PAT Vishay Thin Film Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kV ESD Rating FEATURES * Resistance range: 10 to 3 M * AEC-Q200 qualified * AEC-Q200 ESD rated class 1C (2 kV) These chip resistors are available in wraparound terminations styles in 8 case sizes. They incorporate self passivated enhanced tantalum nitride resistor film to give superior performance on moisture resistance, electrostatic discharge, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating (lead (Pb)-free). This product will out-perform all requirements of AEC-Q200. CONSTRUCTION Passivation * Laser trimmed to any value * Moisture resistant to MIL-STD-202, method 202 * Tantalum nitride resistor film on high purity alumina substrate * 100 % visual inspected per MIL-PRF-55342 * Laser-trimmed tolerances to 0.1 % * Load life stability < 0.05 % at 1000 h at 70 C * Very low noise and voltage coefficient (< - 30 dB, < 0.1 ppm/V) * Compliant to RoHS directive 2002/95/EC TYPICAL PERFORMANCE Tantalum Nitride Resistive Film ABSOLUTE Solder Coating Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Tantalum nitride 10 to 3 M 25 ppm/C to 100 ppm/C 0.1 % to 1.0 % 0.05 % Not applicable Less than 0.1 ppm/V 75 V to 200 V - 55 C to + 150 C - 55 C to + 150 C < - 30 dB 100 ppm CONDITIONS - 55 C to + 125 C + 25 C 2000 h at 70 C rated power 1 year at 25 C COMPONENT RATINGS CASE SIZE 0402 0603 0805 1206 1505 2208 2010 2512 POWER RATING (mW) 50 150 200 400 400 750 800 1000 WORKING VOLTAGE (V) 75 75 100 200 150 150 200 200 RESISTANCE RANGE () 20 to 35K 10 to 80K 10 to 301K 10 to 1M 10 to 1M 10 to 1.75M 10 to 2M 10 to 3M ** Please see document "Vishay Material Category Policy": www.vishay.com/doc?99902 Document Number: 60024 Revision: 25-Aug-10 For technical questions, contact: thinfilm@vishay.com www.vishay.com 81 PAT Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kV ESD Rating Vishay Thin Film DIMENSIONS in inches D T D W T E L L CASE SIZE 0402 0603 0805 1206 1505 2010 2208 2512 L 0.042 0.008 0.064 0.006 0.080 0.006 0.126 0.008 0.155 0.007 0.209 0.009 0.230 0.007 0.259 0.009 W 0.022 0.005 0.032 0.005 0.050 0.005 0.063 0.005 0.050 0.005 0.098 0.005 0.075 0.005 0.124 0.005 T 0.015 0.003 0.015 0.003 0.015 0.003 0.015 0.003 0.015 0.003 0.015 0.003 0.015 0.003 0.015 0.003 D E 0.010 0.005 0.010 0.005 0.012 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.020 + 0.005, - 0.010 0.020 + 0.005, - 0.010 0.015 0.005 0.015 0.005 0.020 0.005 0.020 0.005 0.020 0.005 0.020 0.005 0.020 0.005 0.020 0.005 ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) LIMITS TYPICAL VISHAY PER AEC-Q200 PERFORMANCE Resistance Temperature Characteristic - 55 C to + 125 C 50 ppm/C 35 ppm/C Max. Ambient Temp. at Rated Wattage + 70 C + 70 C Max. Ambient Temp. at Power Derating + 150 C + 150 C High Temperature Storage R MIL-STD-202, 108, 1000 h at 125 C 0.1 % + 0.016 % Temperature Cycling R JESD22, JA-104, 1000 cycles, - 55 C to + 125 C 0.15 % + 0.013 % Moisture Resistance R MIL-STD-202, 106 0.20 % + 0.0010 % Biased Humidity R MIL-STD-202, 103, 1000 h at 85 C, 85 % RH, 10 % P 0.10 % + 0.0297 % Life R MIL-STD-202, 108 at 125 C, 1000 h 0.1 % + 0.0220 % Mechanical Shock R MIL-STD-202, method 213, condition C 0.1 % + 0.0130 % Vibration R MIL-STD-202 method 204, 10 Hz to 2 kHz 0.1 % + 0.0030 % Resistance to Soldering Heat R MIL-STD-202, 204, condition B 0.10 % + 0.0150 % Electrostatic Discharge R AEC-Q200-002 at 2 kV, human body 0.10 % - 0.032 % Solderability Visual J-STD-002, method B and B1 95 % Acceptable Terminal Strength R AEC-Q200-006 at 1 kg for 60 s 0.10 % + 0.012 % Flame Retardance Visual AEC-Q200-001 para 4.0 Acceptable ENVIRONMENTAL TEST CONDITIONS GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PAT1206E1002BST1 P A T 1 2 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PAT 0402 0603 0805 1206 1505 2010 2208 2512 E = 25 ppm/C H = 50 ppm/C K = 100 ppm/C 0 6 E 1 0 RESISTANCE TOLERANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. "R" designates the decimal point. B = 0.1 % D = 0.5 % F = 1.0 % G = 2.0 % J = 5.0 % 0 2 TERMINATION S = Wraparound lead (Pb)-free solder w/nickel barrier B S T 1 PACKAGING TAPE AND REEL T1 = 1000 min., 1000 mult (1) TF = Full reel TS = 100 min., 1 mult Example: 10R0 = 10 1000 = 100 1002 = 10 k Note (1) Preferred packaging code www.vishay.com 82 For technical questions, contact: thinfilm@vishay.com Document Number: 60024 Revision: 25-Aug-10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1