ZPY10 2% ... ZPY200 2% (1.3 W) ZPY10 2% ... ZPY200 2% (1.3 W) Silicon Power Z-Diodes (non-planar technology) Silizium-Leistungs-Z-Dioden (flachendiffundierte Dioden) Version 2006-06-08 Maximum power dissipation Maximale Verlustleistung -0.1 -0.1 5.1 Type 62.5 0.5 O 2.6 O 0.80.05 Dimensions - Mae [mm] 1.3 W Nominal Z-voltage Nominale Z-Spannung 10...200 V Plastic case Kunststoffgehause DO-41 (DO-204AL) Weight approx. Gewicht ca. 0.4 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Standard packaging taped in ammo pack Standard Lieferform gegurtet in Ammo-Pack Standard Zener voltage tolerance is graded to the international E 24 standard (~ 5%). The devices ZPY10 2% ... ZPY200 2% are specially selected. Other voltage tolerances and Zener voltages on request. Die Standard-Toleranz der Z-Spannung ist gestuft nach der internationalen Reihe E 24 (~ 5%). Die Reihe ZPY10 2% ... ZPY200 2% ist eine Sonderselektion. Andere Toleranzen oder Zener-Spannungen auf Anfrage. Maximum ratings and Characteristics Grenz- und Kennwerte Power dissipation Verlustleistung TA = 50C Ptot Non repetitive peak power dissipation, t < 10 ms Einmalige Impuls-Verlustleistung, t < 10 ms TA = 25C PZSM 1.3 W 1) 40 W Junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS -50...+150C -50...+175C Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA <45 K/W 1) Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Anschluss RthT <15 K/W Zener voltages see table on next page - Zener-Spannungen siehe Tabelle auf der nachsten Seite 2 1 2 Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gultig, wenn die Anschlussdrahte in 10 mm Abstand vom Gehause auf Umgebungstemperatur gehalten werden Tested with pulses - Gemessen mit Impulsen (c) Diotec Semiconductor AG http://www.diotec.com/ 1 ZPY10 2% ... ZPY200 2% (1.3 W) Maximum ratings Type Typ Grenzwerte 2 Test current Mess-Strom Dynamic resistance Diff. Widerstand IZtest / f = 1 kHz Temp. Coeffic. of Z-voltage ...der Z-Spannung Reverse volt. Sperrspanng. IR = 1 A Z-current 1) Z-Strom 1) TA = 50C Vzmax [V] IZtest [mA] rzj [] VZ [10-4 /C] VR [V] IZmax [mA] Zener voltage ) Zener-Spannung 2) IZ = IZtest Vzmin [V] ZPY10 2% 9.79 10.21 50 2 (<4) +5...+9 >5 123 ZPY11 2% 10.79 11.21 50 4 (<7) +5...+10 >5 112 ZPY12 2% 11.79 12.21 50 4 (<7) +5...+10 >7 102 ZPY13 2% 12.68 13.32 50 5 (<10) +5...+10 >7 92 ZPY15 2% 14.68 15.32 50 5 (<10) +5...+10 > 10 83 ZPY16 2% 15.68 16.32 25 6 (<15) +6...+11 > 10 76 ZPY18 2% 17.58 18.42 25 6 (<15) +6...+11 > 10 68 ZPY20 2% 19.58 20.42 25 6 (<15) +6...+11 > 10 61 ZPY22 2% 21.58 22.42 25 6 (<15) +6...+11 > 12 56 ZPY24 2% 23.48 24.52 25 7 (<15) +6...+11 > 12 51 ZPY27 2% 26.48 27.52 25 7 (<15) +6...+11 > 14 45 ZPY30 2% 29.38 30.62 25 8 (<15) +6...+11 > 14 41 ZPY33 2% 32.3 33.8 25 8 (<15) +6...+11 > 17 37 ZPY36 2% 35.2 36.8 10 16 (<40) +6...+11 > 17 34 ZPY39 2% 38.1 39.9 10 20 (<40) +6...+11 > 20 32 ZPY43 2% 42.0 44.0 10 24 (<45) +7...+12 > 20 28 ZPY47 2% 46.0 48.0 10 24 (<45) +7...+12 > 24 26 ZPY51 2% 49.9 52.1 10 25 (<60) +7...+12 > 24 24 ZPY56 2% 54.8 57.2 10 25 (<60) +7...+12 > 28 22 ZPY62 2% 60.7 63.3 10 25 (<80) +8...+13 > 28 20 ZPY68 2% 66.5 69.5 10 25 (<80) +8...+13 > 34 18 ZPY75 2% 73.4 76.6 10 30 (<100) +8...+13 > 34 16 ZPY82 2% 80.3 83.7 10 30 (<100) +8...+13 > 41 15 ZPY91 2% 89.1 92.9 5 40 (<200) +9...+13 > 41 14 ZPY100 2% 97.9 102.1 5 60 (<200) +9...+13 > 50 12 ZPY110 2% 108 112 5 80 (<250) +9...+13 > 50 12 ZPY120 2% 118 122 5 80 (<250) +9...+13 > 60 11 ZPY130 2% 127 133 5 90 (<300) +9...+13 > 60 10 ZPY150 2% 147 153 5 100 (<300) +9...+13 > 75 8 ZPY160 2% 157 163 5 110 (<350) +9...+13 > 75 8 ZPY180 2% 176 184 5 120 (<350) +9...+13 > 90 7 ZPY200 2% 196 204 5 150 (<350) +9...+13 > 90 6 1 2 Notes see previous page - Funoten siehe vorhergehende Seite http://www.diotec.com/ (c) Diotec Semiconductor AG