a 16035 Vineyard Blvd. Morgan Hill, CA 95037 p 408 225 4314 f 408 225 2079 e www.allsensors.com all sensors
All Sensors DS-0028 Rev D
Pressure Response: for any pressure applied the response time to get to 90% of pressure applied is typically less than 500 useconds.
Specication Notes
note 1: All pArAmeters Are meAsured At 5.0 volt excitAtion, for the nominAl full scAle pressure And room temperAture unless otherwise specified. pressure meAsurements Are with
positive pressure Applied to port B. ABsolute devices require pressure to Be Applied to port A.
note 2: shift is relAtive to 25°c over the compensAted temperAture rAnge.
note 3: meAsured At one-hAlf full scAle rAted pressure using Best strAight line curve fit.
note 4: the spAn is the AlgeBrAic difference Between full scAle output voltAge And the offset voltAge.
Parameter, note 1
Output Span, note 4 (FSS)
Oset Voltage @ zero gage pressure
Oset Temperature Shift, note 2
Linearity, hysteresis error, note 3
Span Temperature Shift, note 2
Minimum
3.90
0.15
--
--
--
Nominal
4.0
0.25
--
--
--
Maximum
4.10
0.35
±20.0
±0.5
±1.0
Units
V
V
mV
%FSS
%FSS
Performance Characteristics for 150 PSI-G-4V
Parameter, note 1
Output Span, note 4 (FSS)
Oset Voltage @ zero dierential pressure
Oset Temperature Shift, note 2
Linearity, hysteresis error, note 3
Span Temperature Shift, note 2
Minimum
±1.90
2.15
--
--
--
Nominal
±2.0
2.25
--
--
--
Maximum
±2.10
2.35
±20.0
±0.5
±1.0
Units
V
V
mV
%FSS
%FSS
Performance Characteristics for 150 PSI-D-4V
Parameter, note 1
Output Voltage @ 1,100 mbar
Output Voltage @ 600 mbar
Oset Temperature Shift, note 2
Linearity, hysteresis error, note 3
Span Temperature Shift, note 2
Minimum
4.20
0.20
--
--
--
Nominal
4.25
0.25
--
0.05
--
Maximum
4.30
0.30
±20.0
±0.25
±1.0
Units
V
V
mV
%FSS
%FSS
Performance Characteristics for BARO-A-4V