ILLUMINATION
DS061 LUXEON Rebel ES Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved.
RoHS
COMPLIANT
LUXEON Rebel ES is a high ux LED that gives you the exibility you
need to design luminaires and lamps for outdoor and industrial lighting
applications and bring them to market. Tested and binned at 700mA,
condently design LUXEON Rebel ES into high lumen applications or
create more energy ecient devices using the same emitter. Luminaire
manufacturers and designers count on LUXEON Rebel ES for quality,
reliability and in-device performance.
LUXEON Rebel ES
High value and easy design-in
FEATURES AND BENEFITS PRIMARY APPLICATIONS
High lm/$ for cost competitive applications High Bay & Low Bay
Broad portfolio of emitters for indoor and outdoor applications Outdoor
CCT and CRI combinations to support a wide range of applications Specialty Lighting
Extensive applications ecosystem for easy design-in and quick ROI
LM-80 test report available
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. i
Table of Contents
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Product Nomenclature ...................................................................................2
Average Lumen Maintenance Characteristics ..............................................................3
Environmental Compliance ...............................................................................3
Product Selection Guide .....................................................................................4
Optical Characteristics .......................................................................................4
Electrical Characteristics .....................................................................................5
Absolute Maximum Ratings ..............................................................................6
JEDEC Moisture Sensitivity ...............................................................................6
Reow Soldering Characteristics..............................................................................7
Mechanical Dimensions .....................................................................................8
Pad Conguration ...........................................................................................9
Solder Pad Design...........................................................................................9
Relative Spectral Distribution vs. Wavelength Characteristics...................................................10
Typical Light Output Characteristics..........................................................................12
Typical Forward Current Characteristics ......................................................................12
Typical Luminous Ecacy...................................................................................13
Current Derating Curves.....................................................................................15
Typical Radiation Pattern ...................................................................................17
Emitter Pocket Tape Packaging..............................................................................18
Emitter Reel Packaging .....................................................................................19
Product Binning and Labeling .............................................................................. 20
Luminous Flux Bins.........................................................................................21
LUXEON Rebel ES ANSI 1/4th Quadrant Bin Structure .........................................................25
Forward Voltage Bins ...................................................................................... 26
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 2
General Information
Product Nomenclature
LUXEON Rebel ES is tested and binned at 700mA, with current pulse duration of 20 ms. All characteristic charts
where the thermal pad is kept at constant temperature (25°C typically) are measured with current pulse duration of
20 ms. Under these conditions, junction temperature and thermal pad temperature are the same.
The LUXEON Rebel ES family of emitters contain a series of LEDs designed for Illumination applications.
The part number designation for the LXML series is explained as follows:
L X M L - A B C D
Where:
A — designates radiation pattern (value P for Lambertian)
B — designates color (W for White)
C — designates color variant (C for Cool-White, N for Neutral-White)
D — designates test current (value 2 for 700mA)
The part number designation for the LXH7 series is explained as follows:
L X H A - B C D E
Where:
A — designates minimum CRI performance (value 7 = 70 minimum)
B — designates radiation pattern (value P for Lambertian)
C — designates color (value W = White)
D & E — designates nominal ANSI CCT (value 40 = 4000K))
Therefore products tested and binned at 700mA follow the part numbering scheme:
L X M L - P W x 2 and L X H 7 - P W x x
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 3
Average Lumen Maintenance Characteristics
Lumen maintenance for solid state lighting devices (LEDs) is typically dened in terms of the percentage of initial
light output remaining after a specied period of time. Lumileds projects that LUXEON Rebel ES products will
deliver, on average, 70% lumen maintenance (L70) at 50,000 hours of operation at a forward current of 1000mA.
This projection is based on constant current operation with junction temperature maintained at or below 135°C. This
performance is based on independent test data, Lumileds historical data from tests run on similar material systems,
and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to
achieve this projected lumen maintenance.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON
Rebel ES is compliant to the European Union directives on the restriction of hazardous substances in electronic
equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not
intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium,
polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 4
Product Selection Guide for LUXEON Rebel ES
Thermal Pad Temperature = 25°C
Table 1.
Performance at Test Current (700mA)
Nominal
CCT/Color
Part
Number
Minimum
CRI
Typical
CRI
Min Luminous
Flux (lm) [1]
4100K Neutral White LXML-PWN2 60 65 200
5650K Cool White LXML-PWC2 60 70 200
4000K LXH7-PW40 70 75 180
Note for Table 1:
1. Minimum luminous ux performance within published operating conditions. Lumileds maintains a tolerance of ± 6.5% on luminous ux measurements and ± 2 on
CRI measurements..
