Amphenol GT Ser ies
Reverse Bayonet Coupling Connectors
Amphenol
12-024-8
®
Ruggedized Connector Series
for Rail/Mass Transit and other
Harsh Environments
AMPHENOL CORPORA TION
Amphenol Industrial Operations
40-60 Delaware A venue
Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011
www.amphenol-industrial.com
Table of Contents Page N o.
Amphenol® GT Series Reversed Bayonet Coupling Connectors
General Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1
GT Series in sert availability char ts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-4
GT Series in sert alter n ate positioning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5
GT Series contact arrangements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-28
GT Conne c tor Classes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29
GT00A wall mount recep tacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 0
GT00AF/00F wall mount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 31
GT00CF/00CFZ wall mount receptacle for front panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 32
GT00G wall m ount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 33
GT00LCF/00LCFZ wall mount receptacle for front panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 34
GT00R wall mount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 5
GT00RV wall mount rece p tacle for front panel mo u nting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 36
GT01A inlin e receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 37
GT01AF/0 1 F inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 38
GT01G inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3 9
GT01LCF/01LCFZ inline receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 40
GT01R inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -41
GT01RV inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 42
GT02R/02RFS box mount recepta cle for front panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 43
GT020R/020RFSM box mount receptacle for front panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 44
GT030 square flange receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 45
GT030A sq u are flange recepta c le for rear panel moun ting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 46
GT030AF/030F square flange rece ptacle fo r rear panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 47
GT030G square fla nge receptacle fo r rear panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 48
GT030LCF/030LCFZ square flange receptacle for rear panel m ounting - - - - - - - - - - - - - - - - - - - - - - - - - 49
GT030R square fla nge receptacle fo r rear panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 0
GT030RV square flange receptacle for rear panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 1
GT06A straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 2
GT06AF/0 6 F straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 53
GT06CF straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 54
GT06CFGG straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 55
GT06G straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 56
GT06G2 straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 57
GT06LC straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 58
GT06LCF/06LCFZ straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 59
GT06LT straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 60
GT06PFC straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 61
GT06PG straight p lug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 62
GT06PP/064PP panel plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 63
GT06R straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 64
GT06RV straig ht plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 65
GT06SB straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 66
GT06SBT straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 67
GT065SL straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 68
GT07R jam nut receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 69
GT070 jam nut re ceptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 70
GT08A 90 ° angle plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 71
GT08AF/0 8 F 90° angle plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -72
GT08CFGG 9 0 ° angle plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 73
GT08LT 90 ° angle plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 74
GT08PFC 90° angle plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 75
GT08R 90° angle plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 76
GT05 dummy receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 77
GTTB thru-bulkhea d receptacles- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 78
Sealing gaskets - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 79
Receptacle protection caps - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -80
Plug p ro tection caps - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 81
MS3057-A cable cla mp - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 82
MS3420 bushing- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 3
MS3057-C style (10-350349) cable clamp- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 4
Rear mounting data - receptacles, sealing plugs, sealing ranges- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 85
Crimp and solder contact information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 86, 87
HOW TO ORDER, connector intermateability - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 88
GT Amphe-Power Connectors with RADSOK® Technology,
Amphe-Power Amphe-GTR, Power GT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 89
Special Application GT Connectors:
GTC-M Series with m etal clips, GT-PC Connectors for high voltage power applications,
GT Connectors for the HMI Lighting industry - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 90
Additio nal Amphenol Industria l Products for the Rail Industry - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 91, 92
Sales offic e listing
Amphenol Aerospace operates quality systems that are certified to ISO9001: 2000 by third par ty registrars.
1
Designed originally for use by the military, the heavy duty
GT connector has become widely used in commercial,
geophysical, aerospace, ground suppor t and shipboard
applications. It is the preferred connector for mass transit.
Variety of Shel l Styles are Available
Wall Mount Receptacle
Inline Receptacle
Str aig ht Plug
Plug With Rubber Covered
Coupling Nut
Jam Nut Receptacle
Amphenol® GT reverse bay onet coupling connectors
with MIL-C-5015 insert patterns features:
Quick positive coupling
Audible, tactile and visual indication of full coupling
Waterproof – IP67 rated
No lockwiring required
High shock and vibration capabilities
Inserts available in N eoprene and Viton* materials
Low smoke/flame retardant inserts also available
Operating temperature range:
With Neoprene inserts: –55°C to +125°C
With Viton** inserts: –50°C to +200°C
With low smoke/flame retardant inserts: –55°C to +125°C
Available in both crimp and solder terminations
Contacts available in gold and silver plating
Numerous military and commercial finishes available
Zinc alloy plating (cadmium free) available
Rugged construction; aluminum or stainless steel
components
Available with resilient cover coupling for added damage
protection and increased gripping surface
Intermateable with existing VG95234 connectors
2000 couplings minimum
UL recognized
Up to 50% more ampacity with the use of RADSOK ®
technology (see page 89)
Amphenol’s special offerings of GT Series connectors (see
end of catalog) include: GT Amphe-Power® Connectors with
RADSOK® technology, the GTC-M Series with metal clip
inserts and GT-PC Series for high voltage power applica-
tions. There is also infor m ation on other Amphenol Industrial
Products for the Rail Industry at the end of this catalog.
F or further inf ormati on on y our individual application r equire-
ments, contact:
Amphenol Cor poration
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, New York 13838-1395
Phone: 607-563-5011 Fax: 607-563-5351
www.amphenol-industrial.com
NOTE:
The connector products in this brochure were formerly known as
Bendix® prod ucts. These produc ts are now manufactured and sold
under the Amphenol® brand name. Th e name “Amphenol” will
repl ace th e name “Ben di x” on pr oducts and li t eratur e i n the fut u re. **For availability of Viton inserts consult Amphenol, Sidney, NY.
Viton is a registered trademark of Dupont/Dow Corning.
Amphenol GT Connectors
with reverse bayone t coupling
the pr eferre d conn ecto r for mass tr ansi t
®
2
GT Se ries
insert availability
Insert
Arrange-
ment Service
Rating
Total
Con-
tacts
Contact Size
0481216 Coax
04812
10SL-3 A 3 3
10SL-4† A 2 2
14S-2 Inst. 4 4
14S-4 D 1 1
14S-5 Inst. 5 5
14S-6 Inst. 6 6
14S-7 A 3 3
14S-9 A 2 2
14S-10 Inst. 4 4
14S-12 A 3 3
14S-A7 A 7 7
16S-1 A 7 7
16S-3 B 1 1
16S-4 D 2 2
16S-5 A 3 3
16S-6 A 3 3
16S-8 A 5 5
16-2 E 1 1
16-7 A 3 1 2
16-9 A 4 2 2
16-10 A 3 3
16-11 A 2 2
16-12 A 1 1
16-13 A 2 2
16-59 A 4 4
18-1 A/Inst. 10 10
18-3 D 2 2
18-4 D 4 4
18-5 D 3 2 1
18-6 D 1 1
18-7 B 1 1
18-8 A 8 1 7
18-9 Inst. 7 2 5
18-10 A 4 4
18-11 A 5 5
18-12 A 6 6
18-13 A 4 1 3
18-14 A 2 1 1
18-15 A 4 4
18-16 C 1 1
18-17 Inst. 7 2 5
18-19 A 10 10
18-20 A 5 5
18-22 D 3 3
18-24 A/Inst. 10 10
18-29 A 5 5
18-30 A 5 5
18-31 A 5 5 †10SL-4 arrangement available only with pin contacts in receptacle and sock et
contacts in plug
20-2 D 1 1
20-3 D 3 3
20-4 D 4 4
20-6 D 3 3
20-7 D/A 8 8
20-8 Inst. 6 2 4
20-9 D/A 8 1 7
20-11 Inst. 13 13
20-12 A 2 1 1
20-14 A 5 2 3
20-15 A 7 7
20-16 A 9 2 7
20-17 A 6 5 1
20-18 A 9 3 6
20-19 A 3 3
20-20 A 4 1 3
20-21 A 9 1 8
20-22 A 6 3 3
20-23 A 2 2
20-24 A 4 2 2
20-25 Inst. 13 13
20-26 A 19 19
20-27 A 14 14
20-29 A 17 17
20-30 Inst. 13 13
20-33 A 11 11
20-51 A 3 3
20-57 A 7 7*
20-58 A 10 5 5
20-59 A 3 3*
20-66 A 6 5* 1
20-79 A/D 8 1 7
22-1 D 2 2
22-2 D 3 3
22-4 A 4 2 2
22-5 D 6 2 4
22-6 D 3 2 1
22-7 E 1 1
22-8 E 2 2
22-9 E 3 3
22-10 E 4 4
22-11 B 2 2
22-12 D 5 2 3
22-13 D/A 5 4 1
22-14 A 19 19
22-15 E/A 6 5 1
Insert
Arrange-
ment Service
Rating
Total
Con-
tacts
Contact Size
0481216 Coax
04812
*Crimp contacts accommodate wire the same size as the contact as well as wire of
the next smaller, even size. Arrangements identified with an asterisk (*) are excep-
tions. See insert arrangement dra wings on pages 6-28 for application wire size.
**Coaxial cable data can be found on insert arrangement drawings, pages 6-28.
For further information on coaxial contacts and cable see catalog 12-130.
3
GT Se ries
insert availability, cont.
Insert
Arrange
ment Service
Rating
Total
Con-
tacts
Contac t Size
0481216 Coax**
04812
22-16 A 9 3 6
22-17 D/A 9 1 8
22-18 D/A 8 8
22-19 A 14 14
22-20 A 9 9
22-21 A 3 1 2
22-22 A 4 4
22-23 D/A 8 8
22-24 D/A 6 2 4
22-27 D/A 9 1 8
22-28 A 7 7
22-33 D/A 7 7
22-34 D 5 3 2
22-63 A 12 4 8
22-65 D/A 8 8*
22-70 A 13 8 5
22-80 A 3 3*
24-2 D 7 7
24-3 D 7 2 5
24-5 A 16 16
24-6 D/A 8 8
24-7 A 16 2 14
24-9 A 2 2
24-10 A 7 7
24-11 A 9 3 6
24-12 A 5 2 3
24-16 D/A 7 1 3 3
24-17 D 5 2 3
24-19 A 12 12
24-20 D 11 2 9
24-21 D 10 1 9
24-22 D 4 4
24-27 E 7 7
24-28 Inst. 24 24
24-51 A 5 5
24-52 Hi Volt. 1 1
24-53 A 5 5
24-58 A 13 3 3 7
24-59 A 14 7 7
24-60 A 7 7*
24-65 A 15 11 4
24-66 D 7 7
24-67 Inst. 19 19
24-71 A 7 7*
24-75 A 7 7*
24-79 A 5 5
24-80 Inst. 23 23
24-84 A 19 1 18
24-96 Inst. 28 28
24-AJ A 25 25
28-1 D/A 9 3 6
28-2 D 14 2 12
28-3 E 3 3
28-4 E/D 9 2 7
28-5 D 5 2 1 2
28-6 D 3 3
28-7 D 2 2
28-8 E/D/A 12 2 10
28-9 D 12 6 6
28-10 D/A 7 2 2 3
28-11 A 22 4 18
28-12 A 26 26
28-13 A 26 26
28-15 A 35 35
28-16 A 20 20
28-17 B/D/A 15 15
28-18 C/D/A/Inst. 12 12
28-19 B/D/A 10 4 6
28-20 A 14 10 4
28-21 A 37 37
28-22 D 6 3 3
28-51 A 12 12
28-59 A 17 7 10
28-66 A 16 2 14
28-72 Coax 3 3
28-74 A 16 7* 9
28-75 A 16 7* 9
28-79 A 16 7 9
28-82 D 6 2 4
28-84 A 9 9
28-AY A 9 4 5
32-1 E/D 5 2 3
32-2 E 5 3 2
32-3 D 9 1 2 2 4
32-4 A/D 14 2 12
32-5 D 2 2
32-6 A 23 2 3 2 16
32-7 Inst./A 35 7 28
32-8 A 30 6 24
32-9 D 14 2 12
32-10 E/B/D/A 7 2 2 3
32-12 A/D 15 5 10
32-13 D 23 5 18
32-15 D 8 2 6
32-16 A 23 2 3 2 16
Insert
Arrange
ment Service
Rating
Total
Con-
tacts
Contact Size
0481216 Coax**
04812
*Crimp contacts accommodate wire the same size as the contact as well as wire of
the next smaller, even size. Arrangements identified with an asterisk (*) are excep-
tions. See insert arrangement drawings on pages 6-28 for application wire size. **Coaxial cable data can be found on insert arrangement drawings, pages 6-28.
For further inf ormation on coaxial contacts and cable see catalog 12-130.
4
Insert
Arrange-
ment Service
Rating
Total
Con-
tacts
Contact Size
0481216 Coax**
04812
32-17 D 4 4
32-22 A 54 54
32-25 A 25 25
32-31 A 31 31
32-48 Inst. 48 48
32-52 D 8 2 6
32-53 E/Inst. 42 5 37
32-56 A 30 6* 24
32-57 Coax 8 6 2
32-58 Coax 4 4
32-59 A 42 40 2
32-60 A 23 15 8
32-62 Coax 23 2 1 2 16 2
32-64 Inst. 54 54
32-68 A 16 12 4
32-73 A 46 46
32-75 Coax 9 2 7
32-76 A 19 19
32-79 D 5 4 1
32-82 A 16 4 12
32-AF A 55 55
32-AM A 1 1 size 4/0
36-1 D 22 4 18
36-3 D 6 3 3
36-4 D/A 3 3
36-5 A 4 4
36-6 A 6 2 4
36-7 A 47 7 40
36-8 A 47 1 46
36-9 A 31 1 2 14 14
36-10 A 48 48
36-11 A 48 48
36-12 A 48 48
36-13 E/A 17 2 15
36-14 D 16 5 5 6
36-15 D/A 35 35
36-16 A 47 7 40
36-17 A 47 7 40
36-18 A 31 1 2 14 14
36-20 A 34 2 2 30
36-22 D 22 22
36-51 D 4 2 2
36-52 A 52 52
36-54 A 39 8 31
36-55 A 39 8* 31
36-59 A 53 3* 50
36-60 A 47 7* 40
36-64 Coax 4 4
36-65 Coax 4 4
GT Se ries
insert availability, cont.
**Coaxial cable data can be found on insert arrangement drawings, pages 6-28.
For further inf ormation on coaxial contacts and cable see catalog 12-130.
36-71 A 53 3 50
36-73 Coax 7 7
36-74 A 44 43 1
36-75 A 48 48*
36-76 A 47 47
36-77 D 7 7
36-78 A 14 12 2
36-79 A 20 20
36-80 A 20 20*
36-83 Coax 7 7
36-85 A/D 35 35*
36-97 C 1 1 size 4/0
36-99 D 12 3 3 3 3
36-AF A 48 48
40-1 D 30 6 24
40-5 A 5 5
40-9 A 47 1 22 24
40-10 A 29 4 9 16
40-30 A 30 1 29
40-35 D 35 35
40-53 A 60 60
40-56 A 85 85
40-57 E 4 4
40-61 A 59 1 3 55
40-62 A 60 60
40-63 A 61 61*
40-64 Coax 36 3 20 13
40-66 Coax 4 4
40-67 A 11 1 10
40-68 A 21 21
40-70 A 61 61
40-72 A 11 1 10
40-73 A 61 61
40-74 A 6 1 4 1
40-75 E 5 4 1
40-80 A 11 10 1
40-81 A 62 62*
40-82 A 62 62
40-85 A 60 60*
40-86 Coax 4 4
40-87 D 7 7
40-AD A 8 4 4
40-AG A 38 38
40-AP E 2 2 size 4/0
40-AR Inst. 13 3 3 7
40-AS A 40 25 15
40-AT A 43 1 24 18
40-AU A 14 3 10 1
40-AV D 3 3 size 2/0
Insert
Arrange-
ment Service
Rating
Total
Con-
tacts
Contact Size
0481216 Coax**
04812
*Crimp contacts accommodate wire the same size as the contact as well as
wire of the ne xt smaller, e ven size. Arrangements identified with an asterisk (*)
are exceptions. See insert arrangement drawings on pages 6-28 for applica-
tion wire size.
5
GT Se ries
insert alternate positioning
To avoid cross-plugging problems in applications requir-
ing the use of m ore than one co nnect or of the sam e s ize
and arrangement, alternate rotations are available as
indicated in the accompanying charts.
As shown in the diagram below, the front fa ce of the pin
insert is rotated within the shell in a clockwise direction
from the normal shell key. The socket insert would be
rotated counter-clockwise the same number of degrees
in respect to the norm al shell key.
Pos itio n W Position X Position Y Position Z
View looking into front face of pin insert or rear of socket insert.
The following insert arrangements have the same alter-
nate inser t rotations for W, X, Y and Z, which are:
Degrees
WX YZ
80 110 250 280
T16-7 20-16 22-18 24-4 24-28 28-16 32-10
18-5 20-20 22-19 24-5 24-AJ 28-17 32-12
18-9 20-22 22-21 24-6 28-1 28-19 32-13
18-13 22-3 22-24 24-7 28-4 28-20 32-22
18-14 22-6 22-25 24-12 28-8 28-21 32-AF
20-7 22-12 22-29 24-14 28-9 32-1 36-1
20-8 22-14 22-33 24-16 28-10 32-3 36-7
20-9 22-15 22-34 24-17 28-11 32-4 36-8
20-12 22-16 24-1 24-20 28-14 32-6 36-13
20-14 22-17 24-3 24-21 28-15 32-9 40-53
Insert
Arrangement Degrees
WXYZ
10SL-4 63
14S-2 120 240
14S-5 110
14S-7 90 180 270
14S-9 70 145 215 290
16-9 35 110 250 325
16-10 90 180 270
16-11 35 110 250 325
16-13 35 110 250 325
16S-1 80 280
16S-4 35 110 250 325
16S-5 70 145 215 290
16S-6 90 180 270
16S-8 170 265
18-1 70 145 215 290
18-3 35 110 250 325
18-4 35 110 250 325
18-8 70 290
18-10 120 240
18-11 170 265
18-12 80 280
18-15 120 240
18-20 90 180 270
18-22 70 145 215 290
18-29 90 180 270
20-3 70 145 215 290
20-4 45 110 250
20-5 35 110 250 325
20-6 70 145 215 290
20-15 80 280
20-17 90 180 270
20-18 35 110 250 325
20-19 90 180 270
20-21 35 110 250 325
20-23 35 110 250 325
20-24 35 110 250 325
20-27 35 110 250 325
20-29 80 280
20-33 280
22-1 35 110 250 325
22-2 70 145 215 290
22-4 35 110 250 325
22-5 35 110 250 325
22-8 35 110 250 325
22-9 70 145 215 290
22-10 35 110 250 325
22-11 35 110 250 325
22-13 35 110 250 325
22-20 35 110 250 325
22-22 110 250
22-23 35 250
22-27 80 250 280
22-28 80 280
24-2 80 280
24-9 35 110 250 325
24-10 80 280
24-11 35 110 250 325
24-22 45 110 250
24-27 80 280
24-96 65
28-2 35 110 250 325
28-3 70 145 215 290
28-5 35 110 250 325
28-6 70 145 215 290
Insert
Arrangement Degrees
WXYZ
*Additional rotations available; consult Amphenol for
information.
28-7 35 110 250 325
28-12 90 180 270
28-18 70 145 215 290
28-22 70 145 215 290
28-AY 45 110 250
32-2 70 145 215 290
32-5 35 110 250 325
32-7 80 125 235 280
32-8 80 125 235 280
32-15 35 110 250 280
32-17 45 110 250
32-25 60 120
32-64* 80 100 110 250
32-68 30
32-82 30
36-3 70 145 215 290
36-4 70 145 215 290
36-5 120 240
36-6 35 110 250 325
36-9 80 125 235 280
36-10 80 125 235 280
36-14 90 180 270
36-15 60 125 245 305
36-AF 65
40-1 65 130 235 300
40-5 33 270
40-9 65 125 225 310
40-10 65 125 225 310
40-35 70 130 230 290
40-56 72 144 216 288
40-AG 37 74 285 322
Insert
Arrangement Degrees
WXYZ
AB
AB
A
B
A
B
6
AB
C
AB
A
BC
D
A
B
C
D
E
FA
B
C
D
EA
B
C
AB
100˚
A
BC
D
100˚
A
B
C
A
B
CD
E
F
G
AB
A
BC
A
B
CA
B
C
D
E
AB
C
A
B
C
D
A
F
E
D
C
B
G
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 10SL-3 10SL-4 14S-2 14S-4 14S-5
Se rvice Rating A A Inst . D Inst .
Number of Contacts 3 2 4 1 5
Contact Size 16 16 16 16 16
Insert Arran gement 14 S -6 14S-7 1 4S -9 14S-10 14S-12
Se rvice Rating Inst. A A Inst . A
Number of Contacts 6 3 2 4 3
Contact Size 16 16 16 16 16
Insert Arran gement 14S- A7 16S-1 1 6S -3 1 6S -4 16S -5
Service Rating AABDA
Number of Contacts 7 7 1 2 3
Contact Size 16 16 16 16 16
Insert Arran gement 16S-6 16S-8 16-2 16-7 16-9
Servic e Rating A A E A A
Number of Contacts 3 5 1 1 2 2 2
Contact Size 16 16 12 8 16 12 16
CONTACT LEGEND 16 12 8 4 0
Front of
Socket Insert Front of
Socket Insert
100° Rotation
of 14S-2 100° Rotation
of 14S-7
7
A
B
AB
AB
A
BC
D
A
BC
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
A
BC
DA
BC
D
E
A
B
C
D
E
F
A
B
C
D
A
B
A
B
C
D
100˚
A
B
C
D
E
F
G
A
BC
DEF G
H
K
J
AB
C
D
E
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 16-10 16-11 16-12 16-13 16-59
Service Rating AAAAA
Number of Contacts 3 2 1 2* 4
Contact Size 12 12 4 12 12
Insert Arran gement 18-1 18-3 18-4 18-5 18-6 18-7
Servic e Rating B, C, F, G = A; Bal. = Inst. D D D D B
Number of Contacts 10 2 4 2 1 1 1
Contac t Si ze 16 12 16 12 16 4 8
Insert Arran gement 18-8 18-9 18-10 18-11 18-12 18-13
Service Rating A Inst. A A A A
Number of Contacts 1 7 2 5 4 5 6 1 3
Contact Size 12 16 12 16 12 12 16 8 12
Insert Arran gement 18 -14 18-15 18-16 18-17 18-19 18 -20
Service Rating A A C Inst. A A
Number of Contacts 1 1 4** 1 2 5 10 5
Contact Size 4 16 12 12 12 16 16 1 6
CONTACT LEGEND 1 6 1 2 8 4 0
* A = Iron; B = Constantan
**A, C = Iron; B, D = Constantan
100° Rotation
of 18-9
A
B
C
D
E
F
G
H
I
J
B
CA
AB
CD
8
110˚
AB
C
D
E
A
BC
A
BC
A
B
C
DE
F
G
H
A
B
C
D
EF
A
B
C
DE
F
GH
A
BC
D
E
F
GH
J
K
L
M
N
A
B
A
B
C
D
EA
B
CD
EG
F
A
B
C
D
EFG
H
I
A
BC
D
E
F
260˚
AB
C
D
E
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 18-2 2 18 -24 18-29 18-30 18-31 20-2
Servic e Rating D B, C, F, G = A; Bal. = Inst. A A A D
Number of Contacts 3 10 5 5 5 1
Contac t Si ze 16 16 16 16 16 0
Insert Arran gement 20-3 20-4 20 -6 20-7 20-8 20-9
Service Rating D D D A, B, H, G = D; C, D, E, F = A Inst. H = D; Bal. = A
Number of Contacts 3 4 3 8 2 4 1 7
Contac t Si ze 12 12 16 16 8 16 12 16
Insert Arran gement 20 -11 20-12 20-14 20-15 20-16 20-17
Se rvice Rating Inst. A A A A A
Number of Contacts 13 1 1 2 3 7 2 7 5 1
Contact Size 16 4 16 8 12 12 12 16 12 16
CONTACT LEGEND 1 6 1 2 8 4 0
110° Rotation
of 18-20
A
B
C
D
E
A
B
D
C
250˚
A
B
C
D
E
F
G
H
I
J
AB
G
250° Rotation
of 18-1 260° Rotation
of 18-20
9
A
B
C
D
A
B
C
D
E
F
G
H
I
A
B
C
D
E
F
A
B
A
B
C
D
100˚
A
BC
D
E
F
GH
J
K
L
M
N
A
B
C
D
EF
G
H
I
J
K
L
M
N
AB
C
D
E
F
G
H
J
K
L
MN
PT
SR
250˚
A
BC
D
E
F
GH
J
K
L
M
N
A
B
C
D
E
F
K
H
JM
L
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 20 -18 20-19 20-20 20-21 20-22 20-23
Service Rating AA AAAA
Number of Contacts 3 6 3 1 3 1 8 3 3 2
Contac t Si ze 12 16 8 4 12 12 16 8 16 8
Insert Arran gement 20 -24 20-25 20- 26 20- 27 20 -29 20-30
Service Rating A Inst. A A A Inst.
