2N6298 and 2N6299 PNP Darlington Power Silicon Transistor Available on commercial versions Qualified per MIL-PRF-19500/540 Qualified Levels: JAN, JANTX, and JANTXV DESCRIPTION This high speed PNP transistor is rated at 8 amps and is military qualified up to a JANTXV level. This TO-213AA isolated package features a 180 degree lead orientation. TO-213AA (TO-66) Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * * * * JEDEC registered 2N6298 and 2N6299 Hermetically sealed JAN, JANTX, and JANTXV qualifications are available per MIL-PRF-19500/540 RoHS compliant versions available (commercial grade only) APPLICATIONS / BENEFITS * * * Convenient package Mechanically rugged Military, space and other high reliability applications MAXIMUM RATINGS @ 25 C unless otherwise stated Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance Junction-to-Case Collector-Base Voltage Collector-Emitter Voltage 2N6298 2N6299 2N6298 2N6299 Emitter-Base Voltage Continuous Operating Collector Current Base Current (1) Total Power Dissipation @ T C = +25 C @ T C = +100 C Symbol T J and T STG R JC V CBO V CEO V EBO IC IB PT Value -65 to +175 2.33 -60 -80 -60 -80 -5 -8 -120 64 32 NOTES: 1. Derate linearly at 0.428 W/C above T C > +25 C. T4-LDS-0310, Rev. 1 (8/9/13) (c)2013 Microsemi Corporation Unit o C o C V V V A mA W MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Page 1 of 6 2N6298 and 2N6299 MECHANICAL and PACKAGING * * * * * CASE: Hermetic, TO-213AA package. Nickel plate with nickel cap. TERMINALS: Solder dipped (Sn63/Pb37) over nickel plated alloy 52. RoHS compliant matte-tin plating is also available. MARKING: MSC, part number, date code, polarity symbol WEIGHT: Approximately 5.7 grams See Package Dimensions on last page. PART NOMENCLATURE JAN 2N6298 (e3) Reliability Level JAN = JAN Level JANTX = JANTX Level JANTXV = JANTXV Level Blank = Commercial RoHS Compliance e3 = RoHS Compliant (available on commercial grade only) Blank = non-RoHS Compliant JEDEC type number (see Electrical Characteristics table) Symbol IB IC IE TC V CB V CBO V CC V CEO V EB V EBO SYMBOLS & DEFINITIONS Definition Base current: The value of the dc current into the base terminal. Collector current: The value of the dc current into the collector terminal. Emitter current: The value of the dc current into the emitter terminal. Case temperature: The temperature measured at a specified location on the case of a device. Collector-base voltage: The dc voltage between the collector and the base. Collector-base voltage, base open: The voltage between the collector and base terminals when the emitter terminal is open-circuited. Collector-supply voltage: The supply voltage applied to a circuit connected to the collector. Collector-emitter voltage, base open: The voltage between the collector and the emitter terminals when the base terminal is open-circuited. Emitter-base voltage: The dc voltage between the emitter and the base. Emitter-base voltage, collector open: The voltage between the emitter and base terminals with the collector terminal open-circuited. T4-LDS-0310, Rev. 1 (8/9/13) (c)2013 Microsemi Corporation Page 2 of 6 2N6298 and 2N6299 ELECTRICAL CHARACTERISTICS @ 25 C unless otherwise stated Parameters / Test Conditions (1) ON CHARACTERISTICS Symbol Min. 2N6298 2N6299 V (BR)CEO -60 -80 Collector-Emitter Cutoff Current V CE = -60, V BE = 1.5 V V CE = -80, V BE = 1.5 