TLP127 TOSHIBA Photocoupler GaAs Ired & Photo-Transistor TLP127 Programmable Controllers DC-Output Module Telecommunication Unit in mm The TOSHIBA mini flat coupler TLP127 is a small outline coupler, suitable for surface mount assembly. TLP127 consists of a gallium arsenide infrared emitting diode, optically coupled to a darlington photo transistor with an integral base-emitter resistor, and provides 300V VCEO. * Collector-emitter voltage: 300 V (min.) * Current transfer ratio: 1000% (min.) * Isolation voltage: 2500Vrms (min.) * UL recognized: UL1577, file no. E67349 * BSI approved: BS EN60065:2002, certificate no.8927 BS EN60950-1:2002, certificate no.8928 TOSHIBA Weight: 0.09 g 11-4C1 Pin Configurations (top view) 1 6 3 4 1 : ANODE 3 : CATHODE 4 : EMITTER 6 : COLLECTOR 1 2007-10-01 TLP127 Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit IF 50 mA IF / C -0.7 (Ta 53C) mA / C Pulse forward current IFP 1 (100s pulse, 100pps) A Reverse voltage VR 5 V Junction temperature Tj 125 C Collector-emitter voltage VCEO 300 V Emitter-collector voltage VECO 0.3 V Forward current LED Forward current derating IC 150 mA Collector power dissipation PC 150 mW Collector power dissipation derating (Ta 25C) PC / C -1.5 mW / C Tj 125 C Storage temperature range Tstg -55~125 C Operating temperature range Topr -55~100 C Lead soldering temperature Tsol 260 (10s) C Total package power dissipation PT 200 mW Total package power dissipation derating (Ta 25C) PT / C -2.0 mW / C BVS 2500 (AC, 1min., R.H. 60%) Vrms Detector Collector current Junction temperature Isolation voltage (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1) Device considered a two terminal device: Pins 1, 3 shorted together and pins 4, 6 shorted together. 2 2007-10-01 TLP127 Individual Electrical Characteristics (Ta = 25C) Detector LED Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5V 10 A Capacitance CT V = 0, f = 1 MHz 30 pF Collector-emitter breakdown voltage V(BR) CEO IC = 0.1 mA 300 V Emitter-collector breakdown voltage V(BR) ECO IE = 0.1 mA 0.3 V VCE = 200 V 10 200 nA VCE = 200 V, Ta = 85C 20 A V = 0, f = 1 MHz 12 pF MIn. Typ. Max. Unit IF = 1mA, VCE = 1 V 1000 4000 % IF = 10 mA, VCE = 1 V 500 % IC = 10 mA, IF = 1 mA 1.0 IC = 100 mA, IF = 10 mA 0.3 1.2 Test Condition Min. Typ. Max. Unit 0.8 pF Collector dark current ICEO Capacitance collector to emitter CCE Coupled Electrical Characteristics (Ta = 25C) Characteristic Current transfer ratio Saturated CTR Collector-emitter saturation voltage Symbol IC / IF IC / IF (sat) VCE (sat) Test Condition V Isolation Characteristics (Ta = 25C) Characteristic Symbol Capacitance (input to output) CS VS = 0, f = 1 MHz Isolation resistance RS VS = 500 V, R.H. 60% AC, 1 minute Isolation voltage BVS 5x10 10 10 14 2500 AC, 1 second, in oil 5000 DC, 1 minute, in oil 5000 3 Vrms Vdc 2007-10-01 TLP127 Switching Characteristics (Ta = 25C) Characteristic Symbol Rise time tr Fall time tf Turn-on time Test Condition VCC = 10 V, IC = 10 mA RL = 100 ton Min. Typ. Max. 40 15 50 Turn-off time toff 15 Turn-on time tON 5 40 80 RL = 180 VCC = 10 V, IF = 16 mA Storage time ts Turn-off time tOFF (Fig.1) Unit s s Recommended Operating Conditions Characteristic Symbol Min. Typ. Max. Unit Supply voltage VCC 200 V Forward current IF 16 25 mA Collector current IC 120 mA Topr -25 85 C Operating temperature Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Fig. 1 Switching time test circuit IF RL IF VCC ts VCE VCE VCC 9V 1V tON 4 tOFF 2007-10-01 TLP127 IF - Ta PC - Ta 200 Allowable collector power dissipation PC (mW) Allowable forward current IF (mA) 100 80 60 40 20 0 -20 0 40 20 60 100 80 Ambient temperature Ta 160 120 80 40 0 -20 120 0 40 20 Ambient temperature (C) Pulse width 100s IF 300 Forward current Pulse forward current 500 100 50 30 10 3 10-3 10-2 3 10-1 3 Duty cycle ratio 30 10 5 3 1 0.5 0.3 100 3 DR 0.1 0.6 0.8 1.0 VF / Ta - IF 1.2 1.4 VF 1.6 1.8 2.6 3.0 (V) IFP - VFP -3.2 (mA) 1000 -2.8 IFP -2.4 -2.0 Pulse forward current Forward voltage temperature coefficient VF / Ta (mV / C) (C) Ta = 25C Forward voltage -1.6 -1.2 -0.8 -0.4 0.1 Ta 120 50 Ta = 25C 1000 100 80 IF - V F 100 (mA) IFP (mA) IFP - DR 3000 60 0.3 0.5 1 3 Forward current 5 10 30 500 300 100 50 30 10 IF (mA) Repetitive 3 1 0.6 50 Pulse width 10s 5 Frequency = 100Hz Ta = 25C 1.0 1.4 1.8 Pulse forward voltage 5 2.2 VFP (V) 2007-10-01 TLP127 IC - VCE Ta = 25C I C - IF 300 (mA) Collector current 100 50 30 Sample A 120 IC (mA) 4mA IC 10mA Collector current 160 2mA 80 1mA 40 Sample B 10 5 Ta = 25C 3 VCE = 1.2V IF = 0.5mA 0 0.4 0.8 1.6 1.2 Collector-emitter voltage VCE = 1V 1 2.0 0.5 1 3 Forward current VCE (V) Switching Time - RL 30 IF 10000 Ta = 25C Ta = 25C Sample A VCE = 1.2V VCE = 1V 5000 300 IC / IF (%) tOFF(IF = 16mA) 100 tOFF(IF = 1.6mA) 50 100 (mA) VCC = 10V 500 50 IC / IF - IF 1000 30 Current transfer ratio Switching time (s) 10 5 tON(IF = 1.6mA) 10 5 3 3000 Sample B 1000 500 300 tON(IF = 16mA) 1 50 100 300 500 Load resistance 1k 3k RL 5k 100 0.3 10k 0.5 1 3 Forward current (k) 6 10 5 IF 30 50 (mA) 2007-10-01 TLP127 IC - Ta ICEO - Ta 1 120 0 10 VCE = 1V 100 IF = 10mA 80 60 40 1mA 20 0 -40 -1 -20 0 20 40 Ambient temperature 60 Ta 80 100 80 100 () VCE = 200V 150V 10 80V -2 VCE(sat) - Ta 1.2 10 10 Collector-emitter saturation voltage VCE(sat) (V) Collector dark current ICEO (A) 10 Collector current IC (mA) 10 -3 IF = 1mA IC = 10mA 1.0 0.8 0.6 0.4 0.2 -4 0 20 40 60 Ambient temperature 80 Ta 0 -40 100 () -20 0 20 40 Ambient temperature 7 60 Ta () 2007-10-01 TLP127 RESTRICTIONS ON PRODUCT USE 20070701-EN * The information contained herein is subject to change without notice. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 8 2007-10-01