Nov-18
FEATURES
Small Size – Safety Agency Approved –
Metalized Polypropylene
APPLICATIONS
EMI filters – Across the Line
(Not for use in Series with Mains; See MPXB)
Operating Temperature Range
-40°C to +110°C
Capacitance Tolerance
+10% at 1 kHz, 20°C
AC voltage
(50/60 Hz)
UL/CSA
ENEC
CQC
250/275/310
250/275/310
310
Dissipation Factor
at 1 kHz and 20°C
Tan δ
.1% Max
Insulation Resistance
@20°C (<70% RH)for 1 minute
at 100VDC applied
Capacitance
Terminal to Terminal
Terminal to Case
<0.33uF
15000 MΩ
>30000 MΩ at 100VDC
>5000 MΩ at 500VDC
>0.33uF
5000 MΩxuF
>30000 MΩ at 100VDC
>5000 MΩ at 500VDC
Self Inductance
<1 nano-Henry per mm of lead spacing
Dielectric Strength
Terminal to Terminal
1333VDC (4.3*310) VDC applied for 60 seconds
Cut-off current: 10mAdc
Current limiting resistance: 1Ω/V
Terminal to case
2050VDC (50/60 Hz) applied between the terminals and case for 60
Seconds and 20°C
Life Expectancy
1000 hours at 110°C at 125% of rated voltage with once every hour the voltage is
increased to 1000 VAC for 0.1 seconds
Capacitance change
<10% of initially measured value
Dissipation Factor
<0.8% at 1kHz
Insulation Resistance
>50% of initially specified value (T-T)
Humidity test
56 days at 90 to 95% RH, 40C
Capacitance change
<10% of initially measured value
Dissipation Factor
<0.8% at 1kHz
Insulation Resistance
>50% of initially specified value (T-T)
Impulse voltage
(24 pulses)
C< 1uF Vp=2.5kVDC
C> 1uF Vp=2.5kV √C
Capacitance temperature
coefficient
-200ppm/°C, +100ppm/°C
Construction
Metallized Polypropylene film
Electrodes
Vacuum deposited Metal layers
Coating
Flame retardant Solvent resistant plastic case with epoxy end fill (UL94V-0)
Lead terminations
tinned copper clad steel leads
Nov-18
All Dimensions in (mm)
*17mm lead length available upon request
X capacitors are used to suppress electrical noise by reducing the input impedance of
the device incorporating the capacitor.
X capacitors are connected across the supply line where failure of the capacitor will
not result in personal exposure to electrical shock.
X2 capacitors are to be used in applications where the peak voltage is <1200V.
Safety
agency
Standard
Voltage
Class
Certificate
number
UL/CSA
ANSI/UL 60384-14
250/275/310
FOWX2
E317135
CSA E60384-1
250/275/310
FOWX8
E317135
VDE/ENEC
DIN EN 60384-14 (VDE 0565 (1-1),
EN60384-14:2013-08, IEC60384-14
(ED 4)
250/275/310
X2
40040758
CQC
GB/T6346.14-2015 (.0022 to 10uF)
310
X2
CQC14001115428
MKPClassX2
Capacitance
(µF)ICPARTNUMBERdv/dt
(v/µsec.)DimsLxHxT(mm)S(MM)d(MM)
0.0047472MKP275KC50010x8x47.50.6
0.0047472MKP275K40013x10x5100.6
0.0056562MKP275KC50010x8x47.50.6
0.0056562MKP275KD40013x9x4100.6
0.0068682MKP275KC50010x8x47.50.6
0.0068682MKP275K40013x9x4100.6
0.0082822MKP275KC50010x8x47.50.6
0.0082822MKP275KD40013x9x4100.6
0.01103MKP275KE40018x8x4150.6
0.01103MKP275KC50010x8x47.50.6
0.01103MKP275K40013x9x4100.6
0.015153MKP275K40013x9x4100.6
