IPI076N12N3 G IPP076N12N3 G
OptiMOSTM3 Power-Transistor
Features
• N-channel, normal level
• Excellent gate charge x RDS(on) product (FOM)
• Very low on-resistance RDS(on)
• 175 °C operating temperature
• Pb-free lead plating; RoHS compliant; halogen free
• Qualified according to JEDEC1) for target application
• Ideal for high-frequency switching and synchronous rectification
Maximum ratings, at Tj=25 °C, unless otherwise specified
Parameter Symbol Conditions Unit
Continuous drain current
IDTC=25 °C 100 A
TC=100 °C 76
Pulsed drain current2) ID,pulse TC=25 °C 400
Avalanche energy, single pulse
EAS ID=100 A, RGS=25 W230 mJ
Gate source voltage3) VGS ±20 V
Power dissipation
Ptot TC=25 °C 188 W
Operating and storage temperature
Tj, Tstg -55 ... 175 °C
IEC climatic category; DIN IEC 68-1 55/175/56
Value
VDS
120
V
RDS(on)max
7.6
mW
ID
100
A
Type
IPI076N12N3 G
IPP076N12N3 G
Package
PG-TO262-3
PG-TO220-3
Marking
076N12N
076N12N
Rev. 2.4 page 1 2013-09-25
IPI076N12N3 G IPP076N12N3 G
Parameter Symbol Conditions Unit
min. typ. max.
Thermal characteristics
Thermal resistance, junction - case
RthJC - - 0.8 K/W
RthJA minimal footprint - - 62
6 cm2 cooling area5) - - 40
Electrical characteristics, at Tj=25 °C, unless otherwise specified
Static characteristics
Drain-source breakdown voltage
V(BR)DSS VGS=0 V, ID=1 mA 120 - - V
Gate threshold voltage
VGS(th) VDS=VGS, ID=130 µA 2 3 4
Zero gate voltage drain current
IDSS
VDS=100 V, VGS=0 V,
Tj=25 °C
-0.1 1µA
VDS=100 V, VGS=0 V,
Tj=125 °C
-10 100
Gate-source leakage current
IGSS VGS=20 V, VDS=0 V - 1 100 nA
Drain-source on-state resistance
RDS(on) VGS=10 V, ID=100 A -6.5 7.6 mΩ
Gate resistance
RG-1.5 -W
Transconductance
gfs
|VDS|>2|ID|RDS(on)max,
ID=100 A
58 116 - S
Values
2) See figure 3
Thermal resistance, junction 4) -
ambient
1)J-STD20 and JESD22
3) Tjmax=150 °C and duty cycle D=0.01 for Vgs<-5V
4) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain
connection. PCB is vertical in still air.
Rev. 2.4 page 2 2013-09-25
IPI076N12N3 G IPP076N12N3 G
Parameter Symbol Conditions Unit
min. typ. max.
Dynamic characteristics
Input capacitance
Ciss -4990 6640 pF
Output capacitance
Coss -632 841
Reverse transfer capacitance
Crss -31 -
Turn-on delay time
td(on) -24 -ns
Rise time
tr-50 -
Turn-off delay time
td(off) -39 -
Fall time
tf-10 -
Gate Charge Characteristics5)
Gate to source charge
Qgs -27 -nC
Gate to drain charge
Qgd -19 -
Switching charge
Qsw -31 -
Gate charge total
Qg-76 101
Gate plateau voltage
Vplateau -5.4 - V
Output charge
Qoss VDD=60 V, VGS=0 V -87 116 nC
Reverse Diode
Diode continous forward current IS- - 100 A
Diode pulse current
IS,pulse - - 400
Diode forward voltage
VSD
VGS=0 V, IF=100 A,
Tj=25 °C
- 1 1.2 V
Reverse recovery time
trr -122 ns
Reverse recovery charge
Qrr -291 nC
5) See figure 16 for gate charge parameter definition
VR=60 V, IF=IS,
diF/dt=100 A/µs
TC=25 °C
Values
VGS=0 V, VDS=60 V,
f=1 MHz
VDD=60 V, VGS=10 V,
ID=100 A,
RG,ext=1.6 W
VDD=60 V, ID=100 A,
VGS=0 to 10 V
Rev. 2.4 page 3 2013-09-25
IPI076N12N3 G IPP076N12N3 G
1 Power dissipation 2 Drain current
Ptot=f(TC)ID=f(TC); VGS≥10 V
