RCA e3 www.vishay.com Vishay Draloric Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors FEATURES * * * * Superior resistance against H2S-atmosphere Stability R/R = 1 % for 1000 h at 70 C Metal glaze on high quality ceramic Pure tin solder contacts on Ni barrier layer, provides compatibility with lead (Pb)-free and lead containing soldering processes * AEC-Q200 qualified, rev. C compliant * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS MODEL RCA0402 RCA0603 RCA0805 RCA1206 RCA1210 RCA1218 RCA2010 RCA2512 CASE CASE SIZE SIZE INCH METRIC 0402 0603 0805 1206 1210 1218 2010 2512 RR1005 RR1608 RR2012 RR3216 RR3225 RR3246 RR5025 RR6332 POWER RATING P70 C W 0.063 0.10 0.125 0.25 0.5 1.0 0.75 1.0 TEMPERATURE TOLERANCE RESISTANCE RANGE COEFFICIENT % ppm/K 50 0.5, 1 100 to 1.0M 100 0.5 10 to 1.0M 100 1 10 to 10M 50 200 1 1.0 to 9.76 200 5 1.0 to 10M Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 1.5 A 50 0.5, 1 100 to 10M 100 0.5 10 to 10M 75 100 1 1.0 to 10M 200 5 1.0 to 10M Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 2.0 A 50 0.5, 1 100 to 10M 100 0.5 10 to 10M 150 100 1 1.0 to 10M 200 5 1.0 to 10M Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 2.5 A 50 0.5, 1 100 to 10M 100 0.5 10 to 10M 200 100 1 1.0 to 10M 200 5 1.0 to 10M Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 3.5 A 50 0.5, 1 100 to 1.0M 100 0.5 10 to 1.0M 200 100 1 1.0 to 10M 200 5 1.0 to 10M Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 5.0 A 50 0.5, 1 100 to 2.2M 100 0.5 100 to 2.2M 200 100 1 1.0 to 2.2M 200 5 1.0 to 2.2M Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 7.0 A 50 0.5, 1 100 to 10M 100 0.5 10 to 10M 400 100 1 1.0 to 10M 200 5 1.0 to 10M Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 6.0 A 50 0.5, 1 100 to 10M 100 0.5 10 to 10M 500 100 1 1.0 to 10M 200 5 1.0 to 10M Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 7.0 A LIMITING ELEMENT VOLTAGE MAX. V SERIES E24; E96 E24; E96 E24; E96 E24; E96 E24 E24; E96 E24; E96 E24; E96 E24 E24; E96 E24; E96 E24; E96 E24 E24; E96 E24; E96 E24; E96 E24 E24; E96 E24; E96 E24; E96 E24 E24; E96 E24; E96 E24; E96 E24 E24; E96 E24; E96 E24; E96 E24 E24; E96 E24; E96 E24; E96 E24 Notes * These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional time. * Marking: See document "Surface Mount Resistor Marking" (document number 20020). * Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. Revision: 08-Apr-14 Document Number: 20037 1 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RCA e3 www.vishay.com Vishay Draloric TECHNICAL SPECIFICATIONS PARAMETER UNIT RCA0402 RCA0603 RCA0805 RCA1206 RCA1210 RCA1218 RCA2010 RCA2512 Rated dissipation P70 (1) W 0.063 0.10 0.125 0.25 0.5 1.0 0.75 1.0 Limiting element voltage Umax. AC/DC V 50 75 150 200 200 200 400 500 Insulation voltage Uins. (1 min) V > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300 Insulation resistance > 109 Category temperature range C - 55 to + 155 Failure rate h-1 Mass mg 29.5 25.5 40.5 < 0.1 x 10-9 0.65 2 5.5 10 16 Note (1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 C is not exceeded. PART NUMBER AND PRODUCT DESCRIPTION Part Number: RCA080510K0FKEA (2) R C A 0 8 0 5 1 0 K 0 F K E MODEL VALUE TOLERANCE TCR PACKAGING (3) RCA0402 RCA0603 RCA0805 RCA1206 RCA1210 RCA1218 RCA2010 RCA2512 R = Decimal K = Thousand M = Million 0000 = 0 Jumper D = 0.5 % F=1% J=5% Z = Jumper H = 50 ppm/K K = 100 ppm/K N = 200 ppm/K S = Jumper EA EB EC ED EE EF EG EH EK A Product Description: RCA0805 10K 1 % 100 ET1 e3 RCA0805 10K 1% 100 ET1 e3 MODEL RESISTANCE VALUE TOLERANCE TCR PACKAGING (3) LEAD (Pb)-FREE 10R = 10 10K = 10 k 1M = 1 M 0R0 = Jumper 0.5 % 1% 5% 50 ppm/K 100 ppm/K 200 ppm/K ET1, ET5 ET6, ET7 EF4, E02 E67, E82 ET9 e3 = Pure tin termination finish RCA0402 RCA0603 RCA0805 RCA1206 RCA1210 RCA1218 RCA2010 RCA2512 Notes Preferred way for ordering products is by use of the PART NUMBER (3) Please refer to table PACKAGING, see next page (2) Revision: 08-Apr-14 Document Number: 20037 2 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RCA e3 www.vishay.com Vishay Draloric PACKAGING REEL PACKAGING CODE MODEL TAPE WIDTH DIAMETER PITCH PIECES/ REEL PART NUMBER PAPER RCA0402 8 mm