Number of Contacts 2 2 13 19 14 17 13
Contact Size 816161616 16 16
Insert Arran gement 20-33 20 -51 20-57 20-58 20-59 20 -66
Servic e Rating A A A A A A
Number of Contacts 11 3* 7* 5 5 3* 1 5
Contac t Size 16 8 12 for #14 or 16 wire 12 16 8 for #10 o r 12 wire 16 12 for #10 wire
* Solderless CONTACT LEGEND 1 6 1 2 8 4 0
250° Rotation
of 20-11
100° Rotation
of 20-11
A
BC
A
B
C
D
E
F
G
H
I
ABC
D
E
F
G
HSR
JTVP
KLM
UN
A
B
C
A
B
CD
EG
F
A
BC
DE
F
H
J
K
L
A
B
C
A
BC
D
E
F
10
A
BC
A
BC
D
AB
A
B
CD
E
A
B
C
D
E
A
B
C
D
E
F
G
H
J
K
LM
NU
V
R
S
TP
A
B
E
F
C
D
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 20-79 22- 1 22-2 22-4 22-5
Service Rating H=D; Bal. = A D D A D
Number of Contacts 7* 1* 2 3 2 2 2 4
Contac t Si ze 16 12 fo r #16 wi re 8 8 8 1 2 12 16
Insert Arran gement 22-6 22-7 22-8 22-9 22-10
Servic e Rating D E E E E
Number of Contacts 2 1 1 2 3 4
Contac t Si ze 8 16 0 12 12 16
Insert Arran gement 22-11 22 -12 22-13 22-14 22 -15
Service Rating B D E = D; A, B, C, D = A A D = E; A, B, C, E, F = A
Number of Contacts 2 23 41 19 51
Contact Size 1 6 8 16 12 16 16 12 16
* Solderless CONTACT LEGEND 1 6 1 2 8 4 0
A
B
C
D
A
B
CD
E
F
A
B
C
AB
AB
A
B
C
A
B
C
D
E
F
G
H
11
A
B
C
D
E
F
A
B
C
D
E
F
G
H
J
A
B
C
E
F
G
D
A
BC E
FG
DA
BC
DE
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 22-16 22-17 22-18 22-19 22-20
Servic e Rating A A = D; Bal. = A A, B, F, G, H = D; C, D, E = A A A
Number of Contacts 3 6 1 8 8 14 9
Contac t Si ze 12 16 12 16 16 16 16
Insert Arran gement 22-21 22-22 22- 23 22-24 22-27
Servic e Rating A A H = D; B al. = A C, D, E = D; A, B, F = A J = D; B al. = A
Number of Contacts 1 2 4 8 2 4 1 8
Contac t Si ze 0 16 8 12 12 16 8 16
Insert Arran gement 22-28 22-33 22- 34 22-63 22-65
Ser vic e Rating A A, B, C, D = D; E. F. G = A D A H = D; Bal. = A
Number of Contacts 7 7 3 2 4 8 8*
Contac t Si ze 12 16 12 16 12 16 12 for #14 or 16 wi r e
* Solderless CONTACT LEGEND 1 6 1 2 8 4 0
A
B
C
D
E
FGH
J
A
B
C
D
E
F
G
H
J
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
J
KL
M
N
P
A
B
CDE
F
GH
J
A
B
C
A
BC
DA
B
C
D
E
F
G
H
A
BC
E
F
H
J
K
L
M
N
D
A
B
C
D
E
F
G
H
12
AB
C
D
E
AB
C
D
EF
G
H
J
KL
A
B
C
D
E
FH
J
K
L
M
N
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 22-70 22-80 24-2 24 -3 24-5
Service Rating AAD D A
Number of Contacts 8 5 3* 7 2 5 16
Contac t Si ze 12 16 8 for #10 or 12 wire 1 2 1 2 16 16
Insert Arran gement 24-6 24-7 24-9 24-10 24-11
Service Rating A, G, H = D; Bal. = A A A A A
Number of Contacts 8 2 14 2 7 3 6
Contact Size 12 12 16 4 8 8 12
Insert Arran gement 24 -12 24-16 24 -17 24-19 24-20
Se rvice R at in g A A, B, F, G = D; C, D, E = A D A D
Number of Contacts 2 3 1 3 3 2 3 12 2 9
Contac t Si ze 4 12 8 12 16 12 16 16 12 16
* Solderless CONTACT LEGEND 1 6 1 2 8 4 0
A
B
C
D
E
F
G
A
B
C
E
F
G
D
AB
C
DE
FGH
JK
LMN
P
S
R
A
B
C
D
E
F
G
H
AB
C
D
E
F
G
H
J
K
L
M
N
P
IO
AB
A
B
CD
E
F
G
ABC
DEF
G
H
I
A
B
C
D
E
A
B
C
D
E
F
G
A
B
C
DE
F
H
J
K
L
M
N
P
A
B
C
13
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 24 -21 24-22 24-27 24-28 24-51
Service Rating D D E Inst. A
Number of Contacts 1 9 4 7 24 5*
Contac t Si z e 8 16 8 16 16 B, E for AN #10 or 12 wire
A, C, D for AN #8 wire
Insert Arran gement 24 -52 24-53 24-58 24-59 24-60
Service Ratin g Hi-Volt A A A A
Number of Contacts 1 5* 3 3 7 7 7 7*
Contac t Si ze 12 8 8 12 16 12 16 8 for #10 or 12 w ire
Insert Arran gement 24 -65 24-66 24-67 24-71 24-75
Se rvice Rating A D Ins t. A A
Number of Contacts 11 4 7 19 2* 5* 5 2
Contac t Si ze 12 16 12 12 8 8 for #1 0 or 12 wire 8 8 for #16 wire
* Solderless CONTACT LEGEND 1 6 1 2 8 4 0
ABCD
EFGH J
KL
M
NPQ
RST
U
V
WX YZ
A
B
C
D
E
F
G
H
JK
A
BC
DA
B
C
D
E
F
G
A
B
C
D
E
F
H
J
K
LM
N
P
R
A
B
CD
E
F
G
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
A
B
C
D
E
F
G
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
A
B
CD
E
F
G
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
F
HJ
K
L
M
N
P
A
B
CD
E
F
G
14
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 24-79 24-80 24-84 24-96 24-AJ
Service Rating A Inst. A Inst. A
Number of Contacts 5 23 1 18 28 25
Contac t Si ze 8 16 12 12 (Coax) RG-188 /U 16 16
or RG-174/U
Insert Arran gement 28-1 28-2 28-3 28-4
Servic e Rating A, J, E = D; Bal. = A D E G, P, S = E; Bal. = D
Number of Contacts 3 6 2 12 3 2 7
Contac t Si ze 8 12 12 16 8 12 16
Insert Arran gement 28-5 28-6 28-7 28-8
Se r vice Ratin g D D D L, M = E; B = D; Bal. = A
Number of Contacts 2 1 2 3 2 2 10
Contact Size 4 12 1 6 4 4 12 16
CONTACT LEGEND 1 6 1 2 8 4 0
AB
C
D
E
F
G
H
J
A
B
C
D
EF
G
H
J
K
L
M
N
P
A
BC
AB
CD
P
S
EFG
A
B
CD
E
A
BC
AB
A
B
C
D
E
ABCD
EFGHJ
KLMNPQ
RSTU
V
WX Z
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
19
20
21
22
23
24
25
26
27
28
ABCD
EFGHJ
KLMNPQ
RS
T
UV
WXZ
Y
a
A
B
C
D
E
F
G
H
J
K
L
M
15
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 28-9 28 -10 28-11 28-12
Se rvice Rating D G = D; B al. = A A A
Number of Contacts 6 6 2 2 3 4 18 26
Contact Size 12 16 4 8 12 12 16 16
Insert Arran gement 28-13 28-15 28-16 28-17
Service Rating A A A R = B; M, N, P = D; A to L = A
Number of Contacts 26 35 20 15
Contact Size 16 16 16 16
Insert Arran gement 28 -18 28-19 28 -20
Ser vic e Rating M = C; G, H , J, K,L = D; A, B = A; Bal . = Inst. H, M = B; A, B, = D; Bal. = A A
Number of Contacts 12 4 6 10 4
Contac t Si ze 16 12 16 12 16
* Solderless CONTACT LEGEND 1 6 1 2 8 4 0
A
B
C
DE
F
G
H
J
K
LM
A
B
CD
E
F
GA
B
C
D
E
F
G
H
J
K
L
M
I
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
100˚
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
A
B
CD
E
F
G
HJK
L
M
N
P
R
A
B
C
D
E
F
G
H
J
K
L
M
AB
C
E
G
H
J
K
L
M
AB
CDEFG
HJKLM
PRS T
N
W
XYZ
UV
abc
d
e
f
g
h
jk
m
l
AB
C
D
E
F
G
H
J
K
LM
P
Q
R
S
T
U
VN
A
B
C
D
E
F
G
H
J
K
L
M
N
P
100° Rotation
of 32-6
16
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 28-21 28-22 28-51 28-59
Servic e Rating A D A A
Number of Contacts 37 3 3 12 7 10
Contact Size16 416121216
Insert Arran gement 28-66 28-72 28-74 28-75
Servic e Rating A A A
Number of Contacts 2 14 3 9* 4* 3* 9* 7*
Contac t Si ze 8 12 4 (Co ax) RG-59A/U 16 8 8 for #10 wi r e 16 8 for #10 wire
or RG -62A/U (S, T, R)
Insert Arran gement 28 -79 28 -82 28-84 28 -AY
Servic e Rating A D A A
Number of Contacts 7 9 2 4 9 4 5
Contac t Si ze 8 16 8 12 8 4 16
* Solderless CONTACT LEGEND 1 6 1 2 8 4 0
A
B
C
DE
F
A
B
C
D
E
F
H
J
K
L
M
N
AB C D
EFH
JK
LMN
PR S TU
AB
C
D
E
F
H
J
K
L
M
N
PR
S
T
A
BC
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
12
3
45
6
A
B
C
DE
F
G
H
I
A
BC
D
EFGHJ
KLMNPR
STUV WXZ
abcdef
ghjkm
nprs
A
BC
DE F
GH
J
17
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
CONTACT LEGEND 1 6 1 2 8 4 0
Insert Arran gement 32-1 32-2 32-3 32- 4
Ser vice Ra ting A = E; B, C, D, E = D E D F, J, K, N = A:, B a l . = D
Number of Contacts 2 3 3 2 1 2 2 4 2 12
Contac t Si ze 0 12 4 16 0 4 12 16 12 16
Insert Arran gement 32-5 32-6 32-7
Servic e Rating D A A, B, h, j = Inst.; Bal. = A
Number of Contacts 2 2 3 2 16 7 28
Contact Size 0 4 8 12 16 12 1 6
Insert Arran gement 32-8 32-9 32-10
Service Rating A D A, F = E; G = B; B, E = D; C, D = A
Number of Contacts 6 24 2 12 2 2 3
Contac t Si ze 12 16 4 1 6 4 8 16
A
B
CD
E
A
B
C
D
E
A
B
C
DEF
G
H
J
A
B
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
k
AB
CD E F G
HI J K
LMN
A
B
C
D
E
F
G
H
J
K
L
M
N
O
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
B
CD
E
F
G
18
GT Se ries
contact arrangements
A
BC
DE
F
G
H
100˚
AB
CD
EF
GH
IJ
KLM N
O
PR
S
T
UV
WX
A
BC
D
AB
CDE
FGHJ
KLM
NO PR
STUVW
XYZa
bcdef
ghjk
mnpr
t
q
suv
xy
zAA
AB AC
AD AE
AF AG
w
100° Rotation
of 32-6
Insert Arran gement 32- 12 32-13 32-15 32-16
Service Ra ting C, D, E, F, G = A; Bal. = D D D A
Number of Contacts 5 10 5 18 2 6 2 3 2 16
Contac t Size 12 16 12 16 0 1 2 4 8 12 16
Insert Arran gement 32- 17 32-22 32-25 32-31
Servi ce Rating D A A A
Number of Contacts 4 54 25 31
Contact Size 4161216
Insert Arran gement 32- 48 32-52 32-53 32-56
Service Ra ting Inst. D t, u = E; Bal. = Inst. A
Number of Contacts 48 2 6 5 37 24 6
Contact Siz e 16 0 12 12 16 16 1 2 for #10 wire
13
12
11
10
9
876
5
4
3
2
1
23
19 22
21
20
15
18
17
16
14
24
25
90˚
A
BC
DE
F
G
H
ABCDE
F
H
J
K
L
MNP
R
S
T
U
V
W
X
Y
Z
abc
d
f
g
h
i
jk
m
n
p
r
tu
vw
s
q
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26 27
28
29
30 31
90° CW Rotation
of 32-15
AB
CDEFH
JKLMNP
RSTUVWX
YZ
abcd f g
hi jkmn p
qrstuv
wxyzAA
BB CC
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
AB
CD EFG
HJK
LM
OP
N
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
CO NTACT L EGE ND 16 12 8 4 0
front face of pin insert or rear face of socket insert illustrated
19
CONTACT LEGEND 1 6 1 2 8 4 0
** Consult Amphenol, Sidney, NY for service rating of power contacts.
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 32-5 7 32-58 32-59 32-60
Servic e Rating ** A A
Number of Contacts 6 2 4 40 2 15 8
Contac t Si ze 12 0 (C o ax) RG-71 /U 4 ( Coax) RG-161/U 16 8 (C o ax) RG-16 1/U 16 8 (Coax) RG- 1 24/ U
or RG-1 79/U
Insert Arran gement 32-6 2 32-64 32-68
Servic e Rating ** Inst. A
Number of Contacts 2 1 2 16 2 54 12 4
Contac t Si ze 4 8 12 16 8 (C o ax) RG-12 4/U 16 16 4 (Coax) RG-58C/U
Insert Arran gement 32-7 3 32 -75 32-76 3 2 -79
Servi ce Rating A 8, 9 = D A D
Number of Contacts 46 2 7 19 4 1
Contact Siz e 16 1 2 8 (Coax) RG-180B/U 12 4 8
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
AB
CDE
FGHJ
KLM
NOPR
STUVW
XYZ
a
bcdef
ghjk
mnpr
tuv
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
AB
CDE
FG H
J
KLM
NP
QR
1
2
3
4
5
6
7
8
9
1011
12
13
14
15
16
17
18
19
20 21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
1
2
3
4
5
67
89
12 3
4567
8 9 10 11 12
13 14 15 16
17 18 19
A
BC
D
E
A
BC
D
A
B
CD
E
F
H
J
K
LM
N
P
R
S
T
U
V
W
X
Y
Z
a
A
BC
DE
F
G
H
ABC
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
WXY
T
U
Z
ab
c
d
f
g
h
i
j
k
m
npq
w
vst
20
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
A
BC
DE
F
GH
IJKL
M
NOPR
STU
V
WX
Y
Za
bcde
fg hj
k
m
npr
t
u
vw
s
xy
z
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 32-8 2 32 -AF 32-A M 36-1
Servic e Rating A A A D
N u mb er of Co n ta cts 4 12 55 1 4 18
Contac t Si ze 4 16 16 4/0 12 16
Insert Arran gement 36 -3 36-4 36-5
Ser vic e Rating D A = D; B, C = A A
Number of Contacts 3 3 3 4
Contact Size 0 1 2 0 0
Insert Arran gement 36 -6 36-7 36-8
Servic e Rating A A A
Number of Contacts 2 4 7 40 1 46
Contac t Si ze 0 4 12 16 12 16
CO NTACT L EGE ND 16 12 8 4 0 4/0
.
ABC
DE F G H
IJK LMN
OP R S T
UVW
A
B
C
D
E
F
A
BC
A
B
C
D
A
B
C
D
E
F
AB
CDE
FGHJ
KLM
NO PR
STUVW
XY Za
bcdef
ghjk
n
mpr
tuv
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
AH
AB
CDE
FG H
J
KLM
NP
QR
21
110˚
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
Insert Arran gement 36 -9 36-10 36-11
Servic e Rating A A A
Number of Contacts 1 2 14 1 4 48 48
Contac t Si ze 4 8 1 2 16 16 16
Insert Arran gement 3 6-12 36-13 36-14
Servic e Rating A N, P, Q = E; Bal. = A D
Number of Contacts 48 2 15 5 5 6
Contac t Si ze 16 1 2 16 8 12 16
Insert Arran gement 3 6-15 36-16 36-17
Service Ratin g M = D; Bal . = A A A
Number of Contacts 35 7 40 7 40
Contac t Si ze 16 12 16 12 16
110° Rotation
of 36-7
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
CONTACT LEGEND 1 6 1 2 8 4 0
AB
CD E FG
HJK LMN
OPQR STU
VWXY Z a b c
de fg hj k
mnpr
tuvw
s
x
yz
q
100˚
AB
CD EFG
HJK LMN
OPQ RSTU
VWX Y Z a b c
defghj k
mnpr
tuv w
s
x
yz
q
110˚
AB
CD EFG
HJ KLMN
OPQR STU
VWX Y Z a bc
de f g h j k
mnp r
tu vw
s
x
yz
q
A
B
C
D
EF
G
H
J
K
LM
NP
Q
RS
A
B
C
D
E
F
G
H
J
K
L
M
N
IP
Q
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
YZ
a
b
c
d
e
f
gh
j
k
m
100° Rotation
of 36-10
110° Rotation
of 36-10
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
100˚
AB
CDE
FG
HIJ
KLMN
OPRS
T
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
100° Rotation
of 36-7
22
A
B
CD
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
ABC
D
EF HJK
LMNPRS T
U
VWX YZab
cdfg hi jk
mn p r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
1
2
3
4
5
6
7
8
9
10
11
12
13 14
15
16
17
20
21
22
19
18
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 3 6-18 36-20 36-22
Servic e Rating A A D
Number of Contacts 1 2 14 14 2 2 30 22
Contact Size 4 8 12 16 8 12 16 12
Insert Arran gement 3 6-51 36-52 36-54
Servic e Rating D A A
Number of Contacts 2 2 52 8 31
Contac t Si ze 0 4 16 8 16
Insert Arran gement 3 6-55 36-59 36-60
Servic e Rating A A A
Number of Contacts 31 8 50 3 40 7
Contac t Size 16 8 fo r #6 wi r e 16 12 for #1 0 wire 16 12 for #10 wire
CONTACT LEGEND 1 6 1 2 8 4 0
AB
CD E FG
HJK LMN
PRSTUVW
XYZ abc
defg
hj
km
ABC
D
EFHJ
K
LM N P R S
TUV WXY Z
abcdfghi
jkmn p r
tuvw
sx
yz
q
AA AB AC
AD
AE AF
AH
100˚
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
100° Rotation
of 36-9
23
48 49
50 51 52
53 54
55 56 57
58 59 60 61
62 63 64 65 66
67 68 69 70
71 72 73 74 75
76 77 78 79
80 81 82 83
84 85
86 87
88 89
90
91
12
34 5
67
89
10 11
1213
1415
16
17
18
19
202122
2324
25
2627
28
29
30
31 32
33 34
3536
37
38
394041
42 43
4445
4647
48
12
3
45
67 8
910 1112
13 14 15 16 17
18 19 20 21
22 23 24 25 26
27 28 29 30
31 32 33 34 35
36 37 38 39
40 41 42
43 44
45
46 47
A
B
C
D
E
F
G
1
2
3
4
56
7
8
9
10
11
12
13
14
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 3 6-64 36-65 36-71
Servic e Rating A
Number of Contacts 4 4 3 50
Contact Siz e 0 (Coax) RG-11/U 0 (Coa x) RG-59/U, RG-62/ U 12 16
RG -12/ U, or RG-13/ U or RG-71 /U
Insert Arran gement 3 6-73 36-74 36-75
Servic e Rating A A
Number of Contacts 7 43 1 48
Contac t Si ze 4 (Coax) RG- 62B/ U 16 8 (C o ax) RG-18 7/B 16 for #14 wir e
Insert Arran gement 3 6-76 36 -77 36 -78
Servic e Rating A D A
Number of Contacts 47 7 2 12
Contac t Si ze 16 4 16 8
CONTACT LEGEND 1 6 1 2 8 4 0
A
B
C
D
ABC
D
EF HJK
LMNPRS T
U
VWX YZab
cdfg hi jk
mn p r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
A
B
C
D
E
F
G
A
B
C
D
24
AB
C
D
E
F
G
H
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
c
de
f
g
h
j
k
m
n
p
r
t
s
q
u
v
w
x
y
z
A
B
GC
N
1
2
3
4
5
6
7
8
9
10
11
12
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 3 6-79 36-80 36-83
Servic e Rating A A
Number of Contacts 20 20 7
Contac t Si ze 12 12 for #10 wir e 4 (Coax) R G-58/ U
Insert Arran gement 3 6-85 36-97 36-99
Service Ratin g M = D; Bal . = A C D
Number of Contacts 35 1 3333
Contac t Si z e 16 for #12 wire 4/0 4 8 12 16
Insert Arran gement 36-A F 40 -1 40-5
Servic e Rating A D A
Number of Contacts 48 6 24 5
Contac t Si ze 16 1 2 16 0
CO NTACT L EGE ND 16 12 8 4 0 4/0
1
23 45
678 910
11 12 13 14 15
16 17 18 19
20
A
B
C
D
E
F
G
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
j
k
m
e
ABC
DE FG
HI JKL
MNO PRS
TU V WX
YZ ab
cde
1
23 45
678 910
11 12 13 14 15
16 17 18 19
20
25
123
4
5
6
7
8
9
1011
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 40-9 40-10 40-30
Servic e Rating A A A
Number of Contacts 1 22 24 4 9 16 29 1
Contact Size 81216 4 816 124
Insert Arran gement 4 0-35 40-53 40-56
Servic e Rating D A A
Number of Contacts 35 60 85
Contac t Si ze 12 16 16
Insert Arran gement 4 0-57 40-61 40-62
Servic e Rating E A A
Number of Contacts 4 1 3 55 60
Contact Size 0 8 12 16 16
CONTACT LEGEND 1 6 1 2 8 4 0
12
345 67
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49
50 51 52 53 54 55 56
57
58
59
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
3335
36
37
38
39
40
41
42
43
44
45
46
47
34
48
49
50
51
52
53
54
55
56
57
58
59
60
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
20
21
22
23
24
25
26
27
28
29
30
3132
33
34
35
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
1
2
3
4
ABCD
EF H J K LM
NPRSTUVW
XYZab
cdfg
hijkmnp r
tuvw
s
xyz
q
AA AB
AC AD AE AF AH AJ AK AL AM AN
AP AR AS AT
AU AV AW AX AY
AZ BA BB
BV
BC BD BE BF BH
BJ BK BL BM BN
BS BT BU
BP BR
A
B
CD
E
H
K
G
J
F
L
Q
P
N
I
M
RS
O
V
Y
Z
W
U
X
b
a
c
T
AB
CDE
F
GHIJ
KL
MN O PQ
RST
UVWXYZa
bcd
efghi
jk
lm
n
p
r
tu
s
o
q
26
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 40-63 40-64 40-66
Service Rating A
Number of Contacts 61 3 20 13 4
Contact Size 16 for #14 wire 12 16 8 (Coax) RG-124/U 0 (Coax) RG-63 B/U
Insert Arrangement 40-67 40-68 40-70
Service Rating A A A
Number of Contacts 1 10 21 61
Contact Size 16 4 (Coax) RG-59/U 8 16
Insert Arrangement 40-72 40-73 40-74
Service Rating A A A
Number of Contacts 1 10 61 1 1 4
Contact Size 16 4 (Coax) RG-9B/U 16 12 4 (Coax) RG-62/U 0 (Coax) RG-9B/U
or RG-214/U
CONTACT LEGEND 16 12 8 4 0
1
2
3
4
AB
CDE
FH J
KL
M
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
1
2345
678910
11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52
53 54 55 56 57
58 59 60 61
AB
CDE
FH J
KL
M
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
1
2
34
5
6
A
B
C
D
E
F
H
J
K
L
M
N
P
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
i
j
k
m
n
p
q
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
27
front face of pin insert or rear face of socket insert illustrated
GT Series
cont act arr a ng em en ts
Insert Arran g eme n t 40- 75 40-80 40 -81
Servic e Rati ng E A A
Number of Contacts 4 1 10 1 62
Contact Size 0 12 4 16 16 for #14 wire
Insert Arran g eme n t 40- 82 40-85 40 -86
Servic e Rati ng A A
Nu mber o f Contacts 62 60 4
Co n tact Si ze 16 16 for #14 wi re 0 (Coax) RG- 115A/ U
Insert Arran g eme n t 40- 87 40-AD 40-AG
Servic e Rati ng D A A
Number of Contacts 7 4 4 38
Contact Size 4 0 8 12
CONTACT L EGEND 1 6 1 2 8 4 0
1
2
3
4
5
AB
CDE
FH J
KL
M
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
1
2
3
4
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
1
2
3
45
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
A
B
H
GC
D
E
F
1
2
34
5
6
7
28
AB
A
BC
D
E
F
G
H
J
K
L
M
N
1
2
3
45
6
7
89
10
11
12
13
14
15
16
17
18
19
20
21
2223
24
25
26
27
28
29
30
31 32
33
34 35
36
37
38
39
40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
2122
23
24
25
26 27 28 29
30 31 32 33
35 36 37 38
40 41 42 43
34 39
A
B
C
D
E
F
G
H
J
K
L
M
N
PAB
C
front face of pin insert or rear face of socket insert illustrated
GT Se ries
contact arrangements
Insert Arran gement 40-AP 40 -AR 40-AS
Service Rating E Inst. A
Number of Contacts 2 3 3 7 25 15
Contac t Si ze 4/0 0 4 12 12 16
Insert Arran gement 40-AT 40-AU 40-AV
Servic e Rating A A D
Number of Contacts 1 24 18 3 10 1 3
Contact Size 81216 4 816 2/0
CONTACT LEGEND 16 12 8 4 0 2/0 4/ 0
29
GT
Connector
Classes
30
GT00A
wall mount receptacle for front panel mounting
All dim ens i ons for re ference o nl y.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
.000
N
+ .000
.006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
10SL 10.4 9.5 50 18.2 18.2 2.8 18.2 25.4 3.2
14S 13.2 9.5 50 18.2 24.6 3.2 23.0 30.0 3.2
16S 16.2 9.5 50 18.2 27.4 3.2 24.6 32.5 3.2
16 16.2 9.5 60 21.5 27.4 3.2 24.6 32.5 3.2
18 19.2 9.5 60 23.0 30.8 4.0 27.0 35.0 3.2
20 22.0 9.5 60 23.0 34.2 4.0 29.4 38.0 3.2
22 24.5 9.5 60 23.0 37.4 4.0 31.8 41.0 3.2
24 27.8 9.5 65 23.0 40.9 4.0 34.9 44.5 3.7
28 31.2 9.5 65 24.1 46.7 4.0 39.7 50.8 3.7
32 37.8 11.0 65 24.1 53.4 4.0 44.5 57.0 4.3
36 45.2 11.8 80 24.1 59.6 4.0 49.2 63.5 4.3
40 51.2 11.8 80 24.1 65.5 4.0 55.5 69.9 4.3
Four through mounting holes or optional threaded holes
Includes backshell for accessory attachment
Without grommet and cable clamp
Non-environment proof
R
RS
S
T
NF
L
K
MP B
31
GT00AF/00F
wall mount receptacle for front panel mounting
All di m ensions for refer ence on l y.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 Z
Max. KK
Max. LL
Max.