Typical Luminous Flux Characteristics at 350mA, 700mA and 1000mA for
LUXEON Rebel ES, Thermal Pad Temperature = 25°C
Table 2.
Nominal
CCT/Color
Part
Number
Typical Luminous Flux (lm)
@ 350mA Forward Current [1]
Typical Luminous Flux (lm)
@ 700mA Forward Current [1]
Typical Luminous Flux (lm)
@ 1000mA Forward Current [1]
4100K Neutral White LXML-PWN2 130 230 310
5650K Cool White LXML-PWC2 135 235 320
4000K LXH7-PW40 114 205 279
Note for Table 2:
1. Typical luminous ux performance within published operating conditions. Lumileds maintains a tolerance of ± 6.5% on luminous ux measurments.
Optical Characteristics for LUXEON Rebel ES at Test Current [1]
Thermal Pad Temperature = 25°C
Table 3.
Part Number Nominal
CCT
Color Temperature CCT Typ Total
Included Angle [2]
u0.90V
Typ Viewing
Angle [3]
2u 1/2
Minimum Typical Maximum
LXML-PWN2 4100K Neutral White 3500K 4100K 4500K 160°120°
LXML-PWC2 5650K Cool White 4500K 5650K 10000K 160°120°
LXH7-PW40 4000K 3710K 3985K 4260K 160°120°
Notes for Table 3:
1. Test current is 700mA for all LXML-PWx2 and LXH7-PWxx emitters.
2. Total angle at which 90% of total luminous ux is captured.
3. Viewing angle is the o axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 5
Electrical Characteristics at 700mA for LUXEON Rebel ES
Thermal Pad Temperature = 25°C
Table 4.
Part Number Nominal
CCT/Color
Forward Voltage Vf [1] (V) Typ. Temperature
Coecient
of Forward Voltage [2]
(mV/°C)
DVf / DTJ
Typical Thermal
Resistance
Junction to Thermal
Pad (°C/W)
Ru J-C
Minimum Typical Maximum
LXML-PWN2 4100K Neutral White 2.5 2.90 3.25 -2.0 to -4.0 6
LXML-PWC2 5650K Cool White 2.5 2.90 3.25 -2.0 to -4.0 6
LXH7-PW40 4000K 2.5 2.90 3.25 -2.0 to -4.0 6
Notes for Table 4:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C = TJ = 110°C at If = 700mA.
Typical Electrical Characteristics at 350mA, 700mA and
1000mA for LUXEON Rebel ES
Thermal Pad Temperature = 25°C
Table 5.
Nominal
CCT/Color Part Number
Typical Forward Voltage
Vf (V) @ 350mA
Forward Current
Typical Forward Voltage
Vf (V) @ 700mA
Forward Current
Typical Forward Voltage
Vf (V) @ 1000mA
Forward Current
4100K Neutral White LXML-PWN2 2.75 3.00 3.10
5650K Cool White LXML-PWC2 2.75 3.00 3.10
4000K LXH7-PW40 2.75 3.00 3.10
Notes for Table 5:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 6
Absolute Maximum Ratings
Table 6.
Parameter LUXEON Rebel ES
DC Forward Current (mA) 1000 [2]
Peak Pulsed Forward Current (mA) 1200 [3]
ESD Sensitivity < 8000V Human Body Model (HBM)
Class 3A JESD22-A114-E
LED Junction Temperature [1] 150°C
Operating Case Temperature at 700mA -40°C - 135°C
Storage Temperature -40°C - 135°C
Soldering Temperature JEDEC 020c 260°C
Allowable Reow Cycles 3
Reverse Voltage (Vr) LUXEON Rebel ES LEDs are not designed to be driven in reverse bias
Notes for Table 6:
1. Proper current derating must be observed to maintain junction temperature below the maximum. For additional information on thermal measurement guidelines please refer to Application
Brief AB33.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple’, with frequencies ≥ 100 Hz and amplitude ≤ 200mA are acceptable,
assuming the average current throughout each cycle does not exceed 1000mA.
3. Pulsed operation with a peak drive current of 1200mA is acceptable if the pulse on-time is ≤ 5 ms per cycle and the duty cycle is ≤ 50%.
JEDEC Moisture Sensitivity
Table 7.