V 2N6298 2N6299 I CEX 10 A Collector-Emitter Cutoff Current, Base Open V CE = -30 V V CE = -40 V 2N6298 2N6299 I CEO -0.5 mA I EBO -2.0 mA Collector-Emitter Breakdown Voltage I C = -100 mA Emitter-Base Cutoff Current V EB = -5 V Forward Current Transfer Ratio I C = -1 A, V CE = -3 V I C = -4 A, V CE = -3 V I C = -8 A, V CE = -3 V Collector-Emitter Saturation Voltage I C = -4.0 A, I B = -16 mA I C = -8.0 A, I B = -80 mA Base-Emitter Saturation Voltage I C = -8.0 A, I B = -80 mA h FE DYNAMIC CHARACTERISTICS Parameters / Test Conditions Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio V CE = -3.0 V, I C = -3.0 A, f = 1 MHz Common Emitter Small-Signal Short-Circuit Forward Current Trans-Ratio V CE = -3 V, I C = -3 A, f = 1 kHz Output Capacitance V CB = -10 V, I E = 0 A, 100 kHz f 1 MHz 500 750 100 Max. Unit V 18000 V CE(sat) -2.0 V V BE(sat) -4.0 V Unit Symbol Min. Max. |h fe | 25 350 h fe 300 C obo 200 pF (1) Pulse Test: pulse width = 300 US, duty cycle 2.0 % T4-LDS-0310, Rev. 1 (8/9/13) (c)2013 Microsemi Corporation Page 3 of 6 2N6298 and 2N6299 o ELECTRICAL CHARACTERISTICS @ T C = 25 C unless otherwise noted. (continued) SWITCHING CHARACTERISTICS Parameters / Test Conditions Turn-On time V CC = -30 V, I C = -4 A, I B1 = -16 mA Turn-Off time V CC = -30 V, I C = -4 A, I B1 = -16 mA Symbol Min. Max. Unit t on 2.0 s t off 8.0 s SAFE OPERATING AREA (See figures 1 and 2 and MIL-STD-750,Test Method 3053) DC Tests T C = 25 C +10 C, t = 1 second, 1 Cycle Test 1 V CE = -8 V, I C = -8 A Test 2 V CE = -20 V, I C = -2.0 A Test 3 V CE = -60 V, I C = -100 mA (2N6298) V CE = -80 V, I C = -100 mA (2N6299) T4-LDS-0310, Rev. 1 (8/9/13) (c)2013 Microsemi Corporation Page 4 of 6 2N6298 and 2N6299 IC = Collector Current (Amperes) SAFE OPERATING AREA V CE - Collector to Emitter Voltage (Volts) IC = Collector Current (Amperes) FIGURE 1 Maximum Safe Operating Area (dc) L - Inductance (millihenries) FIGURE 2 Safe Operating Area for switching between saturation and cutoff (unclamped inductive load) T4-LDS-0310, Rev. 1 (8/9/13) (c)2013 Microsemi Corporation Page 5 of 6 2N6298 and 2N6299 PACKAGE DIMENSIONS DIM CB CD CH HR HT HR1 LD LL L1 MHD MHS PS PS1 S T1 T2 Case INCH MILLIMETERS MIN MAX MIN MAX 0.470 0.500 11.94 12.70 0.620 15.76 0.250 0.340 6.35 8.64 0.350 8.89 0.050 0.075 1.27 1.91 0.115 0.145 2.92 3.68 0.028 0.034 0.71 0.86 0.360 0.500 9.14 12.70 0.050 1.27 0.142 0.152 3.61 3.86 0.958 0.962 24.33 24.43 0.190 0.210 4.83 5.33 0.093 0.107 2.36 2.73 0.570 0.590 14.48 14.99 Base Emitter Collector Notes 4 4, 6 6 4 3 3 NOTES: 1. Dimensions are in inches. 2. Millimeters are given for information only. 3. These dimensions should be measured at points 0.050 inch (1.27 mm) +0.005 inch (0.13 mm) -0.000 inch (0.00 mm) below seating plane. When gauge is not used, measurement will be made at the seating plane. 4. Two places. 5. The seating plane of the header shall be flat within 0.001 inch (0.03 mm) concave to .004 inch (0.10 mm) convex inside a .930 inch (23.62 mm) diameter circle on the center of the header and flat within .001 inch (0.03 mm) concave to .006 inch (0.15 mm) convex overall. 6. Lead diameter shall not exceed twice LD within L1. 7. Lead number 1 is the emitter, lead 2 is the base, case is the collector. 8. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. SCHEMATIC T4-LDS-0310, Rev. 1 (8/9/13) (c)2013 Microsemi Corporation Page 6 of 6