●
●
●
●
●
●
●
●Lead temperature for soldering purpose: 260°C max. for 10 sec
● 50 units per plastic tube
Parameter Test
Conditions
Symbol Value Unit
Maximum Repetitive Peak Reverse Voltage VRRM 60 V
Working Peak Reverse Voltage VRWM 60 V
Maximum DC Blocking Voltage VDC 60 V
Maximum Average Forward Rectified Current
@ Tc=105°C
IF(AV) 10 A
Peak Forward Surge Current 8.3ms Single Half Sine-wave
Superimposed on Rated Load per Diode
IFSM 120 A
Operating Junction Temperature Range TJ - 55 to+150 °C
Storage Temperature Range TSTG - 55 to+150 °C
VAC 1500
Maximum Instantaneous Forward Voltage per Leg IF=5A
IF=5A
TC=25°C
TC=125°C
VF
0.80
0.70
V
Maximum Reverse Current per Leg at Working
Peak Reverse Voltage
TJ=25°C
TJ=100°C
IR 200
15
μA
mA
Thermal Characteristics (TA=25°C unless otherwise noted)
Symbol Parameter Typ.(TO-220-AB) Typ.(ITO-220-AB) Unit
RθJC Thermal Resistance, Junction to Case per Leg 2.0 4.0 °C/W
RθJA Thermal Resistance, Junction to Ambient per Leg 62.5 62.5 °C/W
Note: Pulse test:300us pulse width, duty cycle=2%
Maximum Ratings & Electrical Characteristics
(TA=25°C unless otherwise noted)
1/3
Case: epoxy, molded
Weight: 1.9grams (approximately)
Finish: all external surfaces corrosion resistant and terminal leads readily solderable
MBR1060CT/MBRF1060CT
Schottky Barrier Rectifier
Reverse Voltage 60 V Forward Current 10 A
Schematic Diagram
Mechanical Data
Features
MBRF1060CT
Package:
I
T
O-220-AB
MBR1060CT
Package: TO-220-AB
Voltage Rate of Change (rated VR) DV/dt 10000 V/μs
Total Device
Per Diode 5
Plastic package has underwriters Laboratory
Flammability Classification 94V-0
Dual rectifier construction, positive center tap
Low forward voltage, high efficiency
Guarding for over voltage protection
Peak repetitive Reverse Current Per Leg at tp=2.0μs ,1KHz 1.0
IRRM A
V
Isolation Voltage (ITO-220-AB only) from Terminal to Heatsink
t = 1 sec