P Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors FEATURES * Load life stability at 70 C for 2000 h: 0.1 % under Pn/0.05 % under Pd * Low temperature coefficient down to 5 ppm/C (- 25 C; + 85 C) * Very low noise < 35 dB and voltage coefficient < 0.01 ppm/V * Wide resistance range: 10 to 50 M depending on size For low noise and precision applications, superior stability, low temperature coefficient of resistance, and low voltage coefficient, VISHAY SFERNICE's proven precision thin film wraparound resistors exceed requirements of MIL-PRF-55342G characteristics Y 10 ppm/C (- 55 C; + 155 C) down to 5 ppm/C (- 25 C; + 85 C). * Tolerances to 0.01 % * In lot tracking 5 ppm/C * Termination: thin film technology * Gold plated or pre-tinned terminations over nickel barrier * Short circuits (jumpers) r < 50 mR, I < 2 A DIMENSIONS in millimeters [inches] A D D B C E E DIMENSION A B C D/E MAX. TOL. + 0.152 [+ 0.006] MIN. TOL. - 0.152 [- 0.006] MAX. TOL. + 0.127 [+ 0.005] MIN. TOL. - 0.127 [- 0.005] MAX. TOL. + 0.127 [+ 0.005] MIN. TOL. - 0.127 [- 0.005] MAX. TOL. + 0.13 [+ 0.005] MIN. TOL. - 0.13 [- 0.005] 0302 0.75 [0.029] 0.60 [0.023] 0.5 [0.02] 0402 1.00 [0.040] 0.60 [0.023] 0505 1.35 [0.053] 0603 CASE SIZE POWER RATING mW LIMITING ELEMENT VOLTAGE V RESISTANCE RANGE (2) Pn (1) Pd (1) 0.38 [0.015] 40 30 25 10 - 500 k 0.5 [0.02] 0.38 [0.015] 63 40 50 10 - 1 M 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 125 50 50 10 - 2.5 M 1.52 [0.060] 0.75 [0.030] 0.5 [0.02] 0.38 [0.015] 125 100 75 10 - 2.5 M 0705/0805 1.91 [0.075] 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 200 125 150 10 - 5 M 1005 2.54 [0.100] 1.27 [0.050] 0.5 [0.02] 0.38 [0.015] 250 125 75 10 - 5 M 1206 3.06 [0.120] 1.60 [0.063] 0.5 [0.02] 0.38 [0.015] 330 250 200 10 - 15 M 1505 3.81 [0.150] 1.32 [0.054] 0.5 [0.02] 0.38 [0.015] 350 175 75 10 - 10 M 2010 5.08 [0.200] 2.54 [0.100] 0.5 [0.02] 0.38 [0.015] 1000 500 300 10 - 50 M Notes (1) Pn = nominal power - Pd = derated power intended to improve stability (2) For ohmic range versus tolerance and TCR see detailed table page 2 * Pb containing terminations are not RoHS compliant, exemptions may apply ** Please see document "Vishay Green and Halogen-Free Definitions (5-2008)": http://www.vishay.com/doc?99902 www.vishay.com 60 For technical questions, contact: sfer@vishay.com Document Number: 53017 Revision: 14-Nov-08 P High Precision Wraparound - Wide Ohmic Value Range Vishay Sfernice Thin Film Chip Resistors ELECTRICAL SPECIFICATIONS TOLERANCE AND TCR VERSUS OHMIC VALUE Resistance Range: 10 to 50 M Resistance Tolerance: 0.1 % to 1 % 0.01 % to 0.05 % on Y type Power Dissipation: Pn: 40 mW to 1 W Pd: 40 mW to 500 mW on tolerance tighter than 0.05 % P0302 Temperature Coefficient: 5 ppm (0 C; 70 C); 10 ppm (- 55 C; + 155 C) CLIMATIC SPECIFICATIONS Operating Temp. Range: - 55 C to + 155 C P0402 For temperature up to 200 C, please consult factory MECHANICAL SPECIFICATIONS Substrate: Alumina Technology: Thin film Film: Nickel chromium with mineral passivation or CrSi Protection: Silicone