www.mccsemi .com
BZT52C2V4 thru BZT52C39
MCC
Electrical Characteristics @ 25oC Unless Otherwise Specified
NORMAL
ZENER
VOLTAGE
Vz@ Izt
TEST
CURRENT Izt
MAXIMUM ZENER
IMPEDANCE
‘B’ SUFFIX ONLY
Zzt @ Izt Zzk @ Izk=1.0mA
MAXIMUM REVERSE
LEAKAGE CURRENT
Ir @ Vr
Max. Zener Current
Izm @ TA
MCC PART
NUMBER
Marking
VOLTS mA OHMS OHMS nA VOLTS mA
BZT52C2V4 W1 2.4 5 85 600 100000 1.0 -
BZT52C2V7 W2 2.7 5 83 500 75000 1.0 134
BZT52C3 W3 3.0 5 95 500 50000 1.0 118
BZT52C3V3 W4 3.3 5 95 500 25000 1.0 109
BZT52C3V6 W5 3.6 5 95 500 15000 1.0 100
BZT52C3V9 W6 3.9 5 95 500 10000 1.0 92
BZT52C4V3 W7 4.3 5 95 500 5000 1.0 84
BZT52C4V7 W8 4.7 5 78 500 5000 1.0 76
BZT52C5V1 W9 5.1 5 60 480 100 0.8 67
BZT52C5V6 WA 5.6 5 40 400 100 1.0 59
BZT52C6V2 WB 6.2 5 10 200 100 2.0 54
BZT52C6V8 WC 6.8 5 8.0 150 100 3.0 49
BZT52C7V5 WD 7.5 5 7.0 50 100 5.0 44
BZT52C8V2 WE 8.2 5 7.0 50 100 6.0 40
BZT52C9V1 WF 9.1 5 10 50 100 7.0 36
BZT52C10 WG 10 5 15 70 100 7.5 33
BZT52C11 WH 11 5 20 70 100 8.5 30
BZT52C12 WI 12 5 20 90 100 9.0 28
BZT52C13 WK 13 5 25 110 100 10 25
BZT52C15 WL 15 5 30 110 100 11 23
BZT52C16 WM 16 5 40 170 100 12 20
BZT52C18 WN 18 5 50 170 100 14 18
BZT52C20 WO 20 5 50 220 100 15 17
BZT52C22 WP 22 5 55 220 100 17 16
BZT52C24 WR 24 5 80 220 100 18 13
BZT52C27 WS 27 5 80 250 100 20 12
BZT52C30 WT 30 5 80 250 100 22.5 10
BZT52C33 WU 33 5 80 250 100 25 9
BZT52C36 WW 36 5 90 250 100 27 9
BZT52C39 WX 39 5 90 300 100 29 8
NOTE:
1.Tolerance and Type Number Designation. The type numbers listed have a standard tolerance on the nominal zener voltage of ±5%.
2.Specials Available Include:
A. Nominal zener voltages between the voltages shown and tighter voltage tolerances.
B. Matched sets.
3.Zener Voltage (VZ) Measurement. Guarantees the zener voltage when measured at 90 seconds while maintaining the lead temperature (TL) at 30OC, from the diode body.
4.Zener Impedance (ZZ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an AC current having an rms value equal to 10% of the dc zener
current (IZT or IZK) is superimposed on IZT or IZK.
5.Surge Current (IR) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine
wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration; however, actual device capability is as described in Figure 5.