Level Floor Life Soak Requirements
Standard
Time Conditions Time Conditions
1 unlimited [ 30°C /
85% RH
168h
+ 5 / - 0
85°C / 85%
RH
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 7
Reow Soldering Characteristics
Temperature prole for Table 8.
Table 8.
Prole Feature Lead Free Assembly
Average Ramp-Up Rate (Tsmax to Tp) 3°C / second max
Preheat Temperature Min (Tsmin) 150°C
Preheat Temperature Max (Tsmax) 200°C
Preheat Time (tsmin to tsmax) 60 - 180 seconds
Temperature (TL) 217°C
Time Maintained Above Temperature (TL) 60 - 150 seconds
Peak / Classication Temperature (TP) 260°C
Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds
Ramp - Down Rate 6°C / second max
Time 25°C to Peak Temperature 8 minutes max
Notes for Table 8:
1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
2. For additional information on thermal measurement guidelines please refer to Application Brief AB33.
JEDEC
020c
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 8
Mechanical Dimensions
Notes for Figure 1:
1. Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens.
2. Drawings not to scale.
3. All dimensions are in millimeters.
4. The thermal pad is electrically isolated from the anode and cathode contact pads.
Figure 1. Package outline drawing.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 9
Pad Conguration
Note for Figure 2:
1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.
Solder Pad Design
Notes for Figure 3:
1. The photograph shows the recommended LUXEON Rebel ES layout on Printed Circuit Board (PCB). This design easily achieves a thermal resistance of 7K/W.
2. Application Brief AB32 provides extensive details for this layout. Printed Circuit Board layout les (.dwg) are available at www.lumileds.com.
3
12
TOP
3
21
BOTTOM 3THERMAL
2ANODE
1CATHODE
PA DFUNCTION
Figure 2. Pad conguration.
Figure 3. Solder pad layout.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 10
Relative Spectral Distribution vs. Wavelength Characteristics
LXML-PWN2 (4100K) Neutral White at Test Current
Thermal Pad Temperature = 25°C
LXML-PWC2 (5650K) Cool White at Test Current
Thermal Pad Temperature = 25°C
0.8
1
r
ibution
0.4
0.6
0.8
1
S
pectral Power Distribution
0
0.2
0.4
0.6
0.8
1
350 400 450 500 550 600 650 700 750 800
Relative Spectral Power Distribution
0
0.2
0.4
0.6
0.8
1
350 400 450 500 550 600 650 700 750 800
Wavelength nm
Relative Spectral Power Distribution
Figure 4. Color spectrum of LXML-PWN2 emitter, integrated measurement.
0.8
1
s
tribution
0.4
0.6
0.8
1
Spectral Power Distribution
0
0.2
0.4
0.6
0.8
1
350 400 450 500 550 600 650 700 750 800
Relative Spectral Power Distribution
0
0.2
0.4
0.6
0.8
1
350 400 450 500 550 600 650 700 750 800
Wavelength nm
Relative Spectral Power Distribution
Figure 5. Color spectrum of LXML-PWC2 emitter, integrated measurement.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 11
LXH7-PW40 (4000K) at Test Current, Thermal Pad Temperature = 25°C
1
0.8
i
on
0.6
r Distribut
i
0.4
c
tral Powe
0.2
l
ative Spe
c
0
350
400
450
500
550
600
650
700
750
800
Re
l
350
400
450
500
550
600
650
700
750
800
Wavelength (nm)
Figure 6. Color spectrum of LXH7-PW40 emitter, integrated measurement.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 12
Typical Light Output Characteristics
Typical Relative Luminous Flux Vs. Temperature for LUXEON Rebel ES
Emitters at Test Current
Typical Forward Current Characteristics
4100K Neutral White and 5650K Cool White at Test Current,
Thermal Pad Temperature = 25°C
900
1000
700
800
600
700
e
nt [mA]
400
500
w
ard Curr
e
300
For
w
100
200
0
2.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90 2.95 3.00 3.05
Forward Voltage [V]
Figure 13. Forward current vs. forward voltage.
1.100
1.200
0.900
1.000
0.700
0.800
o
us Flux
0.500
0.600
v
e Lumin
o
0.300
0.400
Relati
v
0.100
0.200
0.000
-20 0 20 40 60 80 100 120 140
Thermal Pad Temperature [°C]
Figure 12. Relative light output vs. thermal pad temperature.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 13
Typical Luminous Ecacy
Typical Luminous Ecacy Characteristic vs. Forward Current for
4100K Neutral White and 5650K Cool White Emitters
Typical Relative Luminous Flux vs. Forward Current for
4100K Neutral White and 5650K Cool White Emitters.
