). MIL-STD-202, Method 213, Condition I, 100 G peak MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit Certification KEMET's Internal Qualification Plan for this Tantalum series of capacitors follows AEC-Q200 guidelines. Standard catalog part types ordered without a specific automotive designator, i.e., suffix AUTO or four digit customer specific designator (C-Spec), are not considered KEMET Automotive Grade tantalum capacitors. DSCC Drawing 95158 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 3 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 1000 10 T495C476M016ATE350_IMP T495C476M016ATE350 T495D157M016ATE085_IMP T495D157M016ATE085 T495X227M016ATE100 T495X227M016ATE100_IMP Capacitance (F) Impedance, ESR (Ohms) 100 T495C476M016ATE350_ESR T495D157M016ATE085_ESR T495X227M016ATE100_ESR 1 100 10 0.1 0.01 1 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions - Millimeters (Inches) Metric will govern Termination cutout at KEMET's option, either end Case Size Component F* 0.1 S* 0.3 B* 0.15 (.004) (.012) (Ref) .006 KEMET EIA L* W* H* X (Ref) P (Ref) R (Ref) A 3216-18 3.2 0.2 (.126 .008) 1.6 0.2 (.063 .008) 1.6 0.2 (.063 .008) 1.2 (.047) 0.8 (.031) B 3.5 0.2 3528-21 (.138 .008) 2.8 0.2 (.110 .008) 1.9 0.2 (.075 .008) 2.2 (.087) 0.8 (.031) C 6032-28 6.0 0.3 (.236 .03) 3.2 0.3 (.126 .012) 2.5 0.3 (.098 .012) 2.2 (.087) D 7.3 0.3 7343-31 (.287 .012) 4.3 0.3 (.169 .012) 2.8 0.3 (.110 .012) 2.4 (.094) X 7.3 0.3 7343-43 (.287 .012) 4.3 0.3 (.169 .012) 4.0 0.3 (.157 .012) 2.4 (.094) E 7.3 0.3 7260-38 (.287 .012) 6.0 0.3 (.236 .012) 3.6 0.2 (.142 .008) T 3.5 0.2 3528-12 (.138 .008) 2.8 0.2 (.110 .008) V 7.3 0.3 7343-20 (.287 .012) 4.3 0.3 (.169 .012) T (Ref) A (Min) G (Ref) E (Ref) 0.4 (.016) 0.10 0.10 (.004 .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) 1.4 (.055) 0.4 (.016) 0.10 0.10 (.004 .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 ( (.122) 2.8 (.110) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 4.1 (.161) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 0.13 (.005) 3.5 (.138) 3.5 (.138) 1.2 (.047) 2.2 (.087) 0.8 (.031) N/A 0.05 (.002) N/A N/A 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087) 2.0 (.079) 2.4 (.094) 1.3 (.051) N/A 0.05 (.002) N/A N/A 0.13 (.005) 3.5 (.138) 3.5 (.138) 3.8 (.150) 1.1 (.043) 1.3 (.051) Notes: (Ref) - Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL-C-55365/8 specified dimensions (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 4 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size VDC F KEMET/EIA 2.5 2.5 2.5 2.5 220 470 1000 1000 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity D/7343-31 D/7343-31 X/7343-43 X/7343-43 (See below for part options) T495D227(1)2R5A(2)E045 T495D477(1)2R5A(2)E035 T495X108(1)2R5A(2)E030 T495X108(1)2R5A(2)E040 Amps +20C Max/5 Min 5.5 11.8 25.0 25.0 % @ +20C 120 Hz Max 8.0 8.0 15.0 15.0 m @ 20C 100 kHz Max 45 35 30 40 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1826 1643 730 2070 1863 828 2345 2111 938 2031 1828 812 Reflow Temp 260C 1 1 1 1 68 100 150 150 150 220 220 220 330 330 330 330 470 470 470 470 470 1000 1000 1000 1000 1000 1000 1000 V/7343-20 B/3528-21 B/3528-21 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7260-38 E/7260-38 T495V686(1)004A(2)E150 T495B107(1)004A(2)E500 T495B157(M)004A(2)E900 T495C157(1)004A(2)E070 T495C157(1)004A(2)E250 T495D227(1)004A(2)E040 T495D227(1)004A(2)E050 T495D227(1)004A(2)E100 T495C337(1)004A(2)E300 T495C337(1)004A(2)E700 T495D337(1)004A(2)E030 T495D337(1)004A(2)E045 T495D477(1)004A(2)E045 T495D477(1)004A(2)E100 T495X477(1)004A(2)E030 T495X477(1)004A(2)E045 T495X477(1)004A(2)E100 T495X108(1)004A(2)E030 T495X108(1)004A(2)E040 T495X108(1)004A(2)E060 T495X108(1)004A(2)E070 T495X108(1)004A(2)E090 T495E108(1)004A(2)E035 T495E108(1)004A(2)E050 2.7 4.0 6.0 6.0 6.0 8.8 8.8 8.8 13.2 13.2 13.2 13.2 18.8 18.8 18.8 18.8 18.8 40.0 40.0 40.0 40.0 40.0 40.0 40.0 6.0 8.0 12.0 12.0 8.0 8.0 8.0 8.0 10.0 12.0 8.0 8.0 12.0 12.0 8.0 8.0 8.0 12.0 12.0 12.0 12.0 12.0 15.0 15.0 150 500 900 70 250 40 50 100 300 700 30 45 45 100 30 45 100 30 40 60 70 90 35 50 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.8 10 10 10 47 47 47 68 68 100 100 100 100 100 100 100 100 100 150 150 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 C/6032-28 V/7343-20 D/7343-31 D/7343-31 B/3528-21 B/3528-21 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 C/6032-28 C/6032-28 VDC F KEMET/EIA T495A685(1)006A(2)E2K0 T495A106(1)006A(2)E1K0 T495A106(1)006A(2)E1K5 T495A106(1)006A(2)E2K0 T495B476(1)006A(2)E450 T495C476(1)006A(2)E250 T495V476(1)006A(2)E150 T495D686(1)006A(2)E175 T495D686(1)006A(2)4095 T495B107(1)006A(2)E400 T495B107(M)006A(2)E700 T495C107(1)006A(2)E075 T495C107(1)006A(2)E150 T495D107(1)006A(2)E050 T495D107(1)006A(2)E130 T495D107(1)006A(2)E150 T495V107(1)006A(2)E090 T495V107(1)006A(2)E150 T495C157(1)006A(2)E050 T495C157(M)006A(2)E200 (See below for part options) 0.5 0.6 0.6 0.6 3.0 3.0 3.0 4.3 4.