10SL 2.362 .717 .717 .110 .717 1.000 .126 .220 .894 4.720
14S 2.440 .717 .969 .126 .906 1.181 .126 .312 1.083 4.720
16S 2.756 .717 1.079 .126 .969 1.280 .126 .437 1.181 4.720
16 2.756 .846 1.079 .126 .969 1.280 .126 .437 1.181 4.921
18 3.031 .907 1.213 .157 1.063 1.378 .126 .562 1.300 4.921
20 3.031 .907 1.346 .157 1.157 1.496 .126 .625 1.476 4.921
22 3.031 .907 1.472 .157 1.252 1.614 .126 .625 1.476 4.921
24 3.346 .907 1.610 .157 1.374 1.752 .146 .750 1.705 4.921
28 3.346 .947 1.839 .157 1.563 2.000 .146 .750 1.705 4.921
32 3.346 .947 2.102 .157 1.752 2.244 .169 .937 2.035 4.921
36 4.134 .947 2.346 .157 1.937 2.500 .169 1.250 2.283 5.315
40 5.118 .947 2.579 .157 2.185 2.752 .169 1.375 2.579 5.709
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 Z
Max. KK
Max. LL
Max.
10SL 60 18.2 18.2 2.8 18.2 25.4 3.2 5.58 22.7 120
14S 62 18.2 24.6 3.2 23.0 30.0 3.2 7.92 27.5 120
16S 70 18.2 27.4 3.2 24.6 32.5 3.2 11.09 30.0 120
16 70 21.5 27.4 3.2 24.6 32.5 3.2 11.09 30.0 125
18 77 23.0 30.8 4.0 27.0 35.0 3.2 14.27 33.0 125
20 77 23.0 34.2 4.0 29.4 38.0 3.2 15.87 37.5 125
22 77 23.0 37.4 4.0 31.8 41.0 3.2 15.87 37.5 125
24 85 23.0 40.9 4.0 34.9 44.5 3.7 19.05 43.3 125
28 85 24.1 46.7 4.0 39.7 50.8 3.7 19.05 43.3 125
32 85 24.1 53.4 4.0 44.5 57.0 4.3 23.79 51.7 125
36 105 24.1 59.6 4.0 49.2 63.5 4.3 31.75 58.0 135
40 130 24.1 65.5 4.0 55.5 69.9 4.3 34.92 65.5 145
GT00AF
W ithout gr om me t
Cabl e clamp includ ed
Non-environment proof
Four through mounting holes or optional threaded holes
GT00F
With wire sealing grommet and cable clamp
For use with individual w ires
Environment proof
Four through mounting holes or optional threaded holes
N
L
MP
ZKK
LL
R
RS
S
T
32
GT00CF/00CFZ
wall mount receptacle for front panel mounting
GT00CF
Without individual wire sealing grommet
Environment proof
Four through mounting holes or optional threaded holes
Includes clamp to grip and seal jacketed cable
GT00CFZ
Same as GT 00CF except: individual wire sealing grommet
included for added moisture protection
Environment proof
Four through mounting holes or optional threaded holes
Includes clamp to grip and seal jacketed cable
All di m ensions for refer ence on l y.
Inches
Shell
Size L
Approx.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
Z
Open Closed
10SL 2.740 .717 .717 .110 .717 1.000 .126 .312 .094
14S 2.898 .717 .969 .126 .906 1.181 .126 .438 .230
16S 2.898 .717 1.079 .126 .969 1.280 .126 .531 .315
16 3.217 .846 1.079 .126 .969 1.280 .126 .531 .315
18 3.307 .907 1.213 .157 1.063 1.378 .126 .625 .378
20 3.311 .907 1.346 .157 1.157 1.496 .126 .748 .445
22 3.350 .907 1.472 .157 1.252 1.614 .126 .748 .445
24 3.484 .907 1.610 .157 1.374 1.752 .146 .937 .610
28 3.736 .947 1.839 .157 1.563 2.000 .146 .937 .610
32 4.142 .947 2.102 .157 1.752 2.244 .169 1.250 .921
36 4.390 .947 2.346 .157 1.937 2.500 .169 1.378 .921
40 4.988 .947 2.579 .157 2.185 2.752 .169 1.624 1.177
Millimeters
Shell
Size L
Approx.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
Z
Open Closed
10SL 69.6 18.2 18.2 2.8 18.2 25.4 3.2 7.93 2.38
14S 73.6 18.2 24.6 3.2 23.0 30.0 3.2 11.12 5.84
16S 73.6 18.2 27.4 3.2 24.6 32.5 3.2 13.48 8.00
16 81.7 21.5 27.4 3.2 24.6 32.5 3.2 13.48 8.00
18 84.0 23.0 30.8 4.0 27.0 35.0 3.2 15.87 9.60
20 84.1 23.0 34.2 4.0 29.4 38.0 3.2 19.00 11.30
22 85.1 23.0 37.4 4.0 31.8 41.0 3.2 19.00 11.30
24 88.5 23.0 40.9 4.0 34.9 44.5 3.7 23.80 15.50
28 94.9 24.1 46.7 4.0 39.7 50.8 3.7 23.80 15.50
32 105.9 24.1 53.4 4.0 44.5 57.0 4.3 31.75 23.40
36 111.5 24.1 59.6 4.0 49.2 63.5 4.3 35.00 23.40
40 126.7 24.1 65.5 4.0 55.5 69.9 4.3 41.25 29.90
R
RS
S
T
N
L
MP
ZOPEN
CLOSED
33
GT00G
wall mount receptacle for front panel mounting
Four through mounting holes or optional threaded holes
Inclu des backshell with individual wire se a ling grommet
For use with heat-shrink tubing
Environment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size J
± .008 K
± .020 L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .717 .717 .110 .717 1.000 .126 .303 .524 .610 .669
14S .138 .461 1.969 .717 .969 .126 .906 1.181 .126 .417 .669 .752 .791
16S .138 .461 1.969 .717 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
16 .138 .453 2.362 .846 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
18 .138 .453 2.362 .907 1.213 .157 1.063 1.378 .126 .575 .862 .941 1.043
20 .138 .500 2.559 .907 1.346 .157 1.157 1.496 .126 .736 1.031 1.165 1.189
22 .138 .500 2.559 .907 1.472 .157 1.252 1.614 .126 .819 1.031 1.165 1.323
24 .138 .500 2.559 .907 1.610 .157 1.374 1.752 .146 .969 1.358 1.488 1.421
28 .138 .500 2.559 .947 1.839 .157 1.563 2.000 .146 1.062 1.358 1.488 1.630
32 .138 .598 2.756 .947 2.102 .157 1.752 2.244 .169 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .947 2.346 .157 1.937 2.500 .169 1.516 1.717 1.882 2.157
40 .138 .610 3.150 .947 2.579 .157 2.185 2.752 .169 1.898 2.071 2.276 2.402
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 Z
Min. BB
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 18.2 18.2 2.8 18.2 25.4 3.2 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 18.2 24.6 3.2 23.0 30.0 3.2 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 18.2 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5
16 3.5 11.5 60 21.5 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5
18 3.5 11.5 60 23.0 30.8 4.0 27.0 35.0 3.2 14.6 21.9 23.9 26.5
20 3.5 12.7 65 23.0 34.2 4.0 29.4 38.0 3.2 18.7 26.2 29.6 30.2
22 3.5 12.7 65 23.0 37.4 4.0 31.8 41.0 3.2 20.8 26.2 29.6 33.6
24 3.5 12.7 65 23.0 40.9 4.0 34.9 44.5 3.7 24.6 34.5 37.8 36.1
28 3.5 12.7 65 24.1 46.7 4.0 39.7 50.8 3.7 27.0 34.5 37.8 41.4
32 3.5 15.2 70 24.1 53.4 4.0 44.5 57.0 4.3 33.3 43.6 47.8 48.6
36 3.5 15.2 80 24.1 59.6 4.0 49.2 63.5 4.3 38.5 43.6 47.8 54.8
40 3.5 15.5 80 24.1 65.5 4.0 55.5 69.9 4.3 48.2 52.6 57.8 61.0
R
RS
S
T
N
L
MP
KKJJBBZ
J
K
34
GT00LCF/00LCFZ
wall mount receptacle for front panel mounting
GT00LCF
Inclu des a backshell with extended length to p rovide
more worki ng roo m for stri pped jacke ted cable
Environment proof
Four through mounting holes or optional threaded holes
Includes clamp to grip and seal jacketed cable
GT00LCFZ
Same as GT00LCF except: individual wire sealing grom met
included for added moisture protection
Environment proof
Four through mounting holes or optional threaded holes
Includes clamp to grip and seal jacketed cable
All di m ensions for refer ence on l y.
Inches
Shell
Size L
Approx.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
Z
Open Closed
10SL 3.811 .717 .717 .110 .717 1.000 .126 .312 .094
14S 3.843 .717 .969 .126 .906 1.181 .126 .438 .230
16S 3.843 .717 1.079 .126 .969 1.280 .126 .531 .315
16 4.217 .846 1.079 .126 .969 1.280 .126 .531 .315
18 4.409 .907 1.213 .157 1.063 1.378 .126 .625 .378
20 4.409 .907 1.346 .157 1.157 1.496 .126 .748 .445
22 4.413 .907 1.472 .157 1.252 1.614 .126 .748 .445
24 4.535 .907 1.610 .157 1.374 1.752 .146 .937 .610
28 4.744 .947 1.839 .157 1.563 2.000 .146 .937 .610
32 5.079 .947 2.102 .157 1.752 2.244 .169 1.250 .921
36 5.327 .947 2.346 .157 1.937 2.500 .169 1.378 .921
40 5.327 .947 2.579 .157 2.185 2.752 .169 1.624 1.177
Millimeters
Shell
Size L
Approx.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
Z
Open Closed
10SL 96.8 18.2 18.2 2.8 18.2 25.4 3.2 7.93 2.38
14S 97.6 18.2 24.6 3.2 23.0 30.0 3.2 11.12 5.84
16S 97.6 18.2 27.4 3.2 24.6 32.5 3.2 13.48 8.00
16 107.1 21.5 27.4 3.2 24.6 32.5 3.2 13.48 8.00
18 112.0 23.0 30.8 4.0 27.0 35.0 3.2 15.87 9.60
20 112.0 23.0 34.2 4.0 29.4 38.0 3.2 19.00 11.30
22 112.1 23.0 37.4 4.0 31.8 41.0 3.2 19.00 11.30
24 115.2 23.0 40.9 4.0 34.9 44.5 3.7 23.80 15.50
28 120.5 24.1 46.7 4.0 39.7 50.8 3.7 23.80 15.50
32 129.0 24.1 53.4 4.0 44.5 57.0 4.3 31.75 23.40
36 135.3 24.1 59.6 4.0 49.2 63.5 4.3 35.00 23.40
40 135.3 24.1 65.5 4.0 55.5 69.9 4.3 41.25 29.90
R
RS
S
T
N
L
MP
ZOPEN
CLOSED
35
GT00R
wall mount receptacle for front panel mounting
Four through mounting holes or optional threaded holes
Wit h in div idu al wire s eal in g grommet
Includes backshell for conduit termination
Environment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .866 .374 2.362 .907 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
10SL 10.4 9.5 50 18.2 18.2 2.8 18.2 25.4 3.2
14S 13.2 9.5 50 18.2 24.6 3.2 23.0 30.0 3.2
16S 16.2 9.5 50 18.2 27.4 3.2 24.6 32.5 3.2
16 16.2 9.5 60 21.5 27.4 3.2 24.6 32.5 3.2
18 19.2 9.5 60 23.0 30.8 4.0 27.0 35.0 3.2
20 22.0 9.5 60 23.0 34.2 4.0 29.4 38.0 3.2
22 24.5 9.5 60 23.0 37.4 4.0 31.8 41.0 3.2
24 27.8 9.5 65 23.0 40.9 4.0 34.9 44.5 3.7
28 31.2 9.5 65 24.1 46.7 4.0 39.7 50.8 3.7
32 37.8 11.0 65 24.1 53.4 4.0 44.5 57.0 4.3
36 45.2 11.8 80 24.1 59.6 4.0 49.2 63.5 4.3
40 51.2 11.8 80 24.1 65.5 4.0 55.5 69.9 4.3
R
RS
S
T
N
MP
K
F
B
L
36
GT00RV
wall mount receptacle for front panel mounting
Four through mounting holes or optional threaded holes
Includes wire sealing grommet
For use with individual w ires
Environment proof
All di m ensions for refer ence on l y.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 KK
Max.
10SL 1.890 .717 .717 .110 .717 1.000 .126 .787
14S 1.890 .717 .969 .126 .906 1.181 .126 .945
16S 1.890 .717 1.079 .126 .969 1.280 .126 1.024
16 2.205 .846 1.079 .126 .969 1.280 .126 1.024
18 2.244 .907 1.213 .157 1.063 1.378 .126 1.161
20 2.244 .907 1.346 .157 1.157 1.496 .126 1.299
22 2.244 .907 1.472 .157 1.252 1.614 .126 1.417
24 2.244 .907 1.610 .157 1.374 1.752 .146 1.575
28 2.244 .947 1.839 .157 1.563 2.000 .146 1.811
32 2.362 .947 2.102 .157 1.752 2.244 .169 2.028
36 2.362 .947 2.346 .157 1.937 2.500 .169 2.283
40 2.362 .947 2.579 .157 2.185 2.752 .169 2.539
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 KK
Max.
10SL 48.0 18.2 18.2 2.8 18.2 25.4 3.2 20.0
14S 48.0 18.2 24.6 3.2 23.0 30.0 3.2 24.0
16S 48.0 18.2 27.4 3.2 24.6 32.5 3.2 26.0
16 56.0 21.5 27.4 3.2 24.6 32.5 3.2 26.0
18 57.0 23.0 30.8 4.0 27.0 35.0 3.2 29.5
20 57.0 23.0 34.2 4.0 29.4 38.0 3.2 33.0
22 57.0 23.0 37.4 4.0 31.8 41.0 3.2 36.0
24 57.0 23.0 40.9 4.0 34.9 44.5 3.7 40.0
28 57.0 24.1 46.7 4.0 39.7 50.8 3.7 46.0
32 60.0 24.1 53.4 4.0 44.5 57.0 4.3 51.5
36 60.0 24.1 59.6 4.0 49.2 63.5 4.3 58.0
40 60.0 24.1 65.5 4.0 55.5 69.9 4.3 64.5
R
RS
S
T
N
MP
L
KK
37
GT01A
inline receptacle
Includes backshell for accessory attachment
Without wire sealing grommet and cable clamp
Non-environment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max.
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .811 .992
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 1.000 1.173
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 1.126 1.272
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 1.126 1.272
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.248 1.370
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.374 1.488
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.500 1.618
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.626 1.756
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.874 2.004
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 2.126 2.248
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 2.386 2.504
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.618 2.756
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max.
10SL 10.4 9.5 50 18.2 18.2 2.8 20.6 25.2
14S 13.2 9.5 50 18.2 24.6 3.2 25.4 29.8
16S 16.2 9.5 50 18.2 27.4 3.2 28.6 32.3
16 16.2 9.5 60 21.5 27.4 3.2 28.6 32.3
18 19.2 9.5 60 23.0 30.8 4.0 31.7 34.8
20 22.0 9.5 60 23.0 34.2 4.0 34.9 37.8
22 24.5 9.5 60 23.0 37.4 4.0 38.1 41.1
24 27.8 9.5 65 23.0 40.9 4.0 41.3 44.6
28 31.2 9.5 65 24.1 46.7 4.0 47.6 50.9
32 37.8 11.0 65 24.1 53.4 4.0 54.0 57.1
36 45.2 11.8 80 24.1 59.6 4.0 60.6 63.6
40 51.2 11.8 80 24.1 65.5 4.0 66.5 70.0
N
MP
L
F
K
B
Q
S
38
GT01AF/01F
inline receptacle
All di m ensions for refer ence on l y.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max. Z
Nominal KK
Max. LL
Max.
10SL 2.362 .717 .717 .110 .811 .992 .220 .894 4.720
14S 2.440 .717 .969 .126 1.000 1.173 .312 1.083 4.720
16S 2.756 .717 1.079 .126 1.126 1.272 .437 1.181 4.720
16 2.756 .846 1.079 .126 1.126 1.272 .437 1.181 4.921
18 3.031 .907 1.213 .157 1.248 1.370 .562 1.300 4.921
20 3.031 .907 1.346 .157 1.374 1.488 .625 1.476 4.921
22 3.031 .907 1.472 .157 1.500 1.618 .625 1.476 4.921
24 3.346 .907 1.610 .157 1.626 1.756 .750 1.705 4.921
28 3.346 .947 1.839 .157 1.874 2.004 .750 1.705 4.921
32 3.346 .947 2.102 .157 2.126 2.248 .937 2.035 4.921
36 4.134 .947 2.346 .157 2.386 2.504 1.250 2.283 5.315
40 5.118 .947 2.579 .157 2.618 2.756 1.375 2.579 5.709
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max. Z
Nominal KK
Max. LL
Max.