Thermal Pad Temperature = 25°C
1 400
1.600
1.200
1
.
400
a
cy
1.000
o
us Effic
a
0 600
0.800
e
d Lumin
o
0.400
0
.
600
Normaliz
e
0.200
0.000
0 100 200 300 400 500 600 700 800 900 1000
Forward Current [mA]
Figure 14. Typical luminous ecacy characteristic vs. forward current, thermal pad temperature = 25°C.
1 400
1.600
1.200
1
.
400
x
1.000
n
ous Flu
x
0 600
0.800
t
ive Lumi
n
0.400
0
.
600
Rela
t
0.200
0.000
0 100 200 300 400 500 600 700 800 900 1000
Forward Current [mA]
Figure 15. Typical relative luminous ux vs. forward current, thermal pad temperature = 25°C.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 14
Typical Relative Luminous Ecacy vs. Temperature
1.100
1.200
0.900
1.000
c
acy
0.700
0.800
n
ous Effi
c
0.500
0.600
z
ed Lumi
n
0.300
0.400
Normali
z
0.100
0.200
0.000
-20 0 20 40 60 80 100 120 140
Thermal Pad Temperature [°C]
Figure 16. Relative luminous ecacy vs. thermal pad temperature, test current 700mA.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 15
Current Derating Curves
Current Derating Curves at 350mA Forward Current Operation for
4100K Neutral White and 5650K Cool White Emitters
Current Derating Curves at 700mA Forward Current Operation for
4100K Neutral White and 5650K Cool White Emitters
800
500
600
700
800
C
urrent mA
1
°
C/W
200
300
400
500
600
700
800
IF- Forward Current mA
15°C/W
25°C/W
35°C/W
0
100
200
300
400
500
600
700
800
0 25 50 75 100 125 150 175
IF- Forward Current mA
TA- Ambient Temperature °C
15°C/W
25°C/W
35°C/W
0
100
200
300
400
500
600
700
800
0 25 50 75 100 125 150 175
IF- Forward Current mA
TA- Ambient Temperature °C
15°C/W
25°C/W
35°C/W
Figure 18. Maximum forward current vs. ambient temperature, based on TJMAX = 150°C.
400
200
250
300
350
400
Current mA
15
°
C/W
100
150
200
250
300
350
400
IF- Forward Current mA
15°C/W
25°C/W
35°C/W
45°C/W
0
50
100
150
200
250
300
350
400
0 25 50 75 100 125 150 175
IF- Forward Current mA
TA- Ambient Temperature °C
15°C/W
25°C/W
35°C/W
45°C/W
0
50
100
150
200
250
300
350
400
0 25 50 75 100 125 150 175
IF- Forward Current mA
TA- Ambient Temperature °C
15°C/W
25°C/W
35°C/W
45°C/W
Figure 17. Maximum forward current vs. ambient temperature, based on TJMAX = 150°C.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 16
Current Derating Curves at 1000mA Forward Current Operation for
4100K Neutral White and 5650K Cool White Emitters
1200
600
800
1000
1200
a
rd Current mA
200
400
600
800
1000
1200
IF- Forward Current mA
15°C/W
25°C/W
0
200
400
600
800
1000
1200
0 25 50 75 100 125 150 175
IF- Forward Current mA
TA- Ambient Temperature °C
15°C/W
25°C/W
Figure 19. Maximum forward current vs. ambient temperature, based on TJMAX = 150°C.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 17
Typical Radiation Pattern
Typical Spatial Radiation Pattern for 4100K Neutral White
and 5650K Cool White Emitters
80%
90%
100%
50%
60%
70%
80%
90%
100%
a
tive Intensity
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Relative Intensity
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
-90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90
Relative Intensity
Angular Displacement (degrees)
Figure 20. Typical representative spatial radiation pattern for 4100K neutral white and 5650K cool white lambertian.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 18
Emitter Pocket Tape Packaging
1000
20 50
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 19
Emitter Reel Packaging
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 20
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given
in the technical data sheets. For this reason, Lumileds bins the LED components for luminous ux, color and forward
voltage (Vf ).
Decoding Product Bin Labeling
LUXEON Rebel ES emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for
emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination.
Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given
application.
Reels of LUXEON Rebel ES emitters are labeled with a four digit alphanumeric CAT code following the format below.