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 9.5 9.5 Amps +20C Max/5 Min 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 15.0 15.0 8.0 8.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 % @ +20C 120 Hz Max 2000 1000 1500 2000 450 250 150 175 175 400 700 75 150 50 130 150 90 150 50 200 m @ 20C 100 kHz Max 194 175 78 274 247 110 224 202 90 194 175 78 435 392 174 663 597 265 913 822 365 926 833 370 926 833 370 461 415 184 348 313 139 1211 1090 484 856 770 342 1732 1559 693 1074 967 430 1000 900 400 1179 1061 472 913 822 365 1483 1335 593 742 668 297 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity 913 412 307 1254 663 1936 1732 1225 606 396 2236 1826 1826 1225 2345 1915 1285 2345 2031 1658 1535 1354 2390 2000 822 371 276 1129 597 1742 1559 1103 545 356 2012 1643 1643 1103 2111 1724 1157 2111 1828 1492 1382 1219 2151 1800 365 165 123 502 265 774 693 490 242 158 894 730 730 490 938 766 514 938 812 663 614 542 956 800 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2009_T495 * 9/19/2012 5 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size VDC F KEMET/EIA 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 150 150 150 150 150 150 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 1000 V/7343-20 V/7343-20 D/7343-31 D/7343-31 X/7343-43 X/7343-43 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 V/7343-20 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 E/7260-38 E/7260-38 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7260-38 E/7260-38 E/7260-38 E/7260-38 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 2.2 4.7 4.7 4.7 4.7 6.8 6.8 10 10 10 10 10 10 10 15 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 C/6032-28 T/3528-12 A/3216-18 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (See below for part options) T495V157(1)006A(2)E040 T495V157(1)006A(2)E070 T495D157(1)006A(2)E050 T495D157(1)006A(2)E125 T495X157(1)006A(2)E100 T495X157(1)006A(2)4095 T495C227(1)006(2)E225 T495D227(1)006A(2)E045 T495D227(1)006A(2)E100 T495D227(1)006A(2)4095 T495X227(1)006A(2)E070 T495X227(1)006A(2)E100 T495V227(1)006ATE150 T495X227(1)006A(2)4095 T495D337(1)006A(2)E040 T495D337(1)006A(2)E050 T495D337(1)006A(2)E070 T495D337(1)006A(2)E100 T495X337(1)006A(2)E065 T495X337(1)006A(2)E045 T495X337(1)006A(2)E100 T495E337(1)006A(2)E060 T495E337(1)006A(2)E100 T495D477(M)006A(2)E045 T495D477(1)006A(2)E100 T495D477(1)006A(2)E125 T495X477(1)006A(2)E030 T495X477(1)006A(2)E045 T495X477(1)006A(2)E050 T495X477(1)006A(2)E065 T495E477(1)006A(2)E040 T495E477(1)006A(2)E055 T495E477(1)006A(2)E100 T495E108(1)006A(2)E050 Amps +20C Max/5 Min 9.5 9.5 9.5 9.5 9.5 9.5 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 63.0 % @ +20C 120 Hz Max 8.0 8.0 6.0 6.0 6.0 6.0 10.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 12.0 12.0 12.0 10.0 10.0 10.0 10.0 12.0 10.0 10.0 15.0 m @ 20C 100 kHz Max 40 70 50 125 100 125 25 45 100 100 70 100 150 100 40 50 70 100 65 45 100 60 100 45 100 125 30 45 50 65 40 55 100 50 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1768 1591 707 1336 1202 534 1732 1559 693 1095 986 438 1285 1157 514 1149 1034 460 2098 1888 839 1826 1643 730 1225 1103 490 1225 1103 490 1535 1382 614 1285 1157 514 913 822 365 1285 1157 514 1936 1742 774 1732 1559 693 1464 1318 586 1225 1103 490 1593 1434 637 1915 1724 766 1285 1157 514 1826 1643 730 1414 1273 566 1826 1643 730 1225 1103 490 1095 986 438 2345 2111 938 1915 1724 766 1817 1635 727 1593 1434 637 2236 2012 894 1907 1716 763 1414 1273 566 2000 1800 800 Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 T495A225(1)010A(2)E1K8 T495A475(1)010A(2)E1K2 T495A475(1)010A(2)E1K3 T495A475(1)010A(2)E1K8 T495B475(1)010A(2)E1K3 T495A685(1)010A(2)E1K8 T495B685(1)010A(2)E900 T495A106(1)010A(2)E1K8 T495A106(1)010A(2) E2K0 T495B106(1)010AT E1K2 T495B106(1)010A(2)E750 T495B106(1)010AT E600 T495C106(1)010AT E400 T495T106(1)010AT E1K5 T495A156(1)010AT E1K0 (See below for part options) 0.5 0.5 0.5 0.5 0.5 0.7 0.