10SL 60 18.2 18.2 2.8 20.6 25.2 5.58 22.7 120
14S 62 18.2 24.6 3.2 25.4 29.8 7.92 27.5 120
16S 70 18.2 27.4 3.2 28.6 32.3 11.09 30.0 120
16 70 21.5 27.4 3.2 28.6 32.3 11.09 30.0 125
18 77 23.0 30.8 4.0 31.7 34.8 14.27 33.0 125
20 77 23.0 34.2 4.0 34.9 37.8 15.87 37.5 125
22 77 23.0 37.4 4.0 38.1 41.1 15.87 37.5 125
24 85 23.0 40.9 4.0 41.3 44.6 19.05 43.3 125
28 85 24.1 46.7 4.0 47.6 50.9 19.05 43.3 125
32 85 24.1 53.4 4.0 54.0 57.1 23.79 51.7 125
36 105 24.1 59.6 4.0 60.6 63.6 31.75 58.0 135
40 130 24.1 65.5 4.0 66.5 70.0 34.92 65.5 145
GT01AF
With cable clamp
Wire sealing grommet not included
Non-environment proof
GT01F
With wire sea ling grommet and c a ble clamp
For use with individual wires
Environment proof
Q
S
N
L
MP
Z
KK
LL
39
GT01G
inline receptacle
Includes wire sealing grommet
For use with heat-shrink tubing
Enviro nment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size J
± .008 K
± .020 L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max. Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .717 .717 .110 .811 .992 .303 .524 .610 .669
14S .138 .461 1.969 .717 .969 .126 1.000 1.173 .417 .669 .752 .791
16S .138 .461 1.969 .717 1.079 .126 1.126 1.272 .531 .862 .941 .925
16 .138 .453 2.362 .846 1.079 .126 1.126 1.272 .531 .862 .941 .925
18 .138 .453 2.362 .907 1.213 .157 1.248 1.370 .575 .862 .941 1.043
20 .138 .500 2.559 .907 1.346 .157 1.374 1.488 .736 1.031 1.165 1.189
22 .138 .500 2.559 .907 1.472 .157 1.500 1.618 .819 1.031 1.165 1.323
24 .138 .500 2.559 .907 1.610 .157 1.626 1.756 .969 1.358 1.488 1.421
28 .138 .500 2.559 .947 1.839 .157 1.874 2.004 1.063 1.358 1.488 1.630
32 .138 .598 2.756 .947 2.102 .157 2.126 2.248 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .947 2.346 .157 2.386 2.504 1.516 1.717 1.882 2.157
40 .138 .610 3.150 .947 2.579 1.57 2.618 2.756 1.898 2.071 2.276 2.402
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max. Z
Min. B
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 18.2 18.2 2.8 20.6 25.2 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 18.2 24.6 3.2 25.4 29.8 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 18.2 27.4 3.2 28.6 32.3 13.5 21.9 23.9 23.5
16 3.5 11.5 60 21.5 27.4 3.2 28.6 32.3 13.5 21.9 23.9 23.5
18 3.5 11.5 60 23.0 30.8 4.0 31.7 34.8 14.6 21.9 23.9 26.5
20 3.5 12.7 65 23.0 34.2 4.0 34.9 37.8 18.7 26.2 29.6 30.2
22 3.5 12.7 65 23.0 37.4 4.0 38.1 41.1 20.8 26.2 29.6 33.6
24 3.5 12.7 65 23.0 40.9 4.0 41.3 44.6 24.6 34.5 37.8 36.1
28 3.5 12.7 65 24.1 46.7 4.0 47.6 50.9 27.0 34.5 37.8 41.4
32 3.5 15.2 70 24.1 53.4 4.0 54.0 57.1 33.3 43.6 47.8 48.6
36 3.5 15.2 80 24.1 59.6 4.0 60.6 63.6 38.5 43.6 47.8 54.8
40 3.5 15.5 80 24.1 65.5 4.0 66.5 70.0 48.2 52.6 57.8 61.0
Q
S
N
L
MP
KKJJBBZ
J
K
40
GT01LCF/01LCFZ
inline receptacle
GT01LCF
Long back s hell provides more working room for
stripped jacketed cable
Includes cable clamp to grip and seal
jacketed cable
Enviro nment proof
GT01LCFZ
Same as GT01LCF except: individual wire sealing grom met
included for added moisture protection
Environment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size L
Approx.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max.
Z
Open Closed
10SL 3.811 .717 .717 .110 .811 .992 .312 .094
14S 3.843 .717 .969 .126 1.000 1.173 .438 .230
16S 3.843 .717 1.079 .126 1.126 1.272 .531 .315
16 4.217 .846 1.079 .126 1.126 1.272 .531 .315
18 4.409 .907 1.213 .157 1.248 1.370 .625 .378
20 4.409 .907 1.346 .157 1.374 1.488 .748 .445
22 4.413 .907 1.472 .157 1.500 1.618 .748 .445
24 4.535 .907 1.610 .157 1.626 1.756 .937 .610
28 4.744 .947 1.839 .157 1.874 2.004 .937 .610
32 5.079 .947 2.102 .157 2.126 2.248 1.250 .921
36 5.327 .947 2.346 .157 2.386 2.504 1.378 .921
40 5.327 .947 2.579 .157 2.618 2.756 1.624 1.177
Millimeters
Shell
Size L
Approx.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max.
Z
Open Closed
10SL 96.8 18.2 18.2 2.8 20.6 25.2 7.93 2.38
14S 97.6 18.2 24.6 3.2 25.4 29.8 11.12 5.84
16S 97.6 18.2 27.4 3.2 28.6 32.3 13.48 8.00
16 107.1 21.5 27.4 3.2 28.6 32.3 13.48 8.00
18 112.0 23.0 30.8 4.0 31.7 34.8 15.87 9.60
20 112.0 23.0 34.2 4.0 34.9 37.8 19.00 11.30
22 112.1 23.0 37.4 4.0 38.1 41.1 19.00 11.30
24 115.2 23.0 40.9 4.0 41.3 44.6 23.80 15.50
28 120.5 24.1 46.7 4.0 47.6 50.9 23.80 15.50
32 129.0 24.1 53.4 4.0 54.0 57.1 31.75 23.40
36 135.3 24.1 59.6 4.0 60.6 63.6 35.00 23.40
40 135.3 24.1 65.5 4.0 66.5 70.0 41.25 29.90
Q
S
N
L
MP
ZOPEN
CLOSED
41
GT01R
inline receptacle
Wit h individu al wire seali ng grommet
Includes backshell for conduit termination
Enviro nment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max.
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .811 .992
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 1.000 1.173
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 1.126 1.272
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 1.126 1.272
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.248 1.370
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.374 1.488
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.500 1.618
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.626 1.756
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.874 2.004
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 2.126 2.248
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 2.386 2.504
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.618 2.756
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max.
10SL 10.4 9.5 50 18.2 18.2 2.8 20.6 25.2
14S 13.2 9.5 50 18.2 24.6 3.2 25.4 29.8
16S 16.2 9.5 50 18.2 27.4 3.2 28.6 32.3
16 16.2 9.5 60 21.5 27.4 3.2 28.6 32.3
18 19.2 9.5 60 23.0 30.8 4.0 31.7 34.8
20 22.0 9.5 60 23.0 34.2 4.0 34.9 37.8
22 24.5 9.5 60 23.0 37.4 4.0 38.1 41.1
24 27.8 9.5 65 23.0 40.9 4.0 41.3 44.6
28 31.2 9.5 65 24.1 46.7 4.0 47.6 50.9
32 37.8 11.0 65 24.1 53.4 4.0 54.0 57.1
36 45.2 11.8 80 24.1 59.6 4.0 60.6 63.6
40 51.2 11.8 80 24.1 65.5 4.0 66.5 70.0
N
MP
L
F
K
B
Q
S
42
GT01RV
inline receptacle
Includes wire sealing grommet
For use with individual wires
Enviro nment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 Q
± .008 S
Max. KK
Max.
10SL 1.890 .717 .717 .110 .811 .992 .787
14S 1.890 .717 .969 .126 1.000 1.173 .945
16S 1.890 .717 1.079 .126 1.126 1.272 1.024
16 2.205 .846 1.079 .126 1.126 1.272 1.024
18 2.244 .907 1.213 .157 1.248 1.370 1.161
20 2.244 .907 1.346 .157 1.374 1.488 1.299
22 2.244 .907 1.472 .157 1.500 1.618 1.417
24 2.244 .907 1.610 .157 1.626 1.756 1.575
28 2.244 .947 1.839 .157 1.874 2.004 1.811
32 2.362 .947 2.102 .157 2.126 2.248 2.028
36 2.362 .947 2.346 .157 2.386 2.504 2.283
40 2.362 .947 2.579 .157 2.618 2.756 2.539
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 Q
± 0.2 S
Max. KK
Max.
10SL 48.0 18.2 18.2 2.8 20.6 25.2 20.0
14S 48.0 18.2 24.6 3.2 25.4 29.8 24.0
16S 48.0 18.2 27.4 3.2 28.6 32.3 26.0
16 56.0 21.5 27.4 3.2 28.6 32.3 26.0
18 57.0 23.0 30.8 4.0 31.7 34.8 29.5
20 57.0 23.0 34.2 4.0 34.9 37.8 33.0
22 57.0 23.0 37.4 4.0 38.1 41.1 36.0
24 57.0 23.0 40.9 4.0 41.3 44.6 40.0
28 57.0 24.1 46.7 4.0 47.6 50.9 46.0
32 60.0 24.1 53.4 4.0 54.0 57.1 51.5
36 60.0 24.1 59.6 4.0 60.6 63.6 58.0
40 60.0 24.1 65.5 4.0 66.5 70.0 64.5
Q
S
N
MP
L
KK
43
R
RS
S
T
N
MP
KK
L
82º
T
GT02R/02RFS
box mount receptacle for front panel mounting
All dim ens i ons for re ference o nl y.
Inches
Shell
Size L
± .012
M
+.016
.000
N
+ .000
–.006 P
±.008 R
± .004 S
±.012
T
+ .004
–.000 KK
Max.
10SL 1.087 .717 .717 .110 .717 1.000 .126 .626
14S 1.087 .717 .969 .126 .906 1.181 .126 .756
16S 1.087 .717 1.079 .126 .969 1.280 .126 .882
16 1.331 .846 1.079 .126 .969 1.280 .126 .882
18 1.331 .907 1.213 .157 1.063 1.378 .126 1.008
20 1.331 .907 1.346 .157 1.157 1.496 .126 1.142
22 1.331 .907 1.472 .157 1.252 1.614 .126 1.268
24 1.331 .907 1.610 .157 1.374 1.752 .146 1.390
28 1.406 .947 1.839 .157 1.563 2.000 .146 1.630
32 1.469 .947 2.102 .157 1.752 2.244 .169 1.882
36 1.469 .947 2.346 .157 1.937 2.500 .169 2.063
40 1.469 .947 2.579 .157 2.185 2.752 .169 2.323
Shell
Size L
±0.3
M
+0.4
–0.0
N
+0.00
–0.15 P
±0.2 R
±0.1 S
±0.3
T
+0.1
–0.0 KK
Max.
10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2 15.9
14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2 19.2
16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2 22.4
16 33.8 21.5 27.4 3.2 24.6 32.5 3.2 22.4
18 33.8 23.0 30.8 4.0 27.0 35.0 3.2 25.6
20 33.8 23.0 34.2 4.0 29.4 38.0 3.2 29.0
22 33.8 23.0 37.4 4.0 31.8 41.0 3.2 32.2
24 33.8 23.0 40.9 4.0 34.9 44.5 3.7 35.3
28 35.7 24.1 46.7 4.0 39.7 50.8 3.7 41.4
32 37.3 24.1 53.4 4.0 44.5 57.0 4.3 47.8
36 37.3 24.1 59.6 4.0 49.2 63.5 4.3 52.4
40 37.3 24.1 65.5 4.0 55.5 69.9 4.3 59.0
GT02R
Environment p roof when mount ed wi th proper pa nel
sealing gasket (see page 79)
For rear mounting information see page 85
GT02RFS
S ame as GT02R ex cep t moun ting hol es are cou nte rs unk to allo w
mating of plugs with rubber covered coupling nuts
GT02RFS
Countersunk holes required
when mating with GT06CFGG,
page 55 and GT08CFGG,
page 73
44
R
RS
T
82º
T
R
RS
S
82º
T
N
MP
L
B
GT020R/020RFSM
box mount receptacle for front panel mounting
All dim ens i ons for re ference o nl y.
Inches
Shell
Size
B
Thread
Class 2A L
± .012
M
+.016
.000
N
+ .000
–.006 P
±.008 R
± .004 S
±.012
T
+ .004
–.000
10SL .6250-24UNEF 1.087 .717 .717 .110 .717 1.000 .126
14S .7500-20UNEF 1.087 .717 .969 .126 .906 1.181 .126
16S .8750-20UNEF 1.087 .717 1.079 .126 .969 1.280 .126
16 .8750-20UNEF 1.331 .846 1.079 .126 .969 1.280 .126
18 1.0000-20UNEF 1.331 .907 1.213 .157 1.063 1.378 .126
20 1.1250-18UNEF 1.331 .907 1.346 .157 1.157 1.496 .126
22 1.2500-18UNEF 1.331 .907 1.472 .157 1.252 1.614 .126
24 1.3750-18UNEF 1.331 .907 1.610 .157 1.374 1.752 .146
28 1.6250-18UNEF 1.406 .947 1.839 .157 1.563 2.000 .146
32 1.8750-16UN 1.469 .947 2.102 .157 1.752 2.244 .169
36 2.0625-16UN 1.469 .947 2.346 .157 1.937 2.500 .169
40 2.3125-16UN 1.469 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size L
±0.3
M
+0.4
–0.0
N
+0.00
–0.15 P
±0.2 R
±0.1 S
±0.3
T
+0.1
–0.0
10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2
14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2
16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2
16 33.8 21.5 27.4 3.2 24.6 32.5 3.2
18 33.8 23.0 30.8 4.0 27.0 35.0 3.2
20 33.8 23.0 34.2 4.0 29.4 38.0 3.2
22 33.8 23.0 37.4 4.0 31.8 41.0 3.2
24 33.8 23.0 40.9 4.0 34.9 44.5 3.7
28 35.7 24.1 46.7 4.0 39.7 50.8 3.7
32 37.3 24.1 53.4 4.0 44.5 57.0 4.3
36 37.3 24.1 59.6 4.0 49.2 63.5 4.3
40 37.3 24.1 65.5 4.0 55.5 69.9 4.3
GT020R
Threaded rear to accept accessory hardware
Environment p roof when mount ed wi th proper
panel sealing gasket (see page 79)
For rear mounting information see page 85
GT020RFSM
Same as GT020R except mounting holes are countersunk
to al low mat ing o f pl ugs wi th ru bber covere d coupling nuts
GT020RFSM
Countersunk holes require d
when mating with GT 06CFGG,
page 55 and GT08C FGG,
page 73
45
GT030
square flange receptacle for rear panel mounting
All dim ens i ons for re ference o nl y.
Inches
Shell
Size
B
Thread
Class 2A L
± .012
M
+.016
.000
N
+ .000
–.006 P
±.008 R
± .004 S
±.012
T
+ .004
–.000
10SL .6250-24UNEF 1.087 .717 .717 .110 .717 1.000 .126
14S .7500-20UNEF 1.087 .717 .969 .126 .906 1.181 .126
16S .8750-20UNEF 1.087 .717 1.079 .126 .969 1.280 .126
16 .8750-20UNEF 1.331 .846 1.079 .126 .969 1.280 .126
18 1.0000-20UNEF 1.331 .907 1.213 .157 1.063 1.378 .126
20 1.1250-18UNEF 1.331 .907 1.346 .157 1.157 1.496 .126
22 1.2500-18UNEF 1.331 .907 1.472 .157 1.252 1.614 .126
24 1.3750-18UNEF 1.331 .907 1.610 .157 1.374 1.752 .146
28 1.6250-18UNEF 1.406 .947 1.839 .157 1.563 2.000 .146
32 1.8750-16UN 1.469 .947 2.102 .157 1.752 2.244 .169
36 2.0625-16UN 1.469 .947 2.346 .157 1.937 2.500 .169
40 2.3125-16UN 1.469 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size L
±0.3
M
+0.4
–0.0
N
+0.00
–0.15 P
±0.2 R
±0.1 S
±0.3
T
+0.1
–0.0
10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2
14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2
16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2
16 33.8 21.5 27.4 3.2 24.6 32.5 3.2
18 33.8 23.05 30.8 4.0 27.0 35.0 3.2
20 33.8 23.05 34.2 4.0 29.4 38.0 3.2
22 33.8 23.05 37.4 4.0 31.8 41.0 3.2
24 33.8 23.05 40.9 4.0 34.9 44.5 3.7
28 35.7 24.05 46.7 4.0 39.7 50.8 3.7
32 37.3 24.05 53.4 4.0 44.5 57.0 4.3
36 37.3 24.05 59.6 4.0 49.2 63.5 4.3
40 37.3 24.05 65.5 4.0 55.5 69.9 4.3
Four through mounting holes or optional threaded holes
Threaded rear to accept accessory attachment
Environment proof when mounted with a proper
sealing gasket (see page 79)
R
RS
S
T
N
M
RS N
P
B
L
46
GT030A
square flange receptacle for rear panel mounting
Four through mounting holes or optional threaded holes
Backshell included for accessory attachment
Without a wire sealing grommet and cable clamp
Non-environment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
10SL 10.4 9.5 50 18.20 18.2 2.8 18.2 25.4 3.2
14S 13.2 9.5 50 18.20 24.6 3.2 23.0 30.0 3.2
16S 16.2 9.5 50 18.20 27.4 3.2 24.6 32.5 3.2
16 16.2 9.5 60 21.50 27.4 3.2 24.6 32.5 3.2
18 19.2 9.5 60 23.05 30.8 4.0 27.0 35.0 3.2
20 22.0 9.5 60 23.05 34.2 4.0 29.4 38.0 3.2
22 24.5 9.5 60 23.05 37.4 4.0 31.8 41.0 3.2
24 27.8 9.5 65 23.05 40.9 4.0 34.9 44.5 3.7
28 31.2 9.5 65 24.05 46.7 4.0 39.7 50.8 3.7
32 37.8 11.0 65 24.05 53.4 4.0 44.5 57.0 4.3
36 45.2 11.8 80 24.05 59.6 4.0 49.2 63.5 4.3
40 51.2 11.8 80 24.05 65.5 4.0 55.5 69.9 4.3
R
RS
S
T
NF
L
K
MP B
47
GT030AF/030F
square flange receptacle for rear panel mounting
All di m ensions for refer ence on l y.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 Z
Nominal KK
Max. LL
Max.
10SL 2.362 .717 .717 .110 .717 1.000 .126 .220 .894 4.720
14S 2.440 .717 .969 .126 .906 1.181 .126 .312 1.083 4.720
16S 2.756 .717 1.079 .126 .969 1.280 .126 .437 1.181 4.720
16 2.756 .846 1.079 .126 .969 1.280 .126 .437 1.181 4.921
18 3.031 .907 1.213 .157 1.063 1.378 .126 .562 1.300 4.921
20 3.031 .907 1.346 .157 1.157 1.496 .126 .625 1.476 4.921
22 3.031 .907 1.472 .157 1.252 1.614 .126 .625 1.476 4.921
24 3.346 .907 1.610 .157 1.374 1.752 .146 .750 1.705 4.921
28 3.346 .947 1.839 .157 1.563 2.000 .146 .750 1.705 4.921
32 3.346 .947 2.102 .157 1.752 2.244 .169 .937 2.035 4.921
36 4.134 .947 2.346 .157 1.937 2.500 .169 1.250 2.283 5.315
40 5.118 .947 2.579 .157 2.185 2.752 .169 1.375 2.579 5.709
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 Z
Nominal KK
Max. LL
Max.
10SL 60 18.20 18.2 2.8 18.2 25.4 3.2 5.58 22.7 120
14S 62 18.20 24.6 3.2 23.0 30.0 3.2 7.92 27.5 120
16S 70 18.20 27.4 3.2 24.6 32.5 3.2 11.09 30.0 120
16 70 21.50 27.4 3.2 24.6 32.5 3.2 11.09 30.0 125
18 77 23.05 30.8 4.0 27.0 35.0 3.2 14.27 33.0 125
20 77 23.05 34.2 4.0 29.4 38.0 3.2 15.87 37.5 125
22 77 23.05 37.4 4.0 31.8 41.0 3.2 15.87 37.5 125
24 85 23.05 40.9 4.0 34.9 44.5 3.7 19.05 43.3 125
28 85 24.05 46.7 4.0 39.7 50.8 3.7 19.05 43.3 125
32 85 24.05 53.4 4.0 44.5 57.0 4.3 23.79 51.7 125
36 105 24.05 59.6 4.0 49.2 63.5 4.3 31.75 58.0 135
40 130 24.05 65.5 4.0 55.5 69.9 4.3 34.92 65.5 145
GT030AF
Includes a cable clamp
Wire sealing grommet not included
Non-environment proof
Four through mounting holes or optional threaded holes
GT030F
Includes a wire sealing grommet and cable clamp
For use with individual wires
Environment proof
Four through mounting holes or optional threaded holes
R
RS
S
T
RSN
L
MP
ZKK
LL
48
GT030G
square flange receptacle for rear panel mounting
Four through mounting holes or optional threaded holes
With wire sea ling grommet for individual wires
Includes backsh ell for use with heat-shrink tubing
Enviro nment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size J
± .008 K
± .020 L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .717 .717 .110 .717 1.000 .126 .303 .524 .610 .669
14S .138 .461 1.969 .717 .969 .126 .906 1.181 .126 .417 .669 .752 .791
16S .138 .461 1.969 .717 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
16 .138 .453 2.362 .846 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
18 .138 .453 2.362 .907 1.213 .157 1.063 1.378 .126 .575 .862 .941 1.043
20 .138 .500 2.559 .907 1.346 .157 1.157 1.496 .126 .736 1.031 1.165 1.189
22 .138 .500 2.559 .907 1.472 .157 1.252 1.614 .126 .819 1.031 1.165 1.323
24 .138 .500 2.559 .907 1.610 .157 1.374 1.752 .146 .969 1.358 1.488 1.421
28 .138 .500 2.559 .947 1.839 .157 1.563 2.000 .146 1.063 1.358 1.488 1.630
32 .138 .598 2.756 .947 2.102 .157 1.752 2.244 .169 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .947 2.346 .157 1.937 2.500 .169 1.516 1.717 1.882 2.157
40 .138 .610 3.150 .947 2.579 1.57 2.185 2.752 .169 1.898 2.071 2.276 2.402
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 Z
Min. B
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 18.20 18.2 2.8 18.2 25.4 3.2 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 18.20 24.6 3.2 23.0 30.0 3.2 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 18.20 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5
16 3.5 11.5 60 21.50 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5
18 3.5 11.5 60 23.05 30.8 4.0 27.0 35.0 3.2 14.6 21.9 23.9 26.5
20 3.5 12.7 65 23.05 34.2 4.0 29.4 38.0 3.2 18.7 26.2 29.6 30.2
22 3.5 12.7 65 23.05 37.4 4.0 31.8 41.0 3.2 20.8 26.2 29.6 33.6
24 3.5 12.7 65 23.05 40.9 4.0 34.9 44.5 3.7 24.6 34.5 37.8 36.1
28 3.5 12.7 65 24.05 46.7 4.0 39.7 50.8 3.7 27.0 34.5 37.8 41.4
32 3.5 15.2 70 24.05 53.4 4.0 44.5 57.0 4.3 33.3 43.6 47.8 48.6
36 3.5 15.2 80 24.05 59.6 4.0 49.2 63.5 4.3 38.5 43.6 47.8 54.8
40 3.5 15.5 80 24.05 65.5 4.0 55.5 69.9 4.3 48.2 52.6 57.8 61.0
R
RS
S
T
N
L
MP
KKJJBBZ
J
K
49
GT030LCF/030LCFZ
square flange receptacle for rear panel mounting
All dim ens i ons for re ference o nl y.
Inches
Shell
Size L
Approx.