A B C D
A = Flux bin (P, Q, R, S etc.)
B & C = Color bin (W0, V0, U0 etc. for LXML-PWx2 series.
5W, 5X, 5Y and 5Z for LXH7-PW40 emitter)
D = Vf bin (P, R, S and T)
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 21
Luminous Flux Bins
Table 9 lists the standard photometric luminous ux bins for LUXEON Rebel ES emitters (tested and binned at
700mA).
Although several bins are outlined, product availability in a particular bin varies by production run and by product
performance.
Not all bins are available in all colors.
Table 9. Flux Bins
Bin Code Min Photometric
Flux (lm)
Max Photometric
Flux (lm)
P120 140
Q 140 160
R160*180
S 180 200
T200 220
U220 240
V240 260
W260 280
X 280 300
* 170 lm for LXW8-PW4
Beginning in March 2013, LUXEON Rebel ES will transition to 10 lumen ux bins as shown in the table below. This
transition may result in mixed shipments of old bin codes and new bin codes during calendar year 2013.
Table 10. Flux Bins
Bin Code Min Photometric
Flux (lm)
Max Photometric
Flux (lm)
1120 130
2 130 140
3 140 150
4 150 160
5160 170
6 170 180
7 180 190
8190 200
9200 210
A 210 220
B220 230
C 230 240
D240 250
E 250 260
F260 270
G 270 280
H 280 290
J290 300
K 300 310
L 310 320
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 22
4100K Neutral White Bin Structure
4100K Neutral White LUXEON Rebel ES emitters are tested and binned by x,y coordinates. 12 Color Bins, CCT Range
3,500K to 4,500K.
Table 11. 4100K Neutral White Bin Coordinates
Bin Code x y Typical CCT (K) Bin Code x y Typical CCT (K)
TM
0.367294
0.385953
0.381106
0.364212
0.400290
0.412995
0.393747
0.382878
4300 S0
0.378264
0.392368
0.387071
0.374075
0.382458
0.390932
0.373899
0.365822
3950
TN
0.364212
0.381106
0.378264
0.362219
0.382878
0.393747
0.382458
0.371616
4300 SP
0.374075
0.387071
0.382598
0.370582
0.365822
0.373899
0.359515
0.351953
3950
T0
0.362219
0.378264
0.374075
0.359401
0.371616
0.382458
0.365822
0.355699
4300 RM
0.402270
0.420940
0.414776
0.396279
0.422776
0.432618
0.416097
0.403508
3650
TP
0.359401
0.374075
0.370582
0.357079
0.355699
0.365822
0.351953
0.342581
4300 RN
0.396279
0.414776
0.408593
0.392368
0.403508
0.416097
0.399525
0.390932
3650
SM
0.385953
0.402270
0.396279
0.381106
0.412995
0.422776
0.403508
0.393747
3950 R0
0.392368
0.408593
0.402113
0.387071
0.390932
0.399525
0.382156
0.373899
3650
SN
0.381106
0.396279
0.392368
0.378264
0.393747
0.403508
0.390932
0.382458
3950 RP
0.387071
0.402113
0.396564
0.382598
0.373899
0.382156
0.367284
0.359515
3650
Note for Table 11:
1. Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.33 0.35 0.37 0.39 0.41 0.43
x
y
4500K
4100K
3800K
3500K
TM
SM
RM
RN
R0
RP
SN
S0
SP
TN
T0
TP
blackbody locus
Figure 21. 4100K Neutral White bin structure.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 23
5650K Cool White Bin Structure
0.25
0.25
0.27
0.29
0.31
0.33
0.35
0.37
0.39
0.41
0.27 0.29 0.31 0.33 0.35 0.37 0.39
x
y
10000K
6300K
5650K
5000K
4500K
7000K
Y0
YA
XM
XN
X0
XP
WM
VM
UM
UN
U0
UP
VN
V0
VP
WN
W0
WP
WQ
blackbody locus
Figure 22. 5650K Cool White bin structure.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 24
5650K Cool White LUXEON Rebel ES emitters are tested and binned by x,y coordinates. 19 Color Bins, CCT Range
4,500K to 10,000K.