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.5 Amps +20C Max/5 Min 6.0 6.0 6.0 6.0 15.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max 1800 1200 1300 1800 1300 1800 900 1800 2000 1200 750 600 400 1500 1000 m @ 20C 100 kHz Max 204 184 82 250 225 100 240 216 96 204 184 82 256 230 102 204 184 82 307 276 123 204 184 82 194 175 78 266 239 106 337 303 135 376 338 150 524 472 210 216 194 86 110 274 247 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2009_T495 * 9/19/2012 6 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size VDC F KEMET/EIA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 22 22 22 22 22 22 22 22 22 22 33 33 33 47 47 47 47 47 68 68 68 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 150 A/3216-18 B/3528-21 B/3528-21 T/3528-12 B/3528-21 C/6032-28 C/6032-28 C/6032-28 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 B/3528-21 V/7343-20 V/7343-20 B/3528-21 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 B/3528-21 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 V/7343-20 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (See below for part options) T495A156(1)010AT E1K8 T495B156(1)010AT E600 T495B156(1)010AT E900 T495T156(1)010AT E1K2 T495B156(1)010A(2)E500 T495C156(1)010A(2)E375 T495C156(1)010A(2)E400 T495C156(1)010A(2)E475 T495A226(1)010AT E1K2 T495A226(1)010AT E1K5 T495B226(1)010AT E400 T495B226(1)010AT E500 T495B226(1)010AT E700 T495B226(1)010AT E800 T495C226(1)010A(2)E200 T495C226(1)010A(2)E245 T495C226(1)010A(2)E290 T495C226(1)010A(2)E345 T495B336(1)010A(2)E450 T495V336(1)010A(2)E100 T495V336(1)010A(2)E150 T495B476(1)010A(2)E500 T495D476(1)010A(2)E080 T495D476(1)010A(2)E090 T495D476(1)010A(2)E200 T495D476(1)010A(2)4095 T495B686(1)010A(2)E600 T495B686(1)010A(2)E750 T495B686(M)010A(2)E900 T495C686(1)010A(2)E080 T495C686(1)010A(2)E225 T495V686(1)010A(2)E070 T495V686(1)010A(2)E100 T495V686(1)010A(2)E140 T495D686(1)010A(2)E070 T495D686(1)010A(2)E090 T495D686(1)010A(2)E150 T495X686(1)010A(2)E150 T495X686(1)010A(2)4095 T495B107(M)010A(2)E500 T495V107(1)010A(2)E100 T495V107(1)010A(2)E150 T495D107(1)010A(2)E050 T495D107(1)010A(2)E065 T495D107(1)010A(2)E080 T495D107(1)010A(2)E100 T495D107(1)010A(2)4095 T495X107(1)010A(2)E100 T495X107(1)010A(2)4095 T495V157(1)010A(2)E100 (See below for part options) Amps +20C Max/5 Min 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 Amps +20C Max/5 Min % @ +20C 120 Hz Max 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 6.0 4.0 4.0 10.0 10.0 10.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 30.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 6.0 6.0 8.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 1800 600 900 1200 500 375 400 475 1200 1500 400 500 700 800 200 245 290 345 450 100 150 500 80 90 200 200 600 750 900 80 225 70 100 140 70 90 150 150 150 500 100 150 50 65 80 100 100 100 100 100 m @ 20C 100 kHz Max (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 204 184 82 376 338 150 307 276 123 242 218 97 412 371 165 542 488 217 524 472 210 481 433 192 250 225 100 224 202 90 461 415 184 412 371 165 348 313 139 326 293 130 742 668 297 670 603 268 616 554 246 565 509 226 435 392 174 1118 1006 447 913 822 365 412 371 165 1369 1232 548 1291 1162 516 866 779 346 866 779 346 376 338 150 337 303 135 307 276 123 1173 1056 469 699 629 280 1336 1202 534 1118 1006 447 945 851 378 1464 1318 586 1291 1162 516 1000 900 400 1049 944 420 1049 944 420 412 371 165 1118 1006 447 913 822 365 1732 1559 693 1519 1367 608 1369 1232 548 1225 1103 490 1225 1103 490 1285 1157 514 514 1285 1157 1118 1006 447 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2009_T495 * 9/19/2012 7 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size VDC F KEMET/EIA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7260-38 E/7260-38 E/7260-38 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7260-38 E/7260-38 E/7260-38 16 16 16 16 16 16 16 16 16 16 3.3 4.7 4.7 6.8 10 10 15 15 33 33 A/3216-18 A/3216-18 B/3528-21 C/6032-28 B/3528-21 T/3528-12 A/3216-18 B/3528-21 C/6032-28 C/6032-28 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (See below for part options) T495V157(M)010A(2)E150 