Document Number: 60024 For technical questions, contact: thinfilm@vishay.com www.vishay.com
Revision: 25-Aug-10 81
Precision Automotive Thin Film Chip Resistors,
AEC-Q200 Qualified, 2 kV ESD Rating
PAT
Vishay Thin Film
These chip resistors are available in wraparound
terminations styles in 8 case sizes. They incorporate self
passivated enhanced tantalum nitride resistor film to give
superior performance on moisture resistance, electrostatic
discharge, voltage coefficient, power handling and
resistance stability. The terminations consist of an adhesion
layer, a leach resistant nickel barrier, and solder coating
(lead (Pb)-free). This product will out-perform all
requirements of AEC-Q200.
CONSTRUCTION
FEATURES
• Resistance range: 10 Ω to 3 MΩ
• AEC-Q200 qualified
• AEC-Q200 ESD rated class 1C (2 kV)
• Laser trimmed to any value
• Moisture resistant to MIL-STD-202, method 202
• Tantalum nitride resistor film on high purity alumina
substrate
• 100 % visual inspected per MIL-PRF-55342
• Laser-trimmed tolerances to ± 0.1 %
• Load life stability < 0.05 % at 1000 h at 70 °C
• Very low noise and voltage coefficient
(< - 30 dB, < 0.1 ppm/V)
• Compliant to RoHS directive 2002/95/EC
TYPICAL PERFORMANCE
Adhesion Layer
High Purity
Alumina Substrate
Nickel Barrier
Solder
Coating
Passivation
T antalum Nitride
Resistive Film
ABSOLUTE
TCR 25
TOL. 0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Tantalum nitride -
Resistance Range 10 Ω to 3 MΩ-
TCR: Absolute ± 25 ppm/°C to ± 100 ppm/°C - 55 °C to + 125 °C
Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 °C
Stability: Absolute ± 0.05 % 2000 h at 70 °C rated power
Stability: Ratio Not applicable -
Voltage Coefficient Less than 0.1 ppm/V -
Working Voltage 75 V to 200 V -
Operating Temperature Range - 55 °C to + 150 °C -
Storage Temperature Range - 55 °C to + 150 °C -
Noise < - 30 dB -
Shelf Life Stability: Absolute 100 ppm 1 year at 25 °C
COMPONENT RATINGS
CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE (Ω)
0402 50 75 20 to 35K
0603 150 75 10 to 80K
0805 200 100 10 to 301K
1206 400 200 10 to 1M
1505 400 150 10 to 1M
2208 750 150 10 to 1.75M
2010 800 200 10 to 2M
2512 1000 200 10 to 3M
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
www.vishay.com For technical questions, contact: thinfilm@vishay.com Document Number: 60024
82 Revision: 25-Aug-10
PAT
Vishay Thin Film Precision Automotive Thin Film Chip Resistors,
AEC-Q200 Qualified, 2 kV ESD Rating
Note
(1) Preferred packaging code
DIMENSIONS in inches
CASE SIZE L W T D E
0402 0.042 ± 0.008 0.022 ± 0.005 0.015 ± 0.003 0.010 ± 0.005 0.010 ± 0.005
0603 0.064 ± 0.006 0.032 ± 0.005 0.015 ± 0.003 0.012 ± 0.005 0.015 ± 0.005
0805 0.080 ± 0.006 0.050 ± 0.005 0.015 ± 0.003 0.015 ± 0.005 0.015 ± 0.005
1206 0.126 ± 0.008 0.063 ± 0.005 0.015 ± 0.003 0.020 + 0.005, - 0.010 0.020 + 0.005, - 0.010
1505 0.155 ± 0.007 0.050 ± 0.005 0.015 ± 0.003 0.015 ± 0.005 0.015 ± 0.005
2010 0.209 ± 0.009 0.098 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005
2208 0.230 ± 0.007 0.075 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005
2512 0.259 ± 0.009 0.124 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.020 ± 0.005
ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements)
ENVIRONMENTAL TEST CONDITIONS LIMITS
PER AEC-Q200
TYPICAL VISHAY
PERFORMANCE
Resistance Temperature Characteristic - 55 °C to + 125 °C ± 50 ppm/°C ± 35 ppm/°C
Max. Ambient Temp. at Rated Wattage + 70 °C + 70 °C
Max. Ambient Temp. at Power Derating + 150 °C + 150 °C
High Temperature Storage ΔRMIL-STD-202, 108, 1000 h at 125 °C ± 0.1 % + 0.016 %
Temperature Cycling ΔRJESD22, JA-104, 1000 cycles, - 55 °C to + 125 °C ± 0.15 % + 0.013 %
Moisture Resistance ΔRMIL-STD-202, 106 ± 0.20 % + 0.0010 %
Biased Humidity ΔRMIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P ± 0.10 % + 0.0297 %
Life ΔRMIL-STD-202, 108 at 125 °C, 1000 h ± 0.1 % + 0.0220 %
Mechanical Shock ΔRMIL-STD-202, method 213, condition C ± 0.1 % + 0.0130 %
Vibration ΔRMIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.1 % + 0.0030 %
Resistance to Soldering Heat ΔRMIL-STD-202, 204, condition B ± 0.10 % + 0.0150 %
Electrostatic Discharge ΔRAEC-Q200-002 at 2 kV, human body ± 0.10 % - 0.032 %
Solderability Visual J-STD-002, method B and B1 95 % Acceptable
Terminal Strength ΔRAEC-Q200-006 at 1 kg for 60 s ± 0.10 % + 0.012 %
Flame Retardance Visual AEC-Q200-001 para 4.0 Acceptable
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PAT1206E1002BST1
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING
PAT 0402
0603
0805
1206
1505
2010
2208
2512
E = ± 25 ppm/°C
H = ± 50 ppm/°C
K = ± 100 ppm/°C
The first 3 digits are
significant figures
and the last digit
specifies the number
of zeros to follow.
“R” designates the
decimal point.
Example:
10R0 = 10 Ω
1000 = 100 Ω
1002 = 10 kΩ
B = ± 0.1 %
D = ± 0.5 %
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
S = Wraparound
lead (Pb)-free
solder
w/nickel barrier
TAPE AND REEL
T1 = 1000 min., 1000 mult (1)
TF = Full reel
TS = 100 min., 1 mult
D
L
E
T
W
L
DT
06E1 02B01 ST1TPA 2
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
