In the event of conflict, the requirements of this specification shall govern. Revision: MOEH021810D
Specifications subject to change without notice 1 of 2
MOEH and MOEZ Series / Euro Package, 5 Pin OCXO
¾ Standard CO-08 OCXO Euro Package
¾ Wide Frequency Range
¾ SC Cut Crystal Option Available
¾ Custom Options Available
ELECTRICAL SPECIFICATION:
Frequency Range 1.000MHZ to 150.000MHZ
Stability
Frequency at +25ºC at time of shipment ±10 ppb at +25ºC with Vnom on Pin 1
Frequency vs. Ambient See Part Number Guide for Options
Frequency vs. Voltage Less than ±5 ppb for 5% change in Supply Voltage
Frequency vs. Load Less than ±5 ppb for 5% change in Load
AT Cut ±1.0 ppm per year after 30 days
Frequency vs. Time SC Cut ±0.1 ppm per year after 30 days
Warm Up 3 min at +25ºC to ±1.0 ppm of final frequency (1 hr reading)
Supply and Reference Voltages
Supply Voltage (Vdd) +3.30 VDC ±5% +5.00 VDC ±5% +12.00 VDC ±5%
Steady State 540 mA 360 mA 150 mA
Supply Current Warm Up 1000 mA 720 mA 650 mA
Reference Voltage +3.00 VDC ±5% +4.00 VDC ±5% 4.00 VDC ±5%
Output
HCMOS +3.30 VDC ±5% +5.00 VDC ±5% +12.00 VDC ±5%
Logic “0” (max) +0.33 VDC +0.50 VDC +0.50 VDC
Logic “1” (min) +2.97 VDC +4.50 VDC +4.50 VDC
Symmetry (50% of Waveform) See Part Number Guide for Options
Load 15pF
Sinewave
Amplitude See Part Number Guide for Options
Spurious (Harmonics) -20 dBc
Spurious (Non Harmonics) -80 dBc
Load 50Ω
Electronic Frequency Control +3.30 VDC ±5% +5.00 VDC ±5% +12.00 VDC ±5%
Control Voltage Range 0.00 to +3.30 VDC 0.00 to + 5.00 VDC 0.00 to + 5.00 VDC
Vnom (Pin 1) +1.65 VDC +2.50 VDC +2.50 VDC
AT Cut ±1.0 ppm typ
Total Frequency Change SC Cut ±0.6 ppm min
Slope Positive
Input Impedance 100kΩ typ
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
In the event of conflict, the requirements of this specification shall govern. Revision: MOEH021810D
Specifications subject to change without notice 2 of 2
PART NUMBER GUIDE:
MOE Frequency
Please Consult with MMD Sales Department for any other Parameters or Options
Output
H = HCMOS
Z3 = Sinewave +3dBm
Crystal Cut
Blank = AT Cut
S = SC Cut
Supply Voltage
3 = +3.30 VDC
5 = +5.00 VDC
12 = +12.00 VDC
Height
A = 18.64 [.734]
B = 13.46 [.530]
Frequency
Stability
002 = ±2 ppb
005 = ±5 ppb
010 = ±10 ppb
050 = ±50 ppb
XXX = 3 digits in ppb
Operating
Temperature
A = 0°C to + 50°C
C = -20°C to +70°C
D = -30°C to +70°C
E = -30°C to +80°C
F = -40°C to +85°C
G = 0°C to +70°C
Value Added Options
Blank = No Added Options
S3 = Stratum 3
Symmetry
Blank = 40%/60%
A = 45%/55%
RoHS Compliant
Blank = Not Compliant
F = is Compliant
Z7 = Sinewave +7dBm
MECHANICAL DETAIL:
12.70 [.500]
25.40 [1.000]
4
51
3
Ø2.00 [Ø.079]
35.33 [1.391]
26.97 [1.062]
MMD
PART NUMBER
FREQUENCY
SYYWW
17.78 [.700]
215.24 [.600]17.60 [.693]
8.80 [.346]
0.80 [.031]
6.35 [.250]
MIN
H DIM
0.51 [.020]
REFERENCE VOLTAGE
PIN 2
PIN 1
PIN CONNECTIONS
PIN 3
PIN 4
PIN 5
SUPPLY VOLTAGE
OUTPUT
GROUND
13.46 [.530]
B
A
HEIGHT DIMENSION
18.64 [.734]
DIMENSION IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR IS RECOMMENDED
PIN NUMBERS ARE FOR REFERENCE ONLY
FREQUENCY CONTROL
ENVIRONMENTAL/MECHANICAL SPECIFICATION: MARKING DETAIL:
Shock MIL-STD-883, Meth 2002, Cond B
Solderability MIL-STD-883, Meth 2003
Vibration MIL-STD-883, Meth 2007, Cond A
Gross Leak Test MIL-STD-883, Meth 1014, Cond C
Fine Leak Test MIL-STD-883, Meth 1014, Cond A
MSL Level 1 per IPC/JEDEC’S J-STD-20
Line 1 = MMD
Line 2 = MMD Part Number
Line 3 = Frequency Output
Line 4 = Data Code
S = Internal Code
YYWW = 4 Digit Date Code (Year / Month)
L = Denotes RoHS Compliant
Black dot to denote Pin 1
PHASE NOISE:
Phase Noise at 10.000MHZ SC Cut Crystal AT Cut Crystal
10 Hz -110 dBC -100 dBc
100 Hz -130 dBc -110 dBc
1 kHz -140 dBc -135 dBc
10 kHz -155 dBc -140 dBc
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