T495D157(1)010A(2)E050 T495D157(1)010A(2)E060 T495D157(1)010A(2)E080 T495D157(1)010A(2)E100 T495D157(1)010A(2)4095 T495X157(1)010A(2)E070 T495X157(1)010A(2)E080 T495X157(1)010A(2)E085 T495X157(1)010A(2)E100 T495X157(1)010A(2)4095 T495D227(1)010A(2)E045 T495D227(1)010A(2)E075 T495D227(1)010A(2)E100 T495D227(1)010A(2)E125 T495X227(1)010A(2)E045 T495X227(1)010A(2)E050 T495X227(1)010A(2)E060 T495X227(1)010A(2)E070 T495X227(1)010A(2)E100 T495X227(1)010A(2)4095 T495D337(1)010A(2)E100 T495D337(1)010A(2)E125 T495D337(1)010A(2)E150 T495X337(1)010A(2)E035 T495X337(1)010A(2)E050 T495X337(1)010A(2)E060 T495X337(1)010A(2)E100 T495E337(1)010A(2)E040 T495E337(1)010A(2)E060 T495E337(1)010A(2)E100 T495X477(1)010A(2)E045 T495X477(1)010A(2)E050 T495X477(M)010A(2)E060 T495X477(M)010A(2)E100 T495X477(M)010A(2)E200 T495E477(1)010A(2)E040 T495E477(1)010A(2)E060 T495E477(1)010A(2)E100 Amps +20C Max/5 Min 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 47.0 47.0 47.0 47.0 47.0 47.0 47.0 47.0 % @ +20C 120 Hz Max 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 m @ 20C 100 kHz Max 150 50 60 80 100 100 70 80 85 100 100 45 75 100 125 45 50 60 70 100 100 100 125 150 35 50 60 100 40 60 100 45 50 60 100 200 40 60 100 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 913 822 365 1732 1559 693 1581 1423 632 1369 1232 548 1225 1103 490 1225 1103 490 1535 1382 614 1436 1292 574 1393 1254 557 1285 1157 514 1285 1157 514 1826 1643 730 1414 1273 566 1225 1103 490 1095 986 438 1915 1724 766 1817 1635 727 1658 1492 663 1535 1382 614 1285 1157 514 1285 1157 514 1225 1103 490 1095 986 438 1000 900 400 2171 1954 868 1817 1635 727 1658 1492 663 1285 1157 514 2236 2012 894 1826 1643 730 1414 1273 566 1915 1724 766 1817 1635 727 1658 1492 663 1285 1157 514 908 817 363 2236 2012 894 1826 1643 730 1414 1273 566 Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 T495A335(1)016A(2)E3K0 T495A475(1)016A(2)E2K0 T495B475(1)016A(2)E700 T495C685(1)016A(2)E750 T495B106(1)016A(2)E800 T495T106(M)016A(2)E4K0 T495A156(1)016A(2)E2K5 T495B156(1)016A(2)E800 T495C336(1)016A(2)E200 T495C336(1)016A(2)E225 (See below for part options) 0.5 0.8 0.8 1.1 1.6 1.6 2.4 2.4 5.3 5.3 Amps +20C Max/5 Min 6.0 6.0 6.0 6.0 6.0 8.0 8.0 6.0 6.0 6.0 % @ +20C 120 Hz Max 3000 2000 700 750 800 4000 2500 800 200 225 m @ 20C 100 kHz Max 158 142 63 194 175 78 348 313 139 383 345 153 326 293 130 132 119 53 173 156 69 326 293 130 742 668 297 280 699 629 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2009_T495 * 9/19/2012 8 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size VDC F KEMET/EIA 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 33 33 33 33 33 47 47 47 47 47 68 68 68 68 68 100 100 100 100 100 150 150 150 150 150 150 150 220 220 220 220 220 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 E/7260-38 E/7260-38 E/7260-38 E/7260-38 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 1 10 10 10 10 10 10 15 15 15 22 22 22 33 33 33 47 A/3216-18 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (See below for part options) T495C336(1)016A(2)E275 T495D336(1)016A(2)E150 T495D336(1)016A(2)E175 T495D336(1)016A(2)E225 T495D336(1)016A(2)4095 T495C476(1)016A(2)E350 T495D476(1)016A(2)E080 T495D476(1)016A(2)E100 T495D476(1)016A(2)E150 T495D476(1)016A(2)4095 T495V686(1)016A(2)E180 T495V686(1)016A(2)E300 T495D686(1)016A(2)E070 T495D686(1)016A(2)E100 T495D686(1)016A(2)E150 T495D107(1)016A(2)E100 T495D107(1)016A(2)E125 T495X107(1)016A(2)E080 T495X107(1)016A(2)E100 T495X107(1)016A(2)4095 T495D157(M)016A(2)E060 T495D157(M)016A(2)E085 T495D157(M)016A(2)E100 T495D157(1)016A(2)E125 T495D157(1)016A(2)E150 T495X157(1)016A(2)E075 T495X157(1)016A(2)E100 T495X227(1)016A(2)E100 T495E227(1)016A(2)E050 T495E227(1)016A(2)E075 T495E227(1)016A(2)E100 T495E227(1)016A(2)E150 Amps +20C Max/5 Min 5.3 5.3 5.3 5.3 5.3 7.5 7.5 7.5 7.5 7.5 10.9 10.9 10.9 10.9 10.9 16.0 16.0 16.0 16.0 16.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 35.2 35.2 35.2 35.2 35.2 % @ +20C 120 Hz Max 6.0 6.0 6.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 12.