M
+.016
–.000
N
+.000
–.006 P
±.008 R
±.004 S
±.012
T
+.004
–.000
Z
Open Closed
10SL 3.811 .717 .717 .110 .717 1.000 .126 .312 .094
14S 3.843 .717 .969 .126 .906 1.181 .126 .438 .230
16S 3.843 .717 1.079 .126 .969 1.280 .126 .531 .315
16 4.217 .846 1.079 .126 .969 1.280 .126 .531 .315
18 4.409 .907 1.213 .157 1.063 1.378 .126 .625 .378
20 4.409 .907 1.346 .157 1.157 1.496 .126 .748 .445
22 4.413 .907 1.472 .157 1.252 1.614 .126 .748 .445
24 4.535 .907 1.610 .157 1.374 1.752 .146 .937 .610
28 4.744 .947 1.839 .157 1.563 2.000 .146 .937 .610
32 5.079 .947 2.102 .157 1.752 2.244 .169 1.250 .921
36 5.327 .947 2.346 .157 1.937 2.500 .169 1.378 .921
40 5.327 .947 2.579 1.57 2.185 2.752 .169 1.624 1.177
Millimeters
Shell
Size L
Approx.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
Z
Open Closed
10SL 96.8 18.20 18.2 2.8 18.2 25.4 3.2 7.93 2.38
14S 97.6 18.20 24.6 3.2 23.0 30.0 3.2 11.12 5.84
16S 97.6 18.20 27.4 3.2 24.6 32.5 3.2 13.48 8.00
16 107.1 21.50 27.4 3.2 24.6 32.5 3.2 13.48 8.00
18 112.0 23.05 30.8 4.0 27.0 35.0 3.2 15.87 9.60
20 112.0 23.05 34.2 4.0 29.4 38.0 3.2 19.00 11.30
22 112.1 23.05 37.4 4.0 31.8 41.0 3.2 19.00 11.30
24 115.2 23.05 40.9 4.0 34.9 44.5 3.7 23.80 15.50
28 120.5 24.05 46.7 4.0 39.7 50.8 3.7 23.80 15.50
32 129.0 24.05 53.4 4.0 44.5 57.0 4.3 31.75 23.40
36 135.3 24.05 59.6 4.0 49.2 63.5 4.3 35.00 23.40
40 135.3 24.05 65.5 4.0 55.5 69.9 4.3 41.25 29.90
GT030LCFZ
Same as GT030LCF except: Individual wire sealing
grommet for added moisture protection
En vironme nt proof
GT030LCF
Four through mounting holes or optional threaded holes
With cable clamp and seal
Long back s hell provides more work in g room for ja cketed cable
Enviro nment proof
R
RS
S
T
N
L
MP
ZOPEN
CLOSED
50
GT030R
square flange receptacle for rear panel mounting
Four through mounting holes or optional threaded holes
With a wire sealing grommet for individual wires
Includes backshell for conduit termination
Enviro nment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size F
Min. K
Min. L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
10SL 10.4 9.5 50 18.20 18.2 2.8 18.2 25.4 3.2
14S 13.2 9.5 50 18.20 24.6 3.2 23.0 30.0 3.2
16S 16.2 9.5 50 18.20 27.4 3.2 24.6 32.5 3.2
16 16.2 9.5 60 21.50 27.4 3.2 24.6 32.5 3.2
18 19.2 9.5 60 23.05 30.8 4.0 27.0 35.0 3.2
20 22.0 9.5 60 23.05 34.2 4.0 29.4 38.0 3.2
22 24.5 9.5 60 23.05 37.4 4.0 31.8 41.0 3.2
24 27.8 9.5 65 23.05 40.9 4.0 34.9 44.5 3.7
28 31.2 9.5 65 24.05 46.7 4.0 39.7 50.8 3.7
32 37.8 11.0 65 24.05 53.4 4.0 44.5 57.0 4.3
36 45.2 11.8 80 24.05 59.6 4.0 49.2 63.5 4.3
40 51.2 11.8 80 24.05 65.5 4.0 55.5 69.9 4.3
R
RS
S
T
NF
L
K
MP B
51
GT030RV
square flange receptacle for rear panel mounting
Four through mounting holes or optional threaded holes
With wire sea ling grommet for individual wires
Enviro nment proof
All di m ensions for refer ence on l y.
Inches
Shell
Size L
Max.
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000 KK
Max.
10SL 1.890 .717 .717 .110 .717 1.000 .126 .787
14S 1.890 .717 .969 .126 .906 1.181 .126 .945
16S 1.890 .717 1.079 .126 .969 1.280 .126 1.024
16 2.205 .846 1.079 .126 .969 1.280 .126 1.024
18 2.244 .907 1.213 .157 1.063 1.378 .126 1.161
20 2.244 .907 1.346 .157 1.157 1.496 .126 1.299
22 2.244 .907 1.472 .157 1.252 1.614 .126 1.417
24 2.244 .907 1.610 .157 1.374 1.752 .146 1.575
28 2.244 .947 1.839 .157 1.563 2.000 .146 1.811
32 2.362 .947 2.102 .157 1.752 2.244 .169 2.028
36 2.362 .947 2.346 .157 1.937 2.500 .169 2.283
40 2.362 .947 2.579 .157 2.185 2.752 .169 2.539
Millimeters
Shell
Size L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0 KK
Max.
10SL 48.0 18.20 18.2 2.8 18.2 25.4 3.2 20.0
14S 48.0 18.20 24.6 3.2 23.0 30.0 3.2 24.0
16S 48.0 18.20 27.4 3.2 24.6 32.5 3.2 26.0
16 56.0 21.50 27.4 3.2 24.6 32.5 3.2 26.0
18 57.0 23.05 30.8 4.0 27.0 35.0 3.2 29.5
20 57.0 23.05 34.2 4.0 29.4 38.0 3.2 33.0
22 57.0 23.05 37.4 4.0 31.8 41.0 3.2 36.0
24 57.0 23.05 40.9 4.0 34.9 44.5 3.7 40.0
28 57.0 24.05 46.7 4.0 39.7 50.8 3.7 46.0
32 60.0 24.05 53.4 4.0 44.5 57.0 4.3 51.5
36 60.0 24.05 59.6 4.0 49.2 63.5 4.3 58.0
40 60.0 24.05 65.5 4.0 55.5 69.9 4.3 64.5
R
RS
S
T
N
MP
L
KK
52
GT06A
straight plug
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max. Q
Max.
10SL .6250-24UNEF .409 .374 1.969 .898
14S .7500-20UNEF .520 .374 1.969 1.150
16S .8750-20UNEF .638 .374 1.969 1.260
16 .8750-20UNEF .638 .374 2.362 1.260
18 1.0000-20UNEF .756 .374 2.362 1.437
20 1.1875-18UNEF .867 .374 2.362 1.571
22 1.1875-18UNEF .965 .374 2.362 1.697
24 1.4375-18UNEF 1.094 .374 2.560 1.835
28 1.4375-18UNEF 1.228 .374 2.560 2.102
32 1.7500-18UNS 1.488 .433 2.560 2.366
36 2.0000-18UNS 1.780 .465 3.150 2.610
40 2.2500-16UN 2.016 .465 3.150 2.850
Millimeters
Shell
Size F
Min. K
Min. L
Max. Q
Max.
10SL 10.4 9.5 50 22.8
14S 13.2 9.5 50 29.2
16S 16.2 9.5 50 32.0
16 16.2 9.5 60 32.0
18 19.2 9.5 60 36.5
20 22.0 9.5 60 39.9
22 24.5 9.5 60 43.1
24 27.8 9.5 65 46.6
28 31.2 9.5 65 53.4
32 37.8 11.0 65 60.1
36 45.2 11.8 80 66.3
40 51.2 11.8 80 72.4
Without grommet and cable clamp
If a cable clamp is required, see pages 82 and 84
Non-environment proof
Q
B
F
K
L
53
GT06AF/06F
straight plug
All dim ens i ons for re ference o nl y.
Inches
Shell
Size L
Max. Q
Max. Z
Nominal KK
Max. LL
Max.
10SL 2.165 .898 .220 .894 4.724
14S 2.362 1.150 .312 1.083 4.724
16S 2.756 1.260 .437 1.181 4.724
16 2.756 1.260 .437 1.181 4.921
18 2.953 1.437 .562 1.299 4.921
20 2.953 1.571 .625 1.476 4.921
22 2.953 1.697 .625 1.476 4.921
24 3.543 1.835 .750 1.705 4.921
28 3.543 2.102 .750 1.705 4.921
32 3.543 2.366 .937 2.035 4.921
36 3.937 2.610 1.250 2.283 5.315
40 4.921 2.850 1.375 2.579 5.709
Millimeters
Shell
Size L
Max. Q
Max. Z
Nominal KK
Max. LL
Max.
10SL 55 22.8 5.58 22.7 120
14S 60 29.2 7.92 27.5 120
16S 70 32.0 11.09 30.0 120
16 70 32.0 11.09 30.0 125
18 75 36.5 14.27 33.0 125
20 75 39.9 15.87 37.5 125
22 75 43.1 15.87 37.5 125
24 90 46.6 19.05 43.3 125
28 90 53.4 19.05 43.3 125
32 90 60.1 23.79 51.7 125
36 100 66.3 31.75 58.0 135
40 125 72.4 34.92 65.5 145
GT06AF
With a cable clamp
Wire sealing grommet not supplied
Non-environment proof
GT06F
With a wire sealing grommet and cable clamp
For use with individual wires
Environment proof
Q
ZKK
L
LL
54
GT06CF
straight plug
All dim ens i ons for re ference o nl y.
Inches
Shell
Size J
Approx. L
Approx. Q
Max. Z
Open Closed
10SL .551 2.752 .898 .312 .094
14S .732 2.898 1.150 .438 .230
16S .732 2.898 1.260 .531 .315
16 .653 3.216 1.260 .531 .315
18 .705 3.307 1.437 .625 .378
20 .705 3.311 1.571 .748 .445
22 .744 3.350 1.697 .748 .445
24 .689 3.484 1.835 .937 .610
28 .921 3.736 2.102 .937 .610
32 1.016 4.142 2.366 1.250 .921
36 1.031 4.390 2.610 1.378 .921
40 1.614 4.640 2.854 1.624 1.177
Millimeters
Shell
Size J
Approx. L
Approx. Q
Max. Z
Open Closed
10SL 14.0 69.6 22.8 7.93 2.38
14S 18.6 73.6 29.2 11.12 5.84
16S 18.6 73.6 32.0 13.48 8.00
16 16.6 81.7 32.0 13.48 8.00
18 17.9 84.0 36.5 15.87 9.60
20 17.9 84.1 39.9 19.00 11.30
22 18.9 85.1 43.1 19.00 11.30
24 17.5 88.5 46.6 23.80 15.50
28 23.4 94.9 53.4 23.80 15.50
32 25.8 105.2 60.1 31.75 23.40
36 26.2 111.5 66.3 35.00 23.40
40 41.0 111.5 72.5 41.25 29.90
With a cable clamp and seal
For use with jacketed cable
Enviro nment proof
Q
Z
J
Cable jacket
Strip length
L
OPEN
CLOSED
55
GT06CFGG
straight plug
With rubber covered coupling nut for extreme shock
applications
The shrouded coupling nut protects the plug from damage
Provides a superior gripping surface
Seal s the bayonet ramps
Includes a backshell
Mates with GT020RFSM (see page 44)
Environment proof
All dimensions for reference only.
Inches
Shell
Size J
Approx. L
Approx. Q
Max. S
Dia. Z
Open Closed
10SL .551 3.150 1.319 1.122 .312 .094
18 .701 3.346 1.929 1.713 .625 .378
20 .705 3.937 2.028 1.811 .748 .445
22 .705 3.937 2.224 1.988 .748 .445
24 .689 4.016 2.362 2.126 .937 .610
28 .921 4.291 2.638 2.402 .937 .610
32 1.016 5.315 2.992 2.661 1.250 .921
36 1.031 5.039 3.240 2.925 1.378 .921
40 1.614 5.315 3.465 3.150 1.624 1.177
Millimeters
Shell
Size J
Approx. L
Approx. Q
Max. S
Dia. Z
Open Closed
10SL 14.0 80 33.5 28.5 7.93 2.38
18 17.8 85 49.0 43.5 15.87 9.60
20 17.9 100 51.5 46.0 19.00 11.30
22 17.9 100 56.5 50.5 19.00 11.30
24 17.5 102 60.0 54.0 23.80 15.50
28 23.4 109 67.0 61.0 23.80 15.50
32 25.6 135 76.0 67.6 31.75 23.40
36 26.2 128 82.3 74.3 35.00 23.40
40 41.0 135 88.0 80.0 41.25 29.90
LQ
SZ
J
Cable jacket
Strip length
OPEN
CLOSED
56
GT06G
straight plug
With a wire sealing grommet
For use with individual wires
Includes a backshell for use with heat-shrink tubing
Enviro nment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size J
± .008 K
± .020 L
Max. Q
Max. Z
Min. BB
Max. JJ
± .008 KK
± .008
10SL .138 .461 1.969 .898 .303 .524 .610 .669
14S .138 .461 1.969 1.150 .417 .669 .752 .791
16S .138 .461 1.969 1.260 .531 .862 .941 .925
16 .138 .453 2.362 1.260 .531 .862 .941 .925
18 .138 .453 2.362 1.437 .575 .862 .941 1.043
20 .138 .500 2.559 1.571 .736 1.031 1.165 1.189
22 .138 .500 2.559 1.697 .819 1.031 1.165 1.323
24 .138 .500 2.559 1.835 .969 1.358 1.488 1.421
28 .138 .500 2.559 2.102 1.063 1.358 1.488 1.630
32 .138 .598 2.756 2.366 1.311 1.717 1.882 1.913
36 .138 .598 3.150 2.610 1.516 1.717 1.882 2.157
40 .138 .610 3.150 2.854 1.898 2.071 2.276 2.402
Millimeters
Shell
Size J
± 0.2 K
± 0.5 L
Max. Q
Max. Z
Min. BB
Max. JJ
± 0.2 KK
± 0.2
10SL 3.5 11.7 50 22.8 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 29.2 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 32.0 13.5 21.9 23.9 23.5
16 3.5 11.5 60 32.0 13.5 21.9 23.9 23.5
18 3.5 11.5 60 36.5 14.6 21.9 23.9 26.5
20 3.5 12.7 65 39.9 18.7 26.2 29.6 30.2
22 3.5 12.7 65 43.1 20.8 26.2 29.6 33.6
24 3.5 12.7 65 46.6 24.6 34.5 37.8 36.1
28 3.5 12.7 65 53.4 27.0 34.5 37.8 41.4
32 3.5 15.2 70 60.1 33.3 43.6 47.8 48.6
36 3.5 15.2 80 66.3 38.5 43.6 47.8 54.8
40 3.5 15.2 80 72.5 48.2 52.6 57.8 61.0
Q
BB JJ KKZ
J
K
L
57
GT06G2
straight plug
For use with individual wires and termination of heat shrink tubing
Wit h individu al wire seali ng grommet
Back shell includes free spinning adap ter
Enviro nment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size C
Min. D
Max. E
±.008 L
Max. M
±.020 Q
Max. R
±.007
10SL .303 .524 .610 1.969 .461 .898 .669
14S .417 .669 .752 1.969 .461 1.150 .791
16S .531 .862 .941 1.969 .461 1.299 .925
16 .531 .862 .941 2.362 .453 1.299 .925
18 .637 .862 .941 2.362 .453 1.437 1.043
20 .736 1.031 1.165 2.559 .500 1.571 1.189
22 .877 1.031 1.165 2.559 .500 1.697 1.323
24 .969 1.358 1.488 2.559 .500 1.835 1.421
28 1.094 1.358 1.488 2.559 .500 2.102 1.630
32 1.392 1.717 1.882 2.756 .598 2.366 1.913
36 1.539 1.717 1.882 3.150 .598 2.610 2.157
40 1.898 2.071 2.276 3.150 .610 2.850 2.402
Millimeters
Shell
Size C
Min. D
Max. E
±.008 L
Max. M
±.020 Q
Max. R
±.007
10SL 7.7 13.3 15.5 50.0 11.7 22.8 17.0
14S 10.6 17.0 19.1 50.0 11.7 29.2 20.1
16S 13.5 21.9 23.9 50.0 11.7 32.0 23.5
16 13.5 21.9 23.9 60.0 11.5 32.0 23.5
18 16.2 21.9 23.9 60.0 11.5 36.5 26.5
20 18.7 26.2 29.6 65.0 12.7 39.9 30.2
22 22.3 26.2 29.6 65.0 12.7 43.1 33.6
24 24.6 34.5 37.8 65.0 12.7 46.6 36.0
28 27.8 34.5 37.8 65.0 12.7 53.4 41.4
32 35.4 43.6 47.8 70.0 15.2 60.1 48.6
36 39.1 43.6 47.8 80.0 15.2 66.3 54.8
40 48.2 52.6 57.8 80.0 15.5 72.5 61.0
Q
ER
DC
L
.138±.008
M
58
GT06LC
straight plug
All dim ens i ons for re feren ce only. * For exampl e, t ypical part number woul d be:
GTC06LC28-8PA59
Inches
Shell
Size L
Ref. Q
Max.
Cabl e Range
AXX Part No.
Suffix* Min. Max.
10SL 3.000 .898 A16 .250 .375
14S 3.000 1.150 A54 .375 .500
16S 3.000 1.260 A10 .500 .625
16 3.250 1.260 A12 .625 .750
18 3.250 1.437 A42 .750 .875
20 3.250 1.571 A11 .875 1.000
22 3.250 1.697 A55 1.000 1.125
24 3.250 1.835 A14 1.125 1.250
28 3.600 2.102 A56 1.250 1.375
32 3.600 2.366 A74 1.375 1.500
36 3.600 2.610 A57 1.500 1.625
40 3.600 2.854 A58 1.625 1.750
Millimeters
Shell
Size L
Ref. Q
Max.
Cabl e Range
AXX Part No.
Suffix* Min. Max.
10SL 76.2 22.8 A16 6.3 9.5
14S 76.2 29.2 A54 9.5 12.7
16S 76.2 32.0 A10 12.7 15.8
16 82.5 32.0 A12 15.8 19.0
18 82.5 36.4 A42 19.0 22.2
20 82.5 39.9 A11 22.2 25.4
22 82.5 43.1 A55 25.4 28.5
24 82.5 46.6 A14 28.5 31.7
28 91.4 53.3 A56 31.7 34.9
32 91.4 60.0 A74 34.9 38.1
36 91.4 66.2 A57 38.1 41.2
40 91.4 72.4 A58 41.2 44.4
Includes a backshell with a basket weave strain relief cord grip
Enviro nment proof
Q
Cable Range
Min./Max.
L
59
GT06LCF/06LCFZ
straight plug
All dim ens i ons for re ference o nl y.
Inches
Shell
Size L
Approx. Q
Max. Z
Open Closed
10SL 3.811 .898 .312 .094
14S 3.843 1.150 .438 .230
16S 3.843 1.260 .531 .315
16 4.217 1.260 .531 .315
18 4.409 1.437 .625 .378
20 4.409 1.571 .748 .445
22 4.413 1.697 .748 .445
24 4.535 1.835 .937 .610
28 4.756 2.102 .937 .610
32 5.079 2.366 1.250 .921
36 5.327 2.610 1.378 .921
40 5.327 2.854 1.624 1.177
Millimeters
Shell
Size L
Approx. Q
Max. Z
Open Closed
10SL 96.8 22.8 7.93 2.38
14S 97.6 29.2 11.12 5.84
16S 97.6 32.0 13.48 8.00
16 107.1 32.0 13.48 8.00
18 112.0 36.5 15.87 9.60
20 112.0 39.9 19.00 11.30
22 112.1 43.1 19.00 11.30
24 115.2 46.6 23.80 15.50
28 120.8 53.4 23.80 15.50
32 129.0 60.1 31.75 23.40
36 135.3 66.3 35.00 23.40
40 135.3 72.5 41.25 29.90
GT06LCF
With cable clamp and seal
Long back s hell provides more working room
for jacketed cable
Enviro nment proof
GT06LCFZ
Same as GT06LCF except: Individual wire sealing
gromm et for added moisture prote ctio n
Environment proof
GT06LCF
With cable clamp and seal
Long back s hell provides more working room
for jacketed cable
Enviro nment proof
Q
L
ZOPEN
CLOSED
60
GT06LT
straight plug
All dimensions for reference only.
Inches
Shell
Size L
Max. Q
Max.
10SL
Dependent on Conduit
and Shell Combination
Consult Amphenol,
Sidney, NY for fur ther
information
.898
14S 1.150
16S 1.299
16 1.299
18 1.437
20 1.571
22 1.697
24 1.835
28 2.102
32 2.366
36 2.610
40 2.850
Millimeters
Shell
Size L
Max. Q
Max.
10SL
Dependent on Conduit
and Shell Combination
Consult Amphenol,
Sidney, NY for fur ther
information
22.81
14S 29.21
16S 32.99
16 32.99
18 36.50
20 39.90
22 43.10
24 46.61
28 53.39
32 60.10
36 66.29
40 72.39
Inches
C
Conduit
Size
3/8
1/2
3/4
1
1-1/4
1-1/2
2
For te rmination of metallic c ore con duit
Wit h individu al wire seali ng grommet
Enviro nment proof
L
Q
C
DIA. OF
CONDUIT
61
GT06PFC
straight plug
All dimensions for reference only.
Inches
Shell
Size C
Conduit Size L
Max. Q
Max.
10SL
Wide Variety
of Sizes
Consult
Amphenol,
Sidney, NY
for further
information
Dependent
on Conduit
and Shell
Combination
Consult
Amphenol,
Sidney, NY
for further
information
.898
14S 1.150
16S 1.299
16 1.299
18 1.437
20 1.571
22 1.697
24 1.835
28 2.102
32 2.366
36 2.610
40 2.850
Millimeters
Shell
Size C
Conduit Size L
Max. Q
Max.
10SL
Wide Variety
of Sizes
Consult
Amphenol,
Sidney, NY
for further
information
Dependent
on Conduit
and Shell
Combination
Consult
Amphenol,
Sidney, NY
for further
information
22.81
14S 29.21
16S 32.99
16 32.99
18 36.50
20 39.90
22 43.10
24 46.61
28 53.39
32 60.10
36 66.29
40 72.39
For termination of plastic flexible co rrugated cond u it
Wit h individu al wire seali ng grommet
Enviro nment proof
Q
L
C
DIA. OF CONDUIT
62
GT06PG
straight plug
Long adapter with internal PG thread
With wire sealing grommet
Enviro nment proof
All dimensions for reference only.
Additional sh el l size/ PG thread c om bi nat i ons available
Inches
Shell
Size PG*
Thread L
Ref. Q
Max.
10SL 7 2.873 .898
14S 9 2.904 1.150
16S 11 2.904 1.299
16 11 3.291 1.299
18 13.5 3.406 1.437
20 16 3.391 1.571
22 21 3.395 1.697
24 21 3.470 1.835
28 29 3.604 2.102
32 36 3.751 2.366
36 42 3.795 2.610
40 48 3.795 2.850
Millimeters
Shell
Size PG*
Thread L
Ref. Q
Max.
10SL 7 73.0 22.8
14S 9 73.8 29.2
16S 11 73.8 32.0
16 11 83.6 32.0
18 13.5 86.5 36.5
20 16 86.1 39.9
22 21 86.2 43.1
24 21 88.1 46.6
28 29 91.5 53.4
32 36 95.3 60.1
36 42 96.4 66.3
40 48 96.4 72.5
QL
PG THREAD
63
GT06PP/064PP
panel plug
All dim ens i ons for re ference o nl y.
Inches
Shell
Size L
Approx. Q
Max. Q1
Max. P
± .008 R
± .004 S
± .012
T
+ .004
.000
10SL 1.087 .898 .953 .110 .717 1.000 .126
14S 1.091 1.150 1.208 .126 .906 1.181 .126
16S 1.091 1.260 1.319 .126 .969 1.280 .126
16 1.469 1.260 1.319 .126 .969 1.280 .126
18 1.500 1.437 1.510 .157 1.063 1.378 .126
20 1.500 1.571 1.660 .157 1.157 1.496 .126
22 1.500 1.697 1.770 .157 1.252 1.614 .126
24 1.598 1.835 1.910 .157 1.374 1.752 .146
28 1.626 2.102 2.085 .157 1.563 2.000 .146
32 1.764 2.366 2.440 .157 1.752 2.244 .169
36 1.764 2.610 2.660 .157 1.937 2.500 .169
40 1.764 2.850 2.910 .157 2.185 2.752 .169
Shell
Size L
Approx. Q
Max. Q1
Max. P
±0.2 R
±0.1 S
±0.3
T
+0.1
–0.0
10SL 27.6 22.8 24.2 2.8 18.2 25.4 3.2
14S 27.7 29.2 30.6 3.2 23.0 30.0 3.2
16S 27.7 32.0 33.5 3.2 24.6 32.5 3.2
16 37.3 32.0 33.5 3.2 24.6 32.5 3.2
18 38.1 36.5 38.3 4.0 27.0 35.0 3.2
20 38.1 39.9 42.1 4.0 29.4 38.0 3.2
22 38.1 43.1 44.9 4.0 31.8 41.0 3.2
24 40.6 46.6 48.5 4.0 34.9 44.5 3.7
28 41.3 53.4 52.9 4.0 39.7 50.8 3.7
32 44.8 60.1 61.9 4.0 44.5 57.0 4.3
36 44.8 66.3 67.5 4.0 49.2 63.5 4.3
40 44.8 72.4 73.9 4.0 55.5 69.9 4.3
GT06PP
Square flange mounting with four through holes
Environment proof with proper panel sealing gasket
(see page 79)
GT064PP
Square flange mounting with four through holes
Environment proof with proper panel sealing gasket
(see page 79)
Includes a heavy duty coupling nut
S
R
SR
T
GT06PP
P
Q
L
SR
S
R
T
GT064PP
L
P
Q
1
64
GT06R
straight plug
With a wire sealing grommet
Includes a backshell for c onduit termination
Enviro nment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A F
Min. K
Min. L
Max. Q
Max.