3 Safe operating area 4 Max. transient thermal impedance
ID=f(VDS); TC=25 °C; D=0 ZthJC=f(tp)
parameter: tpparameter: D=tp/T
single pulse
0.01
0.02
0.05
0.1
0.2
0.5
10-5
10-4
10-3
10-2
10-1
100
10-2
10-1
100
ZthJC [K/W]
tp [s]
0
40
80
120
160
200
0 50 100 150 200
Ptot [W]
TC [°C]
0
20
40
60
80
100
120
0 50 100 150 200
ID [A]
TC [°C]
1 µs
10 µs
100 µs
1 ms
10 ms
DC
10-1
100
101
102
103
10-1
100
101
102
103
ID [A]
VDS [V]
Rev. 2.4 page 4 2013-09-25
IPI076N12N3 G IPP076N12N3 G
5 Typ. output characteristics 6 Typ. drain-source on resistance
ID=f(VDS); Tj=25 °C RDS(on)=f(ID); Tj=25 °C
parameter: VGS parameter: VGS
7 Typ. transfer characteristics 8 Typ. forward transconductance
ID=f(VGS); |VDS|>2|ID|RDS(on)max gfs=f(ID); Tj=25 °C
parameter: Tj
4.5 V
5 V
5.5 V
6 V
10 V
0
5
10
15
20
0 50 100 150
RDS(on) [mW]
ID [A]
25 °C
175 °C
0
50
100
150
200
0 2 4 6 8
ID [A]
VGS [V]
0
20
40
60
80
100
120
140
160
0 40 80 120 160
gfs [S]
ID [A]
4.5 V
5 V
5.5 V
6 V
6.5 V
7 V
8 V
10 V
0
50
100
150
200
250
300
350
0 1 2 3 4 5
ID [A]
VDS [V]
Rev. 2.4 page 5 2013-09-25
IPI076N12N3 G IPP076N12N3 G
9 Drain-source on-state resistance 10 Typ. gate threshold voltage
RDS(on)=f(Tj); ID=100 A; VGS=10 V VGS(th)=f(Tj); VGS=VDS
parameter: ID
11 Typ. capacitances 12 Forward characteristics of reverse diode
C=f(VDS); VGS=0 V; f=1 MHz IF=f(VSD)
parameter: Tj
typ
98 %
0
5
10
15
20
-60 -20 20 60 100 140 180
RDS(on) [mW]
Tj [°C]
130 µA
1300 µA
0
0.5
1
1.5
2
2.5
3
3.5
4
-60 -20 20 60 100 140 180
VGS(th) [V]
Tj [°C]
Ciss
Coss
Crss
101
102
103
104
0 20 40 60 80
C [pF]
VDS [V]
25 °C
175 °C
25 °C, 98%
175 °C, 98%
100
101
102
103
0 0.5 1 1.5 2
IF [A]
VSD [V]
Rev. 2.4 page 6 2013-09-25
IPI076N12N3 G IPP076N12N3 G
13 Avalanche characteristics 14 Typ. gate charge
IAS=f(tAV); RGS=25 WVGS=f(Qgate); ID=75 A pulsed
parameter: Tj(start) parameter: VDD
15 Drain-source breakdown voltage 16 Gate charge waveforms
VBR(DSS)=f(Tj); ID=1 mA
24V
60 V
96 V
0
2
4
6
8
10
0 20 40 60 80
VGS [V]
Qgate [nC]
105
110
115
120
125
130
135
-60 -20 20 60 100 140 180
VBR(DSS) [V]
Tj [°C]
VGS
Qgate
Vgs(th)
Qg(th)
Qgs
Qgd
Qsw
Qg
25 °C
100 °C
150 °C
100
101
102
103
100
101
102
103
IAS [A]
tAV [µs]
Rev. 2.4 page 7 2013-09-25
IPI076N12N3 G IPP076N12N3 G
PG-TO220-3: Outline
Rev. 2.4 page 8 2013-09-25
IPI076N12N3 G IPP076N12N3 G
PG-TO262-3-1 (I²PAK)
Rev. 2.4 page 9 2013-09-25
IPI076N12N3 G IPP076N12N3 G
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2009 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of
conditions or characteristics. With respect to any examples or hints given herein, any typical
values stated herein and/or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please
contact the nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information
on the types in question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with
the express written approval of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-support device or system or to affect
the safety or effectiveness of that device or system. Life support devices or systems are
intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user
or other persons may be endangered.
Rev. 2.4 page 10 2013-09-25