ALUMINUM ELECTROLYTIC CAPACITORS UJ Chip Type, Higher Capacitance Range series Chip Type, higher capacitance in larger case sizes (12.5, 16, 18, 20) Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape and tray. Compliant to the RoHS directive (2002/95/EC). UH High Temperature UJ UN Bi-Polarized Specifications Item Performance Characteristics - 55 to +105C (6.3 to 100V), - 40 to +105C (160 to 450V) 6.3 to 450V 3.3 to 6800F 20% at 120Hz, 20C Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Rated voltage (V) Leakage Current 6.3 to 100 160 to 450 After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (A), whichever is greater. -- I = 0.04CV+100 ( A) max. (1 minute's) Measurement frequency : 120Hz, Temperature : 20C Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 6.3 0.26 10 0.22 16 0.18 25 0.16 35 0.14 50 0.12 63 0.10 100 0.08 160 to 250 400 * 450 0.20 0.15 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency: 120Hz Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C Stability at Low Temperature 6.3 5 10 The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 5000 hours at 105C. Endurance 50 2 3 35 2 3 25 2 4 16 3 6 10 4 8 Capacitance change tan Leakage current 100 2 3 63 2 3 160 to 250 400 * 450 3 6 6 10 Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Black print on the case top. Type numbering system (Example : 50V 330F) Chip Type Capacitance Series 0.5 MAX. Positive A 0.2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 U U J 1 H 3 3 1 M NQ 1 MS Package code E A 0.2 Pressure relief vent B 0.2 D 0.5 nichicon 330 F UJ 50V H1015 Trade mark C 0.2 Plastic platform 0.3 MAX. Voltage Lot No. L 1.0 H Negative Taping MS Tray ZD Size code Configuration Capacitance Tolerance (20%) D Rated capacitance (330F) 12.5 to 18 20 Rated voltage (50V) Code NQ RQ Series name (mm) Type D 12.5x13.5 12.5x16. 12.5x21. 16x16.5. 16x21.5. 18x16.5. 18x21.5. 20x16.5. 20x 21.5. 4.8 4.8 4.8 5.4 5.4 6.4 6.4 6.2 6.2 A 13.6 13.6 13.6 17.1 17.1 19.1 19.1 21.1 21.1 B 13.6 13.6 13.6 17.1 17.1 19.1 19.1 21.1 21.1 C 4.0 4.0 4.0 6.3 6.3 6.3 6.3 8.8 8.8 E 13.5 16.0 21.0 16.5 21.5 16.5 21.5 16.5 21.5 L H 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.3 to 1.7 1.3 to 1.7 Dimension table in next page. CAT.8100A ALUMINUM ELECTROLYTIC CAPACITORS UJ series Dimensions V (F) Cap. 6.3 0J Code 10 1A 16 1C 25 1E 35 1V 50 1H 12.5 x 13.5 280 12.5 x 16.0 320 12.5 x 13.5 320 12.5 x 16.0 360 16 x 16.5 440 220 221 330 331 470 471 1000 102 12.5 x 13.5 440 12.5 x 16.0 2200 222 16 x 16.5 750 3300 332 18 x 16.5 4700 472 18 x 21.5 6800 682 20 x 21.5 1350 V 63 100 160 200 250 400 1J 2A 2C 2D 2E 2G (F) Cap. Code 3.3 3R3 4.7 4R7 12.5 x 13.5 360 12.5 x 16.0 400 16 x 16.5 490 18 x 16.5 550 500 16 x 16.5 630 18 x 16.5 700 18 x 16.5 750 18 x 21.5 820 16 x 16.5 810 18 x 16.5 930 18 x 21.5 1050 20 x 21.5 1150 930 18 x 16.5 1000 18 x 21.5 1150 1100 18 x 21.5 1200 20 x 21.5 1450 450 2W 12.5 x 13.5 40 50 12.5 x 13.5 65 12.5 x 16.0 50 12.5 x 16.0 10 100 12.5 x 13.5 80 12.5 x 16.0 105 16 x 16.5 85 16 x 16.5 85 22 220 12.5 x 16.0 105 16 x 16.5 180 18 x 21.5 130 18 x 21.5 130 33 330 20 x 21.5 160 20 x 21.5 160 47 470 12.5 x 13.5 95 16 x 16.5 220 18 x 16.5 230 12.5 x 13.5 160 16 x 16.5 260 18 x 16.5 270 18 x 21.5 280 20 x 21.5 340 68 680 12.5 x 13.5 175 12.5 x 16.0 205 18 x 16.5 320 18 x 21.5 330 100 101 12.5 x 16.0 225 16 x 16.5 285 16 x 21.5 380 20 x 21.5 410 220 221 16 x 16.5 385 18 x 16.5 440 330 331 18 x 16.5 490 20 x 21.5 500 470 471 18 x 21.5 590 Case size D x L (mm) Size 12.5 x 21 is available for capacitors marked," ". Size 16 x 21.5L is available for capacitors marked," ". Size 20 x 16.5L is available for capacitors marks," ". In this case, 6 will be put at 12th digit of type numbering system. Rated ripple Rated ripple current (mArms) at 105C 120Hz Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(F) Frequency 47 to 680/ 100 to 4700 1000 to 6800 3.3 to 100 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1kHz 1.57 1.34 1.13 1.40 10kHz or more 2.00 1.50 1.15 1.60 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100A