0.015153MKP275KC50010x8x47.50.6
0.015153MKP275KE40018x8x4150.8
0.022223MKP275KC50010x9x47.50.6
0.022223MKP275KCG550010x8x47.50.6
0.022223MKP275KB40018x9x4150.6
0.022223MKP275K40013x9x4100.6
0.033333MKP275K40013x9x4100.6
0.033333MKP275KC50010x9x57.50.6
0.033333MKP275KCG450010x10x57.50.6
0.033333MKP275KE40018x9x14150.8
0.047473MKP275KD40013x9x4100.6
0.047473MKP275KC50010x10x57.50.6
0.047473MKP275K40018x9x4150.6
0.056563MKP275KC50010x11x57.50.6
0.056563MKP275KE40018x9x4150.6
0.056563MKP275KD40013x9.5x4.5100.6
0.068683MKP275KD40013x10x5100.6
0.068683MKP275KC50010x12x67.50.6
0.068683MKP275K40018x10x4150.6
0.082823MKP275KC50010x12x67.50.6
0.082823MKP275KD40013x11x5100.6
0.082823MKP275KE40018x10x5150.8
0.1104MKP275KG540018x10.5x5150.8
0.1104MKP275KC50010x13x77.50.6
0.1104MKP275KD40013x11x5100.6
0.1104MKP275K40018x11x5150.8
0.12124MKP275KE40018x10x5150.8
0.12124MKP275KD40013x12x6100.6
0.15154MKP275KD40013x12x7100.6
0.15154MKP275KA35015x11.5x612.50.8
0.15154MKP275K18026x14.5x622.50.8
0.15154MKP275KE40018x10.5x5150.8
0.22224MKP275KB40018x11.5x6150.8
0.22224MKP275K18026x14.5x622.50.8
0.22224MKP275KA35015x12.5x712.50.8
0.22224MKP275KD40013x14x8100.6
0.22224MKP275KBG440018x13x7150.8
Capacitance
(µF)ICPARTNUMBERdv/dt
(v/µsec.)DimsLxHxT(mm)S(MM)d(MM)
0.33334MKP275KA35015x14x8.512.50.8
0.33334MKP275K18026x12x622.50.8
0.33334MKP275KE40018x13x7150.8
0.39394MKP275KG18026x12x622.50.8
0.39394MKP275KA35015x15x912.50.8
0.39394MKP275KE40018x13.5x7.5150.8
0.47474MKP275KE40018x13.2x7.2150.8
0.47474MKP275KBG518026x14.2x622.50.8
0.47474MKP275KA35015x16x1012.50.6
0.47474MKP275K12031x13.5x627.50.8
0.47474MKP275KB18026x16.5x7.522.50.8
0.47474MKP275KG412032x18x927.50.8
0.56564MKP275KH12031x14x6.527.50.8
0.56564MKP275KE40018x15x9150.8
0.56564MKP275KG18026x14x722.50.8
0.68684MKP275KG18026x17x822.50.8
0.68684MKP275K12031x15.5x6.527.50.8
0.68684MKP275KE40018x16x10150.8
0.82824MKP275KE40018x17.5x10150.8
0.82824MKP275KG18026x16x822.50.8
0.82824MKP275KH12031x16x7.527.50.8
1105MKP275K12031x17x827.50.8
1105MKP275KE40018x18.5x11150.8
1105MKP275KG18026x17x922.50.8
1105MKP275KGG418026x19x1022.50.8
1.2125MKP275KH12031x17.5x927.50.8
1.2125MKP275KG18026x19.5x922.50.8
1.5155MKP275KG18026x21x1022.50.8
1.5155MKP275K12031x18.5x1027.50.8
1.8185MKP275KG18026x23x12.522.50.8
1.8185MKP275KH12031x20.5x1227.50.8
2.2225MKP275KGE18026x22x1522.50.8
2.2225MKP275KG18026x24x13.522.50.8
2.2225MKP275KG512031x22x1327.50.8
2.2225MKP275K12031x26x1827.50.8
3.3335MKP275KHF12031x26x17.527.50.8
3.3335MKP275KH12031x29x15.527.50.8
3.3335MKP275KJ10041.5x26x14.537.51
3.9395MKP275KJ10041.5x27.5x1637.51
3.9395MKP275KH12031x28x1927.50.8
4.7475MKP275KH12031x30.5x2027.50.8
4.7475MKP275KHG12031x32.5x1927.50.8
4.7475MKP275KJ10041.5x30x1737.51
5.6565MKP275KJ10041.5x31.5x18.537.51
5.6565MKP275KH12031x34.5x2127.50.8
6.8685MKP275KJ10041.5x35.5x22.537.51
8.2825MKP275KJ10041.5x38x2537.51
10106MKP275KJ10041.5x41x27.537.51