RCA0603 8 mm RCA0805 8 mm RCA1206 8 mm RCA1210 8 mm 180 mm/7" 2 mm 10 000 ED ET7 2 mm 20 000 EC ET6 330 mm/13" 2 mm 50 000 EE EF4 180 mm/7" 4 mm 5000 EA ET1 285 mm/11.25" 4 mm 10 000 EB ET5 330 mm/13" 4 mm 20 000 EC ET6 180 mm/7" 4 mm 5000 EA ET1 285 mm/11.25" 4 mm 10 000 EB ET5 330 mm/13" 4 mm 20 000 EC ET6 180 mm/7" 4 mm 5000 EA ET1 285 mm/11.25" 4 mm 10 000 EB ET5 330 mm/13" 4 mm 20 000 EC ET6 180 mm/7" 4 mm 5000 EA ET1 285 mm/11.25" 4 mm 10 000 EB ET5 330 mm/13" 4 mm 20 000 EC ET6 12 mm 180 mm/7" 4 mm 4000 RCA2010 12 mm 180 mm/7" 4 mm 8 mm 4 mm 12 mm PAPER 285 mm/11.25" RCA1218 RCA2512 PRODUCT DESC. BLISTER 180 mm/7" BLISTER EK ET9 4000 EF E02 2000 EG E67 4000 EH E82 DIMENSIONS in millimeters SIZE SOLDER PAD DIMENSIONS DIMENSIONS INCH METRIC L W T2 a b l 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.05 0.2 0.1 0.4 0.6 0.5 0603 1608 0.10 1.55 +- 0.05 0.85 0.1 0.45 0.05 0.3 0.2 0.5 0.9 0805 2012 0.20 2.0 +- 0.10 1.25 0.15 0.45 0.05 0.20 0.3 +- 0.10 0.3 0.2 0.7 1206 3216 0.10 3.2 +- 0.20 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 1210 3225 3.2 0.2 T1 0.3 0.2 WAVE SOLDERING a b l 1.0 0.9 0.9 1.0 1.3 1.2 0.9 1.3 1.3 0.9 1.7 2.0 1.1 1.7 2.3 2.5 0.2 0.55 0.05 0.45 0.2 0.4 0.2 0.9 2.5 2.0 1.1 2.5 2.2 + 0.10 - 0.20 4.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 1.05 4.9 1.9 1.25 4.8 1.9 1218 3246 2010 5025 5.0 0.15 2.5 0.15 0.6 0.1 0.6 0.2 0.6 0.2 1.0 2.5 3.9 1.2 2.5 3.9 2512 6332 6.3 0.2 3.15 0.15 0.6 0.1 0.6 0.2 0.6 0.2 1.0 3.2 5.2 1.2 3.2 5.2 Revision: 08-Apr-14 3.2 H REFLOW SOLDERING Document Number: 20037 3 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RCA e3 www.vishay.com Vishay Draloric FUNCTIONAL PERFORMANCE PERFORMANCE IN SULFUR-CONTAINING AMBIANCE HUMID SULFUR VAPOR TEST HUMID SULFUR VAPOR TEST (Accelerated) Reference specification ASTM B809-95 ASTM B809-95 accelerated conditions Test conditions (temperature, humidity) 60 C 2 C 85 % 4 % RH 90 C 2 C 74 % 7 % RH Sulfur (saturated vapor) Sulfur (saturated vapor) TEST NAME Aggressive agent No silver sulfide growth at the interface No silver sulfide growth at the interface between termination and protective overcoat. between termination and protective overcoat. No signs of mechanical damage. No signs of mechanical damage. Failure criteria in VI under magnification Failure criteria in electrical test ( 1 % R + 0.05 ) ( 1 % R + 0.05 ) 8000 h 1000 h Rated Power in % Time before failure 120 100 80 60 40 20 0 - 55 Derating Revision: 08-Apr-14 - 25 0 25 50 75 70 100 125 155 175 Ambient Temperature in C Document Number: 20037 4 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RCA e3 www.vishay.com Vishay Draloric TEST PROCEDURES AND REQUIREMENTS REQUIREMENTS PERMISSIBLE CHANGE (R) PROCEDURE EN 60115-1 IEC 60068-2 CLAUSE TEST METHOD SIZE 0402 TEST SIZE 0603 TO 2512 STABILITY CLASS 2 OR BETTER Stability for product types: 1 to 10 M RCA e3 4.5 - Resistance - 0.5 %, 1 %, 5 % 4.8.4.2 - Temperature coefficient (20/- 55/20) C and (20/125/20) C 50 ppm/K, 100 ppm/K, 200 ppm/K - Short time overload U = 2.5 x P 70 x R 2 x Umax.; duration: According to style (0.25 % R + 0.05 ) 14 (Na) Rapid change of temperature 30 min. at - 55 C; 30 min. at 125 C 5 cycles 1000 cycles 4.25.1 - Endurance at 70 C U = P 70 x R Umax.; 1.5 h on; 0.5 h off; 70 C , 1000 h 4.18.2 58 (Td) Resistance to soldering heat Solder bath method (260 5) C (10 1) s 78 (Cab) Damp heat, steady state (40 2) C; (93 3) % RH; 56 days - Endurance at upper category temperature 155 C, 1000 h 4.13 4.19 4.24 4.25.3 (0.25 % R + 0.05 ) (1 % R + 0.05 ) (1 % R + 0.05 ) (0.5 % R + 0.05 ) (0.25 % R + 0.05 ) (1 % R + 0.05 ) (0.5 % R + 0.05 ) (0.5 % R + 0.05 ) All tests are carried out in accordance with the following specifications: * EN 60115-1, generic specification * EN 140400, sectional specification * EN 140401-802, detail specification * AEC-Q200, automotive specification * IEC 60068-2, environmental test procedures * ASTM B 809-95, standard test method for porosity in metallic coatings by humid sulfur. Packaging of components is done in paper or blister tapes according to IEC 60286-3. Revision: 08-Apr-14 Document Number: 20037 5 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000