10SL .6250-24UNEF .409 .374 1.969 .898
14S .7500-20UNEF .520 .374 1.969 1.150
16S .8750-20UNEF .638 .374 1.969 1.260
16 .8750-20UNEF .638 .374 2.362 1.260
18 1.0000-20UNEF .756 .374 2.362 1.437
20 1.1875-18UNEF .867 .374 2.362 1.571
22 1.1875-18UNEF .965 .374 2.362 1.697
24 1.4375-18UNEF 1.094 .374 2.560 1.835
28 1.4375-18UNEF 1.228 .374 2.560 2.102
32 1.7500-18UNS 1.488 .433 2.560 2.366
36 2.0000-18UNS 1.780 .465 3.150 2.610
40 2.2500-16UN 2.016 .465 3.150 2.850
Millimeters
Shell
Size F
Min. K
Min. L
Max. Q
Max.
10SL 10.4 9.5 50 22.8
14S 13.2 9.5 50 29.2
16S 16.2 9.5 50 32.0
16 16.2 9.5 60 32.0
18 19.2 9.5 60 36.5
20 22.0 9.5 60 39.9
22 24.5 9.5 60 43.1
24 27.8 9.5 65 46.6
28 31.2 9.5 65 53.4
32 37.8 11.0 65 60.1
36 45.2 11.8 80 66.3
40 51.2 11.8 80 72.4
Q
B
F
K
L
65
GT06RV
straight plug
All dimensions for reference only.
Inches
Shell
Size L
Max. Q
Max. KK
Max.
10SL 1.417 .898 .787
14S 1.437 1.150 .945
16S 1.437 1.260 1.024
16 1.929 1.260 1.024
18 1.929 1.437 1.161
20 1.969 1.571 1.299
22 1.969 1.697 1.417
24 2.008 1.835 1.543
28 2.008 2.102 1.811
32 2.087 2.366 2.028
36 2.106 2.610 2.283
40 2.126 2.850 2.539
Millimeters
Shell
Size L
Max. Q
Max. KK
Max.
10SL 36.0 22.8 20.0
14S 36.5 29.2 24.0
16S 36.5 32.0 26.0
16 49.0 32.0 26.0
18 49.0 36.5 29.5
20 50.0 39.9 33.0
22 50.0 43.1 36.0
24 51.0 46.6 40.0
28 51.0 53.4 46.0
32 53.0 60.1 51.5
36 53.5 66.3 58.0
40 54.0 72.4 64.5
With a wire sealing grommet
For use with individual wires
Enviro nment proof
KK
Q L
66
GT06SB
straight plug
For termination of shielded braid and heatshrink tube or boot.
Wit h individu al wire seali ng grommet
Enviro nment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size C
Min. D
Max. E
Max. F
Ref. L
Ref. Q
Max. R
Max.
10SL .303 .641 .775 .625 2.034 .898 .786
14S .417 .786 .873 .750 2.049 1.150 .944
16S .531 .905 1.025 .875 2.049 1.299 1.023
16 .531 .905 1.025 .875 2.505 1.299 1.023
18 .637 .965 1.147 1.000 2.552 1.437 1.160
20 .736 1.122 1.305 1.125 2.552 1.571 1.296
22 .819 1.196 1.373 1.250 2.418 1.697 1.416
24 .981 1.364 1.521 1.375 2.632 1.835 1.562
28 1.067 1.476 1.657 1.500 2.566 2.102 1.806
32 1.311 1.732 1.927 1.750 2.628 2.366 2.027
36 1.631 2.007 2.207 2.062 2.676 2.610 2.281
40 1.882 2.283 2.486 2.312 2.628 2.850 2.538
Millimeters
Shell
Size C
Min. D
Max. E
Max. F
Ref. L
Ref. Q
Max. R
Max.
10SL 7.7 16.3 19.7 15.9 51.7 22.8 20.0
14S 10.6 20.0 22.2 19.1 52.0 29.2 24.0
16S 13.5 23.0 26.0 22.2 52.0 32.0 26.0
16 13.5 23.0 26.0 22.2 63.6 32.0 26.0
18 16.2 24.5 29.1 25.4 64.8 36.5 29.5
20 18.7 28.5 33.1 28.6 64.8 39.9 32.9
22 20.8 30.4 34.9 31.8 61.4 43.1 36.0
24 24.9 34.6 38.6 34.9 66.8 46.6 39.7
28 27.1 37.5 42.5 38.1 65.2 53.4 45.9
32 33.3 44.0 48.9 44.5 66.8 60.1 51.5
36 41.4 51.0 56.1 52.4 68.0 66.3 57.9
40 47.8 58.0 63.1 58.7 66.8 72.5 64.5
Q
ER
D
C
L
F
.138 REF
67
GT06SBT
straight plug
For termination of shielded braid and heatshrink tube or boot
With wire sealing grommet
Enviro nment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size C
Min. D
Max. E
Max. F
Ref. L
Ref. Q
Max. R
Max.
10SL .303 .641 .775 .437 2.401 .898 .786
14S .417 .768 .873 .563 2.520 1.150 .944
16S .531 .905 1.025 .626 2.756 1.299 1.023
16 .531 .905 1.025 .626 3.150 1.299 1.023
18 .637 .965 1.147 .752 3.150 1.437 1.160
20 .736 1.122 1.305 .878 3.150 1.571 1.296
22 .819 1.196 1.373 1.000 3.150 1.697 1.416
24 .981 1.364 1.521 1.126 3.150 1.835 1.562
28 1.067 1.476 1.657 1.252 3.150 2.102 1.806
32 1.311 1.732 1.927 1.252 3.150 2.366 2.027
36 1.631 2.007 2.207 1.752 3.350 2.610 2.281
40 1.882 2.283 2.486 2.000 3.350 2.850 2.538
Millimeters
Shell
Size C
Min. D
Max. E
Max. F
Ref. L
Ref. Q
Max. R
Max.
10SL 7.7 16.3 19.7 11.1 61.0 22.8 20.0
14S 10.6 20.0 22.2 14.3 64.0 29.2 24.0
16S 13.5 23.0 26.0 15.9 71.0 32.0 26.0
16 13.5 23.0 26.0 15.9 80.0 32.0 26.0
18 16.2 24.5 29.1 19.1 80.0 36.5 29.5
20 18.7 28.5 33.1 22.3 80.0 39.9 32.9
22 20.8 30.4 34.9 25.4 80.0 43.1 36.0
24 24.9 34.6 38.6 28.6 80.0 46.6 39.7
28 27.1 37.5 42.5 31.8 80.0 53.4 45.9
32 33.3 44.0 48.9 31.8 80.0 60.1 51.5
36 41.4 51.0 56.1 44.5 85.1 66.3 57.9
40 47.8 58.0 63.1 50.8 85.1 72.5 64.5
Q
ER
D
C
L
F
.138 REF
68
GT065SL(*)
straight plug
All di m ensions for reference on l y. * A dd suffix 1 or 2 for des i red cable range.
Inches
Shell
Size L
Ref. Q
Max. Cable Range
(1)* (2)*
10SL 3.516 1.007 .11–.26 .07–.12
14S 3.628 1.259 .15–.32 .07–.24
16S 3.808 1.410 .19–.39 .11–.28
16 4.355 1.410 .19–.39 .11–.28
18 4.249 1.547 .23–.47 .19–.35
20 4.255 1.681 .39–.56 .27–.47
22 4.329 1.847 .51–.71 .35–.63
24 4.816 1.965 .51–.71 .35–.63
28 4.817 2.222 .70–.98 .51–.79
32 4.817 2.482 .86–1.26 .78–1.02
36 5.048 2.721 1.26–1.50 .98–1.22
40 4.978 2.953 1.45–1.75 1.14–1.38
Millimeters
Shell
Size L
Ref. Q
Max. Cable Range
(1)* (2)*
10SL 89.3 25.5 2.7–6.6 1.7–3.0
14S 92.1 31.9 3.8–8.1 1.7–6.0
16S 96.7 35.8 4.8–9.9 2.7–7.1
16 110.6 35.8 4.8–9.9 2.7–7.1
18 107.9 39.2 5.8–11.9 4.8–8.8
20 108.0 42.6 9.9–14.2 6.8–11.9
22 109.9 46.9 12.9–18.0 8.8–16.0
24 122.3 49.9 12.9–18.0 8.8–16.0
28 122.3 56.4 17.7–24.8 12.9–20.0
32 122.3 63.0 21.8–32.0 19.8–25.9
36 128.2 69.1 32.0–38.1 24.8–30.9
40 126.4 75.0 36.8–44.4 28.9–35.05
Includes a long heavy duty coupling nut
Includes a liquid tight strain relief to g rip and seal jacketed cable
Enviro nment proof
Q
Cable Range*
L
69
GT07R
jam nut receptacle
For rear panel single hole mounting
Panel seal O-ring included
Enviro nment proof
All dim ens i ons for re ference o nl y.
Inches
Shell
Size
B
Thread
Class 2A G
± .012
J
Wall Thickness M
± .012
N
+ .000
– .006 P
± .007 R
± .016 S
± .012Min. Max.
10SL .8750-20 UNEF .441 .094 .205 .965 .717 .157 1.062 1.252
14S 1.1250-18 UNEF .575 .094 .295 1.055 .969 .189 1.312 1.626
16S 1.2500-18 UNEF .618 .094 .295 1.055 1.079 .189 1.500 1.748
16 1.2500-18 UNEF .618 .094 .295 1.264 1.079 .189 1.500 1.748
18 1.3750-18 UNEF .661 .094 .354 1.327 1.213 .189 1.562 1.875
20 1.5000-18 UNEF .709 .094 .358 1.327 1.346 .189 1.750 2.000
22 1.6250-18 UNEF .795 .094 .358 1.327 1.472 .189 2.000 2.134
24 1.7500-18 UNEF .795 .094 .358 1.327 1.610 .189 2.000 2.252
28 2.0000-18 UNS .886 .094 .394 1.386 1.839 .220 2.188 2.500
32 2.2500-16 UN .972 .094 .394 1.386 2.102 .220 2.438 2.748
36 2.5000-16 UN 1.059 .094 .327 1.386 2.346 .220 2.812 3.000
40 2.7500-16 UN 1.165 .094 .327 1.386 2.579 .220 2.953 3.248
Millimeters
Shell
Size G
± 0.3
J
Wall Thickness M
± 0.3
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.4 S
± 0.3Min. Max.
10SL 11.2 2.4 5.2 24.5 18.2 4.0 27 31.8
14S 14.6 2.4 7.5 26.8 24.6 4.8 33 41.3
16S 15.7 2.4 7.5 26.8 27.4 4.8 38 44.4
16 15.7 2.4 7.5 32.1 27.4 4.8 38 44.4
18 16.8 2.4 9.0 33.7 30.8 4.8 40 47.6
20 18.0 2.4 9.1 33.7 34.2 4.8 44 50.8
22 20.2 2.4 9.1 33.7 37.4 4.8 51 54.2
24 20.2 2.4 9.1 33.7 40.9 4.8 51 57.2
28 22.5 2.4 10.0 35.2 46.7 5.6 56 63.5
32 24.7 2.4 10.0 35.2 53.4 5.6 62 69.8
36 26.9 2.4 8.3 35.2 59.6 5.6 71 76.2
40 29.6 2.4 8.3 35.2 65.5 5.6 75 82.5
G
S
S
G
R
N
M
P
BO-Ring
J
70
GT070
jam nut receptacle
For rear panel single hole mounting
Threaded rear for accessories
Enviro nment proof
All di mensi ons for re ferenc e onl y.
Inches
Shell
Size
B
Thread
Class 2A G
± .012
J
Wall Thickness L
± .010 M
± .012
N
+ .000
– .006 P
± .007 R
± .016 S
± .012
BB
Thread
Class 2AMin. Max.
10SL .8750-20 UNEF .441 .094 .205 1.425 .965 .717 .157 1.062 1.252 .6250-24 UNEF
14S 1.1250-18 UNEF .575 .094 .295 1.531 1.055 .969 .189 1.312 1.626 .7500-20 UNEF
16S 1.2500-18 UNEF .618 .094 .295 1.531 1.055 1.079 .189 1.500 1.748 .8750-20 UNEF
16 1.2500-18 UNEF .618 .094 .295 1.909 1.264 1.079 .189 1.500 1.748 .8750-20 UNEF
18 1.3750-18 UNEF .661 .094 .354 1.941 1.327 1.213 .189 1.562 1.875 1.0000-20 UNEF
20 1.5000-18 UNEF .709 .094 .358 1.941 1.327 1.346 .189 1.750 2.000 1.1250-18 UNEF
22 1.6250-18 UNEF .795 .094 .358 1.941 1.327 1.472 .189 2.000 2.134 1.2500-18 UNEF
24 1.7500-18 UNEF .795 .094 .358 1.953 1.327 1.610 .189 2.000 2.252 1.3750-18 UNEF
28 2.0000-18 UNS .886 .094 .394 2.043 1.386 1.839 .220 2.188 2.500 1.6250-18 UNEF
32 2.2500-16 UN .972 .094 .394 2.043 1.386 2.102 .220 2.438 2.748 1.8750-16 UN
36 2.5000-16 UN 1.059 .094 .327 2.043 1.386 2.346 .220 2.812 3.000 2.0625-16 UN
40 2.7500-16 UN 1.165 .094 .327 2.043 1.386 2.579 .220 2.953 3.248 2.3125-16 UN
Millimeters
Shell
Size G
± 0.3
J
W al l Thi c kne ss L
± 0.3 M
± 0.3
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.4 S
± 0.3Min. Max.
10SL 11.2 2.4 5.2 36.2 24.5 18.2 4.0 27 31.8
14S 14.6 2.4 7.5 38.9 26.8 24.6 4.8 33 41.3
16S 15.7 2.4 7.5 38.9 26.8 27.4 4.8 38 44.4
16 15.7 2.4 7.5 48.5 32.1 27.4 4.8 38 44.4
18 16.8 2.4 9.0 49.3 33.7 30.8 4.8 40 47.6
20 18.0 2.4 9.1 49.3 33.7 34.2 4.8 44 50.8
22 20.2 2.4 9.1 49.3 33.7 37.4 4.8 51 54.2
24 20.2 2.4 9.1 49.6 33.7 40.9 4.8 51 57.2
28 22.5 2.4 10.0 51.9 35.2 46.7 5.6 56 63.5
32 24.7 2.4 10.0 51.9 35.2 53.4 5.6 62 69.8
36 26.9 2.4 8.3 51.9 35.2 59.6 5.6 71 76.2
40 29.6 2.4 8.3 51.9 35.2 65.5 5.6 75 82.5
N
M
P
BO-Ring
BB
L
J
G
S
S
G
R
71
GT08A
90° angle p lug
All dim ens i ons for re ference o nl y.
Inches
Shell
Size
B
Thread
Class 2A F
Max. J
Min. K
Max. L
Max. Q
Max.
10SL .6250-24UNEF .337 .370 1.181 1.772 .898
14S .7500-20UNEF .462 .370 1.181 1.850 1.150
16S .8750-20UNEF .587 .370 1.181 1.890 1.299
16 .8750-20UNEF .587 .370 1.181 2.244 1.299
18 1.0000-20UNEF .685 .370 1.378 2.283 1.437
20 1.1875-18UNEF .810 .370 1.378 2.402 1.571
22 1.1875-18UNEF .915 .370 1.378 2.402 1.697
24 1.4375-18UNEF 1.025 .370 1.575 2.598 1.835
28 1.4375-18UNEF 1.139 .370 1.575 2.598 2.102
32 1.7500-18UNS 1.447 .433 1.772 2.835 2.366
36 2.0000-18UNS 1.687 .496 1.969 2.953 2.610
40 2.2500-16UN 1.923 .496 2.165 3.071 2.850
Millimeters
Shell
Size F
Max. J
Min. K
Max. L
Max. Q
Max.
10SL 8.5 9.4 30 45 22.8
14S 11.7 9.4 30 47 29.2
16S 14.9 9.4 30 48 33.0
16 14.9 9.4 30 57 33.0
18 17.4 9.4 35 58 36.5
20 20.5 9.4 35 61 39.9
22 23.2 9.4 35 61 43.1
24 26.0 9.4 40 66 46.6
28 28.9 9.4 40 66 53.4
32 36.7 11.0 45 72 60.1
36 42.8 12.6 50 75 66.3
40 48.8 12.6 55 78 72.4
Without a wire sealing gromm et or clamp
Non-environment proof
If a cable clamp is required, see pages 82 and 84
Q
K
J
L
F
B
72
GT08AF/08F
90° angle plug
GT08F
With a wire sealing gromm et and cable clamp
For use with individual wires
Environment proof
GT08AF
With a cable clamp
Wire sealing grommet not included
Non-environment proof
All di m ensions for refer ence on l y.
Inches
Shell
Size K
Max. L
Max. Q
Max. Z
Max. KK
Max. LL
Max.
10SL 1.654 1.772 .898 .220 .894 3.937
14S 1.654 1.850 1.150 .312 1.083 3.937
16S 1.772 1.890 1.299 .437 1.181 3.937
16 1.772 2.244 1.299 .437 1.181 3.937
18 2.087 2.283 1.437 .562 1.299 3.937
20 2.087 2.402 1.571 .625 1.476 3.937
22 2.087 2.402 1.697 .625 1.476 3.937
24 2.283 2.598 1.835 .750 1.705 3.937
28 2.283 2.598 2.102 .750 1.705 3.937
32 2.598 2.835 2.366 .937 2.061 4.331
36 2.717 2.953 2.610 1.250 2.283 4.331
40 3.740 3.071 2.850 1.375 2.579 5.512
Millimeters
Shell
Size K
Max. L
Max. Q
Max. Z
Max. KK
Max. LL
Max.
10SL 42 45 22.8 5.58 22.7 100
14S 42 47 29.2 7.92 27.5 100
16S 45 48 33.0 11.09 30.0 100
16 45 57 33.0 11.09 30.0 100
18 53 58 36.5 14.27 33.0 100
20 53 61 39.9 15.87 37.5 100
22 53 61 43.1 15.87 37.5 100
24 58 66 46.6 19.05 43.3 100
28 58 66 53.4 19.05 43.3 100
32 66 72 60.1 23.79 51.7 110
36 69 75 66.3 31.75 58.0 110
40 95 78 72.4 34.92 65.5 140
Q
L
ZKK
K
LL
73
GT08CFGG
90° angle p lug
Rubber covered coupling nut provides superior gripping surface
and seals beyond ramps
Includes clamp to grip and seal jacketed cable
Mates with GT020RFSM (see page 44)
Enviro nment proof
All dim ens i ons for re ference o nl y.
* 14s, 16s and 16 shell sizes ar e avail abl e upon reque st .
Inches
Shell
Size* K
Max. L
Max. Q
Dia. S
Dia. ZKK
± .008Open Closed
10SL 2.402 1.929 1.319 1.122 .312 .094 .890
18 2.677 2.520 1.929 1.713 .625 .378 1.220
20 2.677 2.638 2.028 1.811 .748 .445 1.469
22 2.677 2.638 2.205 1.988 .748 .445 1.469
24 2.992 2.874 2.362 2.126 .937 .610 1.654
28 2.992 2.874 2.638 2.402 .937 .610 1.654
32 3.425 3.071 2.992 2.661 1.250 .921 2.126
36 3.858 3.189 3.240 2.925 1.378 .921 2.248
40 4.055 3.307 3.465 3.150 1.624 1.177 2.500
Millimeters
Shell
Size* K
Max. L
Max. Q
Dia. S
Dia. ZKK
± 0.2Open Closed
10SL 61 49 33.5 28.5 7.93 2.38 22.6
18 68 64 49.0 43.5 15.87 9.60 31.0
20 68 67 51.5 46.0 19.00 11.30 37.3
22 68 67 56.0 50.5 19.00 11.30 37.3
24 76 73 60.0 54.0 23.80 15.50 42.0
28 76 73 67.0 61.0 23.80 15.50 42.0
32 87 78 76.0 67.6 31.75 23.40 54.0
36 98 81 82.3 74.3 35.00 23.40 57.1
40 103 84 88.0 80.0 41.25 29.90 63.5
ZOPEN
CLOSED
KK
Q
S
K
L
74
GT08LT
90° angle plug
All dim ens i ons for re ference o nl y.
Inches
Shell
Size K
Max. L
Max. Q
Max.
10SL
Dependent on Conduit
and Shell Combination
Consult Amphenol,
Sidney, NY for fur ther
information
1.772 .898
14S 1.850 1.150
16S 1.890 1.299
16 2.244 1.299
18 2.283 1.437
20 2.402 1.571
22 2.402 1.697
24 2.598 1.835
28 2.598 2.102
32 2.835 2.366
36 2.953 2.610
40 3.071 2.850
Millimeters
Shell
Size K
Max. L
Max. Q
Max.
10SL
Dependent on Conduit
and Shell Combination
Consult Amphenol,
Sidney, NY for fur ther
information
45.01 22.81
14S 46.99 29.21
16S 48.01 32.99
16 57.00 32.99
18 57.99 36.50
20 61.01 39.90
22 61.01 43.10
24 65.99 46.61
28 65.99 53.39
32 72.01 60.10
36 75.01 66.29
40 78.00 72.39
For te rmination of metallic c ore con duit
Wit h individu al wire seali ng grommet
Enviro nment proof
Inches
C
Conduit
Size
3/8
1/2
3/4
1
1-1/4
1-1/2
2
Millimeters
C
Conduit
Size
9.53
12.70
19.05
25.40
31.75
38.10
50.80
QL
K
C
DIA. OF
CONDUIT
75
QL
C
DIA. OF
CONDUIT
K
GT08PFC
90° angle p lug
All dim ens i ons for re ference o nl y.
Inches
Shell
Size C
Conduit Size K
Max. L
Max. Q
Max.
10SL
Wide Variety
of Sizes
Consult
Amphenol,
Sidney, NY
for further
information
Dependent
on Conduit
and Shell
Combination
Consult
Amphenol,
Sidney, NY
for further
information
1.772 .898
14S 1.850 1.150
16S 1.890 1.299
16 2.244 1.299
18 2.283 1.437
20 2.402 1.571
22 2.402 1.697
24 2.598 1.835
28 2.598 2.102
32 2.835 2.366
36 2.953 2.610
40 3.071 2.850
Millimeters
Shell
Size C
Conduit Size K
Max. L
Max. Q
Max.