Table 12. 5650K Cool White Bin Coordinates
Bin Code x y Typical CCT (K) Bin Code x y Typical CCT (K)
Y0
0.274238
0.303051
0.307553
0.282968
0.300667
0.332708
0.310778
0.283772
8000 WQ
0.318606
0.329393
0.329544
0.319597
0.310201
0.320211
0.310495
0.301303
6000
YA
0.282968
0.307553
0.311163
0.289922
0.283772
0.310778
0.293192
0.270316
8000 VM
0.328636
0.348147
0.346904
0.328823
0.368952
0.385629
0.371742
0.356917
5300
XM
0.301093
0.313617
0.314792
0.303051
0.342244
0.354992
0.344438
0.332708
6700 VN
0.328823
0.346904
0.345781
0.329006
0.356917
0.371742
0.359190
0.345092
5300
XN
0.303051
0.314792
0.316042
0.305170
0.332708
0.344438
0.333222
0.322386
6700 V0
0.329006
0.345781
0.344443
0.329220
0.345092
0.359190
0.344232
0.331331
5300
X0
0.305170
0.316042
0.317466
0.307553
0.322386
0.333222
0.320438
0.310778
6700 VP
0.329220
0.344443
0.343352
0.329393
0.331331
0.344232
0.332034
0.320211
5300
XP
0.307553
0.317466
0.319597
0.311163
0.310778
0.320438
0.301303
0.293192
6700 UM
0.348147
0.367294
0.364212
0.346904
0.385629
0.400290
0.382878
0.371742
4750
WM
0.313617
0.328636
0.328823
0.314792
0.354992
0.368952
0.356917
0.344438
6000 UN
0.346904
0.364212
0.362219
0.345781
0.371742
0.382878
0.371616
0.359190
4750
WN
0.314792
0.328823
0.329006
0.316042
0.344438
0.356917
0.345092
0.333222
6000 U0
0.345781
0.362219
0.359401
0.344443
0.359190
0.371616
0.355699
0.344232
4750
W0
0.316042
0.329006
0.329220
0.317466
0.333222
0.345092
0.331331
0.320438
6000 UP
0.344443
0.359401
0.357079
0.343352
0.344232
0.355699
0.342581
0.332034
4750
WP
0.317466
0.329220
0.329393
0.318606
0.320438
0.331331
0.320211
0.310201
6000
Note for Table 12:
1. Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 25
LUXEON Rebel ES ANSI 1/4th Quadrant Bin Structure
ANSI 1/4th quadrant bin structure for LXH7-PW40 emitter
LUXEON Rebel ES emitters are tested and binned by x,y coordinates.
4 Color Bins, CCT Range 3710K to 4260K
Table 14. LUXEON Rebel ES ANSI 1/4th quadrant Bin Coordinates for LXH7-PW40 emitter
Nominal CCT Bin Code x y
4000K 5W
0.382750
0.370300
0.367000
0.378400
0.380300
0.372600
0.357800
0.364700
4000K 5X
0.382750
0.387100
0.373600
0.370300
0.380300
0.395900
0.387400
0.372600
4000K 5Y
0.382750
0.395200
0.400600
0.387100
0.380300
0.388000
0.404400
0.395900
4000K 5Z
0.382750
0.378400
0.389800
0.395200
0.380300
0.364700
0.371600
0.388000
x
y
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.35 0.37 0.38 0.39 0.40 0.410.36 0.42
3985K
±275K
4000K
5Y
5Z
5X
5W
blackbody locus
Figure 24. LUXEON Rebel ES ANSI 1/4th quadrant bin structure (LXH7-PW40 emitter only).
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved. 26
Forward Voltage Bins
Table 15 lists minimum and maximum Vf bin values per emitter (tested and binned at 700mA). Although several bins
are outlined, product availability in a particular bin varies by production run and by product performance.
Table 15. Vf Bins
Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V)
P 2.50 2.75
R 2.75 3.00
S 3.00 3.25
T 3.25 3.50
DS061 LUXEON Rebel ES
Product Datasheet 20160628
Neither Lumileds Holding B.V. nor its aliates shall be liable for any kind of loss of data or any
other damages, direct, indirect or consequential, resulting from the use of the provided informa-
tion and data. Although Lumileds Holding B.V. and/or its aliates have attempted to provide
the most accurate information and data, the materials and services information and data are
provided “as is,” and neither Lumileds Holding B.V. nor its aliates warrants or guarantees the
contents and correctness of the provided information and data. Lumileds Holding B.V. and its
aliates reserve the right to make changes without notice. You as user agree to this disclaimer
and user agreement with the download or use of the provided materials, information and data.
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “rsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
To learn more about our portfolio of light engines, visit lumileds.com.
©2016 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