Terminations: B type: SnPb over nickel barrier for solder reflow N type: SnAg over nickel barrier G type: gold over nickel barrier for other applications P0505 P0603 P0705/0805 TEMPERATURE COEFFICIENT TCR CODE FILM 5 ppm/C (1) Z NiCr 10 ppm/C (2) Y NiCr 25 ppm/C E NiCr 50 ppm/C H NiCr or CrSi 100 ppm/C K NiCr or CrSi Notes (1) Reduced operating range: 0 C; + 70 C option available for (- 25 C; + 85 C) (2) R > 50 on request for lower values P1005 P1206 Rated Power (%) POWER DERATING CURVE P1505 100 80 60 P2010 40 20 0 0 20 40 60 70 80 100 120 140 155 Ambient Temperature in C Document Number: 53017 Revision: 14-Nov-08 VALUE RANGE SIZE 10R - 500K 10R - 75K 39R - 75K 39R - 50K 100R - 50K 250R - 50K 10R - 1M 10R - 150K 39R - 150K 39R - 100K 100R - 100K 250R - 100K 10R - 2M5 10R - 300K 39R - 300K 39R - 260K 100R - 260K 250R - 260K 10R - 2M5 10R - 500K 39R - 500K 39R - 332K 100R - 332K 250R - 332K 10R - 5M 10R - 750K 39R - 750K 39R - 511K 100R - 511K 250R - 511K 10R - 5M 10R - 750K 39R - 750K 39R - 500K 100R - 500K 250R - 500K 10R - 15M 10R - 2M 39R - 2M 39R - 1M5 100R - 1M5 250R - 1M5 10R - 10M 10R - 1M 39R - 1M 39R - 750K 100R - 750K 250R - 750K 10R - 50M 10R - 6M 39R - 6M 39R - 3M 100R - 3M 250R - 3M TIGHTEST TOLERANCE % 0.1 0.1 0.05 0.05 0.02 0.01 0.1 0.1 0.05 0.05 0.02 0.01 0.1 0.1 0.05 0.05 0.02 0.01 0.1 0.1 0.05 0.05 0.02 0.01 0.1 0.1 0.05 0.05 0.02 0.01 0.1 0.1 0.05 0.05 0.02 0.01 0.1 0.1 0.05 0.05 0.02 0.01 0.1 0.1 0.05 0.05 0.02 0.01 0.1 0.1 0.05 0.05 0.02 0.01 BEST TCR (ppm/C) 50 25 25 10 (5) (3) 10 (5) (3) 10 (5) (3) 50 25 25 10 (5) (3) 10 (5) (3) 10 (5) (3) 50 25 25 10 (5) (3) 10 (5) (3) 10 (5) (3) 50 25 25 10 (5) (3) 10 (5) (3) 10 (5) (3) 50 25 25 10 (5) (3) 10 (5) (3) 10 (5) (3) 50 25 25 10 (5) (3) 10 (5) (3) 10 (5) (3) 50 25 25 10 (5) (3) 10 (5) (3) 10 (5) (3) 50 25 25 10 (5) (3) 10 (5) (3) 10 (5) (3) 50 25 25 10 (5) (3) 10 (5) (3) 10 (5) (3) Note (3) 5 ppm/C in a reduced operating range (0 C; + 70 C). Option available for operating range (- 25 C; + 85 C) upon request with price adder For technical questions, contact: sfer@vishay.com www.vishay.com 61 P Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors PACKAGING PACKAGING RULES ESD packaging available: waffle-pack, and plastic tape and reel (low conductivity). NUMBER OF PIECES PER PACKAGE SIZE MOQ WAFFLE PACK 2" x 2" TAPE AND REEL TAPE WIDTH MIN. MAX. 100 4000 8 mm 100 2000 8 mm (1) 0302 0402 0505 100 0603 0805 0705 100 1005 221 1206 140 1505 60 2010 Waffle Pack Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered exceeds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. To get "not stacked up" waffle pack in case of ordered quantity > maximum number of pieces per package: Please consult Vishay/Sfernice for specific ordering code Tape and Reel Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered is between the MOQ and the maximum reel capacity, only one reel is provided. When several reels are needed for ordered quantity within MOQ and maximum reel capacity: Please consult Vishay/Sfernice for specific ordering code Note (1) 12 mm on request PERFORMANCE Ta2N TESTS Thermal Shock Short Time Overload Low Temperature Operation Resistance to Solder Heat Moisture Resistance High Temperature Load Life CONDITIONS DRIFTS NiCr MIL-PRF-55342G requirements Typical performances MIL-PRF-55342G Typical performances MIL-PRF-55342G MIL-STD-202 F-Method 107 F 0.25 % 0.02 % 0.05 % 0.02 % MIL-PRF-55342G PARA 3.10.4.7.5 0.10 % 0.01 % 0.05 % 0.01 % MIL-PRF-55342G PARA 3.9 and 4.7.4 0.25 % 0.01 % 0.05 % 0.01 % MIL-PRF-55342G PARA 3.12, 4.7.7, 4.7.1.2 0.25 % 0.04 % 0.05 % 0.03 % MIL-PRF-55342G PARA 3.13 and 4.7.8 MIL-STD-202 F-Method 106 E 0.40 % 0.01 % 0.10 % 0.01 % MIL-PRF-55342G PARA 3.11 and 4.7.6 0.20 % 0.075 % 0.05 % 0.05 % MIL-PRF-55342G 2000 h Pn at 70 C MIL-STD-202 F-Method 108 A 0.50 % 0.15 % 0.5 % 0.10 % (2) Note (2) 0.05 % under Pd www.vishay.com 62 For technical questions, contact: sfer@vishay.com Document Number: 53017 Revision: 14-Nov-08 P High Precision Wraparound - Wide Ohmic Value Range Vishay Sfernice Thin Film Chip Resistors GLOBAL PART NUMBER INFORMATION New Global Part Numbering: P0505Y1003BBT0933 P 0 5 GLOBAL MODEL P 0 5 Y 1 0 0 3 B B SIZE TCR VALUE TOLERANCE 0302 0402 0505 0603 0705 0805 1005 1206 1505 2010 K = 100 ppm/C H = 50 ppm/C E = 25 ppm/C Y = 10 ppm/C X = Jumper Z = 5 ppm (0.70 C) The first three digits (2 digits are enough for tolerance G and J) are significant figures and the last digit specifies the number of zeros to follow, R designates decimal point L = 0.01 % P = 0.02 % W = 0.05 % B = 0.1 % C = 0.25 % D = 0.5 % F=1% G=2% J=5% S = Special X = Jumper 10R0 = 10 3901 = 3900 1004 = 1 M 0R00 = Jumper T 0 9 3 TERMINATION PACKAGING B: SnPb over nickel barrier N: SnAg over nickel barrier G: Gold over nickel barrier blank = Waffle pack T = Tape (1) 3 OPTION Leave blank if no option B: Lead bearing version N and G: Lead (Pb)-free/ RoHS version Historical Part Number example: P 0505 Y 1003 B B TR R0933 e2 P 0505 Y 1003 B HISTORICAL MODEL SIZE TCR VALUE TOLERANCE P 0302 0402 0505 0603 0705 0805 1005 1206 1505 2010 K = 100 ppm/C H = 50 ppm/C E = 25 ppm/C Y = 10 ppm/C X = Jumper Z = 5 ppm (0.70 C) The first three digits (2 digits are enough for tolerance G and J) are significant figures and the last digit specifies the number of zeros to follow, R designates decimal point 10R0 = 10 3901 = 3900 1004 = 1 M 0R00 = Jumper L = 0.01 % P = 0.02 % W = 0.05 % B = 0.1 % C = 0.25 % D = 0.5 % F=1% G=2% J=5% S = Special X = Jumper B TR TERMINATION PACKAGING B: SnPb over nickel barrier N: SnAg over nickel barrier G: Gold over nickel barrier R0933 e2 OPTION RoHS blank = Leave blank Waffle pack if no option TR = Tape (1) e2: Tin/silver e4: Gold blank: SnPb B: Lead bearing version N and G: Lead (Pb)-free/ RoHS version Note * Chips ready to be trimmed available. (Ptrim) - Please consult Sfernice. (1) For specific quantity of parts per packaging please consult Sfernice Document Number: 53017 Revision: 14-Nov-08 For technical questions, contact: sfer@vishay.com www.vishay.com 63 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1