10SL
Wide Variety
of Sizes
Consult
Amphenol,
Sidney, NY
for further
information
Dependent
on Conduit
and Shell
Combination
Consult
Amphenol,
Sidney, NY
for further
information
45.01 22.81
14S 46.99 29.21
16S 48.01 32.99
16 57.00 32.99
18 57.99 36.50
20 61.01 39.90
22 61.01 43.10
24 65.99 46.61
28 65.99 53.39
32 72.01 60.10
36 75.01 66.29
40 78.00 72.39
For termination of plastic flexible co rrugated cond u it
Wit h individu al wire seali ng grommet
Enviro nment proof
76
GT08R
90° angle plug
All dim ens i ons for re ference o nl y.
Inches
Shell
Size
B
Thread
Class 2A F
Max. J
Min. K
Max. L
Max. Q
Max.
10SL .6250-24UNEF .337 .370 1.181 1.772 .898
14S .7500-20UNEF .462 .370 1.181 1.850 1.150
16S .8750-20UNEF .587 .370 1.181 1.890 1.299
16 .8750-20UNEF .587 .370 1.181 2.244 1.299
18 1.0000-20UNEF .685 .370 1.378 2.283 1.437
20 1.1875-18UNEF .810 .370 1.378 2.402 1.571
22 1.1875-18UNEF .915 .370 1.378 2.402 1.697
24 1.4375-18UNEF 1.025 .370 1.575 2.598 1.835
28 1.4375-18UNEF 1.139 .370 1.575 2.598 2.102
32 1.7500-18UNS 1.447 .433 1.772 2.835 2.366
36 2.0000-18UNS 1.687 .496 1.969 2.953 2.610
40 2.2500-16UN 1.923 .496 2.165 3.071 2.850
Millimeters
Shell
Size F
Max. J
Min. K
Max. L
Max. Q
Max.
10SL 8.5 9.4 30 45 22.8
14S 11.7 9.4 30 47 29.2
16S 14.9 9.4 30 48 33.0
16 14.9 9.4 30 57 33.0
18 17.4 9.4 35 58 36.5
20 20.5 9.4 35 61 39.9
22 23.2 9.4 35 61 43.1
24 26.0 9.4 40 66 46.6
28 28.9 9.4 40 66 53.4
32 36.7 11.0 45 72 60.1
36 42.8 12.6 50 75 66.3
40 48.8 12.6 55 78 72.4
With a wire sealing gromm et for conduit termination
For use with individual wires
Enviro nment proof
Q
K
J
L
F
B
77
GT05
dummy recepta cle
Square flange
Four through mounting holes
Stows cable plugs when not in use
All dimensions for reference only.
Inches
Shell
Size
M
+ .016
– .000
N
+ .000
– .006 P
± .008 R
± .004 S
± .012
T
+ .004
– .000
10SL .559 .717 .110 .717 1.000 .126
14S .559 .969 .126 .906 1.181 .126
16S .559 1.079 .126 .969 1.280 .126
16 .748 1.079 .126 .969 1.280 .126
18 .748 1.213 .157 1.063 1.378 .126
20 .748 1.346 .157 1.157 1.496 .126
22 .748 1.472 .157 1.252 1.614 .126
24 .811 1.610 .157 1.374 1.752 .146
28 .811 1.839 .157 1.563 2.000 .146
32 .874 2.102 .157 1.752 2.244 .169
36 .874 2.346 .157 1.937 2.500 .169
40 .874 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15 P
± 0.2 R
± 0.1 S
± 0.3
T
+ 0.1
– 0.0
10SL 14.2 18.2 2.8 18.2 25.4 3.2
14S 14.2 24.6 3.2 23.0 30.0 3.2
16S 14.2 27.4 3.2 24.6 32.5 3.2
16 19.0 27.4 3.2 24.6 32.5 3.2
18 19.0 30.8 4.0 27.0 35.0 3.2
20 19.0 34.2 4.0 29.4 38.0 3.2
22 19.0 37.4 4.0 31.8 41.0 3.2
24 20.6 40.9 4.0 34.9 44.5 3.7
28 20.6 46.7 4.0 39.7 50.8 3.7
32 22.2 53.4 4.0 44.5 57.0 4.3
36 22.2 59.6 4.0 49.2 63.5 4.3
40 22.2 65.5 4.0 55.5 69.9 4.3
R
RS
S
T
N
MP
78
GTTB
thru-bul kh ead recept acles
All dim ens i ons for re ference o nl y.
Inches
Shell
Size L
Max.
M
+ .016
.000
N
+ .000
.006 P
± .008 R
± .004 S
± .012
T
+ .004
.000
10SL 1.488 .717 .717 .110 .717 1.000 .126
14S 1.488 .717 .969 .126 .906 1.181 .126
16S 1.488 .717 1.079 .126 .969 1.280 .126
16 2.049 .846 1.079 .126 .969 1.280 .126
18 2.049 .907 1.213 .157 1.063 1.378 .126
20 2.049 .907 1.346 .157 1.157 1.496 .126
22 2.049 .907 1.472 .157 1.252 1.614 .126
24 2.049 .907 1.610 .157 1.374 1.752 .146
28 2.049 .947 1.839 .157 1.563 2.000 .146
32 2.049 .947 2.102 .157 1.752 2.244 .169
36 2.049 .947 2.346 .157 1.937 2.500 .169
40 2.049 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size L
Max.
M
+0.4
–0.0
N
+0.00
–0.15 P
±0.2 R
±0.1 S
±0.3
T
+ .004
.000
10SL 37.7 18.2 18.2 2.8 18.2 25.4 3.2
14S 37.7 18.2 24.6 3.2 23.0 30.0 3.2
16S 37.7 18.2 27.4 3.2 24.6 32.5 3.2
16 52.0 21.5 27.4 3.2 24.6 32.5 3.2
18 52.0 23.0 30.8 4.0 27.0 35.0 3.2
20 52.0 23.0 34.2 4.0 29.4 38.0 3.2
22 52.0 23.0 37.4 4.0 31.8 41.0 3.2
24 52.0 23.0 40.9 4.0 34.9 44.5 3.7
28 52.0 24.0 46.7 4.0 39.7 50.8 3.7
32 52.0 24.0 53.4 4.0 44.5 57.0 4.3
36 52.0 24.0 59.6 4.0 49.2 63.5 4.3
40 52.0 24.0 65.5 4.0 55.5 69.9 4.3
Accepts mating plug on both sides
Four through mounting holes
R
RS
S
T
N N
PM
L
79
GT Connectors – access or ies
10-40450 , 10-36675, 10-580649 se aling gaskets
PLAIN FLAT GASKET
The Amphen ol® pl ain f lat g asket o f sy nthet ic r ubb er m ater ial
is provided to take complete advantage of waterproof and
pressure sealing features. It is for use with the flange
mou nt e d rec epta cl e.
SHIE LDING GASKET
This flat gasket is provided to give the maximum in connector
performance. Its special feature is in providing the maximum
rad io s hie ldin g un de r d iffic ult c on d i ti on s of hi gh r e ce iver s en-
sitivity and low signal strength while retaining the sealing
characteristics of the plain gasket. This gasket is for use with
the flan ge mounting receptacle.
LOW TEMPERATURE GASKET
This gasket is provided for applications where the major
requirement is r esistance to the injurious effects of extremely
low temperature. Even at temperatures as low as –67°F this
gas ket re tain s it s res ili ency and will seal a pr essur e di fferen -
tia l of 30 psi .
Additional versions of gaskets are available including low
smoke zero halogen, and also high temperature and conduc-
tive types. Consult Amphenol lndustrial Operations, Sidney
NY, for further information.
Installation Dimensions
MS
Shell
Size A
± .010
Front Panel
Versions
B
+ .016
.000
Rear Panel
Version
B
+ .016
.000
C
+ .016
–.000 D
± .010
10SL .719 .625 .724 1.000 .172
14S .906 .875 .976 1.188 .172
16S .969 1.000 1.087 1.281 .172
16 .969 1.000 1.087 1.281 .172
18 1.063 1.125 1.220 1.375 .203
20 1.156 1.250 1.354 1.500 .203
22 1.250 1.375 1.480 1.625 .203
24 1.375 1.500 1.618 1.750 .203
28 1.563 1.750 1.846 2.000 .203
32 1.750 2.000 2.110 2.250 .219
36 1.938 2.188 2.354 2.500 .219
40 2.188 2.438 2.587 2.750 .219
Installation Dimensions
MS
Shell
Size A
±0.2
Front Panel
Versions
B
+0.4
–0.0
Rear Panel
Version
B
+0.4
–0.0
C
+0.4
–0.0 D
±0.2
10SL 18.2 15.9 18.4 25.4 4.36
14S 23.0 22.2 24.8 30.2 4.36
16S 24.6 25.4 27.6 32.5 4.36
16 24.6 25.4 27.6 32.5 4.36
18 27.0 28.57 31.0 35.0 5.15
20 29.4 31.75 34.4 38.1 5.15
22 31.8 34.9 37.6 41.2 5.15
24 34.9 38.1 41.1 44.5 5.15
28 39.7 44.45 46.9 50.8 5.15
32 44.5 50.8 53.6 57.2 5.56
36 49.2 55.57 59.8 63.5 5.56
40 55.6 61.92 65.7 69.9 5.56
Ord er Da ta for
Front Panel Mount Gaskets
Front Panel
Plain Version Front Panel
Shielding Version
Front Panel
Low Temperature
Version
Front Panel
Low Smoke ZH
Version
10-40450-10 10-40450-10S 10-36675-10 LS-40450-10
10-40450-14 10-40450-14S 10-36675-14 LS-40450-14
10-40450-16 10-40450-16S 10-36675-16 LS-40450-16
10-40450-18 10-40450-18S 10-36675-18 LS-40450-18
10-40450-20 10-40450-20S 10-36675-20 LS-40450-20
10-40450-22 10-40450-22S 10-36675-22 LS-40450-22
10-40450-24 10-40450-24S 10-36675-24 LS-40450-24
10-40450-28 10-40450-28S 10-36675-28 LS-40450-26
10-40450-32 10-40450-32S 10-36675-32 LS-40450-32
10-40450-36 10-40450-36S 10-36675-36 LS-40450-36
10-40450-40 10-40450-40S 10-36675-40 LS-40450-40
Order Data for
Rear Panel Mount Gaskets
Rear Panel
Plain Version
Rear Panel
Low Smoke ZH
Version
10-580649-11 LS-580649-11
10-580649-14 LS-580649-14
10-580649-16 LS-580649-16
10-580649-18 LS-580649-18
10-580649-20 LS-580649-20
10-580649-22 LS-580649-22
10-580649-24 LS-580649-24
10-580649-26 LS-580649-26
10-580649-32 LS-580649-32
10-580649-36 LS-580649-36
10-580649-40 LS-580649-40
C
A
C
A
BD
4 HOLES
.031± .010
.08 ± 0.3 mm
.020 ± .004
0.5 ± 0.1 mm
SHIELDING
.031 ± .010
0.8 ± 0.3 mm
LOW
TEMPERATURE
80
GT Connectors – access or ies
receptacle protection caps
* To compl et e order number, add sh el l size and s uffix num ber. For
example, shell size 11 with olive drab cadmium plate would be
10-580902-113.
All dimensions for reference only.
Inches
Shell
Size
D
+ .020
– .000 L
Max. N
Max. LL
Approx.
11 .173 .700 .905 5.000
14 .173 .700 1.181 5.000
16 .173 .700 1.280 5.000
17 .173 .900 1.280 5.000
18 .173 .900 1.457 5.000
20 .173 .900 1.594 5.000
22 .173 .900 1.713 5.000
24 .173 .900 1.850 5.000
28 .220 .900 2.126 7.480
32 .261 .900 2.382 7.480
36 .261 .900 2.638 7.480
40 .261 .900 2.874 7.480
Millimeters
Shell
Size
D
+ 0.5
– 0.0 L
Max. N
Max. LL
Approx.
11 4.4 17.8 23.0 127
14 4.4 17.8 30.0 127
16 4.4 17.8 32.5 127
17 4.4 22.9 32.5 127
18 4.4 22.9 37.0 127
20 4.4 22.9 40.5 127
22 4.4 22.9 43.5 127
24 4.4 22.9 47.0 127
28 5.6 22.9 54.0 190
32 5.6 22.9 60.5 190
36 5.6 22.9 67.0 175
40 5.6 22.9 73.0 190
Finish Suffix
Black anodize -XXZ
Olive drab cadmium plate -XX3
Olive drab cadmium nickel base -XX9
Electroless nickel -XXG
Green zinc cobalt -X XU
Black zinc cobalt -XXY
Protective metal caps which seal the front of receptacles
Includes a chain for retention of the cap at the required
location
For receptacles: GT00, 01, 02, 020, 030, 070
* 10-580902-XXX
D
LL
L
N
81
GT Connectors – access or ies
plug protection caps
Protective metal caps which seal the front of plugs
Includes a chain for retention of the cap at the required
location
For plugs: GT06, 08
* To co m pl ete or der number, add shel l size and s uf fix number. For
example, shell size 11 with olive drab cadmium plate would be
10-580903-113.
All dimensions for reference only.
Inches
Shell
Size
D
+ .020
– .000 L
Max. N
Max. LL
Approx.
11 .157 .945 .807 5.000
14 .157 .945 1.059 5.000
16 .157 .945 1.169 5.000
17 .157 .945 1.169 5.000
18 .157 .945 1.303 5.000
20 .189 1.260 1.437 5.520
22 .189 1.260 1.563 5.520
24 .189 1.260 1.701 5.520
28 .220 1.260 1.929 7.480
32 .261 1.260 2.193 7.480
36 .261 1.260 2.437 7.480
40 .261 1.260 2.665 7.480
Millimeters
Shell
Size
D
+ 0.5
– 0.0 L
Max. N
Max. LL
Approx.
11 4.0 24 20.5 127
14 4.0 24 26.9 127
16 4.0 24 29.7 127
17 4.0 24 29.7 127
18 4.0 24 33.1 127
20 4.8 32 36.5 140
22 4.8 32 39.7 140
24 4.8 32 43.2 140
28 4.8 32 49.0 190
32 5.6 32 55.7 190
36 5.6 32 61.9 190
40 5.6 32 67.7 190
Finish Suffix
Black anodize -XXZ
Olive drab cadmium plate -XX3
Olive drab cadmium nickel base -XX9
Electroless nickel -XXG
Green zinc cobalt -X XU
Black zinc cobalt -XXY
* 10-580903-XXX
D
LL
N
L
82
GT Connectors – access or ies
MS3057-A style cable clamp
All di m ensions for refer ence on l y.
Inches
Part
Number Used with
Shell Size Used with
Bushing B D G F
V
Thread
Class 2B
97-3057-1004 10SL MS3420-4 .315 .395 .812 .866 .6250-24 UNEF
97-3057-1007 14S MS3420-6 .442 .395 .875 1.063 .7500-20 UNEF
97-3057-1008 16 - 16S MS3420-8 .568 .395 .945 1.145 .8750-20 UNEF
97-3057-1010 18 MS3420-10 .633 .395 .945 1.244 1.0000-20 UNEF
97-3057-1012 20 - 22 MS3420-12 .758 .395 .945 1.475 1.1875-18 UNEF
97-3057-1016 24 - 28 MS3420-16 .948 .395 1.031 1.700 1.4375-18 UNEF
97-3057-1020 32 MS3420-20 1.256 .460 1.094 2.055 1.7500-18 UNS
97-3057-1024 36 MS3420-24 1.380 .520 1.157 2.265 2.0000-18 UNS
10-824810-028 40 MS3420-28 1.625 .520 1.685 2.683 2.2500-16 UN
Millimeters
Part
Number Used with
Shell Size Used with
Bushing B D G F
97-3057-1004 10SL MS3420-4 8.0 10.0 20.6 22
97-3057-1007 14S MS3420-6 11.0 10.0 22.2 27
97-3057-1008 16 - 16S MS3420-8 14.4 10.0 24.0 29
97-3057-1010 18 MS3420-10 16.1 10.0 24.0 32
97-3057-1012 20 - 22 MS3420-12 19.2 10.0 24.0 37
97-3057-1016 24 - 28 MS3420-16 24.1 10.0 26.2 43
97-3057-1020 32 MS3420-20 31.9 11.7 27.8 52
97-3057-1024 36 MS3420-24 35.0 13.2 29.4 58
10-824810-028 40 MS3420-28 41.3 13.2 42.8 68
Concentric cable clamps, insure strain relief and central
location of the cable
Can be used with bushing MS3420
B
Q
F
E
V
G
D
83
GT Connectors – access or ies
MS3420 bu shing
All dim ens i ons for re ference o nl y.
Inches
Part
Number Used with
Cable Clamp A B C D
MS3420-3 M85049/41-3A .130 .210 .379 2.875
MS3420-4 M85049/41-4A .220 .302 .505 2.750
MS3420-6 M85049/41-6A .312 .427 .619 2.625
MS3420-8 M85049/41-8A .437 .552 .744 2.500
MS3420-10 M85049/41-10A .562 .615 .889 2.375
MS3420-12 M85049/41-12A .625 .740 1.084 2.250
MS3420-16 M85049/41-16A .750 .927 1.314 2.125
MS3420-20 M85049/41-20A .937 1.240 1.598 2.000
MS3420-24 M85049/41-24A 1.250 1.365 1.847 1.875
MS3420-28 M85049/41-28A 1.375 1.614 2.085 1.750
Millimeters
Part
Number Used with
Cable Clamp A B C D
MS3420-3 M85049/41-3A 3.30 5.3 9.60 73.0
MS3420-4 M85049/41-4A 5.58 7.7 12.80 69.8
MS3420-6 M85049/41-6A 7.92 10.8 15.70 66.8
MS3420-8 M85049/41-8A 11.09 14.0 18.90 63.5
MS3420-10 M85049/41-10A 14.27 15.6 22.58 60.3
MS3420-12 M85049/41-12A 15.87 18.8 27.50 57.1
MS3420-16 M85049/41-16A 19.05 23.5 33.40 53.9
MS3420-20 M85049/41-20A 23.79 31.5 40.60 50.8
MS3420-24 M85049/41-24A 31.75 34.7 46.90 47.6
MS3420-28 M85049/41-28A 34.92 41.0 52.90 44.4
Bushing of synthetic rubber to be used with cable clamps
for protection of the cable or wires
Can be telescoped for smaller cable diameters
A
C
D
1.6mm
.062 in.
B
84
GT Connectors – access or ies
MS3057-C style (10-350349) cable clamp
Part
Number Used wi th
Shell Size
A Thread
Class 2B
in inches
V Thread
Class 2A
in inches U sed wi th
Bushing
Bushing Opening
Inches B u sing Opening
Millimeters
Open Closed Open Closed
10-350349-123 10SL .6250-24 UNEF 6-32 UNC MS3420-4A .219 . 010 5.56 0.25
10-350349-143 14S .7500-20 UNEF 6-32 UNC MS3420-6A
MS3420-4A .312
.219 .114
.020 7.93
5.56 2.89
0.50
10-350349- 163 16 & 16S .87 50-20 UNEF 6-32 UNC MS3420-8A
MS3420-6A .437
.312 .220
.085 11.10
7.93 5.60
2.15
10-350349- 183 18 1. 0000-20 UNEF 6-32 UNC MS3420-10A
MS3420-6A .437
.312 .197
.085 11.10
7.93 5.00
2.15
10-350349- 203 20 & 22 1.1875-18 U NEF 8-32 UNC MS3420-12A
MS3420-8A .541
.437 .270
.177 13.74
11.10 6.85
4.50
10-350349- 243 24 & 28 1.4375-18 U NEF 8-32 UNC MS3420-16A
MS3420-12A
MS3420-8A
.748
.541
.437
.429
.260
.186
19.00
13.74
11.10
10.90
6.60
4.72
10-350349- 323 32 1. 7500-18 U NS .250-20 UN C MS3420-20A
MS3420-16A
MS3420-12A
.937
.748
.541
.620
.441
.273
23.80
19.00
13.74
15.74
11.20
6.93
10-350349- 363 36 2. 0000-18 U NS .250-20 UN C MS3420-24A
MS3420-20A
MS3420-16A
1.122
.937
.748
.681
.504
.358
28.50
23.80
19.00
17.30
12.80
9.10
10-350349- 403 40 2. 2500-16 U N .250-20 UNC MS3420-28A
MS3420-20A
MS3420-16A
1.250
.937
.748
.815
512
368
31.75
23.80
19.00
20.70
13.00
9.34
All dimensions for reference only.
Inches
Part
Number U sed with
Shell Size
BE
± .016 F
± .008
G
+ .020
– .0 00Open Closed
10-350349-123 10SL .312 .094 .748 .890 1.272
10-350349-143 14S .438 .230 .874 1.016 1.272
10-350349-1 63 16 & 16S .531 .315 1.000 1. 106 1.27 2
10-350349-183 18 .625 .378 1.122 1.220 1.390
10-350349-2 03 20 & 22 .748 .4 45 1.311 1.469 1. 406
10-350349-2 43 24 &28 .9 37 .610 1.559 1. 654 1.516
10-350349-323 32 1.250 .921 1.874 2.126 1.764
10-350349-363 36 1.378 .921 2.122 2.248 2.031
10-350349-403 40 1.624 1.177 2.374 2.500 2.031
Millimeters
BE
± 0.4 F
± 0. 2
G
+ 0.5
– 0.0Open Closed
7.93 2.38 19.0 22.6 32.3
11.12 5.84 22.2 25.8 32.3
13.48 8.00 25.4 28.1 32.3
15.87 9.60 28.5 31.0 35.3
19.00 11.30 33.3 37.3 35.7
23.80 15.50 39.6 42.0 38.5
31.75 23.40 47.6 54.0 44.8
35.00 23.40 53.9 57.1 51.6
41.25 29.90 60.3 63.5 51.6
Waterproof clamp for jacketed cables
Provides mecha nical strain relief plus concentric clamping over a
wide range of cable sizes
A neoprene* gland seal ensures a waterproof seal on the cable jacket
* Other materials available
F
V
E
B
GA
To reduce diameter B, use
rubber brushing MS3420A
85
GT – accessories
rear mounting data, panel cut-out dimensions,
sealing plugs, sealing ranges
REAR MOUNTING DATA
MAXIMUM PANEL THICKNESS
Size
Dimension D
GT00/020 GT030
Inches (mm) Inches (mm)
10SL .146 3.70 .303 7.70
14S .146 3.70 .303 7.70
16S .146 3.70 .303 7.70
16 .145 3.70 .242 6.15
18 .145 3.70 .303 7.70
20 .145 3.70 .303 7.70
22 .145 3.70 .303 7.70
24 .207 5.25 .303 7.70
28 .207 5.25 .343 8.70
32 .241 6.10 .309 7.85
36 .241 6.10 .309 7.85
40 .237 6.02 .309 7.85
PANEL CUT-OUT DIMENSIONS
Shell
Size
A Dia.
Hole
Size
Connector Styles
02, 020,
00, 030
Front
Mount
02, 00,
020
Rear
Mount
030 Jam Nut
070 Jam Nut
070
B ±.004 C Dia. C Dia. D Dia. E
10SL .126 .717 11/16 1 3/4 7/8 .83
14S .126 .906 13/16 1 1 1/8 1.08
16S/16 .126 .969 15/16 1 1/8 1 1/14 1.21
18 .126 1.063 1 1/16 1 1/4 1 3/8 1.32
20 .126 1.157 1 3/16 1 3/8 1 1/2 1.45
22 .126 1.252 1 5/16 1 1/2 1 5/8 1.57
24 .146 1.374 1 7/16 1 5/8 1 3/4 1.70
28 .146 1.563 1 11/16 1 7/8 2 1.95
32 .169 1.752 1 15/16 2 1/8 2 1/4 2.20
36 .169 1.937 2 1/8 2 3/8 2 1/2 2.45
40 .169 2.185 2 3/8 2 5/8 2 3/4 2.70
SEALING PLUG
10-405996-XX
Sealin g plugs ar e used
to fill unu sed ho les in
mult i -hole d gr om m et
configurations.
