Current
20.0 A
Voltage
100 to 200 V
MECHANICAL DATA
Ideal for automated placement
Low forward voltage drop
Low power losses, high efficiency
TYPICAL APPLICATIONS
Used in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, dc-to-dc converters
or polarity protection application.
FEATURES
High forward surge current capability
Solder dip 260ºC, 10s
Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Meets MSL level 1, per J-STD-020, LF maximum
peak of 260º C
Guardring for overvoltage protection
4
1
2
3
PIN 1
PIN 3 CASE
PIN 4
Maximun Ratings and Electrical Characteristics at 25°C
Electrical Characteristics at Tamb = 25 °C
Low leakage current
High frequency operation
TO-263AB / D2PAK
Notes: 1. Pulse Test: 300µ Pulse Width, 1% Duty Cycle
MBRS20HCTC
20.0 Amp. Surface Mount High Temperature Technology Schottky Rectifier
V
F
I
R
R
thj-c
Maximum Typical Thermal Resistance (Note 2)
0.85 V
1.5 °C/W
Maximum Instantaneous Forward Voltage at
(Note 1) IF = 10 A, Tj = 25 °C
I
F
= 10 A, Tj = 125 °C
I
F
= 20 A, Tj = 25 °C
I
F
= 20 A, Tj = 125 °C
2.0 mA
0.75 V
0.95 V
0.85 V
0.88 V
0.75 V
0.97 V
0.85 V
Max. Instantaneous Reverse Current @ Tj=25°C
at Rated DC Blocking Voltage
(Note 3)
@ Tj=125°C
5 µA
20 A
150 A
65 to + 175 °C
100
70
100
MBRS
20H100CTC
MBRS
20H150CTC
MBRS
20H200CTC
150
105
150
200
140
200
Maximum RMS Voltage (V)
Maximum DC Blocking Voltage (V)
Maximum Average Forward Rectified Current
at T
C
=125°C
V
RRM
V
RMS
V
DC
I
F (AV)
T
j
T
stg
Operating Junction Temperature Range
Storage Temperature Range
I
FSM
Peak Forward Surge Current, 8.3 ms Single Half
sine-wave Superimposed on Rated Load
(JEDEC Method)
I
RRM
Peak Repetitive Reverse Surge Current
1.0 A 0.5 A
65 to + 175 °C
Marking Code
MBRS20H100CTC MBRS20H150CTC MBRS20H200CTC
www.fagorelectronica.com
Document Name: mbrs20hctc Version: Nov-11
Page Number: 1/5
Case:
TO-263AB / D2PAK molded plastic.
Epoxy meets UL 94V-0 flammability rating.
Polarity: As marked
Terminals:
Matte tin plated leads, solderable per
MIL-STD-750 Method 2026, J-STD-002 and JESD22-B102.
Consumer grade, meets JESD 201 class 1A whisker test.
HE3 suffix for high reliability grade (AEC Q101 qualified),
meets JESD 201 class 2 whisker test.
2. Thermal Resistance from Junction to Case per diode
3. Pulse test: Pulse width £ 40ms
Maximum Recurrent Peak Reverse Voltage (V)
Ordering information
Package Outline Dimensions
:
(mm)
TO-263AB / D2PAK
Marking code
Mounting Pad Layout
MBRS20HCTC
20.0 Amp. Surface Mount High Temperature Technology Schottky Rectifier
TR 13" diameter tape and reel 800 1.45
MBRS20H150CTC 00TRC
MBRS20H150CTC 00 HE3 TRC
MBRS20H150CTC 00TUC
TR
TU
MBRS20H150CTC 00 HE3 TUC TU
TUBE 1000 1.45
13" diameter tape and reel 800 1.45
TUBE 1000 1.45
www.fagorelectronica.com
Document Name: mbrs20hctc Version: Nov-11
Page Number: 2/5
PREFERRED P/N PACKAGE CODE DELIVERY MODE BASE QUANTITY UNIT WEIGHT (g)
4.7
4.10
1.4
1.14
1.65 MAX..
9.25
8.25
2.79
1.78
0.53
0.36
2.79
2.03
0.94
0.68
2.67
2.41
10.5 MAX.
15.88
14.6
8.38 MIN.
10.66 MIN.
2.032 MIN.
3.81 MIN.
17.02
15.00
2.67
2.41
4.7
4.10
MC
Week code
Year code
WWY
Ratings and Characteristics (Ta 25 ºC unless otherwise noted)
MBRS20HCTC
20.0 Amp. Surface Mount High Temperature Technology Schottky Rectifier
VF, forward voltage (V)
IF, instantaneous forward current (A)
0 50 100 150
TC, case temperature (ºC)
IFSM, peak forward surge current (A)
MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT PER DIODE
TYPICAL JUNCTION CAPACITANCE
PER DIODE
Number of cycles at 60 Hz.
TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER DIODE FORWARD CURRENT DERATING CURVE
IF(AV), average forward current (A)
20
16
12
8
4
0
1
0.01
10
0.3 0.4 0.50 0.1 0.2 0.6 1.2
100
125
75
50
150
25
10 100
0
25 75 125 175
40
0.1
1
1.11.00.90.80.7
10 100
VR, reverse voltage (V)
Cj, junction capacitance (pF)
10.1
1000
5000
100
Tj = 25 °C
f = 1.0 MHz
Vsig = 50mVp-p
500
200
2000
www.fagorelectronica.com
Document Name: mbrs20hctc Version: Nov-11
Page Number: 3/5
PULSE WIDTH = 300 µs
1% DUTY CYCLE
RESISTIVE OR
INDUCTIVE LOAD
T
j
= 25 °C
T
j
= 125 °C
Tj = Tj max.
8.3ms Single Half Sine-Wave
(JEDEC Method)
Ratings and Characteristics (Ta 25 ºC unless otherwise noted)
MBRS20HCTC
20.0 Amp. Surface Mount High Temperature Technology Schottky Rectifier
5
1
0.01
0.0001
TYPICAL REVERSE CHARACTERISTICS
PER DIODE
IR, instantaneous reverse current (mA)
Transient thermal impedance (°C/W)
t, Pulse durantion (sec.)
0 20 120 14010080
Percent of rated peak reverse voltage (%)
0.1
1
100
0.01 0.1 1 10 100
10
TYPICAL TRANSIENT THERMAL
IMPEDANCE
PER DIODE
0.1
40 60
0.001
www.fagorelectronica.com
Document Name: mbrs20hctc
Version: Nov-11
Page Number: 4/5
T
j
= 75 °C
T
j
= 125 °C
T
j
= 25 °C
Disclaimer
MBRS20H100CT ....... MBRS20H200CT
20.0 Amp. Surface Mount High Temperature Technology Schottky Rectifier
www.fagorelectronica.com
Document Name: mbrs20hctc Version: Nov-11
Page Number: 5/5
All product, product specifications and data are subject to change without notice to improve reliability,
function or design or otherwise.
Fagor Electrónica, S.Coop., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, "Fagor"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained
in any datasheet or in any other disclosure relating to any product.
Fagor makes no warranty, representation or guarantee regarding the suitability of the products for any particular
purpose or the continuing production of any product. To the maximum extent permitted by applicable law,
Fagor disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all
liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Fagor's knowledge
of typical requirements that are often placed on Fagor products in generic applications. Such statements are not
binding statements about the suitability of products for a particular application. It is the customer's responsibility
to validate that a particular product with the properties described in the product specification is suitable for use in a
particular application. Parameters provided in datasheets and/or specifications may vary in different applications
and performance may vary over time. All operating parameters, including typical parameters, must be validated
for each customer application by the customer's technical experts. Product specifications do not expand or
otherwise modify Fagor's terms and conditions of purchase, including but nos limited to the warranty expressed
therein.
Except as expressly indicated in writing. Fagor products are not designed for use in medical, life-saving, or
life-sustaining applications or for any other application in which the failure of the Fagor product could result in
personal injury or death. Customers using or selling Fagor products not expressly indicated for use in such
applications do so at their own risk and agree to fully indemnify and hold Fagor and its distributors harmless from
and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use
or sale, including attomeys fees, even if such claim alleges that Fagor or its distributor was negligent regarding
the design or manufacture of the part. Please contact authorized Fagor personnel to obtain written terms and
conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Fagor, Product names and markings noted herein may be trademarks of their
respective owners.
