- 478 -
W005GM THRU W10GM
Single Phase 1.5 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.5 Amperes
Features
a UL Recognized File # E-96005
a Glass passivated junction
a Surge overload ratings to 50 amperes
peak
a Ideal for printed circuit board
a Reliable low cost construction technique
results in inexpensive product
a High temperature soldering guaranteed:
250/ 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs. ( 2.3 Kg ) tension
Mechanical Data
a Case: Molded plastic
a Lead: Solder plated
a Polarity: As marked
a
Weight: 1.10 grams
WOB
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number W005GM W01GM W02GM W04GM W06GM W08GM W10GM Units
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TA = 50 1.5 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
(JEDEC method ) 50 A
Maximum Instantaneous Forward Voltage
@ 1.5A 1.0 V
Maximum DC Reverse Current @ TA=25
at Rated DC Blocking Voltage @ TA=125 10
500 uA
uA
Typical Thermal resistance (Note) R
θ
JA
R
θ
JL 36
13
/W
Operating Temperature Range TJ -55 to +150
Storage Temperature Range TSTG -55 to +150
Note: Thermal resistance from Junction to Ambient and from Junction to Lead Mounted on
P.C.B. with 0.47 x 0.47” (12 x 12mm) Copper Pads.