LMR23625CFQDDAQ1 - TEXAS INSTRUMENTS

RCA e3

www.vishay.com Vishay Draloric

Revision: 08-Apr-14 1Document Number: 20037

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Automotive, Sulfur Resistant

Lead (Pb)-Free Thick Film, Rectangular Chip Resistors

FEATURES

• Superior resistance against H2S-atmosphere

• Stability R/R = 1 % for 1000 h at 70 °C

• Metal glaze on high quality ceramic

• Pure tin solder contacts on Ni barrier layer,

provides compatibility with lead (Pb)-free and

lead containing soldering processes

• AEC-Q200 qualified, rev. C compliant

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

Notes

• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over

operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional time.

• Marking: See document “Surface Mount Resistor Marking” (document number 20020).

• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.

STANDARD ELECTRICAL SPECIFICATIONS

MODEL

CASE

SIZE

INCH

CASE

SIZE

METRIC

POWER RATING

P70 °C

LIMITING ELEMENT

VOLTAGE MAX.

TEMPERATURE

COEFFICIENT

ppm/K

TOLERANCE

RESISTANCE

RANGE



SERIES

RCA0402 0402 RR1005 0.063 50

± 50 ± 0.5, ± 1 100 to 1.0M E24; E96

± 100 ± 0.5 10 to 1.0M E24; E96

± 100 ± 1 10 to 10M E24; E96

± 200 ± 1 1.0 to 9.76 E24; E96

± 200 ± 5 1.0 to 10M E24

Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 °C = 1.5 A

RCA0603 0603 RR1608 0.10 75

± 50 ± 0.5, ± 1 100 to 10M E24; E96

± 100 ± 0.5 10 to 10M E24; E96

± 100 ± 1 1.0 to 10M E24; E96

± 200 ± 5 1.0 to 10M E24

Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 °C = 2.0 A

RCA0805 0805 RR2012 0.125 150

± 50 ± 0.5, ± 1 100 to 10M E24; E96

± 100 ± 0.5 10 to 10M E24; E96

± 100 ± 1 1.0 to 10M E24; E96

± 200 ± 5 1.0 to 10M E24

Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 °C = 2.5 A

RCA1206 1206 RR3216 0.25 200

± 50 ± 0.5, ± 1 100 to 10M E24; E96

± 100 ± 0.5 10 to 10M E24; E96

± 100 ± 1 1.0 to 10M E24; E96

± 200 ± 5 1.0 to 10M E24

Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 °C = 3.5 A

RCA1210 1210 RR3225 0.5 200

± 50 ± 0.5, ± 1 100 to 1.0M E24; E96

± 100 ± 0.5 10 to 1.0M E24; E96

± 100 ± 1 1.0 to 10M E24; E96

± 200 ± 5 1.0 to 10M E24

Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 °C = 5.0 A

RCA1218 1218 RR3246 1.0 200

± 50 ± 0.5, ± 1 100 to 2.2M E24; E96

± 100 ± 0.5 100 to 2.2M E24; E96

± 100 ± 1 1.0 to 2.2M E24; E96

± 200 ± 5 1.0 to 2.2M E24

Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 °C = 7.0 A

RCA2010 2010 RR5025 0.75 400

± 50 ± 0.5, ± 1 100 to 10M E24; E96

± 100 ± 0.5 10 to 10M E24; E96

± 100 ± 1 1.0 to 10M E24; E96

± 200 ± 5 1.0 to 10M E24

Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 °C = 6.0 A

RCA2512 2512 RR6332 1.0 500

± 50 ± 0.5, ± 1 100 to 10M E24; E96

± 100 ± 0.5 10 to 10M E24; E96

± 100 ± 1 1.0 to 10M E24; E96

± 200 ± 5 1.0 to 10M E24

Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 °C = 7.0 A

RCA e3

www.vishay.com Vishay Draloric

Revision: 08-Apr-14 2Document Number: 20037

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the

printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.

Notes

(2) Preferred way for ordering products is by use of the PART NUMBER

(3) Please refer to table PACKAGING, see next page

TECHNICAL SPECIFICATIONS

PARAMETER UNIT RCA0402 RCA0603 RCA0805 RCA1206 RCA1210 RCA1218 RCA2010 RCA2512

Rated dissipation P70 (1) W 0.063 0.10 0.125 0.25 0.5 1.0 0.75 1.0

Limiting element voltage Umax.

