*seireSPGM*seireSMHM
)sisabmotsucnoliavampp51&01(RCT ,dtsC°/mpp001 liavampp05&52 ,dtsC°/mpp001 liavampp05&52
egnaRerutarepmeTgnitarepOC°551+ot55-C°571+ot56-
C°07evobagnitareDrewoPC°/%81.1C°/%59.
)C°032@ces5(ytilibaredloSegarevoc%59egarevoc%59
)yrD(ecnatsiseRnoitalusnIM000,01 M000,01
x5.2@.ces5(daolrevOemiT-trohS )gnitaregatlovx2deecxeottonrewop 52.0 %)S.tpO%5.0( %520. )S.tpO%50.(
).ces5,C°062(taeHredloSot.siseR%2.0%20.
)C°021+C°05-(gnilcyCerutarepmeT%5.0%20.
M(erutsioMi -liM&601M202dtS-lR-)24355
**%5.0**%50.
)rewopdetarsruoh0001(efiLdaoL)S.tpO%1(%5.0)S.tpO%2.(%1.
PULSE WITHSTAND CHART (increased pulse levels avail.)
MGP SERIES - Conformal Coated
MHM SERIES - Hermetic Sealed
METAL FILM MELF RESISTORS
Metal film performance, economical price!
RCD Series MGP melf* resistors utilize precision film technology
which is inherently low inductance, low noise, and high stability
even after extended periods. Heavy solder plating assures
excellent solderability and long shelf life. Series MHM offers
hermetically sealed environmental protection and utmost
reliability. MGP series parts are color banded, MHM are alphanu-
merically marked with resistance and tolerance. *Melf = metal
electrode face-bonded (cylindrical component).
OPTIONS
Option S: Increased power (refer to chart below)
Option P: Increased pulse capability
Option F: Flameproof coating (per UL94V0)
Dozens of additional options are available... burn-in, special
marking, non-standard values, high frequency designs,
matched sets, temp. sensitive, zero-ohm jumpers, etc.
Customized components are an RCD specialty!
Pulse capability is dependent on res. value, waveform, repetition rate,
current, etc. Chart is a general guide for Opt. P pulse resistant version,
single pulse, with peak voltage levels not exceeding 1KV for MGP55SP,
700V MGP50SP, and 350V MGP45SP. Max pulse capability for standard
parts (w/o Opt.P) is 60% less. For improved performance and reliability,
a 30-50% pulse derating factor is recommended (or larger for frequent
pulses, high values, etc). Consult RCD for application assistance. Verify
selection by evaluating under worst-case conditions.
APPLICA TION NOTE #1: T emperature Rise (THS)
The THS of SM resistors depends largely on heat conduction through the
end terminations, which can vary significantly depending on PCB
material and layout (i.e. pad size, trace area, copper thickness, air flow ,
etc.). T ypical temp. rise at full rated power is 30-50°C (Opt.S=50-70°C).
APPLICA TION NOTE #2: Resistor Selection
MGP resistors are ideal for semi-precision SM applications and are
generally more economical than thin film rectangular chips. For less
critical applications, consider low cost MCF carbon film melf resistors.
For increased performance, especially in high humidity applications
(such as Naval or tropical environments), consider MHM series. If flat
chips are preferred, consider BLU series (precision) or MC series (semi-
precision/ general purpose). For higher power, consider MPF series.
Industrys widest selection of metal film MELF resistors-
.1W to .5W , 0.1 to 22M, 0.1% to 5%, 10ppm to 100ppm/°C
Low cost, quick delivery (available on SWIFTTM program)
Precision performance, excellent environmental stability
Series MHM hermetic sealed is an industry first!
SPECIFICATIONS
1 Max working voltage determined E= √(PxR), not to exceed the value listed. 2 Consult factory for non-standard range 3 Preliminary
Inch [mm]
LD
W
t
PERFORMANCE
* Typical performance levels listed are for standard products from 10 to 1M.
Consult factory for performance levels of extended range and modified designs.
** To ensure utmost reliability, care should be taken to avoid potential sources of
ionic contamination
DCR epyT Wegatta )dtS( egattaW )'S'.tpO( egatloV gnitaR
2,1
ecnatsiseR egnaR
2
cirtceleiD htgnertS
2
]3.[210.±L]2.[800.±D).niM(W )xaM(t
2
54PGMW1.W51.V0011M1otV002]0.2[970.]21.1[440.]3.[210.]670.[300.
05PGMW521.W52.V00281.0 M01otV052]4.3[531.]54.1[750.]5.[20.]1.[400.
55PGMW52.W5.V0521.0 M22otV053]9.5[232.]51.2[580.]6.[420.]51.[600.
55MHM
3
W521.W52.V05201K002otV053]0.7[572.]50.3[021.]72.1[050.]51.[600.
MGP55SP
MGP50SP
MGP45SP
1uS 10uS 100uS 1mS 10mS 100mS
Pulse Duration
Peak Power (Watts)
1000
100
10
1
RESISTORSCAPACITOR
S
C
OILSDELAY
LINES
FA031D Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
Optional TC: 10=10ppm, 25=25ppm, 50=50ppm (leave blank if std)
P/N DESIGNA TION:
RCD Type
Tolerance: F=1% (std), B=0.1%, C=.25%, D=.5%, G=2%, J=5%
Packaging : B = Bulk, T = Tape & Reel
MGP50 - 1002 - F T W
Options: S, P, F (leave blank if std)
Resis. Code:
1%: 3 signif. figures & multiplier,
e.g. R100= 0.1, 1R00= 1, 10R0=10 ,1000= 100, 1001= 1K.
Resis. Code 2% - 10%: 2 signif. figures & multiplier,
e.g. R10= 0.1Ω, 1R0= 1,100= 10, 101=100,102= 1K, 103=10K.
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
RCD C omponents Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
20
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible