P6SMB7.5CA-E3/52 - Vishay [General Semiconductor]

P6SMB Series

Vishay General Semiconductor

Document Number: 88370

Revision: 21-Oct-08

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

www.vishay.com

Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in uni-directional and bi-directional

• 600 W peak pulse power capability with a

10/1000 µs waveform, repetitive rate (duty

cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum

peak of 260 °C

• Solder dip 260 °C, 40 s

• Component in accordance to RoHS 2002/95/EC

and WEEE 2002/96/EC

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching

and lighting on ICs, MOSFET, signal lines of

sensor units for consumer, computer, industrial and

telecommunication.

MECHANICAL DATA

Case: DO-214AA (SMB)

Molding compound meets UL 94 V-0 flammability

rating

Base P/N-E3 - RoHS compliant, commercial grade

Base P/NHE3 - RoHS compliant, high reliability/

automotive grade (AEC Q101 qualified)

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD22-B102

E3 suffix meets JESD 201 class 1A whisker test, HE3

suffix meets JESD 201 class 2 whisker test

Polarity: For uni-directional types the band denotes

cathode end, no marking on bi-directional types

DEVICES FOR BI-DIRECTION APPLICATIONS

For bi-directional devices use CA suffix (e.g.

P6SMB10CA).

Electrical characteristics apply in both directions.

PRIMARY CHARACTERISTICS

VBR uni-directional 6.8 V to 540 V

VBR bi-directional 6.8 V to 220 V

PPPM 600 W

PD5.0 W

IFSM (uni-directional only) 100 A

TJ max. 150 °C

DO-214AA (SMB)

Notes:

(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2

(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Peak power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1) PPPM 600 W

Peak pulse current with a 10/1000 µs waveform (1) I

PPM See next table A

Power dissipation on infinite heatsink TA = 50 °C , PD5.0 W

Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I

FSM 100 A

Operating junction and storage temperature range TJ, TSTG - 65 to + 150 °C

P6SMB Series

Vishay General Semiconductor

www.vishay.com For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88370

Revision: 21-Oct-08

Notes:

(1) Pulse test: tp ≤ 50 ms

(2) Surge current waveform per Fig. 3 and derate per Fig. 2

(3) For bi-directional types with VWM of 10 V and less, the ID limit is doubled

(4) All terms and symbols are consistent with ANSI/IEEE C62.35

(5) VF = 3 V at IF = 50 A (uni-directional only)

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

GENERAL

SEMICONDUCTOR

PART NUMBER

DEVICE

MARKING

CODE

BREAKDOWN

VOLTAG E

AT I

T (1)

(V)

TEST

CURRENT

(mA)

STAND-OFF

VOLTAGE

(V)

MAXIMUM

REVERSE

LEAKAGE

AT V

(3)

(µA)

MAXIMUM

PEAK

PULSE

CURRENT

PPM

(2)

(A)

MAXIMUM

CLAMPING

VOLTAG E

AT I

PPM

(V)

MAXIMUM

TEMP.

COEFFICIENT

OF VBR

(%/°C)

UNI BI

MIN. MAX.