AC/DC V 50 75 150 200 200 200 400 500

Insulation voltage Uins. (1 min) V > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300

Insulation resistance > 109

Category temperature range °C - 55 to + 155

Failure rate h-1 < 0.1 × 10-9

Mass mg 0.65 2 5.5 10 16 29.5 25.5 40.5

PART NUMBER AND PRODUCT DESCRIPTION

Part Number: RCA080510K0FKEA (2)

MODEL VALUE TOLERANCE TCR PACKAGING (3)

RCA0402

RCA0603

RCA0805

RCA1206

RCA1210

RCA1218

RCA2010

RCA2512

R = Decimal

K = Thousand

M = Million

0000 = 0  Jumper

D = ± 0.5 %

F = ± 1 %

J = ± 5 %

Z = Jumper

H = ± 50 ppm/K

K = ± 100 ppm/K

N = ± 200 ppm/K

S = Jumper

Product Description: RCA0805 10K 1 % 100 ET1 e3

RCA0805 10K 1 % 100 ET1 e3

MODEL RESISTANCE

VALUE TOLERANCE TCR PACKAGING (3) LEAD (Pb)-FREE

RCA0402

RCA0603

RCA0805

RCA1206

RCA1210

RCA1218

RCA2010

RCA2512

10R = 10 

10K = 10 k

1M = 1 M

0R0 = Jumper

± 0.5 %

± 1 %

± 5 %

± 50 ppm/K

± 100 ppm/K

± 200 ppm/K

ET1, ET5

ET6, ET7

EF4, E02

E67, E82

ET9

e3 = Pure tin

termination finish

R C A 0 8 0 5 1 0 K 0 F K E A

RCA e3

www.vishay.com Vishay Draloric

Revision: 08-Apr-14 3Document Number: 20037

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGING

MODEL

REEL

TAPE

WIDTH DIAMETER PITCH PIECES/

REEL

PACKAGING CODE

PART NUMBER PRODUCT DESC.

PAPER BLISTER PAPER BLISTER

RCA0402 8 mm

180 mm/7" 2 mm 10 000 ED ET7

285 mm/11.25" 2 mm 20 000 EC ET6

330 mm/13" 2 mm 50 000 EE EF4

RCA0603 8 mm

180 mm/7" 4 mm 5000 EA ET1

285 mm/11.25" 4 mm 10 000 EB ET5

330 mm/13" 4 mm 20 000 EC ET6

RCA0805 8 mm

180 mm/7" 4 mm 5000 EA ET1

285 mm/11.25" 4 mm 10 000 EB ET5

330 mm/13" 4 mm 20 000 EC ET6

RCA1206 8 mm

180 mm/7" 4 mm 5000 EA ET1

285 mm/11.25" 4 mm 10 000 EB ET5

330 mm/13" 4 mm 20 000 EC ET6

RCA1210 8 mm

180 mm/7" 4 mm 5000 EA ET1

285 mm/11.25" 4 mm 10 000 EB ET5

330 mm/13" 4 mm 20 000 EC ET6

RCA1218 12 mm 180 mm/7" 4 mm 4000 EK ET9

RCA2010 12 mm 180 mm/7" 4 mm 4000 EF E02

RCA2512 12 mm 180 mm/7" 8 mm 2000 EG E67

4 mm 4000 EH E82

DIMENSIONS in millimeters

SIZE DIMENSIONS SOLDER PAD DIMENSIONS

REFLOW SOLDERING WAVE SOLDERING

INCH METRIC L W H T1 T2 a b l a b l

0402 1005 1.0 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 0.25 ± 0.05 0.2 ± 0.1 0.4 0.6 0.5

0603 1608 1.55 + 0.10

- 0.05 0.85 ± 0.1 0.45 ± 0.05 0.3 ± 0.2 0.3 ± 0.2 0.5 0.9 1.0 0.9 0.9 1.0

0805 2012 2.0 + 0.20

- 0.10 1.25 ± 0.15 0.45 ± 0.05 0.3 + 0.20

- 0.10 0.3 ± 0.2 0.7 1.3 1.2 0.9 1.3 1.3

1206 3216 3.2 + 0.10

- 0.20 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 0.9 1.7 2.0 1.1 1.7 2.3

1210 3225 3.2 ± 0.2 2.5 ± 0.2 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 0.9 2.5 2.0 1.1 2.5 2.2

1218 3246 3.2 + 0.10

- 0.20 4.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 1.05 4.9 1.9 1.25 4.8 1.9

2010 5025 5.0 ± 0.15 2.5 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 2.5 3.9 1.2 2.5 3.9

2512 6332 6.3 ± 0.2 3.15 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 3.2 5.2 1.2 3.2 5.2

RCA e3

www.vishay.com Vishay Draloric

Revision: 08-Apr-14 4Document Number: 20037

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

FUNCTIONAL PERFORMANCE

PERFORMANCE IN SULFUR-CONTAINING AMBIANCE

TEST NAME HUMID SULFUR VAPOR TEST HUMID SULFUR VAPOR TEST

(Accelerated)

Reference specification ASTM B809-95 ASTM B809-95

accelerated conditions

Test conditions

(temperature, humidity)

60 °C ± 2 °C

85 % ± 4 % RH

90 °C ± 2 °C

74 % ± 7 % RH

Aggressive agent Sulfur (saturated vapor) Sulfur (saturated vapor)

Failure criteria in VI under magnification

No silver sulfide growth at the interface

between termination and protective overcoat.

No signs of mechanical damage.

No silver sulfide growth at the interface

between termination and protective overcoat.

No signs of mechanical damage.

Failure criteria in electrical test  (± 1 % R + 0.05 ) (± 1 % R + 0.05 )

Time before failure 8000 h 1000 h

- 55 - 25 0 25 50 75 100 125 155 175

120

100

Derating Ambient Temperature in °C

Rated Power in %

RCA e3

www.vishay.com Vishay Draloric

Revision: 08-Apr-14 5Document Number: 20037

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

All tests are carried out in accordance with the following specifications:

• EN 60115-1, generic specification

• EN 140400, sectional specification

• EN 140401-802, detail specification

• AEC-Q200, automotive specification

• IEC 60068-2, environmental test procedures

• ASTM B 809-95, standard test method for porosity in metallic coatings by humid sulfur.

Packaging of components is done in paper or blister tapes according to IEC 60286-3.

TEST PROCEDURES AND REQUIREMENTS

EN 60115-1

CLAUSE

IEC 60068-2

TEST METHOD TEST

PROCEDURE

REQUIREMENTS

PERMISSIBLE CHANGE (R)

SIZE 0402 SIZE 0603 TO 2512

STABILITY CLASS 2 OR BETTER

Stability for product types:

1  to 10M

RCA e3

4.5 - Resistance - 0.5 %, ± 1 %, ± 5 %

4.8.4.2 - Temperature coefficient (20/- 55/20) °C and (20/125/20) °C ± 50 ppm/K, ± 100 ppm/K, ± 200 ppm/K

4.13 - Short time overload

U = 2.5 x

 2 x Umax.;

duration: According to style

± (0.25 % R + 0.05 )

4.19 14 (Na) Rapid change of

temperature

30 min. at - 55 °C;

30 min. at 125 °C

5 cycles

1000 cycles

± (0.25 % R + 0.05 )

± (1 % R + 0.05 )

4.25.1 - Endurance

at 70 °C

U =  Umax.;

1.5 h on; 0.5 h off;

70 °C , 1000 h

± (1 % R + 0.05 ) ± (0.5 % R + 0.05 )

4.18.2 58 (Td) Resistance to

soldering heat

Solder bath method

(260 ± 5) °C

(10 ± 1) s

± (0.25 % R + 0.05 )

4.24 78 (Cab) Damp heat,

steady state

(40 ± 2) °C;

(93 ± 3) % RH;

56 days

± (1 % R + 0.05 ) ± (0.5 % R + 0.05 )

4.25.3 -

Endurance at

upper category

temperature

155 °C, 1000 h ± (0.5 % R + 0.05 )

P70 x R

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.