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 12.0 8.0 7.2 7.2 m @ 20C 100 kHz Max 275 150 175 225 250 350 80 100 150 200 180 300 70 100 150 100 125 80 100 125 60 85 100 125 150 75 100 100 50 75 100 150 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 632 569 253 1000 900 400 926 833 370 816 734 326 775 698 310 561 505 224 1369 1232 548 1225 1103 490 1000 900 400 866 779 346 833 750 333 645 581 258 1464 1318 586 1225 1103 490 1000 900 400 1225 1103 490 1095 986 438 1436 1292 574 1285 1157 514 1149 1034 460 1581 1423 632 1328 1195 531 1225 1103 490 1095 986 438 1000 900 400 1483 1335 593 1285 1157 514 1285 1157 514 2000 1800 800 1633 1470 653 1414 1273 566 1155 1040 462 Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 T495A105(1)020A(2)E3K0 T495B106(1)020A(2)E1K0 T495B106(1)020A(2)E800 T495C106(1)020A(2)E300 T495C106(1)020A(2)E350 T495C106(1)020A(2)E400 T495C106(1)020A(2)E475 T495C156(1)020A(2)E375 T495D156(1)020A(2)E275 T495D156(1)020A(2)4095 T495D226(1)020A(2)E180 T495D226(1)020A(2)E225 T495D226(1)020A(2)4095 T495D336(1)020A(2)E100 T495D336(1)020A(2)E150 T495D336(1)020A(2)E200 T495D476(1)020A(2)E075 (See below for part options) 0.5 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0 3.0 4.4 4.4 4.4 6.6 6.6 6.6 9.4 Amps +20C Max/5 Min 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max 3000 1000 800 300 350 400 475 375 275 275 180 225 275 100 150 200 75 m @ 20C 100 kHz Max 158 142 63 292 263 117 326 293 130 606 545 242 561 505 224 524 472 210 481 433 192 542 488 217 739 665 296 739 665 296 913 822 365 816 734 326 739 665 296 1225 1103 490 1000 900 400 866 779 346 566 1414 1273 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2009_T495 * 9/19/2012 9 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size VDC F KEMET/EIA 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 47 47 47 47 47 47 47 68 68 68 68 68 100 100 100 100 100 100 150 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7260-38 E/7260-38 E/7260-38 E/7260-38 E/7260-38 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 0.47 1 1 1 2.2 3.3 4.7 4.7 6.8 6.8 6.8 6.8 10 10 10 15 15 15 15 15 22 22 22 22 22 22 33 33 33 33 A/3216-18 A/3216-18 A/3216-18 A/3216-18 C/6032-28 C/6032-28 C/6032-28 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 C/6032-28 C/6032-28 C/6032-28 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (See below for part options) T495D476(1)020A(2)E100 T495D476(1)020A(2)E175 T495X476(1)020A(2)E065 T495X476(1)020A(2)E100 T495X476(1)020A(2)E125 T495X476(1)020A(2)E150 T495X476(1)020A(2)4095 T495D686(1)020A(2)E070 T495D686(1)020A(2)E150 T495X686(1)020A(2)E120 T495X686(1)020A(2)E150 T495X686(1)020A(2)4095 T495X107(1)020A(2)E100 T495X107(1)020A(2)E150 T495E107(1)020A(2)E060 T495E107(1)020A(2)E085 T495E107(1)020A(2)E100 T495E107(1)020A(2)E200 T495E157(1)020A(2)E080 Amps +20C Max/5 Min 9.4 9.4 9.4 9.4 9.4 9.4 9.4 13.6 13.6 13.6 13.6 13.6 20.0 20.0 20.0 20.0 20.0 20.0 30.0 % @ +20C 120 Hz Max 6.0 6.0 8.0 6.0 6.0 4.0 4.0 8.0 8.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 m @ 20C 100 kHz Max 100 175 65 100 125 150 150 70 150 120 150 150 100 150 60 85 100 200 80 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1225 1103 490 926 833 370 1593 1434 637 1285 1157 514 1149 1034 460 1049 944 420 1049 944 420 1464 1318 586 1000 900 400 1173 1056 469 1049 944 420 1049 944 420 1285 1157 514 1049 944 420 1826 1643 730 1534 1381 614 1414 1273 566 1000 900 400 1581 1423 632 Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 T495A474(1)025A(2)E4K5 T495A105(1)025A(2)E2K5 T495A105(1)025A(2)E3K0 T495A105(1)025A(2)E5K0 T495C225(1)025A(2)E1K3 T495C335(1)025A(2)E750 T495C475(1)025A(2)E575 T495B475(1)025A(2)E1K0 T495B685(1)025A(2)E1K5 T495C685(1)025A(2)E400 T495C685(1)025A(2)E490 T495C685(1)025A(2)E500 T495C106(1)025A(2)E275 T495C106(1)025A(2)E300 T495C106(1)025A(2)E450 T495D156(1)025A(2)E100 T495D156(1)025A(2)E275 T495D156(1)025A(2)4095 T495X156(1)025A(2)E200 T495X156(1)025A(2)4095 T495C226(1)025A(2)E275 T495C226(1)025A(2)E300 T495C226(1)025A(2)E900 T495D226(1)025A(2)E200 T495X226(1)025A(2)E225 T495X226(1)025A(2)4095 T495D336(1)025A(2)E090 T495D336(1)025A(2)E100 T495D336(1)025A(2)E225 T495D336(1)025A(2)E300 (See below for part options) 0.5 0.5 0.5 0.5 0.6 0.8 1.2 1.2 1.7 1.7 1.7 1.7 2.5 2.5 2.5 3.8 3.8 3.8 3.8 3.8 5.5 5.5 5.5 5.5 5.5 5.5 8.3 8.3 8.3 8.3 Amps +20C Max/5 Min 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 6.0 8.0 6.0 6.0 4.0 4.