GROMMET HOLE
SEALING RANGES
Hole
Size
Sealing Range
(mm) Inches
16 1.62 – 3.3 .064 – .130
12 2.89 – 4.31 .114 – .170
8 4.16 – 6.47 .164 – .255
4 6.9 – 9.3 .272 – .370
0 10.5 – 13.97 .415 – .550
** ± .020 (in.) *** ± 0.5 (mm)
Order No. Contact
Size Wire
Size Color
Code
Inches
A Dia.
±.010 B
±.005 C
±.010
10-405996-16 16 20-16 Blue .083 .133 .564**
10-405996-12 12 14-12 Yellow .121 .171 .564**
10-405996-8 8 10-8 Red .185 .315 .470
10-405996-4 4 4-6 Blue .310 .415 .470
10-405996-0 0 0-2 Yellow .440 .605 1.000
Millimeters
A Dia.
± 0.2 B
± 0.1 C
± 0.2
2.1 3.4 14.3***
3.1 4.3 14.3***
4.7 8.0 11.9
7.9 10.5 11.9
11.2 15.4 25.4
All dimensions for reference only.
D MAX.
B
DIA.
A
DIA.
45O
C.135
3.4 + 0.8
– 0.6 mm
+.030
–.025 in.
B
TYP.
C DIA.
A DIA.
E
TYP.
D
DIA.
86
CRIMP CONTACTS
CRIMP CONTACT DATA APPLICATION TOOLS
PART NUMBER
MATING
SIZE WIRE
WELL Crim p Tools Positioner/
Die Set Locator/
Color
PIN CONTACT SOCKET CONTACT
SILVER GOLD(“D”) SILVER GOLD(“D”)
10-40553 10-597160-15D 10-597109-161 10-597109-16D
16S
16-18-20
Da ni el s AF8 or
Equivalent TH 29-1 or
Equivalent
Red
10-606014-40 10-597160-40D 10-597109-401 10-597109-40D 12-14
10-606014-221 10-597160-19D 10-597109-191 10-597109-19D 14-16
10-606014-291 10-597160-34D 10-597109-341 10-597109-34D 20-22
10-606014-46 10-597160-46D 10-597109-461 10-597109-46D 20-24
10-40557 10-597160-16D 10-597109-171 10-597109-17D
16
16-18-20
P i n - B l ue
So cket - G ree n
10-606014-022 10-597160-22D 10-597109-221 10-597109-22D 12-14
10-606014-171 10-597160-17D 10-597109-141 10-597109-14D 14-16
10-606014-311 10-597160-33D 10-597109-331 10-597109-33D 20-22
10-606014-361 10-597160-36D 10-597109-361 10-597109-36D 20-24
10-606014-121 10-597160-12D 10-597109-131 10-597109-13D
12
12-14
Green
10-606014-231 10-597160-23D 10-597109-231 10-597109-23D 8-10
10-606014-251 10-597160-26D 10-597109-261 10-597109-26D 10-12
10-606014-271 10-597160-27D 10-597109-271 10-597109-27D 14-16-18
10-606014-261 10-597160-24D 10-597109-241 10-597109-24D 18-20
10-606014-201 10-597160-20D 10-597109-201 10-597109-20D 20-22
10-40792 10-597160-8D 10-40793 10-597109-8D
8
8
Pico 400BHD
Pico 414DA-8N Pico
Pin - 4025
S ocket - 4026
10-606014-41 10-597160-41D 10-597109-411 10-597109-41D 6
10-606014-321 10-597160-28D 10-606015-321 10-597109-28D 10-12
10-606014-381 10-597160-38D 10-597109-381 10-597109-38D 12-14
10-40564 10-597160-4D 10-40565 10-597109-4D
4
4
Pico 414DA-4N Pico 4043
10-606014-58 10-597160-58D 10-597109-581 10-597109-58D 6
10-606014-331 10-597160-35D 10-597109-351 10-597109-35D 8
10-606014-44 10-597160-44D 10-606015-441 10-597109-44D 10
10-581806-000 10-597160-1D 10-581808-000 10-597159-1D
0
0
Pico 414DA-0N Pico
Pin - 4042-1
S ocket - 4042
10-606014-341 10-597160-29D 10-597109-291 10-597109-29D 0-2
10-606014-351 10-597160-30D 10-606015-351 10-597109-30D 4
10-597276-48 10-597276-48D 10-606015-48 10-597109-48D 2/0 2/0 Pic o 500 Pico 514 D A2 /0 N Pico
Pin - 6490
10-597276-47 10-597276-47D 10-606015-47 10-597109-47D 4/0 4/0 Pico 514DA4/0N Socket - 6491
Machined fr om copper alloys and silver or gold plated for maximum corrosion resistance, wi th a mini-
mum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of
the closed entry design. Crimp cont acts are availabl e for all MS insert arrangements and are identified
with an Amphenol® proprietary number.
GT Connectors
crimp con t acts an d appli ca ti on too l s
See page 87 for further contact information applicable to both crimp and solder contacts.
Additional contact variations including thermocouple and RADSOK power contacts are available; consult
Amphenol, Sidney, NY for information.
87
Machined copper alloy contacts in a full range of sizes, with closed entry socket design i n the
size 12 and 16 contacts. A heavy si lver-plated finish is deposited on al l MS style solder con-
tacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt
drop. Gold plat ed contacts are als o available. (See how to order, pg. 88 ).
Pin/
Socket Mating End
Size Wire Barrel
Size Allowable
Wire Size Test Current**
Amps
Pin
Socket 16 Short16
16
18
20
22
13
10
7.5
5
Pin
Socket 16 Lo ng 16
16
18
20
22
13
10
7.5
5
Pin
Socket 12 12 12
14 23
17
Pin
Socket 88 8
10 46
33
Pin
Socket 44 4
680
60
Pin
Socket 00 0
1
2
150
125
100
** Contact ratings as stated are test ratings only. The connector may not withstand full
rated current through all contacts continuously. Please note that the electrical data
given is not an establishment of electrical safety factors . This is left entirely in the
designer’s hands as he can best determine which peak voltage, switching surges,
transients, etc. can be expected in a particular circuit.
Table I
MIL- SPEC CONTACT ARRANGEMENT
SERVICE RATING
MS
Service
Rating
Recommended
Operating V oltage*
at Sea Level
Effective
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.DC AC (RMS)
Inst. 250 200 1/16
A 700 500 1/8 1/16
D 1250 900 3/16 1/8
E 1750 1250 1/4 3/16
B 2450 1750 5/16 1/4
C 4200 3000 1 5/16
* The val ues listed in Table I rep re sent operat ing val ues
which i nclude a gener ous safety factor. It may be nec-
essary for some applications to exceed the operating
voltages listed he re. If t his i s neces sar y, de signer s w ill
find Table II useful for deter mi ning the d egre e to whi ch
the recommended values of Table I can be exceeded.
Table II
ALTITUDE VOLTAGE
DERATING** CHART
Not corrected for changes in density due to variations in temperature
** No attempt has been made to recommend operating voltages. The designer must determine his own oper-
ating voltage by the application of a safety factor to the above derating chart to compensate for circuit tran-
sients, surges, etc.
MS
Service
Rating
Nominal
Distance Standard Sea
Level Conditions Pr essure Altitude
50,000 Feet Pr essure Altitude †
70,000 Feet
Airspace Creepage
Minimum
Flashover
Voltage
AC (RM S )
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RM S )
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RM S )
Test
Voltage
AC (RMS)
Inst. 1/32 1/16 1400 1000 550 400 325 260
A 1/16 1/8 2800 2000 800 600 450 360
D 1/8 3/16 3600 2800 900 675 500 400
E 3/16 1/4 4500 3500 1000 750 550 440
B 1/4 5/16 5700 4500 1100 825 600 480
C 5/16 1 8500 7000 1300 975 700 560
GT Connectors
solder contacts
The 10SL, 14S and 16S connectors
require short contacts.
88
Amphenol GT Connectors
how to order, connector intermate ab i lity
Part Number System
GT C 00 AFF 36-5 P W (014)
1234 5 67 8
1. Contact Style and Insert Material
C = Crimp
CN = Crimp with stainless steel
S = Solder
SN = Solder with stainless steel
CY = Crimp with Viton
SY = Solder with Viton
CL = Crimp with low smoke/flame retardant inserts
SL = Sol der with low smoke/ flame retar dant inserts
No designation required for Neoprene components
2. She ll Styl e
00 - Wall mount receptacle
01 - Inline receptacle
02 - Box mount receptacle
020 - Box mount receptacle with accessory threads
030 - Square flang e recept acle - rear pa nel mount
05 - Dummy receptacle
06 - Straight plug
062 - Straight pl ug wi th deep serrated coupling nut*
064 - Pa ne l moun t e d plu g w ith heav y duty cou plin g nut
065 - Straight plug with long heavy duty coupling nut
07 - Jam n ut receptacle - rear panel mo unt
070 - Jam nut receptacl e w ith accessory threads
08 - 90° angle plug
TB - Thru-bulkhead
3. Connector Class - For details, see pages 29-78
A - Adapter for accessory attachment, non-environmental
AF - Adapter, clamp for individual wires, non-environmental
CF - Adapter, jacketed cable clamp, environmental
CFGG- Adapter, jacketed cable clamp, over molded coupling nut,
environmental
CFZ - Adapter, jacketed cable clamp, individual wire sealing
grommet, environmental
F - Adapter, clamp for individual wires, individual wire sealing
grommet, environmental.
G - Adapter for heat shrink tubing, individual wire sealing
grommet, environmental
G2 - Free turning adapter for heat shrink tubing, individual wire
sealing grommet, e nvironmental
GTTB - Thru bulkhead receptacle, accepts mating plug on both sides
LC - Long adapter, backshell with jacketed ca ble basket weave
grip, with individual wire sealing grommet, environmental
LCF - Long adapter, jacketed cable clamp, environmental
LCFZ - Long adapter, jacketed cable clamp, individual wire sealing
grommet, environmental
LT - Adapter , backshell for terminating metallic core conduit
PFC - Adapter, backshell for plastic corrugated conduit, individual
wire sealing grommet, en vironmental
PG - Long adapter with PG th reads, i ndividual wire sealing
grommet, environmental
PP - Panel mou nted plug
R - Adapter f or accessory attachment, individual wire sealing
grommet, environmental
R - (02/03) No thread, no accessories, environmental with panel
sealing gaske t
R - (020) No accessories, environmental with panel sealing
gasket
RFS - (02) No accessories, countersunk mounting holes for use
with over mol ded coupling nut, e nviron mental with panel
sealing gaske t
RF SM- (020) N o accessories, cou ntersunk moun ting hol es for use
with over mol ded coupling nut, e nviron mental with panel
sealing gaske t
RV - Adapter , individual wire sealing grommet, environmental
SB - Adapter for termination of EM I/RFI shiel ded br aid wi th heat
shrink tubing or boot, individual wire sealing grommet,
environmental
SBT - A dapter for termina tion of EMI/RFI shield ed br aid with heat
shrink tubing or boot, individual wire sealing grommet,
environmental
SL - Long adapter, jacketed cable liquid tight strain relief,
environmental
4. Desig nat ion fo r Moun ting Hol e - Recep tacle Only
FF - UN Threads
FM - Metric Threads
No designation for standard through hole mounting holes.
5. Shell Size and Arr angement
See page s 2–4
6. Contact Style
P design ates pin contacts
S design ates socket contacts
7. Alternate Position
W, X, Y and Z - See page 5.
No suffix required for normal positi on.
8. Connector Modifi cation*
Omit for standard olive drab with silver plated contacts
i.e.: (014) Olive drab cadmium plate, nickel base
(B3 0) gol d/nickel pl at e d co ntac ts
(025) Black zi nc cobalt
(027) Conductive black zinc cobalt
(024) Green zinc cobalt
(LC) Less co ntact s
MATEABILITY W ITH
IDENTICAL CONTACT ARRANGEMENTS
Connector Style Mat eabl e with Styl e
GT 00 GT06 / 062 / 064 / 06 5 / 08
GT 01 GT06 / 062 / 064 / 06 5 / 08
GT 02 GT06 / 062 / 064 / 06 5 / 08
GT 020 GT06 / 062 / 064 / 065 / 08
GT 030 GT06 / 062 / 064 / 065 / 08
GT06 / 062 / 064 / 065 GT00 / 01 / 02 / 020 / 03 / 030 / 05 / 070 / TB
GT 07 / 070 GT06 / 062 / 06 4 / 065 / 08
GT08 GT00 / 01 / 02 / 020 / 03 / 030 / 05 / 070 / TB
GT TB GT06 / 062 / 064 / 065 / 0 8
®
* Consult Amphenol, Sidney, NY
89
Amphenol GT Connectors
with RADSOK techn ology
Amphenol offers Amphe-Power Connectors, high amperage
capability conn ectors designed for the most demanding industrial
and transpo rtation applications. The GT connectors, in most shell
styles, can be enhanced with RADSOK contacts that handle up
to 150% higher amper ages than standard conta cts.
The RADSOK contact is a hyperbolic, stamped grid configurat ion
within the socket. As male pin is inserted, axial members in the
female half deflect, imparting high current flow across the con-
nection with minimal voltage loss. This design ensures a large,
coaxial, face-to-face surface area engagement and provides
higher current capacity with minimized temperature rise. The
RADSOK’s strongest benefit is its very low mill-volt drop because
of the intimate contact provided by the spring force of the grid.
RADSOK contacts ar e avail able in size 8 (69 amps), size 4 (120
amps), and size 0 (250 amps). Current Amphe-Power lines sup-
port from 50A to 500A continuous duty. Hybrid arrangements
with RADSOK and power contacts can be tailored to meet cus-
tomer needs.
For more information on GT Amphe-Power Connectors, request
Brochure SL-391.
The RADSOK Contact Adv anta ge:
Low contact Resistance
Low milli-volt drop per formance
Hi gher current capacity wit h mini m ized temperature rise.
Rel iability under vib ration and shock.
Hi gh quality, consistency and lower cost
Amphe-Power Amphe-GTR
The Amphe-Power GT series provides the benefit of a GT con-
nector in a high performance composite material. The GT-R is
listed to UL/CUL 2238 Standard, Control Number 19VP. It also
meets all of the specificati ons for high power process control and
server applications. Perfor mance level is the sam e as that of the
GT series. RADSOK contact s enable an increased current rating
of 120A on individual contacts, and a standard PG thread
achiev es an IP67 seal rating.
Compression (setscrew) wire termination to the 4/6AWG or 8/
10AWG conductors allows for easy field replacement of pin or
socket contacts. It also provides for easy complete plug or recep-
tacle assemblies, all without a need for sp ecialized t oolin g.
Power GT
The Power GT is a modification to the GT series incorporating
three 8.0mm RADSOK contacts mounted in a common termina-
tion to busbar or cable, enhanced to an ultra-high current density
in a compact shell size 28 layout. This design created the first
TUV “finger-proof 500A connector in the marketplace with the
“dead-front” pin design to prevent contact with live circuits. In
environmental versions, this connector achieves IP67 perfor-
mance.
The ninet y- degree wire orientation on the plug provi des low-pro-
file mounting for tight packaging requirements. This plug is
designed to be ov er-molded, and can als o be fitted with mechan -
ical hardware for individual requirements.
Amphenol
®
GT Amphe- Power Connectors
with RADSOK
®
high amperage conta cts
®
Amph e-Po wer Composite GTR Connector
Power GT, Finger -Proof 500A Connector
90
GTC-M Seri es - The GT with Me tal Clip Inserts
Amphenol’s GTC-M series combines the GT reverse bayonet con-
nector and the rear release metal clip retention system which is
used in the Amphenol®/Matrix® MIL-C-5015 connector line.
Another benefit is the captivated coupling nut assembly which
allows unmating without the rear accessories attached.
Improved environmental sealing is achieved with this series. The
crimp j oint is covered by a three-webbed fluorinated silicone grom-
met that seals on the wires without the necessity of an additional
sealing clamp. An interfacial seal with conical towers on the pin
insert matches with recesses on the socket; a match that provides
the popular “cork and bottle ” seal during mating. The g rommet and
the interfacial seal provides adequate sealing during environmen-
tal extremes. The GTC-M series is intermateable and intermount-
able with the standard GT series, and it uses standard M85049
styl e rear acce ssori es. F or more i nformation on the GTC-M Series,
request Product Data Shee t #181.
GT-P C C o nnectors for H i gh Vo ltage Pow e r App li c atio ns
The Amphenol® GT-PC connectors were developed for use in the
High Voltage Power Distribution industry. Incorporating all the
standard features of the popular GT series, these connectors will
prevent accidental electrical shocks to the technicians. “Dead
Front” pin cont acts in size 0 are recessed into a socket insert, pre-
venting inadvertent contact with a live circuit. Higher amperage
levels are provided - up to 100 amps per contact. The GT-PC
serie s has been UL approved. “First Mate - Last Break” features on
one or more of the pins provide an additional measure of operator
safety. Currently there are 5 insert patterns available. Consult
Amphenol Industrial Operations for more information.
GT Co nnect ors for the HMI Lightin g In dustr y
Amphe nol provides GT connect ors for t he rugged use expe rien ced
during stage shows and other enter tainment events, even outside
in the elements. The same 3-point bayonet coupling system and
the same ruggedness to sur vive 2000 mating cycles are provided.
The unique features of this connector series include color-coded
receptacle shel ls wi th matchi ng backshells on the cable plugs. The
colors can be matched to specific wattage cables and/or light sys-
tems. A wide selection of environmental adapters designed to seal
on the outside diameter of specific cable diameters can be fitted to
the backshells. Applications for these connectors include power
and control of lighting trusses, and portable power and dimmer
racks. For more information r equest Prod uct Data Sheet #174.
Amphenol
®
GTC-M with Metal Clip Inserts
Amphenol
®
GT-PC Connectors for High Voltage
Power Applications
Amphenol
®
GT Connec tor s for the
HMI Light ing Indus try
Amphenol GT Connectors
special applications
®
91
Additional A mphenol Industrial Connectors
for the Rail Ind ustry
ARCL Series
Amphenol has developed a heavy duty 5015 ty pe connect or with
38999 Series III type coupl ing for use in mass transportation and
heavy equipment applications. The ARCL Series has the same
elect rical characteristics as 5015 standard product but it has rug-
ged ratchet double st art stub threads. These rugged doubl e stub
threads eliminat e mis-mating and provide for easy cleanin g.
Other f eatures/benefits of the ARCL connector series:
5 key/keyway alignment feature.
Operating te mperature is from –55 ° C to +125°C.
Operating voltage i s to 3000 VAC (RMS) at sea level.
Crimp and solder term ination available.
5 shell styles wi th all t h e 5 015 i n sert pa t te rns avail a bl e.
Suppl ied wit h low smoke, low halogen inser ts which are
fl ame retar dant, b ut also can be supp lied with standar d 5015
inserts.
Wide variety of backend accessories for all styles of cable
and conduit, and a vari ety of cab le strain relief s including
over-molding and heat shrink boot s.
RADSOK high amper age socke ts can be incorporat ed.
Star-Line® Se r ie s
Amphenol/Pyle Star-Line Series is another heavy duty environ-
mental cylindrical connector widely used in mass transportation
and in the oil exploration market. Ideal for high amperage and
high densi ty control and instrumentat ion applications, this series
has features and benefits as follows;
Hard anodic coating for dielectric strength with heat and cor-
rosion resi stance.
Operating te mperature is from –67 ° F to +257°F.
Amperages up to 1135 amps at 1000VA C or DC rating avail-
able.
Dou ble l ead Acme thr eads prov ide comp lete coup ling in one
turn of the coupli ng nut, and do not clog under adverse
w eather con ditions.
Sol der, crim p and pressu re termin als; circu it breaking po wer
and control types availa ble.
UL l isted and CSA lis ted for cir cuit breaki ng capability.
5 shell sty les with over 150 insert patterns .
3 r etention styles with captive contacts or insertable/remov-
able contacts.
Variety of ba c kend ac cess ories in cludi ng bask etw ea ve ca bl e
grips, str aight or angled adapters and recept acles mounted
to junction boxes.
Over-Molded Cable
Cables can be designed with custom overmold to Amphenol
Industrial cylindrical connectors for almost any application in
mass transportation or any other types of industrial markets.
Overmold seals to the rear of the connector and to the cable
jacket to provide moisture sealing. Cables may be designed to
meet any environmental perfor mance requirement and any elec-
trical performance requirement. Variety of materials are avail-
able: neoprene, hypalon and others.
Consult Amphenol Indust rial Operations for further information
on these industrial pr oducts.
Amphenol
®
ARCL Series
Amphenol
®
Star- Line
®
Series
Over-Molded Cable for Industrial Connectors
92
Additional A mphenol Industrial Products
for the Rail Industry, cont.
Trans-Power® Connectors
Amphenol/Pyle provides head-end power connectors for com-
mercial rail systems. These meet Amtrak specification D-77-24,
APTA #RP-E-016. Features and benefits include:
Slip-fit, double seated for environmental prot ection.
Ret ention by receptacle cover or opti onal accessories.
Crim p termination per Amtrak and APTA specifi cations.
Soc k et co ntacts provi de un if orm pressur e fo r low m ati ng and
unma ti ng forces, low voltage drop, consi stently l ow tempera-
ture rise and shock resi stance.
Operating ambi ent temper ature is –57°F to +110°F.
Electrical performance up to 600 volts, 400 Amps.
Al l molded elas tomeric rubber body on jumper. Rain tight per
U/L standard.
27 Pole Train-line Receptacles and Jumpers
Amphenol/Pyle 27 pole MU (multiple unit) and communication
receptacles and jumpers are provided for rai l applications. Jum p-
ers are either standard car to car, between locomotives or
between locomotives and lead cars. These products are
designed to Amtrak and APTA specifications. Other design fea-
tures and benefits :
Loc omotive jumpers are keyed differently from all other 27
pole jumper s to prevent mis- m ati ng. They also have id entifi-
cati on m arkings to di stin quish th eir proper usage on locomo -
tives.
Receptacles are a rugged alumin um housing with a sprin g
loaded cover. Receptacles can be provided with or without
leads.
Push-p ull m ati ng.
Amphe-Y Composite Molded Connectors
The Amphe-Y is a new Amphenol product for mass transit appli-
cation that uses RADSOK high amperage sockets. It is a molded
interconnect system that provides rapid and safe connect and
disconnect for traction motor i nstallation and repair.
This packaging solution consists of a molded base plate, a silver-
plated copper “connector with RADSOK contacts, and a molded
top cove r. When attached to the traction motor, thi s unit creates a
safe, reliable and efficient means of conducting high amperage
current from the third rail or catenary to the propulsion controller.
Each “leg” of this assem bly can safely accommodate up to 1000
amps through the 18mm RADSOK contacts.
Amphenol has wide capabilities in designing specialty molded
interconnect solutions, such as the new Amphe-Y, fo r power and/
or harsh environment applications. Custom designs can include
bayonet, theaded or push-pull coupling with crimp solder or pres-
sure termination. They can utilize RADSOK or standard contacts
and can be designed to meet specific environmental sealing
requirements and temperature ratings.
Consult Amphenol Indust rial Operations for further information
on these industrial pr oducts.
Amphenol
®
Trans-Power
®
Connectors
f or Rail Mass Transit
Amphenol
®
27 Pole Train-l ine
Receptacle and Jum pers f or Rai l Mass Transit
Amphe -Y M olded Interconnect System f or
Ra il Ma ss Tran si t
Amphenol GT Ser ies
Reverse Bayonet Coupling Connectors
Amphenol
12-024-8
®
Ruggedized Connector Series
for Rail/Mass Transit and other
Harsh Environments
AMPHENOL CORPORA TION
Amphenol Industrial Operations
40-60 Delaware A venue
Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011
www.amphenol-industrial.com