ENM’s Series T41 DC Hour Meter is the answer to applications
requiring a low power, low cost reliable hour meter. This compact
tamper proof meter is sealed against the environment to provide
years of service.
Accumulated hours are stored in the mechanical indicating
counter, therefore no battery is required to maintain elapsed time.
The T41 input is polarity insensitive and with a quartz-crystal time
base insures accurate long-term timekeeping.
Specifications
sruoh 9.999,99 stigid-6:yalpsiD
Automatic recycle to zero
kcalb no etihw – sruoH:serugiF
Tenths – red on white
Height – .125“
Operating Voltage: Range 10-80 VDC
12-28 VDC
Power Consumption: Less than .03 Watts at 12 VDC
.7 Watts at 28 VDC
egnar eritne revo %10.0 -/+ naht retteB:ycaruccA
Temperature: Standard -30ºC to +65ºC
(-22ºF to +149ºF)
Special -40ºC to +85ºC
(-40ºF to +185ºF)
Vibration Resistance: Withstands 10 to 75 Hz @ 1 to 8 g’s
Termination: 1/4" male blade terminals
Configuration: Front panel mounts with push on
retaining clip, Panel mount wtih 2 holes
(front or back)
Features
•Solid State Electronics Drive Circuit
•Quartz Crystal for Accurate Timing
•Absolutely Will Not Lose Count
•Quiet Operating
• Indicates Operating Time in Hours
and Tenths
•High Impact, Tamperproof Plastic Case
• Totally Sealed
• No Battery Back-Up Required
•UL, cUL, and CE Recognized
•ISO 9001:2008 Certified
•Made in the U.S.A.
Electronic Miniature
DC Hour Meter, Series T41
602
Technical Data
Toll Free (888) 372-0465 • e-mail:ENMCo@aol.com
Counting Instruments
© ENM Co.
ENM Company
5617 Northwest Highway, Chicago, IL 60646-6135
(773) 775-8400 • Fax:(773) 775-5968
web site:www.enmco.com
2013 ENM Co.®
T41D
T41E
SERIES T41
Dimensional Data
602
ISO 9001
Counting Instruments
© ENM Co.
ENM Company
5617 Northwest Highway, Chicago, IL 60646-6135
(773) 775-8400 • Fax:(773) 775-5968 • Toll Free (888) 372-0465
web site:www.enmco.com • e-mail:ENMCo@aol.com
LIMITED WARRANTY
Series T41E Back of Panel Mount
(ALL DIMENSIONS IN PARENTHESIS ARE MM.)
Series T41D Front of Panel Mount Series T41G Front of Panel Mount
Standard Features
T41E45 - 10-80VDC Back of Panel Mtg.
T41E41 - 12-28VDC Back of Panel Mtg.
T41D45 - 10-80VDC Front Panel Mtg.
T41D41 - 12-28VDC Front Panel Mtg.
T41G45 - 10-80VDC Front Panel Mtg.
T41G41 - 12-28VDC Front Panel Mtg.
Available to facilitate installation are:
1. Two 12" long wires with insulated
quick disconnects.
2. Quick disconnect screw terminal.
2013 ENM Co.®
ENM Company hour meters are warranted to the consumer to be free from defects in material and workmanship for a period of 10,000 operating hours or for a period of 3 years, whichever
first occurs. All ENM products which fall within the warranty period due to defects in material or workmanship will be repaired or replaced, at ENM’s option, without charge to the consumer
when returned with proof of purchase to any authorized ENM dealer in the United States, transportation charges prepaid, provided there is no evidence of improper installation, tampering, or
other abuse. All implied warranties, including any implied warranty of merchantability or fitness for a particular purpose, shall be limited in duration to the express warranty period specified
above. ENM disclaims any liability for consequential damages due to breach of any written or implied warranty on its hour meter..Datasheet information subject to change.