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max 4500 2500 3000 5000 1300 750 575 1000 1500 400 490 500 275 300 450 100 275 275 200 200 275 300 900 200 225 225 90 100 225 300 m @ 20C 100 kHz Max 129 116 52 173 156 69 158 142 63 4 4 2 291 262 116 383 345 153 437 393 175 292 263 117 238 214 95 524 472 210 474 427 190 469 422 188 632 569 253 606 545 242 494 445 198 1225 1103 490 739 665 296 739 665 296 908 817 363 908 817 363 632 569 253 606 545 242 350 315 140 866 779 346 856 770 342 856 770 342 1291 1162 516 1225 1103 490 816 734 326 283 707 636 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2009_T495 * 9/19/2012 10 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size VDC F KEMET/EIA 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 33 33 33 33 47 47 47 47 47 47 68 68 68 68 68 100 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 E/7260-38 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 0.47 0.47 1 1 1 2.2 2.2 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 10 10 10 10 10 10 10 10 15 15 15 15 15 B/3528-21 B/3528-21 A/3216-18 B/3528-21 B/3528-21 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (See below for part options) T495X336(1)025A(2)E100 T495X336(1)025A(2)E175 T495X336(1)025A(2)E200 T495X336(1)025A(2)4095 T495X476(M)025A(2)E080 T495X476(M)025A(2)E150 T495X476(M)025A(2)E185 T495X476(M)025A(2)E200 T495D476(M)025A(2)E120 T495D476(1)025A(2)E250 T495D686(1)025A(2)E150 T495D686(1)025A(2)E200 T495X686(1)025A(2)E125 T495X686(1)025A(2)E150 T495X686(1)025A(2)E200 T495E107(1)025A(2)E100 Amps +20C Max/5 Min 8.3 8.3 8.3 8.3 11.8 11.8 11.8 11.8 11.8 11.8 17.0 17.0 17.0 17.0 17.0 25.0 % @ +20C 120 Hz Max 4.0 4.0 4.0 4.0 8.0 6.0 8.0 6.0 10.0 10.0 10.0 10.0 8.0 8.0 8.0 8.0 m @ 20C 100 kHz Max 100 175 200 175 80 150 185 200 120 250 150 200 125 150 200 100 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1285 1157 514 971 874 388 908 817 363 971 874 388 1436 1292 574 1049 944 420 944 850 378 908 817 363 1118 1006 447 775 698 310 1000 900 400 866 779 346 1149 1034 460 1049 944 420 908 817 363 1414 1273 566 Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 T495B474(1)035A(2)E1K5 T495B474(1)035A(2)E2K2 T495A105(1)035A(2)E3K0 T495B105(1)035A(2)E1K5 T495B105(1)035A(2)E1K7 T495B225(1)035A(2)E1K5 T495C225(1)035A(2)E750 T495B335(1)035A(2)E900 T495C335(1)035A(2)E525 T495C335(1)035A(2)E550 T495C335(1)035A(2)E600 T495B475(1)035A(2)E1K0 T495C475(1)035A(2)E450 T495C475(1)035A(2)E500 T495C475(1)035A(2)E600 T495C475(1)035A(2)4095 T495D685(1)035A(2)E150 T495D685(1)035A(2)E400 T495X685(1)035A(2)E300 T495X685(1)035A(2)4095 T495D106(1)035A(2)E125 T495D106(1)035A(2)E250 T495D106(1)035A(2)E300 T495D106(1)035A(2)4095 T495X106(1)035A(2)E175 T495X106(1)035A(2)E200 T495X106(1)035A(2)E250 T495X106(1)035A(2)4095 T495D156(1)035A(2)E225 T495D156(1)035A(2)E300 T495X156(1)035A(2)E200 T495X156(1)035A(2)E225 T495X156(1)035A(2)4095 (See below for part options) 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 5.3 5.3 5.3 5.3 5.3 Amps +20C Max/5 Min 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 6.0 6.0 6.0 4.0 6.0 6.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max 1500 2200 3000 1500 1700 1500 750 900 525 550 600 1000 450 500 600 600 150 400 300 300 125 250 300 300 175 200 250 250 225 300 200 225 225 m @ 20C 100 kHz Max 238 214 95 197 177 79 158 142 63 238 214 95 224 202 90 238 214 95 383 345 153 307 276 123 458 412 183 447 402 179 428 385 171 292 263 117 494 445 198 469 422 188 428 385 171 428 385 171 1000 900 400 612 551 245 742 668 297 742 668 297 1095 986 438 775 698 310 707 636 283 707 636 283 971 874 388 908 817 363 812 731 325 812 731 325 816 734 326 707 636 283 908 817 363 856 770 342 342 856 770 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2009_T495 * 9/19/2012 11 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size VDC F KEMET/EIA 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 22 22 22 22 22 22 22 22 33 33 33 33 33 33 47 47 47 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 E/7260-38 X/7343-43 X/7343-43 X/7343-43 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 1 2.2 3.3 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 10 10 10 15 15 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (See below for part options) T495D226(1)035A(2)E125 T495D226(1)035A(2)E200 T495D226(1)035A(2)E250 T495D226(1)035A(2)E300 T495X226(1)035A(2)E125 T495X226(1)035A(2)E200 T495X226(1)035A(2)E275 T495X226(1)035A(2)4095 T495D336(1)035A(2)E200 T495D336(1)035A(2)E300 T495X336(1)035A(2)E100 T495X336(1)035A(2)E175 T495X336(1)035A(2)E250 