P6SMB6.8A 6V8A 6V8C 6.45 7.14 10 5.80 1000 57.1 10.5 0.057

P6SMB7.5A 7V5A 7V5C 7.13 7.88 10 6.40 500 53.1 11.3 0.061

P6SMB8.2A 8V2A 8V2C 7.79 8.61 10 7.02 200 49.6 12.1 0.065

P6SMB9.1A 9V1A 9V1C 8.65 9.55 1.0 7.78 50 44.8 13.4 0.068

P6SMB10A 10A 10C 9.50 10.5 1.0 8.55 10 41.4 14.5 0.073

P6SMB11A 11A 11C 10.5 11.6 1.0 9.40 5.0 38.5 15.6 0.075

P6SMB12A 12A 12C 11.4 12.6 1.0 10.2 5.0 35.9 16.7 0.078

P6SMB13A 13A 13C 12.4 13.7 1.0 11.1 5.0 33.0 18.2 0.081

P6SMB15A 15A 15C 14.3 15.8 1.0 12.8 1.0 28.3 21.2 0.084

P6SMB16A 16A 16C 15.2 16.8 1.0 13.6 1.0 26.7 22.5 0.086

P6SMB18A 18A 18C 17.1 18.9 1.0 15.3 1.0 23.8 25.2 0.088

P6SMB20A 20A 20C 19.0 21.0 1.0 17.1 1.0 21.7 27.7 0.090

P6SMB22A 22A 22C 20.9 23.1 1.0 18.8 1.0 19.6 30.6 0.092

P6SMB24A 24A 24C 22.8 25.2 1.0 20.5 1.0 18.1 33.2 0.094

P6SMB27A 27A 27C 25.7 28.4 1.0 23.1 1.0 16.0 37.5 0.096

P6SMB30A 30A 30C 28.5 31.5 1.0 25.6 1.0 14.5 41.4 0.097

P6SMB33A 33A 33C 31.4 34.7 1.0 28.2 1.0 13.1 45.7 0.098

P6SMB36A 36A 36C 34.2 37.8 1.0 30.8 1.0 12.0 49.9 0.099

P6SMB39A 39A 39C 37.1 41.0 1.0 33.3 1.0 11.1 53.9 0.100

P6SMB43A 43A 43C 40.9 45.2 1.0 36.8 1.0 10.1 59.3 0.101

P6SMB47A 47A 47C 44.7 49.4 1.0 40.2 1.0 9.3 64.8 0.101

P6SMB51A 51A 51C 48.5 53.6 1.0 43.6 1.0 8.6 70.1 0.102

P6SMB56A 56A 56C 53.2 58.8 1.0 47.8 1.0 7.8 77.0 0.103

P6SMB62A 62A 62C 58.9 65.1 1.0 53.0 1.0 7.1 85.0 0.104

P6SMB68A 68A 68C 64.6 71.4 1.0 58.1 1.0 6.5 92.0 0.104

P6SMB75A 75A 75C 71.3 78.8 1.0 64.1 1.0 5.8 103 0.105

P6SMB82A 82A 82C 77.9 86.1 1.0 70.1 1.0 5.3 113 0.105

P6SMB91A 91A 91C 86.5 95.5 1.0 77.8 1.0 4.8 125 0.106

P6SMB100A 100A 100C 95.0 105 1.0 85.5 1.0 4.4 137 0.106

P6SMB110A 110A 110C 105 116 1.0 94.0 1.0 3.9 152 0.107

P6SMB120A 120A 120C 114 126 1.0 102 1.0 3.6 165 0.107

P6SMB130A 130A 130C 124 137 1.0 111 1.0 3.4 179 0.107

P6SMB150A 150A 150C 143 158 1.0 128 1.0 2.9 207 0.108

P6SMB160A 160A 160C 152 168 1.0 136 1.0 2.7 219 0.108

P6SMB170A 170A 170C 162 179 1.0 145 1.0 2.6 234 0.108

P6SMB180A 180A 180C 171 189 1.0 154 1.0 2.4 246 0.108

P6SMB200A 200A 200C 190 210 1.0 171 1.0 2.2 274 0.108

P6SMB220A 220A 220C 209 231 1.0 185 1.0 1.8 328 0.108

P6SMB250A 250A - 237 263 1.0 214 1.0 1.74 344 0.110

P6SMB300A 300A - 285 315 1.0 256 1.0 1.45 414 0.110

P6SMB350A 350A - 333 368 1.0 300 1.0 1.24 482 0.110

P6SMB400A 400A - 380 420 1.0 342 1.0 1.10 548 0.110

P6SMB440A 440A - 418 462 1.0 376 1.0 1.00 602 0.110

P6SMB480A 480A - 456 504 1.0 408 1.0 0.91 658 0.110

P6SMB510A 510A - 485 535 1.0 434 1.0 0.86 698 0.110

P6SMB540A 540A - 513 567 1.0 459 1.0 0.81 740 0.110

P6SMB Series

Vishay General Semiconductor

Document Number: 88370

Revision: 21-Oct-08

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

www.vishay.com

Note:

(1) Mounted on minimum recommended pad layout

Note:

(1) Automotive grade AEC Q101 qualified

RATINGS AND CHARACTERISTICS CURVES

(TA = 25 °C unless otherwise noted)

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Thermal resistance, junction to ambient air (1) R

θJA 100 °C/W

Thermal resistance, junction to leads RθJL 20 °C/W

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

P6SMB6.8A-E3/52 0.096 52 750 7" diameter plastic tape and reel

P6SMB6.8A-E3/5B 0.096 5B 3200 13" diameter plastic tape and reel

P6SMB6.8AHE3/52 (1) 0.096 52 750 7" diameter plastic tape and reel

P6SMB6.8AHE3/5B (1) 0.096 5B 3200 13" diameter plastic tape and reel

Figure 1. Peak Pulse Power Rating Curve

Figure 2. Pulse Power or Current vs. Initial Junction Temperature

0.2 x 0.2" (5.0 x 5.0 mm)

Copper Pad Areas

0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms

100

0.1

PPM

- Peak Pulse Power (kW)

td - Pulse Width (s)

0 255075100

100

125 150 175 200

TJ - Initial Temperature (°C)

Peak Pulse Power (P

) or Current (I

)

Derating in Percentage, %

Figure 3. Pulse Waveform

Figure 4. Typical Junction Capacitance

100

150

01.0 2.0 3.0 4.0

IPPM - Peak Pulse Current, % IRSM

t - Time (ms)

= 10 µs

Peak Value

PPM

Half Value -

PPM

10/1000 µs Waveform

as defined by R.E.A.

= 25 °C

Pulse Width (t

)

is defined as the Point

where the Peak Current

decays to 50 % of I

PPM

100

1000

101 100 200

Uni-Directional

Bi-Directional

6000

= 25 °C

f = 1.0 MHz

sig

= 50 mVp-p

Measured at

Zero Bias

, Measured at

Stand-Off Voltage V

- Junction Capacitance (pF)

- Reverse Stand-Off Voltage (V)

P6SMB Series

Vishay General Semiconductor

www.vishay.com For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88370

Revision: 21-Oct-08

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

Figure 5. Typical Transient Thermal Impedance

0.1

1.0

100

0.001 0.01 0.1 1 10 100 1000

- Pulse Duration (s)

Transient Thermal Impedance (°C/W)

Figure 6. Maximum Non-Repetitive Peak Forward Surge Current

200

100

1100

8.3 ms Single Half Sine-Wave

Uni-Directional Only

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

Mounting Pad Layout

0.085 (2.159)

MAX.

0.086 (2.18)

MIN.

0.060 (1.52)

MIN.

0.220 REF.

DO-214AA (SMB)

Cathode Band

0.155 (3.94)

0.130 (3.30)

0.012 (0.305)

0.006 (0.152)

0.008 (0.2)

0 (0)

0.220 (5.59)

0.205 (5.21)

0.060 (1.52)

0.030 (0.76)

0.096 (2.44)

0.084 (2.13)

0.180 (4.57)

0.160 (4.06)

0.086 (2.20)

0.077 (1.95)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.