T495E336(1)035A(2)E200 T495X476(1)035A(2)E185 T495X476(1)035A(2)E200 T495X476(1)035A(2)E300 Amps +20C Max/5 Min 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 11.6 11.6 11.6 11.6 11.6 11.6 16.5 16.5 16.5 % @ +20C 120 Hz Max 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 m @ 20C 100 kHz Max 125 200 250 300 125 200 275 300 200 300 100 175 250 200 185 200 300 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1095 986 438 866 779 346 775 698 310 707 636 283 1149 1034 460 908 817 363 775 698 310 742 668 297 866 779 346 707 636 283 1285 1157 514 971 874 388 812 731 325 1000 900 400 944 850 378 908 817 363 742 668 297 Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 T495C105(1)050A(2)E1K3 T495D225(1)050A(2)E600 T495D335(1)050A(2)E700 T495D475(1)050A(2)E275 T495D475(1)050A(2)E300 T495X475(1)050A(2)E300 T495X475(1)050A(2)4095 T495D685(1)050A(2)E190 T495D685(1)050A(2)E200 T495D685(1)050A(2)E275 T495D685(1)050A(2)E300 T495X106(1)050A(2)E250 T495X106(1)050A(2)E260 T495X106(1)050A(2)E300 T495X156(1)050A(2)E200 T495X156(1)050A(2)E300 (See below for part options) 0.5 1.1 1.7 2.4 2.4 2.4 2.4 3.4 3.4 3.4 3.4 5.0 5.0 5.0 7.5 7.5 Amps +20C Max/5 Min 4.0 6.0 6.0 6.0 6.0 4.0 4.0 6.0 6.0 6.0 8.0 8.0 6.0 6.0 8.0 8.0 % @ +20C 120 Hz Max 1300 600 700 275 300 300 300 190 200 275 300 250 260 300 200 300 m @ 20C 100 kHz Max 291 262 116 500 450 200 463 417 185 739 665 296 707 636 283 742 668 297 742 668 297 889 800 356 866 779 346 739 665 296 707 636 283 812 731 325 797 717 319 742 668 297 908 817 363 742 668 297 (mArms) (mArms) (mArms) 100 kHz 25C 100 kHz +85C 100 kHz +125C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2009_T495 * 9/19/2012 12 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Recommended Voltage Derating Guidelines 1.2 -55C to 125C 50% of VR VR 100% of VR VR 1 0.8 % Working Voltage % Change in Working DC Voltage with Temperature Recommended Maximum Application Voltage % Change in Working DC Voltage with Temperature 67% 0.6 0.4 Recommended Maximum Application Voltage (As % of Rated Voltage) 33% 0.2 0 -55 25 85 125 Temperature (C) Ripple Current/Ripple Voltage KEMET Series and Case Code EIA Case Code Maximum Power Dissipation (P max) mWatts @ 25C w/+20C Rise A B C D X E T428P R S T U V T510X T510E 3216-18 3528-21 6032-28 7343-31 7343-43 7260-38 7260-38 2012-12 3216-12 3528-12 6032-15 7343-20 7343-43 7260-38 75 85 110 150 165 200 325 25 60 70 90 125 270 285 Temperature Compensation Multipliers for Maximum Power Dissipation 25C 1.00 85C 0.90 125C 0.40 T= Environmental Temperature Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/R E(max) = P max*R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation(watts) R = ESR at specified frequency (ohms) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 13 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25C 85C 125C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 - Land Dimensions/Courtyard KEMET Metric Size Code Case EIA X Y C V1 V2 X Y C V1 V2 X Y C V1 V2 A 3216-18 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00 Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) B 3528-19 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20 C 6032-28 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60 D 7343-31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 E 7260-38 4.25 2.65 3.20 10.10 7.20 4.15 2.25 3.30 9.40 6.70 4.05 1.85 3.00 8.10 6.40 T 3528-12 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20 V 7343-20 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 X 7343-43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 (IPC-7351). Height of these chips may create problems in wave soldering. Land pattern geometry is too small for silkscreen outline. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 14 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Soldering Process Please note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100C 150C Temperature Maximum (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60 - 120 seconds 60 - 120 seconds 3C/seconds maximum Ramp-up Rate (TL to TP) 3C/seconds maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 220C* 235C** 60 - 150 seconds 250C* 260C** Peak Temperature (TP) Time within 5C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) 20 seconds maximum 30 seconds maximum 6C/seconds maximum 6C/seconds maximum Time 25C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z TP TL Temperature KEMET's families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp Up Rate = 3C/seconds Maximum Ramp Down Rate = 6C/seconds tL Tsmax Tsmin 25 tS 25C to Peak Time Construction MNO2 /Ta2O5/Ta Silver Adhesive Silver Paint Washer Leadframe (-Cathode) Leadframe (+Anode) Carbon Tantalum Wire Weld (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 15 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Capacitor Marking Rated Voltage 156 25 K 030 KEMET Industrial Grade MnO2 Picofarad Code KEMET ID Rated Voltage PWC* PWC* Polarity Indicator (+) KEMET ID 156 25V R+ Polarity Indicator (+) K KEMET Surge Robust MnO2 C, D, X Case Sizes A6 49 Picofarad Code Internal Code * 030 = 30th week of 2010 PWC* Year V = 2008 W = 2008 X = 2009 A = 2010 B = 2011 C = 2012 Month 1 = Jan 2 = Feb 3 = Mar 4 = Apr 5 = May 6 = Jun 7 = Jul 8 = Aug 9 = Spt O = Oct N = Nov D = Dec Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature- reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 16 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Tape & Reel Packaging Information KEMET's molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481-1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. 8 mm (0.315") or 12 mm (0.472") Top Tape Thickness 0.10 mm (0.004") Maximum Thickness 180 mm (7.0") or 330 mm (13.0") Table 3 - Packaging Quantity Case Code KEMET R I S T M U L W Z V A B C D Y X E/T428P H EIA 2012-12 3216-10 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-40 7343-43 7260-38 7360-20 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 12 2,500 3,000 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 1,000 10,000 12,000 10,000 10,000 8,000 5,000 5,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 2,500 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 17 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ODo Po [10 pitches cumulative tolerance on tape 0.2 mm] E1 Ao F Ko W B1 E2 Bo S1 P1 T1 Center Lines of Cavity OD 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 4 User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8 mm 12 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 16 mm D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 P2 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) R Reference Note 2 25.0 (0.984) 30 (1.181) S1 Minimum Note 3 0.600 (0.024) T Maximum T1 Maximum 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8 mm Single (4 mm) 12 mm Single (4 mm) & Double (8 mm) 16 mm Triple (12 mm) B1 Maximum Note 4 4.35 (0.171) 8.2 (0.323) 12.1 (0.476) E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) 3.5 0.05 (0.138 0.002) 5.5 0.05 (0.217 0.002) 5.5 0.05 (0.217 0.002) 4.0 0.10 (0.157 0.004) 8.0 0.10 (0.315 0.004) 8.0 0.10 (0.315 0.004) 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 5). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481-D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3). (e) see Addendum in EIA Standard 481-D for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 18 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8,12 16 - 200 Bo Maximum Rotation ( 20 10 T) Typical Component Centerline Ao Figure 3 - Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum 16 mm Tape s Tape Maximum Width (mm) Rotation ( 8,12 20 16 - 56 10 72 - 200 5 S) Figure 4 - Bending Radius Embossed Carrier Punched Carrier 1.0 mm maximum 1.0 mm maximum R Bending Radius (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com R T2009_T495 * 9/19/2012 19 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes Access Hole at Slot Location (O 40 mm minimum) flange distortion at outer edge) W2 (Measured at hub) D A N (See Note) C (Arbor hole diameter) B (see Note) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions -- Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) Shall accommodate tape width without interference 8 mm 12 mm 16 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 20 Low ESR MnO2 Tantalum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only END Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm Minimum Components 100 mm Minimum Leader 400 mm Minimum Top Cover Tape Figure 7 - Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm Maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 9/19/2012 21